over each node in the worklist prior to combining.
This allows the combiner to produce new nodes which need to go back
through legalization. This is particularly useful when generating
operands to target specific nodes in a post-legalize DAG combine where
the operands are significantly easier to express as pre-legalized
operations. My immediate use case will be PSHUFB formation where we need
to build a constant shuffle mask with a build_vector node.
This also refactors the relevant functionality in the legalizer to
support this, and updates relevant tests. I've spoken to the R600 folks
and these changes look like improvements to them. The avx512 change
needs to be investigated, I suspect there is a disagreement between the
legalizer and the DAG combiner there, but it seems a minor issue so
leaving it to be re-evaluated after this patch.
Differential Revision: http://reviews.llvm.org/D4564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214020 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first commit in a series that add an @llvm.assume intrinsic which
can be used to provide the optimizer with a condition it may assume to be true
(when the control flow would hit the intrinsic call). Some basic properties are added here:
- llvm.invariant(true) is dead.
- llvm.invariant(false) is unreachable (this directly corresponds to the
documented behavior of MSVC's __assume(0)), so is llvm.invariant(undef).
The intrinsic is tagged as writing arbitrarily, in order to maintain control
dependencies. BasicAA has been updated, however, to return NoModRef for any
particular location-based query so that we don't unnecessarily block code
motion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213973 91177308-0d34-0410-b5e6-96231b3b80d8
address of the stack guard was being spilled to the stack.
Previously the address of the stack guard would get spilled to the stack if it
was impossible to keep it in a register. This patch introduces a new target
independent node and pseudo instruction which gets expanded post-RA to a
sequence of instructions that load the stack guard value. Register allocator
can now just remat the value when it can't keep it in a register.
<rdar://problem/12475629>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213967 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't actually correspond to an SDValue at all. Fixes most of the
remaining asserts on out-of-range SDValue result numbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213930 91177308-0d34-0410-b5e6-96231b3b80d8
with a result number outside the range of results for the node.
I don't know how we managed to not really check this very basic
invariant for so long, but the code is *very* broken at this point.
I have over 270 test failures with the assert enabled. I'm committing it
disabled so that others can join in the cleanup effort and reproduce the
issues. I've also included one of the obvious fixes that I already
found. More fixes to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213926 91177308-0d34-0410-b5e6-96231b3b80d8
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.
This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.
This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).
I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.
With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).
Differential Revision: http://reviews.llvm.org/D4638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213898 91177308-0d34-0410-b5e6-96231b3b80d8
vector operation legalization with support for custom target lowering
and fallback to expand when it fails, and use this to implement sext and
anyext load lowering for x86 in a more principled way.
Previously, the x86 backend relied on a target DAG combine to "combine
away" sextload and extload nodes prior to legalization, or would expand
them during legalization with terrible code. This is particularly
problematic because the DAG combine relies on running over non-canonical
DAG nodes at just the right time to match several common and important
patterns. It used a combine rather than lowering because we didn't have
good lowering support, and to expose some tricks being employed to more
combine phases.
With this change it becomes a proper lowering operation, the backend
marks that it can lower these nodes, and I've added support for handling
the canonical forms that don't have direct legal representations such as
sextload of a v4i8 -> v4i64 on AVX1. With this change, our test cases
for this behavior continue to pass even after the DAG combiner beigns
running more systematically over every node.
There is some noise caused by this in the test suite where we actually
use vector extends instead of subregister extraction. This doesn't
really seem like the right thing to do, but is unlikely to be a critical
regression. We do regress in one case where by lowering to the
target-specific patterns early we were able to combine away extraneous
legal math nodes. However, this regression is completely addressed by
switching to a widening based legalization which is what I'm working
toward anyways, so I've just switched the test to that mode.
Differential Revision: http://reviews.llvm.org/D4654
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213897 91177308-0d34-0410-b5e6-96231b3b80d8
In order to enable the preservation of noalias function parameter information
after inlining, and the representation of block-level __restrict__ pointer
information (etc.), additional kinds of aliasing metadata will be introduced.
This metadata needs to be carried around in AliasAnalysis::Location objects
(and MMOs at the SDAG level), and so we need to generalize the current scheme
(which is hard-coded to just one TBAA MDNode*).
This commit introduces only the necessary refactoring to allow for the
introduction of other aliasing metadata types, but does not actually introduce
any (that will come in a follow-up commit). What it does introduce is a new
AAMDNodes structure to hold all of the aliasing metadata nodes associated with
a particular memory-accessing instruction, and uses that structure instead of
the raw MDNode* in AliasAnalysis::Location, etc.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213859 91177308-0d34-0410-b5e6-96231b3b80d8
Constant fold the lanes of the input constant build_vector individually
so we correctly handle when the vector elements are not all the same
constant value.
PR20394
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213798 91177308-0d34-0410-b5e6-96231b3b80d8
The target-independent DAGcombiner will generate:
asr w1, X, #31 w1 = splat sign bit.
add X, X, w1, lsr #28 X = X + 0 or pow2-1
asr w0, X, asr #4 w0 = X/pow2
However, the add + shifts is expensive, so generate:
add w0, X, 15 w0 = X + pow2-1
cmp X, wzr X - 0
csel X, w0, X, lt X = (X < 0) ? X + pow2-1 : X;
asr w0, X, asr 4 w0 = X/pow2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213758 91177308-0d34-0410-b5e6-96231b3b80d8
insertions.
The old behavior could cause arbitrarily bad memory usage in the DAG
combiner if there was heavy traffic of adding nodes already on the
worklist to it. This commit switches the DAG combine worklist to work
the same way as the instcombine worklist where we null-out removed
entries and only add new entries to the worklist. My measurements of
codegen time shows slight improvement. The memory utilization is
unsurprisingly dominated by other factors (the IR and DAG itself
I suspect).
This change results in subtle, frustrating churn in the particular order
in which DAG combines are applied which causes a number of minor
regressions where we fail to match a pattern previously matched by
accident. AFAICT, all of these should be using AddToWorklist to directly
or should be written in a less brittle way. None of the changes seem
drastically bad, and a few of the changes seem distinctly better.
A major change required to make this work is to significantly harden the
way in which the DAG combiner handle nodes which become dead
(zero-uses). Previously, we relied on the ability to "priority-bump"
them on the combine worklist to achieve recursive deletion of these
nodes and ensure that the frontier of remaining live nodes all were
added to the worklist. Instead, I've introduced a routine to just
implement that precise logic with no indirection. It is a significantly
simpler operation than that of the combiner worklist proper. I suspect
this will also fix some other problems with the combiner.
I think the x86 changes are really minor and uninteresting, but the
avx512 change at least is hiding a "regression" (despite the test case
being just noise, not testing some performance invariant) that might be
looked into. Not sure if any of the others impact specific "important"
code paths, but they didn't look terribly interesting to me, or the
changes were really minor. The consensus in review is to fix any
regressions that show up after the fact here.
Thanks to the other reviewers for checking the output on other
architectures. There is a specific regression on ARM that Tim already
has a fix prepped to commit.
Differential Revision: http://reviews.llvm.org/D4616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213727 91177308-0d34-0410-b5e6-96231b3b80d8
DAG into a helper function.
This adds a trip through the (very minimal) verification logic in
a bunch of places that were missing it, but shouldn't have any other
impact outside of refactoring. I'm hoping to use this to do more clever
things when DAG nodes are inserted into the graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213612 91177308-0d34-0410-b5e6-96231b3b80d8
a bug in 2010 when they were added but are adding no value today.
In fact, they are utter lies. NodeAllocator is used to allocate almost
all of these node types. I don't know what we were trying to assert
here, and the docs don't give any answer. Until we once again stumble
upon a bug needing help, let's clear the path for improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213610 91177308-0d34-0410-b5e6-96231b3b80d8
We should update the usages to all of the results;
otherwise, we might get assertion failure or SEGV during
the type legalization of ATOMIC_CMP_SWAP_WITH_SUCCESS
with two or more illegal types.
For example, in the following sequence, both i8 and i1
might be illegal in some target, e.g. armv5, mipsel, mips64el,
%0 = cmpxchg i8* %ptr, i8 %desire, i8 %new monotonic monotonic
%1 = extractvalue { i8, i1 } %0, 1
Since both i8 and i1 should be legalized, the corresponding
ATOMIC_CMP_SWAP_WITH_SUCCESS dag will be checked/replaced/updated
twice.
If we don't update the usage to *ALL* of the results in the
first round, the DAG for extractvalue might be processed earlier.
The GetPromotedInteger() will result in assertion failure,
because its operand (i.e. the success bit of cmpxchg) is not
promoted beforehand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213569 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r213474 (and r213475), which causes a miscompile on
a stage2 LTO build. I'll reply on the list in a moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213562 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the first stage DAG for @llvm.convert.to.fp16 an fptrunc,
and correspondingly @llvm.convert.from.fp16 an fpext. The legalisation
path is now uniform, regardless of the input IR:
fptrunc -> FP_TO_FP16 (if f16 illegal) -> libcall
fpext -> FP16_TO_FP (if f16 illegal) -> libcall
Each target should be able to select the version that best matches its
operations and not be required to duplicate patterns for both fptrunc
and FP_TO_FP16 (for example).
As a result we can remove some redundant AArch64 patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213507 91177308-0d34-0410-b5e6-96231b3b80d8
'Worklist' consistently rather than a deeply confusing mixture of
'WorkList' and 'Worklist'.
Notably, the very 'WorkList' of the DAG combiner was exposed to target
specific DAG combines under an interface 'AddToWorklist' which was
implemented by in turn calling 'AddToWorkList' in the combiner. This has
sent me circling with the wrong case in grep one too many times.
I chose to normalize on 'Worklist' because that one won the grep-vote
for llvm/lib/... by a hundered hits or so, and it is used in places
relatively "canonical" such as InstCombine's Worklist. Let's all jsut
pick this casing, whether "correct", "good", or "bad" and be
consistent...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213506 91177308-0d34-0410-b5e6-96231b3b80d8
stack, filter all handle nodes from the DAG combiner worklist.
This will also handle cases where other handle nodes might be
(erroneously) added to the worklist and then cause bugs and explosions
when deleted. For example, when running the legalizer within the DAG
combiner, there are times when other handle nodes are used and can end
up here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213505 91177308-0d34-0410-b5e6-96231b3b80d8
Canonicalize shuffles according to rules:
* shuffle(A, shuffle(A, B)) -> shuffle(shuffle(A,B), A)
* shuffle(B, shuffle(A, B)) -> shuffle(shuffle(A,B), B)
* shuffle(B, shuffle(A, Undef)) -> shuffle(shuffle(A, Undef), B)
This patch helps identifying more shuffle pairs that could be combined reusing
the already existing rules in the DAGCombiner.
Added new test 'combine-vec-shuffle-5.ll' to verify that the canonicalized
shuffles are now folded into a single shuffle node by the DAGCombiner.
Added more test cases to 'combine-vec-shuffle-4.ll'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213504 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes function 'CommuteVectorShuffle' from X86ISelLowering.cpp
and moves its logic into SelectionDAG.cpp as method 'getCommutedVectorShuffles'.
This refactoring is in preperation of an upcoming change to the DAGCombiner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213503 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This patch introduces two new iterator ranges and updates existing code to use it. No functional change intended.
Test Plan: All tests (make check-all) still pass.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213474 91177308-0d34-0410-b5e6-96231b3b80d8
Since the result of a SETCC for AArch64 is 0 or -1 in each lane, we can
move unary operations, in this case [su]int_to_fp through the mask
operation and constant fold the operation away. Generally speaking:
UNARYOP(AND(VECTOR_CMP(x,y), constant))
--> AND(VECTOR_CMP(x,y), constant2)
where constant2 is UNARYOP(constant).
This implements the transform where UNARYOP is [su]int_to_fp.
For example, consider the simple function:
define <4 x float> @foo(<4 x float> %val, <4 x float> %test) nounwind {
%cmp = fcmp oeq <4 x float> %val, %test
%ext = zext <4 x i1> %cmp to <4 x i32>
%result = sitofp <4 x i32> %ext to <4 x float>
ret <4 x float> %result
}
Before this change, the code is generated as:
fcmeq.4s v0, v0, v1
movi.4s v1, #0x1 // Integer splat value.
and.16b v0, v0, v1 // Mask lanes based on the comparison.
scvtf.4s v0, v0 // Convert each lane to f32.
ret
After, the code is improved to:
fcmeq.4s v0, v0, v1
fmov.4s v1, #1.00000000 // f32 splat value.
and.16b v0, v0, v1 // Mask lanes based on the comparison.
ret
The svvtf.4s has been constant folded away and the floating point 1.0f
vector lanes are materialized directly via fmov.4s.
Rather than do the folding manually in the target code, teach getNode()
in the generic SelectionDAG to handle folding constant operands of
vector [su]int_to_fp nodes. It is reasonable (as noted in a FIXME) to do
additional constant folding there as well, but I don't have test cases
for those operations, so leaving them for another time when it becomes
appropriate.
rdar://17693791
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213341 91177308-0d34-0410-b5e6-96231b3b80d8
There's a bug where this can create cycles in the DAG. It will take a bit
to fix, so I'm backing it out for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213339 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we asserted on this code. Currently compiler-rt doesn't
actually implement any of these new libcalls, but external help is
pretty much the only viable option for LLVM.
I've followed the much more generic "__truncST2" naming, as opposed to
the odd name for f32 -> f16 truncation. This can obviously be changed
later, or overridden by any targets that need to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213252 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the two intrinsics @llvm.convert.from.f16 and
@llvm.convert.to.f16 accept types other than simple "float". This is
only strictly needed for the truncate operation, since otherwise
double rounding occurs and there's no way to represent the strict IEEE
conversion. However, for symmetry we allow larger types in the extend
too.
During legalization, we can expand an "fp16_to_double" operation into
two extends for convenience, but abort when the truncate isn't legal. A new
libcall is probably needed here.
Even after this commit, various target tweaks are needed to actually use the
extended intrinsics. I've put these into separate commits for clarity, so there
are no actual tests of f64 conversion here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213248 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue where a local value is defined before and used after an
inline asm call with side effects.
This fix simply flushes the local value map, which updates the insertion point
for the inline asm call to be above any previously defined local values.
This fixes <rdar://problem/17694203>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213203 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that in most cases (the main exception being i1-related
types) once these operations are formed we cannot separate them and
the targets end up having to deal with them whether they want to or
not.
This is not a good situation, and a more reasonable default can be
formed by ackowledging this and having targets leave them as Legal.
Only x86 seems to be affected (other targets don't even try marking
the operation Expand).
Mostly there's no visible change here yet, but it will be useful to
have truly expanded EXTLOADS for MVT::f16 softening support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213162 91177308-0d34-0410-b5e6-96231b3b80d8
There is no need to pass on TLI separately to the function. As Eric pointed out
the Target Machine already provides everything we need.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213108 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds two new rules to the DAGCombiner:
1. shuffle (shuffle A, Undef, M0), B, M1 -> shuffle A, B, M2
2. shuffle (shuffle A, Undef, M0), A, M1 -> shuffle A, Undef, M2
We only do this if the combined shuffle is legal for the target.
Example:
;;
define <4 x float> @test(<4 x float> %a, <4 x float> %b) {
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32><i32 6, i32 0, i32 1, i32 7>
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32><i32 1, i32 2, i32 4, i32 5>
ret <4 x i32> %2
}
;;
(using llc -mcpu=corei7 -march=x86-64)
Before, the x86 backend generated:
pshufd $120, %xmm0, %xmm0
shufps $-108, %xmm0, %xmm1
movaps %xmm1, %xmm0
Now the x86 backend generates:
movsd %xmm1, %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213069 91177308-0d34-0410-b5e6-96231b3b80d8
The patchpoint instruction should have been inserted before the target
generated call instruction to be inside the ADJSTACKDOWN/ADJSTACKUP call
sequence window.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213034 91177308-0d34-0410-b5e6-96231b3b80d8
Always update the value map with the result register (if there is one), for the
patchpoint instruction we created to replace the target-specific call
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213033 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a crasher in method 'DAGCombiner::visitOR' due to an invalid
call to method 'isShuffleMaskLegal'. On x86, method 'isShuffleMaskLegal'
always expects a legal vector value type in input.
With this patch, we immediately check if the input OR dag node has a legal
vector type; we only try to fold a OR dag node into a single shufflevector
if we know that the resulting shuffle will have a legal type.
This is to avoid calling method 'isShuffleMaskLegal' on a potentially
illegal vector value type.
Added a new test-case to file 'CodeGen/X86/combine-or.ll' to verify that
DAGCombiner doesn't crash in the attempt to check/combine an OR between shuffles
with illegal types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213020 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the DAGCombiner how to fold a pair of shuffles
according to rules:
1. shuffle(shuffle A, B, M0), B, M1) -> shuffle(A, B, M2)
2. shuffle(shuffle A, B, M0), A, M1) -> shuffle(A, B, M3)
The new rules would only trigger if the resulting shuffle has legal type and
legal mask.
Added test 'combine-vec-shuffle-3.ll' to verify that DAGCombiner correctly
folds shuffles on x86 when the resulting mask is legal. Also added some negative
cases to verify that we avoid introducing illegal shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213001 91177308-0d34-0410-b5e6-96231b3b80d8
Verify that DAGCombiner does not crash when trying to fold a pair of shuffles
according to rule (added at r212539):
(shuffle (shuffle A, Undef, M0), Undef, M1) -> (shuffle A, Undef, M2)
The DAGCombiner avoids folding shuffles if the resulting shuffle dag node
is not legal for the target. That means, the resulting shuffle must have
legal type and legal mask.
Before, the DAGCombiner only called method
'TargetLowering::isShuffleMaskLegal' to check if it was "safe" to fold according
to the above-mentioned rule. However, this caused a crash in the x86 backend
since method 'isShuffleMaskLegal' always expects to be called on a
legal vector type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212915 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the target-independent lowering for the patchpoint
intrinsic. Targets have to implement the FastLowerCall
hook to support this intrinsic.
Related to <rdar://problem/17427052>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212849 91177308-0d34-0410-b5e6-96231b3b80d8
The infrastructure mimics the call lowering we have already in place for
SelectionDAG, but with limitations. For example structure return demotion and
non-simple types are not supported (yet).
Currently every backend has its own implementation and duplicated code for call
lowering. There is also no specified interface that could be called from
target-independent code. The target-hook is opt-in and doesn't affect current
implementations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212848 91177308-0d34-0410-b5e6-96231b3b80d8
Break out the arguemnts required from SelectionDAG, so that this function can
also be used by FastISel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212844 91177308-0d34-0410-b5e6-96231b3b80d8
Create a separate helper function for target-independent intrinsic lowering. Also
add an target-hook that allows to directly call into a target-sepcific intrinsic
lowering method. Currently the implementation is opt-in and doesn't affect
existing target implementations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212843 91177308-0d34-0410-b5e6-96231b3b80d8
ACLE 2.0 allows __fp16 to be used as a function argument or return
type. This enables this for AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212812 91177308-0d34-0410-b5e6-96231b3b80d8
Move the code to a helper function to allow calls from TypeLegalizer.
No functionality change intended
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <tom@stellard.net>
Reviewed-by: Owen Anderson <resistor@mac.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212772 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the DAGCombiner how to fold shuffles according to the
following new rules:
1. shuffle(shuffle(x, y), undef) -> x
2. shuffle(shuffle(x, y), undef) -> y
3. shuffle(shuffle(x, y), undef) -> shuffle(x, undef)
4. shuffle(shuffle(x, y), undef) -> shuffle(y, undef)
The backend avoids to combine shuffles according to rules 3. and 4. if
the resulting shuffle does not have a legal mask. This is to avoid introducing
illegal shuffles that are potentially expanded into a sub-optimal sequence of
target specific dag nodes during vector legalization.
Added test case combine-vec-shuffle-2.ll to verify that we correctly triggers
the new rules when combining shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212748 91177308-0d34-0410-b5e6-96231b3b80d8
to the zero-extend-vector-inreg node introduced previously for the same
purpose: manage the type legalization of widened extend operations,
especially to support the experimental widening mode for x86.
I'm adding both because sign-extend is expanded in terms of any-extend
with shifts to propagate the sign bit. This removes the last
fundamental scalarization from vec_cast2.ll (a test case that hit many
really bad edge cases for widening legalization), although the trunc
tests in that file still appear scalarized because the the shuffle
legalization is scalarizing. Funny thing, I've been working on that.
Some initial experiments with this and SSE2 scenarios is showing
moderately good behavior already for sign extension. Still some work to
do on the shuffle combining on X86 before we're generating optimal
sequences, but avoiding scalarization is a huge step forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212714 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer
comparisons return 0 or 1.
Updated the various uses of getBooleanContents. Two simplifications had to be
disabled when float and int boolean contents differ:
- ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially
discoverable (i.e. when the condition of the VSELECT is a SETCC node).
- visitVSELECT (select C, 0, 1) -> (xor C, 1).
Come to think of it, this one could test for the common case of 'C'
being a SETCC too.
Preserved existing behaviour for all other targets and updated the affected
MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low'
variable was counting in the wrong direction because it thought it could simply
add the result of the comparison.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212697 91177308-0d34-0410-b5e6-96231b3b80d8
not widening the input type to the node sufficiently to let the ext take
place in a register.
This would in turn result in a mysterious bitcast assertion failure
downstream. First change here is to add back the helpful assert I had in
an earlier version of the code to catch this immediately.
Next change is to add support to the type legalization to detect when we
have widened the operand either too little or too much (for whatever
reason) and find a size-matched legal vector type to convert it to
first. This can also fail so we get a new fallback path, but that seems
OK.
With this, we no longer crash on vec_cast2.ll when using widening. I've
also added the CHECK lines for the zero-extend cases here. We still need
to support sign-extend and trunc (or something) to get plausible code
for the other two thirds of this test which is one of the regression
tests that showed the most scalarization when widening was
force-enabled. Slowly closing in on widening being a viable legalization
strategy without it resorting to scalarization at every turn. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212614 91177308-0d34-0410-b5e6-96231b3b80d8
vector types to be legal and a ZERO_EXTEND node is encountered.
When we use widening to legalize vector types, extend nodes are a real
challenge. Either the input or output is likely to be legal, but in many
cases not both. As a consequence, we don't really have any way to
represent this situation and the prior code in the widening legalization
framework would just scalarize the extend operation completely.
This patch introduces a new DAG node to represent doing a zero extend of
a vector "in register". The core of the idea is to allow legal but
different vector types in the input and output. The output vector must
have fewer lanes but wider elements. The operation is defined to zero
extend the low elements of the input to the size of the output elements,
and drop all of the high elements which don't have a corresponding lane
in the output vector.
It also includes generic expansion of this node in terms of blending
a zero vector into the high elements of the vector and bitcasting
across. This in turn yields extremely nice code for x86 SSE2 when we use
the new widening legalization logic in conjunction with the new shuffle
lowering logic.
There is still more to do here. We need to support sign extension, any
extension, and potentially int-to-float conversions. My current plan is
to continue using similar synthetic nodes to model each of these
transitions with generic lowering code for each one.
However, with this patch LLVM already reaches performance parity with
GCC for the core C loops of the x264 code (assuming you disable the
hand-written assembly versions) when compiling for SSE2 and SSE3
architectures and enabling the new widening and lowering logic for
vectors.
Differential Revision: http://reviews.llvm.org/D4405
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212610 91177308-0d34-0410-b5e6-96231b3b80d8
tracks which elements of the build vector are in fact undef.
This should make actually inpsecting them (likely in my next patch)
reasonably pretty. Also makes the output parameter optional as it is
clear now that *most* users are happy with undefs in their splats.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212581 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches how to fold a shuffle according to rule:
shuffle (shuffle (x, undef, M0), undef, M1) -> shuffle(x, undef, M2)
We do this only if the resulting mask M2 is legal; this is to avoid introducing
illegal shuffles that are potentially expanded into a sub-optimal sequence
of target specific dag nodes.
This patch has the advantage of being target independent, since it works on ISD
nodes. Therefore, all targets (not only x86) can take advantage of this rule.
The idea behind this patch is that most shuffle pairs can be safely combined
before we run the legalizer on vector operations. This allows us to
combine/simplify dag nodes earlier in the process and not only immediately
before instruction selection stage.
That said. This patch is not meant to replace any existing target specific
combine rules; backends might still introduce new shuffles during legalization
stage. Also, this rule is very simple and avoids to aggressively optimize
shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212539 91177308-0d34-0410-b5e6-96231b3b80d8
aggressively from the x86 shuffle lowering to the generic SDAG vector
shuffle formation code.
This code already tried to fold away shuffles of splats! It just had
lots of bugs and couldn't handle the case my new x86 shuffle lowering
needed.
First, it failed to correctly compute whether N2 was undef because it
pre-computed this, then did transformations which could *make* N2 undef,
then failed to ever re-consider the precomputed state.
Second, it didn't look through bitcasts at all, even in the safe cases
where they are just element-type bitcasts with no change to the number
of elements.
Third, it didn't handle all-zero bit casts nicely the way my code in the
x86 side of things did, which is essential to getting good zext-shuffle
lowerings.
But all of these are generic. I just ported the code down to this layer
and fixed the surrounding bugs. Tests exercising this in the x86 backend
still pass and some silly code in widen_cast-6.ll gets better. I updated
that test to be a bit more precise but it's still pretty unclear what
the value of the test is in this day and age.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212517 91177308-0d34-0410-b5e6-96231b3b80d8
around the handling of UNDEF lanes in boolean vector content analysis.
The code before my changes here also failed to check for non-constant
splats in a buildvector. I have no idea how to trigger this, I just
spotted by inspection when trying to understand the code. It seems
extremely unlikely to be worth the trouble to teach the only caller of
this code (DAG combining setcc patterns) how to cleverly handle undef
lanes, so I've just commented more thoroughly that we're giving up
there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212515 91177308-0d34-0410-b5e6-96231b3b80d8
nodes about whether they are splats. This is factored out and improved
from r212324 which got reverted as it was far too aggressive. The new
API should help more conservatively handle buildvectors that are
a mixture of splatted and undef values.
No functionality change at this point. The hope is to slowly
re-introduce the undef-tolerant optimization of splats, but each time
being forced to make a concious decision about how to handle the undefs
in a way that doesn't lead to contradicting assumptions about the
collapsed value.
Hal has pointed out in discussions that this may not end up being the
desired API and instead it may be more convenient to get a mask of the
undef elements or something similar. I'm starting simple and will expand
the API as I adapt actual callers and see exactly what they need.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212514 91177308-0d34-0410-b5e6-96231b3b80d8
lanes in vector splats.
The core problem here is that undef lanes can't *unilaterally* be
considered to contribute to splats. Their handling needs to be more
cautious. There is also a reported failure of the nightly testers
(thanks Tobias!) that may well stem from the same core issue. I'm going
to fix this theoretical issue, factor the APIs a bit better, and then
verify that I don't see anything bad with Tobias's reduction from the
test suite before recommitting.
Original commit message for r212324:
[x86] Generalize BuildVectorSDNode::getConstantSplatValue to work for
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can
easily tweak the lowering if they want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212475 91177308-0d34-0410-b5e6-96231b3b80d8
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can easily
tweak the lowering if they want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212324 91177308-0d34-0410-b5e6-96231b3b80d8
subtarget. This involved having the movt predicate take the current
function - since we care about size in instruction selection for
whether or not to use movw/movt take the function so we can check
the attributes. This required adding the current MachineFunction to
FastISel and propagating through.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212309 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC 128-bit long double data type (ppcf128 in LLVM) is in fact a
pair of two doubles, where one is considered the "high" or
more-significant part, and the other is considered the "low" or
less-significant part. When a ppcf128 value is stored in memory or a
register pair, the high part always comes first, i.e. at the lower
memory address or in the lower-numbered register, and the low part
always comes second. This is true both on big-endian and little-endian
PowerPC systems. (Similar to how with a complex number, the real part
always comes first and the imaginary part second, no matter the byte
order of the system.)
This was implemented incorrectly for little-endian systems in LLVM.
This commit fixes three related issues:
- When printing an immediate ppcf128 constant to assembler output
in emitGlobalConstantFP, emit the high part first on both big-
and little-endian systems.
- When lowering a ppcf128 type to a pair of f64 types in SelectionDAG
(which is used e.g. when generating code to load an argument into a
register pair), use correct low/high part ordering on little-endian
systems.
- In a related issue, because lowering ppcf128 into a pair of f64 must
operate differently from lowering an int128 into a pair of i64,
bitcasts between ppcf128 and int128 must not be optimized away by the
DAG combiner on little-endian systems, but must effect a word-swap.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212274 91177308-0d34-0410-b5e6-96231b3b80d8
This operation was classified as a binary operation in the widening
logic for some reason (clearly, untested). It is in fact a unary
operation. Add a RUN line to a test to exercise this for x86.
Note that again the vector widening strategy doesn't regress anything
and in one case removes a totally unecessary instruction that we
couldn't avoid when promoting the element type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212257 91177308-0d34-0410-b5e6-96231b3b80d8
switches) into a switch, and sink them into a dispatch function that can
return the result rather than awkward variable setting with breaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212166 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't add any information for methods in the VectorLegalizer
class that clearly take SDAG operations to legalize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212157 91177308-0d34-0410-b5e6-96231b3b80d8
The argument list vector is never used after it has been passed to the
CallLoweringInfo and moving it to the CallLoweringInfo is cleaner and
pretty much as cheap as keeping a pointer to it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212135 91177308-0d34-0410-b5e6-96231b3b80d8
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211749 91177308-0d34-0410-b5e6-96231b3b80d8
We handle this by spilling the whole thing to the stack and doing the
insertion as a store.
PR19492. This happens in real code because the vectorizer creates v2i128 when AVX is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211435 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With this patch, range metadata can be added to call/invoke including
IntrinsicInst. Previously, it could only be added to load.
Rename computeKnownBitsLoad to computeKnownBitsFromRangeMetadata because
range metadata is not only used by load.
Update the language reference to reflect this change.
Test Plan:
Add several tests in range-2.ll to confirm the verifier is happy with
having range metadata on call/invoke.
Add two tests in AddOverFlow.ll to confirm annotating range metadata to
call/invoke can benefit InstCombine.
Reviewers: meheff, nlewycky, reames, hfinkel, eliben
Reviewed By: eliben
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4187
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211281 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like there are two versions of LowerCallTo here: the
SelectionDAGBuilder one is designed to operate on LLVM IR, and the
TargetLowering one in the case where everything is at DAG level.
Previously, only the SelectionDAGBuilder variant could handle demoting
an impossible return to sret semantics (before delegating to the
TargetLowering version), but this functionality is also useful for
certain libcalls (e.g. 128-bit operations on 32-bit x86). So this
commit moves the sret handling down a level.
rdar://problem/17242889
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211155 91177308-0d34-0410-b5e6-96231b3b80d8
It's valid to use FP_TO_SINT when asking for a smaller type (e.g. all
"unsigned int16" values fit into a "signed int32"), but the reverse
isn't true.
Unfortunately, I'm not actually aware of any architecture with
asymmetric FP_TO_SINT and FP_TO_UINT handling and the logic happens to
work in the symmetric case, so I can't actually write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210986 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a weak variant of the cmpxchg operation, as described
in C++11. A cmpxchg instruction with this modifier is permitted to
fail to store, even if the comparison indicated it should.
As a result, cmpxchg instructions must return a flag indicating
success in addition to their original iN value loaded. Thus, for
uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The
second flag is 1 when the store succeeded.
At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been
added as the natural representation for the new cmpxchg instructions.
It is a strong cmpxchg.
By default this gets Expanded to the existing ATOMIC_CMP_SWAP during
Legalization, so existing backends should see no change in behaviour.
If they wish to deal with the enhanced node instead, they can call
setOperationAction on it. Beware: as a node with 2 results, it cannot
be selected from TableGen.
Currently, no use is made of the extra information provided in this
patch. Test updates are almost entirely adapting the input IR to the
new scheme.
Summary for out of tree users:
------------------------------
+ Legacy Bitcode files are upgraded during read.
+ Legacy assembly IR files will be invalid.
+ Front-ends must adapt to different type for "cmpxchg".
+ Backends should be unaffected by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210903 91177308-0d34-0410-b5e6-96231b3b80d8
Add branch weights to branch instructions, so that the following passes can
optimize based on it (i.e. basic block ordering).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210863 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds MachineMemOperands to load and store instructions. This allows
the peephole optimizer to fold load instructions. Unfortunatelly the peephole
optimizer currently doesn't run at -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210858 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r210540, adds a testcase for the regression it
caused, and marks the R600 test it was supposed to fix as XFAIL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210792 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210541 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds new target specific combine rules to identify horizontal
add/sub idioms from BUILD_VECTOR dag nodes.
This patch also teaches the DAGCombiner how to canonicalize sequences of
insert_vector_elt dag nodes according to the following rule:
(insert_vector_elt (insert_vector_elt A, I0), I1) ->
(insert_vecto_elt (insert_vector_elt A, I1), I0)
This new canonicalization rule only triggers if the inner insert_vector
dag node has exactly one use; also, both indices must be known constants,
and I1 < I0.
This last rule made it possible to write a simpler algorithm to identify
horizontal add/sub patterns because now we don't have to worry about the
ordering of insert_vector_elt dag nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210477 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies SelectionDAGBuilder to construct SDNodes with associated
NoSignedWrap, NoUnsignedWrap and Exact flags coming from IR BinaryOperator
instructions.
Added a new SDNode type called 'BinaryWithFlagsSDNode' to allow accessing
nsw/nuw/exact flags during codegen.
Patch by Marcello Maggioni.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210467 91177308-0d34-0410-b5e6-96231b3b80d8
DAG cycle detection is only enabled with ENABLE_EXPENSIVE_CHECKS. However we
can run it just before we would crash in order to provide more informative
diagnostics.
Now in addition to the "Overran sorted position" message we also get the Node
printed if a cycle was detected.
Tested by building several configs: Debug+Assert, Debug+Assert+Check (this is
ENABLE_EXPENSIVE_CHECKS), Release+Assert and Release. Also tried that the
AssignTopologicalOrder assert produces the expected results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209977 91177308-0d34-0410-b5e6-96231b3b80d8
Pass the DAG down to checkForCycles from all callers where we have it. This
allows target-specific nodes to be printed properly.
Also print some missing newlines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209976 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to simplify/canonicalize dag node
sequences normally introduced by the backend when promoting certain dag nodes
with illegal vector type.
This patch adds two new combine rules:
1) fold (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
(shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)
2) fold (BINOP (shuffle (A, Undef, <Mask>)), (shuffle (B, Undef, <Mask>))) ->
(shuffle (BINOP A, B), Undef, <Mask>).
Both rules are only triggered on the type-legalized DAG.
In particular, rule 1. is a target specific combine rule that attempts
to sink a bitconvert into the operands of a binary operation.
Rule 2. is a target independet rule that attempts to move a shuffle
immediately after a binary operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If both vector args to vselect are concat_vectors and the condition is
constant and picks half a vector from each argument, convert the vselect
into a concat_vectors.
Added a test.
The ConvertSelectToConcatVector is assuming it doesn't get vselects with
arguments of, for example, <undef, undef, true, true>. Those get taken
care of in the checks above its call.
Reviewers: nadav, delena, grosbach, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3916
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209929 91177308-0d34-0410-b5e6-96231b3b80d8
Unordered is strictly weaker than monotonic, so if the latter doesn't have any
barriers then the former certainly shouldn't.
rdar://problem/16548260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209901 91177308-0d34-0410-b5e6-96231b3b80d8
An address only use of an extract element of a load can be simplified to a
load. Without this the result of the extract element is spilled to the
stack so that an address is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209788 91177308-0d34-0410-b5e6-96231b3b80d8
No test because no in-tree targets change the bitwidth of the
setcc type depending on the bitwidth of the compared type.
Patch by Ke Bai
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209771 91177308-0d34-0410-b5e6-96231b3b80d8
This matches gcc's behavior. It also seems natural given that aliases
contain other properties that govern how it is accessed (linkage,
visibility, dll storage).
Clang still has to be updated to expose this feature to C.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209759 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r208640 (I've just XFAILed the test) because it broke ppc64/Linux
self-hosting. Because nearly every regression test triggers a segfault, I hope
this will be easy to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209747 91177308-0d34-0410-b5e6-96231b3b80d8
Cortex-M4 only has single-precision floating point support, so any LLVM
"double" type will have been split into 2 i32s by now. Fortunately, the
consecutive-register framework turns out to be precisely what's needed to
reconstruct the double and follow AAPCS-VFP correctly!
rdar://problem/17012966
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209650 91177308-0d34-0410-b5e6-96231b3b80d8
- On ARM/ARM64 we get a vrev because the shuffle matching code is really smart. We still unroll anything that's not v4i32 though.
- On X86 we get a pshufb with SSSE3. Required more cleverness in isShuffleMaskLegal.
- On PPC we get a vperm for v8i16 and v4i32. v2i64 is unrolled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209123 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly a mechanical change changing all the call sites to the newer
chained-function construction pattern. This removes the horrible 15-parameter
constructor for the CallLoweringInfo in favour of setting properties of the call
via chained functions. No functional change beyond the removal of the old
constructors are intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209082 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary step to help ease the construction of CallLoweringInfo.
Changing the construction to a chained function pattern requires that the
parameter be nullable. However, rather than copying the vector, save a pointer
rather than the reference to permit a late binding of the arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209080 91177308-0d34-0410-b5e6-96231b3b80d8
The problem occurs when a non-i1 setcc is inverted. For example 'i8 = setcc' will get 'xor 0xff' to invert this. This is clearly wrong when the boolean contents are ZeroOrOne.
This patch introduces getLogicalNOT and updates SetCC legalisation to use it.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208641 91177308-0d34-0410-b5e6-96231b3b80d8
Right now the load may not get DCE'd because of the side-effect of updating
the base pointer.
This can happen if we lower a read-modify-write of an illegal larger type
(e.g. i48) such that the modification only affects one of the subparts (the
lower i32 part but not the higher i16 part). See the testcase.
In order to spot the dead load we need to revisit it when SimplifyDemandedBits
decided that the value of the load is masked off. This is the
CommitTargetLoweringOpt piece.
I checked compile time with ARM64 by sending SPEC bitcode files through llc.
No measurable change.
Fixes <rdar://problem/16031651>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208640 91177308-0d34-0410-b5e6-96231b3b80d8
We must validate the value type in TLI::getRegisterByName, because if we
don't and the wrong type was used with the IR intrinsic, then we'll assert
(because we won't be able to find a valid register class with which to
construct the requested copy operation). For PPC64, additionally, the type
information is necessary to decide between the 64-bit register and the 32-bit
subregister.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208508 91177308-0d34-0410-b5e6-96231b3b80d8
When using the ARM AAPCS, HFAs (Homogeneous Floating-point Aggregates) must
be passed in a block of consecutive floating-point registers, or on the stack.
This means that unused floating-point registers cannot be back-filled with
part of an HFA, however this can currently happen. This patch, along with the
corresponding clang patch (http://reviews.llvm.org/D3083) prevents this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208413 91177308-0d34-0410-b5e6-96231b3b80d8
When reducing the bitwidth of a comparison against a constant, the
original setcc's result type was used, which was incorrect.
No test since I don't think any other in tree targets change the
bitwidth of the setcc type depending on the bitwidth of the compared
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208236 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208104 91177308-0d34-0410-b5e6-96231b3b80d8
For pattern like ((x >> C1) & Mask) << C2, DAG combiner may convert it
into (x >> (C1-C2)) & (Mask << C2), which makes pattern matching of ubfx
more difficult.
For example:
Given
%shr = lshr i64 %x, 4
%and = and i64 %shr, 15
%arrayidx = getelementptr inbounds [8 x [64 x i64]]* @arr, i64 0, %i64 2, i64 %and
%0 = load i64* %arrayidx
With current shift folding, it takes 3 instrs to compute base address:
lsr x8, x0, #1
and x8, x8, #0x78
add x8, x9, x8
If using ubfx, it only needs 2 instrs:
ubfx x8, x0, #4, #4
add x8, x9, x8, lsl #3
This fixes bug 19589
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207702 91177308-0d34-0410-b5e6-96231b3b80d8
