This tends to happen a lot with bitfield code generated by clang. A simple example for x86_64 is
uint64_t foo(uint64_t x) { return (x&1) << 42; }
which used to compile into bloated code:
shlq $42, %rdi ## encoding: [0x48,0xc1,0xe7,0x2a]
movabsq $4398046511104, %rax ## encoding: [0x48,0xb8,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00]
andq %rdi, %rax ## encoding: [0x48,0x21,0xf8]
ret ## encoding: [0xc3]
with this patch we can fold the immediate into the and:
andq $1, %rdi ## encoding: [0x48,0x83,0xe7,0x01]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
shlq $42, %rax ## encoding: [0x48,0xc1,0xe0,0x2a]
ret ## encoding: [0xc3]
It's possible to save another byte by using 'andl' instead of 'andq' but I currently see no way of doing
that without making this code even more complicated. See the TODOs in the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129990 91177308-0d34-0410-b5e6-96231b3b80d8
- As before, there is a minor semantic change here (evidenced by the test
change) for Darwin triples that have no version component. I debated changing
the default behavior of isOSVersionLT, but decided it made more sense for
triples to be explicit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129805 91177308-0d34-0410-b5e6-96231b3b80d8
en-mass for C++ PODs. On my c++ test file, this cuts the fast isel rejects by 10x
and shrinks the generated .s file by 5%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129755 91177308-0d34-0410-b5e6-96231b3b80d8
when they are a truncate from something else. This eliminates fully half of all the
fastisel rejections on a test c++ file I'm working with, which should make a substantial
improvement for -O0 compile of c++ code.
This fixed rdar://9297003 - fast isel bails out on all functions taking bools
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129752 91177308-0d34-0410-b5e6-96231b3b80d8
Before we would bail out on i1 arguments all together, now we just bail on
non-constant ones. Also, we used to emit extraneous code. e.g. test12 was:
movb $0, %al
movzbl %al, %edi
callq _test12
and test13 was:
movb $0, %al
xorl %edi, %edi
movb %al, 7(%rsp)
callq _test13f
Now we get:
movl $0, %edi
callq _test12
and:
movl $0, %edi
callq _test13f
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129751 91177308-0d34-0410-b5e6-96231b3b80d8
value constraints on them (when defined as ImmLeaf's). This is particularly important
for X86-64, where almost all reg/imm instructions take a i64immSExt32 immediate operand,
which has a value constraint. Before this patch we ended up iseling the examples into
such amazing code as:
movabsq $7, %rax
imulq %rax, %rdi
movq %rdi, %rax
ret
now we produce:
imulq $7, %rdi, %rax
ret
This dramatically shrinks the generated code at -O0 on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129691 91177308-0d34-0410-b5e6-96231b3b80d8
2. implement rdar://9289501 - fast isel should fold trivial multiplies to shifts
3. teach tblgen to handle shift immediates that are different sizes than the
shifted operands, eliminating some code from the X86 fast isel backend.
4. Have FastISel::SelectBinaryOp use (the poorly named) FastEmit_ri_ function
instead of FastEmit_ri to simplify code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129666 91177308-0d34-0410-b5e6-96231b3b80d8
when we have a global variable base an an index. Instead, just give up on
folding the global variable.
Before we'd geenrate:
_test: ## @test
## BB#0:
movq _rtx_length@GOTPCREL(%rip), %rax
leaq (%rax), %rax
addq %rdi, %rax
movzbl (%rax), %eax
ret
now we generate:
_test: ## @test
## BB#0:
movq _rtx_length@GOTPCREL(%rip), %rax
movzbl (%rax,%rdi), %eax
ret
The difference is even more significant when there is a scale
involved.
This fixes rdar://9289558 - total fail with addr mode formation at -O0/x86-64
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129664 91177308-0d34-0410-b5e6-96231b3b80d8
less trivial things) into a dummy lea. Before we generated:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
leaq (%rax), %rax
ret
now we produce:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
ret
This is part of rdar://9289558
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129662 91177308-0d34-0410-b5e6-96231b3b80d8
The basic issue here is that bottom-up isel is matching the branch
and compare, and was failing to fold the load into the branch/compare
combo. Fixing this (by allowing folding into any instruction of a
sequence that is selected) allows us to produce things like:
cmpb $0, 52(%rax)
je LBB4_2
instead of:
movb 52(%rax), %cl
cmpb $0, %cl
je LBB4_2
This makes the generated -O0 code run a bit faster, but also speeds up
compile time by putting less pressure on the register allocator and
generating less code.
This was one of the biggest classes of missing load folding. Implementing
this shrinks 176.gcc's c-decl.s (as a random example) by about 4% in (verbose-asm)
line count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129656 91177308-0d34-0410-b5e6-96231b3b80d8
Returning a new node makes the code try to replace the old node, which
in the included testcase is killed by CSE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129650 91177308-0d34-0410-b5e6-96231b3b80d8
Change ELF systems to use CFI for producing the EH tables. This reduces the
size of the clang binary in Debug builds from 690MB to 679MB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129571 91177308-0d34-0410-b5e6-96231b3b80d8
This is done by pushing physical register definitions close to their
use, which happens to handle flag definitions if they're not glued to
the branch. This seems to be generally a good thing though, so I
didn't need to add a target hook yet.
The primary motivation is to generate code closer to what people
expect and rule out missed opportunity from enabling macro-op
fusion. As a side benefit, we get several 2-5% gains on x86
benchmarks. There is one regression:
SingleSource/Benchmarks/Shootout/lists slows down be -10%. But this is
an independent scheduler bug that will be tracked separately.
See rdar://problem/9283108.
Incidentally, pre-RA scheduling is only half the solution. Fixing the
later passes is tracked by:
<rdar://problem/8932804> [pre-RA-sched] on x86, attempt to schedule CMP/TEST adjacent with condition jump
Fixes:
<rdar://problem/9262453> Scheduler unnecessary break of cmp/jump fusion
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129508 91177308-0d34-0410-b5e6-96231b3b80d8
ignored. There was a test to catch this, but it was just blindly updated in
a large change. This fixes another part of <rdar://problem/9275290>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129466 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a first-class way to represent unaligned loads, the unaligned
load intrinsics are superfluous.
First part of <rdar://problem/8460511>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129401 91177308-0d34-0410-b5e6-96231b3b80d8
There can be multiple defs for a single virtual register when they are defining
sub-registers.
The missing <dead> flag was stopping the inline spiller from eliminating dead
code after rematerialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128888 91177308-0d34-0410-b5e6-96231b3b80d8
When a virtual register has a single value that is defined as a copy of a
reserved register, permit that copy to be joined. These virtual register are
usually copies of the stack pointer:
%vreg75<def> = COPY %ESP; GR32:%vreg75
MOV32mr %vreg75, 1, %noreg, 0, %noreg, %vreg74<kill>
MOV32mi %vreg75, 1, %noreg, 8, %noreg, 0
MOV32mi %vreg75<kill>, 1, %noreg, 4, %noreg, 0
CALLpcrel32 ...
Coalescing these virtual registers early decreases register pressure.
Previously, they were coalesced by RALinScan::attemptTrivialCoalescing after
register allocation was completed.
The lower register pressure causes the mcinst-lowering-cmp0.ll test case to fail
because it depends on linear scan spilling a particular register.
I am deleting 2008-08-05-SpillerBug.ll because it is counting the number of
instructions emitted, and its revision history shows the 'correct' count being
edited many times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128845 91177308-0d34-0410-b5e6-96231b3b80d8
This way, shrinkToUses() will ignore the instruction that is about to be
deleted, and we avoid leaving invalid live ranges that SplitKit doesn't like.
Fix a misunderstanding in MachineVerifier about <def,undef> operands. The
<undef> flag is valid on def operands where it has the same meaning as <undef>
on a use operand. It only applies to sub-register defines which also read the
full register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128642 91177308-0d34-0410-b5e6-96231b3b80d8
becomes reachable when before it wasn't). Check to make sure that it's not null
before trying to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128434 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly terminate the range of register DBG_VALUEs when the register is
clobbered or when the basic block ends.
The code is now ready to deal with variables that are sometimes in a register
and sometimes on the stack. We just need to teach emitDebugLoc to say 'stack
slot'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128327 91177308-0d34-0410-b5e6-96231b3b80d8
The .dot directives don't need labels, that is a leftover from when we created
line number info manually.
Instructions following a DBG_VALUE can share its label since the DBG_VALUE
doesn't produce any code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128284 91177308-0d34-0410-b5e6-96231b3b80d8
I'm backing this out for the second time. It was supposed to be fixed by r128164, but the mingw self-host must be defeating the fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128181 91177308-0d34-0410-b5e6-96231b3b80d8
This will extend the ranges of debug info variables in registers until they are
clobbered.
Fix 1: Don't mistake DBG_VALUE instructions referring to incoming arguments on
the stack with DBG_VALUE instructions referring to variables in the frame
pointer. This fixes the gdb test-suite failure.
Fix 2: Don't trace through copies to physical registers setting up call
arguments. These registers are call clobbered, and the source register is more
likely to be a callee-saved register that can be extended through the call
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128114 91177308-0d34-0410-b5e6-96231b3b80d8
Temporarily reverting these to see if we can get llvm-objdump to link. Hopefully this is not the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128097 91177308-0d34-0410-b5e6-96231b3b80d8
These ranges get completely jumbled by the post-ra scheduler, and it is not
really reasonable to expect it to make sense of them.
Instead, teach DwarfDebug to notice when user variables in registers are
clobbered, and terminate the ranges there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128045 91177308-0d34-0410-b5e6-96231b3b80d8
to have single return block (at least getting there) for optimizations. This
is general goodness but it would prevent some tailcall optimizations.
One specific case is code like this:
int f1(void);
int f2(void);
int f3(void);
int f4(void);
int f5(void);
int f6(void);
int foo(int x) {
switch(x) {
case 1: return f1();
case 2: return f2();
case 3: return f3();
case 4: return f4();
case 5: return f5();
case 6: return f6();
}
}
=>
LBB0_2: ## %sw.bb
callq _f1
popq %rbp
ret
LBB0_3: ## %sw.bb1
callq _f2
popq %rbp
ret
LBB0_4: ## %sw.bb3
callq _f3
popq %rbp
ret
This patch teaches codegenprep to duplicate returns when the return value
is a phi and where the phi operands are produced by tail calls followed by
an unconditional branch:
sw.bb7: ; preds = %entry
%call8 = tail call i32 @f5() nounwind
br label %return
sw.bb9: ; preds = %entry
%call10 = tail call i32 @f6() nounwind
br label %return
return:
%retval.0 = phi i32 [ %call10, %sw.bb9 ], [ %call8, %sw.bb7 ], ... [ 0, %entry ]
ret i32 %retval.0
This allows codegen to generate better code like this:
LBB0_2: ## %sw.bb
jmp _f1 ## TAILCALL
LBB0_3: ## %sw.bb1
jmp _f2 ## TAILCALL
LBB0_4: ## %sw.bb3
jmp _f3 ## TAILCALL
rdar://9147433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127953 91177308-0d34-0410-b5e6-96231b3b80d8
not have native support for this operation (such as X86).
The legalized code uses two vector INT_TO_FP operations and is faster
than scalarizing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127951 91177308-0d34-0410-b5e6-96231b3b80d8
comparisons on x86. Essentially, the way this works is that SUB+SBB sets
the relevant flags the same way a double-width CMP would.
This is a substantial improvement over the generic lowering in LLVM. The output
is also shorter than the gcc-generated output; I haven't done any detailed
benchmarking, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127852 91177308-0d34-0410-b5e6-96231b3b80d8
rather than an int. Thankfully, this only causes LLVM to miss optimizations, not
generate incorrect code.
This just fixes the zext at the return. We still insert an i32 ZextAssert when
reading a function's arguments, but it is followed by a truncate and another i8
ZextAssert so it is not optimized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127766 91177308-0d34-0410-b5e6-96231b3b80d8
conforms to the ABI, but DAGCombine could in theory recognize the sequence of
zext asserts and truncates and generate incorrect code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127754 91177308-0d34-0410-b5e6-96231b3b80d8
Optimize trivial branches in CodeGenPrepare, which often get created from the
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127498 91177308-0d34-0410-b5e6-96231b3b80d8
protector insertion not working correctly with unreachable code. Since that
revision was rolled out, this test doesn't actual fail before this fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127497 91177308-0d34-0410-b5e6-96231b3b80d8
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127459 91177308-0d34-0410-b5e6-96231b3b80d8
corresponding testcases back to the previous versions.
Fixes some performance regressions only seen on 32-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127441 91177308-0d34-0410-b5e6-96231b3b80d8
The damage done by physreg coalescing only depends on the number of instructions
the extended physreg live range covers. This fixes PR9438.
The heuristic is still luck-based, and physreg coalescing really should be
disabled completely. We need a register allocator with better hinting support
before that is possible.
Convert a test to FileCheck and force spilling by inserting an extra call. The
previous spilling behavior was dependent on misguided physreg coalescing
decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127351 91177308-0d34-0410-b5e6-96231b3b80d8
The test is derived from an old miscompilation of
MultiSource/Benchmarks/VersaBench/8b10b which is run regularly, so we are not
losing coverage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127350 91177308-0d34-0410-b5e6-96231b3b80d8
testcases accordingly. Some are currently xfailed and will be filed
as bugs to be fixed or understood.
Performance results:
roughly neutral on SPEC
some micro benchmarks in the llvm suite are up between 100 and 150%, only
a pair of regressions that are due to be investigated
john-the-ripper saw:
10% improvement in traditional DES
8% improvement in BSDI DES
59% improvement in FreeBSD MD5
67% improvement in OpenBSD Blowfish
14% improvement in LM DES
Small compile time impact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127208 91177308-0d34-0410-b5e6-96231b3b80d8
bitcasts, which are really no-ops here. This fixes slowdowns on
MultiSource/Applications/aha and others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127031 91177308-0d34-0410-b5e6-96231b3b80d8
missing patterns for them.
Add a SIMD test subdirectory to hold tests for SIMD instruction
selection correctness and quality.
'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126845 91177308-0d34-0410-b5e6-96231b3b80d8
It improves Win64's prologue/epilogue but it would not affect ia32 and amd64 (lack of nonvolatile XMMs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126568 91177308-0d34-0410-b5e6-96231b3b80d8
1. Inform users of ADDEs with two 0 operands that it never sets carry
2. Fold other ADDs or ADDCs into the ADDE if possible
It would be neat if we could do the same thing for SETCC+ADD eventually, but we can't do that in target independent code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126557 91177308-0d34-0410-b5e6-96231b3b80d8
Limit the folding of any_ext and sext into the load operation to scalars.
Limit the active-bits trunc optimization to scalars.
Document vector trunc and vector sext in LangRef.
Similar to commit 126080 (for enabling zext).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126424 91177308-0d34-0410-b5e6-96231b3b80d8
registers at phis. This enables us to eliminate a lot of pointless zexts during
the DAGCombine phase. This fixes <rdar://problem/8760114>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126380 91177308-0d34-0410-b5e6-96231b3b80d8
at phis. This enables us to eliminate a lot of pointless zexts during the DAGCombine
phase. This fixes <rdar://problem/8760114>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126170 91177308-0d34-0410-b5e6-96231b3b80d8
In other words, do not keep track of argument's location. The debugger (gdb) is not prepared to see line table entries for arguments. For the debugger, "second" line table entry marks beginning of function body.
This requires some coordination with debugger to get this working.
- The debugger needs to be aware of prolog_end attribute attached with line table entries.
- The compiler needs to accurately mark prolog_end in line table entries (at -O0 and at -O1+)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126155 91177308-0d34-0410-b5e6-96231b3b80d8
"dllimport" function must not be GlobalVariable, but Function. It is enough to check with GlobalValue.
test/CodeGen/X86/dll-linkage.ll is updated to check llc -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126110 91177308-0d34-0410-b5e6-96231b3b80d8
of a constant had a minor typo introduced when copying it from the book, which
caused it to favor negative approximations over positive approximations in many
cases. Positive approximations require fewer operations beyond the multiplication.
In the case of division by 3, we still generate code that is a single instruction
larger than GCC's code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126097 91177308-0d34-0410-b5e6-96231b3b80d8
test for that. With this change, test/CodeGen/X86/codegen-dce.ll no longer finds
any instructions to DCE, so delete the test.
Also renamed J and JP to I and IP in RecursivelyDeleteDeadPHINode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126088 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombiner folds the zext into complex load instructions. This patch
prevents this optimization on vectors since none of the supported targets
knows how to perform load+vector_zext in one instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126080 91177308-0d34-0410-b5e6-96231b3b80d8
No one uses *-mingw64. mingw-w64 is represented as {i686|x86_64}-w64-mingw32. In llvm side, i686 and x64 can be treated as similar way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125747 91177308-0d34-0410-b5e6-96231b3b80d8
transformation if we can't legally create a build vector of the correct
type. Check that we can make the transformation first, and add a TODO to
refactor this code with similar cases.
Fixes: PR9223 and rdar://9000350
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125631 91177308-0d34-0410-b5e6-96231b3b80d8
Machine instruction range consisting of only DBG_VALUE MIs only contributes consecutive labels in assembly output, which is harmless, and empty scope entry in DebugInfo, which confuses debugger tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125577 91177308-0d34-0410-b5e6-96231b3b80d8
have their low bits set to zero. This allows us to optimize
out explicit stack alignment code like in stack-align.ll:test4 when
it is redundant.
Doing this causes the code generator to start turning FI+cst into
FI|cst all over the place, which is general goodness (that is the
canonical form) except that various pieces of the code generator
don't handle OR aggressively. Fix this by introducing a new
SelectionDAG::isBaseWithConstantOffset predicate, and using it
in places that are looking for ADD(X,CST). The ARM backend in
particular was missing a lot of addressing mode folding opportunities
around OR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125470 91177308-0d34-0410-b5e6-96231b3b80d8
the shift amounts are in a suitably wide type so that
we don't generate out of range constant shift amounts.
This fixes PR9028.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125458 91177308-0d34-0410-b5e6-96231b3b80d8
Reversing the operands allows us to fold, but doesn't force us to. Also, at
this point the DAG is still being optimized, so the check for hasOneUse is not
very precise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124773 91177308-0d34-0410-b5e6-96231b3b80d8
This happens all the time when a smul is promoted to a larger type.
On x86-64 we now compile "int test(int x) { return x/10; }" into
movslq %edi, %rax
imulq $1717986919, %rax, %rax
movq %rax, %rcx
shrq $63, %rcx
sarq $34, %rax <- used to be "shrq $32, %rax; sarl $2, %eax"
addl %ecx, %eax
This fires 96 times in gcc.c on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124559 91177308-0d34-0410-b5e6-96231b3b80d8
to add/sub by doing the normal operation and then checking for overflow
afterwards. This generally relies on the DAG handling the later invalid
operations as well.
Fixes the 64-bit part of rdar://8622122 and rdar://8774702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123908 91177308-0d34-0410-b5e6-96231b3b80d8
This shaves off 4 popcounts from the hacked 186.crafty source.
This is enabled even when a native popcount instruction is available. The
combined code is one operation longer but it should be faster nevertheless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123621 91177308-0d34-0410-b5e6-96231b3b80d8
into and/shift would cause nodes to move around and a dangling pointer
to happen. The code tried to avoid this with a HandleSDNode, but
got the details wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123578 91177308-0d34-0410-b5e6-96231b3b80d8
