it to ignore valid uses of FS and GS as additional
base registers in address computations. Added a test
case for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126302 91177308-0d34-0410-b5e6-96231b3b80d8
The previous codegen for the slow path (when values are in VFP / NEON
registers) was incorrect if the source is NaN.
The new codegen uses NEON vbsl instruction to copy the sign bit. e.g.
vmov.i32 d1, #0x80000000
vbsl d1, d2, d0
If NEON is not available, it uses integer instructions to copy the sign bit.
rdar://9034702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126295 91177308-0d34-0410-b5e6-96231b3b80d8
When a large live range is evicted, it will usually be split when it comes
around again. By deferring evicted live ranges, the splitting happens at a time
when the interference pattern is more realistic. This prevents repeated
splitting and evictions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126282 91177308-0d34-0410-b5e6-96231b3b80d8
Use interval sizes instead of spill weights to determine if it is legal to evict
interference. A smaller interval can evict interference if all interfering live
ranges are larger.
Allow multiple interferences to be evicted as along as they are all larger than
the live range being allocated.
Spill weights are still used to select the preferred eviction candidate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126276 91177308-0d34-0410-b5e6-96231b3b80d8
This is based on the observation that long live ranges are more difficult to
allocate, so there is a better chance of solving the puzzle by handling the big
pieces first. The allocator will evict and split long alive ranges when they get
in the way.
RABasic is still using spill weights for its priority queue, so the interface to
the queue has been virtualized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126259 91177308-0d34-0410-b5e6-96231b3b80d8
share entries. Add a DenseSet to MachineConstantPool for the MachineCPVs that
it owns.
This will hopefully fix the MC/ARM/elf-reloc-01.ll failure on the leaks bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126218 91177308-0d34-0410-b5e6-96231b3b80d8
up by the dynamic linker, but it's better to use the correct instruction
to begin with.
Fixes rdar://9011034
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126176 91177308-0d34-0410-b5e6-96231b3b80d8
at phis. This enables us to eliminate a lot of pointless zexts during the DAGCombine
phase. This fixes <rdar://problem/8760114>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126170 91177308-0d34-0410-b5e6-96231b3b80d8
In other words, do not keep track of argument's location. The debugger (gdb) is not prepared to see line table entries for arguments. For the debugger, "second" line table entry marks beginning of function body.
This requires some coordination with debugger to get this working.
- The debugger needs to be aware of prolog_end attribute attached with line table entries.
- The compiler needs to accurately mark prolog_end in line table entries (at -O0 and at -O1+)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126155 91177308-0d34-0410-b5e6-96231b3b80d8
An original endpoint is an instruction that killed or defined the original live
range before any live ranges were split.
When splitting global live ranges, avoid creating local live ranges without any
original endpoints. We may still create global live ranges without original
endpoints, but such a range won't be split again, and live range splitting still
terminates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126151 91177308-0d34-0410-b5e6-96231b3b80d8
X86 instruction decode structure was being interpreted as
being in units of bits, although it is actually stored in
units of bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126147 91177308-0d34-0410-b5e6-96231b3b80d8
itself without going via a phi node then we could return false here in
spite of making a change. Also, tweak the comment because this method
can (and always could) return true without deleting the original phi node.
For example, if the phi node was used by a read-only invoke instruction
which is used by another phi node phi2 which is only used by and only uses
the invoke, then phi2 would be deleted but not the invoke instruction and
not the original phi node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126129 91177308-0d34-0410-b5e6-96231b3b80d8
should be that if the phi is used by a side-effect free instruction with
no uses then the phi and the instruction now get zapped (checked by the
unittest).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126124 91177308-0d34-0410-b5e6-96231b3b80d8
"dllimport" function must not be GlobalVariable, but Function. It is enough to check with GlobalValue.
test/CodeGen/X86/dll-linkage.ll is updated to check llc -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126110 91177308-0d34-0410-b5e6-96231b3b80d8
of a constant had a minor typo introduced when copying it from the book, which
caused it to favor negative approximations over positive approximations in many
cases. Positive approximations require fewer operations beyond the multiplication.
In the case of division by 3, we still generate code that is a single instruction
larger than GCC's code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126097 91177308-0d34-0410-b5e6-96231b3b80d8
test for that. With this change, test/CodeGen/X86/codegen-dce.ll no longer finds
any instructions to DCE, so delete the test.
Also renamed J and JP to I and IP in RecursivelyDeleteDeadPHINode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126088 91177308-0d34-0410-b5e6-96231b3b80d8
We usually catch this kind of optimization through InstSimplify's distributive
magic, but or doesn't distribute over xor in general.
"A | ~(A | B) -> A | ~B" hits 24 times on gcc.c.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126081 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombiner folds the zext into complex load instructions. This patch
prevents this optimization on vectors since none of the supported targets
knows how to perform load+vector_zext in one instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126080 91177308-0d34-0410-b5e6-96231b3b80d8
one Value set. This is faster because we only need to use the set when there
isn't already an entry in the map. No functionality change!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126076 91177308-0d34-0410-b5e6-96231b3b80d8
since one needs to be a register operand. Just use movss instead of forcing
an operand into a register.
Fixes PR9239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126072 91177308-0d34-0410-b5e6-96231b3b80d8
of testing for its presence at cmake time.
This way the build automatically regenerates the makefiles when a svn
update brings in a new sublibrary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126068 91177308-0d34-0410-b5e6-96231b3b80d8
constant, including globals. This makes us generate much more "pretty" pattern
globals as well because it doesn't break it down to an array of bytes all the
time.
This enables us to handle stores of relocatable globals. This kicks in about
48 times in 254.gap, giving us stuff like this:
@.memset_pattern40 = internal constant [2 x %struct.TypHeader* (%struct.TypHeader*, %struct.TypHeader*)*] [%struct.TypHeader* (%struct.TypHeader*, %struct
.TypHeader*)* @IsFalse, %struct.TypHeader* (%struct.TypHeader*, %struct.TypHeader*)* @IsFalse], align 16
...
call void @memset_pattern16(i8* %scevgep5859, i8* bitcast ([2 x %struct.TypHeader* (%struct.TypHeader*, %struct.TypHeader*)*]* @.memset_pattern40 to i8*
), i64 %tmp75) nounwind
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126044 91177308-0d34-0410-b5e6-96231b3b80d8
unsplatable values into memset_pattern16 when it is available
(recent darwins). This transforms lots of strided loop stores
of ints for example, like 5 in vpr:
Formed memset: call void @memset_pattern16(i8* %4, i8* getelementptr inbounds ([16 x i8]* @.memset_pattern9, i32 0, i32 0), i64 %tmp25)
from store to: {%3,+,4}<%11> at: store i32 3, i32* %scevgep, align 4, !tbaa !4
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126040 91177308-0d34-0410-b5e6-96231b3b80d8
The rewriter works almost identically to -rewriter=trivial, except it also
eliminates any identity copies.
This makes the new register allocators independent of VirtRegRewriter.cpp which
will be going away at the same time as RegAllocLinearScan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125967 91177308-0d34-0410-b5e6-96231b3b80d8
query about available library functions. For now this just has
memset_pattern16, which exists on darwin, but it can be extended for a
bunch of other things in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125965 91177308-0d34-0410-b5e6-96231b3b80d8
taken (and used!). This prevents merging the blocks (invalidating
the block addresses) in a case like this:
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
void foo() {
printf("%p\n", _THIS_IP_);
printf("%p\n", _THIS_IP_);
printf("%p\n", _THIS_IP_);
}
which fixes PR4151.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125829 91177308-0d34-0410-b5e6-96231b3b80d8
This is part of a futile attempt to not "break" bizzaro
code like this:
l1:
printf("l1: %p\n", &&l1);
++x;
if( x < 3 ) goto l1;
Previously we'd fold &&l1 to 1, which is fine per our semantics
but not helpful to the user.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125827 91177308-0d34-0410-b5e6-96231b3b80d8
(LLVMX86Utils.a) to break cyclic library dependencies between
LLVMX86CodeGen.a and LLVMX86AsmParser.a. Previously this code was in
a header file and marked static but AVX requires some additional
functionality here that won't be used by all clients. Since including
unused static functions causes a gcc compiler warning, keeping it as a
header would break builds that use -Werror. Putting this in its own
library solves both problems at once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125765 91177308-0d34-0410-b5e6-96231b3b80d8
A local live range is live in a single basic block. If such a range fails to
allocate, try to find a sub-range that would get a larger spill weight than its
interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125764 91177308-0d34-0410-b5e6-96231b3b80d8
the time but presumably my email got lost). Examples where the previous logic
got it wrong: (1) a signed i8 multiply of 64 by 2 overflows, but the high part is
zero; (2) a signed i8 multiple of -128 by 2 overflows, but the high part is all
ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125748 91177308-0d34-0410-b5e6-96231b3b80d8
No one uses *-mingw64. mingw-w64 is represented as {i686|x86_64}-w64-mingw32. In llvm side, i686 and x64 can be treated as similar way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125747 91177308-0d34-0410-b5e6-96231b3b80d8
variations (some of these were already present so I unified the code). Spotted by my
auto-simplifier as occurring a lot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125734 91177308-0d34-0410-b5e6-96231b3b80d8
transformation if we can't legally create a build vector of the correct
type. Check that we can make the transformation first, and add a TODO to
refactor this code with similar cases.
Fixes: PR9223 and rdar://9000350
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125631 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary to avoid a crash in certain tangled situations where a kill
flag is first correctly moved to a merged instruction, and then needs to be
moved again:
STR %R0, a...
STR %R0<kill>, b...
First becomes:
STR %R0, b...
STM a, %R0<kill>, ...
and then:
STM a, %R0, ...
STM b, %R0<kill>, ...
We can now remove the kill flag from the merged STM when needed. 8960050.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125591 91177308-0d34-0410-b5e6-96231b3b80d8
Machine instruction range consisting of only DBG_VALUE MIs only contributes consecutive labels in assembly output, which is harmless, and empty scope entry in DebugInfo, which confuses debugger tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125577 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify the spill weight calculation a bit by bypassing
getApproximateInstructionCount() and using LiveInterval::getSize() directly.
This changes the computed spill weights, but only by a constant factor in each
function. It should not affect how spill weights compare against each other, and
so it shouldn't affect code generation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125530 91177308-0d34-0410-b5e6-96231b3b80d8
- Add custom operand matching for imod and iflags.
- Rename SplitMnemonicAndCC to SplitMnemonic since it splits more than CC
from mnemonic.
- While adding ".w" as an operand, don't change "Head" to avoid passing the
wrong mnemonic to ParseOperand.
- Add asm parser tests.
- Add disassembler tests just to make sure it can catch all cps versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125489 91177308-0d34-0410-b5e6-96231b3b80d8
have their low bits set to zero. This allows us to optimize
out explicit stack alignment code like in stack-align.ll:test4 when
it is redundant.
Doing this causes the code generator to start turning FI+cst into
FI|cst all over the place, which is general goodness (that is the
canonical form) except that various pieces of the code generator
don't handle OR aggressively. Fix this by introducing a new
SelectionDAG::isBaseWithConstantOffset predicate, and using it
in places that are looking for ADD(X,CST). The ARM backend in
particular was missing a lot of addressing mode folding opportunities
around OR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125470 91177308-0d34-0410-b5e6-96231b3b80d8
generating i8 shift amounts for things like i1024 types. Add
an assert in getNode to prevent this from occuring in the future,
fix the buggy transformation, revert my previous patch, and
document this gotcha in ISDOpcodes.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125465 91177308-0d34-0410-b5e6-96231b3b80d8
plus some variations of this. According to my auto-simplifier this occurs a lot
but usually in combination with max/min idioms. Because max/min aren't handled
yet this unfortunately doesn't have much effect in the testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125462 91177308-0d34-0410-b5e6-96231b3b80d8
It caused a crash in MultiSource/Benchmarks/Bullet.
Opt hit an assertion with "opt -std-compile-opts" because
Constant::getAllOnesValue doesn't know how to handle floats.
This patch added a test to reproduce the problem and a check that the
destination vector is of integer type.
Thank you Benjamin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125459 91177308-0d34-0410-b5e6-96231b3b80d8
the shift amounts are in a suitably wide type so that
we don't generate out of range constant shift amounts.
This fixes PR9028.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125458 91177308-0d34-0410-b5e6-96231b3b80d8
is narrower than the shift register. Doing an anyext provides undefined bits in
the top part of the register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125457 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a FIXME in scev-aa.ll (allowing a new no-alias result) and
generally makes things more precise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125449 91177308-0d34-0410-b5e6-96231b3b80d8
These are just FXSAVE and FXRSTOR with REX.W prefixes. These versions use
64-bit pointer values instead of 32-bit pointer values in the memory map they
dump and restore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125446 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombiner created illegal BUILD_VECTOR operations.
The patch added a check that either illegal operations are
allowed or that the created operation is legal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125435 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the AsmMatcher handling to distinguish between an error custom-parsing
an operand and a failure to match. The former should propogate the error
upwards, while the latter should continue attempting to parse with
alternative matchers.
Update the ARM asm parser accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125426 91177308-0d34-0410-b5e6-96231b3b80d8
unsigned overflow (e.g. "gep P, -1"), and while they can have
signed wrap in theoretical situations, modelling an AddRec as
not having signed wrap is going enough for any case we can
think of today. In the future if this isn't enough, we can
revisit this. Modeling them as having NUW isn't causing any
known problems either FWIW.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125410 91177308-0d34-0410-b5e6-96231b3b80d8
unsigned overflow (e.g. due to a negative array index), but
the scales on array size multiplications are known to not
sign wrap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125409 91177308-0d34-0410-b5e6-96231b3b80d8
The bug happens when the DAGCombiner attempts to optimize one of the patterns
of the SUB opcode. It tries to create a zero of type v2i64. This type is legal
on 32bit machines, but the initializer of this vector (i64) is target dependent.
Currently, the initializer attempts to create an i64 zero constant, which fails.
Added a flag to tell the DAGCombiner to create a legal zero, if we require that
the pass would generate legal types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125391 91177308-0d34-0410-b5e6-96231b3b80d8
a loop when unswitching it. It only does this in the complex case, because
everything should be fine already in the simple case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125369 91177308-0d34-0410-b5e6-96231b3b80d8
This
define float @foo(float %x, float %y) nounwind readnone {
entry:
%0 = tail call float @copysignf(float %x, float %y) nounwind readnone
ret float %0
}
Was compiled to:
vmov s0, r1
bic r0, r0, #-2147483648
vmov s1, r0
vcmpe.f32 s0, #0
vmrs apsr_nzcv, fpscr
it lt
vneglt.f32 s1, s1
vmov r0, s1
bx lr
This fails to copy the sign of -0.0f because it's lost during the float to int
conversion. Also, it's sub-optimal when the inputs are in GPR registers.
Now it uses integer and + or operations when it's profitable. And it's correct!
lsrs r1, r1, #31
bfi r0, r1, #31, #1
bx lr
rdar://8984306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125357 91177308-0d34-0410-b5e6-96231b3b80d8
gep to explicit addressing, we know that none of the intermediate
computation overflows.
This could use review: it seems that the shifts certainly wouldn't
overflow, but could the intermediate adds overflow if there is a
negative index?
Previously the testcase would instcombine to:
define i1 @test(i64 %i) {
%p1.idx.mask = and i64 %i, 4611686018427387903
%cmp = icmp eq i64 %p1.idx.mask, 1000
ret i1 %cmp
}
now we get:
define i1 @test(i64 %i) {
%cmp = icmp eq i64 %i, 1000
ret i1 %cmp
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125271 91177308-0d34-0410-b5e6-96231b3b80d8
for NSW/NUW binops to follow the pattern of exact binops. This
allows someone to use Builder.CreateAdd(x, y, "tmp", MaybeNUW);
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125270 91177308-0d34-0410-b5e6-96231b3b80d8
exact/nsw/nuw shifts and have instcombine infer them when it can prove
that the relevant properties are true for a given shift without them.
Also, a variety of refactoring to use the new patternmatch logic thrown
in for good luck. I believe that this takes care of a bunch of related
code quality issues attached to PR8862.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125267 91177308-0d34-0410-b5e6-96231b3b80d8
optimizations to be much more aggressive in the face of
exact/nsw/nuw div and shifts. For example, these (which
are the same except the first is 'exact' sdiv:
define i1 @sdiv_icmp4_exact(i64 %X) nounwind {
%A = sdiv exact i64 %X, -5 ; X/-5 == 0 --> x == 0
%B = icmp eq i64 %A, 0
ret i1 %B
}
define i1 @sdiv_icmp4(i64 %X) nounwind {
%A = sdiv i64 %X, -5 ; X/-5 == 0 --> x == 0
%B = icmp eq i64 %A, 0
ret i1 %B
}
compile down to:
define i1 @sdiv_icmp4_exact(i64 %X) nounwind {
%1 = icmp eq i64 %X, 0
ret i1 %1
}
define i1 @sdiv_icmp4(i64 %X) nounwind {
%X.off = add i64 %X, 4
%1 = icmp ult i64 %X.off, 9
ret i1 %1
}
This happens when you do something like:
(ptr1-ptr2) == 42
where the pointers are pointers to non-unit types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125266 91177308-0d34-0410-b5e6-96231b3b80d8
and generally tidying things up. Only very trivial functionality changes
like now doing (-1 - A) -> (~A) for vectors too.
InstCombineAddSub.cpp | 296 +++++++++++++++++++++-----------------------------
1 file changed, 126 insertions(+), 170 deletions(-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125264 91177308-0d34-0410-b5e6-96231b3b80d8
Natural Loop Information
Loop Pass Manager
Canonicalize natural loops
Scalar Evolution Analysis
Loop Pass Manager
Induction Variable Users
Canonicalize natural loops
Induction Variable Users
Loop Strength Reduction
into this:
Scalar Evolution Analysis
Loop Pass Manager
Canonicalize natural loops
Induction Variable Users
Loop Strength Reduction
This fixes <rdar://problem/8869639>. I also filed PR9184 on doing this sort of
thing automatically, but it seems easier to just change the ordering of the
passes if this is the only case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125254 91177308-0d34-0410-b5e6-96231b3b80d8
Loop splitting is better handled by the more generic global region splitting
based on the edge bundle graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125243 91177308-0d34-0410-b5e6-96231b3b80d8
name of a path, after resolving symbolic links and eliminating excess
path elements such as "foo/../" and "./".
This routine still needs a Windows implementation, but I don't have a
Windows machine available. Help? Please?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125228 91177308-0d34-0410-b5e6-96231b3b80d8
The tag is updated whenever the live interval union is changed, and it is tested
before using cached information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125224 91177308-0d34-0410-b5e6-96231b3b80d8
Now, Syntax is only used as a tie-breaker if the Arch
matches. Previously, a request for x86_64 disassembler followed by the
i386 disassembler in a single process would return the cached x86_64
disassembler. Fixes <rdar://problem/8958982>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125215 91177308-0d34-0410-b5e6-96231b3b80d8
versions of creation functions. Eventually, the "insertion point" versions
of these should just be removed, we do have IRBuilder afterall.
Do a massive rewrite of much of pattern match. It is now shorter and less
redundant and has several other widgets I will be using in other patches.
Among other changes, m_Div is renamed to m_IDiv (since it only matches
integer divides) and m_Shift is gone (it used to match all binops!!) and
we now have m_LogicalShift for the one client to use.
Enhance IRBuilder to have "isExact" arguments to things like CreateUDiv
and reduce redundancy within IRbuilder by having these methods chain to
each other more instead of duplicating code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125194 91177308-0d34-0410-b5e6-96231b3b80d8
could end up removing a different function than we intended because it was
functionally equivalent, then end up with a comparison of a function against
itself in the next round of comparisons (the one in the function set and the
one on the deferred list). To fix this, I introduce a choice in the form of
comparison for ComparableFunctions, either normal or "pointer only" used to
find exact Function*'s in lookups.
Also add some debugging statements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125180 91177308-0d34-0410-b5e6-96231b3b80d8
AC_CHECK_FUNCS seeks a symbol only in libs. We should check the declaration in string.h.
FIXME: I have never seen mingw(s) have strerror_s() (not _strerror_s()).
FIXME: Autoconf/CMake may seek strerror_s() with the definition MINGW_HAS_SECURE_API in future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125172 91177308-0d34-0410-b5e6-96231b3b80d8
Registers are not allocated strictly in spill weight order when live range
splitting and spilling has created new shorter intervals with higher spill
weights.
When one of the new heavy intervals conflicts with a single lighter interval,
simply evict the old interval instead of trying to split the heavy one.
The lighter interval is a better candidate for splitting, it has a smaller use
density.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125151 91177308-0d34-0410-b5e6-96231b3b80d8
The last split point can be anywhere in the block, so it interferes with the
strictly monotonic requirements of advanceTo().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125132 91177308-0d34-0410-b5e6-96231b3b80d8
This is a lot easier than trying to get kill flags right during live range
splitting and rematerialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125113 91177308-0d34-0410-b5e6-96231b3b80d8
anything but the simplest of cases, lower a 256-bit BUILD_VECTOR by
splitting it into 128-bit parts and recombining.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125105 91177308-0d34-0410-b5e6-96231b3b80d8
If a live range is used by a terminator instruction, and that live range needs
to leave the block on the stack or in a different register, it can be necessary
to have both sides of the split live at the terminator instruction.
Example:
%vreg2 = COPY %vreg1
JMP %vreg1
Becomes after spilling %vreg2:
SPILL %vreg1
JMP %vreg1
The spill doesn't kill the register as is normally the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125102 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid using the same register for two def operands or and earlyclobber
def and use operand. This fixes PR8986 and improves on the prior fix
for rdar://problem/8959122.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125089 91177308-0d34-0410-b5e6-96231b3b80d8
t2LDRpci with t2LDRi12.
There are a couple of problems with this.
1. The encoding for the literal and immediate constant are different.
Note bit 7 of the literal case is 'U' so it can be negative.
2. t2LDRi12 is now narrowed to tLDRpci before constant island pass is run.
So we end up never using the Thumb2 instruction, which ends up creating a
lot more constant islands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125074 91177308-0d34-0410-b5e6-96231b3b80d8
the active loop. This is generally desirable, and it avoids trouble
in situations such as the testcase in PR9123, though the failure
mode depends on use-list order, so it is infeasible to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125065 91177308-0d34-0410-b5e6-96231b3b80d8
After uses of a live range are removed, recompute the live range to only cover
the remaining uses. This is necessary after rematerializing the value before
some (but not all) uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125058 91177308-0d34-0410-b5e6-96231b3b80d8
parsing of operands introduced in r125030. As a small note, besides using a more
generic approach we can also have more descriptive output when debugging
llvm-mc, example:
mcr p7, #1, r5, c1, c1, #4
note: parsed instruction:
['mcr', <ARMCC::al>,
<coprocessor number: 7>,
1,
<register 73>,
<coprocessor register: 1>,
<coprocessor register: 1>,
4]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125052 91177308-0d34-0410-b5e6-96231b3b80d8
The vld1-lane, vld1-dup and vst1-lane instructions do not yet support using
post-increment versions, but all the rest of the NEON load/store instructions
should be handled now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125014 91177308-0d34-0410-b5e6-96231b3b80d8
These operations are expanded to pairs of loads or stores, and the first one
uses the address register update to produce the address for the second one.
So far, the second load/store has also updated the address register, just
for convenience, since that output has never been used. In anticipation of
actually supporting post-increment updates for these operations, this changes
the non-updating operations to use a non-updating load/store for the second
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125013 91177308-0d34-0410-b5e6-96231b3b80d8
failures with relocations.
The code committed is a first cut at compatibility for emitted relocations in
ELF .o.
Why do this? because existing ARM tools like emitting relocs symbols as
explicit relocations, not as section-offset relocs.
Result is that with these changes,
1) relocs are now substantially identical what to gcc outputs.
2) larger apps (including many spec2k tests) compile, cross-link, and pass
Added reminder fixme to tests for future conversion to .s form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124996 91177308-0d34-0410-b5e6-96231b3b80d8
Unified EmitTextAttribute for both Asm and Obj emission (.cpu only)
Added necessary cortex-A8 related attrs for codegen compat tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124995 91177308-0d34-0410-b5e6-96231b3b80d8
config.h.* have conditions whether each symbol is defined or not.
Autoconf and CMake may check symbols in libgcc.a for JIT on Mingw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124950 91177308-0d34-0410-b5e6-96231b3b80d8
<rdar://problem/8959122> illegal register operands for UMULL instruction in cfrac nightly test
I'm stil working on a unit test, but the case is:
rx = movcc rx, r3
r2 = ldr
r2, r3 = umull r2, r2
The anti-dep breaker should not convert this into an illegal instruction:
r2, r2 = umull
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124932 91177308-0d34-0410-b5e6-96231b3b80d8
a) Making it a per call site bonus for functions that we can move from
indirect to direct calls.
b) Reduces the bonus from 500 to 100 per call site.
c) Subtracts the size of the possible newly inlineable call from the
bonus to only add a bonus if we can inline a small function to devirtualize
it.
Also changes the bonus from a positive that's subtracted to a negative
that's added.
Fixes the remainder of rdar://8546196 by reducing the object file size
after inlining by 84%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124916 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to easily support 256-bit operations that don't have
native 256-bit support. This applies to integer operations, certain
types of shuffles and various othher things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124910 91177308-0d34-0410-b5e6-96231b3b80d8
If interference reaches the last split point, it is effectively live out and
should be marked as 'MustSpill'.
This can make a difference when the terminator uses a register. There is no way
that register can be reused in the outgoing CFG bundle, even if it isn't live
out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124900 91177308-0d34-0410-b5e6-96231b3b80d8
(yes, this is different from R_ARM_CALL)
- Adds a new method getARMBranchTargetOpValue() which handles the
necessary distinction between the conditional and unconditional br/bl
needed for ARM/ELF
At least for ARM mode, the needed fixup for conditional versus unconditional
br/bl is identical, but the ARM docs and existing ARM tools expect this
reloc type...
Added a few FIXME's for future naming fixups in ARMInstrInfo.td
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124895 91177308-0d34-0410-b5e6-96231b3b80d8
A live range cannot be split everywhere in a basic block. A split must go before
the first terminator, and if the variable is live into a landing pad, the split
must happen before the call that can throw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124894 91177308-0d34-0410-b5e6-96231b3b80d8
We should not be attempting a region split if it won't lead to at least one
directly allocatable interval. That could cause infinite splitting loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124893 91177308-0d34-0410-b5e6-96231b3b80d8
infrastructure. This makes lowering 256-bit vectors to 128-bit
vectors simple when 256-bit vector support is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124868 91177308-0d34-0410-b5e6-96231b3b80d8
precisely track pressure on a selection DAG, but we can at least keep
it balanced. This design accounts for various interesting aspects of
selection DAGS: register and subregister copies, glued nodes, dead
nodes, unused registers, etc.
Added SUnit::NumRegDefsLeft and ScheduleDAGSDNodes::RegDefIter.
Note: I disabled PrescheduleNodesWithMultipleUses when register
pressure is enabled, based on no evidence other than I don't think it
makes sense to have both enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124853 91177308-0d34-0410-b5e6-96231b3b80d8
When the live range is live through a block that doesn't use the register, but
that has interference, region splitting wants to split at the top and bottom of
the basic block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124839 91177308-0d34-0410-b5e6-96231b3b80d8
Allow a live range to end with a kill flag, but don't allow a kill flag that
doesn't end the live range.
This makes the machine code verifier more useful during register allocation when
kill flag computation is deferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124838 91177308-0d34-0410-b5e6-96231b3b80d8
If the found value is not live-through the block, we should only add liveness up
to the requested slot index. When the value is live-through, the whole block
should be colored.
Bug found by SSA verification in the machine code verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124812 91177308-0d34-0410-b5e6-96231b3b80d8
These end points come from the inserted copies, and can be passed directly to
useIntv. This simplifies the coloring code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124799 91177308-0d34-0410-b5e6-96231b3b80d8
matching EXTRACT_SUBVECTOR to VEXTRACTF128 along with support routines
to examine and translate index values. VINSERTF128 comes next. With
these two in place we can begin supporting more AVX operations as
INSERT/EXTRACT can be used as a fallback when 256-bit support is not
available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124797 91177308-0d34-0410-b5e6-96231b3b80d8
auto-simplifier). This has a big impact on Ada code, but not much else.
Unfortunately the impact is mostly negative! This is due to PR9004 (aka
SCCP failing to resolve conditional branch conditions in the destination
blocks of the branch), in which simple correlated expressions are not
resolved but complicated ones are, so simplifying has a bad effect!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124788 91177308-0d34-0410-b5e6-96231b3b80d8
Reversing the operands allows us to fold, but doesn't force us to. Also, at
this point the DAG is still being optimized, so the check for hasOneUse is not
very precise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124773 91177308-0d34-0410-b5e6-96231b3b80d8
The greedy register allocator revealed some problems with the value mapping in
SplitKit. We would sometimes start mapping values before all defs were known,
and that could change a value from a simple 1-1 mapping to a multi-def mapping
that requires ssa update.
The new approach collects all defs and register assignments first without
filling in any live intervals. Only when finish() is called, do we compute
liveness and mapped values. At this time we know with certainty which values map
to multiple values in a split range.
This also has the advantage that we can compute live ranges based on the
remaining uses after rematerializing at split points.
The current implementation has many opportunities for compile time optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124765 91177308-0d34-0410-b5e6-96231b3b80d8
overflow (nsw flag), which was disabled because it breaks 254.gap. I have
informed the GAP authors of the mistake in their code, and arranged for the
testsuite to use -fwrapv when compiling this benchmark.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124746 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the job of the later optzn passes easier, allowing the vast amount of
icmp transforms to chew on it.
We transform 840 switches in gcc.c, leading to a 16k byte shrink of the resulting
binary on i386-linux.
The testcase from README.txt now compiles into
decl %edi
cmpl $3, %edi
sbbl %eax, %eax
andl $1, %eax
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124724 91177308-0d34-0410-b5e6-96231b3b80d8
may be useful to understand "none", this is not the place for it. Tweak
the fix to Normalize while there: the fix added in 123990 works correctly,
but I like this way better. Finally, now that Triple understands some
non-trivial environment values, teach the unittests about them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124720 91177308-0d34-0410-b5e6-96231b3b80d8
that might have changed been affected by a merge elsewhere will have been
removed from the function set, and it isn't needed for performance because we
call grow() ahead of time to prevent reallocations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124717 91177308-0d34-0410-b5e6-96231b3b80d8
reassociation. No testcase, because I wasn't able to create a testcase
which actually demonstrates a problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124713 91177308-0d34-0410-b5e6-96231b3b80d8
prefix would be misinterpreted in some cases on 32-bit
x86 platforms. Thanks to Olivier Meurant for identifying
the bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124709 91177308-0d34-0410-b5e6-96231b3b80d8
the load, then it may be legal to transform the load and store to integer
load and store of the same width.
This is done if the target specified the transformation as profitable. e.g.
On arm, this can transform:
vldr.32 s0, []
vstr.32 s0, []
to
ldr r12, []
str r12, []
rdar://8944252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124708 91177308-0d34-0410-b5e6-96231b3b80d8
