for TLS dynamic models on 64-bit PowerPC ELF. The default sort routine
for relocations only sorts on the r_offset field; but with TLS, there
can be two relocations with the same r_offset. For PowerPC, this patch
sorts secondarily on descending r_type, which matches the behavior
expected by the linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170237 91177308-0d34-0410-b5e6-96231b3b80d8
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
some hackery in place that hid my poor use of TblGen, which I've now sorted
out and cleaned up. No change in observable behavior, so no new test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170149 91177308-0d34-0410-b5e6-96231b3b80d8
Accordingly, add helper funtions getSimpleValueType (in parallel to
getValueType) in SDValue, SDNode, and TargetLowering.
This is the first, in a series of patches.
This is the second attempt. In the first attempt (r169837), a few
getSimpleVT() were hoisted too far, detected by bootstrap failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170104 91177308-0d34-0410-b5e6-96231b3b80d8
FFR1_W_M and FFR1P_M. The new instruction definitions have one-to-one
correspondence with the instructions in the ISA manual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170053 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8
Add R_ARM_NONE and R_ARM_PREL31 relocation types
to MCExpr. Both of them will be used while
generating .ARM.extab and .ARM.exidx sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169965 91177308-0d34-0410-b5e6-96231b3b80d8
mention the inline memcpy / memset expansion code is a mess?
This patch split the ZeroOrLdSrc argument into two: IsMemset and ZeroMemset.
The first indicates whether it is expanding a memset or a memcpy / memmove.
The later is whether the memset is a memset of zero. It's totally possible
(likely even) that targets may want to do different things for memcpy and
memset of zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169959 91177308-0d34-0410-b5e6-96231b3b80d8
Also added more comments to explain why it is generally ok to return true.
- Rename getOptimalMemOpType argument IsZeroVal to ZeroOrLdSrc. It's meant to
be true for loaded source (memcpy) or zero constants (memset). The poor name
choice is probably some kind of legacy issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169954 91177308-0d34-0410-b5e6-96231b3b80d8
Pre-regalloc frame allocation and referencing has been on by default
for ages. No need for the testing option that disables it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169931 91177308-0d34-0410-b5e6-96231b3b80d8
ScalarTargetTransformInfo::getIntImmCost() instead. "Legal" is a poorly defined
term for something like integer immediate materialization. It is always possible
to materialize an integer immediate. Whether to use it for memcpy expansion is
more a "cost" conceern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169929 91177308-0d34-0410-b5e6-96231b3b80d8
Given a thread-local symbol x with global-dynamic access, the generated
code to obtain x's address is:
Instruction Relocation Symbol
addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
<use address in r3>
The implementation borrows from the medium code model work for introducing
special forms of ADDIS and ADDI into the DAG representation. This is made
slightly more complicated by having to introduce a call to the external
function __tls_get_addr. Using the full call machinery is overkill and,
more importantly, makes it difficult to add a special relocation. So I've
introduced another opcode GET_TLS_ADDR to represent the function call, and
surrounded it with register copies to set up the parameter and return value.
Most of the code is pretty straightforward. I ran into one peculiarity
when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like
BL8_NOP_ELF except that it takes another parameter to represent the symbol
("x" above) that requires a relocation on the call. Something in the
TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated
identically during the emit phase, so this second operand was never
visited to generate relocations. This is the reason for the slightly
messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding().
Two new tests are included to demonstrate correct external assembly and
correct generation of relocations using the integrated assembler.
Comments welcome!
Thanks,
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
Accordingly, add helper funtions getSimpleValueType (in parallel to
getValueType) in SDValue, SDNode, and TargetLowering.
This is the first, in a series of patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169837 91177308-0d34-0410-b5e6-96231b3b80d8
This shouldn't affect codegen for -O0 compiles as tail call markers are not
emitted in unoptimized compiles. Testing with the external/internal nightly
test suite reveals no change in compile time performance. Testing with -O1,
-O2 and -O3 with fast-isel enabled did not cause any compile-time or
execution-time failures. All tests were performed on my x86 machine.
I'll monitor our arm testers to ensure no regressions occur there.
In an upcoming clang patch I will be marking the objc_autoreleaseReturnValue
and objc_retainAutoreleaseReturnValue as tail calls unconditionally. While
it's theoretically true that this is just an optimization, it's an
optimization that we very much want to happen even at -O0, or else ARC
applications become substantially harder to debug.
Part of rdar://12553082
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169796 91177308-0d34-0410-b5e6-96231b3b80d8
1. Teach it to use overlapping unaligned load / store to copy / set the trailing
bytes. e.g. On 86, use two pairs of movups / movaps for 17 - 31 byte copies.
2. Use f64 for memcpy / memset on targets where i64 is not legal but f64 is. e.g.
x86 and ARM.
3. When memcpy from a constant string, do *not* replace the load with a constant
if it's not possible to materialize an integer immediate with a single
instruction (required a new target hook: TLI.isIntImmLegal()).
4. Use unaligned load / stores more aggressively if target hooks indicates they
are "fast".
5. Update ARM target hooks to use unaligned load / stores. e.g. vld1.8 / vst1.8.
Also increase the threshold to something reasonable (8 for memset, 4 pairs
for memcpy).
This significantly improves Dhrystone, up to 50% on ARM iOS devices.
rdar://12760078
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169791 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Not all chips targeted by x86_64 have this feature, but a dramatically
increasing number do. Specifying a chip-specific tuning parameter will
continue to turn the feature on or off as appropriate for that
particular chip, but the generic flag should try to achieve the best
performance on the most widely available hardware. Today, the number of
chips with fast UA access dwarfs those without in the x86-64 space.
Note that this also brings LLVM's code generation for this '-march' flag
more in line with that of modern GCCs.
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169740 91177308-0d34-0410-b5e6-96231b3b80d8
Intel chips.
The model number rules were determined by inspecting Intel's
documentation for their newer chip model numbers. My understanding is
that all of the newer Intel chips have fast unaligned memory access, but
if anyone is concerned about a particular chip, just shout.
No tests updated; it's not clear we have dedicated tests for the chips'
various features, but if anyone would like tests (or can point me at
some existing ones), I'm happy to oblige.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169730 91177308-0d34-0410-b5e6-96231b3b80d8
- added function to VectorTargetTransformInfo to query cost of intrinsics
- vectorize trivially vectorizable intrinsic calls such as sin, cos, log, etc.
Reviewed by: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169711 91177308-0d34-0410-b5e6-96231b3b80d8
There are still bugs in this pass, as well as other issues that are
being worked on, but the bugs are crashers that occur pretty easily in
the wild. Test cases have been sent to the original commit's review
thread.
This reverts the commits:
r169671: Fix a logic error.
r169604: Move the popcnt tests to an X86 subdirectory.
r168931: Initial commit adding the pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169683 91177308-0d34-0410-b5e6-96231b3b80d8
the VSRI instruction before it since it does not affect the MSB.
Thanks Craig Topper for suggesting this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169638 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, when you objdump an LLVM-compiled file, objdump tried to
decode data-in-code sections as if they were code. This patch adds the missing
Mapping Symbols, as defined by "ELF for the ARM Architecture" (ARM IHI 0044D).
Patch based on work by Greg Fitzgerald.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169609 91177308-0d34-0410-b5e6-96231b3b80d8
understand target implementation of any_extend / extload, just generate
zero_extend in place of any_extend for liveouts when the target knows the
zero_extend will be implicit (e.g. ARM ldrb / ldrh) or folded (e.g. x86 movz).
rdar://12771555
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169536 91177308-0d34-0410-b5e6-96231b3b80d8
This is for the lldb team so most of but not all of the values are
to be printed as hex with this option. Some small values like the
scale in an X86 address were requested to printed in decimal
without the leading 0x.
There may be some tweaks need to places that may still be in
decimal that they want in hex. Specially for arm. I made my best
guess. Any tweaks from here should be simple.
I also did the best I know now with help from the C++ gurus
creating the cleanest formatImm() utility function and containing
the changes. But if someone has a better idea to make something
cleaner I'm all ears and game for changing the implementation.
rdar://8109283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169393 91177308-0d34-0410-b5e6-96231b3b80d8
textually as NativeClient. Also added a link to the native client project for
readers unfamiliar with it.
A Clang patch will follow shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169291 91177308-0d34-0410-b5e6-96231b3b80d8
on 64-bit PowerPC ELF.
The patch includes code to handle external assembly and MC output with the
integrated assembler. It intentionally does not support the "old" JIT.
For the initial-exec TLS model, the ABI requires the following to calculate
the address of external thread-local variable x:
Code sequence Relocation Symbol
ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x
add 9,9,x@tls R_PPC64_TLS x
The register 9 is arbitrary here. The linker will replace x@got@tprel
with the offset relative to the thread pointer to the generated GOT
entry for symbol x. It will replace x@tls with the thread-pointer
register (13).
The two test cases verify correct assembly output and relocation output
as just described.
PowerPC-specific selection node variants are added for the two
instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted
when an initial-exec global variable is encountered by
PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to
machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo
that uses the same LDrs support added for medium code model's LDtocL,
with a different relocation type.
The rest of the processing is straightforward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169281 91177308-0d34-0410-b5e6-96231b3b80d8
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169224 91177308-0d34-0410-b5e6-96231b3b80d8
These functions have been replaced by TRI::getRegAllocationHints() which
provides the same capabilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169192 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds endian-awareness to MipsJITInfo and emitWordLE in
MipsCodeEmitter has become emitWord now to support both endianness.
Patch by Petar Jovanovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169177 91177308-0d34-0410-b5e6-96231b3b80d8
This provides the same functionality as getRawAllocationOrder() for the
even/odd hints, but without the many constant register arrays.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169169 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
Codegen was failing with an assertion because of unexpected vector
operands when legalizing the selection DAG for a MUL instruction.
The asserting code was legalizing multiplies for vectors of size 128
bits. It uses a custom lowering to try and detect cases where it can
use a VMULL instruction instead of a VMOVL + VMUL. The code was
looking for input operands to the MUL that had been sign or zero
extended. If it found the extended operands it would drop the
sign/zero extension and use the original vector size as input to a
VMULL instruction.
The code assumed that the original input vector was 64 bits so that
after dropping the extension it would fit directly into a D register
and could be used as an operand of a VMULL instruction. The input
code that trigger the failure used a vector of <4 x i8> that was
sign extended to <4 x i32>. It was not safe to drop the sign
extension in this case because the original vector is only 32 bits
wide. The fix is to insert a sign extension for the vector to reach
the required 64 bit size. In this particular example, the vector would
need to be sign extented to a <4 x i16>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169024 91177308-0d34-0410-b5e6-96231b3b80d8
instruction (vmaddfp) to conform with IEEE to ensure the sign of a zero
result when resulting product is -0.0.
The -0.0 vector addend to vmaddfp is generated by a creating a vector
with full bits sets and then shifting each elements by 31-bits to the
left, resulting in a vector of 0x80000000 (or -0.0 as float).
The 'buildvec_canonicalize.ll' was adjusted to reflect this change and
the 'vec_mul.ll' was complemented with the float vector multiplication
test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168998 91177308-0d34-0410-b5e6-96231b3b80d8
Rationale:
1) This was the name in the comment block. ;]
2) It matches Clang's __has_feature naming convention.
3) It matches other compiler-feature-test conventions.
Sorry for the noise. =]
I've also switch the comment block to use a \brief tag and not duplicate
the name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168996 91177308-0d34-0410-b5e6-96231b3b80d8
This revision attempts to recognize following population-count pattern:
while(a) { c++; ... ; a &= a - 1; ... },
where <c> and <a>could be used multiple times in the loop body.
TODO: On X8664 and ARM, __buildin_ctpop() are not expanded to a efficent
instruction sequence, which need to be improved in the following commits.
Reviewed by Nadav, really appreciate!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168931 91177308-0d34-0410-b5e6-96231b3b80d8
For some targets, it is desirable to prefer scalarizing <N x i1> instead of promoting to a larger legal type, such as <N x i32>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168882 91177308-0d34-0410-b5e6-96231b3b80d8
The createPPCMCAsmInfo routine used PPC::R1 as the initial frame
pointer register, but on PPC64 the 32-bit R1 register does not
have a corresponding DWARF number, causing invalid CIE initial
frame state to be emitted. Fix by using PPC::X1 instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168799 91177308-0d34-0410-b5e6-96231b3b80d8
The Target library is not allowed to depend on the large CodeGen
library, but the TRI and TII classes provide abstract interfaces that
require both caller and callee to link to CodeGen.
The implementation files for these classes provide default
implementations of some of the hooks. These methods may need to
reference CodeGen, so they belong in that library.
We already have a number of methods implemented in the
TargetInstrInfoImpl sub-class because of that. I will merge that class
into the parent next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168758 91177308-0d34-0410-b5e6-96231b3b80d8
When the CodeGenInfo is to be created for the PPC64 target machine,
a default code-model selection is converted to CodeModel::Medium
provided we are not targeting the Darwin OS. Defaults for Darwin
are unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168747 91177308-0d34-0410-b5e6-96231b3b80d8
classes. The vast majority of the remaining issues are due to uses of
invalid registers, which are defined by getRegForValue(). Those will be
a little more challenging to cleanup.
rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168735 91177308-0d34-0410-b5e6-96231b3b80d8
when the destination register is wider than the memory load.
These load instructions load from m32 or m64 and set the upper bits to zero,
while the folded instructions may accept m128.
rdar://12721174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168710 91177308-0d34-0410-b5e6-96231b3b80d8
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
classes. The associated test case still doesn't pass, but it does have far
fewer issues.
rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168657 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was conservative in that it always reserved the FP to enable dynamic
stack realignment, which allowed the RA to use aligned spills for vector
registers. This happens even when spills were not necessary. The RA has
since been improved to use unaligned spills when necessary.
The new behavior is to realign the stack if the frame pointer was already
reserved for some other reason, but don't reserve the frame pointer just
because a function contains vector virtual registers.
Part of rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168627 91177308-0d34-0410-b5e6-96231b3b80d8
The last remaining bit is "bcl 20, 31, AnonSymbol", which I couldn't find the
instruction definition for. Only whitespace changes in assembly output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168541 91177308-0d34-0410-b5e6-96231b3b80d8
I discovered a few more missing functions while migrating optimizations
from the simplify-libcalls pass to the instcombine (I already added some
in r167659).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168501 91177308-0d34-0410-b5e6-96231b3b80d8
This patch provides support for the MIPS relocations:
*) R_MIPS_GOT_HI16
*) R_MIPS_GOT_LO16
*) R_MIPS_CALL_HI16
*) R_MIPS_CALL_LO16
These are used for large GOT instruction sequences.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168471 91177308-0d34-0410-b5e6-96231b3b80d8
