Thomas Harte
885fae1534
Stubs in a speed register.
2020-10-28 21:23:45 -04:00
Thomas Harte
1e4679ae14
Corrects JSL
and RTL
.
2020-10-28 17:25:40 -04:00
Thomas Harte
267dd59a59
Gets as far as seemingly yet another memory-map setting.
...
Tomorrow, maybe?
2020-10-27 22:31:58 -04:00
Thomas Harte
0a91ac5af5
Adds some extra notes, starts getting into trying to run the IIgs.
2020-10-27 22:09:45 -04:00
Thomas Harte
ad93ad6018
Attempts to finish off shadowing.
2020-10-27 22:05:04 -04:00
Thomas Harte
0c700094ea
Goes branchless on shadowing.
2020-10-27 21:56:03 -04:00
Thomas Harte
20631a157b
Contorts somewhat in pursuit of branchless shadowing regardless of page and without extra storage.
2020-10-27 21:37:39 -04:00
Thomas Harte
e44f95a882
Takes a first, faltering shot at shadowing.
2020-10-27 19:49:47 -04:00
Thomas Harte
31cd45f8b5
Takes a run at set_card_paging and simplifies method of shadowing.
2020-10-27 19:33:47 -04:00
Thomas Harte
74f9f6ad3b
Tests and corrects ROM access beyond bank $00.
2020-10-27 19:02:15 -04:00
Thomas Harte
1dfdb51e61
Hits a few other easy cases.
...
Still to do: card paging, and finding out which banks that applies to, and shadowing. So: everything with flags.
2020-10-26 21:49:47 -04:00
Thomas Harte
18832dc19d
Attempts to expand the language card stuff to all affected pages.
2020-10-26 20:30:41 -04:00
Thomas Harte
3dee0666cb
Corrects current bank $00 language card behaviour.
2020-10-26 17:46:40 -04:00
Thomas Harte
f830f6a57a
Adds failing test of initial ROM mirroring.
...
It's the end of the evening, so this is it for today.
2020-10-25 22:13:54 -04:00
Thomas Harte
82c733c68c
Adds some very basic actual tests.
2020-10-25 21:40:50 -04:00
Thomas Harte
ed510409c4
Starts memory map test class, already finding a typo.
2020-10-25 21:31:21 -04:00
Thomas Harte
7614eba4bf
Factors out the IIgs memory map logic.
...
As testing would be rational.
2020-10-25 21:10:04 -04:00
Thomas Harte
13c8032465
ROM isn't writeable. The clue is in the name.
2020-10-25 18:29:17 -04:00
Thomas Harte
44fc08cd5b
Switches to a mapping system that supports non-continuous regions, and is smaller.
2020-10-25 18:28:32 -04:00
Thomas Harte
7631b11c55
Corrects double low-res colour serialisation.
2020-10-24 19:26:32 -04:00
Thomas Harte
726b5f62bb
Corrects read/write access to auxiliary soft switches.
2020-10-24 19:00:03 -04:00
Thomas Harte
ddd84db510
Edges towards a functioning IIgs memory map.
...
Next up: making sure language and auxiliary switches apply. That should get something from the ROM.
2020-10-23 19:41:10 -04:00
Thomas Harte
966241b4cc
Adds documentation, ensures the language card signals less noisily.
2020-10-23 18:44:47 -04:00
Thomas Harte
9371a8993f
Factors out auxiliary memory switches and related decisions.
2020-10-22 22:33:31 -04:00
Thomas Harte
410c99de54
Factors out the language card memory selection logic.
2020-10-22 21:01:12 -04:00
Thomas Harte
817f93a490
Edges towards a working memory subsystem. At least structurally.
2020-10-22 19:25:04 -04:00
Thomas Harte
43611792ac
Adds just enough to get a 65816 ticking over.
2020-10-21 21:19:18 -04:00
Thomas Harte
62231708d7
read_pages_
can be const
.
2020-10-21 21:17:15 -04:00
Thomas Harte
5287c57ee0
Adds the IIgs as a user-selectable machine.
...
Albeit that there is no underlying machine yet.
2020-10-20 22:18:11 -04:00
Thomas Harte
1fa94e1b08
Adds the 65816 as an in-code option for Oric emulation.
...
This also means it'll be exposed via the SDL build, but that's okay.
2020-10-18 21:43:08 -04:00
Thomas Harte
5dcf720bb5
Extends list of BusOperations.
...
Now to retest, widely.
2020-10-15 21:35:01 -04:00
Thomas Harte
ef1a514785
Introduces 6502Selector, for picking either a 6502 or a 65816 based on a single template parameter.
2020-09-28 21:35:46 -04:00
Thomas Harte
5651ef606d
Resolves failure to advance video address when output is blocked.
2020-09-15 22:20:06 -04:00
Thomas Harte
e113780fd1
Minor: ensures no possibility of a dangling(-ish) pointer within the Mac video.
2020-09-10 22:13:19 -04:00
Thomas Harte
e32ae6c191
Adds UGLY HACKs to workaround uncovered issues in the OpenGL scan target.
2020-09-10 22:10:24 -04:00
Thomas Harte
3597f687de
Continues sidling towards composite & S-Video handling.
2020-08-19 21:20:06 -04:00
Thomas Harte
5c836604c0
Reenable MaserSystem code.
...
Accidental/poor branch management is evidenced here.
2020-08-04 21:50:54 -04:00
Thomas Harte
e235a45abb
Breaks all output.
...
... by switching out NSOpenGLView for MKLView with no drawing infrastructure yet in place.
2020-08-04 18:22:14 -04:00
Thomas Harte
9410594486
Merge branch 'master' into LockFreeQueue
2020-07-29 21:22:19 -04:00
Thomas Harte
82d6a5387f
Gives Qt disk controllers independent ROM/RAM selection logic.
...
In particular, this fixes the Microdisc.
2020-07-29 21:06:41 -04:00
Thomas Harte
1942742d73
Resolves thread data race on Macintosh audio output.
2020-07-28 22:21:52 -04:00
Thomas Harte
cbb0594e6b
Use 16-sector state machine even with the 13-sector boot ROM.
...
I think I've proven that the Disk II doesn't decode the 13-sector state machine correctly. Work to do there.
2020-07-16 23:27:27 -04:00
Thomas Harte
e1c57b6fbe
Further ensures both ZX80 and ZX81 functionality.
2020-07-14 23:45:51 -04:00
Thomas Harte
371c26251c
Switches strategy for the ZX80.
2020-07-14 22:36:04 -04:00
Thomas Harte
645d198bee
Causes ZX80 and ZX81 software that doesn't already autorun to do so.
2020-07-14 22:17:56 -04:00
Thomas Harte
478d081095
Ensures machines take user-friendly default settings.
2020-06-23 23:27:56 -04:00
Thomas Harte
7af8646470
Allowing for the constexpr, this is maybe_unused.
2020-06-19 23:47:43 -04:00
Thomas Harte
2477752fa4
Adds further [[fallthrough]]
attributes.
2020-06-19 23:36:51 -04:00
Thomas Harte
59458f6444
Resolves errant spaces.
2020-06-16 23:15:38 -04:00
Thomas Harte
495024d6fe
Cleans up all redundant lock/unique_guard declarations.
2020-06-15 00:24:10 -04:00
Thomas Harte
f215405beb
Corrects capitalisation errors.
2020-06-02 23:27:29 -04:00
Thomas Harte
73131735fa
Further qmake warning corrections.
2020-05-30 19:31:17 -04:00
Thomas Harte
48afc54af6
Cuts down unused parameter warnings to just a few that may well indicate implementation errors.
2020-05-30 01:06:43 -04:00
Thomas Harte
267006782f
Starts to add Qt target; resolves many build warnings.
2020-05-30 00:37:06 -04:00
Thomas Harte
512a52e88d
Increases const correctness, marks some additional constructors as constexpr, switches std::atomic construction style.
2020-05-20 23:34:26 -04:00
Thomas Harte
66c2eb0414
Further tightens const
and constexpr
usage.
2020-05-12 22:22:21 -04:00
Thomas Harte
8596a9826f
Whether the BIOS is available in hardware is now decided entirely based on whether it is on disk.
2020-05-12 00:11:46 -04:00
Thomas Harte
81d70ee325
Adds in a few further const
s.
2020-05-09 23:49:37 -04:00
Thomas Harte
05c3f2a30d
Adds some further `costs.
2020-05-09 23:03:33 -04:00
Thomas Harte
25996ce180
Further doubles down on construction syntax for type conversions.
2020-05-09 23:00:39 -04:00
Thomas Harte
4136428db3
Removes dead StandardOptions.cpp.
2020-05-09 21:35:15 -04:00
Thomas Harte
31c6faf3c8
Adds a bunch of const
s.
2020-05-09 21:23:52 -04:00
Thomas Harte
40b60fe5d4
Renames folder as per intended scope.
2020-05-09 18:04:11 -04:00
Thomas Harte
eed357abb4
Introduces concept of 'average peak volume' in order better to normalise audio sources like the OPLL.
2020-05-09 17:57:21 -04:00
Thomas Harte
386a7ca442
Continues doing away with the attempt heavily to interleave the OPLL and OPL2, creating a new OPLL class.
2020-05-04 21:14:51 -04:00
Thomas Harte
1f34214fb3
Imagines a future of being able to boot into the BIOS.
2020-04-29 22:07:20 -04:00
Thomas Harte
6ebc93c995
Switches to maximum-rate multiplexing. Hopefully to eliminate the mixer as a consideration for now.
2020-04-24 23:50:06 -04:00
Thomas Harte
0ac99e8d42
Disables low low-pass filter, honours audio control bits for better volume usage.
2020-04-21 19:57:13 -04:00
Thomas Harte
6568c29c54
Improves commentary.
2020-04-19 22:42:25 -04:00
Thomas Harte
559a2d81c1
Baby step: starts trying to output the raw FM carrier, no modulation, no ADSR.
2020-04-12 12:46:40 -04:00
Thomas Harte
dd6769bfbc
Splits OPLL and OPL2 classes.
...
Logic is: they have different mixers (additive in the OPL2, time-division multiplexing in the OPLL) as well as different register sets. So I'll put operator and channel logic directly into those structs.
2020-04-07 23:15:26 -04:00
Thomas Harte
b0abc4f7bb
Implements enough wiring that the Master System will instantiate and talk to an OPLL.
2020-04-03 20:05:36 -04:00
Thomas Harte
fe3942c5b3
Updates comments.
2020-04-01 23:49:07 -04:00
Thomas Harte
f417fa82a4
Splits 'CRTMachine' into three parts: ScanProducer, AudioProducer, TimedMachine.
...
Simultaneously cleans up some of the naming conventions and tries to make things a bit more template-compatible.
2020-04-01 23:19:34 -04:00
Thomas Harte
7a12a0149a
Ensures BIOS is really not paged if not loaded.
2020-03-23 20:00:31 -04:00
Thomas Harte
69277bbb27
Renames files to match project convention.
2020-03-19 23:24:06 -04:00
Thomas Harte
7ab7efdbc1
Ensures consistent ordering.
2020-03-19 19:41:50 -04:00
Thomas Harte
b8ebdc012f
Ensure normative construction declaration ordering.
2020-03-19 18:58:36 -04:00
Thomas Harte
c6f35c9aac
Rejigs help output.
2020-03-18 23:11:25 -04:00
Thomas Harte
311458f41f
Restores Macintosh 'runtime' options.
...
Also cleans up some leftover parts elsewhere.
2020-03-18 21:50:02 -04:00
Thomas Harte
b2a381d401
Restores Vic-20 runtime options.
2020-03-18 20:23:55 -04:00
Thomas Harte
ffc1b0ff29
Reintroduces Oric runtime options.
2020-03-18 18:31:31 -04:00
Thomas Harte
ead2823322
Reintroduces MSX and Master System runtime options.
2020-03-18 18:26:22 -04:00
Thomas Harte
a7e1920597
Restores ColecoVision runtime options.
2020-03-18 00:06:52 -04:00
Thomas Harte
ec6664f590
Takes steps to guarantee property naming; reintroduces Electron runtime options.
2020-03-17 23:52:55 -04:00
Thomas Harte
8c6ca89da2
Restores runtime options for the Acorn Electron.
2020-03-17 22:06:20 -04:00
Thomas Harte
b6e81242e7
Reintroduces Apple II runtime options.
2020-03-17 21:53:26 -04:00
Thomas Harte
f9ca443667
Adds the ability for reflective structs to limit the permitted values to enumerated properties.
2020-03-17 21:44:04 -04:00
Thomas Harte
394ee61c78
Starts a switch to reflectable-style runtime options.
...
The Amstrad CPC and ZX80/81 have made the jump so far, subject to caveats. The macOS build is unlikely currently to work properly.
2020-03-16 23:25:05 -04:00
Thomas Harte
8e3bf0dbca
Starts moving towards a Deflectable-based system of runtime options.
2020-03-15 23:48:53 -04:00
Thomas Harte
2031a33edf
Technically SDL users can now start a new machine.
...
Missing though: all the old per-machine command-line options, and any control over the new one.
2020-03-15 21:50:43 -04:00
Thomas Harte
fc3d3c76f8
Edges further towards providing enough information for dynamic user-provided machine creation.
2020-03-15 12:54:55 -04:00
Thomas Harte
880bed04f5
Adds AllMachines
, rounds out ConstructionOptionsByMachineName.
2020-03-15 00:15:19 -04:00
Thomas Harte
1a2872c815
Starts to build an easy set
interface.
2020-03-13 22:42:37 -04:00
Thomas Harte
52f644c4f1
Ensures that reflection is completely blind; starts adding SDL instantiation logic.
2020-03-12 20:56:02 -04:00
Thomas Harte
0502e6be67
Starts working towards a registration-based model of reflective enums.
2020-03-10 22:32:55 -04:00
Thomas Harte
a560601338
Corrects virtual F keys.
...
They're FUNC+, not SHIFT+.
2020-03-06 21:56:08 -05:00
Thomas Harte
58b8dfb929
Attempts to improve SDL key merging.
2020-03-05 21:56:26 -05:00
Thomas Harte
462a76dd96
Adds virtual keys for F1, F2, etc.
2020-03-05 21:01:30 -05:00
Thomas Harte
a0311858f9
Adds mappings for curly brackets.
2020-03-03 23:04:10 -05:00
Thomas Harte
f08d500fd6
Attempts to factor out the latest keyboard logic and hook it in from SDL also.
2020-03-03 22:58:15 -05:00
Thomas Harte
0ef953a1ea
Adjusts EDIT for the ZX80.
2020-03-02 23:36:38 -05:00
Thomas Harte
9225c4ef70
Lowers audio frequency cut-off. Still doing this by ear.
2020-03-02 23:11:09 -05:00
Thomas Harte
32136b75cd
Modifies mappings to improve key repeat on backspace and potentially allow mapping of other keys.
2020-03-02 23:10:18 -05:00
Thomas Harte
1f41d9c5f5
Further improvement: if in physical mode, but pressing an unrecognised key, attempt to 'type' it.
2020-03-02 22:08:54 -05:00
Thomas Harte
dc47a2b7d7
Adds virtual key for EDIT.
2020-03-02 21:44:15 -05:00
Thomas Harte
b2c07b3110
The Atari ST doesn't offer quick loading.
2020-03-01 22:10:41 -05:00
Thomas Harte
90e6bef6d7
Adds virtual keys for F2, F4, F6 and F8.
2020-03-01 21:47:28 -05:00
Thomas Harte
535634daca
Introduces virtual left and up keys for the Vic-20.
...
Thereby allowing all cursor keys to be mapped.
2020-03-01 21:42:30 -05:00
Thomas Harte
ed18092088
Extends logic for when to fall back on standard keypress logic even in logical mode.
2020-03-01 20:25:12 -05:00
Thomas Harte
611182910a
Slightly rejigs character mapper ownership.
2020-03-01 18:44:26 -05:00
Thomas Harte
9273e9b6ed
Adds a second virtual key, for break.
2020-02-29 23:11:02 -05:00
Thomas Harte
0705a99ea0
Adds a virtual delete key to the ZX80 and ZX81.
2020-02-29 22:51:42 -05:00
Thomas Harte
86a09b5e7d
Slightly improves ZX80 and ZX81 typing speed.
2020-02-29 22:31:45 -05:00
Thomas Harte
b33f568fdd
Makes basic typing adaptations.
2020-02-29 19:59:51 -05:00
Thomas Harte
6e4bd4f505
Ensures new text is appended to any existing buffer.
...
TODO: move this into add_typer?
2020-02-29 19:58:56 -05:00
Thomas Harte
b971e2a42c
Adds get_is_resetting to the Z80, eliminating the CPC's custom version.
2020-02-29 19:58:25 -05:00
Thomas Harte
3c103506c9
Optimises Electron typer speed.
2020-02-29 19:26:15 -05:00
Thomas Harte
41d2062342
Ensures that sequences of the same character are broken up properly.
2020-02-29 19:22:54 -05:00
Thomas Harte
672c59f970
Adds use of append
with typer.
2020-02-29 18:52:47 -05:00
Thomas Harte
99229df017
Slightly improves syntax.
2020-02-29 18:52:12 -05:00
Thomas Harte
346d80e30b
Corrects phase counting for machines that pause after clear. Which is all of them by default.
2020-02-29 18:51:55 -05:00
Thomas Harte
54b3e511e9
Extends mapping slightly for potential duplicate delete and return.
2020-02-29 18:40:41 -05:00
Thomas Harte
f25683ebec
Fixes off-by-one range test.
2020-02-29 18:35:13 -05:00
Thomas Harte
8a5c4e384a
Minimises typer timing.
2020-02-29 18:13:05 -05:00
Thomas Harte
4594a3c02b
Ensures final thing in a key sequence is fully typed; adds ability to quicken input.
2020-02-29 18:12:32 -05:00
Thomas Harte
bd45c1c963
Adds append
and generally seeks to improve string accumulation.
2020-02-29 17:34:21 -05:00
Thomas Harte
2370575eb5
Starts introducing the Patrik Rak tests.
2020-02-22 15:49:36 -05:00
Thomas Harte
fa933952f7
Throws in additional asserts, so far without uncovering anything.
2020-02-19 23:14:18 -05:00
Thomas Harte
f43c31da1f
Tries a new arrangement of hsync response.
2020-02-17 22:24:01 -05:00
Thomas Harte
2e1b245cd8
Merge pull request #758 from TomHarte/JasminDriveSelection
...
Switches Jasmin drive selection logic.
2020-02-16 21:21:41 -05:00
Thomas Harte
4153442703
Switches Jasmin drive selection logic.
2020-02-16 21:15:16 -05:00
Thomas Harte
5e4b721e97
Updates Byte Drive implementation as per latest information.
2020-02-16 21:07:03 -05:00
Thomas Harte
50d356be2f
Ensures all audio sources, including compound sources, announce whether they're stereo correctly.
2020-02-16 18:31:45 -05:00
Thomas Harte
9835e800ec
Fixed: individual audio generators now either are or are not stereo. The speaker acts accordingly.
2020-02-16 18:28:03 -05:00
Thomas Harte
808e4e8537
Adds comment to explain channel allocations.
2020-02-16 15:04:52 -05:00
Thomas Harte
e66a3523b6
Makes some attempt at stereo support, with the Amstrad CPC being the test case.
2020-02-15 18:55:19 -05:00
Thomas Harte
e02d109864
Nudges the LowpassSpeaker towards supporting stereo generation.
2020-02-15 18:03:12 -05:00
Thomas Harte
9ca2d8f9f2
Tried to be less lazy with lambda captures.
...
This is primarily defensive.
2020-02-14 23:39:08 -05:00
Thomas Harte
3df99788ff
Removes TODOs, as I think they're probably inappropriate.
2020-02-13 21:19:23 -05:00
Thomas Harte
3600d2d193
Starts switching towards a byte-oriented bus.
2020-02-13 21:14:13 -05:00
Thomas Harte
e01c66fd65
Implements multidrive support.
2020-02-12 23:32:01 -05:00
Thomas Harte
9f32fa7f5b
Resolves potential random RAM writes at startup.
2020-02-12 23:31:48 -05:00
Thomas Harte
91a3d42919
Ensures no DMA clocking whatsoever when asleep.
2020-02-12 23:23:42 -05:00
Thomas Harte
452e281009
Ensures what is currently the only drive is selected.
2020-02-11 22:13:13 -05:00
Thomas Harte
05bcd73f82
Attempts to pull drive ownership into DiskController.
...
For the sake of being more intelligent as to drive clocking, hopefully. And, eventually, to support multiple drive selection.
2020-02-11 21:59:13 -05:00
Thomas Harte
6624cb7a78
Corrects set_ram macro to act more like a function.
2020-02-10 23:19:47 -05:00
Thomas Harte
85dcdbfe9e
Adopts a log prefix for the Master System.
2020-02-09 19:12:44 -05:00
Thomas Harte
24340d1d4f
Resolves fetch errors.
2020-02-09 17:04:49 -05:00
Thomas Harte
085529ed72
Makes the shifter behaviour conform to its documentation.
2020-02-02 17:26:39 -05:00
Thomas Harte
ff39f71ca0
Eliminates meaningless constants from the Macintosh video's CRT setup.
2020-01-30 23:29:04 -05:00
Thomas Harte
019474300d
Centralises responsibility for picking irrelevant numbers for a computer-style monitor.
2020-01-30 23:26:02 -05:00
Thomas Harte
af976b8b3d
Eliminates modulus operation per ROM access.
2020-01-30 23:09:24 -05:00
Thomas Harte
f3db1a0c60
Eliminates ad hoc scheduling for delayed DE -> LOAD.
2020-01-29 22:50:22 -05:00
Thomas Harte
ce28213a5e
[Mostly] unifies deferral process.
2020-01-29 22:46:08 -05:00
Thomas Harte
f9ce50d2bb
Adds some debugging `asserts.
2020-01-29 22:45:44 -05:00
Thomas Harte
f0a6e0f3d5
Splits out the queue management stuff from queue+action.
...
Temporarily breaks ST video in the endeavour.
2020-01-29 22:18:41 -05:00
Thomas Harte
0e29c6b0ab
On further reflection, I think events should occur after the running period.
...
I'm testing this now for sanity in 2/4bpp mode.
2020-01-28 23:26:37 -05:00
Thomas Harte
c5edc879b6
Switches back to testing the monochrome monitor.
2020-01-28 22:12:57 -05:00
Thomas Harte
65309e60c4
Corrects sequence point generation by allowing for hsync_end != end of line.
2020-01-28 20:38:20 -05:00
Thomas Harte
2c0cab9e4d
Adds line length latching as a line event.
2020-01-28 20:22:37 -05:00
Thomas Harte
b1ff031b54
Fixes runtime test.
2020-01-27 23:41:08 -05:00
Thomas Harte
7e8405e68a
Makes 72Hz horizontal sync independently relocatable.
...
... and moves and shortens it, based on my guesswork as to requirements.
2020-01-27 23:40:01 -05:00
Thomas Harte
c8fd00217d
Resolves loss of horizontal resolution in 1bpp mode.
2020-01-27 23:08:28 -05:00
Thomas Harte
9d340599a6
Towards ST 1bpp support: puts vsync in an appropriate location, starts experimenting with proper CRT timings.
2020-01-27 23:00:30 -05:00
Thomas Harte
7316a3aa88
Merge branch 'master' into FinalOverride
2020-01-26 23:42:25 -05:00
Thomas Harte
b514756272
Adds the option to run machines at a multiple of their real speeds.
...
Exposed to SDL users only, for now.
2020-01-26 13:25:23 -05:00
Thomas Harte
79bb0f8222
Updates comment.
2020-01-26 11:36:06 -05:00
Thomas Harte
43bf6aca67
Corrects reported scan status for the Amstrad CPC.
2020-01-25 23:46:18 -05:00
Thomas Harte
03d23aad41
Corrects reported ZX80/81 scan status.
2020-01-25 23:27:09 -05:00
Thomas Harte
294e09f275
All these 'override's can be 'final's.
...
At least for the purpose of being communicative. I doubt there's much to gain in terms of compiler output — the DiskImageHolder can avoid some virtual lookups but nothing else leaps out.
2020-01-23 22:57:51 -05:00
Thomas Harte
ba516387ba
In all these instances, final => override. So no need to repeat myself.
2020-01-23 22:35:39 -05:00
Thomas Harte
9136917f00
Enables the Oric for 50/60Hz mode switching, inventing PAL60 for the purpose.
2020-01-23 22:14:02 -05:00
Thomas Harte
6802318784
Removes audio_queue_.flush() calls; I don't think I really need to block. At least, not usually.
2020-01-23 20:13:16 -05:00
Thomas Harte
428d141bc9
Factors out the logic behind the Atari 2600's frequency switching.
2020-01-23 20:12:44 -05:00
Thomas Harte
a86fb33789
Ensures that the ColecoVision, MSX and Master System fully flush.
2020-01-22 22:57:16 -05:00
Thomas Harte
beefb70f75
Adds vertical sync as something that can be run_until.
2020-01-22 22:20:56 -05:00
Thomas Harte
8404409c0d
Causes the Atari 2600 to obey normal flush semantics.
...
This stuff is going to become more important with run_until.
2020-01-22 22:05:51 -05:00
Thomas Harte
a71c5946f0
Ensures proper manipulation of scan_statuses, leading to the correct result out of a CRTMachine.
...
Possibly with the exception of the TMS, as I appear to have uncovered an unrelated issue there.
2020-01-21 22:28:25 -05:00
Thomas Harte
d97a073d1b
Adds the necessary routine for all machines to be able to respond to get_scan_status.
...
They all just as the CRT, as all are currently based on the CRT. Which doesn't currently know the total clock rate it would need to in order properly to scale the answer to the question. Further thought coming.
2020-01-20 21:45:10 -05:00
Thomas Harte
3c760e585a
Switches to accepting a bit mask of events to run_until.
2020-01-20 16:08:21 -05:00
Thomas Harte
cb61e84868
Starts building out higher-level run_until
functionality.
...
Specifically: you can now run until the next set of speaker samples has been delivered.
2020-01-20 12:12:23 -05:00
Thomas Harte
8349005c4b
Adds CRTMachine::run_until, which will run until a condition is true.
...
I want to get to being able to say "run until the beam is 60% of the way down", "run until a new packet of audio has been delivered", etc.
2020-01-19 23:52:47 -05:00
Thomas Harte
d30f83871d
Corrects Jasmin activity light.
2020-01-16 22:59:43 -05:00
Thomas Harte
efd684dc56
Opts the BD-500 in for modified Shugart RDY.
...
Hopefully this is correct. I'm presently mystified as to other options.
2020-01-16 21:34:57 -05:00
Thomas Harte
1972ca00a4
Fixes quick-NTSC-avoidance fix.
...
I suspect this is very temporary, but here it is.
2020-01-16 00:01:16 -05:00
Thomas Harte
c606931c93
Ensures a safe default-selected drive.
2020-01-15 23:56:44 -05:00
Thomas Harte
93cecf0882
Ensures no possible initial NTSC, removes printfs.
2020-01-15 23:47:45 -05:00
Thomas Harte
aac3d27c10
Adds activity indicators for the BD-500 and Jasmin.
...
Also slightly cleans up DiskController a little further.
2020-01-15 23:39:15 -05:00
Thomas Harte
91fae86e73
Factors out paging, implements a bit more of the BD500.
...
That is, enough seemingly fully to work, if I force the drive to report ready.
2020-01-15 23:15:39 -05:00
Thomas Harte
f5c194386c
Ties head load to ready.
...
BD-DOS no longer perpetually retries.
2020-01-14 23:45:36 -05:00
Thomas Harte
62c3720c97
Adds status register and shout-outs on other address access.
2020-01-14 23:24:11 -05:00
Thomas Harte
f258fc2971
Adds enough of a BD500 for the boot sector seemingly to load.
2020-01-14 23:15:27 -05:00
Thomas Harte
6b84ae3095
Makes the Microdisc also a DiskController, and simplifies delegate interface.
2020-01-14 22:53:27 -05:00
Thomas Harte
5dd8c677f1
Factors out from the Jasmin the stuff that I'm going to need to repeat for the BD-500.
2020-01-14 22:23:00 -05:00
Thomas Harte
3ced31043a
Makes Jasmin autoboot optional, adds a Jasmin reset key, adds the Jasmin to File -> New... .
...
Also finally implements KeyNMI.
2020-01-05 21:57:33 -05:00
Thomas Harte
7361e7ec34
Fixed: the issue was failing to propagate motor control.
...
Also it seems to be incorrect to have the Jasmin paged at initial boot.
2020-01-05 21:35:20 -05:00
Thomas Harte
533729638c
It seems like Jasmin paged in at boot, and button = page back in and reset works?
...
At least, that gets me a 'boot failed' error. Which is something.
2020-01-05 20:34:15 -05:00
Thomas Harte
9f30be1c13
Attempts to implement most of a Jasmin disk interface.
...
With one obvious omission: there's no way to start it? The real interface had a dedicated button, but I don't yet know what that button did. Research needed.
2020-01-05 20:05:55 -05:00
Thomas Harte
c1bae49a92
Standardises on read
and write
for bus accesses.
...
Logic being: name these things for the bus action they model, not the effect they have.
2020-01-05 13:40:02 -05:00
Thomas Harte
e4349f5e05
Slightly clarifies logic.
2020-01-04 21:32:34 -05:00
Thomas Harte
7b2777ac08
Sorts cases into order; adds copious audio mirrors.
2020-01-04 21:06:21 -05:00
Thomas Harte
0fbcbfc61b
Switches to more idiomatic address listing.
2020-01-04 20:35:47 -05:00
Thomas Harte
3ab4fb8c79
Enables an assumption of partial address decoding at the ACIA and PSG.
2020-01-04 17:27:55 -05:00
Thomas Harte
19ddfae6d6
Adds Joystick key code mode, ensures events aren't posted in interrogation mode.
...
This should fix Turrican due to the latter change; I'm not aware of software that uses the former.
2020-01-04 09:45:59 -05:00
Thomas Harte
414b0cc234
Reintroduces sync write delay.
2020-01-02 23:36:11 -05:00
Thomas Harte
134e828336
Updates note to self.
2020-01-02 23:33:35 -05:00
Thomas Harte
455e831b87
Corrects bug whereby changing pixel mode mid-line will produce an improper amount of data.
2020-01-02 23:18:21 -05:00
Thomas Harte
42ccf48966
Judging by Pompey Pirates Menu 88, vsync should occur a line earlier, ending during line 0.
2020-01-02 20:16:28 -05:00
Thomas Harte
2f8078db22
Switches to should_log as a global when I'm hacking about.
2020-01-02 20:15:48 -05:00
Thomas Harte
23ed9ad2de
Corrects application of negative relative scale.
2020-01-01 13:22:21 -05:00
Thomas Harte
017681a97c
Now honours permitted mouse range.
2020-01-01 12:48:38 -05:00
Thomas Harte
90b899c00e
Attempts to implement absolute mouse positioning mode.
...
Along with mouse direction.
2020-01-01 12:29:33 -05:00
Thomas Harte
c11fe25537
Merge branch 'master' into EnchantedWoods
2019-12-30 23:32:45 -05:00
Thomas Harte
0a12893d63
Shunts vsync back down to top of frame.
...
It's guess after guess, basically.
2019-12-30 23:01:31 -05:00
Thomas Harte
8e777c299f
Switches to latching video interrupts until acknowledged.
...
Seems to fix Cisco Heat, at least. I have no idea whether I'm latching the correct thing, whether IACK should clear both or only one, etc.
2019-12-30 23:00:55 -05:00
Thomas Harte
e23d1a2958
Restores vsync active.
2019-12-29 22:03:36 -05:00
Thomas Harte
6449403f6a
Corrects pending_events_ test for sequence points.
...
Simplifies around as possible.
2019-12-29 21:53:45 -05:00
Thomas Harte
c8fe66092b
Attempts to correct insertion logic (and mostly bypasses it).
2019-12-29 21:42:41 -05:00
Thomas Harte
b33218c61e
Fixes reload test, which really needs to sense the CRT-headed vsync output.
...
i.e. not the one heading back to the CPU.
2019-12-29 20:55:34 -05:00
Thomas Harte
8ce26e7182
Adds a delay on vsync visibility (i.e. as to generating an interrupt).
2019-12-29 19:03:08 -05:00
Thomas Harte
47068ee081
Ensures visible hsync end generates a sequence point.
2019-12-29 17:51:50 -05:00
Thomas Harte
214b6a254a
Adds a delay on visibility of the hsync signal, and a test on address reload.
2019-12-29 17:37:09 -05:00
Thomas Harte
93f6964d8a
Introduces some preliminary line length unit tests.
...
Thereby fixes one potential issue with load_ toggling.
2019-12-28 22:50:34 -05:00
Thomas Harte
13f11e071a
Simplifies border colour change propagation.
...
I'm not sure it was even technically correct as was.
2019-12-28 10:45:10 -05:00
Thomas Harte
f7825dd2a2
Pulls out address reload position as a separate constant.
2019-12-28 10:36:50 -05:00
Thomas Harte
a9d1f5d925
Pulls out address reload as something I can position independently.
...
Sadly receding it by 3 did not have the effect I was hoping for, of receding Enchanted Land's first register tweaking.
2019-12-27 23:47:19 -05:00
Thomas Harte
2757e5d600
Removes untrue comment.
2019-12-27 22:51:11 -05:00
Thomas Harte
5026de9653
Rejigs the video stream to ensure shifter really is continuous.
...
... and definitively to avoid potential buffer overruns. Or, at least, to have a mechanism in place definitively to avoid them. Which will be tested and debugged as necessary.
Also simplifies the colour burst and border/pixels selection logic.
2019-12-27 22:47:34 -05:00
Thomas Harte
5fa8e046d8
It's inaccurrate to call this _the_ shifter. So don't.
2019-12-27 19:03:10 -05:00
Thomas Harte
de43e86310
Permits Vic-20 memory to be specified in banks; adds recognition of TheC64-style file tags to specify them.
2019-12-26 22:49:48 -05:00
Thomas Harte
a9a92de954
Adds a bunch of shout-outs for unimplemented behaviour.
2019-12-25 15:32:33 -05:00
Thomas Harte
a8ba3607b7
Adds (and disables) a minor additional piece of logging.
2019-12-24 21:43:39 -05:00
Thomas Harte
5068328a15
Fixes debugging output.
2019-12-24 19:15:58 -05:00
Thomas Harte
b2bed82da6
Switches to standard logging.
2019-12-23 22:00:40 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
5456a4a39d
Eliminates static
where constexpr
a aren't class members; adds some if constexpr
s for clarity.
2019-12-22 13:42:24 -05:00
Thomas Harte
274867579b
Deploys constexpr
as a stricter const
.
2019-12-22 00:22:17 -05:00
Thomas Harte
05d77d3297
Also deploys make_unique/shared to avoid type repetition.
2019-12-21 23:52:04 -05:00
Thomas Harte
e5440a4146
Hacks in a colour burst.
...
With a major flaw: it's implicit. I think I need a minor rethink of various components here.
2019-12-20 23:49:38 -05:00
Thomas Harte
47508d50a7
Wires through a composite video option for the ST.
...
Which is great and all, except that I've not yet inserted a colour burst. So it's monochrome.
2019-12-20 20:49:14 -05:00
Thomas Harte
3d83f5ab49
Ensures a proper size
handoff and implements a ripple feature I happened to find a forum post about.
2019-12-19 22:58:07 -05:00
Thomas Harte
0007dc23b3
Eliminates bit 0 of the DMA address.
2019-12-19 22:44:21 -05:00
Thomas Harte
ed7f171736
Moves address reload to end of vertical sync.
...
I have no information as to when it should be, so this is as valid a guess as any other.
2019-12-19 22:20:43 -05:00
Thomas Harte
0e066f0f70
Removes 'done' TODO.
...
For certain values of done.
2019-12-19 22:19:59 -05:00
Thomas Harte
d85ae21b2f
Adds an explicit declaration of chip type to all AY users.
2019-12-18 19:28:41 -05:00
Thomas Harte
c00ae7ce6a
Adds a one-cycle delay on frequency changes.
2019-12-13 19:57:54 -05:00
Thomas Harte
4bcf217324
Ensures delayed loading isn't interrupted by blank, hsync.
2019-12-12 23:20:28 -05:00
Thomas Harte
f6f2b4b90f
Removes double DE edge test.
2019-12-12 22:50:35 -05:00
Thomas Harte
95b5db4d87
Tweaks timings yet further, adds a FIFO reset.
...
The accuracy of this may require further research.
2019-12-11 23:22:20 -05:00
Thomas Harte
de4403e021
Corrects blank timing.
2019-12-10 22:17:57 -05:00
Thomas Harte
0a405d1c06
Introduces a latency between DE and load.
2019-12-10 21:24:15 -05:00
Thomas Harte
768b3709b8
Corrects audio clock rate.
2019-12-10 20:25:27 -05:00
Thomas Harte
a7cfb840ef
Adds but presently disables a diagnostic for border elimination.
2019-12-08 22:34:42 -05:00
Thomas Harte
c785797da6
Adds a warning for unhandled reset.
2019-12-08 21:01:30 -05:00
Thomas Harte
0408592ada
Switches to byte buffers and seeks to reduce unnecessary video flushing.
2019-12-08 20:20:13 -05:00
Thomas Harte
0ed87c61bd
Introduces an explicit area of floating bus, starts adding bus errors.
2019-12-08 11:52:43 -05:00
Thomas Harte
08a27bdec7
NTSC frame length is correct; removes TODO.
2019-12-08 11:51:12 -05:00
Thomas Harte
894066984c
Moves beginning and end of vertical sync to what I now believe is its proper place.
...
At least one demo now successfully opens the top border.
2019-11-19 20:13:47 -05:00
Thomas Harte
e787c03530
Slightly shortens NTSC frame.
...
Either: (i) 263 is incorrect; or (ii) my logic as to frame height is incorrect. Given that the horizontal side of things is really well documented, I'm currently guessing (i). Research to do.
2019-11-18 23:47:27 -05:00
Thomas Harte
c04d2f6c6e
Restricts DTack delay to RAM and Shifter accesses.
2019-11-18 22:57:13 -05:00
Thomas Harte
6990abc0d3
Tweaks selected output mode when both BPP bits are set.
2019-11-18 22:56:40 -05:00
Thomas Harte
ade8df7217
Permits a delay on DE propagation back to the CPU. Plus tests.
...
Currently set at 28 cycles, but I don't know.
2019-11-18 22:12:24 -05:00
Thomas Harte
82c984afa4
Switches the joysticks around.
...
Thereby finally allowing me to control mode games.
2019-11-18 20:02:27 -05:00
Thomas Harte
1202b0a65f
Establishes a pipeline for delayed public state visibility.
2019-11-17 23:28:00 -05:00
Thomas Harte
facc0a1976
Amps up the documentation.
2019-11-17 21:28:51 -05:00
Thomas Harte
253dd84109
Corrects accidental dropping of pixel residue.
...
Specific issue: the repeated (start_column != end_column) test, which can no longer be correct if start_column has been incremented in the (x_&7) test.
The visible effect was to omit pixels from the output wave, which also affected observed sync timing.
2019-11-17 18:34:13 -05:00
Thomas Harte
2c4f372872
Adds support for the .ST file format.
2019-11-12 23:23:14 -05:00
Thomas Harte
f4cfca0451
Merge branch 'master' of github.com:TomHarte/CLK
2019-11-12 19:38:44 -05:00
Thomas Harte
eb287605f7
Switches to a default of TOS 1.04.
2019-11-12 19:38:30 -05:00
Thomas Harte
6a82c87320
Withdraws border optimisation temporarily; I think I may be onto an output bug here.
2019-11-12 19:33:13 -05:00
Thomas Harte
f0478225f0
Adjusts logic to reduce number of output spans.
2019-11-12 19:30:28 -05:00
Thomas Harte
c6f6bc68e1
Undoes non-insertion of media.
2019-11-10 21:52:06 -05:00
Thomas Harte
ab34fad8ca
Introduces a cleaner, separated shifter.
2019-11-10 21:39:40 -05:00
Thomas Harte
7ae0902103
Adds additional joystick commands to the dispatcher.
2019-11-09 20:10:54 -05:00
Thomas Harte
8e9428623e
Adds joystick events to the Atari ST.
2019-11-09 18:39:22 -05:00
Thomas Harte
2c25135d8a
Fixes const correctness for joystick machines; the ST is now one such.
2019-11-09 18:19:05 -05:00
Thomas Harte
860837d894
Corrects: KeyPad -> Keypad. Also fleshes out Atari ST keyboard mapping.
2019-11-09 18:02:14 -05:00
Thomas Harte
0204003680
Resolves GCC warnings.
2019-11-09 16:12:37 -05:00
Thomas Harte
77ef7dc8fc
Shuffles ST and 2600 into a common parent.
2019-11-09 15:31:41 -05:00
Thomas Harte
e3abbc9966
Renames what didn't end up being a whole SerialPort.
2019-11-09 15:21:51 -05:00
Thomas Harte
70c6010fe0
Expands visible area and adds a few more safety barriers.
2019-11-09 15:00:42 -05:00
Thomas Harte
45375fb5d0
Makes endian aware.
2019-11-09 09:48:59 -05:00
Thomas Harte
d2324e413d
Clarifies ownership of bpp-has-changed test.
2019-11-09 00:10:59 -05:00
Thomas Harte
e0c15f43bb
Avoids massive over-flushing of pixel buffers.
2019-11-09 00:05:02 -05:00
Thomas Harte
8b0d550b81
Attempts to move vertical sync out to cycle 30.
2019-11-08 22:18:47 -05:00
Thomas Harte
d1259f829e
Moves vertical state decisions back to cycle 502.
2019-11-08 21:42:05 -05:00
Thomas Harte
7caef46c05
Switches back to hsync for interrupts; corrects current address reads.
2019-11-08 21:25:28 -05:00
Thomas Harte
6902251d8b
Fixed: returns video address in bytes, not words.
2019-11-08 20:47:08 -05:00
Thomas Harte
0b683b0360
Adds some sanity checks.
2019-11-08 20:46:24 -05:00
Thomas Harte
5d5dc79f2c
Corrects raster race condition with CPU.
2019-11-07 23:27:05 -05:00
Thomas Harte
b7c407be10
The palette is meant to be read/write.
2019-11-07 23:11:06 -05:00
Thomas Harte
f45798faf0
Corrects initial safe value of line_length_.
2019-11-07 22:53:26 -05:00
Thomas Harte
7c66d7a13c
Corrects sync and line-length latch timings.
2019-11-07 22:53:04 -05:00
Thomas Harte
5e1570258d
I think the horizontal interrupt is blank, not sync.
2019-11-07 22:00:50 -05:00
Thomas Harte
fc8021c0b0
Adds a centre crop.
2019-11-07 20:02:45 -05:00
Thomas Harte
c9cd56915e
Corrects typo that was adding an extra line of PAL video.
2019-11-07 19:55:49 -05:00
Thomas Harte
1fd19c5786
Attempts to add proper bus timing.
2019-11-07 19:55:00 -05:00
Thomas Harte
ce66b5fd9c
Corrected member variable names.
2019-11-07 19:44:22 -05:00
Thomas Harte
8aa425c9d8
Fixes medium resolution mode.
2019-11-06 23:25:36 -05:00
Thomas Harte
ec68bc5047
Corrects output glitches: channel de sync and improper border beginnings.
2019-11-06 22:37:05 -05:00
Thomas Harte
0ce807805d
Eliminates most masks, at least for now.
2019-11-05 23:17:59 -05:00
Thomas Harte
41f3c29e30
Attempts to switch to correct video state machine.
...
Some glitches remain to be ironed out.
2019-11-05 23:02:25 -05:00
Thomas Harte
8df1eea955
Goes big on flushing.
2019-11-03 23:03:50 -05:00
Thomas Harte
eeafdf2c03
Slightly expands list of recognised Intelligent Keyboard commands.
2019-11-03 21:58:15 -05:00
Thomas Harte
befe2c2929
Adds floppy drive activity indicators.
2019-11-03 21:57:54 -05:00
Thomas Harte
e9965c2738
Obeys stated memory size.
2019-11-03 21:18:17 -05:00
Thomas Harte
48b0d8c329
Adds bus req/ack to the DMA controller; hacks support into the ST.
2019-11-03 21:11:25 -05:00
Thomas Harte
4dbd2a805a
Nudges closer to DMA support.
2019-11-03 17:24:36 -05:00
Thomas Harte
20bf425f98
Drive select lines are active low.
2019-11-02 23:37:56 -04:00
Thomas Harte
0567410bcf
Attempts to start getting the WDC working.
2019-11-02 23:26:42 -04:00
Thomas Harte
6d1e09ba55
Connects up the AY to floppy drive/side selection.
2019-11-02 23:04:08 -04:00
Thomas Harte
f40dbefa67
Implements most of keyboard input.
2019-11-02 22:30:02 -04:00
Thomas Harte
f93cdd21de
Reverses bit order.
...
So, for the first time: a green desktop.
2019-11-02 21:53:04 -04:00
Thomas Harte
e1dc3b1915
Reverses mouse buttons.
...
So I can now navigate the disk-less GEM desktop and click on things.
2019-11-02 21:38:57 -04:00
Thomas Harte
cbf25a16dc
Adds relative mouse motion input.
2019-11-02 21:25:45 -04:00
Thomas Harte
bf7e9cfd62
Pulls the intelligent keyboard into its own file.
2019-11-02 19:47:44 -04:00
Thomas Harte
a67e0014a4
Fixes video base address and mono/colour monitor value.
...
Now I see a GEM desktop. In blue.
2019-11-02 19:36:15 -04:00
Thomas Harte
c070f2100c
Attempts to regularise data bus access.
2019-11-01 23:01:06 -04:00
Thomas Harte
75e34b4215
Reacts to no acknowledgement.
2019-10-31 21:00:05 -04:00
Thomas Harte
731dc350b4
Adds sometime real-time clocking for DMA.
2019-10-30 22:59:32 -04:00
Thomas Harte
635e18a50d
Ensures the MFP requests and receives real-time clocking when needed.
2019-10-30 22:42:06 -04:00
Thomas Harte
1c154131f9
Expands size of storage in Cycles/HalfCycles; adjusts widely to compensate.
2019-10-29 22:36:29 -04:00
Thomas Harte
1135576a3a
Comments in slightly more detail.
2019-10-28 22:12:56 -04:00
Thomas Harte
1d790ec2a9
Adds the option for a clock conversion to JustInTimeActor and slows the MFP's clock rate.
2019-10-28 21:35:10 -04:00
Thomas Harte
0f2d72c436
Ensures receipt of output line changes.
2019-10-28 21:21:53 -04:00
Thomas Harte
4a1fa8fc13
Adds some const qualifiers.
2019-10-28 21:13:42 -04:00
Thomas Harte
95d3b6e79f
Adds a through route for the FDC interrupt line.
2019-10-28 21:13:21 -04:00
Thomas Harte
d44734d105
Attempts a fuller setting of GPIP inputs.
2019-10-27 22:39:21 -04:00
Thomas Harte
1aaa6331a0
Stores and returns video mode.
2019-10-27 22:39:00 -04:00
Thomas Harte
0cb19421e8
Adds prefix to mouse position response.
2019-10-27 21:46:03 -04:00
Thomas Harte
92847037b3
Merge branch 'master' into AtariST
2019-10-27 21:40:51 -04:00
Thomas Harte
0fc191c87d
Switched a few static_cast
to constructor syntax.
2019-10-27 14:21:22 -04:00
Thomas Harte
dc4a0e4e3b
Video only ever reads from RAM, so it can be const *.
...
(it can also be *const, since I set it only once)
2019-10-27 14:09:38 -04:00
Thomas Harte
36a9a5288b
Adds drives to the FDC.
2019-10-26 22:39:11 -04:00
Thomas Harte
ac39fd0235
Starts work on the DMA controller.
2019-10-26 21:33:57 -04:00
Thomas Harte
ecc0cea5a1
Added a potential branch for the newer TOS memory map.
2019-10-26 16:52:06 -04:00
Thomas Harte
eae11cbf17
Adds a dummy response for mouse interrogation.
2019-10-26 16:14:24 -04:00
Thomas Harte
2207638287
Adds hsync and vsync interrupts.
2019-10-25 22:42:13 -04:00
Thomas Harte
872897029e
Attempts a complete wiring of 68901 interrupts.
2019-10-25 22:36:01 -04:00
Thomas Harte
51b4b5551d
Actually, I think the 6850 is active low for interrupts.
2019-10-24 22:37:53 -04:00
Thomas Harte
092a61f93e
Does a better job of having just 512kb.
2019-10-21 23:10:30 -04:00
Thomas Harte
e30ba58e0d
Attempts to wire ACIA interrupt signals into the MFP.
2019-10-21 23:02:30 -04:00
Thomas Harte
83d73fb088
The keyboard now responds to a reset on its serial line.
2019-10-20 23:13:44 -04:00
Thomas Harte
75c3e2dacd
Adds basic, incomplete dispatcher for the intelligent keyboard.
2019-10-20 23:07:19 -04:00
Thomas Harte
cf07982a9b
Ensures good serial line and ACIA behaviour.
...
Next stop: having the intelligent keyboard react.
2019-10-20 22:10:05 -04:00
Thomas Harte
313aaa8f95
Silences temporarily.
2019-10-20 20:38:56 -04:00
Thomas Harte
696af5c3a6
Starts to transfer serial line decoding logic into the line itself.
2019-10-20 20:38:56 -04:00
Thomas Harte
9a8352282d
Mostly but not quite fixes serial work.
2019-10-20 20:38:55 -04:00
Thomas Harte
34075a7674
Attempts to tie an intelligent keyboard to the other end of its serial line.
2019-10-20 20:38:55 -04:00
Thomas Harte
ff62eb6dce
The ACIA actually has two clocks, though on an ST they're both 500,000 Hz.
2019-10-20 20:38:55 -04:00
Thomas Harte
374439693e
Ensures serial lines know their writer's clock rate.
2019-10-20 20:38:55 -04:00
Thomas Harte
c4ef33b23f
JustInTimeActors can now specify a clock divider.
2019-10-20 20:38:55 -04:00
Thomas Harte
4e5b440145
Attempts mostly to implement 6850 output.
2019-10-20 20:38:55 -04:00
Thomas Harte
97d44129cb
Ensures all 16 data lines reach the video.
2019-10-20 20:38:55 -04:00
Thomas Harte
b0f5f7bd37
Attempts to start producing actual video.
2019-10-20 20:38:55 -04:00
Thomas Harte
a59ec9e818
Provides a token something where DMA should be.
2019-10-20 20:38:55 -04:00
Thomas Harte
4ead905c3c
Adds an empty shell for the ACIA.
2019-10-20 20:38:55 -04:00
Thomas Harte
127bb043e7
Adds enough logic to advance to an ACIA access error.
2019-10-20 20:38:55 -04:00
Thomas Harte
42ebe06474
Makes an attempt at tracking video sequence points.
2019-10-20 20:38:55 -04:00
Thomas Harte
74fe32da23
Takes a shot at other display outputs.
2019-10-20 20:38:55 -04:00
Thomas Harte
780916551f
Corrects sync generation.
2019-10-20 20:38:54 -04:00
Thomas Harte
305b1211ba
Makes a first attempt to box out the ST display area.
2019-10-20 20:38:54 -04:00
Thomas Harte
2cf52fb89c
Makes an unsuccessful first attempt at some timer functionality.
2019-10-20 20:38:54 -04:00
Thomas Harte
6e1b606adf
Adds a target for MFP read/write operations.
...
Completely without any implementation, so far.
2019-10-20 20:38:54 -04:00
Thomas Harte
3bb0bf9e14
Adds some semblance of an AY.
2019-10-20 20:38:54 -04:00
Thomas Harte
87a6d22894
Starts to formalise the ST memory map a little.
2019-10-20 20:38:54 -04:00
Thomas Harte
484a0ceeb8
Starts forming an Atari ST memory map.
2019-10-20 20:38:54 -04:00
Thomas Harte
da1436abd2
Gifts the Atari ST a 68000 and non-functional video.
2019-10-20 20:38:54 -04:00
Thomas Harte
125f781ced
Starts to create an actual shell of a machine.
2019-10-20 20:38:54 -04:00
Thomas Harte
8b397626bf
Adds a route through the static analyser to the Atari ST.
2019-10-20 20:38:54 -04:00
Thomas Harte
0da1881a07
Adds an Atari ST enumeration and factory method.
2019-10-20 20:38:54 -04:00
Thomas Harte
95c45b5515
This can be const.
2019-10-20 17:22:56 -04:00
Thomas Harte
735586f5f8
Corrects tabs; adds potential output_border optimisation.
2019-10-19 21:20:34 -04:00
Thomas Harte
3c146a3fb2
Adds missing Master System enumerations.
2019-09-30 21:10:30 -04:00
Thomas Harte
4ac3839185
Seeks to ensure that card transitions between real-time and just-in-time don't break timing.
2019-09-28 18:34:04 -04:00
Thomas Harte
fbf95ec2b8
Removes the now empty local namespace.
2019-09-24 22:48:47 -04:00
Thomas Harte
077c7d767f
Shifts essential modifiers up to the Keyboard class.
...
I had forgotten that mappers are not exposed.
2019-09-22 13:48:50 -04:00
Thomas Harte
a416bc0058
Adds an interface allowing keyboard mappers to declare modifiers that are 'essential'.
...
i.e. ones that, if not delivered reliably, will cause the related machine to behave unexpectedly.
2019-09-22 13:14:09 -04:00
Thomas Harte
5f16fa8c08
Removes dead reference to video from VIAPortHandler.
2019-09-21 17:39:45 -04:00
Thomas Harte
e7bf0799b6
Implements every-other-cycle-during-pixels RAM timing.
2019-09-21 17:25:20 -04:00
Thomas Harte
2e24da4614
Implements quick booting, and edges towards exposing it on the Mac.
...
It should already work in kiosk mode.
2019-09-19 22:32:12 -04:00
Thomas Harte
e46601872b
Establishes that the Macintosh offers the quick-boot option.
2019-09-19 21:50:39 -04:00
Thomas Harte
776b819a5a
Adds the SCSI bus as an Activity::Source.
2019-09-19 19:31:22 -04:00
Thomas Harte
962275c22a
Removes clock for NCR 5380.
...
It doesn't have one in real life, and now can live off the time counting that occurs on the SCSI bus.
2019-09-18 20:17:47 -04:00
Thomas Harte
243e40cd79
Adds signalling of DACK.
2019-09-14 13:48:33 -04:00
Thomas Harte
1c7e0f3c9d
Fixes control line modification by the 5380 and SCSI target command chaining.
...
So now I'm back to trying to guess how a SCSI command terminates re: the relative meanings of a message phase and a status phase.
2019-09-02 23:14:37 -04:00
Thomas Harte
318cdb41ea
Adds SCSI bus clocking to the Macintosh, and fixes its internal counting.
2019-09-02 16:03:33 -04:00
Thomas Harte
2f8e31bc8b
Takes a first bash at implementing the new SCSI::Bus timing infrastructure.
2019-09-02 13:00:01 -04:00
Thomas Harte
1a60ced61b
Starts trying to deal with creating a whole volume from merely a partition.
2019-08-25 23:03:54 -04:00
Thomas Harte
ca08716c52
Introduces real hard disk images to the nascent world of SCSI.
2019-08-25 17:03:41 -04:00
Thomas Harte
90cf99b626
Takes a wild swings at speeding up startup.
...
With no success.
2019-08-18 22:40:16 -04:00
Thomas Harte
f668e4a54c
Makes an attempt at getting the 5380 past arbitration.
...
Not entirely successful. Also gets a bit smarter with `final` on ClockingHint::Sources.
2019-08-15 23:14:40 -04:00
Thomas Harte
0f67e490e8
Adjusts NCR address decoding to produce a more plausible initial interaction.
2019-08-11 22:43:25 -04:00
Thomas Harte
895c315fa5
Increases the Mac Plus too 4mb.
2019-08-11 21:41:12 -04:00
Thomas Harte
a90a74a512
Stubs in just enough of the 5380 to get a Mac Plus too boot.
2019-08-11 20:55:20 -04:00
Thomas Harte
bbd4e4d3dc
Enhances memory map fidelity to allow for ROM holes on the Mac Plus.
...
This is how the ROM detects the difference between the Plus and the 512ke, it seems.
2019-08-10 23:53:34 -04:00
Thomas Harte
bac0461f7f
Switches the drive-speed accumulator to the delegate pattern.
...
This allows the Macintosh to ensure that the IWM is kept up just-in-time with drive speed changes.
2019-08-07 21:39:23 -04:00
Thomas Harte
f26a200d78
Switches to a JustInTimeActor to wrap the IWM.
...
Also simplifies potential future usage of the IWM template.
2019-08-07 21:28:02 -04:00
Thomas Harte
0e293e4983
Relocates RAM delay test in order to scrape out a minor performance win.
2019-08-03 21:46:45 -04:00