the loop predecessors.
The register can be live-out from a predecessor without being live-in to the
loop header if there is a critical edge from the predecessor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122123 91177308-0d34-0410-b5e6-96231b3b80d8
createMachineVerifierPass and MachineFunction::verify.
The banner is printed before the machine code dump, just like the printer pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122113 91177308-0d34-0410-b5e6-96231b3b80d8
RegAllocBase::VerifyEnabled.
Run the machine code verifier in a few interesting places during RegAllocGreedy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122107 91177308-0d34-0410-b5e6-96231b3b80d8
The heuristics split around the largest loop where the current register may be
allocated without interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122106 91177308-0d34-0410-b5e6-96231b3b80d8
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122104 91177308-0d34-0410-b5e6-96231b3b80d8
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122102 91177308-0d34-0410-b5e6-96231b3b80d8
the operand uses the same register as a tied operand:
%r1 = add %r1, %r1
If add were a three-address instruction, kill flags would be required on at
least one of the uses. Since it is a two-address instruction, the tied use
operand must not have a kill flag.
This change makes the kill flag on the untied use operand optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122082 91177308-0d34-0410-b5e6-96231b3b80d8
This is a three-way interval list intersection between a virtual register, a
live interval union, and a loop. It will be used to identify interference-free
loops for live range splitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122034 91177308-0d34-0410-b5e6-96231b3b80d8
live range splitting around loops guided by register pressure.
So far, trySplit() simply prints a lot of debug output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121918 91177308-0d34-0410-b5e6-96231b3b80d8
A MachineLoopRange contains the intervals of slot indexes covered by the blocks
in a loop. This representation of the loop blocks is more efficient to compare
against interfering registers during register coalescing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121917 91177308-0d34-0410-b5e6-96231b3b80d8
Bypass loops have the current live range live through, but contain no uses or
defs. Splitting around a bypass loop can free registers for other uses inside
the loop by spilling the split range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121871 91177308-0d34-0410-b5e6-96231b3b80d8
regB = move RCX
regA = op regB, regC
RAX = move regA
where both regB and regC are killed. If regB is constrainted to non-compatible
physical registers but regC is not constrainted at all, then it's better to
commute the instruction.
movl %edi, %eax
shlq $32, %rcx
leaq (%rcx,%rax), %rax
=>
movl %edi, %eax
shlq $32, %rcx
orq %rcx, %rax
rdar://8762995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121793 91177308-0d34-0410-b5e6-96231b3b80d8
spill weight. Filter out fixed registers instead.
Add support for reassigning an interference that was assigned to an alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121737 91177308-0d34-0410-b5e6-96231b3b80d8
when the wider type is legal. This allows us to compile:
define zeroext i16 @test1(i16 zeroext %x) nounwind {
entry:
%div = udiv i16 %x, 33
ret i16 %div
}
into:
test1: # @test1
movzwl 4(%esp), %eax
imull $63551, %eax, %eax # imm = 0xF83F
shrl $21, %eax
ret
instead of:
test1: # @test1
movw $-1985, %ax # imm = 0xFFFFFFFFFFFFF83F
mulw 4(%esp)
andl $65504, %edx # imm = 0xFFE0
movl %edx, %eax
shrl $5, %eax
ret
Implementing rdar://8760399 and example #4 from:
http://blog.regehr.org/archives/320
We should implement the same thing for [su]mul_hilo, but I don't
have immediate plans to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121696 91177308-0d34-0410-b5e6-96231b3b80d8
for each constant pool entry. Using WriteTypeSymbolic here takes time
proportional to the size of the module, for each constant pool entry.
This speeds up -verbose-asm llc on 252.eon (a random testcase at my disposal)
from 4.4s to 2.137s. llc takes 2.11s with asm-verbose off, so this is now a
pretty reasonable cost for verbose comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121691 91177308-0d34-0410-b5e6-96231b3b80d8
catch this here rather than later after accessing uninitialized memory
etc. Fires when compiling the testcase in PR8237.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121635 91177308-0d34-0410-b5e6-96231b3b80d8
The spiller should only spill. The register allocator will drive live range
splitting, it has the needed information about register pressure and
interferences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121590 91177308-0d34-0410-b5e6-96231b3b80d8
registers for a given virtual register.
Reserved registers are filtered from the allocation order, and any valid hint is
returned as the first suggestion.
For target dependent hints, a number of arcane target hooks are invoked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121497 91177308-0d34-0410-b5e6-96231b3b80d8
references instead.
Similarly, IntervalMap::begin() is almost as expensive as find(), so use find(x)
instead of begin().advanceTo(x);
This makes RegAllocBasic run another 5% faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121344 91177308-0d34-0410-b5e6-96231b3b80d8
abstract priority queue interface in subclasses that want to override the
priority calculations.
Subclasses must provide a getPriority() implementation instead.
This approach requires less code as long as priorities are expressable as simple
floats, and it avoids the dangers of defining potentially expensive priority
comparison functions.
It also should speed up priority_queue operations since they no longer have to
chase pointers when comparing registers. This is not measurable, though.
Preferably, we shouldn't use floats to guide code generation. The use of floats
here is derived from the use of floats for spill weights. Spill weights have a
dynamic range that doesn't lend itself easily to a fixpoint implementation.
When someone invents a stable spill weight representation, it can be reused for
allocation priorities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121294 91177308-0d34-0410-b5e6-96231b3b80d8
both forward and backward scheduling. Rename it to
ScoreboardHazardRecognizer (Scoreboard is one word). Remove integer
division from the scoreboard's critical path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121274 91177308-0d34-0410-b5e6-96231b3b80d8
This new register allocator is initially identical to RegAllocBasic, but it will
receive all of the tricks that RegAllocBasic won't get.
RegAllocGreedy will eventually replace linear scan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121234 91177308-0d34-0410-b5e6-96231b3b80d8
Minor optimization to the use of IntervalMap iterators. They are fairly
heavyweight, so prefer SI.valid() over SI != end().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121217 91177308-0d34-0410-b5e6-96231b3b80d8
zextOrTrunc(), and APSInt methods extend(), extOrTrunc() and new method
trunc(), to be const and to return a new value instead of modifying the
object in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121120 91177308-0d34-0410-b5e6-96231b3b80d8
as llc + llvm-mc. This time ELF is not changed and I tested that llvm-gcc
bootstrap on darwin10 using darwin9's assembler and linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121006 91177308-0d34-0410-b5e6-96231b3b80d8
time, this method existed, but now PHIElimination uses the method of the same
name on MachineBasicBlock.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120952 91177308-0d34-0410-b5e6-96231b3b80d8
The StrongPHIElimination pass did not work, and nobody has worked on it for two
years.
A rewrite is underway, so I am leaving this shell pass instead of deleting it
completely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120830 91177308-0d34-0410-b5e6-96231b3b80d8
Scan the MachineFunction for DBG_VALUE instructions, and replace them with a
data structure similar to LiveIntervals. The live range of a DBG_VALUE is
determined by propagating it down the dominator tree until a new DBG_VALUE is
found. When a DBG_VALUE lives in a register, its live range is confined to the
live range of the register's value.
LiveDebugVariables runs before coalescing, so DBG_VALUEs are not artificially
extended when registers are joined.
The missing half will recreate DBG_VALUE instructions from the intervals when
register allocation is complete.
The pass is disabled by default. It can be enabled with the temporary command
line option -live-debug-variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120636 91177308-0d34-0410-b5e6-96231b3b80d8
legalization time. Since at legalization time there is no mapping from
SDNode back to the corresponding LLVM instruction and the return
SDNode is target specific, this requires a target hook to check for
eligibility. Only x86 and ARM support this form of sibcall optimization
right now.
rdar://8707777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120501 91177308-0d34-0410-b5e6-96231b3b80d8
in favor of the widespread llvm style. Capitalize variables and add
newlines for visual parsing. Rename variables for readability.
And other cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120490 91177308-0d34-0410-b5e6-96231b3b80d8
This analysis is going to run immediately after LiveIntervals. It will stay
alive during register allocation and keep track of user variables mentioned in
DBG_VALUE instructions.
When the register allocator is moving values between registers and the stack, it
is very hard to keep track of DBG_VALUE instructions. We usually get it wrong.
This analysis maintains a data structure that makes it easy to update DBG_VALUE
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120385 91177308-0d34-0410-b5e6-96231b3b80d8
so don't claim they are. They are allocated using DAG.getNode, so attempts
to access MemSDNode fields results in reading off the end of the allocated
memory. This fixes crashes with "llc -debug" due to debug code trying to
print MemSDNode fields for these barrier nodes (since the crashes are not
deterministic, use valgrind to see this). Add some nasty checking to try
to catch this kind of thing in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119901 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine from making an illegal transformation of bitcast of a scalar to a
vector into a scalar_to_vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119819 91177308-0d34-0410-b5e6-96231b3b80d8
MCStreamer instead of just MCObjectStreamer. Address changes cannot
be as efficient as we have to use DW_LNE_set_addres, but at least
most of the logic is shared.
This will be used so that, with CodeGen still using EmitDwarfLocDirective,
llvm-gcc is able to produce debug_line sections without needing an
assembler that supports .loc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119777 91177308-0d34-0410-b5e6-96231b3b80d8
if the extension types were not the same. The result was that if you
fed a select with sext and zext loads, as in the testcase, then it
would get turned into a zext (or sext) of the select, which is wrong
in the cases when it should have been an sext (resp. zext). Reported
and diagnosed by Sebastien Deldon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119728 91177308-0d34-0410-b5e6-96231b3b80d8
and testing is easier. A good example is the unknown-location.ll test that
now can just look for ".loc 1 0 0". We also don't use a DW_LNE_set_address for
every address change anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119613 91177308-0d34-0410-b5e6-96231b3b80d8
memset; we may need it to decide between MOVAPS and MOVUPS
later. Adjust a test that was looking for wrong code.
PR 3866 / 8675131.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119605 91177308-0d34-0410-b5e6-96231b3b80d8
and xor. The 32-bit move immediates can be hoisted out of loops by machine
LICM but the isel hacks were preventing them.
Instead, let peephole optimization pass recognize registers that are defined by
immediates and the ARM target hook will fold the immediates in.
Other changes include 1) do not fold and / xor into cmp to isel TST / TEQ
instructions if there are multiple uses. This happens when the 'and' is live
out, machine sink would have sinked the computation and that ends up pessimizing
code. The peephole pass would recognize situations where the 'and' can be
toggled to define CPSR and eliminate the comparison anyway.
2) Move peephole pass to after machine LICM, sink, and CSE to avoid blocking
important optimizations.
rdar://8663787, rdar://8241368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119548 91177308-0d34-0410-b5e6-96231b3b80d8
SrcMgrDiagHandler, we can improve clang diagnostics for inline asm:
instead of reporting them on a source line of the original line,
we can report it on the correct line wherever the string literal came
from. For something like this:
void foo() {
asm("push %rax\n"
".code32\n");
}
we used to get this: (note that the line in t.c isn't helpful)
t.c:4:7: error: warning: ignoring directive for now
asm("push %rax\n"
^
<inline asm>:2:1: note: instantiated into assembly here
.code32
^
now we get:
t.c:5:8: error: warning: ignoring directive for now
".code32\n"
^
<inline asm>:2:1: note: instantiated into assembly here
.code32
^
Note that we're pointing to line 5 properly now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119488 91177308-0d34-0410-b5e6-96231b3b80d8
cookie argument to the SourceMgr diagnostic stuff. This cleanly separates
LLVMContext's inlineasm handler from the sourcemgr error handling
definition, increasing type safety and cleaning things up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119486 91177308-0d34-0410-b5e6-96231b3b80d8
easier to debug, and to avoid complications when the CFG changes
in the middle of the instruction selection process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119382 91177308-0d34-0410-b5e6-96231b3b80d8
Always spill the full representative register at any point where any subregister
is live.
This fixes PR8620 which caused the old logic to get confused and not spill
anything at all.
The fundamental problem here is that the coalescer is too aggressive about
physical register coalescing. It sometimes makes it impossible to allocate
registers without these emergency spills.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119375 91177308-0d34-0410-b5e6-96231b3b80d8
Use amazing new function call technology instead of writing identical code in
multiple places.
This fixes PR8604.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119306 91177308-0d34-0410-b5e6-96231b3b80d8
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.
Except when it is an early clobber tied to a use operand. Then it starts at the
def slot like a standard def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119305 91177308-0d34-0410-b5e6-96231b3b80d8
live ranges for the spill register are also defined at the use slot instead of
the normal def slot.
This fixes PR8612 for the inline spiller. A use was being allocated to the same
register as a spilled early clobber def.
This problem exists in all the spillers. A fix for the standard spiller is
forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119182 91177308-0d34-0410-b5e6-96231b3b80d8
since it is trivial and will be shared between ppc and x86.
This substantially simplifies the X86 backend also.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119089 91177308-0d34-0410-b5e6-96231b3b80d8
catastrophic compilation time in the event of unreasonable LLVM
IR. Code quality is a separate issue--someone upstream needs to do a
better job of reducing to llvm.memcpy. If the situation can be reproduced with
any supported frontend, then it will be a separate bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118904 91177308-0d34-0410-b5e6-96231b3b80d8
it makes no sense for allocation_order iterators to visit reserved regs.
The inline spiller depends on AliasAnalysis.
Manage the Query state to avoid uninitialized or stale results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118800 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first small step towards using closed intervals for liveness instead
of the half-open intervals we're using now.
We want to be able to distinguish between a SlotIndex that represents a variable
being live-out of a basic block, and an index representing a variable live-in to
its successor.
That requires two separate indexes between blocks. One for live-outs and one for
live-ins.
With this change, getMBBEndIdx(MBB).getPrevSlot() becomes stable so it stays
greater than any instructions inserted at the end of MBB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118747 91177308-0d34-0410-b5e6-96231b3b80d8
Whenever splitting wants to insert a copy, it checks if the value can be
rematerialized cheaply instead.
Missing features:
- Delete instructions when all uses have been rematerialized.
- Truncate live ranges to the remaining uses after rematerialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118702 91177308-0d34-0410-b5e6-96231b3b80d8
benchmarks hitting an assertion.
Adds LiveIntervalUnion::collectInterferingVRegs.
Fixes "late spilling" by checking for any unspillable live vregs among
all physReg aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118701 91177308-0d34-0410-b5e6-96231b3b80d8
handle cases in which a register is unavailable for spill code.
Adds LiveIntervalUnion::extract. While processing interferences on a
live virtual register, reuses the same Query object for each
physcial reg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118423 91177308-0d34-0410-b5e6-96231b3b80d8
to perform the copy, which may be of lots of memory [*]. It would be good if the
fall-back code generated something reasonable, i.e. did the copy in a loop, rather
than vast numbers of loads and stores. Add a note about this. Currently target
specific code seems to always kick in so this is more of a theoretical issue rather
than a practical one now that X86 has been fixed.
[*] It's amazing how often people pass mega-byte long arrays by copy...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118275 91177308-0d34-0410-b5e6-96231b3b80d8
and as such can be represented by an MVT - the more complicated
EVT is not needed. Use MVT for ValVT everywhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118245 91177308-0d34-0410-b5e6-96231b3b80d8
This way, InlineSpiller does the same amount of splitting as the standard
spiller. Splitting should really be guided by the register allocator, and
doesn't belong in the spiller at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118216 91177308-0d34-0410-b5e6-96231b3b80d8
with a SimpleValueType, while an EVT supports equality and
inequality comparisons with SimpleValueType.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118169 91177308-0d34-0410-b5e6-96231b3b80d8
value type, so there is no point in passing it around using
an EVT. Use the simpler MVT everywhere. Rather than trying
to propagate this information maximally in all the code that
using the calling convention stuff, I chose to do a mainly
low impact change instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118167 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fix pre-ra scheduler so it doesn't try to push instructions above calls to
"optimize for latency". Call instructions don't have the right latency and
this is more likely to use introduce spills.
2. Fix if-converter cost function. For ARM, it should use instruction latencies,
not # of micro-ops since multi-latency instructions is completely executed
even when the predicate is false. Also, some instruction will be "slower"
when they are predicated due to the register def becoming implicit input.
rdar://8598427
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118135 91177308-0d34-0410-b5e6-96231b3b80d8
breaker needs to check all definitions of the antidepenent register to
avoid multiple defs of the same new register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118032 91177308-0d34-0410-b5e6-96231b3b80d8
BB#1: derived from LLVM BB %bb.nph28
Live Ins: %AL
Predecessors according to CFG: BB#0
TEST8rr %reg16384<kill>, %reg16384, %EFLAGS<imp-def>; GR8:%reg16384
JNE_4 <BB#2>, %EFLAGS<imp-use,kill>
JMP_4 <BB#2>
Successors according to CFG: BB#2 BB#2
These double CFG edges only ever occur in bugpoint-generated code, so there is
no need to attempt something clever.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117992 91177308-0d34-0410-b5e6-96231b3b80d8
It is legal for an instruction to have two operands using the same register,
only one a kill. This is interpreted as a kill.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117981 91177308-0d34-0410-b5e6-96231b3b80d8
source, and let rewrite() clean it up.
This way, kill flags on the inserted copies are fixed as well during rewrite().
We can't just assume that all the copies we insert are going to be kills since
critical edges into loop headers sometimes require both source and dest to be
live out of a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117980 91177308-0d34-0410-b5e6-96231b3b80d8
At least X86FloatingPoint requires correct kill flags after register allocation,
and targets using register scavenging benefit. Conservative kill flags are not
enough.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117960 91177308-0d34-0410-b5e6-96231b3b80d8
at more than those which define CPSR. You can have this situation:
(1) subs ...
(2) sub r6, r5, r4
(3) movge ...
(4) cmp r6, 0
(5) movge ...
We cannot convert (2) to "subs" because (3) is using the CPSR set by
(1). There's an analogous situation here:
(1) sub r1, r2, r3
(2) sub r4, r5, r6
(3) cmp r4, ...
(5) movge ...
(6) cmp r1, ...
(7) movge ...
We cannot convert (1) to "subs" because of the intervening use of CPSR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117950 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction refers to a spill slot with a LiveStacks entry, check that
the spill slot is live at the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117944 91177308-0d34-0410-b5e6-96231b3b80d8
