Replace getLocation() with getFrameIndexOffset() which returns the delta from frame pointer to stack slot. Dwarf writer can then use the information for whatever it wants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46597 91177308-0d34-0410-b5e6-96231b3b80d8
in the backend. Introduce a new SDNode type, MemOperandSDNode, for
holding a MemOperand in the SelectionDAG IR, and add a MemOperand
list to MachineInstr, and code to manage them. Remove the offset
field from SrcValueSDNode; uses of SrcValueSDNode that were using
it are all all using MemOperandSDNode now.
Also, begin updating some getLoad and getStore calls to use the
PseudoSourceValue objects.
Most of this was written by Florian Brander, some
reorganization and updating to TOT by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46585 91177308-0d34-0410-b5e6-96231b3b80d8
Note this solution might be somewhat fragile since ISD::LABEL may be used for other
purposes. If that ends up to be an issue, we may need to introduce a different node
for debug labels.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46571 91177308-0d34-0410-b5e6-96231b3b80d8
memory reference information in the backend. Most of this was written by
Florian Brander, cleanup and updating to TOT by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46556 91177308-0d34-0410-b5e6-96231b3b80d8
and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46538 91177308-0d34-0410-b5e6-96231b3b80d8
type that matters but the operand type. This fixes
2008-01-08-IllegalCMP.ll which crashed with the new
legalize infrastructure because SETCC with result
type i8 and operand type i64 was being custom expanded
by the X86 backend. With this fix, the gcc build gets
as far as the first libcall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46525 91177308-0d34-0410-b5e6-96231b3b80d8
registers if used by a bitconvert or using a bitconvert. This allows us to
avoid constant pool loads and use cheaper integer instructions when the
values come from or end up in integer regs anyway. For example, we now
compile CodeGen/X86/fp-in-intregs.ll to:
_test1:
movl $2147483648, %eax
xorl 4(%esp), %eax
ret
_test2:
movl $1065353216, %eax
orl 4(%esp), %eax
andl $3212836864, %eax
ret
Instead of:
_test1:
movss 4(%esp), %xmm0
xorps LCPI2_0, %xmm0
movd %xmm0, %eax
ret
_test2:
movss 4(%esp), %xmm0
andps LCPI3_0, %xmm0
movss LCPI3_1, %xmm1
andps LCPI3_2, %xmm1
orps %xmm0, %xmm1
movd %xmm1, %eax
ret
bitconverts can happen due to various calling conventions that require
fp values to passed in integer regs in some cases, e.g. when returning
a complex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46414 91177308-0d34-0410-b5e6-96231b3b80d8
delete a node even if it was not dead in some cases. Instead, just add it to
the worklist. Also, make sure to use the CombineTo methods, as it was doing
things that were unsafe: the top level combine loop could touch dangling memory.
This fixes CodeGen/Generic/2008-01-25-dag-combine-mul.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46384 91177308-0d34-0410-b5e6-96231b3b80d8
we can infer it. This will eventually help stuff, though it doesn't
do much right now because all fixed FI's have an alignment of 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46349 91177308-0d34-0410-b5e6-96231b3b80d8
1. we already know the value is dead, so don't bother replacing
it with undef.
2. The very case the comment describes actually makes the load
live which asserts in deletenode. If we do the replacement
and the node becomes live, just treat it as new. This fixes
a failure on X86/2008-01-16-InvalidDAGCombineXform.ll with
some local changes in my tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46306 91177308-0d34-0410-b5e6-96231b3b80d8
dead stuff around. This gets fed into the isel pass and causes certain foldings from
happening because nodes have extraneous uses floating around. For example, if we turned
foo(bar(x)) -> baz(x), we sometimes left bar(x) around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46305 91177308-0d34-0410-b5e6-96231b3b80d8
precision integers. This won't actually work
(and most of the code is dead) unless the new
legalization machinery is turned on. While
there, I rationalized the handling of i1, and
removed some bogus (and unused) sextload patterns.
For i1, this could result in microscopically
better code for some architectures (not X86).
It might also result in worse code if annotating
with AssertZExt nodes turns out to be more harmful
than helpful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46280 91177308-0d34-0410-b5e6-96231b3b80d8
NDEBUG. This is in response to a really nasty bug I introduced that
Dale tracked down, hopefully this won't happen in the future.
Many thanks Dale.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46254 91177308-0d34-0410-b5e6-96231b3b80d8
integers. Handle truncstore of a legal type to an unusual
number of bits. Most of this code is not reachable unless
the new legalize infrastructure is turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46249 91177308-0d34-0410-b5e6-96231b3b80d8
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46140 91177308-0d34-0410-b5e6-96231b3b80d8
and switch various codegen pieces and the X86 backend over
to using it.
* Add some comments to SelectionDAGNodes.h
* Introduce a second argument to FP_ROUND, which indicates
whether the FP_ROUND changes the value of its input. If
not it is safe to xform things like fp_extend(fp_round(x)) -> x.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46125 91177308-0d34-0410-b5e6-96231b3b80d8
and the spill is its kill. However, if the local allocator has determined the
register has not been modified (possible when its value was reloaded), it would
not issue a restore. In that case, mark the last use of the virtual register as
kill.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46111 91177308-0d34-0410-b5e6-96231b3b80d8
It's not safe to use the two value CombineTo variant to combine away a dead load.
e.g.
v1, chain2 = load chain1, loc
v2, chain3 = load chain2, loc
v3 = add v2, c
Now we replace use of v1 with undef, use of chain2 with chain1.
ReplaceAllUsesWith() will iterate through uses of the first load and update operands:
v1, chain2 = load chain1, loc
v2, chain3 = load chain1, loc
v3 = add v2, c
Now the second load is the same as the first load, SelectionDAG cse will ensure
the use of second load is replaced with the first load.
v1, chain2 = load chain1, loc
v3 = add v1, c
Then v1 is replaced with undef and bad things happen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46099 91177308-0d34-0410-b5e6-96231b3b80d8
into the ANY_EXTEND/ZERO_EXTEND/SIGN_EXTEND code to simplify it.
Unmerge the code for FP_ROUND and FP_EXTEND from each other to
make each one simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46061 91177308-0d34-0410-b5e6-96231b3b80d8
ShortenEHDataFor64Bits as a not-very-accurate
abstraction to cover all the changes in DwarfWriter.
Some cosmetic changes to Darwin assembly code for
gcc testsuite compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46029 91177308-0d34-0410-b5e6-96231b3b80d8
has no stores between the load and the end of block. This works
great and sinks hundreds of stores, but we can't turn it on because
machineinstrs don't have volatility information and we don't want to
sink volatile stores :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45894 91177308-0d34-0410-b5e6-96231b3b80d8
both work right according to the new flags.
This removes the TII::isReallySideEffectFree predicate, and adds
TII::isInvariantLoad.
It removes NeverHasSideEffects+MayHaveSideEffects and adds
UnmodeledSideEffects as machine instr flags. Now the clients
can decide everything they need.
I think isRematerializable can be implemented in terms of the
flags we have now, though I will let others tackle that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45843 91177308-0d34-0410-b5e6-96231b3b80d8
Likewise fix up a bunch of other libcalls. While
there I remove NEG_F32 and NEG_F64 since they are
not used anywhere. This fixes 9 Ada ACATS failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45833 91177308-0d34-0410-b5e6-96231b3b80d8
all clients over to using predicates instead of these flags directly.
These are now private values which are only to be used to statically
initialize the tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45692 91177308-0d34-0410-b5e6-96231b3b80d8
flags that can be set. Add predicates for the ones lacking it, and switch
some clients over to using the predicates instead of Flags directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45690 91177308-0d34-0410-b5e6-96231b3b80d8
over to using them, instead of diddling Flags directly. Change the
various flags from const variables to enums.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45677 91177308-0d34-0410-b5e6-96231b3b80d8
providing a misleading facility. It's used once in the MIPS backend
and hardcoded as "\t.globl\t" everywhere else.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45676 91177308-0d34-0410-b5e6-96231b3b80d8
that it is cheap and efficient to get.
Move a variety of predicates from TargetInstrInfo into
TargetInstrDescriptor, which makes it much easier to query a predicate
when you don't have TII around. Now you can use MI->getDesc()->isBranch()
instead of going through TII, and this is much more efficient anyway. Not
all of the predicates have been moved over yet.
Update old code that used MI->getInstrDescriptor()->Flags to use the
new predicates in many places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45674 91177308-0d34-0410-b5e6-96231b3b80d8
up to the various compiler pipelines.
This doesn't actually add support for any GC algorithms, which means it
temporarily breaks a few tests. To be fixed shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45669 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. Also, use "splice" to move the new instruction instead of
remove/insert (where it was leaking memory anyway).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45492 91177308-0d34-0410-b5e6-96231b3b80d8
it now returns the machineinstr of the use. To get the operand, use I.getOperand().
Add a new MachineRegisterInfo::replaceRegWith, which is basically like
Value::replaceAllUsesWith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45482 91177308-0d34-0410-b5e6-96231b3b80d8
operands. The lists are currently kept in MachineRegisterInfo, but it does
not yet provide an iterator interface to them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45477 91177308-0d34-0410-b5e6-96231b3b80d8
a header file from libcodegen. This violates a layering order: codegen
depends on target, not the other way around. The fix to this is to
split TII into two classes, TII and TargetInstrInfoImpl, which defines
stuff that depends on libcodegen. It is defined in libcodegen, where
the base is not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45475 91177308-0d34-0410-b5e6-96231b3b80d8
values, which means doing extra legalization work.
It would be easier to get this kind of thing right if
there was some documentation...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45472 91177308-0d34-0410-b5e6-96231b3b80d8
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45467 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. MO.isMBB() instead of MO.isMachineBasicBlock(). I don't plan on
switching everything over, so new clients should just start using the
shorter names.
Remove old long accessors, switching everything over to use the short
accessor: getMachineBasicBlock() -> getMBB(),
getConstantPoolIndex() -> getIndex(), setMachineBasicBlock -> setMBB(), etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45464 91177308-0d34-0410-b5e6-96231b3b80d8
- Eliminate the static "print" method for operands, moving it
into MachineOperand::print.
- Change various set* methods for register flags to take a bool
for the value to set it to. Remove unset* methods.
- Group methods more logically by operand flavor in MachineOperand.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45461 91177308-0d34-0410-b5e6-96231b3b80d8
