creation activity into the target-specific subclasses of TLOF.
Before this, globals with explicit sections could be created by
the base class.
1. make getOrCreateSection protected, add a new getExplicitSectionGlobal
pure virtual method to assign sections to globals with a specified
section.
2. eliminate getSpecialCasedSectionGlobals, which is now PIC specific.
3. eliminate the getKindForNamedSection virtual method, which is
now just a static method for ELF.
4. Add implementions of getExplicitSectionGlobal for ELF/PECOFF/Darwin/PIC16.
They are now all detangled and understandable, woo! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78319 91177308-0d34-0410-b5e6-96231b3b80d8
by aggressive chain operand optimization. UpdateNodeOperands
does not modify the node in place if it would result in
a node identical to an existing node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78297 91177308-0d34-0410-b5e6-96231b3b80d8
that have that constraint. This is currently just assigning a fixed set of
registers, and it only handles VLDn for n=2,3,4 with DPR registers.
I'm going to expand it to handle more operations next; we can make it smarter
once everything is working correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78256 91177308-0d34-0410-b5e6-96231b3b80d8
a dirty hack and isn't need anymore since the last x86 code emitter patch)
- Add a target-dependent modifier to addend calculation
- Use R_X86_64_32S relocation for X86::reloc_absolute_word_sext
- Use getELFSectionFlags whenever possible
- fix getTextSection to use TLOF and emit the right text section
- Handle global emission for static ctors, dtors and Type::PointerTyID
- Some minor fixes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78176 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of awkwardly encoding calling-convention information with ISD::CALL,
ISD::FORMAL_ARGUMENTS, ISD::RET, and ISD::ARG_FLAGS nodes, TargetLowering
provides three virtual functions for targets to override:
LowerFormalArguments, LowerCall, and LowerRet, which replace the custom
lowering done on the special nodes. They provide the same information, but
in a more immediately usable format.
This also reworks much of the target-independent tail call logic. The
decision of whether or not to perform a tail call is now cleanly split
between target-independent portions, and the target dependent portion
in IsEligibleForTailCallOptimization.
This also synchronizes all in-tree targets, to help enable future
refactoring and feature work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78142 91177308-0d34-0410-b5e6-96231b3b80d8
calls were originally put in place because errs() at one time was
not unbuffered, and these print routines are commonly used with errs()
for debugging. However, errs() is now properly unbuffered, so the
flush calls are no longer needed. This significantly reduces the
number of write(2) calls for regular asm printing when there are many
small functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78137 91177308-0d34-0410-b5e6-96231b3b80d8
Get rid of yesterday's code to fix the register usage during isel.
Select the new DAG nodes to machine instructions. The new pre-alloc pass
to choose adjacent registers for these results is not done, so the
results of this will generally not assemble yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78136 91177308-0d34-0410-b5e6-96231b3b80d8
for ELF to work.
2) RIP addressing: Use SIB bytes for absolute relocations where RegBase=0,
IndexReg=0.
3) The JIT can get the real address of cstpools and jmptables during
code emission, fix that for object code emission
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78129 91177308-0d34-0410-b5e6-96231b3b80d8
For other VLDn and VSTn operations, we need to list the multiple registers
explicitly anyway, so there's no point in special-casing this one usage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78109 91177308-0d34-0410-b5e6-96231b3b80d8
the masm backend. If anyone cares about masm in the future,
we'll have semantic sections it can hang off of.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78096 91177308-0d34-0410-b5e6-96231b3b80d8
- The theory is these should never actually be called, since these boil down to
passes which can access the target data via the standard mechanism.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77975 91177308-0d34-0410-b5e6-96231b3b80d8
Since we're generating stubs by hands we don't follow the ABI and don't
create a register spill area.
Don't use this area in compilation callback!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77968 91177308-0d34-0410-b5e6-96231b3b80d8
This is not just a matter of passing in the target triple from the module;
currently backends are making decisions based on the build and host
architecture. The goal is to migrate to making these decisions based off of the
triple (in conjunction with the feature string). Thus most clients pass in the
target triple, or the host triple if that is empty.
This has one important change in the way behavior of the JIT and llc.
For the JIT, it was previously selecting the Target based on the host
(naturally), but it was setting the target machine features based on the triple
from the module. Now it is setting the target machine features based on the
triple of the host.
For LLC, -march was previously only used to select the target, the target
machine features were initialized from the module's triple (which may have been
empty). Now the target triple is taken from the module, or the host's triple is
used if that is empty. Then the triple is adjusted to match -march.
The take away is that -march for llc is now used in conjunction with the host
triple to initialize the subtarget. If users want more deterministic behavior
from llc, they should use -mtriple, or set the triple in the input module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77946 91177308-0d34-0410-b5e6-96231b3b80d8
options, which don't appear to be useful. -enable-mips-absolute-call is
completely unused (and unless I'm mistaken, is supposed to have the
same effect that -relocation-model=dynamic-no-pic should have),
and -disable-mips-abicall appears to be effectively a
synonym for -relocation-model=static. Adjust the few users of hasABICall
to checks which seem more appropriate. Update MipsSubtarget,
MipsTargetMachine, and MipselTargetMachine to synchronize with recent
changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77938 91177308-0d34-0410-b5e6-96231b3b80d8
pushes in the function prolog if the function doesn't have any stack space,
i.e. for a prolog like:
0x40011870: push %r15
0x40011872: push %r14
0x40011874: push %rbx
Patch by Zoltan!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77919 91177308-0d34-0410-b5e6-96231b3b80d8
Module*.
Also, dropped uses of TargetMachine where unnecessary. The only target which
still takes a TargetMachine& is Mips, I would appreciate it if someone would
normalize this to match other targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77918 91177308-0d34-0410-b5e6-96231b3b80d8
__builtin_bfin_ones does the same as ctpop, so it can be implemented in the front-end.
__builtin_bfin_loadbytes loads from an unaligned pointer with the disalignexcpt instruction. It does the same as loading from a pointer with the low bits masked. It is better if the front-end creates a masked load. We can always instruction select the masked to disalignexcpt+load.
We keep csync/ssync/idle. These intrinsics represent instructions that need workarounds for some silicon revisions. We may even want to convert inline assembler to intrinsics to enable the workarounds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77917 91177308-0d34-0410-b5e6-96231b3b80d8
the only real caller (GetFunctionSizeInBytes) uses it.
The custom ARM implementation of this is basically reimplementing
an assembler poorly for negligible gain. It should be removed
IMNSHO, but I'll leave that to ARMish folks to decide.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77877 91177308-0d34-0410-b5e6-96231b3b80d8
getLSDASection() to be more specific. This makes it pretty obvious
that the ELF LSDA section is being specified wrong in PIC mode. We're
probably getting a lot of startup-time relocations to a readonly page,
which is expensive and bad.
Someone who cares about ELF C++ should investigate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77847 91177308-0d34-0410-b5e6-96231b3b80d8
compute it based on what it knows. As part of this, rename getSectionForMergeableConstant
to getSectionForConstant because it works for non-mergable constants also.
The only functionality change from this is that Xcore will start dropping
its jump tables into readonly section instead of data section in -static mode.
This should be fine as the linker resolves the relocations. If this is a
problem, let me know and we'll come up with another solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77833 91177308-0d34-0410-b5e6-96231b3b80d8
should have no state that is specific to particular globals in the
section. In this case, it means the removal of the "isWeak" and
"ExplicitSection" bits. MCSection uses the new form of SectionKind.
To handle isWeak, I introduced a new SectionInfo class, which is
SectionKind + isWeak, and it is used by the part of the code generator
that does classification of a specific global.
The ExplicitSection disappears. It is moved onto MCSection as a new
"IsDirective" bit. Since the Name of a section is either a section
or directive, it makes sense to keep this bit in MCSection. Ultimately
the creator of MCSection should canonicalize (e.g.) .text to whatever
the actual section is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77803 91177308-0d34-0410-b5e6-96231b3b80d8
instructions for calls since BL and BLX are always 32-bit long and BX is always
16-bit long.
Also, we should be using BLX to call external function stubs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77756 91177308-0d34-0410-b5e6-96231b3b80d8
- Operands which are just a label should be parsed as immediates, not memory
operands (from the assembler perspective).
- Match a few more flavors of immediates.
- Distinguish match functions for memory operands which don't take a segment
register.
- We match the .s for "hello world" now!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77745 91177308-0d34-0410-b5e6-96231b3b80d8
thing is #if0'd out anyway. Just simplify the code by reducing the interface.
Not deleting this is essential for Bill's continuing happiness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77736 91177308-0d34-0410-b5e6-96231b3b80d8
indicate that it is a predicate, not an emitter. This eliminates TAI
dependencies on Mangler and GlobalValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77726 91177308-0d34-0410-b5e6-96231b3b80d8
because it just calls the default impl.
Remove the PPCDarwinTargetAsmInfo version of PreferredEHDataFormat because
it just returns DW_EH_PE_absptr unless on 10.6. However, 10.6 doesn't support
PPC, so the default impl is just fine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77724 91177308-0d34-0410-b5e6-96231b3b80d8
to ensure the instruction that follows a TBB (when the number of table entries
is odd) is 2-byte aligned.
Patch by Sandeep Patel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77705 91177308-0d34-0410-b5e6-96231b3b80d8
shouldn't do AU.setPreservesCFG(), because even though CodeGen passes
don't modify the LLVM IR CFG, they may modify the MachineFunction CFG,
and passes like MachineLoop are registered with isCFGOnly set to true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77691 91177308-0d34-0410-b5e6-96231b3b80d8
into the mergable section if it is one of our special cases. This could
obviously be improved, but this is the minimal fix and restores us to the
previous behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77679 91177308-0d34-0410-b5e6-96231b3b80d8
failures when building assorted projects with clang.
--- Reverse-merging r77654 into '.':
U include/llvm/CodeGen/Passes.h
U include/llvm/CodeGen/MachineFunctionPass.h
U include/llvm/CodeGen/MachineFunction.h
U include/llvm/CodeGen/LazyLiveness.h
U include/llvm/CodeGen/SelectionDAGISel.h
D include/llvm/CodeGen/MachineFunctionAnalysis.h
U include/llvm/Function.h
U lib/Target/CellSPU/SPUISelDAGToDAG.cpp
U lib/Target/PowerPC/PPCISelDAGToDAG.cpp
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/MachineVerifier.cpp
U lib/CodeGen/MachineFunction.cpp
U lib/CodeGen/PrologEpilogInserter.cpp
U lib/CodeGen/MachineLoopInfo.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
D lib/CodeGen/MachineFunctionAnalysis.cpp
D lib/CodeGen/MachineFunctionPass.cpp
U lib/CodeGen/LiveVariables.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77661 91177308-0d34-0410-b5e6-96231b3b80d8
- This is "experimental" code, I am feeling my way around and working out the
best way to do things (and learning tblgen in the process). Comments welcome,
but keep in mind this stuff will change radically.
- This is enough to match "subb" and friends, but not much else. The next step is to
automatically generate the matchers for individual operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77657 91177308-0d34-0410-b5e6-96231b3b80d8
When the return value is not used (i.e. only care about the value in the memory), x86 does not have to use add to implement these. Instead, it can use add, sub, inc, dec instructions with the "lock" prefix.
This is currently implemented using a bit of instruction selection trick. The issue is the target independent pattern produces one output and a chain and we want to map it into one that just output a chain. The current trick is to select it into a merge_values with the first definition being an implicit_def. The proper solution is to add new ISD opcodes for the no-output variant. DAG combiner can then transform the node before it gets to target node selection.
Problem #2 is we are adding a whole bunch of x86 atomic instructions when in fact these instructions are identical to the non-lock versions. We need a way to add target specific information to target nodes and have this information carried over to machine instructions. Asm printer (or JIT) can use this information to add the "lock" prefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77582 91177308-0d34-0410-b5e6-96231b3b80d8
a Twine, e.g., for names).
- I am a little ambivalent about this; we don't want the string conversion of
utostr, but using overload '+' mixed with string and integer arguments is
sketchy. On the other hand, this particular usage is something of an idiom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77579 91177308-0d34-0410-b5e6-96231b3b80d8