The AdvSIMD pass may produce copies that are not coalescer-friendly. The
peephole optimizer knows how to fix that as demonstrated in the test case.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216200 91177308-0d34-0410-b5e6-96231b3b80d8
There are two add-immediate instructions in Thumb1: tADDi8 and tADDi3. Only
the latter supports using different source and destination registers, so
whenever we materialize a new base register (at a certain offset) we'd do
so by moving the base register value to the new register and then adding in
place. This patch changes the code to use a single tADDi3 if the offset is
small enough to fit in 3 bits.
Differential Revision: http://reviews.llvm.org/D5006
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216193 91177308-0d34-0410-b5e6-96231b3b80d8
The FPv4-SP floating-point unit is generally referred to as
single-precision only, but it does have double-precision registers and
load, store and GPR<->DPR move instructions which operate on them.
This patch enables the use of these registers, the main advantage of
which is that we now comply with the AAPCS-VFP calling convention.
This partially reverts r209650, which added some AAPCS-VFP support,
but did not handle return values or alignment of double arguments in
registers.
This patch also adds tests for Thumb2 code generation for
floating-point instructions and intrinsics, which previously only
existed for ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216172 91177308-0d34-0410-b5e6-96231b3b80d8
advanced copy optimization.
This is the final step patch toward transforming:
udiv r0, r0, r2
udiv r1, r1, r3
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
bx lr
into:
udiv r0, r0, r2
udiv r1, r1, r3
bx lr
Indeed, thanks to this patch, this optimization is able to look through
vmov.32 d16[0], r0
vmov.32 d16[1], r1
and is able to rewrite the following sequence:
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
into simple generic GPR copies that the coalescer managed to remove.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216144 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for PR20648 - http://llvm.org/bugs/show_bug.cgi?id=20648
This patch checks the operands of a vselect to see if all values are constants.
If yes, bail out of any further attempts to create a blend or shuffle because
SelectionDAGLegalize knows how to turn this kind of vselect into a single load.
This already happens for machines without SSE4.1, so the added checks just send
more targets down that path.
Differential Revision: http://reviews.llvm.org/D4934
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216121 91177308-0d34-0410-b5e6-96231b3b80d8
The goal of the patch is to implement section 3.2.3 of the AMD64 ABI
correctly. The controlling sentence is, "The size of each argument gets
rounded up to eightbytes. Therefore the stack will always be eightbyte
aligned." The equivalent sentence in the i386 ABI page 37 says, "At all
times, the stack pointer should point to a word-aligned area." For both
architectures, the stack pointer is not being rounded up to the nearest
eightbyte or word between the last normal argument and the first
variadic argument.
Patch by Thomas Jablin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216119 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This fixes http://llvm.org/bugs/show_bug.cgi?id=19530.
The problem is that X86ISelLowering erroneously thought the third call
was eligible for tail call elimination.
It would have been if it's return value was actually the one returned
by the calling function, but here that is not the case and
additional values are being returned.
Test Plan: Test case from the original bug report is included.
Reviewers: rafael
Reviewed By: rafael
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D4968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216117 91177308-0d34-0410-b5e6-96231b3b80d8
In PR20308 ( http://llvm.org/bugs/show_bug.cgi?id=20308 ), the critical-anti-dependency breaker
caused a miscompile because it broke a WAR hazard using a register that it thinks is available
based on info from a kill inst. Until PR18663 is solved, we shouldn't use any def/use info from
a kill because they are really just nops.
This patch adds guard checks for kills around calls to ScanInstruction() where the DefIndices
array is set. For good measure, add an assert in ScanInstruction() so we don't hit this bug again.
The test case is a reduced version of the code from the bug report.
Differential Revision: http://reviews.llvm.org/D4977
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216114 91177308-0d34-0410-b5e6-96231b3b80d8
the isRegSequence property.
This is a follow-up of r215394 and r215404, which respectively introduces the
isRegSequence property and uses it for ARM.
Thanks to the property introduced by the previous commits, this patch is able
to optimize the following sequence:
vmov d0, r2, r3
vmov d1, r0, r1
vmov r0, s0
vmov r1, s2
udiv r0, r1, r0
vmov r1, s1
vmov r2, s3
udiv r1, r2, r1
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
bx lr
into:
udiv r0, r0, r2
udiv r1, r1, r3
vmov.32 d16[0], r0
vmov.32 d16[1], r1
vmov r0, r1, d16
bx lr
This patch refactors how the copy optimizations are done in the peephole
optimizer. Prior to this patch, we had one copy-related optimization that
replaced a copy or bitcast by a generic, more suitable (in terms of register
file), copy.
With this patch, the peephole optimizer features two copy-related optimizations:
1. One for rewriting generic copies to generic copies:
PeepholeOptimizer::optimizeCoalescableCopy.
2. One for replacing non-generic copies with generic copies:
PeepholeOptimizer::optimizeUncoalescableCopy.
The goals of these two optimizations are slightly different: one rewrite the
operand of the instruction (#1), the other kills off the non-generic instruction
and replace it by a (sequence of) generic instruction(s).
Both optimizations rely on the ValueTracker introduced in r212100.
The ValueTracker has been refactored to use the information from the
TargetInstrInfo for non-generic instruction. As part of the refactoring, we
switched the tracking from the index of the definition to the actual register
(virtual or physical). This one change is to provide better consistency with
register related APIs and to ease the use of the TargetInstrInfo.
Moreover, this patch introduces a new helper class CopyRewriter used to ease the
rewriting of generic copies (i.e., #1).
Finally, this patch adds a dead code elimination pass right after the peephole
optimizer to get rid of dead code that may appear after rewriting.
This is related to <rdar://problem/12702965>.
Review: http://reviews.llvm.org/D4874
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216088 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug I introduced in a previous commit (r216033). Sign-/Zero-
extension from i1 cannot be folded into the ADDS/SUBS instructions. Instead both
operands have to be sign-/zero-extended with separate instructions.
Related to <rdar://problem/17913111>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216073 91177308-0d34-0410-b5e6-96231b3b80d8
legalization stage. With those two optimizations, fewer signed/zero extension
instructions can be inserted, and then we can expose more opportunities to
Machine CSE pass in back-end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216066 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM generates illegal `rbit r0, #352` instruction for rbit intrinsic.
According to ARM ARM, rbit only takes register as argument, not immediate.
The correct instruction should be rbit <Rd>, <Rm>.
The bug was originally introduced in r211057.
Differential Revision: http://reviews.llvm.org/D4980
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216064 91177308-0d34-0410-b5e6-96231b3b80d8
Use FMOVWSr/FMOVXDr instead of FMOVSr/FMOVDr, which have the proper register
class to be used with the zero register. This makes the MachineInstruction
verifier happy again.
This is related to <rdar://problem/18027157>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216040 91177308-0d34-0410-b5e6-96231b3b80d8
Factor out the ADDS/SUBS instruction emission code into helper functions and
make the helper functions more clever to support most of the different ADDS/SUBS
instructions the architecture support. This includes better immedediate support,
shift folding, and sign-/zero-extend folding.
This fixes <rdar://problem/17913111>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216033 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the missing test that I promised for r215753 to test the
materialization of the floating-point value +0.0.
Related to <rdar://problem/18027157>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216019 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. Reapply
without any modifications.
Original commit message:
FastISel didn't take much advantage of the different addressing modes available
to it on AArch64. This commit allows the ComputeAddress method to recognize more
addressing modes that allows shifts and sign-/zero-extensions to be folded into
the memory operation itself.
For Example:
lsl x1, x1, #3 --> ldr x0, [x0, x1, lsl #3]
ldr x0, [x0, x1]
sxtw x1, w1
lsl x1, x1, #3 --> ldr x0, [x0, x1, sxtw #3]
ldr x0, [x0, x1]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216013 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. Reapply
without any modifications.
Original commit message:
In the large code model for X86 floating-point constants are placed in the
constant pool and materialized by loading from it. Since the constant pool
could be far away, a PC relative load might not work. Therefore we first
materialize the address of the constant pool with a movabsq and then load
from there the floating-point value.
Fixes <rdar://problem/17674628>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216012 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. Reapply
without any modifications.
Original commit message:
This mostly affects the i64 value type, which always resulted in an 15byte
mobavsq instruction to materialize any constant. The custom code checks the
value of the immediate and tries to use a different and smaller mov
instruction when possible.
This fixes <rdar://problem/17420988>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216010 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. Reapply
without any modifications.
Original commit message:
This change materializes now the value "0" from the zero register.
The zero register can be folded by several instruction, so no
materialization is need at all.
Fixes <rdar://problem/17924413>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216009 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. This commit
exposed a latent bug that was fixed in r215753. Therefore it is reapplied
without any modifications.
I run it through SPEC2k and SPEC2k6 for AArch64 and it didn't introduce any new
regeressions.
Original commit message:
This changes the order in which FastISel tries to materialize a constant.
Originally it would try to use a simple target-independent approach, which
can lead to the generation of inefficient code.
On X86 this would result in the use of movabsq to materialize any 64bit
integer constant - even for simple and small values such as 0 and 1. Also
some very funny floating-point materialization could be observed too.
On AArch64 it would materialize the constant 0 in a register even the
architecture has an actual "zero" register.
On ARM it would generate unnecessary mov instructions or not use mvn.
This change simply changes the order and always asks the target first if it
likes to materialize the constant. This doesn't fix all the issues
mentioned above, but it enables the targets to implement such
optimizations.
Related to <rdar://problem/17420988>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216006 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a few BuildMI callsites where the result register was added by
using addReg, which is per default a use and therefore an operand register.
Also use the zero register as result register when emitting a compare
instruction (SUBS with unused result register).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215997 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the AArch64 backend to handle fadd, fsub, fmul and fdiv
operations on f16 (half-precision) types by promoting to f32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215891 91177308-0d34-0410-b5e6-96231b3b80d8
Externally-defined functions with weak linkage should not be
tail-called on ARM or AArch64, as the AAELF spec requires normal calls
to undefined weak functions to be replaced with a NOP or jump to the
next instruction. The behaviour of branch instructions in this
situation (as used for tail calls) is implementation-defined, so we
cannot rely on the linker replacing the tail call with a return.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215890 91177308-0d34-0410-b5e6-96231b3b80d8
The set of functions defined in the RTABI was separated for no real reason.
This brings us closer to proper utilisation of the functions defined by the
RTABI. It also sets the ground for correctly emitting function calls to AEABI
functions on all AEABI conforming platforms.
The previously existing lie on the behaviour of __ldivmod and __uldivmod is
propagated as it is beyond the scope of the change.
The changes to the test are due to the fact that we now use the divmod functions
which return both the quotient and remainder and thus we no longer need to
invoke two functions on Linux (making it closer to EABI's behaviour).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215862 91177308-0d34-0410-b5e6-96231b3b80d8
When combining a pair of shuffle nodes, check if the combined shuffle mask is
trivially Undef. In case, immediately fold that pair of shuffles to Undef.
The lack of checks for undef masks was the root-cause of a poor-codegen bug
in the dag combiner.
Example:
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 1, i32 1, i32 6>
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 6>
%3 = shufflevector <4 x i32> %2, <4 x i32> undef, <4 x i32> <i32 1, i32 5, i32 3, i32 3>
Before this patch, on x86 (with -mcpu=corei7) we failed to fold the entire
sequence to Undef value and therefore we generated:
shufps $-123, %xmm1, $xmm0
pshufd $-46, %xmm0, %xmm0
With this patch, the entire shuffle sequence is folded to Undef and no
shuffles are generated in the output assembly.
Added new test cases to test 'combine-vec-shuffle-5.ll'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215797 91177308-0d34-0410-b5e6-96231b3b80d8
A byval object, even if allocated at a fixed offset (prescribed by the ABI) is
pointed to by IR values. Most fixed-offset stack objects are not pointed-to by
IR values, so the default is to assume this is not possible. However, we need
to override the default in this case (instruction scheduling can cause
miscompiles otherwise).
Fixes PR20280.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215795 91177308-0d34-0410-b5e6-96231b3b80d8
Ordinarily (shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2)
is only done if the add has one use. If the resulting constant
add can be folded into an addressing mode, force this to happen
for the pointer operand.
This ends up happening a lot because of how LDS objects are allocated.
Since the globals are allocated next to each other, acessing the first
element of the second object is directly indexed by a shifted pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215739 91177308-0d34-0410-b5e6-96231b3b80d8
