llvm-6502/lib/Target/PowerPC/PPCInstrInfo.td

2619 lines
116 KiB
TableGen
Raw Normal View History

//===-- PPCInstrInfo.td - The PowerPC Instruction Set ------*- tablegen -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file describes the subset of the 32-bit PowerPC instruction set, as used
// by the PowerPC instruction selector.
//
//===----------------------------------------------------------------------===//
include "PPCInstrFormats.td"
//===----------------------------------------------------------------------===//
// PowerPC specific type constraints.
//
def SDT_PPCstfiwx : SDTypeProfile<0, 2, [ // stfiwx
SDTCisVT<0, f64>, SDTCisPtrTy<1>
]>;
def SDT_PPClfiwx : SDTypeProfile<1, 1, [ // lfiw[az]x
SDTCisVT<0, f64>, SDTCisPtrTy<1>
]>;
def SDT_PPCCallSeqStart : SDCallSeqStart<[ SDTCisVT<0, i32> ]>;
def SDT_PPCCallSeqEnd : SDCallSeqEnd<[ SDTCisVT<0, i32>,
SDTCisVT<1, i32> ]>;
def SDT_PPCvperm : SDTypeProfile<1, 3, [
SDTCisVT<3, v16i8>, SDTCisSameAs<0, 1>, SDTCisSameAs<0, 2>
]>;
def SDT_PPCvcmp : SDTypeProfile<1, 3, [
SDTCisSameAs<0, 1>, SDTCisSameAs<1, 2>, SDTCisVT<3, i32>
]>;
def SDT_PPCcondbr : SDTypeProfile<0, 3, [
SDTCisVT<0, i32>, SDTCisVT<2, OtherVT>
]>;
def SDT_PPClbrx : SDTypeProfile<1, 2, [
SDTCisInt<0>, SDTCisPtrTy<1>, SDTCisVT<2, OtherVT>
]>;
def SDT_PPCstbrx : SDTypeProfile<0, 3, [
SDTCisInt<0>, SDTCisPtrTy<1>, SDTCisVT<2, OtherVT>
]>;
def SDT_PPClarx : SDTypeProfile<1, 1, [
SDTCisInt<0>, SDTCisPtrTy<1>
]>;
def SDT_PPCstcx : SDTypeProfile<0, 2, [
SDTCisInt<0>, SDTCisPtrTy<1>
]>;
def SDT_PPCTC_ret : SDTypeProfile<0, 2, [
SDTCisPtrTy<0>, SDTCisVT<1, i32>
]>;
//===----------------------------------------------------------------------===//
// PowerPC specific DAG Nodes.
//
def PPCfre : SDNode<"PPCISD::FRE", SDTFPUnaryOp, []>;
def PPCfrsqrte: SDNode<"PPCISD::FRSQRTE", SDTFPUnaryOp, []>;
def PPCfcfid : SDNode<"PPCISD::FCFID", SDTFPUnaryOp, []>;
def PPCfcfidu : SDNode<"PPCISD::FCFIDU", SDTFPUnaryOp, []>;
def PPCfcfids : SDNode<"PPCISD::FCFIDS", SDTFPRoundOp, []>;
def PPCfcfidus: SDNode<"PPCISD::FCFIDUS", SDTFPRoundOp, []>;
def PPCfctidz : SDNode<"PPCISD::FCTIDZ", SDTFPUnaryOp, []>;
def PPCfctiwz : SDNode<"PPCISD::FCTIWZ", SDTFPUnaryOp, []>;
def PPCfctiduz: SDNode<"PPCISD::FCTIDUZ",SDTFPUnaryOp, []>;
def PPCfctiwuz: SDNode<"PPCISD::FCTIWUZ",SDTFPUnaryOp, []>;
def PPCstfiwx : SDNode<"PPCISD::STFIWX", SDT_PPCstfiwx,
[SDNPHasChain, SDNPMayStore]>;
def PPClfiwax : SDNode<"PPCISD::LFIWAX", SDT_PPClfiwx,
[SDNPHasChain, SDNPMayLoad]>;
def PPClfiwzx : SDNode<"PPCISD::LFIWZX", SDT_PPClfiwx,
[SDNPHasChain, SDNPMayLoad]>;
// Extract FPSCR (not modeled at the DAG level).
def PPCmffs : SDNode<"PPCISD::MFFS",
SDTypeProfile<1, 0, [SDTCisVT<0, f64>]>, []>;
// Perform FADD in round-to-zero mode.
def PPCfaddrtz: SDNode<"PPCISD::FADDRTZ", SDTFPBinOp, []>;
def PPCfsel : SDNode<"PPCISD::FSEL",
// Type constraint for fsel.
SDTypeProfile<1, 3, [SDTCisSameAs<0, 2>, SDTCisSameAs<0, 3>,
SDTCisFP<0>, SDTCisVT<1, f64>]>, []>;
def PPChi : SDNode<"PPCISD::Hi", SDTIntBinOp, []>;
def PPClo : SDNode<"PPCISD::Lo", SDTIntBinOp, []>;
def PPCtoc_entry: SDNode<"PPCISD::TOC_ENTRY", SDTIntBinOp, [SDNPMayLoad]>;
def PPCvmaddfp : SDNode<"PPCISD::VMADDFP", SDTFPTernaryOp, []>;
def PPCvnmsubfp : SDNode<"PPCISD::VNMSUBFP", SDTFPTernaryOp, []>;
def PPCaddisGotTprelHA : SDNode<"PPCISD::ADDIS_GOT_TPREL_HA", SDTIntBinOp>;
def PPCldGotTprelL : SDNode<"PPCISD::LD_GOT_TPREL_L", SDTIntBinOp,
[SDNPMayLoad]>;
def PPCaddTls : SDNode<"PPCISD::ADD_TLS", SDTIntBinOp, []>;
This patch implements the general dynamic TLS model for 64-bit PowerPC. Given a thread-local symbol x with global-dynamic access, the generated code to obtain x's address is: Instruction Relocation Symbol addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x R_PPC64_REL24 __tls_get_addr nop <use address in r3> The implementation borrows from the medium code model work for introducing special forms of ADDIS and ADDI into the DAG representation. This is made slightly more complicated by having to introduce a call to the external function __tls_get_addr. Using the full call machinery is overkill and, more importantly, makes it difficult to add a special relocation. So I've introduced another opcode GET_TLS_ADDR to represent the function call, and surrounded it with register copies to set up the parameter and return value. Most of the code is pretty straightforward. I ran into one peculiarity when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like BL8_NOP_ELF except that it takes another parameter to represent the symbol ("x" above) that requires a relocation on the call. Something in the TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated identically during the emit phase, so this second operand was never visited to generate relocations. This is the reason for the slightly messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding(). Two new tests are included to demonstrate correct external assembly and correct generation of relocations using the integrated assembler. Comments welcome! Thanks, Bill git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-11 20:30:11 +00:00
def PPCaddisTlsgdHA : SDNode<"PPCISD::ADDIS_TLSGD_HA", SDTIntBinOp>;
def PPCaddiTlsgdL : SDNode<"PPCISD::ADDI_TLSGD_L", SDTIntBinOp>;
def PPCgetTlsAddr : SDNode<"PPCISD::GET_TLS_ADDR", SDTIntBinOp>;
def PPCaddisTlsldHA : SDNode<"PPCISD::ADDIS_TLSLD_HA", SDTIntBinOp>;
def PPCaddiTlsldL : SDNode<"PPCISD::ADDI_TLSLD_L", SDTIntBinOp>;
def PPCgetTlsldAddr : SDNode<"PPCISD::GET_TLSLD_ADDR", SDTIntBinOp>;
def PPCaddisDtprelHA : SDNode<"PPCISD::ADDIS_DTPREL_HA", SDTIntBinOp,
[SDNPHasChain]>;
def PPCaddiDtprelL : SDNode<"PPCISD::ADDI_DTPREL_L", SDTIntBinOp>;
def PPCvperm : SDNode<"PPCISD::VPERM", SDT_PPCvperm, []>;
// These nodes represent the 32-bit PPC shifts that operate on 6-bit shift
// amounts. These nodes are generated by the multi-precision shift code.
def PPCsrl : SDNode<"PPCISD::SRL" , SDTIntShiftOp>;
def PPCsra : SDNode<"PPCISD::SRA" , SDTIntShiftOp>;
def PPCshl : SDNode<"PPCISD::SHL" , SDTIntShiftOp>;
// These are target-independent nodes, but have target-specific formats.
def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_PPCCallSeqStart,
[SDNPHasChain, SDNPOutGlue]>;
def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_PPCCallSeqEnd,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def SDT_PPCCall : SDTypeProfile<0, -1, [SDTCisInt<0>]>;
def PPCcall : SDNode<"PPCISD::CALL", SDT_PPCCall,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
SDNPVariadic]>;
def PPCcall_nop : SDNode<"PPCISD::CALL_NOP", SDT_PPCCall,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
SDNPVariadic]>;
def PPCload : SDNode<"PPCISD::LOAD", SDTypeProfile<1, 1, []>,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def PPCload_toc : SDNode<"PPCISD::LOAD_TOC", SDTypeProfile<0, 1, []>,
[SDNPHasChain, SDNPSideEffect,
SDNPInGlue, SDNPOutGlue]>;
def PPCtoc_restore : SDNode<"PPCISD::TOC_RESTORE", SDTypeProfile<0, 0, []>,
[SDNPHasChain, SDNPSideEffect,
SDNPInGlue, SDNPOutGlue]>;
def PPCmtctr : SDNode<"PPCISD::MTCTR", SDT_PPCCall,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def PPCbctrl : SDNode<"PPCISD::BCTRL", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue,
SDNPVariadic]>;
def retflag : SDNode<"PPCISD::RET_FLAG", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>;
def PPCtc_return : SDNode<"PPCISD::TC_RETURN", SDT_PPCTC_ret,
[SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>;
def PPCeh_sjlj_setjmp : SDNode<"PPCISD::EH_SJLJ_SETJMP",
SDTypeProfile<1, 1, [SDTCisInt<0>,
SDTCisPtrTy<1>]>,
[SDNPHasChain, SDNPSideEffect]>;
def PPCeh_sjlj_longjmp : SDNode<"PPCISD::EH_SJLJ_LONGJMP",
SDTypeProfile<0, 1, [SDTCisPtrTy<0>]>,
[SDNPHasChain, SDNPSideEffect]>;
def SDT_PPCsc : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
def PPCsc : SDNode<"PPCISD::SC", SDT_PPCsc,
[SDNPHasChain, SDNPSideEffect]>;
def PPCvcmp : SDNode<"PPCISD::VCMP" , SDT_PPCvcmp, []>;
def PPCvcmp_o : SDNode<"PPCISD::VCMPo", SDT_PPCvcmp, [SDNPOutGlue]>;
def PPCcondbranch : SDNode<"PPCISD::COND_BRANCH", SDT_PPCcondbr,
[SDNPHasChain, SDNPOptInGlue]>;
def PPClbrx : SDNode<"PPCISD::LBRX", SDT_PPClbrx,
[SDNPHasChain, SDNPMayLoad]>;
def PPCstbrx : SDNode<"PPCISD::STBRX", SDT_PPCstbrx,
[SDNPHasChain, SDNPMayStore]>;
// Instructions to set/unset CR bit 6 for SVR4 vararg calls
def PPCcr6set : SDNode<"PPCISD::CR6SET", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
def PPCcr6unset : SDNode<"PPCISD::CR6UNSET", SDTNone,
[SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
// Instructions to support atomic operations
def PPClarx : SDNode<"PPCISD::LARX", SDT_PPClarx,
[SDNPHasChain, SDNPMayLoad]>;
def PPCstcx : SDNode<"PPCISD::STCX", SDT_PPCstcx,
[SDNPHasChain, SDNPMayStore]>;
// Instructions to support medium and large code model
This patch implements medium code model support for 64-bit PowerPC. The default for 64-bit PowerPC is small code model, in which TOC entries must be addressable using a 16-bit offset from the TOC pointer. Additionally, only TOC entries are addressed via the TOC pointer. With medium code model, TOC entries and data sections can all be addressed via the TOC pointer using a 32-bit offset. Cooperation with the linker allows 16-bit offsets to be used when these are sufficient, reducing the number of extra instructions that need to be executed. Medium code model also does not generate explicit TOC entries in ".section toc" for variables that are wholly internal to the compilation unit. Consider a load of an external 4-byte integer. With small code model, the compiler generates: ld 3, .LC1@toc(2) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc ei[TC],ei With medium model, it instead generates: addis 3, 2, .LC1@toc@ha ld 3, .LC1@toc@l(3) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc ei[TC],ei Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the 32-bit offset of ei's TOC entry from the TOC base pointer. Similarly, .LC1@toc@l is a relocation requesting the lower 16 bits. Note that if the linker determines that ei's TOC entry is within a 16-bit offset of the TOC base pointer, it will replace the "addis" with a "nop", and replace the "ld" with the identical "ld" instruction from the small code model example. Consider next a load of a function-scope static integer. For small code model, the compiler generates: ld 3, .LC1@toc(2) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc test_fn_static.si[TC],test_fn_static.si .type test_fn_static.si,@object .local test_fn_static.si .comm test_fn_static.si,4,4 For medium code model, the compiler generates: addis 3, 2, test_fn_static.si@toc@ha addi 3, 3, test_fn_static.si@toc@l lwz 4, 0(3) .type test_fn_static.si,@object .local test_fn_static.si .comm test_fn_static.si,4,4 Again, the linker may replace the "addis" with a "nop", calculating only a 16-bit offset when this is sufficient. Note that it would be more efficient for the compiler to generate: addis 3, 2, test_fn_static.si@toc@ha lwz 4, test_fn_static.si@toc@l(3) The current patch does not perform this optimization yet. This will be addressed as a peephole optimization in a later patch. For the moment, the default code model for 64-bit PowerPC will remain the small code model. We plan to eventually change the default to medium code model, which matches current upstream GCC behavior. Note that the different code models are ABI-compatible, so code compiled with different models will be linked and execute correctly. I've tested the regression suite and the application/benchmark test suite in two ways: Once with the patch as submitted here, and once with additional logic to force medium code model as the default. The tests all compile cleanly, with one exception. The mandel-2 application test fails due to an unrelated ABI compatibility with passing complex numbers. It just so happens that small code model was incredibly lucky, in that temporary values in floating-point registers held the expected values needed by the external library routine that was called incorrectly. My current thought is to correct the ABI problems with _Complex before making medium code model the default, to avoid introducing this "regression." Here are a few comments on how the patch works, since the selection code can be difficult to follow: The existing logic for small code model defines three pseudo-instructions: LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for constant pool addresses. These are expanded by SelectCodeCommon(). The pseudo-instruction approach doesn't work for medium code model, because we need to generate two instructions when we match the same pattern. Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY node for medium code model, and generates an ADDIStocHA followed by either a LDtocL or an ADDItocL. These new node types correspond naturally to the sequences described above. The addis/ld sequence is generated for the following cases: * Jump table addresses * Function addresses * External global variables * Tentative definitions of global variables (common linkage) The addis/addi sequence is generated for the following cases: * Constant pool entries * File-scope static global variables * Function-scope static variables Expanding to the two-instruction sequences at select time exposes the instructions to subsequent optimization, particularly scheduling. The rest of the processing occurs at assembly time, in PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to a "real" PowerPC instruction. When a TOC entry needs to be created, this is done here in the same manner as for the existing LDtoc, LDtocJTI, and LDtocCPT pseudo-instructions (I factored out a new routine to handle this). I had originally thought that if a TOC entry was needed for LDtocL or ADDItocL, it would already have been generated for the previous ADDIStocHA. However, at higher optimization levels, the ADDIStocHA may appear in a different block, which may be assembled textually following the block containing the LDtocL or ADDItocL. So it is necessary to include the possibility of creating a new TOC entry for those two instructions. Note that for LDtocL, we generate a new form of LD called LDrs. This allows specifying the @toc@l relocation for the offset field of the LD instruction (i.e., the offset is replaced by a SymbolLo relocation). When the peephole optimization described above is added, we will need to do similar things for all immediate-form load and store operations. The seven "mcm-n.ll" test cases are kept separate because otherwise the intermingling of various TOC entries and so forth makes the tests fragile and hard to understand. The above assumes use of an external assembler. For use of the integrated assembler, new relocations are added and used by PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for proper generation of the various relocations for the same sequences tested with the external assembler. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 17:35:46 +00:00
def PPCaddisTocHA : SDNode<"PPCISD::ADDIS_TOC_HA", SDTIntBinOp, []>;
def PPCldTocL : SDNode<"PPCISD::LD_TOC_L", SDTIntBinOp, [SDNPMayLoad]>;
def PPCaddiTocL : SDNode<"PPCISD::ADDI_TOC_L", SDTIntBinOp, []>;
// Instructions to support dynamic alloca.
def SDTDynOp : SDTypeProfile<1, 2, []>;
def PPCdynalloc : SDNode<"PPCISD::DYNALLOC", SDTDynOp, [SDNPHasChain]>;
//===----------------------------------------------------------------------===//
// PowerPC specific transformation functions and pattern fragments.
//
def SHL32 : SDNodeXForm<imm, [{
// Transformation function: 31 - imm
return getI32Imm(31 - N->getZExtValue());
}]>;
def SRL32 : SDNodeXForm<imm, [{
// Transformation function: 32 - imm
return N->getZExtValue() ? getI32Imm(32 - N->getZExtValue()) : getI32Imm(0);
}]>;
def LO16 : SDNodeXForm<imm, [{
// Transformation function: get the low 16 bits.
return getI32Imm((unsigned short)N->getZExtValue());
}]>;
def HI16 : SDNodeXForm<imm, [{
// Transformation function: shift the immediate value down into the low bits.
return getI32Imm((unsigned)N->getZExtValue() >> 16);
}]>;
def HA16 : SDNodeXForm<imm, [{
// Transformation function: shift the immediate value down into the low bits.
signed int Val = N->getZExtValue();
return getI32Imm((Val - (signed short)Val) >> 16);
}]>;
def MB : SDNodeXForm<imm, [{
// Transformation function: get the start bit of a mask
unsigned mb = 0, me;
(void)isRunOfOnes((unsigned)N->getZExtValue(), mb, me);
return getI32Imm(mb);
}]>;
def ME : SDNodeXForm<imm, [{
// Transformation function: get the end bit of a mask
unsigned mb, me = 0;
(void)isRunOfOnes((unsigned)N->getZExtValue(), mb, me);
return getI32Imm(me);
}]>;
def maskimm32 : PatLeaf<(imm), [{
// maskImm predicate - True if immediate is a run of ones.
unsigned mb, me;
if (N->getValueType(0) == MVT::i32)
return isRunOfOnes((unsigned)N->getZExtValue(), mb, me);
else
return false;
}]>;
def imm32SExt16 : Operand<i32>, ImmLeaf<i32, [{
// imm32SExt16 predicate - True if the i32 immediate fits in a 16-bit
// sign extended field. Used by instructions like 'addi'.
return (int32_t)Imm == (short)Imm;
}]>;
def imm64SExt16 : Operand<i64>, ImmLeaf<i64, [{
// imm64SExt16 predicate - True if the i64 immediate fits in a 16-bit
// sign extended field. Used by instructions like 'addi'.
return (int64_t)Imm == (short)Imm;
}]>;
def immZExt16 : PatLeaf<(imm), [{
// immZExt16 predicate - True if the immediate fits in a 16-bit zero extended
// field. Used by instructions like 'ori'.
return (uint64_t)N->getZExtValue() == (unsigned short)N->getZExtValue();
}], LO16>;
// imm16Shifted* - These match immediates where the low 16-bits are zero. There
// are two forms: imm16ShiftedSExt and imm16ShiftedZExt. These two forms are
// identical in 32-bit mode, but in 64-bit mode, they return true if the
// immediate fits into a sign/zero extended 32-bit immediate (with the low bits
// clear).
def imm16ShiftedZExt : PatLeaf<(imm), [{
// imm16ShiftedZExt predicate - True if only bits in the top 16-bits of the
// immediate are set. Used by instructions like 'xoris'.
return (N->getZExtValue() & ~uint64_t(0xFFFF0000)) == 0;
}], HI16>;
def imm16ShiftedSExt : PatLeaf<(imm), [{
// imm16ShiftedSExt predicate - True if only bits in the top 16-bits of the
// immediate are set. Used by instructions like 'addis'. Identical to
// imm16ShiftedZExt in 32-bit mode.
if (N->getZExtValue() & 0xFFFF) return false;
if (N->getValueType(0) == MVT::i32)
return true;
// For 64-bit, make sure it is sext right.
return N->getZExtValue() == (uint64_t)(int)N->getZExtValue();
}], HI16>;
// Some r+i load/store instructions (such as LD, STD, LDU, etc.) that require
[PowerPC] Use true offset value in "memrix" machine operands This is the second part of the change to always return "true" offset values from getPreIndexedAddressParts, tackling the case of "memrix" type operands. This is about instructions like LD/STD that only have a 14-bit field to encode immediate offsets, which are implicitly extended by two zero bits by the machine, so that in effect we can access 16-bit offsets as long as they are a multiple of 4. The PowerPC back end currently handles such instructions by carrying the 14-bit value (as it will get encoded into the actual machine instructions) in the machine operand fields for such instructions. This means that those values are in fact not the true offset, but rather the offset divided by 4 (and then truncated to an unsigned 14-bit value). Like in the case fixed in r182012, this makes common code operations on such offset values not work as expected. Furthermore, there doesn't really appear to be any strong reason why we should encode machine operands this way. This patch therefore changes the encoding of "memrix" type machine operands to simply contain the "true" offset value as a signed immediate value, while enforcing the rules that it must fit in a 16-bit signed value and must also be a multiple of 4. This change must be made simultaneously in all places that access machine operands of this type. However, just about all those changes make the code simpler; in many cases we can now just share the same code for memri and memrix operands. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182032 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 17:58:02 +00:00
// restricted memrix (4-aligned) constants are alignment sensitive. If these
// offsets are hidden behind TOC entries than the values of the lower-order
// bits cannot be checked directly. As a result, we need to also incorporate
// an alignment check into the relevant patterns.
def aligned4load : PatFrag<(ops node:$ptr), (load node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() >= 4;
}]>;
def aligned4store : PatFrag<(ops node:$val, node:$ptr),
(store node:$val, node:$ptr), [{
return cast<StoreSDNode>(N)->getAlignment() >= 4;
}]>;
def aligned4sextloadi32 : PatFrag<(ops node:$ptr), (sextloadi32 node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() >= 4;
}]>;
def aligned4pre_store : PatFrag<
(ops node:$val, node:$base, node:$offset),
(pre_store node:$val, node:$base, node:$offset), [{
return cast<StoreSDNode>(N)->getAlignment() >= 4;
}]>;
def unaligned4load : PatFrag<(ops node:$ptr), (load node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() < 4;
}]>;
def unaligned4store : PatFrag<(ops node:$val, node:$ptr),
(store node:$val, node:$ptr), [{
return cast<StoreSDNode>(N)->getAlignment() < 4;
}]>;
def unaligned4sextloadi32 : PatFrag<(ops node:$ptr), (sextloadi32 node:$ptr), [{
return cast<LoadSDNode>(N)->getAlignment() < 4;
}]>;
//===----------------------------------------------------------------------===//
// PowerPC Flag Definitions.
class isPPC64 { bit PPC64 = 1; }
class isDOT { bit RC = 1; }
class RegConstraint<string C> {
string Constraints = C;
}
class NoEncode<string E> {
string DisableEncoding = E;
}
//===----------------------------------------------------------------------===//
// PowerPC Operand Definitions.
// In the default PowerPC assembler syntax, registers are specified simply
// by number, so they cannot be distinguished from immediate values (without
// looking at the opcode). This means that the default operand matching logic
// for the asm parser does not work, and we need to specify custom matchers.
// Since those can only be specified with RegisterOperand classes and not
// directly on the RegisterClass, all instructions patterns used by the asm
// parser need to use a RegisterOperand (instead of a RegisterClass) for
// all their register operands.
// For this purpose, we define one RegisterOperand for each RegisterClass,
// using the same name as the class, just in lower case.
def PPCRegGPRCAsmOperand : AsmOperandClass {
let Name = "RegGPRC"; let PredicateMethod = "isRegNumber";
}
def gprc : RegisterOperand<GPRC> {
let ParserMatchClass = PPCRegGPRCAsmOperand;
}
def PPCRegG8RCAsmOperand : AsmOperandClass {
let Name = "RegG8RC"; let PredicateMethod = "isRegNumber";
}
def g8rc : RegisterOperand<G8RC> {
let ParserMatchClass = PPCRegG8RCAsmOperand;
}
def PPCRegGPRCNoR0AsmOperand : AsmOperandClass {
let Name = "RegGPRCNoR0"; let PredicateMethod = "isRegNumber";
}
def gprc_nor0 : RegisterOperand<GPRC_NOR0> {
let ParserMatchClass = PPCRegGPRCNoR0AsmOperand;
}
def PPCRegG8RCNoX0AsmOperand : AsmOperandClass {
let Name = "RegG8RCNoX0"; let PredicateMethod = "isRegNumber";
}
def g8rc_nox0 : RegisterOperand<G8RC_NOX0> {
let ParserMatchClass = PPCRegG8RCNoX0AsmOperand;
}
def PPCRegF8RCAsmOperand : AsmOperandClass {
let Name = "RegF8RC"; let PredicateMethod = "isRegNumber";
}
def f8rc : RegisterOperand<F8RC> {
let ParserMatchClass = PPCRegF8RCAsmOperand;
}
def PPCRegF4RCAsmOperand : AsmOperandClass {
let Name = "RegF4RC"; let PredicateMethod = "isRegNumber";
}
def f4rc : RegisterOperand<F4RC> {
let ParserMatchClass = PPCRegF4RCAsmOperand;
}
def PPCRegVRRCAsmOperand : AsmOperandClass {
let Name = "RegVRRC"; let PredicateMethod = "isRegNumber";
}
def vrrc : RegisterOperand<VRRC> {
let ParserMatchClass = PPCRegVRRCAsmOperand;
}
def PPCRegCRBITRCAsmOperand : AsmOperandClass {
let Name = "RegCRBITRC"; let PredicateMethod = "isCRBitNumber";
}
def crbitrc : RegisterOperand<CRBITRC> {
let ParserMatchClass = PPCRegCRBITRCAsmOperand;
}
def PPCRegCRRCAsmOperand : AsmOperandClass {
let Name = "RegCRRC"; let PredicateMethod = "isCCRegNumber";
}
def crrc : RegisterOperand<CRRC> {
let ParserMatchClass = PPCRegCRRCAsmOperand;
}
def PPCS5ImmAsmOperand : AsmOperandClass {
let Name = "S5Imm"; let PredicateMethod = "isS5Imm";
let RenderMethod = "addImmOperands";
}
def s5imm : Operand<i32> {
let PrintMethod = "printS5ImmOperand";
let ParserMatchClass = PPCS5ImmAsmOperand;
}
def PPCU5ImmAsmOperand : AsmOperandClass {
let Name = "U5Imm"; let PredicateMethod = "isU5Imm";
let RenderMethod = "addImmOperands";
}
def u5imm : Operand<i32> {
let PrintMethod = "printU5ImmOperand";
let ParserMatchClass = PPCU5ImmAsmOperand;
}
def PPCU6ImmAsmOperand : AsmOperandClass {
let Name = "U6Imm"; let PredicateMethod = "isU6Imm";
let RenderMethod = "addImmOperands";
}
def u6imm : Operand<i32> {
let PrintMethod = "printU6ImmOperand";
let ParserMatchClass = PPCU6ImmAsmOperand;
}
def PPCS16ImmAsmOperand : AsmOperandClass {
let Name = "S16Imm"; let PredicateMethod = "isS16Imm";
let RenderMethod = "addImmOperands";
}
def s16imm : Operand<i32> {
let PrintMethod = "printS16ImmOperand";
let EncoderMethod = "getImm16Encoding";
let ParserMatchClass = PPCS16ImmAsmOperand;
}
def PPCU16ImmAsmOperand : AsmOperandClass {
let Name = "U16Imm"; let PredicateMethod = "isU16Imm";
let RenderMethod = "addImmOperands";
}
def u16imm : Operand<i32> {
let PrintMethod = "printU16ImmOperand";
let EncoderMethod = "getImm16Encoding";
let ParserMatchClass = PPCU16ImmAsmOperand;
}
def PPCS17ImmAsmOperand : AsmOperandClass {
let Name = "S17Imm"; let PredicateMethod = "isS17Imm";
let RenderMethod = "addImmOperands";
}
def s17imm : Operand<i32> {
// This operand type is used for addis/lis to allow the assembler parser
// to accept immediates in the range -65536..65535 for compatibility with
// the GNU assembler. The operand is treated as 16-bit otherwise.
let PrintMethod = "printS16ImmOperand";
let EncoderMethod = "getImm16Encoding";
let ParserMatchClass = PPCS17ImmAsmOperand;
}
def PPCDirectBrAsmOperand : AsmOperandClass {
let Name = "DirectBr"; let PredicateMethod = "isDirectBr";
let RenderMethod = "addBranchTargetOperands";
}
def directbrtarget : Operand<OtherVT> {
let PrintMethod = "printBranchOperand";
let EncoderMethod = "getDirectBrEncoding";
let ParserMatchClass = PPCDirectBrAsmOperand;
}
def absdirectbrtarget : Operand<OtherVT> {
let PrintMethod = "printAbsBranchOperand";
let EncoderMethod = "getAbsDirectBrEncoding";
let ParserMatchClass = PPCDirectBrAsmOperand;
}
def PPCCondBrAsmOperand : AsmOperandClass {
let Name = "CondBr"; let PredicateMethod = "isCondBr";
let RenderMethod = "addBranchTargetOperands";
}
def condbrtarget : Operand<OtherVT> {
let PrintMethod = "printBranchOperand";
let EncoderMethod = "getCondBrEncoding";
let ParserMatchClass = PPCCondBrAsmOperand;
}
def abscondbrtarget : Operand<OtherVT> {
let PrintMethod = "printAbsBranchOperand";
let EncoderMethod = "getAbsCondBrEncoding";
let ParserMatchClass = PPCCondBrAsmOperand;
}
def calltarget : Operand<iPTR> {
let PrintMethod = "printBranchOperand";
let EncoderMethod = "getDirectBrEncoding";
let ParserMatchClass = PPCDirectBrAsmOperand;
}
def abscalltarget : Operand<iPTR> {
let PrintMethod = "printAbsBranchOperand";
let EncoderMethod = "getAbsDirectBrEncoding";
let ParserMatchClass = PPCDirectBrAsmOperand;
}
def PPCCRBitMaskOperand : AsmOperandClass {
let Name = "CRBitMask"; let PredicateMethod = "isCRBitMask";
}
def crbitm: Operand<i8> {
let PrintMethod = "printcrbitm";
let EncoderMethod = "get_crbitm_encoding";
let ParserMatchClass = PPCCRBitMaskOperand;
}
// Address operands
// A version of ptr_rc which excludes R0 (or X0 in 64-bit mode).
def PPCRegGxRCNoR0Operand : AsmOperandClass {
let Name = "RegGxRCNoR0"; let PredicateMethod = "isRegNumber";
}
def ptr_rc_nor0 : Operand<iPTR>, PointerLikeRegClass<1> {
let ParserMatchClass = PPCRegGxRCNoR0Operand;
}
// A version of ptr_rc usable with the asm parser.
def PPCRegGxRCOperand : AsmOperandClass {
let Name = "RegGxRC"; let PredicateMethod = "isRegNumber";
}
def ptr_rc_idx : Operand<iPTR>, PointerLikeRegClass<0> {
let ParserMatchClass = PPCRegGxRCOperand;
}
def PPCDispRIOperand : AsmOperandClass {
let Name = "DispRI"; let PredicateMethod = "isS16Imm";
[PowerPC] Use true offset value in "memrix" machine operands This is the second part of the change to always return "true" offset values from getPreIndexedAddressParts, tackling the case of "memrix" type operands. This is about instructions like LD/STD that only have a 14-bit field to encode immediate offsets, which are implicitly extended by two zero bits by the machine, so that in effect we can access 16-bit offsets as long as they are a multiple of 4. The PowerPC back end currently handles such instructions by carrying the 14-bit value (as it will get encoded into the actual machine instructions) in the machine operand fields for such instructions. This means that those values are in fact not the true offset, but rather the offset divided by 4 (and then truncated to an unsigned 14-bit value). Like in the case fixed in r182012, this makes common code operations on such offset values not work as expected. Furthermore, there doesn't really appear to be any strong reason why we should encode machine operands this way. This patch therefore changes the encoding of "memrix" type machine operands to simply contain the "true" offset value as a signed immediate value, while enforcing the rules that it must fit in a 16-bit signed value and must also be a multiple of 4. This change must be made simultaneously in all places that access machine operands of this type. However, just about all those changes make the code simpler; in many cases we can now just share the same code for memri and memrix operands. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182032 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 17:58:02 +00:00
let RenderMethod = "addImmOperands";
}
def dispRI : Operand<iPTR> {
let ParserMatchClass = PPCDispRIOperand;
}
def PPCDispRIXOperand : AsmOperandClass {
let Name = "DispRIX"; let PredicateMethod = "isS16ImmX4";
[PowerPC] Use true offset value in "memrix" machine operands This is the second part of the change to always return "true" offset values from getPreIndexedAddressParts, tackling the case of "memrix" type operands. This is about instructions like LD/STD that only have a 14-bit field to encode immediate offsets, which are implicitly extended by two zero bits by the machine, so that in effect we can access 16-bit offsets as long as they are a multiple of 4. The PowerPC back end currently handles such instructions by carrying the 14-bit value (as it will get encoded into the actual machine instructions) in the machine operand fields for such instructions. This means that those values are in fact not the true offset, but rather the offset divided by 4 (and then truncated to an unsigned 14-bit value). Like in the case fixed in r182012, this makes common code operations on such offset values not work as expected. Furthermore, there doesn't really appear to be any strong reason why we should encode machine operands this way. This patch therefore changes the encoding of "memrix" type machine operands to simply contain the "true" offset value as a signed immediate value, while enforcing the rules that it must fit in a 16-bit signed value and must also be a multiple of 4. This change must be made simultaneously in all places that access machine operands of this type. However, just about all those changes make the code simpler; in many cases we can now just share the same code for memri and memrix operands. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182032 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 17:58:02 +00:00
let RenderMethod = "addImmOperands";
}
def dispRIX : Operand<iPTR> {
let ParserMatchClass = PPCDispRIXOperand;
}
def memri : Operand<iPTR> {
let PrintMethod = "printMemRegImm";
let MIOperandInfo = (ops dispRI:$imm, ptr_rc_nor0:$reg);
let EncoderMethod = "getMemRIEncoding";
}
def memrr : Operand<iPTR> {
let PrintMethod = "printMemRegReg";
let MIOperandInfo = (ops ptr_rc_nor0:$ptrreg, ptr_rc_idx:$offreg);
}
[PowerPC] Use true offset value in "memrix" machine operands This is the second part of the change to always return "true" offset values from getPreIndexedAddressParts, tackling the case of "memrix" type operands. This is about instructions like LD/STD that only have a 14-bit field to encode immediate offsets, which are implicitly extended by two zero bits by the machine, so that in effect we can access 16-bit offsets as long as they are a multiple of 4. The PowerPC back end currently handles such instructions by carrying the 14-bit value (as it will get encoded into the actual machine instructions) in the machine operand fields for such instructions. This means that those values are in fact not the true offset, but rather the offset divided by 4 (and then truncated to an unsigned 14-bit value). Like in the case fixed in r182012, this makes common code operations on such offset values not work as expected. Furthermore, there doesn't really appear to be any strong reason why we should encode machine operands this way. This patch therefore changes the encoding of "memrix" type machine operands to simply contain the "true" offset value as a signed immediate value, while enforcing the rules that it must fit in a 16-bit signed value and must also be a multiple of 4. This change must be made simultaneously in all places that access machine operands of this type. However, just about all those changes make the code simpler; in many cases we can now just share the same code for memri and memrix operands. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182032 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 17:58:02 +00:00
def memrix : Operand<iPTR> { // memri where the imm is 4-aligned.
let PrintMethod = "printMemRegImm";
let MIOperandInfo = (ops dispRIX:$imm, ptr_rc_nor0:$reg);
let EncoderMethod = "getMemRIXEncoding";
}
// A single-register address. This is used with the SjLj
// pseudo-instructions.
def memr : Operand<iPTR> {
let MIOperandInfo = (ops ptr_rc:$ptrreg);
}
// PowerPC Predicate operand.
def pred : Operand<OtherVT> {
let PrintMethod = "printPredicateOperand";
let MIOperandInfo = (ops i32imm:$bibo, crrc:$reg);
}
// Define PowerPC specific addressing mode.
def iaddr : ComplexPattern<iPTR, 2, "SelectAddrImm", [], []>;
def xaddr : ComplexPattern<iPTR, 2, "SelectAddrIdx", [], []>;
def xoaddr : ComplexPattern<iPTR, 2, "SelectAddrIdxOnly",[], []>;
[PowerPC] Use true offset value in "memrix" machine operands This is the second part of the change to always return "true" offset values from getPreIndexedAddressParts, tackling the case of "memrix" type operands. This is about instructions like LD/STD that only have a 14-bit field to encode immediate offsets, which are implicitly extended by two zero bits by the machine, so that in effect we can access 16-bit offsets as long as they are a multiple of 4. The PowerPC back end currently handles such instructions by carrying the 14-bit value (as it will get encoded into the actual machine instructions) in the machine operand fields for such instructions. This means that those values are in fact not the true offset, but rather the offset divided by 4 (and then truncated to an unsigned 14-bit value). Like in the case fixed in r182012, this makes common code operations on such offset values not work as expected. Furthermore, there doesn't really appear to be any strong reason why we should encode machine operands this way. This patch therefore changes the encoding of "memrix" type machine operands to simply contain the "true" offset value as a signed immediate value, while enforcing the rules that it must fit in a 16-bit signed value and must also be a multiple of 4. This change must be made simultaneously in all places that access machine operands of this type. However, just about all those changes make the code simpler; in many cases we can now just share the same code for memri and memrix operands. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182032 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 17:58:02 +00:00
def ixaddr : ComplexPattern<iPTR, 2, "SelectAddrImmX4", [], []>; // "std"
// The address in a single register. This is used with the SjLj
// pseudo-instructions.
def addr : ComplexPattern<iPTR, 1, "SelectAddr",[], []>;
/// This is just the offset part of iaddr, used for preinc.
def iaddroff : ComplexPattern<iPTR, 1, "SelectAddrImmOffs", [], []>;
//===----------------------------------------------------------------------===//
// PowerPC Instruction Predicate Definitions.
def In32BitMode : Predicate<"!PPCSubTarget.isPPC64()">;
def In64BitMode : Predicate<"PPCSubTarget.isPPC64()">;
def IsBookE : Predicate<"PPCSubTarget.isBookE()">;
//===----------------------------------------------------------------------===//
// PowerPC Multiclass Definitions.
multiclass XForm_6r<bits<6> opcode, bits<10> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XForm_6<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : XForm_6<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XForm_6rc<bits<6> opcode, bits<10> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
let Defs = [CARRY] in
def NAME : XForm_6<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CARRY, CR0] in
def o : XForm_6<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XForm_10r<bits<6> opcode, bits<10> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XForm_10<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : XForm_10<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XForm_10rc<bits<6> opcode, bits<10> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
let Defs = [CARRY] in
def NAME : XForm_10<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CARRY, CR0] in
def o : XForm_10<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XForm_11r<bits<6> opcode, bits<10> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XForm_11<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : XForm_11<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XOForm_1r<bits<6> opcode, bits<9> xo, bit oe, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XOForm_1<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : XOForm_1<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XOForm_1rc<bits<6> opcode, bits<9> xo, bit oe, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
let Defs = [CARRY] in
def NAME : XOForm_1<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CARRY, CR0] in
def o : XOForm_1<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XOForm_3r<bits<6> opcode, bits<9> xo, bit oe, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XOForm_3<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : XOForm_3<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XOForm_3rc<bits<6> opcode, bits<9> xo, bit oe, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
let Defs = [CARRY] in
def NAME : XOForm_3<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CARRY, CR0] in
def o : XOForm_3<opcode, xo, oe, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass MForm_2r<bits<6> opcode, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : MForm_2<opcode, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : MForm_2<opcode, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass MDForm_1r<bits<6> opcode, bits<3> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : MDForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : MDForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass MDSForm_1r<bits<6> opcode, bits<4> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : MDSForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR0] in
def o : MDSForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XSForm_1rc<bits<6> opcode, bits<9> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
let Defs = [CARRY] in
def NAME : XSForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CARRY, CR0] in
def o : XSForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass XForm_26r<bits<6> opcode, bits<10> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XForm_26<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR1] in
def o : XForm_26<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass AForm_1r<bits<6> opcode, bits<5> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : AForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR1] in
def o : AForm_1<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass AForm_2r<bits<6> opcode, bits<5> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : AForm_2<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR1] in
def o : AForm_2<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
multiclass AForm_3r<bits<6> opcode, bits<5> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : AForm_3<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>, RecFormRel;
let Defs = [CR1] in
def o : AForm_3<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT, RecFormRel;
}
}
//===----------------------------------------------------------------------===//
// PowerPC Instruction Definitions.
// Pseudo-instructions:
let hasCtrlDep = 1 in {
let Defs = [R1], Uses = [R1] in {
def ADJCALLSTACKDOWN : Pseudo<(outs), (ins u16imm:$amt), "#ADJCALLSTACKDOWN $amt",
[(callseq_start timm:$amt)]>;
def ADJCALLSTACKUP : Pseudo<(outs), (ins u16imm:$amt1, u16imm:$amt2), "#ADJCALLSTACKUP $amt1 $amt2",
[(callseq_end timm:$amt1, timm:$amt2)]>;
}
def UPDATE_VRSAVE : Pseudo<(outs gprc:$rD), (ins gprc:$rS),
"UPDATE_VRSAVE $rD, $rS", []>;
}
let Defs = [R1], Uses = [R1] in
def DYNALLOC : Pseudo<(outs gprc:$result), (ins gprc:$negsize, memri:$fpsi), "#DYNALLOC",
[(set i32:$result,
(PPCdynalloc i32:$negsize, iaddr:$fpsi))]>;
// SELECT_CC_* - Used to implement the SELECT_CC DAG operation. Expanded after
// instruction selection into a branch sequence.
let usesCustomInserter = 1, // Expanded after instruction selection.
PPC970_Single = 1 in {
// Note that SELECT_CC_I4 and SELECT_CC_I8 use the no-r0 register classes
// because either operand might become the first operand in an isel, and
// that operand cannot be r0.
def SELECT_CC_I4 : Pseudo<(outs gprc:$dst), (ins crrc:$cond,
gprc_nor0:$T, gprc_nor0:$F,
i32imm:$BROPC), "#SELECT_CC_I4",
[]>;
def SELECT_CC_I8 : Pseudo<(outs g8rc:$dst), (ins crrc:$cond,
g8rc_nox0:$T, g8rc_nox0:$F,
i32imm:$BROPC), "#SELECT_CC_I8",
[]>;
def SELECT_CC_F4 : Pseudo<(outs f4rc:$dst), (ins crrc:$cond, f4rc:$T, f4rc:$F,
i32imm:$BROPC), "#SELECT_CC_F4",
[]>;
def SELECT_CC_F8 : Pseudo<(outs f8rc:$dst), (ins crrc:$cond, f8rc:$T, f8rc:$F,
i32imm:$BROPC), "#SELECT_CC_F8",
[]>;
def SELECT_CC_VRRC: Pseudo<(outs vrrc:$dst), (ins crrc:$cond, vrrc:$T, vrrc:$F,
i32imm:$BROPC), "#SELECT_CC_VRRC",
[]>;
}
// SPILL_CR - Indicate that we're dumping the CR register, so we'll need to
// scavenge a register for it.
let mayStore = 1 in
def SPILL_CR : Pseudo<(outs), (ins crrc:$cond, memri:$F),
"#SPILL_CR", []>;
// RESTORE_CR - Indicate that we're restoring the CR register (previously
// spilled), so we'll need to scavenge a register for it.
let mayLoad = 1 in
def RESTORE_CR : Pseudo<(outs crrc:$cond), (ins memri:$F),
"#RESTORE_CR", []>;
let isTerminator = 1, isBarrier = 1, PPC970_Unit = 7 in {
let isReturn = 1, Uses = [LR, RM] in
def BLR : XLForm_2_ext<19, 16, 20, 0, 0, (outs), (ins), "blr", BrB,
[(retflag)]>;
let isBranch = 1, isIndirectBranch = 1, Uses = [CTR] in {
def BCTR : XLForm_2_ext<19, 528, 20, 0, 0, (outs), (ins), "bctr", BrB, []>;
let isCodeGenOnly = 1 in
def BCCTR : XLForm_2_br<19, 528, 0, (outs), (ins pred:$cond),
"b${cond:cc}ctr${cond:pm} ${cond:reg}", BrB, []>;
}
}
let Defs = [LR] in
def MovePCtoLR : Pseudo<(outs), (ins), "#MovePCtoLR", []>,
PPC970_Unit_BRU;
let isBranch = 1, isTerminator = 1, hasCtrlDep = 1, PPC970_Unit = 7 in {
let isBarrier = 1 in {
def B : IForm<18, 0, 0, (outs), (ins directbrtarget:$dst),
"b $dst", BrB,
[(br bb:$dst)]>;
def BA : IForm<18, 1, 0, (outs), (ins absdirectbrtarget:$dst),
"ba $dst", BrB, []>;
}
// BCC represents an arbitrary conditional branch on a predicate.
// FIXME: should be able to write a pattern for PPCcondbranch, but can't use
// a two-value operand where a dag node expects two operands. :(
let isCodeGenOnly = 1 in {
def BCC : BForm<16, 0, 0, (outs), (ins pred:$cond, condbrtarget:$dst),
"b${cond:cc}${cond:pm} ${cond:reg}, $dst"
/*[(PPCcondbranch crrc:$crS, imm:$opc, bb:$dst)]*/>;
def BCCA : BForm<16, 1, 0, (outs), (ins pred:$cond, abscondbrtarget:$dst),
"b${cond:cc}a${cond:pm} ${cond:reg}, $dst">;
let isReturn = 1, Uses = [LR, RM] in
def BCLR : XLForm_2_br<19, 16, 0, (outs), (ins pred:$cond),
"b${cond:cc}lr${cond:pm} ${cond:reg}", BrB, []>;
}
let isReturn = 1, Defs = [CTR], Uses = [CTR, LR, RM] in {
def BDZLR : XLForm_2_ext<19, 16, 18, 0, 0, (outs), (ins),
"bdzlr", BrB, []>;
def BDNZLR : XLForm_2_ext<19, 16, 16, 0, 0, (outs), (ins),
"bdnzlr", BrB, []>;
def BDZLRp : XLForm_2_ext<19, 16, 27, 0, 0, (outs), (ins),
"bdzlr+", BrB, []>;
def BDNZLRp: XLForm_2_ext<19, 16, 25, 0, 0, (outs), (ins),
"bdnzlr+", BrB, []>;
def BDZLRm : XLForm_2_ext<19, 16, 26, 0, 0, (outs), (ins),
"bdzlr-", BrB, []>;
def BDNZLRm: XLForm_2_ext<19, 16, 24, 0, 0, (outs), (ins),
"bdnzlr-", BrB, []>;
}
let Defs = [CTR], Uses = [CTR] in {
def BDZ : BForm_1<16, 18, 0, 0, (outs), (ins condbrtarget:$dst),
"bdz $dst">;
def BDNZ : BForm_1<16, 16, 0, 0, (outs), (ins condbrtarget:$dst),
"bdnz $dst">;
def BDZA : BForm_1<16, 18, 1, 0, (outs), (ins abscondbrtarget:$dst),
"bdza $dst">;
def BDNZA : BForm_1<16, 16, 1, 0, (outs), (ins abscondbrtarget:$dst),
"bdnza $dst">;
def BDZp : BForm_1<16, 27, 0, 0, (outs), (ins condbrtarget:$dst),
"bdz+ $dst">;
def BDNZp: BForm_1<16, 25, 0, 0, (outs), (ins condbrtarget:$dst),
"bdnz+ $dst">;
def BDZAp : BForm_1<16, 27, 1, 0, (outs), (ins abscondbrtarget:$dst),
"bdza+ $dst">;
def BDNZAp: BForm_1<16, 25, 1, 0, (outs), (ins abscondbrtarget:$dst),
"bdnza+ $dst">;
def BDZm : BForm_1<16, 26, 0, 0, (outs), (ins condbrtarget:$dst),
"bdz- $dst">;
def BDNZm: BForm_1<16, 24, 0, 0, (outs), (ins condbrtarget:$dst),
"bdnz- $dst">;
def BDZAm : BForm_1<16, 26, 1, 0, (outs), (ins abscondbrtarget:$dst),
"bdza- $dst">;
def BDNZAm: BForm_1<16, 24, 1, 0, (outs), (ins abscondbrtarget:$dst),
"bdnza- $dst">;
}
}
// The unconditional BCL used by the SjLj setjmp code.
let isCall = 1, hasCtrlDep = 1, isCodeGenOnly = 1, PPC970_Unit = 7 in {
let Defs = [LR], Uses = [RM] in {
def BCLalways : BForm_2<16, 20, 31, 0, 1, (outs), (ins condbrtarget:$dst),
"bcl 20, 31, $dst">;
}
}
let isCall = 1, PPC970_Unit = 7, Defs = [LR] in {
// Convenient aliases for call instructions
let Uses = [RM] in {
def BL : IForm<18, 0, 1, (outs), (ins calltarget:$func),
"bl $func", BrB, []>; // See Pat patterns below.
def BLA : IForm<18, 1, 1, (outs), (ins abscalltarget:$func),
"bla $func", BrB, [(PPCcall (i32 imm:$func))]>;
let isCodeGenOnly = 1 in {
def BCCL : BForm<16, 0, 1, (outs), (ins pred:$cond, condbrtarget:$dst),
"b${cond:cc}l${cond:pm} ${cond:reg}, $dst">;
def BCCLA : BForm<16, 1, 1, (outs), (ins pred:$cond, abscondbrtarget:$dst),
"b${cond:cc}la${cond:pm} ${cond:reg}, $dst">;
}
}
let Uses = [CTR, RM] in {
def BCTRL : XLForm_2_ext<19, 528, 20, 0, 1, (outs), (ins),
"bctrl", BrB, [(PPCbctrl)]>,
Requires<[In32BitMode]>;
let isCodeGenOnly = 1 in
def BCCTRL : XLForm_2_br<19, 528, 1, (outs), (ins pred:$cond),
"b${cond:cc}ctrl${cond:pm} ${cond:reg}", BrB, []>;
}
let Uses = [LR, RM] in {
def BLRL : XLForm_2_ext<19, 16, 20, 0, 1, (outs), (ins),
"blrl", BrB, []>;
let isCodeGenOnly = 1 in
def BCLRL : XLForm_2_br<19, 16, 1, (outs), (ins pred:$cond),
"b${cond:cc}lrl${cond:pm} ${cond:reg}", BrB, []>;
}
let Defs = [CTR], Uses = [CTR, RM] in {
def BDZL : BForm_1<16, 18, 0, 1, (outs), (ins condbrtarget:$dst),
"bdzl $dst">;
def BDNZL : BForm_1<16, 16, 0, 1, (outs), (ins condbrtarget:$dst),
"bdnzl $dst">;
def BDZLA : BForm_1<16, 18, 1, 1, (outs), (ins abscondbrtarget:$dst),
"bdzla $dst">;
def BDNZLA : BForm_1<16, 16, 1, 1, (outs), (ins abscondbrtarget:$dst),
"bdnzla $dst">;
def BDZLp : BForm_1<16, 27, 0, 1, (outs), (ins condbrtarget:$dst),
"bdzl+ $dst">;
def BDNZLp: BForm_1<16, 25, 0, 1, (outs), (ins condbrtarget:$dst),
"bdnzl+ $dst">;
def BDZLAp : BForm_1<16, 27, 1, 1, (outs), (ins abscondbrtarget:$dst),
"bdzla+ $dst">;
def BDNZLAp: BForm_1<16, 25, 1, 1, (outs), (ins abscondbrtarget:$dst),
"bdnzla+ $dst">;
def BDZLm : BForm_1<16, 26, 0, 1, (outs), (ins condbrtarget:$dst),
"bdzl- $dst">;
def BDNZLm: BForm_1<16, 24, 0, 1, (outs), (ins condbrtarget:$dst),
"bdnzl- $dst">;
def BDZLAm : BForm_1<16, 26, 1, 1, (outs), (ins abscondbrtarget:$dst),
"bdzla- $dst">;
def BDNZLAm: BForm_1<16, 24, 1, 1, (outs), (ins abscondbrtarget:$dst),
"bdnzla- $dst">;
}
let Defs = [CTR], Uses = [CTR, LR, RM] in {
def BDZLRL : XLForm_2_ext<19, 16, 18, 0, 1, (outs), (ins),
"bdzlrl", BrB, []>;
def BDNZLRL : XLForm_2_ext<19, 16, 16, 0, 1, (outs), (ins),
"bdnzlrl", BrB, []>;
def BDZLRLp : XLForm_2_ext<19, 16, 27, 0, 1, (outs), (ins),
"bdzlrl+", BrB, []>;
def BDNZLRLp: XLForm_2_ext<19, 16, 25, 0, 1, (outs), (ins),
"bdnzlrl+", BrB, []>;
def BDZLRLm : XLForm_2_ext<19, 16, 26, 0, 1, (outs), (ins),
"bdzlrl-", BrB, []>;
def BDNZLRLm: XLForm_2_ext<19, 16, 24, 0, 1, (outs), (ins),
"bdnzlrl-", BrB, []>;
}
}
let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, Uses = [RM] in
def TCRETURNdi :Pseudo< (outs),
(ins calltarget:$dst, i32imm:$offset),
"#TC_RETURNd $dst $offset",
[]>;
let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, Uses = [RM] in
def TCRETURNai :Pseudo<(outs), (ins abscalltarget:$func, i32imm:$offset),
"#TC_RETURNa $func $offset",
[(PPCtc_return (i32 imm:$func), imm:$offset)]>;
let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, Uses = [RM] in
def TCRETURNri : Pseudo<(outs), (ins CTRRC:$dst, i32imm:$offset),
"#TC_RETURNr $dst $offset",
[]>;
let isCodeGenOnly = 1 in {
let isTerminator = 1, isBarrier = 1, PPC970_Unit = 7, isBranch = 1,
isIndirectBranch = 1, isCall = 1, isReturn = 1, Uses = [CTR, RM] in
def TAILBCTR : XLForm_2_ext<19, 528, 20, 0, 0, (outs), (ins), "bctr", BrB, []>,
Requires<[In32BitMode]>;
let isBranch = 1, isTerminator = 1, hasCtrlDep = 1, PPC970_Unit = 7,
isBarrier = 1, isCall = 1, isReturn = 1, Uses = [RM] in
def TAILB : IForm<18, 0, 0, (outs), (ins calltarget:$dst),
"b $dst", BrB,
[]>;
let isBranch = 1, isTerminator = 1, hasCtrlDep = 1, PPC970_Unit = 7,
isBarrier = 1, isCall = 1, isReturn = 1, Uses = [RM] in
def TAILBA : IForm<18, 0, 0, (outs), (ins abscalltarget:$dst),
"ba $dst", BrB,
[]>;
}
let hasSideEffects = 1, isBarrier = 1, usesCustomInserter = 1 in {
let Defs = [CTR] in
def EH_SjLj_SetJmp32 : Pseudo<(outs gprc:$dst), (ins memr:$buf),
"#EH_SJLJ_SETJMP32",
[(set i32:$dst, (PPCeh_sjlj_setjmp addr:$buf))]>,
Requires<[In32BitMode]>;
let isTerminator = 1 in
def EH_SjLj_LongJmp32 : Pseudo<(outs), (ins memr:$buf),
"#EH_SJLJ_LONGJMP32",
[(PPCeh_sjlj_longjmp addr:$buf)]>,
Requires<[In32BitMode]>;
}
let isBranch = 1, isTerminator = 1 in {
def EH_SjLj_Setup : Pseudo<(outs), (ins directbrtarget:$dst),
"#EH_SjLj_Setup\t$dst", []>;
}
// System call.
let PPC970_Unit = 7 in {
def SC : SCForm<17, 1, (outs), (ins i32imm:$lev),
"sc $lev", BrB, [(PPCsc (i32 imm:$lev))]>;
}
// DCB* instructions.
def DCBA : DCB_Form<758, 0, (outs), (ins memrr:$dst),
"dcba $dst", LdStDCBF, [(int_ppc_dcba xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBF : DCB_Form<86, 0, (outs), (ins memrr:$dst),
"dcbf $dst", LdStDCBF, [(int_ppc_dcbf xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBI : DCB_Form<470, 0, (outs), (ins memrr:$dst),
"dcbi $dst", LdStDCBF, [(int_ppc_dcbi xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBST : DCB_Form<54, 0, (outs), (ins memrr:$dst),
"dcbst $dst", LdStDCBF, [(int_ppc_dcbst xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBT : DCB_Form<278, 0, (outs), (ins memrr:$dst),
"dcbt $dst", LdStDCBF, [(int_ppc_dcbt xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBTST : DCB_Form<246, 0, (outs), (ins memrr:$dst),
"dcbtst $dst", LdStDCBF, [(int_ppc_dcbtst xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBZ : DCB_Form<1014, 0, (outs), (ins memrr:$dst),
"dcbz $dst", LdStDCBF, [(int_ppc_dcbz xoaddr:$dst)]>,
PPC970_DGroup_Single;
def DCBZL : DCB_Form<1014, 1, (outs), (ins memrr:$dst),
"dcbzl $dst", LdStDCBF, [(int_ppc_dcbzl xoaddr:$dst)]>,
PPC970_DGroup_Single;
def : Pat<(prefetch xoaddr:$dst, (i32 0), imm, (i32 1)),
(DCBT xoaddr:$dst)>;
// Atomic operations
let usesCustomInserter = 1 in {
let Defs = [CR0] in {
def ATOMIC_LOAD_ADD_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_ADD_I8",
[(set i32:$dst, (atomic_load_add_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_SUB_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_SUB_I8",
[(set i32:$dst, (atomic_load_sub_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_AND_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_AND_I8",
[(set i32:$dst, (atomic_load_and_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_OR_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_OR_I8",
[(set i32:$dst, (atomic_load_or_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_XOR_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "ATOMIC_LOAD_XOR_I8",
[(set i32:$dst, (atomic_load_xor_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_NAND_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_NAND_I8",
[(set i32:$dst, (atomic_load_nand_8 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_ADD_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_ADD_I16",
[(set i32:$dst, (atomic_load_add_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_SUB_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_SUB_I16",
[(set i32:$dst, (atomic_load_sub_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_AND_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_AND_I16",
[(set i32:$dst, (atomic_load_and_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_OR_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_OR_I16",
[(set i32:$dst, (atomic_load_or_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_XOR_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_XOR_I16",
[(set i32:$dst, (atomic_load_xor_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_NAND_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_NAND_I16",
[(set i32:$dst, (atomic_load_nand_16 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_ADD_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_ADD_I32",
[(set i32:$dst, (atomic_load_add_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_SUB_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_SUB_I32",
[(set i32:$dst, (atomic_load_sub_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_AND_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_AND_I32",
[(set i32:$dst, (atomic_load_and_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_OR_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_OR_I32",
[(set i32:$dst, (atomic_load_or_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_XOR_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_XOR_I32",
[(set i32:$dst, (atomic_load_xor_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_LOAD_NAND_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$incr), "#ATOMIC_LOAD_NAND_I32",
[(set i32:$dst, (atomic_load_nand_32 xoaddr:$ptr, i32:$incr))]>;
def ATOMIC_CMP_SWAP_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$old, gprc:$new), "#ATOMIC_CMP_SWAP_I8",
[(set i32:$dst, (atomic_cmp_swap_8 xoaddr:$ptr, i32:$old, i32:$new))]>;
def ATOMIC_CMP_SWAP_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$old, gprc:$new), "#ATOMIC_CMP_SWAP_I16 $dst $ptr $old $new",
[(set i32:$dst, (atomic_cmp_swap_16 xoaddr:$ptr, i32:$old, i32:$new))]>;
def ATOMIC_CMP_SWAP_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$old, gprc:$new), "#ATOMIC_CMP_SWAP_I32 $dst $ptr $old $new",
[(set i32:$dst, (atomic_cmp_swap_32 xoaddr:$ptr, i32:$old, i32:$new))]>;
def ATOMIC_SWAP_I8 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$new), "#ATOMIC_SWAP_i8",
[(set i32:$dst, (atomic_swap_8 xoaddr:$ptr, i32:$new))]>;
def ATOMIC_SWAP_I16 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$new), "#ATOMIC_SWAP_I16",
[(set i32:$dst, (atomic_swap_16 xoaddr:$ptr, i32:$new))]>;
def ATOMIC_SWAP_I32 : Pseudo<
(outs gprc:$dst), (ins memrr:$ptr, gprc:$new), "#ATOMIC_SWAP_I32",
[(set i32:$dst, (atomic_swap_32 xoaddr:$ptr, i32:$new))]>;
}
}
// Instructions to support atomic operations
def LWARX : XForm_1<31, 20, (outs gprc:$rD), (ins memrr:$src),
"lwarx $rD, $src", LdStLWARX,
[(set i32:$rD, (PPClarx xoaddr:$src))]>;
let Defs = [CR0] in
def STWCX : XForm_1<31, 150, (outs), (ins gprc:$rS, memrr:$dst),
"stwcx. $rS, $dst", LdStSTWCX,
[(PPCstcx i32:$rS, xoaddr:$dst)]>,
isDOT;
let isTerminator = 1, isBarrier = 1, hasCtrlDep = 1 in
def TRAP : XForm_24<31, 4, (outs), (ins), "trap", LdStLoad, [(trap)]>;
def TWI : DForm_base<3, (outs), (ins u5imm:$to, gprc:$rA, s16imm:$imm),
"twi $to, $rA, $imm", IntTrapW, []>;
def TW : XForm_1<31, 4, (outs), (ins u5imm:$to, gprc:$rA, gprc:$rB),
"tw $to, $rA, $rB", IntTrapW, []>;
def TDI : DForm_base<2, (outs), (ins u5imm:$to, g8rc:$rA, s16imm:$imm),
"tdi $to, $rA, $imm", IntTrapD, []>;
def TD : XForm_1<31, 68, (outs), (ins u5imm:$to, g8rc:$rA, g8rc:$rB),
"td $to, $rA, $rB", IntTrapD, []>;
//===----------------------------------------------------------------------===//
// PPC32 Load Instructions.
//
// Unindexed (r+i) Loads.
let canFoldAsLoad = 1, PPC970_Unit = 2 in {
def LBZ : DForm_1<34, (outs gprc:$rD), (ins memri:$src),
"lbz $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi8 iaddr:$src))]>;
def LHA : DForm_1<42, (outs gprc:$rD), (ins memri:$src),
"lha $rD, $src", LdStLHA,
[(set i32:$rD, (sextloadi16 iaddr:$src))]>,
PPC970_DGroup_Cracked;
def LHZ : DForm_1<40, (outs gprc:$rD), (ins memri:$src),
"lhz $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi16 iaddr:$src))]>;
def LWZ : DForm_1<32, (outs gprc:$rD), (ins memri:$src),
"lwz $rD, $src", LdStLoad,
[(set i32:$rD, (load iaddr:$src))]>;
def LFS : DForm_1<48, (outs f4rc:$rD), (ins memri:$src),
"lfs $rD, $src", LdStLFD,
[(set f32:$rD, (load iaddr:$src))]>;
def LFD : DForm_1<50, (outs f8rc:$rD), (ins memri:$src),
"lfd $rD, $src", LdStLFD,
[(set f64:$rD, (load iaddr:$src))]>;
// Unindexed (r+i) Loads with Update (preinc).
let mayLoad = 1, neverHasSideEffects = 1 in {
def LBZU : DForm_1<35, (outs gprc:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lbzu $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LHAU : DForm_1<43, (outs gprc:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lhau $rD, $addr", LdStLHAU,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LHZU : DForm_1<41, (outs gprc:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lhzu $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LWZU : DForm_1<33, (outs gprc:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lwzu $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LFSU : DForm_1<49, (outs f4rc:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lfsu $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
def LFDU : DForm_1<51, (outs f8rc:$rD, ptr_rc_nor0:$ea_result), (ins memri:$addr),
"lfdu $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.reg = $ea_result">,
NoEncode<"$ea_result">;
// Indexed (r+r) Loads with Update (preinc).
def LBZUX : XForm_1<31, 119, (outs gprc:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lbzux $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LHAUX : XForm_1<31, 375, (outs gprc:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lhaux $rD, $addr", LdStLHAU,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LHZUX : XForm_1<31, 311, (outs gprc:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lhzux $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LWZUX : XForm_1<31, 55, (outs gprc:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lwzux $rD, $addr", LdStLoadUpd,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LFSUX : XForm_1<31, 567, (outs f4rc:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lfsux $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
def LFDUX : XForm_1<31, 631, (outs f8rc:$rD, ptr_rc_nor0:$ea_result),
(ins memrr:$addr),
"lfdux $rD, $addr", LdStLFDU,
[]>, RegConstraint<"$addr.ptrreg = $ea_result">,
NoEncode<"$ea_result">;
}
}
// Indexed (r+r) Loads.
//
let canFoldAsLoad = 1, PPC970_Unit = 2 in {
def LBZX : XForm_1<31, 87, (outs gprc:$rD), (ins memrr:$src),
"lbzx $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi8 xaddr:$src))]>;
def LHAX : XForm_1<31, 343, (outs gprc:$rD), (ins memrr:$src),
"lhax $rD, $src", LdStLHA,
[(set i32:$rD, (sextloadi16 xaddr:$src))]>,
PPC970_DGroup_Cracked;
def LHZX : XForm_1<31, 279, (outs gprc:$rD), (ins memrr:$src),
"lhzx $rD, $src", LdStLoad,
[(set i32:$rD, (zextloadi16 xaddr:$src))]>;
def LWZX : XForm_1<31, 23, (outs gprc:$rD), (ins memrr:$src),
"lwzx $rD, $src", LdStLoad,
[(set i32:$rD, (load xaddr:$src))]>;
def LHBRX : XForm_1<31, 790, (outs gprc:$rD), (ins memrr:$src),
"lhbrx $rD, $src", LdStLoad,
[(set i32:$rD, (PPClbrx xoaddr:$src, i16))]>;
def LWBRX : XForm_1<31, 534, (outs gprc:$rD), (ins memrr:$src),
"lwbrx $rD, $src", LdStLoad,
[(set i32:$rD, (PPClbrx xoaddr:$src, i32))]>;
def LFSX : XForm_25<31, 535, (outs f4rc:$frD), (ins memrr:$src),
"lfsx $frD, $src", LdStLFD,
[(set f32:$frD, (load xaddr:$src))]>;
def LFDX : XForm_25<31, 599, (outs f8rc:$frD), (ins memrr:$src),
"lfdx $frD, $src", LdStLFD,
[(set f64:$frD, (load xaddr:$src))]>;
def LFIWAX : XForm_25<31, 855, (outs f8rc:$frD), (ins memrr:$src),
"lfiwax $frD, $src", LdStLFD,
[(set f64:$frD, (PPClfiwax xoaddr:$src))]>;
def LFIWZX : XForm_25<31, 887, (outs f8rc:$frD), (ins memrr:$src),
"lfiwzx $frD, $src", LdStLFD,
[(set f64:$frD, (PPClfiwzx xoaddr:$src))]>;
}
// Load Multiple
def LMW : DForm_1<46, (outs gprc:$rD), (ins memri:$src),
"lmw $rD, $src", LdStLMW, []>;
//===----------------------------------------------------------------------===//
// PPC32 Store Instructions.
//
// Unindexed (r+i) Stores.
let PPC970_Unit = 2 in {
def STB : DForm_1<38, (outs), (ins gprc:$rS, memri:$src),
"stb $rS, $src", LdStStore,
[(truncstorei8 i32:$rS, iaddr:$src)]>;
def STH : DForm_1<44, (outs), (ins gprc:$rS, memri:$src),
"sth $rS, $src", LdStStore,
[(truncstorei16 i32:$rS, iaddr:$src)]>;
def STW : DForm_1<36, (outs), (ins gprc:$rS, memri:$src),
"stw $rS, $src", LdStStore,
[(store i32:$rS, iaddr:$src)]>;
def STFS : DForm_1<52, (outs), (ins f4rc:$rS, memri:$dst),
"stfs $rS, $dst", LdStSTFD,
[(store f32:$rS, iaddr:$dst)]>;
def STFD : DForm_1<54, (outs), (ins f8rc:$rS, memri:$dst),
"stfd $rS, $dst", LdStSTFD,
[(store f64:$rS, iaddr:$dst)]>;
}
// Unindexed (r+i) Stores with Update (preinc).
let PPC970_Unit = 2, mayStore = 1 in {
def STBU : DForm_1<39, (outs ptr_rc_nor0:$ea_res), (ins gprc:$rS, memri:$dst),
"stbu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STHU : DForm_1<45, (outs ptr_rc_nor0:$ea_res), (ins gprc:$rS, memri:$dst),
"sthu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STWU : DForm_1<37, (outs ptr_rc_nor0:$ea_res), (ins gprc:$rS, memri:$dst),
"stwu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STFSU : DForm_1<53, (outs ptr_rc_nor0:$ea_res), (ins f4rc:$rS, memri:$dst),
"stfsu $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def STFDU : DForm_1<55, (outs ptr_rc_nor0:$ea_res), (ins f8rc:$rS, memri:$dst),
"stfdu $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
}
// Patterns to match the pre-inc stores. We can't put the patterns on
// the instruction definitions directly as ISel wants the address base
// and offset to be separate operands, not a single complex operand.
def : Pat<(pre_truncsti8 i32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STBU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_truncsti16 i32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STHU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_store i32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STWU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_store f32:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STFSU $rS, iaddroff:$ptroff, $ptrreg)>;
def : Pat<(pre_store f64:$rS, iPTR:$ptrreg, iaddroff:$ptroff),
(STFDU $rS, iaddroff:$ptroff, $ptrreg)>;
// Indexed (r+r) Stores.
let PPC970_Unit = 2 in {
def STBX : XForm_8<31, 215, (outs), (ins gprc:$rS, memrr:$dst),
"stbx $rS, $dst", LdStStore,
[(truncstorei8 i32:$rS, xaddr:$dst)]>,
PPC970_DGroup_Cracked;
def STHX : XForm_8<31, 407, (outs), (ins gprc:$rS, memrr:$dst),
"sthx $rS, $dst", LdStStore,
[(truncstorei16 i32:$rS, xaddr:$dst)]>,
PPC970_DGroup_Cracked;
def STWX : XForm_8<31, 151, (outs), (ins gprc:$rS, memrr:$dst),
"stwx $rS, $dst", LdStStore,
[(store i32:$rS, xaddr:$dst)]>,
PPC970_DGroup_Cracked;
def STHBRX: XForm_8<31, 918, (outs), (ins gprc:$rS, memrr:$dst),
"sthbrx $rS, $dst", LdStStore,
[(PPCstbrx i32:$rS, xoaddr:$dst, i16)]>,
PPC970_DGroup_Cracked;
def STWBRX: XForm_8<31, 662, (outs), (ins gprc:$rS, memrr:$dst),
"stwbrx $rS, $dst", LdStStore,
[(PPCstbrx i32:$rS, xoaddr:$dst, i32)]>,
PPC970_DGroup_Cracked;
def STFIWX: XForm_28<31, 983, (outs), (ins f8rc:$frS, memrr:$dst),
"stfiwx $frS, $dst", LdStSTFD,
[(PPCstfiwx f64:$frS, xoaddr:$dst)]>;
def STFSX : XForm_28<31, 663, (outs), (ins f4rc:$frS, memrr:$dst),
"stfsx $frS, $dst", LdStSTFD,
[(store f32:$frS, xaddr:$dst)]>;
def STFDX : XForm_28<31, 727, (outs), (ins f8rc:$frS, memrr:$dst),
"stfdx $frS, $dst", LdStSTFD,
[(store f64:$frS, xaddr:$dst)]>;
}
// Indexed (r+r) Stores with Update (preinc).
let PPC970_Unit = 2, mayStore = 1 in {
def STBUX : XForm_8<31, 247, (outs ptr_rc_nor0:$ea_res), (ins gprc:$rS, memrr:$dst),
"stbux $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STHUX : XForm_8<31, 439, (outs ptr_rc_nor0:$ea_res), (ins gprc:$rS, memrr:$dst),
"sthux $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STWUX : XForm_8<31, 183, (outs ptr_rc_nor0:$ea_res), (ins gprc:$rS, memrr:$dst),
"stwux $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STFSUX: XForm_8<31, 695, (outs ptr_rc_nor0:$ea_res), (ins f4rc:$rS, memrr:$dst),
"stfsux $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
def STFDUX: XForm_8<31, 759, (outs ptr_rc_nor0:$ea_res), (ins f8rc:$rS, memrr:$dst),
"stfdux $rS, $dst", LdStSTFDU, []>,
RegConstraint<"$dst.ptrreg = $ea_res">, NoEncode<"$ea_res">,
PPC970_DGroup_Cracked;
}
// Patterns to match the pre-inc stores. We can't put the patterns on
// the instruction definitions directly as ISel wants the address base
// and offset to be separate operands, not a single complex operand.
def : Pat<(pre_truncsti8 i32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STBUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_truncsti16 i32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STHUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_store i32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STWUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_store f32:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STFSUX $rS, $ptrreg, $ptroff)>;
def : Pat<(pre_store f64:$rS, iPTR:$ptrreg, iPTR:$ptroff),
(STFDUX $rS, $ptrreg, $ptroff)>;
// Store Multiple
def STMW : DForm_1<47, (outs), (ins gprc:$rS, memri:$dst),
"stmw $rS, $dst", LdStLMW, []>;
def SYNC : XForm_24_sync<31, 598, (outs), (ins i32imm:$L),
"sync $L", LdStSync, []>;
def : Pat<(int_ppc_sync), (SYNC 0)>;
//===----------------------------------------------------------------------===//
// PPC32 Arithmetic Instructions.
//
let PPC970_Unit = 1 in { // FXU Operations.
def ADDI : DForm_2<14, (outs gprc:$rD), (ins gprc_nor0:$rA, s16imm:$imm),
"addi $rD, $rA, $imm", IntSimple,
[(set i32:$rD, (add i32:$rA, imm32SExt16:$imm))]>;
let BaseName = "addic" in {
let Defs = [CARRY] in
def ADDIC : DForm_2<12, (outs gprc:$rD), (ins gprc:$rA, s16imm:$imm),
"addic $rD, $rA, $imm", IntGeneral,
[(set i32:$rD, (addc i32:$rA, imm32SExt16:$imm))]>,
RecFormRel, PPC970_DGroup_Cracked;
let Defs = [CARRY, CR0] in
def ADDICo : DForm_2<13, (outs gprc:$rD), (ins gprc:$rA, s16imm:$imm),
"addic. $rD, $rA, $imm", IntGeneral,
[]>, isDOT, RecFormRel;
}
def ADDIS : DForm_2<15, (outs gprc:$rD), (ins gprc_nor0:$rA, s17imm:$imm),
"addis $rD, $rA, $imm", IntSimple,
[(set i32:$rD, (add i32:$rA, imm16ShiftedSExt:$imm))]>;
let isCodeGenOnly = 1 in
def LA : DForm_2<14, (outs gprc:$rD), (ins gprc_nor0:$rA, s16imm:$sym),
"la $rD, $sym($rA)", IntGeneral,
[(set i32:$rD, (add i32:$rA,
(PPClo tglobaladdr:$sym, 0)))]>;
def MULLI : DForm_2< 7, (outs gprc:$rD), (ins gprc:$rA, s16imm:$imm),
"mulli $rD, $rA, $imm", IntMulLI,
[(set i32:$rD, (mul i32:$rA, imm32SExt16:$imm))]>;
let Defs = [CARRY] in
def SUBFIC : DForm_2< 8, (outs gprc:$rD), (ins gprc:$rA, s16imm:$imm),
"subfic $rD, $rA, $imm", IntGeneral,
[(set i32:$rD, (subc imm32SExt16:$imm, i32:$rA))]>;
let isReMaterializable = 1, isAsCheapAsAMove = 1, isMoveImm = 1 in {
def LI : DForm_2_r0<14, (outs gprc:$rD), (ins s16imm:$imm),
"li $rD, $imm", IntSimple,
[(set i32:$rD, imm32SExt16:$imm)]>;
def LIS : DForm_2_r0<15, (outs gprc:$rD), (ins s17imm:$imm),
"lis $rD, $imm", IntSimple,
[(set i32:$rD, imm16ShiftedSExt:$imm)]>;
}
}
let PPC970_Unit = 1 in { // FXU Operations.
let Defs = [CR0] in {
def ANDIo : DForm_4<28, (outs gprc:$dst), (ins gprc:$src1, u16imm:$src2),
"andi. $dst, $src1, $src2", IntGeneral,
[(set i32:$dst, (and i32:$src1, immZExt16:$src2))]>,
isDOT;
def ANDISo : DForm_4<29, (outs gprc:$dst), (ins gprc:$src1, u16imm:$src2),
"andis. $dst, $src1, $src2", IntGeneral,
[(set i32:$dst, (and i32:$src1, imm16ShiftedZExt:$src2))]>,
isDOT;
}
def ORI : DForm_4<24, (outs gprc:$dst), (ins gprc:$src1, u16imm:$src2),
"ori $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (or i32:$src1, immZExt16:$src2))]>;
def ORIS : DForm_4<25, (outs gprc:$dst), (ins gprc:$src1, u16imm:$src2),
"oris $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (or i32:$src1, imm16ShiftedZExt:$src2))]>;
def XORI : DForm_4<26, (outs gprc:$dst), (ins gprc:$src1, u16imm:$src2),
"xori $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (xor i32:$src1, immZExt16:$src2))]>;
def XORIS : DForm_4<27, (outs gprc:$dst), (ins gprc:$src1, u16imm:$src2),
"xoris $dst, $src1, $src2", IntSimple,
[(set i32:$dst, (xor i32:$src1, imm16ShiftedZExt:$src2))]>;
def NOP : DForm_4_zero<24, (outs), (ins), "nop", IntSimple,
[]>;
let isCompare = 1, neverHasSideEffects = 1 in {
def CMPWI : DForm_5_ext<11, (outs crrc:$crD), (ins gprc:$rA, s16imm:$imm),
"cmpwi $crD, $rA, $imm", IntCompare>;
def CMPLWI : DForm_6_ext<10, (outs crrc:$dst), (ins gprc:$src1, u16imm:$src2),
"cmplwi $dst, $src1, $src2", IntCompare>;
}
}
let PPC970_Unit = 1, neverHasSideEffects = 1 in { // FXU Operations.
defm NAND : XForm_6r<31, 476, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"nand", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (not (and i32:$rS, i32:$rB)))]>;
defm AND : XForm_6r<31, 28, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"and", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (and i32:$rS, i32:$rB))]>;
defm ANDC : XForm_6r<31, 60, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"andc", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (and i32:$rS, (not i32:$rB)))]>;
defm OR : XForm_6r<31, 444, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"or", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (or i32:$rS, i32:$rB))]>;
defm NOR : XForm_6r<31, 124, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"nor", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (not (or i32:$rS, i32:$rB)))]>;
defm ORC : XForm_6r<31, 412, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"orc", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (or i32:$rS, (not i32:$rB)))]>;
defm EQV : XForm_6r<31, 284, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"eqv", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (not (xor i32:$rS, i32:$rB)))]>;
defm XOR : XForm_6r<31, 316, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"xor", "$rA, $rS, $rB", IntSimple,
[(set i32:$rA, (xor i32:$rS, i32:$rB))]>;
defm SLW : XForm_6r<31, 24, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"slw", "$rA, $rS, $rB", IntGeneral,
[(set i32:$rA, (PPCshl i32:$rS, i32:$rB))]>;
defm SRW : XForm_6r<31, 536, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"srw", "$rA, $rS, $rB", IntGeneral,
[(set i32:$rA, (PPCsrl i32:$rS, i32:$rB))]>;
defm SRAW : XForm_6rc<31, 792, (outs gprc:$rA), (ins gprc:$rS, gprc:$rB),
"sraw", "$rA, $rS, $rB", IntShift,
[(set i32:$rA, (PPCsra i32:$rS, i32:$rB))]>;
}
let PPC970_Unit = 1 in { // FXU Operations.
let neverHasSideEffects = 1 in {
defm SRAWI : XForm_10rc<31, 824, (outs gprc:$rA), (ins gprc:$rS, u5imm:$SH),
"srawi", "$rA, $rS, $SH", IntShift,
[(set i32:$rA, (sra i32:$rS, (i32 imm:$SH)))]>;
defm CNTLZW : XForm_11r<31, 26, (outs gprc:$rA), (ins gprc:$rS),
"cntlzw", "$rA, $rS", IntGeneral,
[(set i32:$rA, (ctlz i32:$rS))]>;
defm EXTSB : XForm_11r<31, 954, (outs gprc:$rA), (ins gprc:$rS),
"extsb", "$rA, $rS", IntSimple,
[(set i32:$rA, (sext_inreg i32:$rS, i8))]>;
defm EXTSH : XForm_11r<31, 922, (outs gprc:$rA), (ins gprc:$rS),
"extsh", "$rA, $rS", IntSimple,
[(set i32:$rA, (sext_inreg i32:$rS, i16))]>;
}
let isCompare = 1, neverHasSideEffects = 1 in {
def CMPW : XForm_16_ext<31, 0, (outs crrc:$crD), (ins gprc:$rA, gprc:$rB),
"cmpw $crD, $rA, $rB", IntCompare>;
def CMPLW : XForm_16_ext<31, 32, (outs crrc:$crD), (ins gprc:$rA, gprc:$rB),
"cmplw $crD, $rA, $rB", IntCompare>;
}
}
let PPC970_Unit = 3 in { // FPU Operations.
//def FCMPO : XForm_17<63, 32, (outs CRRC:$crD), (ins FPRC:$fA, FPRC:$fB),
// "fcmpo $crD, $fA, $fB", FPCompare>;
let isCompare = 1, neverHasSideEffects = 1 in {
def FCMPUS : XForm_17<63, 0, (outs crrc:$crD), (ins f4rc:$fA, f4rc:$fB),
"fcmpu $crD, $fA, $fB", FPCompare>;
def FCMPUD : XForm_17<63, 0, (outs crrc:$crD), (ins f8rc:$fA, f8rc:$fB),
"fcmpu $crD, $fA, $fB", FPCompare>;
}
let Uses = [RM] in {
let neverHasSideEffects = 1 in {
defm FCTIWZ : XForm_26r<63, 15, (outs f8rc:$frD), (ins f8rc:$frB),
"fctiwz", "$frD, $frB", FPGeneral,
[(set f64:$frD, (PPCfctiwz f64:$frB))]>;
defm FRSP : XForm_26r<63, 12, (outs f4rc:$frD), (ins f8rc:$frB),
"frsp", "$frD, $frB", FPGeneral,
[(set f32:$frD, (fround f64:$frB))]>;
// The frin -> nearbyint mapping is valid only in fast-math mode.
let Interpretation64Bit = 1 in
defm FRIND : XForm_26r<63, 392, (outs f8rc:$frD), (ins f8rc:$frB),
"frin", "$frD, $frB", FPGeneral,
[(set f64:$frD, (fnearbyint f64:$frB))]>;
defm FRINS : XForm_26r<63, 392, (outs f4rc:$frD), (ins f4rc:$frB),
"frin", "$frD, $frB", FPGeneral,
[(set f32:$frD, (fnearbyint f32:$frB))]>;
}
// These pseudos expand to rint but also set FE_INEXACT when the result does
// not equal the argument.
let usesCustomInserter = 1, Defs = [RM] in { // FIXME: Model FPSCR!
def FRINDrint : Pseudo<(outs f8rc:$frD), (ins f8rc:$frB),
"#FRINDrint", [(set f64:$frD, (frint f64:$frB))]>;
def FRINSrint : Pseudo<(outs f4rc:$frD), (ins f4rc:$frB),
"#FRINSrint", [(set f32:$frD, (frint f32:$frB))]>;
}
let neverHasSideEffects = 1 in {
let Interpretation64Bit = 1 in
defm FRIPD : XForm_26r<63, 456, (outs f8rc:$frD), (ins f8rc:$frB),
"frip", "$frD, $frB", FPGeneral,
[(set f64:$frD, (fceil f64:$frB))]>;
defm FRIPS : XForm_26r<63, 456, (outs f4rc:$frD), (ins f4rc:$frB),
"frip", "$frD, $frB", FPGeneral,
[(set f32:$frD, (fceil f32:$frB))]>;
let Interpretation64Bit = 1 in
defm FRIZD : XForm_26r<63, 424, (outs f8rc:$frD), (ins f8rc:$frB),
"friz", "$frD, $frB", FPGeneral,
[(set f64:$frD, (ftrunc f64:$frB))]>;
defm FRIZS : XForm_26r<63, 424, (outs f4rc:$frD), (ins f4rc:$frB),
"friz", "$frD, $frB", FPGeneral,
[(set f32:$frD, (ftrunc f32:$frB))]>;
let Interpretation64Bit = 1 in
defm FRIMD : XForm_26r<63, 488, (outs f8rc:$frD), (ins f8rc:$frB),
"frim", "$frD, $frB", FPGeneral,
[(set f64:$frD, (ffloor f64:$frB))]>;
defm FRIMS : XForm_26r<63, 488, (outs f4rc:$frD), (ins f4rc:$frB),
"frim", "$frD, $frB", FPGeneral,
[(set f32:$frD, (ffloor f32:$frB))]>;
defm FSQRT : XForm_26r<63, 22, (outs f8rc:$frD), (ins f8rc:$frB),
"fsqrt", "$frD, $frB", FPSqrt,
[(set f64:$frD, (fsqrt f64:$frB))]>;
defm FSQRTS : XForm_26r<59, 22, (outs f4rc:$frD), (ins f4rc:$frB),
"fsqrts", "$frD, $frB", FPSqrt,
[(set f32:$frD, (fsqrt f32:$frB))]>;
}
}
}
/// Note that FMR is defined as pseudo-ops on the PPC970 because they are
/// often coalesced away and we don't want the dispatch group builder to think
/// that they will fill slots (which could cause the load of a LSU reject to
/// sneak into a d-group with a store).
let neverHasSideEffects = 1 in
defm FMR : XForm_26r<63, 72, (outs f4rc:$frD), (ins f4rc:$frB),
"fmr", "$frD, $frB", FPGeneral,
[]>, // (set f32:$frD, f32:$frB)
PPC970_Unit_Pseudo;
let PPC970_Unit = 3, neverHasSideEffects = 1 in { // FPU Operations.
// These are artificially split into two different forms, for 4/8 byte FP.
defm FABSS : XForm_26r<63, 264, (outs f4rc:$frD), (ins f4rc:$frB),
"fabs", "$frD, $frB", FPGeneral,
[(set f32:$frD, (fabs f32:$frB))]>;
let Interpretation64Bit = 1 in
defm FABSD : XForm_26r<63, 264, (outs f8rc:$frD), (ins f8rc:$frB),
"fabs", "$frD, $frB", FPGeneral,
[(set f64:$frD, (fabs f64:$frB))]>;
defm FNABSS : XForm_26r<63, 136, (outs f4rc:$frD), (ins f4rc:$frB),
"fnabs", "$frD, $frB", FPGeneral,
[(set f32:$frD, (fneg (fabs f32:$frB)))]>;
let Interpretation64Bit = 1 in
defm FNABSD : XForm_26r<63, 136, (outs f8rc:$frD), (ins f8rc:$frB),
"fnabs", "$frD, $frB", FPGeneral,
[(set f64:$frD, (fneg (fabs f64:$frB)))]>;
defm FNEGS : XForm_26r<63, 40, (outs f4rc:$frD), (ins f4rc:$frB),
"fneg", "$frD, $frB", FPGeneral,
[(set f32:$frD, (fneg f32:$frB))]>;
let Interpretation64Bit = 1 in
defm FNEGD : XForm_26r<63, 40, (outs f8rc:$frD), (ins f8rc:$frB),
"fneg", "$frD, $frB", FPGeneral,
[(set f64:$frD, (fneg f64:$frB))]>;
// Reciprocal estimates.
defm FRE : XForm_26r<63, 24, (outs f8rc:$frD), (ins f8rc:$frB),
"fre", "$frD, $frB", FPGeneral,
[(set f64:$frD, (PPCfre f64:$frB))]>;
defm FRES : XForm_26r<59, 24, (outs f4rc:$frD), (ins f4rc:$frB),
"fres", "$frD, $frB", FPGeneral,
[(set f32:$frD, (PPCfre f32:$frB))]>;
defm FRSQRTE : XForm_26r<63, 26, (outs f8rc:$frD), (ins f8rc:$frB),
"frsqrte", "$frD, $frB", FPGeneral,
[(set f64:$frD, (PPCfrsqrte f64:$frB))]>;
defm FRSQRTES : XForm_26r<59, 26, (outs f4rc:$frD), (ins f4rc:$frB),
"frsqrtes", "$frD, $frB", FPGeneral,
[(set f32:$frD, (PPCfrsqrte f32:$frB))]>;
}
// XL-Form instructions. condition register logical ops.
//
let neverHasSideEffects = 1 in
def MCRF : XLForm_3<19, 0, (outs crrc:$BF), (ins crrc:$BFA),
"mcrf $BF, $BFA", BrMCR>,
PPC970_DGroup_First, PPC970_Unit_CRU;
def CRAND : XLForm_1<19, 257, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"crand $CRD, $CRA, $CRB", BrCR, []>;
def CRNAND : XLForm_1<19, 225, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"crnand $CRD, $CRA, $CRB", BrCR, []>;
def CROR : XLForm_1<19, 449, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"cror $CRD, $CRA, $CRB", BrCR, []>;
def CRXOR : XLForm_1<19, 193, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"crxor $CRD, $CRA, $CRB", BrCR, []>;
def CRNOR : XLForm_1<19, 33, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"crnor $CRD, $CRA, $CRB", BrCR, []>;
def CREQV : XLForm_1<19, 289, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"creqv $CRD, $CRA, $CRB", BrCR, []>;
def CRANDC : XLForm_1<19, 129, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"crandc $CRD, $CRA, $CRB", BrCR, []>;
def CRORC : XLForm_1<19, 417, (outs crbitrc:$CRD),
(ins crbitrc:$CRA, crbitrc:$CRB),
"crorc $CRD, $CRA, $CRB", BrCR, []>;
let isCodeGenOnly = 1 in {
def CRSET : XLForm_1_ext<19, 289, (outs crbitrc:$dst), (ins),
"creqv $dst, $dst, $dst", BrCR,
[]>;
def CRUNSET: XLForm_1_ext<19, 193, (outs crbitrc:$dst), (ins),
"crxor $dst, $dst, $dst", BrCR,
[]>;
let Defs = [CR1EQ], CRD = 6 in {
def CR6SET : XLForm_1_ext<19, 289, (outs), (ins),
"creqv 6, 6, 6", BrCR,
[(PPCcr6set)]>;
def CR6UNSET: XLForm_1_ext<19, 193, (outs), (ins),
"crxor 6, 6, 6", BrCR,
[(PPCcr6unset)]>;
}
}
// XFX-Form instructions. Instructions that deal with SPRs.
//
def MFSPR : XFXForm_1<31, 339, (outs gprc:$RT), (ins i32imm:$SPR),
"mfspr $RT, $SPR", SprMFSPR>;
def MTSPR : XFXForm_1<31, 467, (outs), (ins i32imm:$SPR, gprc:$RT),
"mtspr $SPR, $RT", SprMTSPR>;
def MFTB : XFXForm_1<31, 371, (outs gprc:$RT), (ins i32imm:$SPR),
"mftb $RT, $SPR", SprMFTB>;
let Uses = [CTR] in {
def MFCTR : XFXForm_1_ext<31, 339, 9, (outs gprc:$rT), (ins),
"mfctr $rT", SprMFSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
let Defs = [CTR], Pattern = [(PPCmtctr i32:$rS)] in {
def MTCTR : XFXForm_7_ext<31, 467, 9, (outs), (ins gprc:$rS),
"mtctr $rS", SprMTSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
Implement PPC counter loops as a late IR-level pass The old PPCCTRLoops pass, like the Hexagon pass version from which it was derived, could only handle some simple loops in canonical form. We cannot directly adapt the new Hexagon hardware loops pass, however, because the Hexagon pass contains a fundamental assumption that non-constant-trip-count loops will contain a guard, and this is not always true (the result being that incorrect negative counts can be generated). With this commit, we replace the pass with a late IR-level pass which makes use of SE to calculate the backedge-taken counts and safely generate the loop-count expressions (including any necessary max() parts). This IR level pass inserts custom intrinsics that are lowered into the desired decrement-and-branch instructions. The most fragile part of this new implementation is that interfering uses of the counter register must be detected on the IR level (and, on PPC, this also includes any indirect branches in addition to function calls). Also, to make all of this work, we need a variant of the mtctr instruction that is marked as having side effects. Without this, machine-code level CSE, DCE, etc. illegally transform the resulting code. Hopefully, this can be improved in the future. This new pass is smaller than the original (and much smaller than the new Hexagon hardware loops pass), and can handle many additional cases correctly. In addition, the preheader-creation code has been copied from LoopSimplify, and after we decide on where it belongs, this code will be refactored so that it can be explicitly shared (making this implementation even smaller). The new test-case files ctrloop-{le,lt,ne}.ll have been adapted from tests for the new Hexagon pass. There are a few classes of loops that this pass does not transform (noted by FIXMEs in the files), but these deficiencies can be addressed within the SE infrastructure (thus helping many other passes as well). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181927 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-15 21:37:41 +00:00
let hasSideEffects = 1, isCodeGenOnly = 1, Defs = [CTR] in {
let Pattern = [(int_ppc_mtctr i32:$rS)] in
def MTCTRloop : XFXForm_7_ext<31, 467, 9, (outs), (ins gprc:$rS),
"mtctr $rS", SprMTSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
Implement PPC counter loops as a late IR-level pass The old PPCCTRLoops pass, like the Hexagon pass version from which it was derived, could only handle some simple loops in canonical form. We cannot directly adapt the new Hexagon hardware loops pass, however, because the Hexagon pass contains a fundamental assumption that non-constant-trip-count loops will contain a guard, and this is not always true (the result being that incorrect negative counts can be generated). With this commit, we replace the pass with a late IR-level pass which makes use of SE to calculate the backedge-taken counts and safely generate the loop-count expressions (including any necessary max() parts). This IR level pass inserts custom intrinsics that are lowered into the desired decrement-and-branch instructions. The most fragile part of this new implementation is that interfering uses of the counter register must be detected on the IR level (and, on PPC, this also includes any indirect branches in addition to function calls). Also, to make all of this work, we need a variant of the mtctr instruction that is marked as having side effects. Without this, machine-code level CSE, DCE, etc. illegally transform the resulting code. Hopefully, this can be improved in the future. This new pass is smaller than the original (and much smaller than the new Hexagon hardware loops pass), and can handle many additional cases correctly. In addition, the preheader-creation code has been copied from LoopSimplify, and after we decide on where it belongs, this code will be refactored so that it can be explicitly shared (making this implementation even smaller). The new test-case files ctrloop-{le,lt,ne}.ll have been adapted from tests for the new Hexagon pass. There are a few classes of loops that this pass does not transform (noted by FIXMEs in the files), but these deficiencies can be addressed within the SE infrastructure (thus helping many other passes as well). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181927 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-15 21:37:41 +00:00
}
let Defs = [LR] in {
def MTLR : XFXForm_7_ext<31, 467, 8, (outs), (ins gprc:$rS),
"mtlr $rS", SprMTSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
let Uses = [LR] in {
def MFLR : XFXForm_1_ext<31, 339, 8, (outs gprc:$rT), (ins),
"mflr $rT", SprMFSPR>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
let isCodeGenOnly = 1 in {
// Move to/from VRSAVE: despite being a SPR, the VRSAVE register is renamed
// like a GPR on the PPC970. As such, copies in and out have the same
// performance characteristics as an OR instruction.
def MTVRSAVE : XFXForm_7_ext<31, 467, 256, (outs), (ins gprc:$rS),
"mtspr 256, $rS", IntGeneral>,
PPC970_DGroup_Single, PPC970_Unit_FXU;
def MFVRSAVE : XFXForm_1_ext<31, 339, 256, (outs gprc:$rT), (ins),
"mfspr $rT, 256", IntGeneral>,
PPC970_DGroup_First, PPC970_Unit_FXU;
def MTVRSAVEv : XFXForm_7_ext<31, 467, 256,
(outs VRSAVERC:$reg), (ins gprc:$rS),
"mtspr 256, $rS", IntGeneral>,
PPC970_DGroup_Single, PPC970_Unit_FXU;
def MFVRSAVEv : XFXForm_1_ext<31, 339, 256, (outs gprc:$rT),
(ins VRSAVERC:$reg),
"mfspr $rT, 256", IntGeneral>,
PPC970_DGroup_First, PPC970_Unit_FXU;
}
// SPILL_VRSAVE - Indicate that we're dumping the VRSAVE register,
// so we'll need to scavenge a register for it.
let mayStore = 1 in
def SPILL_VRSAVE : Pseudo<(outs), (ins VRSAVERC:$vrsave, memri:$F),
"#SPILL_VRSAVE", []>;
// RESTORE_VRSAVE - Indicate that we're restoring the VRSAVE register (previously
// spilled), so we'll need to scavenge a register for it.
let mayLoad = 1 in
def RESTORE_VRSAVE : Pseudo<(outs VRSAVERC:$vrsave), (ins memri:$F),
"#RESTORE_VRSAVE", []>;
let neverHasSideEffects = 1 in {
def MTOCRF: XFXForm_5a<31, 144, (outs crbitm:$FXM), (ins gprc:$ST),
"mtocrf $FXM, $ST", BrMCRX>,
PPC970_DGroup_First, PPC970_Unit_CRU;
def MTCRF : XFXForm_5<31, 144, (outs), (ins i32imm:$FXM, gprc:$rS),
"mtcrf $FXM, $rS", BrMCRX>,
PPC970_MicroCode, PPC970_Unit_CRU;
def MFOCRF: XFXForm_5a<31, 19, (outs gprc:$rT), (ins crbitm:$FXM),
"mfocrf $rT, $FXM", SprMFCR>,
PPC970_DGroup_First, PPC970_Unit_CRU;
def MFCR : XFXForm_3<31, 19, (outs gprc:$rT), (ins),
"mfcr $rT", SprMFCR>,
PPC970_MicroCode, PPC970_Unit_CRU;
} // neverHasSideEffects = 1
// Pseudo instruction to perform FADD in round-to-zero mode.
let usesCustomInserter = 1, Uses = [RM] in {
def FADDrtz: Pseudo<(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRB), "",
[(set f64:$FRT, (PPCfaddrtz f64:$FRA, f64:$FRB))]>;
}
// The above pseudo gets expanded to make use of the following instructions
// to manipulate FPSCR. Note that FPSCR is not modeled at the DAG level.
let Uses = [RM], Defs = [RM] in {
def MTFSB0 : XForm_43<63, 70, (outs), (ins u5imm:$FM),
"mtfsb0 $FM", IntMTFSB0, []>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
def MTFSB1 : XForm_43<63, 38, (outs), (ins u5imm:$FM),
"mtfsb1 $FM", IntMTFSB0, []>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
def MTFSF : XFLForm<63, 711, (outs), (ins i32imm:$FM, f8rc:$rT),
"mtfsf $FM, $rT", IntMTFSB0, []>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
}
let Uses = [RM] in {
def MFFS : XForm_42<63, 583, (outs f8rc:$rT), (ins),
"mffs $rT", IntMFFS,
[(set f64:$rT, (PPCmffs))]>,
PPC970_DGroup_Single, PPC970_Unit_FPU;
}
let PPC970_Unit = 1, neverHasSideEffects = 1 in { // FXU Operations.
// XO-Form instructions. Arithmetic instructions that can set overflow bit
//
defm ADD4 : XOForm_1r<31, 266, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"add", "$rT, $rA, $rB", IntSimple,
[(set i32:$rT, (add i32:$rA, i32:$rB))]>;
defm ADDC : XOForm_1rc<31, 10, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"addc", "$rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (addc i32:$rA, i32:$rB))]>,
PPC970_DGroup_Cracked;
defm DIVW : XOForm_1r<31, 491, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"divw", "$rT, $rA, $rB", IntDivW,
[(set i32:$rT, (sdiv i32:$rA, i32:$rB))]>,
PPC970_DGroup_First, PPC970_DGroup_Cracked;
defm DIVWU : XOForm_1r<31, 459, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"divwu", "$rT, $rA, $rB", IntDivW,
[(set i32:$rT, (udiv i32:$rA, i32:$rB))]>,
PPC970_DGroup_First, PPC970_DGroup_Cracked;
defm MULHW : XOForm_1r<31, 75, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"mulhw", "$rT, $rA, $rB", IntMulHW,
[(set i32:$rT, (mulhs i32:$rA, i32:$rB))]>;
defm MULHWU : XOForm_1r<31, 11, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"mulhwu", "$rT, $rA, $rB", IntMulHWU,
[(set i32:$rT, (mulhu i32:$rA, i32:$rB))]>;
defm MULLW : XOForm_1r<31, 235, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"mullw", "$rT, $rA, $rB", IntMulHW,
[(set i32:$rT, (mul i32:$rA, i32:$rB))]>;
defm SUBF : XOForm_1r<31, 40, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"subf", "$rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (sub i32:$rB, i32:$rA))]>;
defm SUBFC : XOForm_1rc<31, 8, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"subfc", "$rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (subc i32:$rB, i32:$rA))]>,
PPC970_DGroup_Cracked;
defm NEG : XOForm_3r<31, 104, 0, (outs gprc:$rT), (ins gprc:$rA),
"neg", "$rT, $rA", IntSimple,
[(set i32:$rT, (ineg i32:$rA))]>;
let Uses = [CARRY] in {
defm ADDE : XOForm_1rc<31, 138, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"adde", "$rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (adde i32:$rA, i32:$rB))]>;
defm ADDME : XOForm_3rc<31, 234, 0, (outs gprc:$rT), (ins gprc:$rA),
"addme", "$rT, $rA", IntGeneral,
[(set i32:$rT, (adde i32:$rA, -1))]>;
defm ADDZE : XOForm_3rc<31, 202, 0, (outs gprc:$rT), (ins gprc:$rA),
"addze", "$rT, $rA", IntGeneral,
[(set i32:$rT, (adde i32:$rA, 0))]>;
defm SUBFE : XOForm_1rc<31, 136, 0, (outs gprc:$rT), (ins gprc:$rA, gprc:$rB),
"subfe", "$rT, $rA, $rB", IntGeneral,
[(set i32:$rT, (sube i32:$rB, i32:$rA))]>;
defm SUBFME : XOForm_3rc<31, 232, 0, (outs gprc:$rT), (ins gprc:$rA),
"subfme", "$rT, $rA", IntGeneral,
[(set i32:$rT, (sube -1, i32:$rA))]>;
defm SUBFZE : XOForm_3rc<31, 200, 0, (outs gprc:$rT), (ins gprc:$rA),
"subfze", "$rT, $rA", IntGeneral,
[(set i32:$rT, (sube 0, i32:$rA))]>;
}
}
// A-Form instructions. Most of the instructions executed in the FPU are of
// this type.
//
let PPC970_Unit = 3, neverHasSideEffects = 1 in { // FPU Operations.
let Uses = [RM] in {
defm FMADD : AForm_1r<63, 29,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRC, f8rc:$FRB),
"fmadd", "$FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT, (fma f64:$FRA, f64:$FRC, f64:$FRB))]>;
defm FMADDS : AForm_1r<59, 29,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRC, f4rc:$FRB),
"fmadds", "$FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT, (fma f32:$FRA, f32:$FRC, f32:$FRB))]>;
defm FMSUB : AForm_1r<63, 28,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRC, f8rc:$FRB),
"fmsub", "$FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT,
(fma f64:$FRA, f64:$FRC, (fneg f64:$FRB)))]>;
defm FMSUBS : AForm_1r<59, 28,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRC, f4rc:$FRB),
"fmsubs", "$FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT,
(fma f32:$FRA, f32:$FRC, (fneg f32:$FRB)))]>;
defm FNMADD : AForm_1r<63, 31,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRC, f8rc:$FRB),
"fnmadd", "$FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT,
(fneg (fma f64:$FRA, f64:$FRC, f64:$FRB)))]>;
defm FNMADDS : AForm_1r<59, 31,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRC, f4rc:$FRB),
"fnmadds", "$FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT,
(fneg (fma f32:$FRA, f32:$FRC, f32:$FRB)))]>;
defm FNMSUB : AForm_1r<63, 30,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRC, f8rc:$FRB),
"fnmsub", "$FRT, $FRA, $FRC, $FRB", FPFused,
[(set f64:$FRT, (fneg (fma f64:$FRA, f64:$FRC,
(fneg f64:$FRB))))]>;
defm FNMSUBS : AForm_1r<59, 30,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRC, f4rc:$FRB),
"fnmsubs", "$FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT, (fneg (fma f32:$FRA, f32:$FRC,
(fneg f32:$FRB))))]>;
}
// FSEL is artificially split into 4 and 8-byte forms for the result. To avoid
// having 4 of these, force the comparison to always be an 8-byte double (code
// should use an FMRSD if the input comparison value really wants to be a float)
// and 4/8 byte forms for the result and operand type..
let Interpretation64Bit = 1 in
defm FSELD : AForm_1r<63, 23,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRC, f8rc:$FRB),
"fsel", "$FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f64:$FRT, (PPCfsel f64:$FRA, f64:$FRC, f64:$FRB))]>;
defm FSELS : AForm_1r<63, 23,
(outs f4rc:$FRT), (ins f8rc:$FRA, f4rc:$FRC, f4rc:$FRB),
"fsel", "$FRT, $FRA, $FRC, $FRB", FPGeneral,
[(set f32:$FRT, (PPCfsel f64:$FRA, f32:$FRC, f32:$FRB))]>;
let Uses = [RM] in {
defm FADD : AForm_2r<63, 21,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRB),
"fadd", "$FRT, $FRA, $FRB", FPAddSub,
[(set f64:$FRT, (fadd f64:$FRA, f64:$FRB))]>;
defm FADDS : AForm_2r<59, 21,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRB),
"fadds", "$FRT, $FRA, $FRB", FPGeneral,
[(set f32:$FRT, (fadd f32:$FRA, f32:$FRB))]>;
defm FDIV : AForm_2r<63, 18,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRB),
"fdiv", "$FRT, $FRA, $FRB", FPDivD,
[(set f64:$FRT, (fdiv f64:$FRA, f64:$FRB))]>;
defm FDIVS : AForm_2r<59, 18,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRB),
"fdivs", "$FRT, $FRA, $FRB", FPDivS,
[(set f32:$FRT, (fdiv f32:$FRA, f32:$FRB))]>;
defm FMUL : AForm_3r<63, 25,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRC),
"fmul", "$FRT, $FRA, $FRC", FPFused,
[(set f64:$FRT, (fmul f64:$FRA, f64:$FRC))]>;
defm FMULS : AForm_3r<59, 25,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRC),
"fmuls", "$FRT, $FRA, $FRC", FPGeneral,
[(set f32:$FRT, (fmul f32:$FRA, f32:$FRC))]>;
defm FSUB : AForm_2r<63, 20,
(outs f8rc:$FRT), (ins f8rc:$FRA, f8rc:$FRB),
"fsub", "$FRT, $FRA, $FRB", FPAddSub,
[(set f64:$FRT, (fsub f64:$FRA, f64:$FRB))]>;
defm FSUBS : AForm_2r<59, 20,
(outs f4rc:$FRT), (ins f4rc:$FRA, f4rc:$FRB),
"fsubs", "$FRT, $FRA, $FRB", FPGeneral,
[(set f32:$FRT, (fsub f32:$FRA, f32:$FRB))]>;
}
}
let neverHasSideEffects = 1 in {
let PPC970_Unit = 1 in { // FXU Operations.
let isSelect = 1 in
def ISEL : AForm_4<31, 15,
(outs gprc:$rT), (ins gprc_nor0:$rA, gprc:$rB, crbitrc:$cond),
"isel $rT, $rA, $rB, $cond", IntGeneral,
[]>;
}
let PPC970_Unit = 1 in { // FXU Operations.
// M-Form instructions. rotate and mask instructions.
//
let isCommutable = 1 in {
// RLWIMI can be commuted if the rotate amount is zero.
defm RLWIMI : MForm_2r<20, (outs gprc:$rA),
(ins gprc:$rSi, gprc:$rS, u5imm:$SH, u5imm:$MB,
u5imm:$ME), "rlwimi", "$rA, $rS, $SH, $MB, $ME", IntRotate,
[]>, PPC970_DGroup_Cracked, RegConstraint<"$rSi = $rA">,
NoEncode<"$rSi">;
}
let BaseName = "rlwinm" in {
def RLWINM : MForm_2<21,
(outs gprc:$rA), (ins gprc:$rS, u5imm:$SH, u5imm:$MB, u5imm:$ME),
"rlwinm $rA, $rS, $SH, $MB, $ME", IntGeneral,
[]>, RecFormRel;
let Defs = [CR0] in
def RLWINMo : MForm_2<21,
(outs gprc:$rA), (ins gprc:$rS, u5imm:$SH, u5imm:$MB, u5imm:$ME),
"rlwinm. $rA, $rS, $SH, $MB, $ME", IntGeneral,
[]>, isDOT, RecFormRel, PPC970_DGroup_Cracked;
}
defm RLWNM : MForm_2r<23, (outs gprc:$rA),
(ins gprc:$rS, gprc:$rB, u5imm:$MB, u5imm:$ME),
"rlwnm", "$rA, $rS, $rB, $MB, $ME", IntGeneral,
[]>;
}
} // neverHasSideEffects = 1
//===----------------------------------------------------------------------===//
// PowerPC Instruction Patterns
//
// Arbitrary immediate support. Implement in terms of LIS/ORI.
def : Pat<(i32 imm:$imm),
(ORI (LIS (HI16 imm:$imm)), (LO16 imm:$imm))>;
// Implement the 'not' operation with the NOR instruction.
def NOT : Pat<(not i32:$in),
(NOR $in, $in)>;
// ADD an arbitrary immediate.
def : Pat<(add i32:$in, imm:$imm),
(ADDIS (ADDI $in, (LO16 imm:$imm)), (HA16 imm:$imm))>;
// OR an arbitrary immediate.
def : Pat<(or i32:$in, imm:$imm),
(ORIS (ORI $in, (LO16 imm:$imm)), (HI16 imm:$imm))>;
// XOR an arbitrary immediate.
def : Pat<(xor i32:$in, imm:$imm),
(XORIS (XORI $in, (LO16 imm:$imm)), (HI16 imm:$imm))>;
// SUBFIC
def : Pat<(sub imm32SExt16:$imm, i32:$in),
(SUBFIC $in, imm:$imm)>;
// SHL/SRL
def : Pat<(shl i32:$in, (i32 imm:$imm)),
(RLWINM $in, imm:$imm, 0, (SHL32 imm:$imm))>;
def : Pat<(srl i32:$in, (i32 imm:$imm)),
(RLWINM $in, (SRL32 imm:$imm), imm:$imm, 31)>;
// ROTL
def : Pat<(rotl i32:$in, i32:$sh),
(RLWNM $in, $sh, 0, 31)>;
def : Pat<(rotl i32:$in, (i32 imm:$imm)),
(RLWINM $in, imm:$imm, 0, 31)>;
// RLWNM
def : Pat<(and (rotl i32:$in, i32:$sh), maskimm32:$imm),
(RLWNM $in, $sh, (MB maskimm32:$imm), (ME maskimm32:$imm))>;
// Calls
def : Pat<(PPCcall (i32 tglobaladdr:$dst)),
(BL tglobaladdr:$dst)>;
def : Pat<(PPCcall (i32 texternalsym:$dst)),
(BL texternalsym:$dst)>;
def : Pat<(PPCtc_return (i32 tglobaladdr:$dst), imm:$imm),
(TCRETURNdi tglobaladdr:$dst, imm:$imm)>;
def : Pat<(PPCtc_return (i32 texternalsym:$dst), imm:$imm),
(TCRETURNdi texternalsym:$dst, imm:$imm)>;
def : Pat<(PPCtc_return CTRRC:$dst, imm:$imm),
(TCRETURNri CTRRC:$dst, imm:$imm)>;
// Hi and Lo for Darwin Global Addresses.
def : Pat<(PPChi tglobaladdr:$in, 0), (LIS tglobaladdr:$in)>;
def : Pat<(PPClo tglobaladdr:$in, 0), (LI tglobaladdr:$in)>;
def : Pat<(PPChi tconstpool:$in, 0), (LIS tconstpool:$in)>;
def : Pat<(PPClo tconstpool:$in, 0), (LI tconstpool:$in)>;
def : Pat<(PPChi tjumptable:$in, 0), (LIS tjumptable:$in)>;
def : Pat<(PPClo tjumptable:$in, 0), (LI tjumptable:$in)>;
def : Pat<(PPChi tblockaddress:$in, 0), (LIS tblockaddress:$in)>;
def : Pat<(PPClo tblockaddress:$in, 0), (LI tblockaddress:$in)>;
def : Pat<(PPChi tglobaltlsaddr:$g, i32:$in),
(ADDIS $in, tglobaltlsaddr:$g)>;
def : Pat<(PPClo tglobaltlsaddr:$g, i32:$in),
(ADDI $in, tglobaltlsaddr:$g)>;
def : Pat<(add i32:$in, (PPChi tglobaladdr:$g, 0)),
(ADDIS $in, tglobaladdr:$g)>;
def : Pat<(add i32:$in, (PPChi tconstpool:$g, 0)),
(ADDIS $in, tconstpool:$g)>;
def : Pat<(add i32:$in, (PPChi tjumptable:$g, 0)),
(ADDIS $in, tjumptable:$g)>;
def : Pat<(add i32:$in, (PPChi tblockaddress:$g, 0)),
(ADDIS $in, tblockaddress:$g)>;
// Standard shifts. These are represented separately from the real shifts above
// so that we can distinguish between shifts that allow 5-bit and 6-bit shift
// amounts.
def : Pat<(sra i32:$rS, i32:$rB),
(SRAW $rS, $rB)>;
def : Pat<(srl i32:$rS, i32:$rB),
(SRW $rS, $rB)>;
def : Pat<(shl i32:$rS, i32:$rB),
(SLW $rS, $rB)>;
def : Pat<(zextloadi1 iaddr:$src),
(LBZ iaddr:$src)>;
def : Pat<(zextloadi1 xaddr:$src),
(LBZX xaddr:$src)>;
def : Pat<(extloadi1 iaddr:$src),
(LBZ iaddr:$src)>;
def : Pat<(extloadi1 xaddr:$src),
(LBZX xaddr:$src)>;
def : Pat<(extloadi8 iaddr:$src),
(LBZ iaddr:$src)>;
def : Pat<(extloadi8 xaddr:$src),
(LBZX xaddr:$src)>;
def : Pat<(extloadi16 iaddr:$src),
(LHZ iaddr:$src)>;
def : Pat<(extloadi16 xaddr:$src),
(LHZX xaddr:$src)>;
def : Pat<(f64 (extloadf32 iaddr:$src)),
(COPY_TO_REGCLASS (LFS iaddr:$src), F8RC)>;
def : Pat<(f64 (extloadf32 xaddr:$src)),
(COPY_TO_REGCLASS (LFSX xaddr:$src), F8RC)>;
def : Pat<(f64 (fextend f32:$src)),
(COPY_TO_REGCLASS $src, F8RC)>;
def : Pat<(atomic_fence (imm), (imm)), (SYNC 0)>;
// Additional FNMSUB patterns: -a*c + b == -(a*c - b)
def : Pat<(fma (fneg f64:$A), f64:$C, f64:$B),
(FNMSUB $A, $C, $B)>;
def : Pat<(fma f64:$A, (fneg f64:$C), f64:$B),
(FNMSUB $A, $C, $B)>;
def : Pat<(fma (fneg f32:$A), f32:$C, f32:$B),
(FNMSUBS $A, $C, $B)>;
def : Pat<(fma f32:$A, (fneg f32:$C), f32:$B),
(FNMSUBS $A, $C, $B)>;
include "PPCInstrAltivec.td"
include "PPCInstr64Bit.td"
//===----------------------------------------------------------------------===//
// PowerPC Instructions used for assembler/disassembler only
//
def ISYNC : XLForm_2_ext<19, 150, 0, 0, 0, (outs), (ins),
"isync", SprISYNC, []>;
def ICBI : XForm_1a<31, 982, (outs), (ins memrr:$src),
"icbi $src", LdStICBI, []>;
def EIEIO : XForm_24_eieio<31, 854, (outs), (ins),
"eieio", LdStLoad, []>;
def WAIT : XForm_24_sync<31, 62, (outs), (ins i32imm:$L),
"wait $L", LdStLoad, []>;
//===----------------------------------------------------------------------===//
// PowerPC Assembler Instruction Aliases
//
// Pseudo-instructions for alternate assembly syntax (never used by codegen).
// These are aliases that require C++ handling to convert to the target
// instruction, while InstAliases can be handled directly by tblgen.
class PPCAsmPseudo<string asm, dag iops>
: Instruction {
let Namespace = "PPC";
bit PPC64 = 0; // Default value, override with isPPC64
let OutOperandList = (outs);
let InOperandList = iops;
let Pattern = [];
let AsmString = asm;
let isAsmParserOnly = 1;
let isPseudo = 1;
}
def : InstAlias<"sc", (SC 0)>;
def : InstAlias<"sync", (SYNC 0)>;
def : InstAlias<"msync", (SYNC 0)>;
def : InstAlias<"lwsync", (SYNC 1)>;
def : InstAlias<"ptesync", (SYNC 2)>;
def : InstAlias<"wait", (WAIT 0)>;
def : InstAlias<"waitrsv", (WAIT 1)>;
def : InstAlias<"waitimpl", (WAIT 2)>;
def : InstAlias<"crset $bx", (CREQV crbitrc:$bx, crbitrc:$bx, crbitrc:$bx)>;
def : InstAlias<"crclr $bx", (CRXOR crbitrc:$bx, crbitrc:$bx, crbitrc:$bx)>;
def : InstAlias<"crmove $bx, $by", (CROR crbitrc:$bx, crbitrc:$by, crbitrc:$by)>;
def : InstAlias<"crnot $bx, $by", (CRNOR crbitrc:$bx, crbitrc:$by, crbitrc:$by)>;
def : InstAlias<"mtxer $Rx", (MTSPR 1, gprc:$Rx)>;
def : InstAlias<"mfxer $Rx", (MFSPR gprc:$Rx, 1)>;
def : InstAlias<"mftb $Rx", (MFTB gprc:$Rx, 268)>;
def : InstAlias<"mftbu $Rx", (MFTB gprc:$Rx, 269)>;
def : InstAlias<"xnop", (XORI R0, R0, 0)>;
def : InstAlias<"mr $rA, $rB", (OR8 g8rc:$rA, g8rc:$rB, g8rc:$rB)>;
def : InstAlias<"mr. $rA, $rB", (OR8o g8rc:$rA, g8rc:$rB, g8rc:$rB)>;
def : InstAlias<"not $rA, $rB", (NOR8 g8rc:$rA, g8rc:$rB, g8rc:$rB)>;
def : InstAlias<"not. $rA, $rB", (NOR8o g8rc:$rA, g8rc:$rB, g8rc:$rB)>;
def : InstAlias<"mtcr $rA", (MTCRF8 255, g8rc:$rA)>;
def LAx : PPCAsmPseudo<"la $rA, $addr", (ins gprc:$rA, memri:$addr)>;
def SUBI : PPCAsmPseudo<"subi $rA, $rB, $imm",
(ins gprc:$rA, gprc:$rB, s16imm:$imm)>;
def SUBIS : PPCAsmPseudo<"subis $rA, $rB, $imm",
(ins gprc:$rA, gprc:$rB, s16imm:$imm)>;
def SUBIC : PPCAsmPseudo<"subic $rA, $rB, $imm",
(ins gprc:$rA, gprc:$rB, s16imm:$imm)>;
def SUBICo : PPCAsmPseudo<"subic. $rA, $rB, $imm",
(ins gprc:$rA, gprc:$rB, s16imm:$imm)>;
def : InstAlias<"sub $rA, $rB, $rC", (SUBF8 g8rc:$rA, g8rc:$rC, g8rc:$rB)>;
def : InstAlias<"sub. $rA, $rB, $rC", (SUBF8o g8rc:$rA, g8rc:$rC, g8rc:$rB)>;
def : InstAlias<"subc $rA, $rB, $rC", (SUBFC8 g8rc:$rA, g8rc:$rC, g8rc:$rB)>;
def : InstAlias<"subc. $rA, $rB, $rC", (SUBFC8o g8rc:$rA, g8rc:$rC, g8rc:$rB)>;
def EXTLWI : PPCAsmPseudo<"extlwi $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def EXTLWIo : PPCAsmPseudo<"extlwi. $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def EXTRWI : PPCAsmPseudo<"extrwi $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def EXTRWIo : PPCAsmPseudo<"extrwi. $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def INSLWI : PPCAsmPseudo<"inslwi $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def INSLWIo : PPCAsmPseudo<"inslwi. $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def INSRWI : PPCAsmPseudo<"insrwi $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def INSRWIo : PPCAsmPseudo<"insrwi. $rA, $rS, $n, $b",
(ins gprc:$rA, gprc:$rS, u5imm:$n, u5imm:$b)>;
def ROTRWI : PPCAsmPseudo<"rotrwi $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def ROTRWIo : PPCAsmPseudo<"rotrwi. $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def SLWI : PPCAsmPseudo<"slwi $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def SLWIo : PPCAsmPseudo<"slwi. $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def SRWI : PPCAsmPseudo<"srwi $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def SRWIo : PPCAsmPseudo<"srwi. $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def CLRRWI : PPCAsmPseudo<"clrrwi $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def CLRRWIo : PPCAsmPseudo<"clrrwi. $rA, $rS, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$n)>;
def CLRLSLWI : PPCAsmPseudo<"clrlslwi $rA, $rS, $b, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$b, u5imm:$n)>;
def CLRLSLWIo : PPCAsmPseudo<"clrlslwi. $rA, $rS, $b, $n",
(ins gprc:$rA, gprc:$rS, u5imm:$b, u5imm:$n)>;
def : InstAlias<"rotlwi $rA, $rS, $n", (RLWINM gprc:$rA, gprc:$rS, u5imm:$n, 0, 31)>;
def : InstAlias<"rotlwi. $rA, $rS, $n", (RLWINMo gprc:$rA, gprc:$rS, u5imm:$n, 0, 31)>;
def : InstAlias<"rotlw $rA, $rS, $rB", (RLWNM gprc:$rA, gprc:$rS, gprc:$rB, 0, 31)>;
def : InstAlias<"rotlw. $rA, $rS, $rB", (RLWNMo gprc:$rA, gprc:$rS, gprc:$rB, 0, 31)>;
def : InstAlias<"clrlwi $rA, $rS, $n", (RLWINM gprc:$rA, gprc:$rS, 0, u5imm:$n, 31)>;
def : InstAlias<"clrlwi. $rA, $rS, $n", (RLWINMo gprc:$rA, gprc:$rS, 0, u5imm:$n, 31)>;
def EXTLDI : PPCAsmPseudo<"extldi $rA, $rS, $n, $b",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n, u6imm:$b)>;
def EXTLDIo : PPCAsmPseudo<"extldi. $rA, $rS, $n, $b",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n, u6imm:$b)>;
def EXTRDI : PPCAsmPseudo<"extrdi $rA, $rS, $n, $b",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n, u6imm:$b)>;
def EXTRDIo : PPCAsmPseudo<"extrdi. $rA, $rS, $n, $b",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n, u6imm:$b)>;
def INSRDI : PPCAsmPseudo<"insrdi $rA, $rS, $n, $b",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n, u6imm:$b)>;
def INSRDIo : PPCAsmPseudo<"insrdi. $rA, $rS, $n, $b",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n, u6imm:$b)>;
def ROTRDI : PPCAsmPseudo<"rotrdi $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def ROTRDIo : PPCAsmPseudo<"rotrdi. $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def SLDI : PPCAsmPseudo<"sldi $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def SLDIo : PPCAsmPseudo<"sldi. $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def SRDI : PPCAsmPseudo<"srdi $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def SRDIo : PPCAsmPseudo<"srdi. $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def CLRRDI : PPCAsmPseudo<"clrrdi $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def CLRRDIo : PPCAsmPseudo<"clrrdi. $rA, $rS, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$n)>;
def CLRLSLDI : PPCAsmPseudo<"clrlsldi $rA, $rS, $b, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$b, u6imm:$n)>;
def CLRLSLDIo : PPCAsmPseudo<"clrlsldi. $rA, $rS, $b, $n",
(ins g8rc:$rA, g8rc:$rS, u6imm:$b, u6imm:$n)>;
def : InstAlias<"rotldi $rA, $rS, $n", (RLDICL g8rc:$rA, g8rc:$rS, u6imm:$n, 0)>;
def : InstAlias<"rotldi. $rA, $rS, $n", (RLDICLo g8rc:$rA, g8rc:$rS, u6imm:$n, 0)>;
def : InstAlias<"rotld $rA, $rS, $rB", (RLDCL g8rc:$rA, g8rc:$rS, gprc:$rB, 0)>;
def : InstAlias<"rotld. $rA, $rS, $rB", (RLDCLo g8rc:$rA, g8rc:$rS, gprc:$rB, 0)>;
def : InstAlias<"clrldi $rA, $rS, $n", (RLDICL g8rc:$rA, g8rc:$rS, 0, u6imm:$n)>;
def : InstAlias<"clrldi. $rA, $rS, $n", (RLDICLo g8rc:$rA, g8rc:$rS, 0, u6imm:$n)>;
// These generic branch instruction forms are used for the assembler parser only.
// Defs and Uses are conservative, since we don't know the BO value.
let PPC970_Unit = 7 in {
let Defs = [CTR], Uses = [CTR, RM] in {
def gBC : BForm_3<16, 0, 0, (outs),
(ins u5imm:$bo, crbitrc:$bi, condbrtarget:$dst),
"bc $bo, $bi, $dst">;
def gBCA : BForm_3<16, 1, 0, (outs),
(ins u5imm:$bo, crbitrc:$bi, abscondbrtarget:$dst),
"bca $bo, $bi, $dst">;
}
let Defs = [LR, CTR], Uses = [CTR, RM] in {
def gBCL : BForm_3<16, 0, 1, (outs),
(ins u5imm:$bo, crbitrc:$bi, condbrtarget:$dst),
"bcl $bo, $bi, $dst">;
def gBCLA : BForm_3<16, 1, 1, (outs),
(ins u5imm:$bo, crbitrc:$bi, abscondbrtarget:$dst),
"bcla $bo, $bi, $dst">;
}
let Defs = [CTR], Uses = [CTR, LR, RM] in
def gBCLR : XLForm_2<19, 16, 0, (outs),
(ins u5imm:$bo, crbitrc:$bi, i32imm:$bh),
"bclr $bo, $bi, $bh", BrB, []>;
let Defs = [LR, CTR], Uses = [CTR, LR, RM] in
def gBCLRL : XLForm_2<19, 16, 1, (outs),
(ins u5imm:$bo, crbitrc:$bi, i32imm:$bh),
"bclrl $bo, $bi, $bh", BrB, []>;
let Defs = [CTR], Uses = [CTR, LR, RM] in
def gBCCTR : XLForm_2<19, 528, 0, (outs),
(ins u5imm:$bo, crbitrc:$bi, i32imm:$bh),
"bcctr $bo, $bi, $bh", BrB, []>;
let Defs = [LR, CTR], Uses = [CTR, LR, RM] in
def gBCCTRL : XLForm_2<19, 528, 1, (outs),
(ins u5imm:$bo, crbitrc:$bi, i32imm:$bh),
"bcctrl $bo, $bi, $bh", BrB, []>;
}
def : InstAlias<"bclr $bo, $bi", (gBCLR u5imm:$bo, crbitrc:$bi, 0)>;
def : InstAlias<"bclrl $bo, $bi", (gBCLRL u5imm:$bo, crbitrc:$bi, 0)>;
def : InstAlias<"bcctr $bo, $bi", (gBCCTR u5imm:$bo, crbitrc:$bi, 0)>;
def : InstAlias<"bcctrl $bo, $bi", (gBCCTRL u5imm:$bo, crbitrc:$bi, 0)>;
multiclass BranchSimpleMnemonic1<string name, string pm, int bo> {
def : InstAlias<"b"#name#pm#" $bi, $dst", (gBC bo, crbitrc:$bi, condbrtarget:$dst)>;
def : InstAlias<"b"#name#"a"#pm#" $bi, $dst", (gBCA bo, crbitrc:$bi, abscondbrtarget:$dst)>;
def : InstAlias<"b"#name#"lr"#pm#" $bi", (gBCLR bo, crbitrc:$bi, 0)>;
def : InstAlias<"b"#name#"l"#pm#" $bi, $dst", (gBCL bo, crbitrc:$bi, condbrtarget:$dst)>;
def : InstAlias<"b"#name#"la"#pm#" $bi, $dst", (gBCLA bo, crbitrc:$bi, abscondbrtarget:$dst)>;
def : InstAlias<"b"#name#"lrl"#pm#" $bi", (gBCLRL bo, crbitrc:$bi, 0)>;
}
multiclass BranchSimpleMnemonic2<string name, string pm, int bo>
: BranchSimpleMnemonic1<name, pm, bo> {
def : InstAlias<"b"#name#"ctr"#pm#" $bi", (gBCCTR bo, crbitrc:$bi, 0)>;
def : InstAlias<"b"#name#"ctrl"#pm#" $bi", (gBCCTRL bo, crbitrc:$bi, 0)>;
}
defm : BranchSimpleMnemonic2<"t", "", 12>;
defm : BranchSimpleMnemonic2<"f", "", 4>;
defm : BranchSimpleMnemonic2<"t", "-", 14>;
defm : BranchSimpleMnemonic2<"f", "-", 6>;
defm : BranchSimpleMnemonic2<"t", "+", 15>;
defm : BranchSimpleMnemonic2<"f", "+", 7>;
defm : BranchSimpleMnemonic1<"dnzt", "", 8>;
defm : BranchSimpleMnemonic1<"dnzf", "", 0>;
defm : BranchSimpleMnemonic1<"dzt", "", 10>;
defm : BranchSimpleMnemonic1<"dzf", "", 2>;
multiclass BranchExtendedMnemonicPM<string name, string pm, int bibo> {
def : InstAlias<"b"#name#pm#" $cc, $dst",
(BCC bibo, crrc:$cc, condbrtarget:$dst)>;
def : InstAlias<"b"#name#pm#" $dst",
(BCC bibo, CR0, condbrtarget:$dst)>;
def : InstAlias<"b"#name#"a"#pm#" $cc, $dst",
(BCCA bibo, crrc:$cc, abscondbrtarget:$dst)>;
def : InstAlias<"b"#name#"a"#pm#" $dst",
(BCCA bibo, CR0, abscondbrtarget:$dst)>;
def : InstAlias<"b"#name#"lr"#pm#" $cc",
(BCLR bibo, crrc:$cc)>;
def : InstAlias<"b"#name#"lr"#pm,
(BCLR bibo, CR0)>;
def : InstAlias<"b"#name#"ctr"#pm#" $cc",
(BCCTR bibo, crrc:$cc)>;
def : InstAlias<"b"#name#"ctr"#pm,
(BCCTR bibo, CR0)>;
def : InstAlias<"b"#name#"l"#pm#" $cc, $dst",
(BCCL bibo, crrc:$cc, condbrtarget:$dst)>;
def : InstAlias<"b"#name#"l"#pm#" $dst",
(BCCL bibo, CR0, condbrtarget:$dst)>;
def : InstAlias<"b"#name#"la"#pm#" $cc, $dst",
(BCCLA bibo, crrc:$cc, abscondbrtarget:$dst)>;
def : InstAlias<"b"#name#"la"#pm#" $dst",
(BCCLA bibo, CR0, abscondbrtarget:$dst)>;
def : InstAlias<"b"#name#"lrl"#pm#" $cc",
(BCLRL bibo, crrc:$cc)>;
def : InstAlias<"b"#name#"lrl"#pm,
(BCLRL bibo, CR0)>;
def : InstAlias<"b"#name#"ctrl"#pm#" $cc",
(BCCTRL bibo, crrc:$cc)>;
def : InstAlias<"b"#name#"ctrl"#pm,
(BCCTRL bibo, CR0)>;
}
multiclass BranchExtendedMnemonic<string name, int bibo> {
defm : BranchExtendedMnemonicPM<name, "", bibo>;
defm : BranchExtendedMnemonicPM<name, "-", !add(bibo, 2)>;
defm : BranchExtendedMnemonicPM<name, "+", !add(bibo, 3)>;
}
defm : BranchExtendedMnemonic<"lt", 12>;
defm : BranchExtendedMnemonic<"gt", 44>;
defm : BranchExtendedMnemonic<"eq", 76>;
defm : BranchExtendedMnemonic<"un", 108>;
defm : BranchExtendedMnemonic<"so", 108>;
defm : BranchExtendedMnemonic<"ge", 4>;
defm : BranchExtendedMnemonic<"nl", 4>;
defm : BranchExtendedMnemonic<"le", 36>;
defm : BranchExtendedMnemonic<"ng", 36>;
defm : BranchExtendedMnemonic<"ne", 68>;
defm : BranchExtendedMnemonic<"nu", 100>;
defm : BranchExtendedMnemonic<"ns", 100>;
[PowerPC] Support compare mnemonics with implied CR0 Just like for branch mnemonics (where support was recently added), the assembler is supposed to support extended mnemonics for the compare instructions where no condition register is specified explicitly (and CR0 is assumed implicitly). This patch adds support for those extended compare mnemonics. Index: llvm-head/test/MC/PowerPC/ppc64-encoding-ext.s =================================================================== --- llvm-head.orig/test/MC/PowerPC/ppc64-encoding-ext.s +++ llvm-head/test/MC/PowerPC/ppc64-encoding-ext.s @@ -449,21 +449,37 @@ # CHECK: cmpdi 2, 3, 128 # encoding: [0x2d,0x23,0x00,0x80] cmpdi 2, 3, 128 +# CHECK: cmpdi 0, 3, 128 # encoding: [0x2c,0x23,0x00,0x80] + cmpdi 3, 128 # CHECK: cmpd 2, 3, 4 # encoding: [0x7d,0x23,0x20,0x00] cmpd 2, 3, 4 +# CHECK: cmpd 0, 3, 4 # encoding: [0x7c,0x23,0x20,0x00] + cmpd 3, 4 # CHECK: cmpldi 2, 3, 128 # encoding: [0x29,0x23,0x00,0x80] cmpldi 2, 3, 128 +# CHECK: cmpldi 0, 3, 128 # encoding: [0x28,0x23,0x00,0x80] + cmpldi 3, 128 # CHECK: cmpld 2, 3, 4 # encoding: [0x7d,0x23,0x20,0x40] cmpld 2, 3, 4 +# CHECK: cmpld 0, 3, 4 # encoding: [0x7c,0x23,0x20,0x40] + cmpld 3, 4 # CHECK: cmpwi 2, 3, 128 # encoding: [0x2d,0x03,0x00,0x80] cmpwi 2, 3, 128 +# CHECK: cmpwi 0, 3, 128 # encoding: [0x2c,0x03,0x00,0x80] + cmpwi 3, 128 # CHECK: cmpw 2, 3, 4 # encoding: [0x7d,0x03,0x20,0x00] cmpw 2, 3, 4 +# CHECK: cmpw 0, 3, 4 # encoding: [0x7c,0x03,0x20,0x00] + cmpw 3, 4 # CHECK: cmplwi 2, 3, 128 # encoding: [0x29,0x03,0x00,0x80] cmplwi 2, 3, 128 +# CHECK: cmplwi 0, 3, 128 # encoding: [0x28,0x03,0x00,0x80] + cmplwi 3, 128 # CHECK: cmplw 2, 3, 4 # encoding: [0x7d,0x03,0x20,0x40] cmplw 2, 3, 4 +# CHECK: cmplw 0, 3, 4 # encoding: [0x7c,0x03,0x20,0x40] + cmplw 3, 4 # FIXME: Trap mnemonics Index: llvm-head/lib/Target/PowerPC/PPCInstrInfo.td =================================================================== --- llvm-head.orig/lib/Target/PowerPC/PPCInstrInfo.td +++ llvm-head/lib/Target/PowerPC/PPCInstrInfo.td @@ -2201,3 +2201,12 @@ defm : BranchExtendedMnemonic<"ne", 68>; defm : BranchExtendedMnemonic<"nu", 100>; defm : BranchExtendedMnemonic<"ns", 100>; +def : InstAlias<"cmpwi $rA, $imm", (CMPWI CR0, gprc:$rA, s16imm:$imm)>; +def : InstAlias<"cmpw $rA, $rB", (CMPW CR0, gprc:$rA, gprc:$rB)>; +def : InstAlias<"cmplwi $rA, $imm", (CMPLWI CR0, gprc:$rA, u16imm:$imm)>; +def : InstAlias<"cmplw $rA, $rB", (CMPLW CR0, gprc:$rA, gprc:$rB)>; +def : InstAlias<"cmpdi $rA, $imm", (CMPDI CR0, g8rc:$rA, s16imm:$imm)>; +def : InstAlias<"cmpd $rA, $rB", (CMPD CR0, g8rc:$rA, g8rc:$rB)>; +def : InstAlias<"cmpldi $rA, $imm", (CMPLDI CR0, g8rc:$rA, u16imm:$imm)>; +def : InstAlias<"cmpld $rA, $rB", (CMPLD CR0, g8rc:$rA, g8rc:$rB)>; + git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184435 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-20 16:15:12 +00:00
def : InstAlias<"cmpwi $rA, $imm", (CMPWI CR0, gprc:$rA, s16imm:$imm)>;
def : InstAlias<"cmpw $rA, $rB", (CMPW CR0, gprc:$rA, gprc:$rB)>;
def : InstAlias<"cmplwi $rA, $imm", (CMPLWI CR0, gprc:$rA, u16imm:$imm)>;
def : InstAlias<"cmplw $rA, $rB", (CMPLW CR0, gprc:$rA, gprc:$rB)>;
def : InstAlias<"cmpdi $rA, $imm", (CMPDI CR0, g8rc:$rA, s16imm:$imm)>;
def : InstAlias<"cmpd $rA, $rB", (CMPD CR0, g8rc:$rA, g8rc:$rB)>;
def : InstAlias<"cmpldi $rA, $imm", (CMPLDI CR0, g8rc:$rA, u16imm:$imm)>;
def : InstAlias<"cmpld $rA, $rB", (CMPLD CR0, g8rc:$rA, g8rc:$rB)>;
def : InstAlias<"cmpi $bf, 0, $rA, $imm", (CMPWI crrc:$bf, gprc:$rA, s16imm:$imm)>;
def : InstAlias<"cmp $bf, 0, $rA, $rB", (CMPW crrc:$bf, gprc:$rA, gprc:$rB)>;
def : InstAlias<"cmpli $bf, 0, $rA, $imm", (CMPLWI crrc:$bf, gprc:$rA, u16imm:$imm)>;
def : InstAlias<"cmpl $bf, 0, $rA, $rB", (CMPLW crrc:$bf, gprc:$rA, gprc:$rB)>;
def : InstAlias<"cmpi $bf, 1, $rA, $imm", (CMPDI crrc:$bf, g8rc:$rA, s16imm:$imm)>;
def : InstAlias<"cmp $bf, 1, $rA, $rB", (CMPD crrc:$bf, g8rc:$rA, g8rc:$rB)>;
def : InstAlias<"cmpli $bf, 1, $rA, $imm", (CMPLDI crrc:$bf, g8rc:$rA, u16imm:$imm)>;
def : InstAlias<"cmpl $bf, 1, $rA, $rB", (CMPLD crrc:$bf, g8rc:$rA, g8rc:$rB)>;
multiclass TrapExtendedMnemonic<string name, int to> {
def : InstAlias<"td"#name#"i $rA, $imm", (TDI to, g8rc:$rA, s16imm:$imm)>;
def : InstAlias<"td"#name#" $rA, $rB", (TD to, g8rc:$rA, g8rc:$rB)>;
def : InstAlias<"tw"#name#"i $rA, $imm", (TWI to, gprc:$rA, s16imm:$imm)>;
def : InstAlias<"tw"#name#" $rA, $rB", (TW to, gprc:$rA, gprc:$rB)>;
}
defm : TrapExtendedMnemonic<"lt", 16>;
defm : TrapExtendedMnemonic<"le", 20>;
defm : TrapExtendedMnemonic<"eq", 4>;
defm : TrapExtendedMnemonic<"ge", 12>;
defm : TrapExtendedMnemonic<"gt", 8>;
defm : TrapExtendedMnemonic<"nl", 12>;
defm : TrapExtendedMnemonic<"ne", 24>;
defm : TrapExtendedMnemonic<"ng", 20>;
defm : TrapExtendedMnemonic<"llt", 2>;
defm : TrapExtendedMnemonic<"lle", 6>;
defm : TrapExtendedMnemonic<"lge", 5>;
defm : TrapExtendedMnemonic<"lgt", 1>;
defm : TrapExtendedMnemonic<"lnl", 5>;
defm : TrapExtendedMnemonic<"lng", 6>;
defm : TrapExtendedMnemonic<"u", 31>;