type as the vector element type: allow them to be of
a wider integer type than the element type all the way
through the system, and not just as far as LegalizeDAG.
This should be safe because it used to be this way
(the old type legalizer would produce such nodes), so
backends should be able to handle it. In fact only
targets which have legal vector types with an illegal
promoted element type will ever see this (eg: <4 x i16>
on ppc). This fixes a regression with the new type
legalizer (vec_splat.ll). Also, treat SCALAR_TO_VECTOR
the same as BUILD_VECTOR. After all, it is just a
special case of BUILD_VECTOR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69467 91177308-0d34-0410-b5e6-96231b3b80d8
promoted to legal types without changing the type of the vector. This is
following a suggestion from Duncan
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2009-February/019923.html).
The transformation that used to be done during type legalization is now
postponed to DAG legalization. This allows the BUILD_VECTORs to be optimized
and potentially handled specially by target-specific code.
It turns out that this is also consistent with an optimization done by the
DAG combiner: a BUILD_VECTOR and INSERT_VECTOR_ELT may be combined by
replacing one of the BUILD_VECTOR operands with the newly inserted element;
but INSERT_VECTOR_ELT allows its scalar operand to be larger than the
element type, with any extra high bits being implicitly truncated. The
result is a BUILD_VECTOR where one of the operands has a type larger the
the vector element type.
Any code that operates on BUILD_VECTORs may now need to be aware of the
potential type discrepancy between the vector element type and the
BUILD_VECTOR operands. This patch updates all of the places that I could
find to handle that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68996 91177308-0d34-0410-b5e6-96231b3b80d8
and expanding a bit convert (PR3711). In both cases, we extract the
valid part of the widen vector and then do the conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67175 91177308-0d34-0410-b5e6-96231b3b80d8
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65296 91177308-0d34-0410-b5e6-96231b3b80d8
(Note: Eventually, commits like this will be handled via a pre-commit hook that
does this automagically, as well as expand tabs to spaces and look for 80-col
violations.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64827 91177308-0d34-0410-b5e6-96231b3b80d8
Many targets build placeholder nodes for special operands, e.g.
GlobalBaseReg on X86 and PPC for the PIC base. There's no
sensible way to associate debug info with these. I've left
them built with getNode calls with explicit DebugLoc::getUnknownLoc operands.
I'm not too happy about this but don't see a good improvement;
I considered adding a getPseudoOperand or something, but it
seems to me that'll just make it harder to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63992 91177308-0d34-0410-b5e6-96231b3b80d8
getCALLSEQ_{END,START} to permit passing no DebugLoc
there. UNDEF doesn't logically have DebugLoc; add
getUNDEF to encapsulate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63978 91177308-0d34-0410-b5e6-96231b3b80d8
returned by getShiftAmountTy may be too small
to hold shift values (it is an i8 on x86-32).
Before and during type legalization, use a large
but legal type for shift amounts: getPointerTy;
afterwards use getShiftAmountTy, fixing up any
shift amounts with a big type during operation
legalization. Thanks to Dan for writing the
original patch (which I shamelessly pillaged).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63482 91177308-0d34-0410-b5e6-96231b3b80d8
new isOperationLegalOrCustom, which does what isOperationLegal
previously did.
Update a bunch of callers to use isOperationLegalOrCustom
instead of isOperationLegal. In some case it wasn't obvious
which behavior is desired; when in doubt I changed then to
isOperationLegalOrCustom as that preserves their previous
behavior.
This is for the second half of PR3376.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63212 91177308-0d34-0410-b5e6-96231b3b80d8
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61542 91177308-0d34-0410-b5e6-96231b3b80d8
This removes all the _8, _16, _32, and _64 opcodes and replaces each
group with an unsuffixed opcode. The MemoryVT field of the AtomicSDNode
is now used to carry the size information. In tablegen, the size-specific
opcodes are replaced by size-independent opcodes that utilize the
ability to compose them with predicates.
This shrinks the per-opcode tables and makes the code that handles
atomics much more concise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61389 91177308-0d34-0410-b5e6-96231b3b80d8
DAGTypeLegalizer::ExpandShiftWithKnownAmountBit.
In terms of restoring the optimization, the best fix here isn't
obvious... any ideas?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61119 91177308-0d34-0410-b5e6-96231b3b80d8
and insert vector element. Modified extract vector element to extend the
result to match the expected promoted type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61029 91177308-0d34-0410-b5e6-96231b3b80d8
for promoted integer types, eg: i16 on ppc-32, or
i24 on any platform. Complete support for arbitrary
precision integers would require handling expanded
integer types, eg: i128, but I couldn't be bothered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60834 91177308-0d34-0410-b5e6-96231b3b80d8
target-independent way of determining overflow on multiplication. It's very
tricky. Patch by Zoltan Varga!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60800 91177308-0d34-0410-b5e6-96231b3b80d8
essential problem was that the DAG can contain
random unused nodes which were never analyzed.
When remapping a value of a node being processed,
such a node may become used and need to be analyzed;
however due to operands being transformed during
analysis the node may morph into a different one.
Users of the morphing node need to be updated, and
this wasn't happening. While there I added a bunch
of documentation and sanity checks, so I (or some
other poor soul) won't have to scratch their head
over this stuff so long trying to remember how it
was all supposed to work next time some obscure
problem pops up! The extra sanity checking exposed
a few places where invariants weren't being preserved,
so those are fixed too. Since some of the sanity
checking is expensive, I added a flag to turn it
on. It is also turned on when building with
ENABLE_EXPENSIVE_CHECKS=1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60797 91177308-0d34-0410-b5e6-96231b3b80d8
ReplaceNodeResults: rather than returning a node which
must have the same number of results as the original
node (which means mucking around with MERGE_VALUES,
and which is also easy to get wrong since SelectionDAG
folding may mean you don't get the node you expect),
return the results in a vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60348 91177308-0d34-0410-b5e6-96231b3b80d8
"It simplifies the type legalization part a bit, and produces better code by
teaching SelectionDAG about the extra bits in an i8 SADDO/UADDO node. In
essence, I spontaneously decided that on x86 this i8 boolean result would be
either 0 or 1, and on other platforms 0/1 or 0/-1, depending on whether the
platform likes it's boolean zero extended or sign extended."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59864 91177308-0d34-0410-b5e6-96231b3b80d8
and FP_ROUND. Not sure what these were doing
here - probably they were sometimes (wrongly)
created with integer operands somewhere that
has since been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59548 91177308-0d34-0410-b5e6-96231b3b80d8
support targets that support these conversions. Users should avoid using
this node as the current targets don't generating code for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59001 91177308-0d34-0410-b5e6-96231b3b80d8
inform the optimizers that the result must be zero/
sign extended from the smaller type. For example,
if a fp to unsigned i16 is promoted to fp to i32,
then we are allowed to assume that the extra 16 bits
are zero (because the result of fp to i16 is undefined
if the result does not fit in an i16). This is
quite aggressive, but should help the optimizers
produce better code. This requires correcting a
test which thought that fp_to_uint is some kind
of truncation, which it is not: in the testcase
(which does fp to i1), either the fp value converts
to 0 or 1 or the result is undefined, which is
quite different to truncation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58991 91177308-0d34-0410-b5e6-96231b3b80d8
the condition for a BRCOND, according to what is
returned by getSetCCResultContents. Since all
targets return the same thing (ZeroOrOneSetCCResult),
this should be harmless! The point is that all over
the place the result of SETCC is fed directly into
BRCOND. On machines for which getSetCCResultContents
returns ZeroOrNegativeOneSetCCResult, this is a
sign-extended boolean. So it seems dangerous to
also feed BRCOND zero-extended booleans in some
circumstances - for example, when promoting the
condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58861 91177308-0d34-0410-b5e6-96231b3b80d8
sized integers like i129, and also reduce the number
of assumptions made about how vaarg is implemented.
This still doesn't work correctly for small integers
like (eg) i1 on x86, since x86 passes each of them
(essentially an i8) in a 4 byte stack slot, so the
pointer needs to be advanced by 4 bytes not by 1 byte
as now. But this is no longer a LegalizeTypes problem
(it was also wrong in LT before): it is a bug in the
operation expansion in LegalizeDAG: now LegalizeTypes
turns an i1 vaarg into an i8 vaarg which would work
fine if only the i8 vaarg was turned into correct code
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58635 91177308-0d34-0410-b5e6-96231b3b80d8
may return i8, which can result in SELECT nodes for
which the type of the condition is i8, but there are
no patterns for select with i8 condition. Tweak the
LegalizeTypes logic to avoid this as much as possible.
This isn't a real fix because it is still perfectly
possible to end up with such select nodes - CellSPU
needs to be fixed IMHO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57968 91177308-0d34-0410-b5e6-96231b3b80d8
that is not of type MVT::i1 in SELECT and SETCC nodes.
Relax the LegalizeTypes SELECT condition promotion
sanity checks to allow other condition types than i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57966 91177308-0d34-0410-b5e6-96231b3b80d8
the condition of a SELECT node. Make sure that the
correct extension type (any-, sign- or zero-extend)
is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57836 91177308-0d34-0410-b5e6-96231b3b80d8
than the type an i1 is promoted to (eg: i8). Account
for this. Noticed by Tilmann Scheller on CellSPU; he
will hopefully take care of fixing this in LegalizeDAG
and adding a testcase!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56997 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
While this is not a wonderful organizing principle, it
does make it easy to find routines, and clear where to
insert new ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53672 91177308-0d34-0410-b5e6-96231b3b80d8
In LegalizeDAG the value is zero-extended to
the new type before byte swapping. It doesn't
matter how the extension is done since the new
bits are shifted off anyway after the swap, so
extend by any old rubbish bits. This results
in the final assembler for the testcase being
one line shorter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53604 91177308-0d34-0410-b5e6-96231b3b80d8
SINT_TO_FP libcall plus additional operations:
it might as well be a direct UINT_TO_FP libcall.
So only turn it into an SINT_TO_FP if the target
has special handling for SINT_TO_FP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53461 91177308-0d34-0410-b5e6-96231b3b80d8
Lack of these caused a bootstrap failure with Fortran
on x86-64 with LegalizeTypes turned on. While there,
be nice to 16 bit machines and support expansion of
i32 too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53408 91177308-0d34-0410-b5e6-96231b3b80d8
soft float: experiments show that targets aren't
expecting this for results or for operands. Add
support select/select_cc result soft float and
correct operand soft float for these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53245 91177308-0d34-0410-b5e6-96231b3b80d8
hook for each way in which a result type can be
legalized (promotion, expansion, softening etc),
just use one: ReplaceNodeResults, which returns
a node with exactly the same result types as the
node passed to it, but presumably with a bunch of
custom code behind the scenes. No change if the
new LegalizeTypes infrastructure is not turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53137 91177308-0d34-0410-b5e6-96231b3b80d8
integer of the same type. Before it was "promotion",
but this is confusing because it is quite different
to promotion of integers. Call it "softening" instead,
inspired by "soft float".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52546 91177308-0d34-0410-b5e6-96231b3b80d8
rather than bundling them together. Rename FloatToInt
to PromoteFloat (better, if not perfect). Reorganize
files by types rather than by operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52408 91177308-0d34-0410-b5e6-96231b3b80d8