With the SVR4 ABI on PowerPC, vector arguments for vararg calls are passed differently depending on whether they are a fixed or a variable argument. Variable vector arguments always go into memory, fixed vector arguments are put
into vector registers. If there are no free vector registers available, fixed vector arguments are put on the stack.
The NumFixedArgs attribute allows to decide for an argument in a vararg call whether it belongs to the fixed or variable portion of the parameter list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74764 91177308-0d34-0410-b5e6-96231b3b80d8
- This more or less amounts to a revert of r65379. I'm curious to know what
happened that caused this variable to become unused.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74579 91177308-0d34-0410-b5e6-96231b3b80d8
have the alignment be calculated up front, and have the back-ends obey whatever
alignment is decided upon.
This allows for future work that would allow for precise no-op placement and the
like.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74564 91177308-0d34-0410-b5e6-96231b3b80d8
After much back and forth, I decided to deviate from ARM design and split LDR into 4 instructions (r + imm12, r + imm8, r + r << imm12, constantpool). The advantage of this is 1) it follows the latest ARM technical manual, and 2) makes it easier to reduce the width of the instruction later. The down side is this creates more inconsistency between the two sub-targets. We should split ARM LDR instruction in a similar fashion later. I've added a README entry for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74420 91177308-0d34-0410-b5e6-96231b3b80d8
Also, added a pattern for the thumb-2 MOV of shifted immediate since that can encode immediates not encodable by the 16-bit immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74288 91177308-0d34-0410-b5e6-96231b3b80d8
a bunch of code from all the targets, and eliminates nondeterministic
ordering of directives being emitted in the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74096 91177308-0d34-0410-b5e6-96231b3b80d8
createSCEV. Also, recognize UndefValue in createSCEV.
Change getIntegerSCEV's comment to avoid mentioning FP types,
and re-implement it in terms of getConstant instead of getUnknown.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74041 91177308-0d34-0410-b5e6-96231b3b80d8
C bindings. Change all the backend "Initialize" functions to have C linkage.
Change the "llvm/Config/Targets.def" header to use C-style comments to avoid
compile warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74026 91177308-0d34-0410-b5e6-96231b3b80d8
also some contribution from Jim Grosbach, Bob Wilson, and Evan Cheng.
I've done my best to consolidate the patches with those that were done by
Viktor Kutuzov and Anton Korzh from Access Softek, Inc. Let me know if missed
anything. I've completely reorganized the thumb2 td file, made more extensive
uses of multiclass, etc.
Test cases will be contributed later after I re-organize what's in svn first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73965 91177308-0d34-0410-b5e6-96231b3b80d8
predicate does not check if Thumb mode is enabled, and when in ARM mode
there are still some checks for constant-pool use that need to run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73887 91177308-0d34-0410-b5e6-96231b3b80d8
while experimenting. I'm reasonably sure this is correct, but please
tell me if these instructions have some strange property which makes this
change unsafe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73746 91177308-0d34-0410-b5e6-96231b3b80d8
into DarwinTargetAsmInfo.cpp. The remaining differences should
be evaluated. It seems strange that x86/arm has .zerofill but ppc
doesn't, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73742 91177308-0d34-0410-b5e6-96231b3b80d8
- Register allocator should resolve the second part of the hint (register number) before passing it to the target since it knows virtual register to physical register mapping.
- More fixes to get ARM load / store double word working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73671 91177308-0d34-0410-b5e6-96231b3b80d8
initialization of all targets (InitializeAllTargets.h) or assembler
printers (InitializeAllAsmPrinters.h). This is a step toward the
elimination of relinked object files, so that we can build normal
archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73543 91177308-0d34-0410-b5e6-96231b3b80d8
(this is the case when we have thumb vararg function with single
callee-saved register, which is handled separately).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73529 91177308-0d34-0410-b5e6-96231b3b80d8
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73381 91177308-0d34-0410-b5e6-96231b3b80d8
consecutive addresses togther. This makes it easier for the post-allocation pass
to form ldm / stm.
This is step 1. We are still missing a lot of ldm / stm opportunities because
of register allocation are not done in the desired order. More enhancements
coming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73291 91177308-0d34-0410-b5e6-96231b3b80d8
ABI. The missing piece is support for putting "homogeneous aggregates"
into registers.
Patch by Sandeep Patel!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73095 91177308-0d34-0410-b5e6-96231b3b80d8
to run last because it needs to know the exact size and position of every
basic block. Currently CodePlacementOpt is set up to run last. It might be
worthwhile to investigate reordering these passes, but for now, let's just
make it work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72037 91177308-0d34-0410-b5e6-96231b3b80d8
llvm.eh.sjlj.* for better clarity as to their purpose and scope. Add
a description of llvm.eh.sjlj.setjmp to ExceptionHandling.html.
(llvm.eh.sjlj.longjmp documentation coming when that implementation is
added).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71758 91177308-0d34-0410-b5e6-96231b3b80d8
booleans. This gives a better indication of what the "addReg()" is
doing. Remembering what all of those booleans mean isn't easy, especially if you
aren't spending all of your time in that code.
I took Jakob's suggestion and made it illegal to pass in "true" for the
flag. This should hopefully prevent any unintended misuse of this (by reverting
to the old way of using addReg()).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71722 91177308-0d34-0410-b5e6-96231b3b80d8
a supporting preliminary patch for GCC-compatible SjLJ exception handling. Note that these intrinsics are not designed to be invoked directly by the user, but
rather used by the front-end as target hooks for exception handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71610 91177308-0d34-0410-b5e6-96231b3b80d8
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
between registers and the stack may be required with the APCS ABI, but it
isn't tied to using a particular version of the ARM architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69978 91177308-0d34-0410-b5e6-96231b3b80d8
chained and "flagged" together. I also made a few changes to handle the
chain and flag values more consistently. I found these problems by
inspection so I'm not aware of anything that breaks because of them
(thus no testcase).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69977 91177308-0d34-0410-b5e6-96231b3b80d8
in the MachineFunction class, renaming it to addLiveIn for consistency with
the same method in MachineBasicBlock. Thanks for Anton for suggesting this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69615 91177308-0d34-0410-b5e6-96231b3b80d8
When compiling in Thumb mode, only the low (R0-R7) registers are available
for most instructions. Breaking the low registers into a new register class
handles this. Uses of R12, SP, etc, are handled explicitly where needed
with copies inserted to move results into low registers where the rest of
the code generator can deal with them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68545 91177308-0d34-0410-b5e6-96231b3b80d8
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66779 91177308-0d34-0410-b5e6-96231b3b80d8
and extern_weak_odr. These are the same as the non-odr versions,
except that they indicate that the global will only be overridden
by an *equivalent* global. In C, a function with weak linkage can
be overridden by a function which behaves completely differently.
This means that IP passes have to skip weak functions, since any
deductions made from the function definition might be wrong, since
the definition could be replaced by something completely different
at link time. This is not allowed in C++, thanks to the ODR
(One-Definition-Rule): if a function is replaced by another at
link-time, then the new function must be the same as the original
function. If a language knows that a function or other global can
only be overridden by an equivalent global, it can give it the
weak_odr linkage type, and the optimizers will understand that it
is alright to make deductions based on the function body. The
code generators on the other hand map weak and weak_odr linkage
to the same thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66339 91177308-0d34-0410-b5e6-96231b3b80d8
them are generic changes.
- Use the "fast" flag that's already being passed into the asm printers instead
of shoving it into the DwarfWriter.
- Instead of calling "MI->getParent()->getParent()" for every MI, set the
machine function when calling "runOnMachineFunction" in the asm printers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65379 91177308-0d34-0410-b5e6-96231b3b80d8
