becomes reachable when before it wasn't). Check to make sure that it's not null
before trying to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128434 91177308-0d34-0410-b5e6-96231b3b80d8
otool(1), this time with the needed fix for case sensitive file systems :) .
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128415 91177308-0d34-0410-b5e6-96231b3b80d8
The reassignment phase was able to move interference with a higher spill weight,
but it didn't happen very often and it was fairly expensive.
The existing interference eviction picks up the slack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128397 91177308-0d34-0410-b5e6-96231b3b80d8
removes one use of X which helps it pass the many hasOneUse() checks.
In my analysis, this turns up very often where X = A >>exact B and that can't be
simplified unless X has one use (except by increasing the lifetime of A which is
generally a performance loss).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128373 91177308-0d34-0410-b5e6-96231b3b80d8
The main register class may have been inflated by live range splitting, so that
register class is not necessarily valid for the snippet instructions.
Use the original register class for the stack slot interval.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128351 91177308-0d34-0410-b5e6-96231b3b80d8
It couldn't be used outside of the file because SDISelAsmOperandInfo
is local to SelectionDAGBuilder.cpp. Making it a static function avoids
a weird linkage dance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128342 91177308-0d34-0410-b5e6-96231b3b80d8
There are two ways that a later store can comletely overlap a previous store:
1. They both start at the same offset, but the earlier store's size is <= the
later's size, or
2. The earlier store's offset is > the later's offset, but it's offset + size
doesn't extend past the later's offset + size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128332 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly terminate the range of register DBG_VALUEs when the register is
clobbered or when the basic block ends.
The code is now ready to deal with variables that are sometimes in a register
and sometimes on the stack. We just need to teach emitDebugLoc to say 'stack
slot'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128327 91177308-0d34-0410-b5e6-96231b3b80d8
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128320 91177308-0d34-0410-b5e6-96231b3b80d8
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128308 91177308-0d34-0410-b5e6-96231b3b80d8
The .dot directives don't need labels, that is a leftover from when we created
line number info manually.
Instructions following a DBG_VALUE can share its label since the DBG_VALUE
doesn't produce any code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128284 91177308-0d34-0410-b5e6-96231b3b80d8
Add an assertion to linear scan to prevent it from allocating registers outside
the register class.
<rdar://problem/9183021>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128254 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128240 91177308-0d34-0410-b5e6-96231b3b80d8
Set the encoding bits to {0,?,?,0}, not 0. Plus delegate the disassembly of ADR to
the more generic ADDri/SUBri instructions, and add a test case for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128234 91177308-0d34-0410-b5e6-96231b3b80d8
The MC asm lexer wasn't honoring a non-default (anything but ';') statement
separator. Fix that, and generalize a bit to support multi-character
statement separators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128227 91177308-0d34-0410-b5e6-96231b3b80d8
entries being compared may not be ARMConstantPoolValue. Without checking
whether they are ARMConstantPoolValue first, and if the stars and moons
are aligned properly, the equality test may return true (when the first few
words of two Constants' values happen to be identical) and very bad things can
happen.
rdar://9125354
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128203 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add two test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128191 91177308-0d34-0410-b5e6-96231b3b80d8
were incomplete. The assert stmt needs to be updated and the operand index incrment is wrong.
Fix the bad logic and add some sanity checking to detect bad instruction encoding;
and add a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128186 91177308-0d34-0410-b5e6-96231b3b80d8
I'm backing this out for the second time. It was supposed to be fixed by r128164, but the mingw self-host must be defeating the fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128181 91177308-0d34-0410-b5e6-96231b3b80d8
int tries = INT_MAX;
while (tries > 0) {
tries--;
}
The check should be:
subs r4, #1
cmp r4, #0
bgt LBB0_1
The subs can set the overflow V bit when r4 is INT_MAX+1 (which loop
canonicalization apparently does in this case). cmp #0 would have cleared
it while not changing the N and Z bits. Since BGT is dependent on the V
bit, i.e. (N == V) && !Z, it is not safe to eliminate the cmp #0.
rdar://9172742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128179 91177308-0d34-0410-b5e6-96231b3b80d8
The ExecutionEngine constructor already added the module, so there's no
need to call addModule() directly. Doing so causes a double-free of the
Module at program termination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128171 91177308-0d34-0410-b5e6-96231b3b80d8
so the scheduler can't create new interferences on the copies
themselves. Prior to this fix the scheduler could get stuck in a loop
creating copies.
Fixes PR9509.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128164 91177308-0d34-0410-b5e6-96231b3b80d8
Each of these instructions may have a RegsClobberInsn entry that can't be
ignored. Consecutive ranges are coalesced later when DwarfDebug::emitDebugLoc
merges entries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128155 91177308-0d34-0410-b5e6-96231b3b80d8
I'm tired of doing this manually for each checkout.
If anyone knows a better way debug isel for non-trivial tests feel
free to revert and let me know how to do it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128132 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes kimwitu++, bullet, and tramp3dv4 with the ARM integrated assembler.
Fixes <rdar://problem/9165738>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128117 91177308-0d34-0410-b5e6-96231b3b80d8
This will extend the ranges of debug info variables in registers until they are
clobbered.
Fix 1: Don't mistake DBG_VALUE instructions referring to incoming arguments on
the stack with DBG_VALUE instructions referring to variables in the frame
pointer. This fixes the gdb test-suite failure.
Fix 2: Don't trace through copies to physical registers setting up call
arguments. These registers are call clobbered, and the source register is more
likely to be a callee-saved register that can be extended through the call
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128114 91177308-0d34-0410-b5e6-96231b3b80d8
VFP Load/Store Multiple Instructions used to embed the IA/DB addressing mode within the
MC instruction; that has been changed so that now, for example, VSTMDDB_UPD and VSTMDIA_UPD
are two instructions. Update the ARMDisassemblerCore.cpp's DisassembleVFPLdStMulFrm()
to reflect the change.
Also add a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128103 91177308-0d34-0410-b5e6-96231b3b80d8
Temporarily reverting these to see if we can get llvm-objdump to link. Hopefully this is not the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128097 91177308-0d34-0410-b5e6-96231b3b80d8
Support argument passing simple, common, prototypes directly. More
complicated scenarios will require building up a stub function, which the
MC-JIT isn't set up to handle yet.
Add Intercept.cpp, which is just a copy from ExecutionEngine/JIT for now,
to handle looking looking up external symbol names. This probably more
properly belongs as part of RuntimeDyld. It'll migrate there as things
flesh out more fully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128090 91177308-0d34-0410-b5e6-96231b3b80d8
Lots of cleanup to make the interfaces prettier, use the JITMemoryManager,
handle multiple functions and modules, etc.. This gets far enough that
the MCJIT compiles and runs code, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128052 91177308-0d34-0410-b5e6-96231b3b80d8
These ranges get completely jumbled by the post-ra scheduler, and it is not
really reasonable to expect it to make sense of them.
Instead, teach DwarfDebug to notice when user variables in registers are
clobbered, and terminate the ranges there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128045 91177308-0d34-0410-b5e6-96231b3b80d8
Move the dynamic linking functionality of the llvm-rtdyld program into an
ExecutionEngine support library. Update llvm-rtdyld to just load an object
file into memory, use the library to process it, then run the _main()
function, if one is found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128031 91177308-0d34-0410-b5e6-96231b3b80d8
the alias of an InstAlias instead of the thing being aliased. Because we need to
know the features that are valid for an InstAlias.
This is part of a work-in-progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127986 91177308-0d34-0410-b5e6-96231b3b80d8
gun as does. This makes it a lot easier to compare the output of both
as the addresses are now a lot closer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127972 91177308-0d34-0410-b5e6-96231b3b80d8
to have single return block (at least getting there) for optimizations. This
is general goodness but it would prevent some tailcall optimizations.
One specific case is code like this:
int f1(void);
int f2(void);
int f3(void);
int f4(void);
int f5(void);
int f6(void);
int foo(int x) {
switch(x) {
case 1: return f1();
case 2: return f2();
case 3: return f3();
case 4: return f4();
case 5: return f5();
case 6: return f6();
}
}
=>
LBB0_2: ## %sw.bb
callq _f1
popq %rbp
ret
LBB0_3: ## %sw.bb1
callq _f2
popq %rbp
ret
LBB0_4: ## %sw.bb3
callq _f3
popq %rbp
ret
This patch teaches codegenprep to duplicate returns when the return value
is a phi and where the phi operands are produced by tail calls followed by
an unconditional branch:
sw.bb7: ; preds = %entry
%call8 = tail call i32 @f5() nounwind
br label %return
sw.bb9: ; preds = %entry
%call10 = tail call i32 @f6() nounwind
br label %return
return:
%retval.0 = phi i32 [ %call10, %sw.bb9 ], [ %call8, %sw.bb7 ], ... [ 0, %entry ]
ret i32 %retval.0
This allows codegen to generate better code like this:
LBB0_2: ## %sw.bb
jmp _f1 ## TAILCALL
LBB0_3: ## %sw.bb1
jmp _f2 ## TAILCALL
LBB0_4: ## %sw.bb3
jmp _f3 ## TAILCALL
rdar://9147433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127953 91177308-0d34-0410-b5e6-96231b3b80d8
not have native support for this operation (such as X86).
The legalized code uses two vector INT_TO_FP operations and is faster
than scalarizing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127951 91177308-0d34-0410-b5e6-96231b3b80d8
The relevant instruction table entries were changed sometime ago to no longer take
<Rt2> as an operand. Modify ARMDisassemblerCore.cpp to accomodate the change and
add a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127935 91177308-0d34-0410-b5e6-96231b3b80d8
Proof-of-concept code that code-gens a module to an in-memory MachO object.
This will be hooked up to a run-time dynamic linker library (see: llvm-rtdyld
for similarly conceptual work for that part) which will take the compiled
object and link it together with the rest of the system, providing back to the
JIT a table of available symbols which will be used to respond to the
getPointerTo*() queries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127916 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm.dbg.value intrinsic refers to SSA values, not virtual registers, so we
should be able to extend the range of a value by tracking that value through
register copies. This greatly improves the debug value tracking for function
arguments that for some reason are copied to a second virtual register at the
end of the entry block.
We only extend the debug value range where its register is killed. All original
llvm.dbg.value locations are still respected.
Copies from physical registers are ignored. That should not be a problem since
the entry block already adds DBG_VALUE instructions for the virtual registers
holding the function arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127912 91177308-0d34-0410-b5e6-96231b3b80d8
- Emit mad instead of mad.rn for shader model 1.0
- Emit explicit mov.u32 instructions for reading global variables
- (most PTX instructions cannot take global variable immediates)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127895 91177308-0d34-0410-b5e6-96231b3b80d8
For example, on 32-bit architecture, don't promote all uses of the IV
to 64-bits just because one use is a 64-bit cast.
Alternate implementation of the patch by Arnaud de Grandmaison.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127884 91177308-0d34-0410-b5e6-96231b3b80d8
On MSVCRT and compatible, output of %e is incompatible to Posix by default. Number of exponent digits should be at least 2. "%+03d"
FIXME: Implement our formatter in future!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127872 91177308-0d34-0410-b5e6-96231b3b80d8
makes valgrind stop complaining about uninitialized variables being read when it
accesses a bitfield (category) that shares its bits with these variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127871 91177308-0d34-0410-b5e6-96231b3b80d8
Stack slot real estate is virtually free compared to registers, so it is
advantageous to spill earlier even though the same value is now kept in both a
register and a stack slot.
Also eliminate redundant spills by extending the stack slot live range
underneath reloaded registers.
This can trigger a dead code elimination, removing copies and even reloads that
were only feeding spills.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127868 91177308-0d34-0410-b5e6-96231b3b80d8
This is not supposed to happen, but I have seen the x86 rematter getting
confused when rematerializing partial redefs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127857 91177308-0d34-0410-b5e6-96231b3b80d8
comparisons on x86. Essentially, the way this works is that SUB+SBB sets
the relevant flags the same way a double-width CMP would.
This is a substantial improvement over the generic lowering in LLVM. The output
is also shorter than the gcc-generated output; I haven't done any detailed
benchmarking, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127852 91177308-0d34-0410-b5e6-96231b3b80d8
SCEV may generate expressions composed of multiple pointers, which can
lead to invalid GEP expansion. Until we can teach SCEV to follow strict
pointer rules, make sure no bad GEPs creep into IR.
Fixes rdar://problem/9038671.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127839 91177308-0d34-0410-b5e6-96231b3b80d8
o A8.6.195 STR (register) -- Encoding T1
o A8.6.193 STR (immediate, Thumb) -- Encoding T1
It has been changed so that now they use different addressing modes
and thus different MC representation (Operand Infos). Modify the
disassembler to reflect the change, and add relevant tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127833 91177308-0d34-0410-b5e6-96231b3b80d8
I have convinced myself that it can only happen when a phi value dies. When it
happens, allocate new virtual registers for the components.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127827 91177308-0d34-0410-b5e6-96231b3b80d8
rather than an int. Thankfully, this only causes LLVM to miss optimizations, not
generate incorrect code.
This just fixes the zext at the return. We still insert an i32 ZextAssert when
reading a function's arguments, but it is followed by a truncate and another i8
ZextAssert so it is not optimized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127766 91177308-0d34-0410-b5e6-96231b3b80d8
plus the test where it used to break.", which broke Clang self-host of a
Debug+Asserts compiler, on OS X.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127763 91177308-0d34-0410-b5e6-96231b3b80d8
report_fatal_error() invokes exit(). We know report_fatal_error() might not write messages to stderr when any errors were detected on FD == 2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127726 91177308-0d34-0410-b5e6-96231b3b80d8
chose is having a non-memcpy/memset use and being larger than any native integer
type. Originally I chose having an access of a size smaller than the total size
of the alloca, but this caused some minor issues on the spirit benchmark where
SRoA runs again after some inlining.
This fixes <rdar://problem/8613163>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127718 91177308-0d34-0410-b5e6-96231b3b80d8
1. The ARM Darwin *r9 call instructions were pseudo-ized recently.
Modify the ARMDisassemblerCore.cpp file to accomodate the change.
2. The disassembler was unnecessarily adding 8 to the sign-extended imm24:
imm32 = SignExtend(imm24:'00', 32); // A8.6.23 BL, BLX (immediate)
// Encoding A1
It has no business doing such. Removed the offending logic.
Add test cases to arm-tests.txt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127707 91177308-0d34-0410-b5e6-96231b3b80d8
accept. If a value in the mask is out of range, it uses the value 0, for VTBL,
or leaves the value unchanged, for VTBX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127700 91177308-0d34-0410-b5e6-96231b3b80d8
After live range splitting, an original value may be available in multiple
registers. Tracing back through the registers containing the same value, find
the best place to insert a spill, determine if the value has already been
spilled, or discover a reaching def that may be rematerialized.
This is only the analysis part. The information is not used for anything yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127698 91177308-0d34-0410-b5e6-96231b3b80d8
memory builtins as equivalent to malloc/free.
This is different from any attribute we have. For example, you can delete the
allocators when their result is unused, but you can't collapse two calls to the
same function, even if no global/memory state has changed in between. The
noalias return states that the result does not alias any other pointer, but
instcombine optimizes malloc() as though the result is non-null for the purpose
of eliminating unused pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127673 91177308-0d34-0410-b5e6-96231b3b80d8
v2 = bitcast v1
...
v3 = bitcast v2
...
= v3
=>
v2 = bitcast v1
...
= v1
if v1 and v3 are of in the same register class.
bitcast between i32 and fp (and others) are often not nops since they
are in different register classes. These bitcast instructions are often
left because they are in different basic blocks and cannot be
eliminated by dag combine.
rdar://9104514
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127668 91177308-0d34-0410-b5e6-96231b3b80d8
in the instruction tables and fixed a few bugs that
were causing decode conflicts. Rudimentary tests
are coming up in the next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127646 91177308-0d34-0410-b5e6-96231b3b80d8
instruction set. This code adds support for the VEX prefix
and for the YMM registers accessible on AVX-enabled
architectures. Instruction table support that enables AVX
instructions for the disassembler is in an upcoming patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127644 91177308-0d34-0410-b5e6-96231b3b80d8
register operand was erroneously added. Remove an incorrect assert which triggers the bug.
rdar://problem/9131529
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127642 91177308-0d34-0410-b5e6-96231b3b80d8
and then go kablooie. The problem was that it was tracking the PHI nodes anew
each time into this function. But it didn't need to. And because the recursion
didn't know that a PHINode was visited before, it would go ahead and call
itself.
There is a testcase, but unfortunately it's too big to add. This problem will go
away with the EH rewrite.
<rdar://problem/8856298>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127640 91177308-0d34-0410-b5e6-96231b3b80d8
Also more cleanly separate the ARM vs. Thumb functionality. Previously, the
encoding would be incorrect for some Thumb instructions (the indirect calls).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127637 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the unused reserved_ bit vector, no functional change intended.
This doesn't break 'svn blame', this file really is all my fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127607 91177308-0d34-0410-b5e6-96231b3b80d8