This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179957 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, when spilling 64-bit paired registers, an LDMIA with both
a FrameIndex and an offset was produced. This kind of instruction
shouldn't exist, and the extra operand was being confused with the
predicate, causing aborts later on.
This removes the invalid 0-offset from the instruction being
produced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179956 91177308-0d34-0410-b5e6-96231b3b80d8
The logic that actually compares the types considers pointers and integers the
same if they are of the same size. This created a strange mismatch between hash
and reality and made the test case for this fail on some platforms (yay,
test cases).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179905 91177308-0d34-0410-b5e6-96231b3b80d8
When matching a compare with a subtract where the arguments of the compare are
swapped w.r.t. the arguments of the subtract, we need to negate the predicates
(or CR bit indices) of the users. This, however, is not the same as inverting
the predicate (negating LT -> GT, but inverting LT -> GE, for example). The ARM
backend seems to do this correctly, but when I adapted the code for the PPC
backend, I introduced an error in this logic.
Comparison optimization is now enabled again by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179899 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks to Evgeniy Stepanov for reporting this.
It might be a good idea to add a command iterator abstraction to MachO.h, but
this fixes the bug for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179848 91177308-0d34-0410-b5e6-96231b3b80d8
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179836 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to cause a stage-2 LLVM compile failure (by crashing TableGen); do
I'm disabling this for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179807 91177308-0d34-0410-b5e6-96231b3b80d8
Many PPC instructions have a so-called 'record form' which stores to a specific
condition register the result of comparing the result of the instruction with
zero (always as a signed comparison). For integer operations on PPC64, this is
always a 64-bit comparison.
This implementation is derived from the implementation in the ARM backend;
there are some differences because PPC condition registers are allocatable
virtual registers (although the record forms always use a specific one), and we
look for a matching subtraction instruction after the compare (but before the
first use) in addition to before it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179802 91177308-0d34-0410-b5e6-96231b3b80d8
In X86FastISel::X86SelectStore(), improperly aligned stores are rejected and
handled by the DAG-based ISel. However, X86FastISel::X86SelectLoad() makes
no such requirement. There doesn't appear to be an x86 architectural
correctness issue with allowing potentially unaligned store instructions.
This patch removes this restriction.
Patch by Jim Stichnot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179774 91177308-0d34-0410-b5e6-96231b3b80d8
A min/max operation is represented by a select(cmp(lt/le/gt/ge, X, Y), X, Y)
sequence in LLVM. If we see such a sequence we can treat it just as any other
commutative binary instruction and reduce it.
This appears to help bzip2 by about 1.5% on an imac12,2.
radar://12960601
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179773 91177308-0d34-0410-b5e6-96231b3b80d8
This occurs due to an alloca representing a separate ownership from the
original pointer. Thus consider the following pseudo-IR:
objc_retain(%a)
for (...) {
objc_retain(%a)
%block <- %a
F(%block)
objc_release(%block)
}
objc_release(%a)
From the perspective of the optimizer, the %block is a separate
provenance from the original %a. Thus the optimizer pairs up the inner
retain for %a and the outer release from %a, resulting in segfaults.
This is fixed by noting that the signature of a mismatch of
retain/releases inside the for loop is a Use/CanRelease top down with an
None bottom up (since bottom up the Retain-CanRelease-Use-Release
sequence is completed by the inner objc_retain, but top down due to the
differing provenance from the objc_release said sequence is not
completed). In said case in CheckForCFGHazards, we now clear the state
of %a implying that no pairing will occur.
Additionally a test case is included.
rdar://12969722
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179747 91177308-0d34-0410-b5e6-96231b3b80d8
unable to handle cases such as __asm mov eax, 8*-8.
This patch also attempts to simplify the state machine. Further, the error
reporting has been improved. Test cases included, but more will be added to
the clang side shortly.
rdar://13668445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179719 91177308-0d34-0410-b5e6-96231b3b80d8
for the sdiv/srem/udiv/urem bitcode instructions. This is done for the i8,
i16, and i32 types, as well as i64 for the x86_64 target.
Patch by Jim Stichnoth
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179715 91177308-0d34-0410-b5e6-96231b3b80d8
The reference manual defines only 5 permitted values for the immediate field of the "hint" instruction:
1. nop (imm == 0)
2. yield (imm == 1)
3. wfe (imm == 2)
4. wfi (imm == 3)
5. sev (imm == 4)
Therefore, restrict the permitted values for the "hint" instruction to 0 through 4.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179707 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the Mips assembler to parse and emit nested
expressions as instruction operands. It also extends the
expansion of memory instructions when an offset is given as
an expression.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179657 91177308-0d34-0410-b5e6-96231b3b80d8
If a switch instruction has a case for every possible value of its type,
with the same successor, SimplifyCFG would replace it with an icmp ult,
but the computation of the bound overflows in that case, which inverts
the test.
Patch by Jed Davis!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179587 91177308-0d34-0410-b5e6-96231b3b80d8
These are aliases for VACGT and VACGE, respectively, with the source
operands reversed.
rdar://13638090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179575 91177308-0d34-0410-b5e6-96231b3b80d8
Two return types are not equivalent if one is a pointer and the other is an
integral. This is because we cannot bitcast a pointer to an integral value.
PR15185
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179569 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the assembler to recognize $fcc0
as a valid register for conditional move instructions.
Corresponding test cases have been added.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179567 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of emitting config values in a predefined order, the code
emitter will now emit a 32-bit register index followed by the 32-bit
config value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179546 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition
registers, the spill location is specified relative to the stack pointer (SP +
8). However, this is not relative to the SP after the new stack frame is
established, but instead relative to the caller's stack pointer (it is stored
into the linkage area of the parent's stack frame).
So, like with the link register, we don't directly spill the CRs with other
callee-saved registers, but just mark them to be spilled during prologue
generation.
In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
One performs: (X == 13 | X == 14) -> X-13 <u 2
The other: (A == C1 || A == C2) -> (A & ~(C1 ^ C2)) == C1
The problem is that there are certain values of C1 and C2 that
trigger both transforms but the first one blocks out the second,
this generates suboptimal code.
Reordering the transforms should be better in every case and
allows us to do interesting stuff like turn:
%shr = lshr i32 %X, 4
%and = and i32 %shr, 15
%add = add i32 %and, -14
%tobool = icmp ne i32 %add, 0
into:
%and = and i32 %X, 240
%tobool = icmp ne i32 %and, 224
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179493 91177308-0d34-0410-b5e6-96231b3b80d8
This is the default model for non-PIC 64-bit code. It supports
text+data+bss linked anywhere in the low 16 TB of the address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179473 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, only abs32 and pic32 are implemented. Add a test case for
abs32 with 64-bit code. 64-bit PIC code is currently broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179463 91177308-0d34-0410-b5e6-96231b3b80d8
This is basically the same fix in three different places. We use a set to avoid
walking the whole tree of a big ConstantExprs multiple times.
For example: (select cmp, (add big_expr 1), (add big_expr 2))
We don't want to visit big_expr twice here, it may consist of thousands of
nodes.
The testcase exercises this by creating an insanely large ConstantExprs out of
a loop. It's questionable if the optimizer should ever create those, but this
can be triggered with real C code. Fixes PR15714.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179458 91177308-0d34-0410-b5e6-96231b3b80d8
For functions that need to spill CRs, and have dynamic stack allocations, the
value of the SP during the restore is not what it was during the save, and so
we need to use the FP in these cases (as for all of the other spills and
restores, but the CR restore has a special code path because its reserved slot,
like the link register, is specified directly relative to the adjusted SP).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179457 91177308-0d34-0410-b5e6-96231b3b80d8
The register allocator expects minimal physreg live ranges. Schedule
physreg copies accordingly. This is slightly tricky when they occur in
the middle of the scheduling region. For now, this is handled by
rescheduling the copy when its associated instruction is
scheduled. Eventually we may instead bundle them, but only if we can
preserve the bundles as parallel copies during regalloc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179449 91177308-0d34-0410-b5e6-96231b3b80d8
We are now able to handle big endian macho files in llvm-readobject. Thanks to
David Fang for providing the object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179440 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.
This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179398 91177308-0d34-0410-b5e6-96231b3b80d8
These tests rely specifically on the names of ELF relocations, let alone any
other detail. There's no way they'd work if LLVM was emitting something else by
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179376 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out some platforms (e.g. Windows) lay out their llvm-mc slightly
differently with extra newlines; there was no real reason for the test lines to
be consecutive, so this relaxes the FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179375 91177308-0d34-0410-b5e6-96231b3b80d8
This test ensures that relocation type names returned by libObject match
the raw relocation type value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179360 91177308-0d34-0410-b5e6-96231b3b80d8
When debugging performance regressions we often ask ourselves if the regression
that we see is due to poor isel/sched/ra or due to some micro-architetural
problem. When comparing two code sequences one good way to rule out front-end
bottlenecks (and other the issues) is to force code alignment. This pass adds
a flag that forces the alignment of all of the basic blocks in the program.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179353 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Print more information about relocations.
With this patch llvm-readobj now prints if a relocation is pcrel, its length,
if it is extern and if it is scattered.
It also refactors the code a bit to use bit fields instead of shifts and
masks all over the place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179345 91177308-0d34-0410-b5e6-96231b3b80d8
Added PathAliases to check if two struct-path tags can alias.
Added command line option -struct-path-tbaa.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179337 91177308-0d34-0410-b5e6-96231b3b80d8
With this patch llvm-readobj now prints if a relocation is pcrel, its length,
if it is extern and if it is scattered.
It also refactors the code a bit to use bit fields instead of shifts and
masks all over the place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179294 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to collapse sequences of insertelement/extractelement
instructions into single shuffle instructions, there is one specific
case where the Instruction Combiner wrongly updates the resulting
Mask of shuffle indexes.
The problem is in function CollectShuffleElments.
If we have a sequence of insert/extract element instructions
like the one below:
%tmp1 = extractelement <4 x float> %LHS, i32 0
%tmp2 = insertelement <4 x float> %RHS, float %tmp1, i32 1
%tmp3 = extractelement <4 x float> %RHS, i32 2
%tmp4 = insertelement <4 x float> %tmp2, float %tmp3, i32 3
Where:
. %RHS will have a mask of [4,5,6,7]
. %LHS will have a mask of [0,1,2,3]
The Mask of shuffle indexes is wrongly computed to [4,1,6,7]
instead of [4,0,6,7].
When analyzing %tmp2 in order to compute the Mask for the
resulting shuffle instruction, the algorithm forgets to update
the mask index at position 1 with the index associated to the
element extracted from %LHS by instruction %tmp1.
Patch by Andrea DiBiagio!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179291 91177308-0d34-0410-b5e6-96231b3b80d8
As packed comparisons in AVX/SSE produce all 0s or all 1s in each SIMD lane,
vector select could be simplified to AND/OR or removed if one or both values
being selected is all 0s or all 1s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179267 91177308-0d34-0410-b5e6-96231b3b80d8
As these two instructions in AVX extension are privileged instructions for
special purpose, it's only expected to be used in inlined assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179266 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is revised based on patch from Victor Umansky
<victor.umansky@intel.com>. More cases are handled in X86's bool
simplification, i.e.
- SETCC_CARRY
- value is truncated to i1 with AND
As a by-product, PR5443 is also fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179265 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179240 91177308-0d34-0410-b5e6-96231b3b80d8
In the simple and triangle if-conversion cases, when CopyAndPredicateBlock is
used because the to-be-predicated block has other predecessors, we need to
explicitly remove the old copied block from the successors list. Normally if
conversion relies on TII->AnalyzeBranch combined with BB->CorrectExtraCFGEdges
to cleanup the successors list, but if the predicated block contained an
un-analyzable branch (such as a now-predicated return), then this will fail.
These extra successors were causing a problem on PPC because it was causing
later passes (such as PPCEarlyReturm) to leave dead return-only basic blocks in
the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179227 91177308-0d34-0410-b5e6-96231b3b80d8
temporarily while we work on plumbing through some changes to continue
supporting gdb on darwin.
This reverts commit r179122.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179222 91177308-0d34-0410-b5e6-96231b3b80d8
to disable following tests for Hexagon that require direct object
generation support.
DebugInfo/dwarf-public-names.ll
DebugInfo/dwarf-version.ll
DebugInfo/member-pointers.ll
DebugInfo/namespace.ll
DebugInfo/two-cus-from-same-file.ll
Fixes bug 15616 - http://llvm.org/bugs/show_bug.cgi?id=15616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179209 91177308-0d34-0410-b5e6-96231b3b80d8
Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this
would happen as long as floating point instructions are not needed.
Probably it would also make sense to compile as mips32 if atomic operations
are needed too. There may be other cases too.
A module pass prescans the IR and adds the mips16 or nomips16 attribute
to functions depending on the functions needs.
Mips 16 mode can result in a 40% code compression by utililizing 16 bit
encoding of many instructions.
The hope is for this to replace the traditional gcc way of dealing with
Mips16 code using floating point which involves essentially using soft float
but with a library implemented using mips32 floating point. This gcc
method also requires creating stubs so that Mips32 code can interact with
these Mips 16 functions that have floating point needs. My conjecture is
that in reality this traditional gcc method would never win over this
new method.
I will be implementing the traditional gcc method also. Some of it is already
done but I needed to do the stubs to finish the work and those required
this mips16/32 mixed mode capability.
I have more ideas for to make this new method much better and I think the old
method will just live in llvm for anyone that needs the backward compatibility
but I don't for what reason that would be needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I did a local comparison between using bash and using lit's runner, and
more of the suite passes with lit than passes with bash. Most of the
bash failures have to do with /dev/null, which is nonsensical on
Windows, but the lit runner handles it.
The lit shell runner is also much faster than bash, so I would expect
most Windows devs would want it by default.
The behavior can be overridden on any OS by setting
LIT_USE_INTERNAL_SHELL to 0 or 1 in the environment.
Reviewers: chapuni, ddunbar
CC: llvm-commits, timurrrr
Differential Revision: http://llvm-reviews.chandlerc.com/D559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179173 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
Depending on the number of bits set in the writemask.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179166 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179165 91177308-0d34-0410-b5e6-96231b3b80d8
