address of the PassInfo directly instead of calling getPassInfo.
This eliminates a bunch of dynamic initializations of static data.
Also, fold RegisterPassBase into PassInfo, make a bunch of its
data members const, and rearrange some code to initialize data
members in constructors instead of using setter member functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51022 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
if those blocks consist entirely of common instructions;
merging will not add an extra branch in this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51006 91177308-0d34-0410-b5e6-96231b3b80d8
semantically identical, but little difference in
either results or execution speed; but it's much
easier to read, at least IMO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50999 91177308-0d34-0410-b5e6-96231b3b80d8
case where there are multiple blocks with a large
number of common tail instructions more efficiently
(compile time optimization).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50916 91177308-0d34-0410-b5e6-96231b3b80d8
Darwin. This is a hack of course, but it does
at least look at the right thing: gotpcrel means
that this is already an offset, so an explicit
offset is not needed (and wrong). I think this
is good enough for the moment: Anton is working
on something better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50850 91177308-0d34-0410-b5e6-96231b3b80d8
on x86-64 linux. This causes no regressions on
32 bit linux and 32 bit ppc. More tests pass
on 64 bit ppc with no regressions. I didn't
turn on eh on 64 bit linux because the intrinsics
needed to compile the eh runtime aren't done
yet. But if you turn it on and link with the
mainline runtime then eh seems to work fine
on x86-64 linux with this patch. Thanks to
Dale for testing. The main point of the patch
is that if you output that some object is
encoded using 4 bytes you had better not output
8 bytes for it: the patch makes everything
consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50825 91177308-0d34-0410-b5e6-96231b3b80d8
%ecx = op
store %cl<kill>, (addr)
(addr) = op %al
It's not safe to unfold the last operand and eliminate store even though %cl is marked kill. It's a sub-register use which means one of its super-register(s) may be used below.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50794 91177308-0d34-0410-b5e6-96231b3b80d8
ComputeMaskedBits handles, just use a 'default:'. This avoids
TargetLowering's list getting out of date with SelectionDAG's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50693 91177308-0d34-0410-b5e6-96231b3b80d8
the code being generated does not require an executable stack.
Also, add target-specific code to make use of this on Linux
on x86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50634 91177308-0d34-0410-b5e6-96231b3b80d8
ffastmath mode. This fixes rdar://5902801, a miscompilation
of gcc.dg/builtins-8.c.
Bill, please pull this into Tak.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50523 91177308-0d34-0410-b5e6-96231b3b80d8
Move platform independent code (lowering of possibly overwritten
arguments, check for tail call optimization eligibility) from
target X86ISelectionLowering.cpp to TargetLowering.h and
SelectionDAGISel.cpp.
Initial PowerPC tail call implementation:
Support ppc32 implemented and tested (passes my tests and
test-suite llvm-test).
Support ppc64 implemented and half tested (passes my tests).
On ppc tail call optimization is performed if
caller and callee are fastcc
call is a tail call (in tail call position, call followed by ret)
no variable argument lists or byval arguments
option -tailcallopt is enabled
Supported:
* non pic tail calls on linux/darwin
* module-local tail calls on linux(PIC/GOT)/darwin(PIC)
* inter-module tail calls on darwin(PIC)
If constraints are not met a normal call will be emitted.
A test checking the argument lowering behaviour on x86-64 was added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50477 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the existing bottleneck related to the removal of elements from
the middle of the queue.
Also fixes a subtle bug in ScheduleDAGRRList::CapturePred:
It was updating the state of the SUnit before removing it. As a result, the
comparison operators were working incorrectly and this SUnit could not be removed
from the queue properly.
Reviewed by Evan and Dan. Approved by Dan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50412 91177308-0d34-0410-b5e6-96231b3b80d8
We now compile test2/test3 to:
_test2:
## InlineAsm Start
set %xmm0, %xmm1
## InlineAsm End
addps %xmm1, %xmm0
ret
_test3:
## InlineAsm Start
set %xmm0, %xmm1
## InlineAsm End
paddd %xmm1, %xmm0
ret
as expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50389 91177308-0d34-0410-b5e6-96231b3b80d8
towards PR2094. It now compiles the attached .ll file to:
_sad16_sse2:
movslq %ecx, %rax
## InlineAsm Start
%ecx %rdx %rax %rax %r8d %rdx %rsi
## InlineAsm End
## InlineAsm Start
set %eax
## InlineAsm End
ret
which is pretty decent for a 3 output, 4 input asm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50386 91177308-0d34-0410-b5e6-96231b3b80d8
e.g.
vr1024<2> extract_subreg vr1025, 2
If vr1024 do not have the same register class as vr1025, it's not safe to coalesce this away. For example, vr1024 might be a GPR32 while vr1025 might be a GPR64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50385 91177308-0d34-0410-b5e6-96231b3b80d8
c1, f1 = CopyToReg
c2, f2 = CopyToReg
c3 = TokenFactor c1, c2
...
= user c3, ..., f2
Now that the two CopyToReg's and the user are "flagged" together. They effectively forms a single scheduling unit. The TokenFactor is now both an operand and a successor of the Flagged nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50376 91177308-0d34-0410-b5e6-96231b3b80d8
memcpy/memset expansion. It was a bug for the SVOffset value
to be used in the actual address calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50359 91177308-0d34-0410-b5e6-96231b3b80d8
ComputeMaskedBits knows about cttz, ctlz, and ctpop. Teach
SelectionDAG's ComputeMaskedBits what InstCombine's knows
about SRem. And teach them both some things about high bits
in Mul, UDiv, URem, and Sub. This allows instcombine and
dagcombine to eliminate sign-extension operations in
several new cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50358 91177308-0d34-0410-b5e6-96231b3b80d8
conversion open the door for many nasty implicit conversion issues, and
can be easily solved by initializing with (V.begin(), V.end()) when
needed.
This patch includes many small cleanups for sdisel also.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50340 91177308-0d34-0410-b5e6-96231b3b80d8
When choosing between constraints with multiple options,
like "ir", test to see if we can use the 'i' constraint and
go with that if possible. This produces more optimal ASM in
all cases (sparing a register and an instruction to load it),
and fixes inline asm like this:
void test () {
asm volatile (" %c0 %1 " : : "imr" (42), "imr"(14));
}
Previously we would dump "42" into a memory location (which
is ok for the 'm' constraint) which would cause a problem
because the 'c' modifier is not valid on memory operands.
Isn't it great how inline asm turns 'missed optimization'
into 'compile failed'??
Incidentally, this was the todo in
PowerPC/2007-04-24-InlineAsm-I-Modifier.ll
Please do NOT pull this into Tak.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50315 91177308-0d34-0410-b5e6-96231b3b80d8
- Make targetlowering.h fit in 80 cols.
- Make LowerAsmOperandForConstraint const.
- Make lowerXConstraint -> LowerXConstraint
- Make LowerXConstraint return a const char* instead of taking a string byref.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50312 91177308-0d34-0410-b5e6-96231b3b80d8
to the block that defines their operands. This doesn't work in the
case that the operand is an invoke, because invoke is a terminator
and must be the last instruction in a block.
Replace it with support in SelectionDAGISel for copying struct values
into sequences of virtual registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50279 91177308-0d34-0410-b5e6-96231b3b80d8
function, and then use it to fix a bug in SplitVectorOp that expected inserts
to always have constant insertion indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50273 91177308-0d34-0410-b5e6-96231b3b80d8
LegalizeTypes. Correct the load logic so
that it actually works, and also teach it
to handle floating point extending loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49923 91177308-0d34-0410-b5e6-96231b3b80d8
rather than having it suck them out of a node. Add
a bunch of new libcalls, and remove dead softfloat
code (dead, because FloatToInt is used not Expand
in this case). Note that indexed stores probably
aren't handled properly, likewise for loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49915 91177308-0d34-0410-b5e6-96231b3b80d8
Rename SDOperandImpl back to SDOperand.
Introduce the SDUse class that represents a use of the SDNode referred by
an SDOperand. Now it is more similar to Use/Value classes.
Patch is approved by Dan Gohman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49795 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAG; they don't correspond to any actual instructions so they
don't need to be scheduled.
This fixes a bug where the EntryToken was being scheduled multiple
times in some cases, though it ended up not causing any trouble because
EntryToken doesn't expand into anything. With this fixed the schedulers
reliably schedule the expected number of units, so we can check this
with an assertion.
This requires a tweak to test/CodeGen/X86/loop-hoist.ll because it
ends up getting scheduled differently in a trivial way, though it was
enough to fool the prcontext+grep that the test does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49701 91177308-0d34-0410-b5e6-96231b3b80d8
stack tracebacks on Darwin x86-64 won't work by default;
nevertheless, everybody but me thinks this is a good idea.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49663 91177308-0d34-0410-b5e6-96231b3b80d8
much simpler than in LegalizeDAG because calls are
not yet expanded into call sequences: that happens
after type legalization has finished.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49634 91177308-0d34-0410-b5e6-96231b3b80d8
in its maps. Add some sanity checks that catch
this kind of thing. Hopefully these can be
removed one day (once all problems are fixed!)
but for the moment it seems wise to have them in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49612 91177308-0d34-0410-b5e6-96231b3b80d8
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49572 91177308-0d34-0410-b5e6-96231b3b80d8
If it cannot be expanded, it will keep the old behaviour and try to shrink the constant.
Part of enhancement for PR2191.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49280 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, introduction of XXX::Create methods
for Users that have a potentially variable number of
Uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49277 91177308-0d34-0410-b5e6-96231b3b80d8
2. Coalescer can now create an interesting situation where a register def can
reaches itself without being killed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49246 91177308-0d34-0410-b5e6-96231b3b80d8
before an invoke. Failure to do this causes references in
the landing pad to variables that were not set. Fixes
g++.dg/eh/delayslot1.C
g++.dg/eh/fp-regs.C
g++.old-deja/g++.brendan/eh1.C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49243 91177308-0d34-0410-b5e6-96231b3b80d8
There is no point in creating a long live range defined by an implicit_def. Scheduler now duplicates implicit_def instruction for each of its uses. Therefore, if an implicit_def node has multiple uses, it will become a number of very short live ranges, rather than a long one. This will make coalescer's job easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49164 91177308-0d34-0410-b5e6-96231b3b80d8
review feedback.
-enable-eh is still accepted but doesn't do anything.
EH intrinsics use Dwarf EH if the target supports that,
and are handled by LowerInvoke otherwise.
The separation of the EH table and frame move data is,
I think, logically figured out, but either one still
causes full EH info to be generated (not sure how to
split the metadata correctly).
MachineModuleInfo::needsFrameInfo is no longer used and
is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49064 91177308-0d34-0410-b5e6-96231b3b80d8
not marked nounwind, or for all functions when -enable-eh
is set, provided the target supports Dwarf EH.
llvm-gcc generates nounwind in the right places; other FEs
will need to do so also. Given such a FE, -enable-eh should
no longer be needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49006 91177308-0d34-0410-b5e6-96231b3b80d8
In order to handle indexed nodes I had to introduce
a new constructor, and since I was there I factorized
the code in the various load constructors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48894 91177308-0d34-0410-b5e6-96231b3b80d8
nodes. This doesn't currently have much impact the generated code, but it
does produce simpler-looking SelectionDAGs, and consequently
simpler-looking ScheduleDAGs, because there are fewer spurious
dependencies.
In particular, CopyValueToVirtualRegister now uses the entry node as the
input chain dependency for new CopyToReg nodes instead of calling getRoot
and depending on the most recent memory reference.
Also, rename UnorderedChains to PendingExports and pull it up from being
a local variable in SelectionDAGISel::BuildSelectionDAG to being a
member variable of SelectionDAGISel, so that it doesn't have to be
passed around to all the places that need it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48893 91177308-0d34-0410-b5e6-96231b3b80d8
called LimitedSumOfUnscheduledPredsOfSuccs. It terminates the computation
after a given treshold is reached. This new function is always faster, but
brings real wins only on bigger test-cases.
The old function SumOfUnscheduledPredsOfSuccs is left in-place for now and therefore a warning about an unused static function is produced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48872 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM Value/Use does and MachineRegisterInfo/MachineOperand does.
This allows constant time for all uses list maintenance operations.
The idea was suggested by Chris. Reviewed by Evan and Dan.
Patch is tested and approved by Dan.
On normal use-cases compilation speed is not affected. On very big basic
blocks there are compilation speedups in the range of 15-20% or even better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48822 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes Bugzilla #1835 (http://llvm.org/bugs/show_bug.cgi?id=1835).
This patched is reviewed by Tanya and Dan. Dan tested and approved it.
The reason for the bad performance of the old algorithm is that it is very naive and scans every
time all nodes of the DAG in the worst case.
This patch introduces a new algorithm based on the paper "Online algorithms
for maintaining the topological order of a directed acyclic graph" by
David J.Pearce and Paul H.J.Kelly. This is the MNR algorithm. It has a
linear time worst-case and performs much better in most situations.
The paper can be found here:
http://fano.ics.uci.edu/cites/Document/Online-algorithms-for-maintaining-the-topological-order-of-a-directed-acyclic-graph.html
The main idea of the new algorithm is to compute the topological ordering of the SNodes in the
DAG and to maintain it even after DAG modifications. The topological ordering allows for very fast
node reachability checks.
Tests on very big input files with tens of thousands of instructions in a BB indicate huge
speed-ups (up to 10x compilation time improvement) compared to the old version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48817 91177308-0d34-0410-b5e6-96231b3b80d8
With this pass, StrongPHIElim can compile very simple testcases correctly. There's still a ways
to go before it's ready for prime time, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48719 91177308-0d34-0410-b5e6-96231b3b80d8
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48640 91177308-0d34-0410-b5e6-96231b3b80d8
1. If part of a register is re-defined, an implicit kill and an implicit def are added to denote read / mod / write. However, this should only be necessary if the register is actually read later. This is a performance issue.
2. If a sub-register is being defined, and it doesn't have a previous use, do not add a implicit kill to the last use of a super-register:
= EAX, AX<imp-use,kill>
...
AX =
In this case, EAX is live but AX is killed, this is wrong and will cause the coalescer to do bad things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48521 91177308-0d34-0410-b5e6-96231b3b80d8
Use getIntPtrConstant in a couple places to shorten stuff up
Handle splitting vector shuffles with undefs in the mask
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48351 91177308-0d34-0410-b5e6-96231b3b80d8
Note: the coalescer will have to be careful about this too, when it starts coalescing insert_subreg nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48329 91177308-0d34-0410-b5e6-96231b3b80d8
the fcopysign expansion from LegalizeDAG to get rid of
what seems to be a bug: the use of sign extension means
that when copying the sign bit from an f32 to an f64,
the upper 32 bits of the f64 (now an i64) are set, not
just the top bit... I also generalized it to work for
any sized floating point types, and removed the bogosity:
SDOperand Mask1 = (SrcVT == MVT::f64)
? DAG.getConstantFP(BitsToDouble(1ULL << 63), SrcVT)
: DAG.getConstantFP(BitsToFloat(1U << 31), SrcVT);
Mask1 = DAG.getNode(ISD::BIT_CONVERT, SrcNVT, Mask1);
(here SrcNVT is an integer with the same size as SrcVT).
As far as I can see this takes a 1 << 63, converts to
a double, converts that to a floating point constant
then converts that to an integer constant, ending up
with... 1 << 63 as an integer constant! So I just
generate this integer constant directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48305 91177308-0d34-0410-b5e6-96231b3b80d8
getCopyToParts problem was noticed by the new
LegalizeTypes infrastructure. In order to avoid
this kind of thing in the future I've added a
check that EXTRACT_ELEMENT is only used with
integers. Once LegalizeTypes is up and running
most likely BUILD_PAIR and EXTRACT_ELEMENT can
be removed, in favour of using apints instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48294 91177308-0d34-0410-b5e6-96231b3b80d8
X86 lowering normalize vector 0 to v4i32. However DAGCombine can fold (sub x, x) -> 0 after legalization. It can create a zero vector of a type that's not expected (e.g. v8i16). We don't want to disable the optimization since leaving a (sub x, x) is really bad. Add isel patterns for other types of vector 0 to ensure correctness. It's highly unlikely to happen other than in bugpoint reduced test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48279 91177308-0d34-0410-b5e6-96231b3b80d8
that merely add passes. This allows them to be used with either
FunctionPassManager or PassManager, or even with a custom new
kind of pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48256 91177308-0d34-0410-b5e6-96231b3b80d8
and it's the result that requires expansion. This code is a little confusing
because the TargetLoweringInfo tables for [US]INT_TO_FP use the operand type
(the integer type) rather than the result type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48206 91177308-0d34-0410-b5e6-96231b3b80d8
