put each major step in a separate function. This makes the high
level sequence of events easier to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55385 91177308-0d34-0410-b5e6-96231b3b80d8
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55219 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in FastISelEmitter.cpp, and make FastISel
subtarget aware. Among other things, this lets it work
properly on x86 targets that don't have SSE, where it
successfully selects x87 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55156 91177308-0d34-0410-b5e6-96231b3b80d8
class hold a MachineRegisterInfo member, and make the
MachineBasicBlock be passed in to SelectInstructions rather
than the FastISel constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55076 91177308-0d34-0410-b5e6-96231b3b80d8
subregister query, and by increasing the size of the subregister hashtable so
that there are fewer collisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54781 91177308-0d34-0410-b5e6-96231b3b80d8
the comments in FastISelEmitter.cpp for details on what this is.
This is currently experimental and unusable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54751 91177308-0d34-0410-b5e6-96231b3b80d8
to different address spaces. This alters the naming scheme for those
intrinsics, e.g., atomic.load.add.i32 => atomic.load.add.i32.p0i32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54195 91177308-0d34-0410-b5e6-96231b3b80d8
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53728 91177308-0d34-0410-b5e6-96231b3b80d8
getTargetNode and SelectNodeTo to reduce duplication, and to
make some of the getTargetNode code available to SelectNodeTo.
Use SelectNodeTo instead of getTargetNode in several new
interesting cases, as it mutates nodes in place instead of
creating new ones.
This triggers some scheduling behavior differences due to nodes
being presented to the scheduler in a different order. Some of the
arbitrary scheduling decisions it makes are now arbitrarily made
differently. This is visible in CodeGen/PowerPC/LargeAbsoluteAddr.ll,
where a trivial scheduling difference led to a trivial register
allocation difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53203 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG::SelectNodeTo in the instruction selector. This
updates existing nodes in place instead of creating new ones.
Go back to selecting ISD::DBG_LABEL nodes into
TargetInstrInfo::DBG_LABEL nodes instead of leaving them
unselected, now that SelectNodeTo allows us to update them
in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53057 91177308-0d34-0410-b5e6-96231b3b80d8
- Use a more accurate heuristic for the size of the hashtable.
- Use bitwise and instead of modulo since the size is a power of two.
- Use new[] instead of malloc().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52951 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
and fix the bug that it uncovers: inlining a pattern fragment could bring
in other pattern fragments if the inlinee hadn't already been inlined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52888 91177308-0d34-0410-b5e6-96231b3b80d8
<16 x float> is 64-byte aligned (for some reason),
which gets us into the stack realignment code. The
computation changing FP-relative offsets to SP-relative
was broken, assiging a spill temp to a location
also used for parameter passing. This
fixes it by rounding up the stack frame to a multiple
of the largest alignment (I concluded it wasn't fixable
without doing this, but I'm not very sure.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52750 91177308-0d34-0410-b5e6-96231b3b80d8
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52706 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
in DAGISelEmitter output. This bug was recently uncovered by the
addition of patterns for CALL32m and CALL64m, which are nodes
that now have both MemOperands and variadic_ops.
This bug was especially visible with PIC in various configurations,
because the new patterns are matching the indirect call code used
in many PIC configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51877 91177308-0d34-0410-b5e6-96231b3b80d8
index for the input pattern in terms of the output pattern. Instead
keep track of how many fixed operands the input pattern actually
has, and have the input matching code pass the output-emitting
function that index value. This simplifies the code, disentangles
variables_ops from the support for predication operations, and
makes variable_ops more robust.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51808 91177308-0d34-0410-b5e6-96231b3b80d8
It can be handy to have all information about options gathered in a single place
to provide an overview of all supported options. This patch allows the following:
def Options : OptionList<[
(switch_option "E", (help "Help string")),
(alias_option "quiet", "q")
...
]>;
Tool-specific option properties (like 'append_cmd') have (obviously) no meaning in
this context, so the only properties that are allowed are 'help' and 'required'.
See usage example in examples/Clang.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51754 91177308-0d34-0410-b5e6-96231b3b80d8
The following is now allowed:
(case (not_empty "o"), do_something, ...)
This didn't work previously because "-o" is built-in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51751 91177308-0d34-0410-b5e6-96231b3b80d8
The following is now legal:
(case (in_language "c"),
(case (switch_on "E"), "gcc -x c -E $INFILE", (default), "gcc -x c $INFILE"),
(default),
"gcc $INFILE $OUTFILE")
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51748 91177308-0d34-0410-b5e6-96231b3b80d8
For instance, the following command:
llvmc2 -E hello.c
now generates a file with the correct suffix (hello.i).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51733 91177308-0d34-0410-b5e6-96231b3b80d8
Used like this: (cmd_line "$CALL(MyHook) --option -o $ENV(VARIABLE) $CALL(AnotherHook)")
Also works with case expressions.
Hook declarations are auto-generated, the definitions should be provided by the user
(just drop a .cpp file in the tools/llvmc2 directory).
Hooks should live in the "hooks" namespace and have type std::string hooks::Hook(void).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51732 91177308-0d34-0410-b5e6-96231b3b80d8
cases due to an isel deficiency already noted in
lib/Target/X86/README.txt, but they can be matched in this fold-call.ll
testcase, for example.
This is interesting mainly because it exposes a tricky tblgen bug;
tblgen was incorrectly computing the starting index for variable_ops
in the case of a complex pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51706 91177308-0d34-0410-b5e6-96231b3b80d8
definitions. This adds a new construct, "discard", for indicating
that a named node in the input matching pattern is to be discarded,
instead of corresponding to a node in the output pattern. This
allows tblgen to know where the arguments for the varaible_ops are
supposed to begin.
This fixes "rdar://5791600", whatever that is ;-).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51699 91177308-0d34-0410-b5e6-96231b3b80d8
instruction to execute. This can be used for transformations (like two-address
conversion) to remat an instruction instead of generating a "move"
instruction. The idea is to decrease the live ranges and register pressure and
all that jazz.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51660 91177308-0d34-0410-b5e6-96231b3b80d8
DAG instruction selectors. Introudce a dedicated header file for this part:
include/llvm/CodeGen/DAGISelHeader.h
TableGen now only generates the include preprocessor directive to include this
new header.
This is a preparation for supporting multiple implementations of instruction
selectors in the future.
Reviewed and approved by Evan and Dan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51102 91177308-0d34-0410-b5e6-96231b3b80d8
Makes it possible to use options with names like "Wa,".
Also fixes the -Wall option handling as a side-effect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50973 91177308-0d34-0410-b5e6-96231b3b80d8
string began at a power of 2 in the string index. For example, if "ret" started
at position 16, the ret instruction would be assigned code 16, but the mask would be AsmChars[] + Code & 15, not Code & 31.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49433 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenDAGPatterns, where it can be used in other tablegen backends.
This allows the inference to be done for DAGISelEmitter so that it
gets accurate mayLoad/mayStore/isSimpleLoad flags.
This brings MemOperand functionality back to where it was before
48329. However, it doesn't solve the problem of anonymous patterns
which expand to code that does loads or stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49123 91177308-0d34-0410-b5e6-96231b3b80d8
start of a filename, not a filename+length. All clients can produce a
null terminated name, and the system api's require null terminated
strings anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49041 91177308-0d34-0410-b5e6-96231b3b80d8
on ideas mentioned in PR686.
Written by Mikhail Glushenkov and contributed by Codedgers, Inc.
Old llvmc will be removed soon after new one will have all its properties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48699 91177308-0d34-0410-b5e6-96231b3b80d8
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48640 91177308-0d34-0410-b5e6-96231b3b80d8
Note: the coalescer will have to be careful about this too, when it starts coalescing insert_subreg nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48329 91177308-0d34-0410-b5e6-96231b3b80d8
field to 32 bits, thus enabling correct handling of ByVal
structs bigger than 0x1ffff. Abstract interface a bit.
Fixes gcc.c-torture/execute/pr23135.c and
gcc.c-torture/execute/pr28982b.c in gcc testsuite (were ICE'ing
on ppc32, quietly producing wrong code on x86-32.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48122 91177308-0d34-0410-b5e6-96231b3b80d8
were being pruned in patterns where a variable was used more than once, e.g.:
(or (and R32C:$rA, R32C:$rC), (and R32C:$rB, (not R32C:$rC)))
In this example, $rC is used more than once and is actually significant to
instruction selection pattern matching when commuted variants are produced.
This patch scans the pattern's clauses and collects the variables, creating
a set of variables that are used more than once. TreePatternNode::isIsomorphicTo()
also understands that multiply-used variables are significant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47950 91177308-0d34-0410-b5e6-96231b3b80d8
%r3 on PPC) in their ASM files. However, it's hard for humans to read
during debugging. Adding a new field to the register data that lets you
specify a different name to be printed than the one that goes into the
ASM file -- %x3 instead of %r3, for instance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47534 91177308-0d34-0410-b5e6-96231b3b80d8
tblgen will complain if a sign-extended constant does not fit into a
data type smaller than i32, e.g., i16. This causes a problem when certain
hex constants are used, such as 0xff for byte masks or immediate xor
values.
tblgen will try the sign-extended value first and, if the sign extended
value would overflow, it tries to see if the unsigned value will fit.
Consequently, a software developer can now safely incant:
(XORHIr16 R16C:$rA, 0xffff)
which is somewhat clearer and more informative than incanting:
(XORHIr16 R16C:$rA, (i16 -1))
even if the two are bitwise equivalent.
Tblgen also outputs the 64-bit unsigned constant in the generated ISel code
when getTargetConstant() is invoked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47188 91177308-0d34-0410-b5e6-96231b3b80d8
it follows the order of the enum, not alphabetical.
The motivation is to make -mattr=+ssse3,+sse41
select SSE41 as it ought to. Added "ignored"
enum values of 0 to PPC and SPU to avoid compiler
warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47143 91177308-0d34-0410-b5e6-96231b3b80d8
1) ConstantFP is now expand by default
2) ConstantFP is not turned into TargetConstantFP during Legalize
if it is legal.
This allows ConstantFP to be handled like Constant, allowing for
targets that can encode FP immediates as MachineOperands.
As a bonus, fix up Itanium FP constants, which now correctly match,
and match more constants! Hooray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47121 91177308-0d34-0410-b5e6-96231b3b80d8
initializer problem, a minor tweak to the way the
DAGISelEmitter finds load/store nodes, and a renaming of the
new PseudoSourceValue objects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46827 91177308-0d34-0410-b5e6-96231b3b80d8
DAGUpdateListener object pointer instead of just returning a vector
of deleted nodes. This makes the interfaces more efficient (no more
allocating a vector [at least a malloc], filling it in, then walking
it) and more clean. This also allows the client to be notified of
nodes that are *changed* but not deleted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46677 91177308-0d34-0410-b5e6-96231b3b80d8
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46659 91177308-0d34-0410-b5e6-96231b3b80d8
the pattern when generating matchin code.
The first (and currently, only) attribute causes the immediate parent node of the ComplexPattern operand to be passed into the matching code rather than the node at the root of the entire DAG containing the pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46606 91177308-0d34-0410-b5e6-96231b3b80d8
in the backend. Introduce a new SDNode type, MemOperandSDNode, for
holding a MemOperand in the SelectionDAG IR, and add a MemOperand
list to MachineInstr, and code to manage them. Remove the offset
field from SrcValueSDNode; uses of SrcValueSDNode that were using
it are all all using MemOperandSDNode now.
Also, begin updating some getLoad and getStore calls to use the
PseudoSourceValue objects.
Most of this was written by Florian Brander, some
reorganization and updating to TOT by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46585 91177308-0d34-0410-b5e6-96231b3b80d8
both work right according to the new flags.
This removes the TII::isReallySideEffectFree predicate, and adds
TII::isInvariantLoad.
It removes NeverHasSideEffects+MayHaveSideEffects and adds
UnmodeledSideEffects as machine instr flags. Now the clients
can decide everything they need.
I think isRematerializable can be implemented in terms of the
flags we have now, though I will let others tackle that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45843 91177308-0d34-0410-b5e6-96231b3b80d8
x86 backend where instructions were not marked maystore/mayload, and perf issues where
instructions were not marked neverHasSideEffects. It would be really nice if we could
write patterns for copy instructions.
I have audited all the x86 instructions down to MOVDQAmr. The flags on others and on
other targets are probably not right in all cases, but no clients currently use this
info that are enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45829 91177308-0d34-0410-b5e6-96231b3b80d8
all clients over to using predicates instead of these flags directly.
These are now private values which are only to be used to statically
initialize the tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45692 91177308-0d34-0410-b5e6-96231b3b80d8
TargetInstrDescriptor class and shrink to 16-bits, saving a
word in TargetInstrDescriptor. Add some comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45686 91177308-0d34-0410-b5e6-96231b3b80d8
over to using them, instead of diddling Flags directly. Change the
various flags from const variables to enums.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45677 91177308-0d34-0410-b5e6-96231b3b80d8
instead of "ISD::STORE". This allows us to mark target-specific dag
nodes as storing (such as ppc byteswap stores). This allows us to remove
more explicit isStore flags from the .td files.
Finally, add a warning for when a .td file contains an explicit
isStore and tblgen is able to infer it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45654 91177308-0d34-0410-b5e6-96231b3b80d8
occured in a pattern, but failed miserably. The new code works for
any instruction that has a store in its pattern, including all the
x86 mem op mem instructions.
The only target-independent code that uses this is branch folding,
so this won't change anything in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45648 91177308-0d34-0410-b5e6-96231b3b80d8
out, DAGISelEmitter can compute it in its ctor, which simplifies some code.
Now we can use CodegenDAGPatterns in other parts of tblgen that want access
to dag pattern info, woo!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45636 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference in output is that we now print them in alphabetical
order instead of reverse alphabetical order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45635 91177308-0d34-0410-b5e6-96231b3b80d8
Split the pattern parsing code out from the dag isel emitter into it's own file.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45632 91177308-0d34-0410-b5e6-96231b3b80d8
throw exceptions", just mark intrinsics with the nounwind
attribute. Likewise, mark intrinsics as readnone/readonly
and get rid of special aliasing logic (which didn't use
anything more than this anyway).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44544 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the parser much easier to understand, eliminates a ton of global variables,
and gives tblgen nice caret diagnostics. It is also faster, but tblgen probably doesn't
care about performance.
There are a couple of FIXMEs which I will take care of next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44274 91177308-0d34-0410-b5e6-96231b3b80d8
I added the lexing files to the VStudio projects and removed the .l files from the
VStudio projects. There was a problem with use of strtoll in TGLexer.cpp and Chris
suggested switching to strtol, so that's included here.
Additionally, this checkin adds minimal x64 builds to the VStudio builds. Build issues
related to x64 in the windows specific files for DynamicLibrary.inc and Singals.inc
are worked around, but not ultimately solved. Binaries used to be stored in
...\win32\{Debug|Release}
but are now kept in
...\win32\bin\{win32|x64}\{Debug|Release}
intermediate files will continue to be stored in the individual project directories under
win32.
Some names will likely change in the future to reflect that the vstudio projects
are no longer 32-bit only, but I wanted to get things up and running today so kept away
from bigger restructuring.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44260 91177308-0d34-0410-b5e6-96231b3b80d8
in favour of teaching CCAssignToStack that size 0 and/or align
0 means to use the ABI values. This seems a neater solution.
It is safe since no legal value type has size 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44107 91177308-0d34-0410-b5e6-96231b3b80d8
to use different mappings for EH and debug info;
no functional change yet.
Fix warning in X86CodeEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44056 91177308-0d34-0410-b5e6-96231b3b80d8
This makes DwarfRegNum to accept list of numbers instead.
Added three different "flavours", but only slightly tested on x86-32/linux.
Please check another subtargets if possible,
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43997 91177308-0d34-0410-b5e6-96231b3b80d8
dealing with types whose size & alignment are
different on different subtargets. Use it for x86 f80.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43988 91177308-0d34-0410-b5e6-96231b3b80d8
the one that takes an operand list instead of explicit
operands. There is one left though, the more interesting
one :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43290 91177308-0d34-0410-b5e6-96231b3b80d8
take a deleted nodes vector, instead of requiring it.
One more significant change: Implement the start of a legalizer that
just works on types. This legalizer is designed to run before the
operation legalizer and ensure just that the input dag is transformed
into an output dag whose operand and result types are all legal, even
if the operations on those types are not.
This design/impl has the following advantages:
1. When finished, this will *significantly* reduce the amount of code in
LegalizeDAG.cpp. It will remove all the code related to promotion and
expansion as well as splitting and scalarizing vectors.
2. The new code is very simple, idiomatic, and modular: unlike
LegalizeDAG.cpp, it has no 3000 line long functions. :)
3. The implementation is completely iterative instead of recursive, good
for hacking on large dags without blowing out your stack.
4. The implementation updates nodes in place when possible instead of
deallocating and reallocating the entire graph that points to some
mutated node.
5. The code nicely separates out handling of operations with invalid
results from operations with invalid operands, making some cases
simpler and easier to understand.
6. The new -debug-only=legalize-types option is very very handy :),
allowing you to easily understand what legalize types is doing.
This is not yet done. Until the ifdef added to SelectionDAGISel.cpp is
enabled, this does nothing. However, this code is sufficient to legalize
all of the code in 186.crafty, olden and freebench on an x86 machine. The
biggest issues are:
1. Vectors aren't implemented at all yet
2. SoftFP is a mess, I need to talk to Evan about it.
3. No lowering to libcalls is implemented yet.
4. Various operations are missing etc.
5. There are FIXME's for stuff I hax0r'd out, like softfp.
Hey, at least it is a step in the right direction :). If you'd like to help,
just enable the #ifdef in SelectionDAGISel.cpp and compile code with it. If
this explodes it will tell you what needs to be implemented. Help is
certainly appreciated.
Once this goes in, we can do three things:
1. Add a new pass of dag combine between the "type legalizer" and "operation
legalizer" passes. This will let us catch some long-standing isel issues
that we miss because operation legalization often obfuscates the dag with
target-specific nodes.
2. We can rip out all of the type legalization code from LegalizeDAG.cpp,
making it much smaller and simpler. When that happens we can then
reimplement the core functionality left in it in a much more efficient and
non-recursive way.
3. Once the whole legalizer is non-recursive, we can implement whole-function
selectiondags maybe...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42981 91177308-0d34-0410-b5e6-96231b3b80d8
1.
[(set GR32:$dst, (add GR32:$src1, GR32:$src2)),
(modify EFLAGS)]
This indicates the source pattern expects the instruction would produce 2 values. The first is the result of the addition. The second is an implicit definition in register EFLAGS.
2.
def : Pat<(parallel (addc GR32:$src1, GR32:$src2), (modify EFLAGS)), ()>
Similar to #1 except this is used for def : Pat patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41897 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes two things. One is a pair of VStudio compiler errors stemming from variables
which defined within the for loop statement and also within the body of the for loop. I fixed these
by renaming one of the two variables. Additionally, I've made the Function*->ExFunc map in
ExternalFunctions.cpp a ManagedStatic object, so that cleanup will be done on llvm_shutdown. In repeated
uses of the interpreter, where the same Function* address may get used for completely differnet functions,
this was causing a crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40558 91177308-0d34-0410-b5e6-96231b3b80d8
instruction flag, and use the flag along with a virtual member function
hook for targets to override if there are instructions that are only
trivially rematerializable with specific operands (i.e. constant pool
loads).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37728 91177308-0d34-0410-b5e6-96231b3b80d8
with a general target hook to identify rematerializable instructions. Some
instructions are only rematerializable with specific operands, such as loads
from constant pools, while others are always rematerializable. This hook
allows both to be identified as being rematerializable with the same
mechanism.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37644 91177308-0d34-0410-b5e6-96231b3b80d8
types of the iAny types involved in the overloaded intrinsic. Thus, we
can't use the argument number as the index but have to count them separately
in order to index Tys correctly. This patch rectifies this situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37296 91177308-0d34-0410-b5e6-96231b3b80d8
feature is set, then the features in the implied list should be set also.
The opposite is also enforced: if a feature in the implied list isn't set,
then the feature that owns that implies list shouldn't be set either.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36756 91177308-0d34-0410-b5e6-96231b3b80d8
