When canonicalizing dags according to the rule
(shl (zext (shr X, c1) ), c1) ==> (zext (shl (shr X, c1), c1))
remember to add the new shl dag to the DAGCombiner worklist of nodes.
If we don't explicitly add it to the worklist of nodes to visit, we
may not trigger later on the rule that folds the shift left + logical
shift right into a AND instruction with bitmask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192883 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the following:
typedef unsigned short ushort4U __attribute__((ext_vector_type(4),
aligned(2)));
typedef unsigned short ushort4 __attribute__((ext_vector_type(4)));
typedef unsigned short ushort8 __attribute__((ext_vector_type(8)));
typedef int int4 __attribute__((ext_vector_type(4)));
int4 __bbase_cvt_int(ushort4 v) {
ushort8 a;
a.lo = v;
return _mm_cvtepu16_epi32(a);
}
This generates the, not unreasonable, IR:
define <4 x i32> @foo0(double %v.coerce) nounwind ssp {
%tmp = bitcast double %v.coerce to <4 x i16>
%tmp1 = shufflevector <4 x i16> %tmp, <4 x i16> undef, <8 x i32> <i32
%0, i32 1, i32 2, i32 3, i32 undef, i32 undef, i32 undef, i32 undef>
%tmp2 = tail call <4 x i32> @llvm.x86.sse41.pmovzxwd(<8 x i16> %tmp1)
ret <4 x i32> %tmp2
}
The problem is when type legalization gets hold of the v4i16. It
legalizes that by spilling to the stack, then doing a zero-extending
load. Things go even more silly from there, ending up with something
like:
_foo0:
movsd %xmm0, -8(%rsp) <== Spill to the stack.
movq -8(%rsp), %xmm0 <== Reload it right back out.
pmovzxwd %xmm0, %xmm1 <== Here's what we actually asked for.
pblendw $1, %xmm1, %xmm0 <== We don't need this at all
pmovzxwd %xmm0, %xmm0 <== We already did this
ret
The v8i8 to v8i16 zext intrinsic gives even worse results, with two
table lookups via pshufb instructions(!!).
To avoid all that, we can move the bitcasting until after we've formed
the wider (legal) vector type. Then our normal codegen flows along
nicely and we get the expected:
_foo0:
pmovzxwd %xmm0, %xmm0
ret
rdar://15245794
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192866 91177308-0d34-0410-b5e6-96231b3b80d8
The reason this got reverted was that the @feat.00 symbol which was emitted
for every TU became quoted, and on cygwin/mingw we use the gas assembler which
couldn't handle the quotes.
This commit fixes the problem by only emitting @feat.00 for win32, where we use
clang -cc1as to assemble. gas would just drop this symbol anyway, so there is no
loss there.
With @feat.00 gone, there shouldn't be quoted symbols showing up on cygwin since
it uses the Itanium ABI, which doesn't put these funny characters in symbols.
> Because of win32 mangling, we produce symbol and section names with
> funny characters in them, most notably @ characters.
>
> MC would choke on trying to parse its own assembly output. This patch addresses
> that by:
>
> - Making @ trigger quoting of symbol names
> - Also quote section names in the same way
> - Just parse section names like other identifiers (to allow for quotes)
> - Don't assume @ signifies a symbol variant if it is in a string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192859 91177308-0d34-0410-b5e6-96231b3b80d8
This happens e.g. with <2 x i64> -1 on x86_32. It cannot be generated directly
because i64 is illegal. It would be nice if getNOT would handle this
transparently, but I don't see a way to generate a legal constant there right
now. Fixes PR17487.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192795 91177308-0d34-0410-b5e6-96231b3b80d8
GNU AS didn't like quotes in symbol names.
Error: junk at end of line, first unrecognized character is `"'
.def "@feat.00";
"@feat.00" = 1
Reproduced on Cygwin's 2.23.52.20130309 and mingw32's 2.20.1.20100303.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192775 91177308-0d34-0410-b5e6-96231b3b80d8
Because of win32 mangling, we produce symbol and section names with
funny characters in them, most notably @ characters.
MC would choke on trying to parse its own assembly output. This patch addresses
that by:
- Making @ trigger quoting of symbol names
- Also quote section names in the same way
- Just parse section names like other identifiers (to allow for quotes)
- Don't assume @ signifies a symbol variant if it is in a string.
Differential Revision: http://llvm-reviews.chandlerc.com/D1945
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192758 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the SelectionDAG scheduling preference to source
order. Soon, the SelectionDAG scheduler can be bypassed saving
a nice chunk of compile time.
Performance differences that result from this change are often a
consequence of register coalescing. The register coalescer is far from
perfect. Bugs can be filed for deficiencies.
On x86 SandyBridge/Haswell, the source order schedule is often
preserved, particularly for small blocks.
Register pressure is generally improved over the SD scheduler's ILP
mode. However, we are still able to handle large blocks that require
latency hiding, unlike the SD scheduler's BURR mode. MI scheduler also
attempts to discover the critical path in single-block loops and
adjust heuristics accordingly.
The MI scheduler relies on the new machine model. This is currently
unimplemented for AVX, so we may not be generating the best code yet.
Unit tests are updated so they don't depend on SD scheduling heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192750 91177308-0d34-0410-b5e6-96231b3b80d8
- Type of index used in extract_vector_elt or insert_vector_elt supposes
to be TLI.getVectorIdxTy() which is pointer type on most targets. It'd
better to truncate (or zero-extend in case it's changed later) it to
mask element type to guarantee they are matching instead of asserting
that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192722 91177308-0d34-0410-b5e6-96231b3b80d8
- Lower signed division by constant powers-of-2 to target-independent
DAG operators instead of target-dependent ones to support them better
on targets where vector types are legal but shift operators on that
types are illegal. E.g., on AVX, PSRAW is only available on <8 x i16>
though <16 x i16> is a legal type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192721 91177308-0d34-0410-b5e6-96231b3b80d8
rdar:15221834 False AVX register dependencies cause 5x slowdown on
flops-5/6 and significant slowdown on several others.
This was blocking the switch to MI-Sched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192669 91177308-0d34-0410-b5e6-96231b3b80d8
through bitcast, ptrtoint, and inttoptr instructions. This is valid
only if the related instructions are in that same basic block, otherwise
we may reference variables that were not live accross basic blocks
resulting in undefined virtual registers.
The bug was exposed when both SDISel and FastISel were used within the same
function, i.e., one basic block is issued with FastISel and another with SDISel,
as demonstrated with the testcase.
<rdar://problem/15192473>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192636 91177308-0d34-0410-b5e6-96231b3b80d8
a) x86-64 TLS has been documented
b) the code path should use movq for the correct relocation
to be generated.
I've also added a fixme for the test case that we should improve
the code generated, it should look something like is documented
in the tls abi document.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192631 91177308-0d34-0410-b5e6-96231b3b80d8
Per original comment, the intention of this loop
is to go ahead and break the critical edge
(in order to sink this instruction) if there's
reason to believe doing so might "unblock" the
sinking of additional instructions that define
registers used by this one. The idea is that if
we have a few instructions to sink "together"
breaking the edge might be worthwhile.
This commit makes a few small changes
to help better realize this goal:
First, modify the loop to ignore registers
defined by this instruction. We don't
sink definitions of physical registers,
and sinking an SSA definition isn't
going to unblock an upstream instruction.
Second, ignore uses of physical registers.
Instructions that define physical registers are
rejected for sinking, and so moving this one
won't enable moving any defining instructions.
As an added bonus, while virtual register
use-def chains are generally small due
to SSA goodness, iteration over the uses
and definitions (used by hasOneNonDBGUse)
for physical registers like EFLAGS
can be rather expensive in practice.
(This is the original reason for looking at this)
Finally, to keep things simple continue
to only consider this trick for registers that
have a single use (via hasOneNonDBGUse),
but to avoid spuriously breaking critical edges
only do so if the definition resides
in the same MBB and therefore this one directly
blocks it from being sunk as well.
If sinking them together is meant to be,
let the iterative nature of this pass
sink the definition into this block first.
Update tests to accomodate this change,
add new testcase where sinking avoids pipeline stalls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192608 91177308-0d34-0410-b5e6-96231b3b80d8
The alignment of allocated space was wrong, see Bugzila 17345.
Done by Zvi Rackover <zvi.rackover@intel.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192573 91177308-0d34-0410-b5e6-96231b3b80d8
This should fix the buildbots.
Original commit message:
[DAGCombiner] Slice a big load in two loads when the element are next to each
other in memory and the target has paired load and performs post-isel loads
combining.
E.g., this optimization will transform something like this:
a = load i64* addr
b = trunc i64 a to i32
c = lshr i64 a, 32
d = trunc i64 c to i32
into:
b = load i32* addr1
d = load i32* addr2
Where addr1 = addr2 +/- sizeof(i32), if the target supports paired load and
performs post-isel loads combining.
One should overload TargetLowering::hasPairedLoad to provide this information.
The default is false.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192476 91177308-0d34-0410-b5e6-96231b3b80d8
other in memory and the target has paired load and performs post-isel loads
combining.
E.g., this optimization will transform something like this:
a = load i64* addr
b = trunc i64 a to i32
c = lshr i64 a, 32
d = trunc i64 c to i32
into:
b = load i32* addr1
d = load i32* addr2
Where addr1 = addr2 +/- sizeof(i32), if the target supports paired load and
performs post-isel loads combining.
One should overload TargetLowering::hasPairedLoad to provide this information.
The default is false.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192471 91177308-0d34-0410-b5e6-96231b3b80d8
Bitcasting everything to i8* won't work. Autoupgrade the old
intrinsic declarations to use the new mangling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192117 91177308-0d34-0410-b5e6-96231b3b80d8
Regalloc can emit unaligned spills nowadays, but we can't fold the
spills into SSE ops if we can't guarantee alignment. PR12250.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192064 91177308-0d34-0410-b5e6-96231b3b80d8
The most likely case where this error happens is when the user specifies
too many register operands. Don't make it look like an internal LLVM bug
when we can see that the error is coming from an inline asm instruction.
For other instructions we keep the "ran out of registers" error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192041 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks for Dimitry Andric, Rafael Espindola, and Benjamin Kramer
for providing and progressively reducing the test case!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191782 91177308-0d34-0410-b5e6-96231b3b80d8
This change fixes the problem reported in pr17380 and re-add the dagcombine
transformation ensuring that the value types are always legal if the
transformation is triggered after Legalization took place.
Added the test case from pr17380.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191509 91177308-0d34-0410-b5e6-96231b3b80d8
(shl (zext (shr A, X)), X) => (zext (shl (shr A, X), X)).
The rule only triggers when there are no other uses of the
zext to avoid materializing more instructions.
This helps the DAGCombiner understand that the shl/shr
sequence can then be converted into an and instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191393 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes a copy from a vreg -> vreg sneaks into the middle of a terminator
sequence. It is safe to slice this into the stack protector success bb.
This fixes PR16979.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191260 91177308-0d34-0410-b5e6-96231b3b80d8
The recursive nature of the address selection code can cause the stack to
explode if there is a long chain of GEPs. Convert the recursive bit into a
iterative method to avoid this.
<rdar://problem/12445434>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191252 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX 256bit vectors are valid vectors and therefore the Type Legalizer doesn't
split the VSELECT and SETCC nodes. AVX only supports MIN/MAX on 128bit vectors
and this fix enables vector splitting for this special case in the X86 DAG
Combiner.
This fix is related to PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191131 91177308-0d34-0410-b5e6-96231b3b80d8
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask for the given target. This mask has usually
te same size as the VSELECT return type (except for Intel KNL). Now the type
legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191130 91177308-0d34-0410-b5e6-96231b3b80d8
C-like languages promote types like unsigned short to unsigned int before
performing an arithmetic operation. Currently the rotate matcher in the
DAGCombiner does not consider this situation.
This commit extends the DAGCombiner in the way that the pattern
(or (shl ([az]ext x), (*ext y)), (srl ([az]ext x), (*ext (sub 32, y))))
is folded into
([az]ext (rotl x, y))
The matching is restricted to aext and zext because in this cases the upper
bits are either undefined or known. Test case is included.
This fixes PR16726.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191049 91177308-0d34-0410-b5e6-96231b3b80d8
C-like languages promote types like unsigned short to unsigned int before
performing an arithmetic operation. Currently the rotate matcher in the
DAGCombiner does not consider this situation.
This commit extends the DAGCombiner in the way that the pattern
(or (shl ([az]ext x), (*ext y)), (srl ([az]ext x), (*ext (sub 32, y))))
is folded into
([az]ext (rotl x, y))
The matching is restricted to aext and zext because in this cases the upper
bits are either undefined or known. Test case is included.
This fixes PR16726.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191045 91177308-0d34-0410-b5e6-96231b3b80d8
When selecting the DAG (add (WrapperRIP ...), (FrameIndex ...)), X86 code had
spotted the FrameIndex possibility and was working out whether it could fold
the WrapperRIP into this.
The test for forming a %rip version is notionally whether we already have a
base or index register (%rip precludes both), but we were forgetting to account
for the register that would be inserted later to access the frame.
rdar://problem/15024520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190995 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We indicate that the object files are safe by emitting a @feat.00
absolute address symbol. The address is presumably interpreted as a
bitfield of features that the compiler would like to enable. Bit 0 is
documented in the PE COFF spec to opt in to "registered SEH", which is
what /safeseh enables.
LLVM's object files are safe by default because LLVM doesn't know how to
produce SEH handlers.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1691
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190898 91177308-0d34-0410-b5e6-96231b3b80d8
- check that -mcpu=slm uses the call register indirect optimization
- check that -mcpu=slm runs the scheduler
- check that -mcpu=slm supports the movbe instruction
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190814 91177308-0d34-0410-b5e6-96231b3b80d8
We used to generate the compact unwind encoding from the machine
instructions. However, this had the problem that if the user used `-save-temps'
or compiled their hand-written `.s' file (with CFI directives), we wouldn't
generate the compact unwind encoding.
Move the algorithm that generates the compact unwind encoding into the
MCAsmBackend. This way we can generate the encoding whether the code is from a
`.ll' or `.s' file.
<rdar://problem/13623355>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190290 91177308-0d34-0410-b5e6-96231b3b80d8
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190205 91177308-0d34-0410-b5e6-96231b3b80d8
Occasionally DAGCombiner can spot that a SETCC operation is completely
redundant and reduce it to "all true" or "all false". If this happens to a
vector, the value produced has to take account of what a normal comparison
would have produced, which may be an all-1s bitmask.
The fix in SelectionDAG.cpp is tested, however, as far as I can see the code in
TargetLowering.cpp is possibly unreachable and almost certainly irrelevant when
triggered so there are no tests. However, I believe it's still clearly the
right change and may save someone else some hassle if it suddenly becomes
reachable. So I'm doing it anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190147 91177308-0d34-0410-b5e6-96231b3b80d8
If the DAG already has only legal types, then the second round of DAG combines
is skipped. In this case VSELECT+SETCC patterns that match a more efficient
instruction (e.g. min/max) are never recognized.
This fix allows VSELECT+SETCC combines if the types are already legal before DAG
type legalization.
Reviewer: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190105 91177308-0d34-0410-b5e6-96231b3b80d8
Fast register pressure tracking currently only takes effect during
bottom up scheduling. Forcing this is a bit faster and simpler for
targets that don't have many scheduling constraints and don't need
top-down scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190014 91177308-0d34-0410-b5e6-96231b3b80d8
Only compare pressure within the same set. When multiple sets are
affected, we prioritize the most constrained set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189641 91177308-0d34-0410-b5e6-96231b3b80d8
Created SUPressureDiffs array to hold the per node PDiff computed during DAG building.
Added a getUpwardPressureDelta API that will soon replace the old
one. Compute PressureDelta here from the precomputed PressureDiffs.
Updating for liveness will come next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189640 91177308-0d34-0410-b5e6-96231b3b80d8
We want to convert code like (or (srl N, 8), (shl N, 8)) into (srl (bswap N),
const), but this is only valid if the bits above 16 on the source pattern are
0, the checks we were doing on this were slightly wrong before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189348 91177308-0d34-0410-b5e6-96231b3b80d8
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189282 91177308-0d34-0410-b5e6-96231b3b80d8
A single metadata will not span multiple lines. This also helps me with
my script to automatic update the testing cases.
A debug info testing case should have a llvm.dbg.cu.
Do not use hard-coded id for debug nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189033 91177308-0d34-0410-b5e6-96231b3b80d8
The small utility function that pattern matches Base + Index +
Offset patterns for loads and stores fails to recognize the base
pointer for loads/stores from/into an array at offset 0 inside a
loop. As a result DAGCombiner::MergeConsecutiveStores was not able
to merge all stores.
This commit fixes the issue by adding an additional pattern match
and also a test case.
Reviewer: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188936 91177308-0d34-0410-b5e6-96231b3b80d8
- split WidenVecRes_Binary into WidenVecRes_Binary and WidenVecRes_BinaryCanTrap
- WidenVecRes_BinaryCanTrap preserves the original behaviour for operations
that can trap
- WidenVecRes_Binary simply widens the operation and improves codegen for
3-element vectors by allowing widening and promotion on x86 (matches the
behaviour of unary and ternary operation widening)
- use WidenVecRes_Binary for operations on integers.
Reviewed by: nrotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188699 91177308-0d34-0410-b5e6-96231b3b80d8
- Benjamin fixed the emission of this file in r179937, but it still lives on a
few buildbots. We should probably clean up the build dirs once in a while,
eh?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188527 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
A common idiom is to use zero and all-ones as sentinal values and to
check for both in a single conditional ("x != 0 && x != (unsigned)-1").
That generates code, for i32, like:
testl %edi, %edi
setne %al
cmpl $-1, %edi
setne %cl
andb %al, %cl
With this transform, we generate the simpler:
incl %edi
cmpl $1, %edi
seta %al
Similar improvements for other integer sizes and on other platforms. In
general, combining the two setcc instructions into one is better.
rdar://14689217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188315 91177308-0d34-0410-b5e6-96231b3b80d8
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188173 91177308-0d34-0410-b5e6-96231b3b80d8
If the tail-callee and caller give the same bits via the same signext/zeroext
attribute then a tail-call should be allowed, since the extension has already
been done by the callee.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188159 91177308-0d34-0410-b5e6-96231b3b80d8
This patch decouples the stack protector pass so that we can support stack
protector implementations that do not use the IR level generated stack protector
fail basic block.
No codesize increase is caused by this change since the MI level tail merge pass
properly merges together the fail condition blocks (see the updated test).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188105 91177308-0d34-0410-b5e6-96231b3b80d8
For most libm ISD nodes, TargetLoweringBase::initActions sets the default
scalar-type action to Expand, and leaves the vector-type action default as
Legal. This is not appropriate for the new ISD::FROUND node (which no backend
but PowerPC handles explicitly).
Fixes PR16842.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188048 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Stop emitting weak symbols into the "coal" sections.
The Mach-O linker has been able to support the weak-def bit on any symbol for
quite a while now. The compiler however continued to place these symbols into a
"coal" section, which required the linker to map them back to the base section
name.
Replace the sections like this:
__TEXT/__textcoal_nt instead use __TEXT/__text
__TEXT/__const_coal instead use __TEXT/__const
__DATA/__datacoal_nt instead use __DATA/__data
<rdar://problem/14265330>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187939 91177308-0d34-0410-b5e6-96231b3b80d8
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187812 91177308-0d34-0410-b5e6-96231b3b80d8
This change came about primarily because of two issues in the existing code.
Niether of:
define i64 @test1(i64 %val) {
%in = trunc i64 %val to i32
tail call i32 @ret32(i32 returned %in)
ret i64 %val
}
define i64 @test2(i64 %val) {
tail call i32 @ret32(i32 returned undef)
ret i32 42
}
should be tail calls, and the function sameNoopInput is responsible. The main
problem is that it is completely symmetric in the "tail call" and "ret" value,
but in reality different things are allowed on each side.
For these cases:
1. Any truncation should lead to a larger value being generated by "tail call"
than needed by "ret".
2. Undef should only be allowed as a source for ret, not as a result of the
call.
Along the way I noticed that a mismatch between what this function treats as a
valid truncation and what the backends see can lead to invalid calls as well
(see x86-32 test case).
This patch refactors the code so that instead of being based primarily on
values which it recurses into when necessary, it starts by inspecting the type
and considers each fundamental slot that the backend will see in turn. For
example, given a pathological function that returned {{}, {{}, i32, {}}, i32}
we would consider each "real" i32 in turn, and ask if it passes through
unchanged. This is much closer to what the backend sees as a result of
ComputeValueVTs.
Aside from the bug fixes, this eliminates the recursion that's going on and, I
believe, makes the bulk of the code significantly easier to understand. The
trade-off is the nasty iterators needed to find the real types inside a
returned value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187787 91177308-0d34-0410-b5e6-96231b3b80d8
Due to the weird and wondeful usual arithmetic conversions, some
calculations involving negative values were getting performed in
uint32_t and then promoted to int64_t, which is really not a good
idea.
Patch by Katsuhiro Ueno.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187703 91177308-0d34-0410-b5e6-96231b3b80d8
