a subtarget hook to enable. Unconditionally add to the pass pipeline
for targets that might want to use it. No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209340 91177308-0d34-0410-b5e6-96231b3b80d8
ISD::VSELECT mask uses 1 to identify the first argument and 0 to identify the
second argument.
On the other hand, BLENDI uses 0 to identify the first argument and 1 to
identify the second argument.
Fix the generation of the blend mask to account for this difference.
The bug did not show up with r209043, because we were not checking for the
actual arguments of the blend instruction!
This commit also fixes the test cases.
Note: The same mask works for the BLENDr variant because the arguments are
swapped during instruction selection (see the BLENDXXrr patterns).
<rdar://problem/16975435>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209324 91177308-0d34-0410-b5e6-96231b3b80d8
According to Intel Software Optimization Manual on Silvermont in some cases LEA
is better to be replaced with ADD instructions:
"The rule of thumb for ADDs and LEAs is that it is justified to use LEA
with a valid index and/or displacement for non-destructive destination purposes
(especially useful for stack offset cases), or to use a SCALE.
Otherwise, ADD(s) are preferable."
Differential Revision: http://reviews.llvm.org/D3826
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209198 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the X86 backend doesn't support types larger than i128 very well. For
example an i192 multiply will assert in codegen when the 2nd argument is a constant and the constant got hoisted.
This fix changes the cost model to never hoist constants for types larger than
i128. Once the codegen issues have been resolved, the cost model can be updated
to allow also larger types.
This is related to <rdar://problem/16954938>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209162 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions TZCNT (requires BMI1) and LZCNT (requires LZCNT), always
provide the operand size as output if the input operand is zero.
We can take advantage of this knowledge during instruction selection
stage in order to simplify a few corner case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209159 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When inserting an element that's coming from a vector load or a broadcast
of a vector (or scalar) load, combine the load into the insertps
instruction.
Added PerformINSERTPSCombine for the case where we need to fix the load
(load of a vector + insertps with a non-zero CountS).
Added patterns for the broadcasts.
Also added tests for SSE4.1, AVX, and AVX2.
Reviewers: delena, nadav, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3581
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209156 91177308-0d34-0410-b5e6-96231b3b80d8
- On ARM/ARM64 we get a vrev because the shuffle matching code is really smart. We still unroll anything that's not v4i32 though.
- On X86 we get a pshufb with SSSE3. Required more cleverness in isShuffleMaskLegal.
- On PPC we get a vperm for v8i16 and v4i32. v2i64 is unrolled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209123 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly a mechanical change changing all the call sites to the newer
chained-function construction pattern. This removes the horrible 15-parameter
constructor for the CallLoweringInfo in favour of setting properties of the call
via chained functions. No functional change beyond the removal of the old
constructors are intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209082 91177308-0d34-0410-b5e6-96231b3b80d8
were added in SSE2, no SSSE3. Found this while auditing all uses of
SSSE3 in the X86 target. I don't actually expect this to make
a significant difference on anything and I don't have any detailed test
cases but I updated the existing test cases that already covered some of
this code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209056 91177308-0d34-0410-b5e6-96231b3b80d8
vselects with constant masks, after legalization, will get turned into
specialized shuffle_vectors so they can be matched to blend+imm
instructions.
Fixed some tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209044 91177308-0d34-0410-b5e6-96231b3b80d8
LowerVSELECT will, if possible, generate a X86ISD::BLENDI DAG node if the
condition is constant and we can emit that instruction, given the
subtarget.
This is not enough for all cases. An additional SELECTCombine optimization
will be committed.
Fixed tests that were expecting variable blends but where a blend+imm can
be generated.
Added test where we can't emit blend+immediate.
Added avx2 blend+imm tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209043 91177308-0d34-0410-b5e6-96231b3b80d8
No functionality change intended. The types that previously were set to
lower as Expand or Legal are doing the same thing with this lowering
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209042 91177308-0d34-0410-b5e6-96231b3b80d8
In AT&T syntax, we should probably print the full "movl" or "movw". TableGen
used to ignore these aliases because it was miscounting the number of operands.
This fixes the issue.
This will be tested when the TableGen "should I print this Alias"
heuristic is fixed (very soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208963 91177308-0d34-0410-b5e6-96231b3b80d8
Added target specific combine rules to fold blend intrinsics according
to the following rules:
1) fold(blend A, A, Mask) -> A;
2) fold(blend A, B, <allZeros>) -> A;
3) fold(blend A, B, <allOnes>) -> B.
Added two new tests to verify that the new folding rules work for all
the optimized blend intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208895 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, TableGen assumed that every aliased operand consumed precisely 1
MachineInstr slot (this was reasonable because until a couple of days ago,
nothing more complicated was eligible for printing).
This allows a couple more ARM64 aliases to print so we can remove the special
code.
On the X86 side, I've gone for explicit AT&T size specifiers as the default, so
turned off a few of the aliases that would have just started printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208880 91177308-0d34-0410-b5e6-96231b3b80d8
To get at least one use of the change (and some actual tests) in with its
commit, I've enabled the AArch64 & ARM64 NEON mov aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208867 91177308-0d34-0410-b5e6-96231b3b80d8
For example
tzcntl %edi, %ebx
testl %edi, %edi
je .label
can be rewritten into
tzcntl %edi, %ebx
jb .label
A minor complication is that tzcnt sets CF instead of ZF when the input
is zero, we have to rewrite users of the flags from ZF to CF. Currently
we recognize patterns using lzcnt, tzcnt and popcnt.
Differential Revision: http://reviews.llvm.org/D3454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208788 91177308-0d34-0410-b5e6-96231b3b80d8
r208453 added support for having sret on the second parameter. In that
change, the code for copying sret into a virtual register was hoisted
into the loop that lowers formal parameters. This caused a "Wrong
topological sorting" assertion failure during scheduling when a
parameter is passed in memory. This change undoes that by creating a
second loop that deals with sret.
I'm worried that this fix is incomplete. I don't fully understand the
dependence issues. However, with this change we produce the same DAGs
we used to produce, so if they are broken, they are just as broken as
they have always been.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208637 91177308-0d34-0410-b5e6-96231b3b80d8
1) Changed gather and scatter intrinsics. Now they are aligned with GCC built-ins. There is no more non-masked form. Masked intrinsic receives -1 if all lanes are executed.
2) I changed the function that works with intrinsics inside X86ISelLowering.cpp. I put all intrinsics in one table. I did it for INTRINSICS_W_CHAIN and plan to put all intrinsics from WO_CHAIN set to the same table in order to avoid the long-long "switch". (I wanted to use static map initialization that allowed by C++11 but I wasn't able to compile it on VS2012).
3) I added gather/scatter prefetch intrinsics.
4) I fixed MRMm encoding for masked instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208522 91177308-0d34-0410-b5e6-96231b3b80d8
We must validate the value type in TLI::getRegisterByName, because if we
don't and the wrong type was used with the IR intrinsic, then we'll assert
(because we won't be able to find a valid register class with which to
construct the requested copy operation). For PPC64, additionally, the type
information is necessary to decide between the 64-bit register and the 32-bit
subregister.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208508 91177308-0d34-0410-b5e6-96231b3b80d8
When lowering build_vector to an insertps, we would still lower it, even
if the source vectors weren't v4x32. This would break on avx if the source
was a v8x32. We now check the type of the source vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208487 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r200561.
This calling convention was an attempt to match the MSVC C++ ABI for
methods that return structures by value. This solution didn't scale,
because it would have required splitting every CC available on Windows
into two: one for methods and one for free functions.
Now that we can put sret on the second arg (r208453), and Clang does
that (r208458), revert this hack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208459 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC always places the implicit sret parameter after the implicit this
parameter of instance methods. We used to handle this for
x86_thiscallcc by allocating the sret parameter on the stack and leaving
the this pointer in ecx, but that doesn't handle alternative calling
conventions like cdecl, stdcall, fastcall, or the win64 convention.
Instead, change the verifier to allow sret on the second parameter.
This also requires changing the Mips and X86 backends to return the
argument with the sret parameter, instead of assuming that the sret
parameter comes first.
The Sparc backend also returns sret parameters in a register, but I
wasn't able to update it to handle secondary sret parameters. It
currently calls report_fatal_error if you feed it an sret in the second
parameter.
Reviewers: rafael.espindola, majnemer
Differential Revision: http://reviews.llvm.org/D3617
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208453 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to combine packed SSE2/AVX2 arithmetic shift
intrinsics.
The rules are:
- Always fold a packed arithmetic shift by zero to its first operand;
- Convert a packed arithmetic shift intrinsic dag node into a ISD::SRA only if
the shift count is known to be smaller than the vector element size.
This patch also teaches to function 'getTargetVShiftByConstNode' how fold
target specific vector shifts by zero.
Added two new tests to verify that the DAGCombiner is able to fold
sequences of SSE2/AVX2 packed arithmetic shift calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208342 91177308-0d34-0410-b5e6-96231b3b80d8
The old method used by X86TTI to determine partial-unrolling thresholds was
messy (because it worked by testing target features), and also would not
correctly identify the target CPU if certain target features were disabled.
After some discussions on IRC with Chandler et al., it was decided that the
processor scheduling models were the right containers for this information
(because it is often tied to special uop dispatch-buffer sizes).
This does represent a small functionality change:
- For generic x86-64 (which uses the SB model and, thus, will get some
unrolling).
- For AMD cores (because they still currently use the SB scheduling model)
- For Haswell (based on benchmarking by Louis Gerbarg, it was decided to bump
the default threshold to 50; we're working on a test case for this).
Otherwise, nothing has changed for any other targets. The logic, however, has
been moved into BasicTTI, so other targets may now also opt-in to this
functionality simply by setting LoopMicroOpBufferSize in their processor
model definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208289 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Vectors built with zeros and elements in the same order as another
(source) vector are optimized to be built using a single insertps
instruction.
Also optimize when we move one element in a vector to a different place
in that vector while zeroing out some of the other elements.
Further optimizations are possible, described in TODO comments.
I will be implementing at least some of them in the near future.
Added some tests for different cases where this optimization triggers.
Reviewers: nadav, delena, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3521
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208271 91177308-0d34-0410-b5e6-96231b3b80d8
The loop stream detector (LSD) on modern Intel cores, which optimizes the
execution of small loops, has limits on the number of taken branches in
addition to uop-count limits (modern AMD cores have similar limits).
Unfortunately, at the IR level, estimating the number of branches that will be
taken is difficult. For one thing, it strongly depends on later passes (block
placement, etc.). The original implementation took a conservative approach and
limited the maximal BB DFS depth of the loop. However, fairly-extensive
benchmarking by several of us has revealed that this is the wrong approach. In
fact, there are zero known cases where the branch limit prevents a detrimental
unrolling (but plenty of cases where it does prevent beneficial unrolling).
While we could improve the current branch counting logic by incorporating
branch probabilities, this further complication seems unjustified without a
motivating regression. Instead, unless and until a regression appears, the
branch counting will be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208255 91177308-0d34-0410-b5e6-96231b3b80d8
Given a FMA family (e.g., 213, 231), not all the variants (i.e., register or
memory) are commutable.
E.g., for the 213 family (with the syntax src1, src2, src3):
fmaXXX213 A, B, reg3/mem3 == fmaXXX213 B, A, reg3/mem3
Now consider the 231 family:
fmaXXX231 A, B, reg3 == fmaXXX231 A, reg3, B
But
fmaXXX231 A, B, mem3 != fmaXXX231 A, mem3, B
Indeed, mem3 cannot be the second argument of the memory variant of fmaXXX231.
Working on a reduced test case!
<rdar://problem/16800495>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208252 91177308-0d34-0410-b5e6-96231b3b80d8
default architecture for reasonable modern x86 processors, actually be
modern. This processor model should essentially be "tuned" for modern
x86 chips as much as possible without undue penalties on any specific
architecture. Previously we weren't even using the nice scheduling
models. There are a few other tweaks needed here, but this change at
least I have benchmarked across a decent swatch of chips (intel's
clovertown, westmere, and sandybridge; amd's istanbul) and seen no
significant regressions.
If anyone has suggested ways to test this, just let me know. Somewhat
alarmingly, no existing tests failed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208230 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, the backend always emitted a store+load sequence to
bitconvert from f64 to i64 the input operand of a ISD::BITCAST dag node that
performed a bitconvert from type MVT::f64 to type MVT::v2i32. The resulting
i64 node was then used to build a v2i32 vector.
With this patch, the backend now produces a cheaper SCALAR_TO_VECTOR from
MVT::f64 to MVT::v2f64. That SCALAR_TO_VECTOR is then followed by a "free"
bitcast to type MVT::v4i32. The elements of the resulting
v4i32 are then extracted to build a v2i32 vector (which is illegal and
therefore promoted to MVT::v2i64).
This is in general cheaper than emitting a stack store+load sequence
to bitconvert the operand from type f64 to type i64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208107 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208104 91177308-0d34-0410-b5e6-96231b3b80d8
The Win64 docs are very clear that anything larger than 8 bytes is
passed by reference, and GCC MinGW64 honors that for __modti3 and
friends.
Patch by Jameson Nash!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208029 91177308-0d34-0410-b5e6-96231b3b80d8
Both MinGW and cygwin (i686) construct export directives without the global
leader prefix. This is mostly due to the fact that they use GNU ld which does
not correctly handle the export directive. This apparently has been been broken
for a while. However, this was recently reported as being broken by
mingwandroid and diorcety of the msys2 project.
Remove the global leader prefix if targeting MinGW or cygwin, otherwise, retain
the global leader prefix. Add an explicit test for cygwin's behaviour of export
directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207926 91177308-0d34-0410-b5e6-96231b3b80d8
Create a helper function to generate the export directive. This was previously
duplicated inline to handle export directives for variables and functions. This
also enables the use of range-based iterators for the generation of the
directive rather than the traditional loops. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207925 91177308-0d34-0410-b5e6-96231b3b80d8
The fix itself is fairly simple: move getAccessVariant to MCValue so that we
replace the old weak expression evaluation with the far more general
EvaluateAsRelocatable.
This then requires that EvaluateAsRelocatable stop when it finds a non
trivial reference kind. And that in turn requires the ELF writer to look
harder for weak references.
Last but not least, this found a case where we were being bug by bug
compatible with gas and accepting an invalid input. I reported pr19647
to track it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207920 91177308-0d34-0410-b5e6-96231b3b80d8
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
This change is like r206101, but for X86.
rdar://problem/16190769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207692 91177308-0d34-0410-b5e6-96231b3b80d8
Only emit calls to compiler-rt asm routines on platforms where they are
present (currently limited to linux i386/x86_64).
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207651 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, musttail codegen is relying on sibcall optimization, and
reporting a fatal error if fails. Sibcall optimization fails when stack
arguments need to be modified, which is insufficient for musttail.
The logic for moving arguments in memory safely is already implemented
for GuaranteedTailCallOpt. This change merely arranges for musttail
calls to use it.
No functional change for GuaranteedTailCallOpt.
Reviewers: espindola
Differential Revision: http://reviews.llvm.org/D3493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207598 91177308-0d34-0410-b5e6-96231b3b80d8
X86_MAX_OPERANDS is changed to unsigned.
Also, add range-based for loops for affected loops. This in turn
needed an ArrayRef instead of a pointer-to-array in
InternalInstruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207413 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a target specific streamer, X86WinCOFFStreamer, which handles
the target specific behaviour (e.g. WinEH). This is mostly to ensure that
differences between ARM and X86 remain disjoint and do not accidentally cross
boundaries. This is the final staging change for enabling object emission for
Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207344 91177308-0d34-0410-b5e6-96231b3b80d8
This gets us pretty code for divs of i16 vectors. Turn the existing
intrinsics into the corresponding nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207317 91177308-0d34-0410-b5e6-96231b3b80d8
Scaling factors are not free on X86 because every "complex" addressing mode
breaks the related instruction into 2 allocations instead of 1.
<rdar://problem/16730541>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207301 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we're doing a v4f32/v4i32 shuffle on x86 with SSE4.1, we can lower
certain shufflevectors to an insertps instruction:
When most of the shufflevector result's elements come from one vector (and
keep their index), and one element comes from another vector or a memory
operand.
Added tests for insertps optimizations on shufflevector.
Added support and tests for v4i32 vector optimization.
Reviewers: nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3475
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207291 91177308-0d34-0410-b5e6-96231b3b80d8
Change the object streamer selection to a switch from a series of if conditions.
Rather than defaulting to ELF, require that an ELF format is requested. The
Windows/!ELF is maintained as MachO would have been selected first and will
still provide a MachO format. Add an assertion that if COFF is requested that
the target platform is Windows as only WinCOFF object emission is currently
supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207200 91177308-0d34-0410-b5e6-96231b3b80d8
This is similar to the 'tail' marker, except that it guarantees that
tail call optimization will occur. It also comes with convervative IR
verification rules that ensure that tail call optimization is possible.
Reviewers: nicholas
Differential Revision: http://llvm-reviews.chandlerc.com/D3240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207143 91177308-0d34-0410-b5e6-96231b3b80d8
This patch:
- Adds two new X86 builtin intrinsics ('int_x86_rdtsc' and
'int_x86_rdtscp') as GCCBuiltin intrinsics;
- Teaches the backend how to lower the two new builtins;
- Introduces a common function to lower READCYCLECOUNTER dag nodes
and the two new rdtsc/rdtscp intrinsics;
- Improves (and extends) the existing x86 test 'rdtsc.ll'; now test 'rdtsc.ll'
correctly verifies that both READCYCLECOUNTER and the two new intrinsics
work fine for both 64bit and 32bit Subtargets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207127 91177308-0d34-0410-b5e6-96231b3b80d8
I discovered this const-hole while attempting to coalesnce the Symbol
and SymbolMap data structures. There's some pending issues with that,
but I figured this change was easy to flush early.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207124 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to compile
return (mask & 0x8 ? a : b);
into
testb $8, %dil
cmovnel %edx, %esi
instead of
andl $8, %edi
shrl $3, %edi
cmovnel %edx, %esi
which we formed previously because dag combiner canonicalizes setcc of and into shift.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207088 91177308-0d34-0410-b5e6-96231b3b80d8
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206971 91177308-0d34-0410-b5e6-96231b3b80d8
Evidently tablegen doesn't infer this from the HasBMI2 predicate on the BZHI
instructions. This should fix the recent bot failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206885 91177308-0d34-0410-b5e6-96231b3b80d8
system headers above the includes of generated '.inc' files that
actually contain code. In a few targets this was already done pretty
consistently, but it wasn't done *really* consistently anywhere. It is
strictly cleaner IMO and necessary in a bunch of places where the
DEBUG_TYPE is referenced from the generated code. Consistency with the
necessary places trumps. Hopefully the build bots are OK with the
movement of intrin.h...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206838 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
With this MC is able to handle _GLOBAL_OFFSET_TABLE_ in 64 bit mode, which is
needed for medium and large code models.
This fixes pr19470.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206793 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The INSERTPS pattern fragment was called insrtps (mising 'e'), which
would make it harder to grep for the patterns related to this instruction.
Renaming it to use the proper instruction name.
Reviewers: nadav
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3443
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206779 91177308-0d34-0410-b5e6-96231b3b80d8
It can be reverted a few days later, after X86Disassembler.d is updated not to contain "X86Disassembler.c".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206758 91177308-0d34-0410-b5e6-96231b3b80d8
Generating BZHI in the variable mask case, i.e. (and X, (sub (shl 1, N), 1)),
was already supported, but we were missing the constant-mask case. This patch
fixes that.
<rdar://problem/15480077>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206738 91177308-0d34-0410-b5e6-96231b3b80d8
reason to expose a global symbol 'decodeInstruction' nor to pollute the global
scope with a bunch of external linkage entities (some of which conflict with
others elsewhere in LLVM).
This is just the initial transition to C++; more cleanups to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206717 91177308-0d34-0410-b5e6-96231b3b80d8
Win64 stack unwinder gets confused when execution flow "falls through" after
a call to 'noreturn' function. This fixes the "missing epilogue" problem by
emitting a trap instruction for IR 'unreachable' on x86_x64-pc-windows.
A secondary use for it would be for anyone wanting to make double-sure that
'noreturn' functions, indeed, do not return.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206684 91177308-0d34-0410-b5e6-96231b3b80d8
For a 256-bit BUILD_VECTOR consisting mostly of shuffles of 256-bit vectors,
both the BUILD_VECTOR and its operands may need to be legalized in multiple
steps. Consider:
(v8f32 (BUILD_VECTOR (extract_vector_elt (v8f32 %vreg0,) Constant<1>),
(extract_vector_elt %vreg0, Constant<2>),
(extract_vector_elt %vreg0, Constant<3>),
(extract_vector_elt %vreg0, Constant<4>),
(extract_vector_elt %vreg0, Constant<5>),
(extract_vector_elt %vreg0, Constant<6>),
(extract_vector_elt %vreg0, Constant<7>),
%vreg1))
a. We can't build a 256-bit vector efficiently so, we need to split it into
two 128-bit vecs and combine them with VINSERTX128.
b. Operands like (extract_vector_elt (v8f32 %vreg0), Constant<7>) needs to be
split into a VEXTRACTX128 and a further extract_vector_elt from the
resulting 128-bit vector.
c. The extract_vector_elt from b. is lowered into a shuffle to the first
element and a movss.
Depending on the order in which we legalize the BUILD_VECTOR and its
operands[1], buildFromShuffleMostly may be faced with:
(v4f32 (BUILD_VECTOR (extract_vector_elt
(vector_shuffle<1,u,u,u> (extract_subvector %vreg0, Constant<4>), undef),
Constant<0>),
(extract_vector_elt
(vector_shuffle<2,u,u,u> (extract_subvector %vreg0, Constant<4>), undef),
Constant<0>),
(extract_vector_elt
(vector_shuffle<3,u,u,u> (extract_subvector %vreg0, Constant<4>), undef),
Constant<0>),
%vreg1))
In order to figure out the underlying vector and their identity we need to see
through the shuffles.
[1] Note that the order in which operations and their operands are legalized is
only guaranteed in the first iteration of LegalizeDAG.
Fixes <rdar://problem/16296956>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206634 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to efficiently lower logical and
arithmetic packed shifts on both SSE and AVX/AVX2 machines.
When possible, instead of scalarizing a vector shift, the backend should try
to expand the shift into a sequence of two packed shifts by immedate count
followed by a MOVSS/MOVSD.
Example
(v4i32 (srl A, (build_vector < X, Y, Y, Y>)))
Can be rewritten as:
(v4i32 (MOVSS (srl A, <Y,Y,Y,Y>), (srl A, <X,X,X,X>)))
[with X and Y ConstantInt]
The advantage is that the two new shifts from the example would be lowered into
X86ISD::VSRLI nodes. This is always cheaper than scalarizing the vector into
four scalar shifts plus four pairs of vector insert/extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206316 91177308-0d34-0410-b5e6-96231b3b80d8
This patch re-introduces the MCContext member that was removed from
MCDisassembler in r206063, and requires that an MCContext be passed in at
MCDisassembler construction time. (Previously the MCContext member had been
initialized in an ad-hoc fashion after construction). The MCCContext member
can be used by MCDisassembler sub-classes to construct constant or
target-specific MCExprs.
This patch updates disassemblers for in-tree targets, and provides the
MCRegisterInfo instance that some disassemblers were using through the
MCContext (previously those backends were constructing their own
MCRegisterInfo instances).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206241 91177308-0d34-0410-b5e6-96231b3b80d8
*not* Subtarget->hasSSE1()
*but* __SSE__, the flag that LLVM libraries are compiled
The callback calls internal LLVM JIT libraries. It may be built with -msse (or above).
FIXME: JIT may use "host" instead of "generic" by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206240 91177308-0d34-0410-b5e6-96231b3b80d8
I found this from a particular GDB test suite case of inlining
(something similar is provided as a test case) but came across a few
other related cases (other callers of the same functions, and one other
instance of the same coding mistake in a separate function).
I'm not sure what the best way to test this is (let alone to cover the
other cases I discovered), so hopefully this sufficies - open to ideas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206130 91177308-0d34-0410-b5e6-96231b3b80d8
This logic is properly in the realm of whatever is creating the
TargetMachine. This makes plain 'llc foo.ll' consistent across
heterogenous machines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206094 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the -segmented-stacks command line flag in favor of a
per-function "split-stack" attribute.
Patch by Luqman Aden and Alex Crichton!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205997 91177308-0d34-0410-b5e6-96231b3b80d8
AVX supports logical operations using an operand from memory. Unfortunately
because integer operations were not added until AVX2 the AVX1 logical
operation's types were preventing the isel from folding the loads. In a limited
number of cases the peephole optimizer would fold the loads, but most were
missed. This patch adds explicit patterns with appropriate casts in order for
these loads to be folded.
The included test cases run on reduced examples and disable the peephole
optimizer to ensure the folds are being pattern matched.
Patch by Louis Gerbarg <lgg@apple.com>
rdar://16355124
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205938 91177308-0d34-0410-b5e6-96231b3b80d8
Before, we would have conditional operators where one side of the
operator would be of type RelocationTypeAMD64 and the other is of type
RelocationTypeI386. GCC would noisly warn with -Wenum-compare
diagnostic.
Instead, refactor the code so it is more like the X86 ELF object writer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205752 91177308-0d34-0410-b5e6-96231b3b80d8
This way, you can check the number of sign bits in the
operands. The depth parameter it already has is pretty useless
without this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205649 91177308-0d34-0410-b5e6-96231b3b80d8
TargetInstrInfo::findCommutedOpIndices to enable VFMA*231 commutation, rather
than abusing commuteInstruction.
Thanks very much for the suggestion guys!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205489 91177308-0d34-0410-b5e6-96231b3b80d8
on FMA3 memory operands. FMA3 instructions are VEX encoded, so they can load
from unaligned memory.
Testcase to follow, along with related patch.
<rdar://problem/16478629>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205472 91177308-0d34-0410-b5e6-96231b3b80d8
and isTargetCygwin() to isTargetWindowsCygwin() to be consistent with the
four Windows environments in Triple.h.
Suggestion by Saleem Abdulrasool!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205393 91177308-0d34-0410-b5e6-96231b3b80d8
This provides an initial implementation of getUnrollingPreferences for x86.
getUnrollingPreferences is used by the generic (concatenation) unroller, which
is distinct from the unrolling done by the loop vectorizer. Many modern x86
cores have some kind of uop cache and loop-stream detector (LSD) used to
efficiently dispatch small loops, and taking full advantage of this requires
unrolling small loops (small here means 10s of uops).
These caches also have limits on the number of taken branches in the loop, and
so we also cap the loop unrolling factor based on the maximum "depth" of the
loop. This is currently calculated with a partial DFS traversal (partial
because it will stop early if the path length grows too much). This is still an
approximation, and one that is both conservative (because it does not account
for branches eliminated via block placement) and optimistic (because it is only
recording the maximum depth over minimum paths). Nevertheless, because the
loops that fit in these uop caches are so small, it is not clear how much the
details matter.
The original set of patches posted for review produced the following test-suite
performance results (from the TSVC benchmark) at that time:
ControlLoops-dbl - 13% speedup
ControlLoops-flt - 15% speedup
Reductions-dbl - 7.5% speedup
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205348 91177308-0d34-0410-b5e6-96231b3b80d8
Identical to Win32 method except the GS segment register is used for TLS
instead of FS and pvArbitrary is at TEB offset 0x28 instead of 0x14.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205342 91177308-0d34-0410-b5e6-96231b3b80d8
Pretty obvious follow-on to r205159 to also handle conversion from double
besides float.
Fixes <rdar://problem/16373208>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205253 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MinGW OS was Triple::MinGW and Cygwin was Triple::Cygwin
and now it is Triple::Win32 with Environment being GNU or Cygwin.
So,
TheTriple.getOS() == Triple::Win32
is replaced by
TheTriple.isWindowsMSVCEnvironment()
and
(TheTriple.getOS() == Triple::MinGW32 || TheTriple.getOS() == Triple::Cygwin)
is replaced by
TheTriple.isOSCygMing()
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205170 91177308-0d34-0410-b5e6-96231b3b80d8
There is no direct AVX instruction to convert to unsigned. I have some ideas
how we may be able to do this with three vector instructions but the current
backend just bails on this to get it scalarized.
See the comment why we need to adjust the cost returned by BasicTTI.
The test is a bit roundabout (and checks assembly rather than bit code) because
I'd like it to work even if at some point we could vectorize this conversion.
Fixes <rdar://problem/16371920>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205159 91177308-0d34-0410-b5e6-96231b3b80d8
FYI, !isWindowsGNUEnvironment() is insufficient. It missed cygwin.
FIXME: The name "isTargetWindows" should be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205124 91177308-0d34-0410-b5e6-96231b3b80d8
I started trying to fix a small issue, but this code has seen a small fix too
many.
The old code was fairly convoluted. Some of the issues it had:
* It failed to check if a symbol difference was in the some section when
converting a relocation to pcrel.
* It failed to check if the relocation was already pcrel.
* The pcrel value computation was wrong in some cases (relocation-pc.s)
* It was missing quiet a few cases where it should not convert symbol
relocations to section relocations, leaving the backends to patch it up.
* It would not propagate the fact that it had changed a relocation to pcrel,
requiring a quiet nasty work around in ARM.
* It was missing comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205076 91177308-0d34-0410-b5e6-96231b3b80d8
Emit 32-bit register names instead of 64-bit register names if the target does
not have 64-bit general purpose registers.
<rdar://problem/14653996>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205067 91177308-0d34-0410-b5e6-96231b3b80d8
WinCOFF cannot form PC relative relocations to support absolute
MCValues. We should reenable this once WinCOFF supports emission of
IMAGE_REL_I386_REL32 relocations.
This fixes PR19272.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205058 91177308-0d34-0410-b5e6-96231b3b80d8
Construct a uniform Windows target triple nomenclature which is congruent to the
Linux counterpart. The old triples are normalised to the new canonical form.
This cleans up the long-standing issue of odd naming for various Windows
environments.
There are four different environments on Windows:
MSVC: The MS ABI, MSVCRT environment as defined by Microsoft
GNU: The MinGW32/MinGW32-W64 environment which uses MSVCRT and auxiliary libraries
Itanium: The MSVCRT environment + libc++ built with Itanium ABI
Cygnus: The Cygwin environment which uses custom libraries for everything
The following spellings are now written as:
i686-pc-win32 => i686-pc-windows-msvc
i686-pc-mingw32 => i686-pc-windows-gnu
i686-pc-cygwin => i686-pc-windows-cygnus
This should be sufficiently flexible to allow us to target other windows
environments in the future as necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204977 91177308-0d34-0410-b5e6-96231b3b80d8
This adds back r204781.
Original message:
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204934 91177308-0d34-0410-b5e6-96231b3b80d8
and v4i64->v4f64.
The new costs match what we did for SSE2 and reflect the reality of our codegen.
<rdar://problem/16381225>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204884 91177308-0d34-0410-b5e6-96231b3b80d8
> For functions where esi is used as base pointer, we would previously fall ba
> from lowering memcpy with "rep movs" because that clobbers esi.
>
> With this patch, we just store esi in another physical register, and restore
> it afterwards. This adds a little bit of register preassure, but the more
> efficient memcpy should be worth it.
>
> Differential Revision: http://llvm-reviews.chandlerc.com/D2968
This didn't work. I was ending up with code like this:
lea edi,[esi+38h]
mov ecx,0Fh
mov edx,esi
mov esi,ebx
rep movs dword ptr es:[edi],dword ptr [esi]
lea ecx,[esi+74h] <-- Ooops, we're now using esi before restoring it from edx.
add ebx,3Ch
mov esi,edx
I guess if we want to do this we need stronger glue or something, or doing the expansion
much later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204829 91177308-0d34-0410-b5e6-96231b3b80d8
Implementing the LLVM part of the call to __builtin___clear_cache
which translates into an intrinsic @llvm.clear_cache and is lowered
by each target, either to a call to __clear_cache or nothing at all
incase the caches are unified.
Updating LangRef and adding some tests for the implemented architectures.
Other archs will have to implement the method in case this builtin
has to be compiled for it, since the default behaviour is to bail
unimplemented.
A Clang patch is required for the builtin to be lowered into the
llvm intrinsic. This will be done next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204802 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r204781.
I will follow up to with msan folks to see what is what they
were trying to do with aliases to weak aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204784 91177308-0d34-0410-b5e6-96231b3b80d8
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204781 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the different broadcast instructions to the ReplaceableInstrsAVX2 table.
That way the ExeDepsFix pass can take better decisions when AVX2 broadcasts are
across domain (int <-> float).
In particular, prior to this patch we were generating:
vpbroadcastd LCPI1_0(%rip), %ymm2
vpand %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0 ## <- domain change penalty
Now, we generate the following nice sequence where everything is in the float
domain:
vbroadcastss LCPI1_0(%rip), %ymm2
vandps %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0
<rdar://problem/16354675>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204770 91177308-0d34-0410-b5e6-96231b3b80d8
If getElementPtr uses a constant as base pointer, then make the constant opaque.
This prevents constant folding it with the offset. The offset can usually be
encoded in the load/store instruction itself and the base address doesn't have
to be rematerialized several times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204739 91177308-0d34-0410-b5e6-96231b3b80d8
The cost for the first four stackmap operands was always TCC_Free.
This is only true for the first two operands. All other operands
are TCC_Free if they are within 64bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204738 91177308-0d34-0410-b5e6-96231b3b80d8
This used to resort to splitting the 256-bit operation into two 128-bit
shuffles and then recombining the results.
Fixes <rdar://problem/16167303>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204735 91177308-0d34-0410-b5e6-96231b3b80d8
I found three implementations of this. This splits it out into a new function
and uses it from the three places.
My plan is to add a fourth use when lowering a vector_shuffle:v16i16.
Compared the assembly output of test/CodeGen/X86 before and after.
The only change is due to how the first PSHUFB was generated in
LowerVECTOR_SHUFFLEv8i16. If the shuffle mask specified undef (i.e. -1), the
old implementation would write -1 * 2 and -1 * 2 + 1 (254 and 255) in the
control mask. Now we write 0x80. These are of course interchangeable since
bit 7 decides if a constant zero is written in the result byte. The other
instances of this code use 0x80 consistently.
Related to <rdar://problem/16167303>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204734 91177308-0d34-0410-b5e6-96231b3b80d8
Those patterns are used when the load cannot be folded into the related broadcast
during the select phase.
This happens when the load gets additional uses that were not anticipated during
the previous lowering phases (constant vector to constant load, then constant
load reused) or when selection DAG is not able to prove that folding the load
will not create a cycle in the DAG.
<rdar://problem/16074331>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204631 91177308-0d34-0410-b5e6-96231b3b80d8
This can be observed with the old testcase of CodeGen/X86/pr12312.ll:
47c47
< vorps %ymm0, %ymm1, %ymm0
---
> vorps %ymm1, %ymm0, %ymm0
97c97
< vorps %ymm1, %ymm0, %ymm0
---
> vorps %ymm0, %ymm1, %ymm0
The vector VecIns is populated with all the values from VecInMap. This is done
while iterating VecInMap. VecInMap uses a hash of pointer values so the
resulting order can vary depending on the memory layout.
The fix is to populate the vector VecIns earlier as VecInMap is populated.
This is done in DAG traversal order.
Fixes <rdar://problem/16398806>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204623 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the target hook to take also the operand index into account when
calculating the cost of the constant materialization.
Related to <rdar://problem/16381500>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204435 91177308-0d34-0410-b5e6-96231b3b80d8
This commit extends the coverage of the constant hoisting pass, adds additonal
debug output and updates the function names according to the style guide.
Related to <rdar://problem/16381500>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204389 91177308-0d34-0410-b5e6-96231b3b80d8
Given
bar = foo + 4
.long bar
MC would eat the 4. GNU as includes it in the relocation. The rule seems to be
that a variable that defines a symbol is used in the relocation and one that
does not define a symbol is evaluated and the result included in the relocation.
Fixing this unfortunately required some other changes:
* Since the variable is now evaluated, it would prevent the ELF writer from
noticing the weakref marker the elf streamer uses. This patch then replaces
that with a VariantKind in MCSymbolRefExpr.
* Using VariantKind then requires us to look past other VariantKind to see
.weakref bar,foo
call bar@PLT
doing this also fixes
zed = foo +2
call zed@PLT
so that is a good thing.
* Looking past VariantKind means that the relocation selection has to use
the fixup instead of the target.
This is a reboot of the previous fixes for MC. I will watch the sanitizer
buildbot and wait for a build before adding back the previous fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204294 91177308-0d34-0410-b5e6-96231b3b80d8
For functions where esi is used as base pointer, we would previously fall back
from lowering memcpy with "rep movs" because that clobbers esi.
With this patch, we just store esi in another physical register, and restore
it afterwards. This adds a little bit of register preassure, but the more
efficient memcpy should be worth it.
Differential Revision: http://llvm-reviews.chandlerc.com/D2968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204174 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
X86BaseInfo.h defines an enum for the offset of each operand in a memory operand
sequence. Some code uses it and some does not. This patch replaces (hopefully)
all remaining locations where an integer literal was used instead of this enum.
No functionality change intended.
Reviewers: nadav
CC: llvm-commits, t.p.northover
Differential Revision: http://llvm-reviews.chandlerc.com/D3108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204158 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than LegalizeAction::Expand, this needs LegalizeAction::Promote to get
promoted to fp_to_sint v8f32->v8i32. This is a legal operation on AVX.
For that to work properly, we also need to teach the legalizer about the
specific promotion required here. The default vector promotion uses
bitcasting to a vector type of the same total size. We want to promote the
vector element type, effectively widening the operation and then truncating
the result. This is analogous to the current logic of how int_to_fp is
promoted.
The change also factors out some code from the int_to_fp promotion code to
ValueType::widenIntegerVectorElementType. This is now shared between
int_to_fp and fp_to_int.
There is no longer need for the custom lowering of fp_to_sint f32->v8i16 in
X86. It can now go through the new target-independent fp_to_*int promotion
logic.
I also checked that no other target uses Promote for these ops yet, so there
shouldn't be any unexpected change in behavior.
Fixes <rdar://problem/16202247>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204058 91177308-0d34-0410-b5e6-96231b3b80d8
- Adds support for inserting vzerouppers before tail-calls.
This is enabled implicitly by having MachineInstr::copyImplicitOps preserve
regmask operands, which allows VZeroUpperInserter to see where tail-calls use
vector registers.
- Fixes a bug that caused the previous version of this optimization to miss some
vzeroupper insertion points in loops. (Loops-with-vector-code that followed
loops-without-vector-code were mistakenly overlooked by the previous version).
- New algorithm never revisits instructions.
Fixes <rdar://problem/16228798>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204021 91177308-0d34-0410-b5e6-96231b3b80d8
Utilize the previous move of MVT to a separate header for all trivial
cases (that don't need any further restructuring).
Reviewed By: Tim Northover
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204003 91177308-0d34-0410-b5e6-96231b3b80d8
This change brings getCallPreservedMask()'s logic in line with
getCalleeSavedRegs().
While this changes the control flow slightly, the change is not
currently observable. is64Bit must be false to get to the accidental
fallthrough, but the case that we fall into (coldcc) does nothing unless
is64Bit is true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203943 91177308-0d34-0410-b5e6-96231b3b80d8
Changing order of checks in getCallPreservedMask() to match
getCalleeSavedRegs() so that the logic is easier to compare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203939 91177308-0d34-0410-b5e6-96231b3b80d8
The current logic assumes that MF is not 0. Assert that it isn't, and
remove the default of 0 from the header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203934 91177308-0d34-0410-b5e6-96231b3b80d8
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203865 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the implementation of local directional labels to use a dedicated
map. With that it can then just use CreateTempSymbol, which is what the rest
of MC uses.
CreateTempSymbol doesn't do a great job at making sure the names are unique
(or being efficient when the names are not needed), but that should probably
be fixed in a followup patch.
This fixes pr18928.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203826 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
This is an update of D2973 which was reverted because of a bug reported
as PR19084.
Reviewers: t.p.northover, chapuni
Reviewed By: t.p.northover
CC: llvm-commits, alex, chapuni
Differential Revision: http://llvm-reviews.chandlerc.com/D3021
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203797 91177308-0d34-0410-b5e6-96231b3b80d8
Extend what's currently done for shift because the HW performs this masking
implicitly:
(rotl:i32 x, (and y, 31)) -> (rotl:i32 x, y)
I use the newly factored out multiclass that was only supporting shifts so
far.
For testing I extended my testcase for the new rotation idiom.
<rdar://problem/15295856>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203718 91177308-0d34-0410-b5e6-96231b3b80d8
The peephole (shift x, (and y, 31)) -> (shift x, y) is repeated for each
integer type and each shift variant.
To improve this a new multiclass is added that covers all integer types. The
shift patterns are now instantiated from this. I am planning to add new
instances for rotates as well.
No functional change intended:
* test/CodeGen/X86/shift-and.ll provides coverage
* Compared the expanded tablegen output and matched up the defs for these
Pat<>s before and after
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203685 91177308-0d34-0410-b5e6-96231b3b80d8
The function hasReliableSymbolDifference had exactly one use in the MachO
writer. It is also only true for X86_64. In fact, the comments refers to
"Darwin x86_64" and everything else, so this makes the code match the
comment.
If this is to be abstracted again, it should be a property of
TargetObjectWriter, like useAggressiveSymbolFolding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203605 91177308-0d34-0410-b5e6-96231b3b80d8
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203559 91177308-0d34-0410-b5e6-96231b3b80d8
When the MOVBE instructions are available, use them for 16-bit endian
swapping as well as for 32 and 64 bit.
The patterns were already present on the instructions, but weren't being
matched because the operation was unconditionally marked to 'Expand.'
Change that to be conditional on whether the MOVBE instructions are
available. Use 'rolw' to implement the in-register version (32 and 64
bit have the dedicated 'bswap' instruction for that).
Patch by Louis Gerbarg <lgg@apple.com>.
rdar://15479984
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203524 91177308-0d34-0410-b5e6-96231b3b80d8
the stack of the analysis group because they are all immutable passes.
This is made clear by Craig's recent work to use override
systematically -- we weren't overriding anything for 'finalizePass'
because there is no such thing.
This is kind of a lame restriction on the API -- we can no longer push
and pop things, we just set up the stack and run. However, I'm not
invested in building some better solution on top of the existing
(terrifying) immutable pass and legacy pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203437 91177308-0d34-0410-b5e6-96231b3b80d8
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
Patch by Manuel Jacob.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203230 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
llvm/MC/MCSectionMachO.h and llvm/Support/MachO.h both had the same
definitions for the section flags. Instead, grab the definitions out of
support.
No functionality change.
Reviewers: grosbach, Bigcheese, rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203211 91177308-0d34-0410-b5e6-96231b3b80d8
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203204 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary setup change to support a renaming of Windows target
triples. Split the object file format information out of the environment into a
separate entity. Unfortunately, file format was previously treated as an
environment with an unknown OS. This is most obvious in the ARM subtarget where
the handling for macho on an arbitrary platform switches to AAPCS rather than
APCS (as per Apple's needs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203160 91177308-0d34-0410-b5e6-96231b3b80d8
This is required to include MSVC's <atomic> header, which we do now in
LLVM.
Tests forthcoming in Clang, since that's where we test semantic inline
asm changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202865 91177308-0d34-0410-b5e6-96231b3b80d8
name might indicate, it is an iterator over the types in an instruction
in the IR.... You see where this is going.
Another step of modularizing the support library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202815 91177308-0d34-0410-b5e6-96231b3b80d8
We were dropping the displacement on the floor if we also had some
immediate offset.
Should fix PR19033.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202774 91177308-0d34-0410-b5e6-96231b3b80d8
X86Operand is extracted into individual header, because it allows to create an
arbitrary memory operand and append it to MCInst. It'll be reused in X86 inline
assembly instrumentation.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202496 91177308-0d34-0410-b5e6-96231b3b80d8
The current approach to lower a vsetult is to flip the sign bit of the
operands, swap the operands and then use a (signed) pcmpgt. psubus (unsigned
saturating subtract) can be used to emulate a vsetult more efficiently:
+ case ISD::SETULT: {
+ // If the comparison is against a constant we can turn this into a
+ // setule. With psubus, setule does not require a swap. This is
+ // beneficial because the constant in the register is no longer
+ // destructed as the destination so it can be hoisted out of a loop.
I also enable lowering via psubus in a few other cases where it's clearly
beneficial: setule and setuge if minu/maxu cannot be used.
rdar://problem/14338765
Patch by Adam Nemet <anemet@apple.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202301 91177308-0d34-0410-b5e6-96231b3b80d8
The patch defines new or refines existing generic scheduling classes to match
the behavior of the SSE instructions.
It also maps those scheduling classes on the related SSE instructions.
<rdar://problem/15607571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202065 91177308-0d34-0410-b5e6-96231b3b80d8
The lowering of the frame index for stackmaps and patchpoints requires some
target-specific magic and should therefore be handled in the target-specific
eliminateFrameIndex method.
This is related to <rdar://problem/16106219>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201904 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLoweringBase is implemented in CodeGen, so before this patch we had
a dependency fom Target to CodeGen. This would show up as a link failure of
llvm-stress when building with -DBUILD_SHARED_LIBS=ON.
This fixes pr18900.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201711 91177308-0d34-0410-b5e6-96231b3b80d8
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201700 91177308-0d34-0410-b5e6-96231b3b80d8
On x86, shifting a vector by a scalar is significantly cheaper than shifting a
vector by another fully general vector. Unfortunately, because SelectionDAG
operates on just one basic block at a time, the shufflevector instruction that
reveals whether the right-hand side of a shift *is* really a scalar is often
not visible to CodeGen when it's needed.
This adds another handler to CodeGenPrepare, to sink any useful shufflevector
instructions down to the basic block where they're used, predicated on a target
hook (since on other architectures, doing so will often just introduce extra
real work).
rdar://problem/16063505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201655 91177308-0d34-0410-b5e6-96231b3b80d8
The IR
@foo = private constant i32 42
is valid, but before this patch we would produce an invalid MachO from it. It
was invalid because it would use an L label in a section where the liker needs
the labels in order to atomize it.
One way of fixing it would be to just reject this IR in the backend, but that
would not be very front end friendly.
What this patch does is use an 'l' prefix in sections that we know the linker
requires symbols for atomizing them. This allows frontends to just use
private and not worry about which sections they go to or how the linker handles
them.
One small issue with this strategy is that now a symbol name depends on the
section, which is not available before codegen. This is not a problem in
practice. The reason is that it only happens with private linkage, which will
be ignored by the non codegen users (llvm-nm and llvm-ar).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201608 91177308-0d34-0410-b5e6-96231b3b80d8
A simple register copy on X86 is just 3 bytes, whereas movabsq is a 10 byte
instruction. Marking movabsq as not beeing cheap will allow LICM to move it
out of the loop and it also prevents unnecessary rematerializations if the
value is needed in more than one register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201377 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201333 91177308-0d34-0410-b5e6-96231b3b80d8
'OK_NonUniformConstValue' to identify operands which are constants but
not constant splats.
The cost model now allows returning 'OK_NonUniformConstValue'
for non splat operands that are instances of ConstantVector or
ConstantDataVector.
With this change, targets are now able to compute different costs
for instructions with non-uniform constant operands.
For example, On X86 the cost of a vector shift may vary depending on whether
the second operand is a uniform or non-uniform constant.
This patch applies the following changes:
- The cost model computation now takes into account non-uniform constants;
- The cost of vector shift instructions has been improved in
X86TargetTransformInfo analysis pass;
- BBVectorize, SLPVectorizer and LoopVectorize now know how to distinguish
between non-uniform and uniform constant operands.
Added a new test to verify that the output of opt
'-cost-model -analyze' is valid in the following configurations: SSE2,
SSE4.1, AVX, AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201272 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of expanding a packed shift into a sequence of scalar shifts,
the backend now tries (when possible) to convert the vector shift into a
vector multiply.
Before this change, a shift of a MVT::v8i16 vector by a
build_vector of constants was always scalarized into a long sequence of "vector
extracts + scalar shifts + vector insert".
With this change, if there is SSE2 support, we emit a single vector multiply.
This change also affects SSE4.1, AVX, AVX2 shifts:
- A shift of a MVT::v4i32 vector by a build_vector of non uniform constants
is now lowered when possible into a single SSE4.1 vector multiply.
- Packed v16i16 shift left by constant build_vector are now expanded when
possible into a single AVX2 vpmullw.
This change also improves the lowering of AVX512f vector shifts.
Added test CodeGen/X86/vec_shift6.ll with some code examples that are affected
by this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for targets with mature MC support. Such targets will always parse the inline assembly (even when emitting assembly). Targets without mature MC support continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler to parse inline assembly (even when emitting assembly output). UseIntegratedAs is set to true for targets that consider any failure to parse valid assembly to be a bug. Target specific subclasses generally enable the integrated assembler in their constructor. The default value can be overridden with -no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example, those that use mnemonics such as 'foo' or 'hello world') have been updated to disable the integrated assembler.
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201237 91177308-0d34-0410-b5e6-96231b3b80d8
