Thomas Harte
0e29c6b0ab
On further reflection, I think events should occur after the running period.
...
I'm testing this now for sanity in 2/4bpp mode.
2020-01-28 23:26:37 -05:00
Thomas Harte
c5edc879b6
Switches back to testing the monochrome monitor.
2020-01-28 22:12:57 -05:00
Thomas Harte
65309e60c4
Corrects sequence point generation by allowing for hsync_end != end of line.
2020-01-28 20:38:20 -05:00
Thomas Harte
2c0cab9e4d
Adds line length latching as a line event.
2020-01-28 20:22:37 -05:00
Thomas Harte
b1ff031b54
Fixes runtime test.
2020-01-27 23:41:08 -05:00
Thomas Harte
7e8405e68a
Makes 72Hz horizontal sync independently relocatable.
...
... and moves and shortens it, based on my guesswork as to requirements.
2020-01-27 23:40:01 -05:00
Thomas Harte
c8fd00217d
Resolves loss of horizontal resolution in 1bpp mode.
2020-01-27 23:08:28 -05:00
Thomas Harte
9d340599a6
Towards ST 1bpp support: puts vsync in an appropriate location, starts experimenting with proper CRT timings.
2020-01-27 23:00:30 -05:00
Thomas Harte
7316a3aa88
Merge branch 'master' into FinalOverride
2020-01-26 23:42:25 -05:00
Thomas Harte
b514756272
Adds the option to run machines at a multiple of their real speeds.
...
Exposed to SDL users only, for now.
2020-01-26 13:25:23 -05:00
Thomas Harte
79bb0f8222
Updates comment.
2020-01-26 11:36:06 -05:00
Thomas Harte
43bf6aca67
Corrects reported scan status for the Amstrad CPC.
2020-01-25 23:46:18 -05:00
Thomas Harte
03d23aad41
Corrects reported ZX80/81 scan status.
2020-01-25 23:27:09 -05:00
Thomas Harte
294e09f275
All these 'override's can be 'final's.
...
At least for the purpose of being communicative. I doubt there's much to gain in terms of compiler output — the DiskImageHolder can avoid some virtual lookups but nothing else leaps out.
2020-01-23 22:57:51 -05:00
Thomas Harte
ba516387ba
In all these instances, final => override. So no need to repeat myself.
2020-01-23 22:35:39 -05:00
Thomas Harte
9136917f00
Enables the Oric for 50/60Hz mode switching, inventing PAL60 for the purpose.
2020-01-23 22:14:02 -05:00
Thomas Harte
6802318784
Removes audio_queue_.flush() calls; I don't think I really need to block. At least, not usually.
2020-01-23 20:13:16 -05:00
Thomas Harte
428d141bc9
Factors out the logic behind the Atari 2600's frequency switching.
2020-01-23 20:12:44 -05:00
Thomas Harte
a86fb33789
Ensures that the ColecoVision, MSX and Master System fully flush.
2020-01-22 22:57:16 -05:00
Thomas Harte
beefb70f75
Adds vertical sync as something that can be run_until.
2020-01-22 22:20:56 -05:00
Thomas Harte
8404409c0d
Causes the Atari 2600 to obey normal flush semantics.
...
This stuff is going to become more important with run_until.
2020-01-22 22:05:51 -05:00
Thomas Harte
a71c5946f0
Ensures proper manipulation of scan_statuses, leading to the correct result out of a CRTMachine.
...
Possibly with the exception of the TMS, as I appear to have uncovered an unrelated issue there.
2020-01-21 22:28:25 -05:00
Thomas Harte
d97a073d1b
Adds the necessary routine for all machines to be able to respond to get_scan_status.
...
They all just as the CRT, as all are currently based on the CRT. Which doesn't currently know the total clock rate it would need to in order properly to scale the answer to the question. Further thought coming.
2020-01-20 21:45:10 -05:00
Thomas Harte
3c760e585a
Switches to accepting a bit mask of events to run_until.
2020-01-20 16:08:21 -05:00
Thomas Harte
cb61e84868
Starts building out higher-level run_until
functionality.
...
Specifically: you can now run until the next set of speaker samples has been delivered.
2020-01-20 12:12:23 -05:00
Thomas Harte
8349005c4b
Adds CRTMachine::run_until, which will run until a condition is true.
...
I want to get to being able to say "run until the beam is 60% of the way down", "run until a new packet of audio has been delivered", etc.
2020-01-19 23:52:47 -05:00
Thomas Harte
d30f83871d
Corrects Jasmin activity light.
2020-01-16 22:59:43 -05:00
Thomas Harte
efd684dc56
Opts the BD-500 in for modified Shugart RDY.
...
Hopefully this is correct. I'm presently mystified as to other options.
2020-01-16 21:34:57 -05:00
Thomas Harte
1972ca00a4
Fixes quick-NTSC-avoidance fix.
...
I suspect this is very temporary, but here it is.
2020-01-16 00:01:16 -05:00
Thomas Harte
c606931c93
Ensures a safe default-selected drive.
2020-01-15 23:56:44 -05:00
Thomas Harte
93cecf0882
Ensures no possible initial NTSC, removes printfs.
2020-01-15 23:47:45 -05:00
Thomas Harte
aac3d27c10
Adds activity indicators for the BD-500 and Jasmin.
...
Also slightly cleans up DiskController a little further.
2020-01-15 23:39:15 -05:00
Thomas Harte
91fae86e73
Factors out paging, implements a bit more of the BD500.
...
That is, enough seemingly fully to work, if I force the drive to report ready.
2020-01-15 23:15:39 -05:00
Thomas Harte
f5c194386c
Ties head load to ready.
...
BD-DOS no longer perpetually retries.
2020-01-14 23:45:36 -05:00
Thomas Harte
62c3720c97
Adds status register and shout-outs on other address access.
2020-01-14 23:24:11 -05:00
Thomas Harte
f258fc2971
Adds enough of a BD500 for the boot sector seemingly to load.
2020-01-14 23:15:27 -05:00
Thomas Harte
6b84ae3095
Makes the Microdisc also a DiskController, and simplifies delegate interface.
2020-01-14 22:53:27 -05:00
Thomas Harte
5dd8c677f1
Factors out from the Jasmin the stuff that I'm going to need to repeat for the BD-500.
2020-01-14 22:23:00 -05:00
Thomas Harte
3ced31043a
Makes Jasmin autoboot optional, adds a Jasmin reset key, adds the Jasmin to File -> New... .
...
Also finally implements KeyNMI.
2020-01-05 21:57:33 -05:00
Thomas Harte
7361e7ec34
Fixed: the issue was failing to propagate motor control.
...
Also it seems to be incorrect to have the Jasmin paged at initial boot.
2020-01-05 21:35:20 -05:00
Thomas Harte
533729638c
It seems like Jasmin paged in at boot, and button = page back in and reset works?
...
At least, that gets me a 'boot failed' error. Which is something.
2020-01-05 20:34:15 -05:00
Thomas Harte
9f30be1c13
Attempts to implement most of a Jasmin disk interface.
...
With one obvious omission: there's no way to start it? The real interface had a dedicated button, but I don't yet know what that button did. Research needed.
2020-01-05 20:05:55 -05:00
Thomas Harte
c1bae49a92
Standardises on read
and write
for bus accesses.
...
Logic being: name these things for the bus action they model, not the effect they have.
2020-01-05 13:40:02 -05:00
Thomas Harte
e4349f5e05
Slightly clarifies logic.
2020-01-04 21:32:34 -05:00
Thomas Harte
7b2777ac08
Sorts cases into order; adds copious audio mirrors.
2020-01-04 21:06:21 -05:00
Thomas Harte
0fbcbfc61b
Switches to more idiomatic address listing.
2020-01-04 20:35:47 -05:00
Thomas Harte
3ab4fb8c79
Enables an assumption of partial address decoding at the ACIA and PSG.
2020-01-04 17:27:55 -05:00
Thomas Harte
19ddfae6d6
Adds Joystick key code mode, ensures events aren't posted in interrogation mode.
...
This should fix Turrican due to the latter change; I'm not aware of software that uses the former.
2020-01-04 09:45:59 -05:00
Thomas Harte
414b0cc234
Reintroduces sync write delay.
2020-01-02 23:36:11 -05:00
Thomas Harte
134e828336
Updates note to self.
2020-01-02 23:33:35 -05:00
Thomas Harte
455e831b87
Corrects bug whereby changing pixel mode mid-line will produce an improper amount of data.
2020-01-02 23:18:21 -05:00
Thomas Harte
42ccf48966
Judging by Pompey Pirates Menu 88, vsync should occur a line earlier, ending during line 0.
2020-01-02 20:16:28 -05:00
Thomas Harte
2f8078db22
Switches to should_log as a global when I'm hacking about.
2020-01-02 20:15:48 -05:00
Thomas Harte
23ed9ad2de
Corrects application of negative relative scale.
2020-01-01 13:22:21 -05:00
Thomas Harte
017681a97c
Now honours permitted mouse range.
2020-01-01 12:48:38 -05:00
Thomas Harte
90b899c00e
Attempts to implement absolute mouse positioning mode.
...
Along with mouse direction.
2020-01-01 12:29:33 -05:00
Thomas Harte
c11fe25537
Merge branch 'master' into EnchantedWoods
2019-12-30 23:32:45 -05:00
Thomas Harte
0a12893d63
Shunts vsync back down to top of frame.
...
It's guess after guess, basically.
2019-12-30 23:01:31 -05:00
Thomas Harte
8e777c299f
Switches to latching video interrupts until acknowledged.
...
Seems to fix Cisco Heat, at least. I have no idea whether I'm latching the correct thing, whether IACK should clear both or only one, etc.
2019-12-30 23:00:55 -05:00
Thomas Harte
e23d1a2958
Restores vsync active.
2019-12-29 22:03:36 -05:00
Thomas Harte
6449403f6a
Corrects pending_events_ test for sequence points.
...
Simplifies around as possible.
2019-12-29 21:53:45 -05:00
Thomas Harte
c8fe66092b
Attempts to correct insertion logic (and mostly bypasses it).
2019-12-29 21:42:41 -05:00
Thomas Harte
b33218c61e
Fixes reload test, which really needs to sense the CRT-headed vsync output.
...
i.e. not the one heading back to the CPU.
2019-12-29 20:55:34 -05:00
Thomas Harte
8ce26e7182
Adds a delay on vsync visibility (i.e. as to generating an interrupt).
2019-12-29 19:03:08 -05:00
Thomas Harte
47068ee081
Ensures visible hsync end generates a sequence point.
2019-12-29 17:51:50 -05:00
Thomas Harte
214b6a254a
Adds a delay on visibility of the hsync signal, and a test on address reload.
2019-12-29 17:37:09 -05:00
Thomas Harte
93f6964d8a
Introduces some preliminary line length unit tests.
...
Thereby fixes one potential issue with load_ toggling.
2019-12-28 22:50:34 -05:00
Thomas Harte
13f11e071a
Simplifies border colour change propagation.
...
I'm not sure it was even technically correct as was.
2019-12-28 10:45:10 -05:00
Thomas Harte
f7825dd2a2
Pulls out address reload position as a separate constant.
2019-12-28 10:36:50 -05:00
Thomas Harte
a9d1f5d925
Pulls out address reload as something I can position independently.
...
Sadly receding it by 3 did not have the effect I was hoping for, of receding Enchanted Land's first register tweaking.
2019-12-27 23:47:19 -05:00
Thomas Harte
2757e5d600
Removes untrue comment.
2019-12-27 22:51:11 -05:00
Thomas Harte
5026de9653
Rejigs the video stream to ensure shifter really is continuous.
...
... and definitively to avoid potential buffer overruns. Or, at least, to have a mechanism in place definitively to avoid them. Which will be tested and debugged as necessary.
Also simplifies the colour burst and border/pixels selection logic.
2019-12-27 22:47:34 -05:00
Thomas Harte
5fa8e046d8
It's inaccurrate to call this _the_ shifter. So don't.
2019-12-27 19:03:10 -05:00
Thomas Harte
de43e86310
Permits Vic-20 memory to be specified in banks; adds recognition of TheC64-style file tags to specify them.
2019-12-26 22:49:48 -05:00
Thomas Harte
a9a92de954
Adds a bunch of shout-outs for unimplemented behaviour.
2019-12-25 15:32:33 -05:00
Thomas Harte
a8ba3607b7
Adds (and disables) a minor additional piece of logging.
2019-12-24 21:43:39 -05:00
Thomas Harte
5068328a15
Fixes debugging output.
2019-12-24 19:15:58 -05:00
Thomas Harte
b2bed82da6
Switches to standard logging.
2019-12-23 22:00:40 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
5456a4a39d
Eliminates static
where constexpr
a aren't class members; adds some if constexpr
s for clarity.
2019-12-22 13:42:24 -05:00
Thomas Harte
274867579b
Deploys constexpr
as a stricter const
.
2019-12-22 00:22:17 -05:00
Thomas Harte
05d77d3297
Also deploys make_unique/shared to avoid type repetition.
2019-12-21 23:52:04 -05:00
Thomas Harte
e5440a4146
Hacks in a colour burst.
...
With a major flaw: it's implicit. I think I need a minor rethink of various components here.
2019-12-20 23:49:38 -05:00
Thomas Harte
47508d50a7
Wires through a composite video option for the ST.
...
Which is great and all, except that I've not yet inserted a colour burst. So it's monochrome.
2019-12-20 20:49:14 -05:00
Thomas Harte
3d83f5ab49
Ensures a proper size
handoff and implements a ripple feature I happened to find a forum post about.
2019-12-19 22:58:07 -05:00
Thomas Harte
0007dc23b3
Eliminates bit 0 of the DMA address.
2019-12-19 22:44:21 -05:00
Thomas Harte
ed7f171736
Moves address reload to end of vertical sync.
...
I have no information as to when it should be, so this is as valid a guess as any other.
2019-12-19 22:20:43 -05:00
Thomas Harte
0e066f0f70
Removes 'done' TODO.
...
For certain values of done.
2019-12-19 22:19:59 -05:00
Thomas Harte
d85ae21b2f
Adds an explicit declaration of chip type to all AY users.
2019-12-18 19:28:41 -05:00
Thomas Harte
c00ae7ce6a
Adds a one-cycle delay on frequency changes.
2019-12-13 19:57:54 -05:00
Thomas Harte
4bcf217324
Ensures delayed loading isn't interrupted by blank, hsync.
2019-12-12 23:20:28 -05:00
Thomas Harte
f6f2b4b90f
Removes double DE edge test.
2019-12-12 22:50:35 -05:00
Thomas Harte
95b5db4d87
Tweaks timings yet further, adds a FIFO reset.
...
The accuracy of this may require further research.
2019-12-11 23:22:20 -05:00
Thomas Harte
de4403e021
Corrects blank timing.
2019-12-10 22:17:57 -05:00
Thomas Harte
0a405d1c06
Introduces a latency between DE and load.
2019-12-10 21:24:15 -05:00
Thomas Harte
768b3709b8
Corrects audio clock rate.
2019-12-10 20:25:27 -05:00
Thomas Harte
a7cfb840ef
Adds but presently disables a diagnostic for border elimination.
2019-12-08 22:34:42 -05:00
Thomas Harte
c785797da6
Adds a warning for unhandled reset.
2019-12-08 21:01:30 -05:00
Thomas Harte
0408592ada
Switches to byte buffers and seeks to reduce unnecessary video flushing.
2019-12-08 20:20:13 -05:00
Thomas Harte
0ed87c61bd
Introduces an explicit area of floating bus, starts adding bus errors.
2019-12-08 11:52:43 -05:00
Thomas Harte
08a27bdec7
NTSC frame length is correct; removes TODO.
2019-12-08 11:51:12 -05:00
Thomas Harte
894066984c
Moves beginning and end of vertical sync to what I now believe is its proper place.
...
At least one demo now successfully opens the top border.
2019-11-19 20:13:47 -05:00
Thomas Harte
e787c03530
Slightly shortens NTSC frame.
...
Either: (i) 263 is incorrect; or (ii) my logic as to frame height is incorrect. Given that the horizontal side of things is really well documented, I'm currently guessing (i). Research to do.
2019-11-18 23:47:27 -05:00
Thomas Harte
c04d2f6c6e
Restricts DTack delay to RAM and Shifter accesses.
2019-11-18 22:57:13 -05:00
Thomas Harte
6990abc0d3
Tweaks selected output mode when both BPP bits are set.
2019-11-18 22:56:40 -05:00
Thomas Harte
ade8df7217
Permits a delay on DE propagation back to the CPU. Plus tests.
...
Currently set at 28 cycles, but I don't know.
2019-11-18 22:12:24 -05:00
Thomas Harte
82c984afa4
Switches the joysticks around.
...
Thereby finally allowing me to control mode games.
2019-11-18 20:02:27 -05:00
Thomas Harte
1202b0a65f
Establishes a pipeline for delayed public state visibility.
2019-11-17 23:28:00 -05:00
Thomas Harte
facc0a1976
Amps up the documentation.
2019-11-17 21:28:51 -05:00
Thomas Harte
253dd84109
Corrects accidental dropping of pixel residue.
...
Specific issue: the repeated (start_column != end_column) test, which can no longer be correct if start_column has been incremented in the (x_&7) test.
The visible effect was to omit pixels from the output wave, which also affected observed sync timing.
2019-11-17 18:34:13 -05:00
Thomas Harte
2c4f372872
Adds support for the .ST file format.
2019-11-12 23:23:14 -05:00
Thomas Harte
f4cfca0451
Merge branch 'master' of github.com:TomHarte/CLK
2019-11-12 19:38:44 -05:00
Thomas Harte
eb287605f7
Switches to a default of TOS 1.04.
2019-11-12 19:38:30 -05:00
Thomas Harte
6a82c87320
Withdraws border optimisation temporarily; I think I may be onto an output bug here.
2019-11-12 19:33:13 -05:00
Thomas Harte
f0478225f0
Adjusts logic to reduce number of output spans.
2019-11-12 19:30:28 -05:00
Thomas Harte
c6f6bc68e1
Undoes non-insertion of media.
2019-11-10 21:52:06 -05:00
Thomas Harte
ab34fad8ca
Introduces a cleaner, separated shifter.
2019-11-10 21:39:40 -05:00
Thomas Harte
7ae0902103
Adds additional joystick commands to the dispatcher.
2019-11-09 20:10:54 -05:00
Thomas Harte
8e9428623e
Adds joystick events to the Atari ST.
2019-11-09 18:39:22 -05:00
Thomas Harte
2c25135d8a
Fixes const correctness for joystick machines; the ST is now one such.
2019-11-09 18:19:05 -05:00
Thomas Harte
860837d894
Corrects: KeyPad -> Keypad. Also fleshes out Atari ST keyboard mapping.
2019-11-09 18:02:14 -05:00
Thomas Harte
0204003680
Resolves GCC warnings.
2019-11-09 16:12:37 -05:00
Thomas Harte
77ef7dc8fc
Shuffles ST and 2600 into a common parent.
2019-11-09 15:31:41 -05:00
Thomas Harte
e3abbc9966
Renames what didn't end up being a whole SerialPort.
2019-11-09 15:21:51 -05:00
Thomas Harte
70c6010fe0
Expands visible area and adds a few more safety barriers.
2019-11-09 15:00:42 -05:00
Thomas Harte
45375fb5d0
Makes endian aware.
2019-11-09 09:48:59 -05:00
Thomas Harte
d2324e413d
Clarifies ownership of bpp-has-changed test.
2019-11-09 00:10:59 -05:00
Thomas Harte
e0c15f43bb
Avoids massive over-flushing of pixel buffers.
2019-11-09 00:05:02 -05:00
Thomas Harte
8b0d550b81
Attempts to move vertical sync out to cycle 30.
2019-11-08 22:18:47 -05:00
Thomas Harte
d1259f829e
Moves vertical state decisions back to cycle 502.
2019-11-08 21:42:05 -05:00
Thomas Harte
7caef46c05
Switches back to hsync for interrupts; corrects current address reads.
2019-11-08 21:25:28 -05:00
Thomas Harte
6902251d8b
Fixed: returns video address in bytes, not words.
2019-11-08 20:47:08 -05:00
Thomas Harte
0b683b0360
Adds some sanity checks.
2019-11-08 20:46:24 -05:00
Thomas Harte
5d5dc79f2c
Corrects raster race condition with CPU.
2019-11-07 23:27:05 -05:00
Thomas Harte
b7c407be10
The palette is meant to be read/write.
2019-11-07 23:11:06 -05:00
Thomas Harte
f45798faf0
Corrects initial safe value of line_length_.
2019-11-07 22:53:26 -05:00
Thomas Harte
7c66d7a13c
Corrects sync and line-length latch timings.
2019-11-07 22:53:04 -05:00
Thomas Harte
5e1570258d
I think the horizontal interrupt is blank, not sync.
2019-11-07 22:00:50 -05:00
Thomas Harte
fc8021c0b0
Adds a centre crop.
2019-11-07 20:02:45 -05:00
Thomas Harte
c9cd56915e
Corrects typo that was adding an extra line of PAL video.
2019-11-07 19:55:49 -05:00
Thomas Harte
1fd19c5786
Attempts to add proper bus timing.
2019-11-07 19:55:00 -05:00
Thomas Harte
ce66b5fd9c
Corrected member variable names.
2019-11-07 19:44:22 -05:00
Thomas Harte
8aa425c9d8
Fixes medium resolution mode.
2019-11-06 23:25:36 -05:00
Thomas Harte
ec68bc5047
Corrects output glitches: channel de sync and improper border beginnings.
2019-11-06 22:37:05 -05:00
Thomas Harte
0ce807805d
Eliminates most masks, at least for now.
2019-11-05 23:17:59 -05:00
Thomas Harte
41f3c29e30
Attempts to switch to correct video state machine.
...
Some glitches remain to be ironed out.
2019-11-05 23:02:25 -05:00
Thomas Harte
8df1eea955
Goes big on flushing.
2019-11-03 23:03:50 -05:00
Thomas Harte
eeafdf2c03
Slightly expands list of recognised Intelligent Keyboard commands.
2019-11-03 21:58:15 -05:00
Thomas Harte
befe2c2929
Adds floppy drive activity indicators.
2019-11-03 21:57:54 -05:00
Thomas Harte
e9965c2738
Obeys stated memory size.
2019-11-03 21:18:17 -05:00
Thomas Harte
48b0d8c329
Adds bus req/ack to the DMA controller; hacks support into the ST.
2019-11-03 21:11:25 -05:00
Thomas Harte
4dbd2a805a
Nudges closer to DMA support.
2019-11-03 17:24:36 -05:00
Thomas Harte
20bf425f98
Drive select lines are active low.
2019-11-02 23:37:56 -04:00
Thomas Harte
0567410bcf
Attempts to start getting the WDC working.
2019-11-02 23:26:42 -04:00
Thomas Harte
6d1e09ba55
Connects up the AY to floppy drive/side selection.
2019-11-02 23:04:08 -04:00
Thomas Harte
f40dbefa67
Implements most of keyboard input.
2019-11-02 22:30:02 -04:00
Thomas Harte
f93cdd21de
Reverses bit order.
...
So, for the first time: a green desktop.
2019-11-02 21:53:04 -04:00
Thomas Harte
e1dc3b1915
Reverses mouse buttons.
...
So I can now navigate the disk-less GEM desktop and click on things.
2019-11-02 21:38:57 -04:00
Thomas Harte
cbf25a16dc
Adds relative mouse motion input.
2019-11-02 21:25:45 -04:00
Thomas Harte
bf7e9cfd62
Pulls the intelligent keyboard into its own file.
2019-11-02 19:47:44 -04:00
Thomas Harte
a67e0014a4
Fixes video base address and mono/colour monitor value.
...
Now I see a GEM desktop. In blue.
2019-11-02 19:36:15 -04:00
Thomas Harte
c070f2100c
Attempts to regularise data bus access.
2019-11-01 23:01:06 -04:00
Thomas Harte
75e34b4215
Reacts to no acknowledgement.
2019-10-31 21:00:05 -04:00
Thomas Harte
731dc350b4
Adds sometime real-time clocking for DMA.
2019-10-30 22:59:32 -04:00
Thomas Harte
635e18a50d
Ensures the MFP requests and receives real-time clocking when needed.
2019-10-30 22:42:06 -04:00
Thomas Harte
1c154131f9
Expands size of storage in Cycles/HalfCycles; adjusts widely to compensate.
2019-10-29 22:36:29 -04:00
Thomas Harte
1135576a3a
Comments in slightly more detail.
2019-10-28 22:12:56 -04:00
Thomas Harte
1d790ec2a9
Adds the option for a clock conversion to JustInTimeActor and slows the MFP's clock rate.
2019-10-28 21:35:10 -04:00
Thomas Harte
0f2d72c436
Ensures receipt of output line changes.
2019-10-28 21:21:53 -04:00
Thomas Harte
4a1fa8fc13
Adds some const qualifiers.
2019-10-28 21:13:42 -04:00
Thomas Harte
95d3b6e79f
Adds a through route for the FDC interrupt line.
2019-10-28 21:13:21 -04:00
Thomas Harte
d44734d105
Attempts a fuller setting of GPIP inputs.
2019-10-27 22:39:21 -04:00
Thomas Harte
1aaa6331a0
Stores and returns video mode.
2019-10-27 22:39:00 -04:00
Thomas Harte
0cb19421e8
Adds prefix to mouse position response.
2019-10-27 21:46:03 -04:00
Thomas Harte
92847037b3
Merge branch 'master' into AtariST
2019-10-27 21:40:51 -04:00
Thomas Harte
0fc191c87d
Switched a few static_cast
to constructor syntax.
2019-10-27 14:21:22 -04:00
Thomas Harte
dc4a0e4e3b
Video only ever reads from RAM, so it can be const *.
...
(it can also be *const, since I set it only once)
2019-10-27 14:09:38 -04:00
Thomas Harte
36a9a5288b
Adds drives to the FDC.
2019-10-26 22:39:11 -04:00
Thomas Harte
ac39fd0235
Starts work on the DMA controller.
2019-10-26 21:33:57 -04:00
Thomas Harte
ecc0cea5a1
Added a potential branch for the newer TOS memory map.
2019-10-26 16:52:06 -04:00
Thomas Harte
eae11cbf17
Adds a dummy response for mouse interrogation.
2019-10-26 16:14:24 -04:00
Thomas Harte
2207638287
Adds hsync and vsync interrupts.
2019-10-25 22:42:13 -04:00
Thomas Harte
872897029e
Attempts a complete wiring of 68901 interrupts.
2019-10-25 22:36:01 -04:00
Thomas Harte
51b4b5551d
Actually, I think the 6850 is active low for interrupts.
2019-10-24 22:37:53 -04:00
Thomas Harte
092a61f93e
Does a better job of having just 512kb.
2019-10-21 23:10:30 -04:00
Thomas Harte
e30ba58e0d
Attempts to wire ACIA interrupt signals into the MFP.
2019-10-21 23:02:30 -04:00
Thomas Harte
83d73fb088
The keyboard now responds to a reset on its serial line.
2019-10-20 23:13:44 -04:00
Thomas Harte
75c3e2dacd
Adds basic, incomplete dispatcher for the intelligent keyboard.
2019-10-20 23:07:19 -04:00
Thomas Harte
cf07982a9b
Ensures good serial line and ACIA behaviour.
...
Next stop: having the intelligent keyboard react.
2019-10-20 22:10:05 -04:00
Thomas Harte
313aaa8f95
Silences temporarily.
2019-10-20 20:38:56 -04:00
Thomas Harte
696af5c3a6
Starts to transfer serial line decoding logic into the line itself.
2019-10-20 20:38:56 -04:00
Thomas Harte
9a8352282d
Mostly but not quite fixes serial work.
2019-10-20 20:38:55 -04:00
Thomas Harte
34075a7674
Attempts to tie an intelligent keyboard to the other end of its serial line.
2019-10-20 20:38:55 -04:00
Thomas Harte
ff62eb6dce
The ACIA actually has two clocks, though on an ST they're both 500,000 Hz.
2019-10-20 20:38:55 -04:00
Thomas Harte
374439693e
Ensures serial lines know their writer's clock rate.
2019-10-20 20:38:55 -04:00
Thomas Harte
c4ef33b23f
JustInTimeActors can now specify a clock divider.
2019-10-20 20:38:55 -04:00
Thomas Harte
4e5b440145
Attempts mostly to implement 6850 output.
2019-10-20 20:38:55 -04:00
Thomas Harte
97d44129cb
Ensures all 16 data lines reach the video.
2019-10-20 20:38:55 -04:00
Thomas Harte
b0f5f7bd37
Attempts to start producing actual video.
2019-10-20 20:38:55 -04:00
Thomas Harte
a59ec9e818
Provides a token something where DMA should be.
2019-10-20 20:38:55 -04:00
Thomas Harte
4ead905c3c
Adds an empty shell for the ACIA.
2019-10-20 20:38:55 -04:00
Thomas Harte
127bb043e7
Adds enough logic to advance to an ACIA access error.
2019-10-20 20:38:55 -04:00
Thomas Harte
42ebe06474
Makes an attempt at tracking video sequence points.
2019-10-20 20:38:55 -04:00
Thomas Harte
74fe32da23
Takes a shot at other display outputs.
2019-10-20 20:38:55 -04:00
Thomas Harte
780916551f
Corrects sync generation.
2019-10-20 20:38:54 -04:00
Thomas Harte
305b1211ba
Makes a first attempt to box out the ST display area.
2019-10-20 20:38:54 -04:00
Thomas Harte
2cf52fb89c
Makes an unsuccessful first attempt at some timer functionality.
2019-10-20 20:38:54 -04:00
Thomas Harte
6e1b606adf
Adds a target for MFP read/write operations.
...
Completely without any implementation, so far.
2019-10-20 20:38:54 -04:00
Thomas Harte
3bb0bf9e14
Adds some semblance of an AY.
2019-10-20 20:38:54 -04:00
Thomas Harte
87a6d22894
Starts to formalise the ST memory map a little.
2019-10-20 20:38:54 -04:00
Thomas Harte
484a0ceeb8
Starts forming an Atari ST memory map.
2019-10-20 20:38:54 -04:00
Thomas Harte
da1436abd2
Gifts the Atari ST a 68000 and non-functional video.
2019-10-20 20:38:54 -04:00
Thomas Harte
125f781ced
Starts to create an actual shell of a machine.
2019-10-20 20:38:54 -04:00
Thomas Harte
8b397626bf
Adds a route through the static analyser to the Atari ST.
2019-10-20 20:38:54 -04:00
Thomas Harte
0da1881a07
Adds an Atari ST enumeration and factory method.
2019-10-20 20:38:54 -04:00
Thomas Harte
95c45b5515
This can be const.
2019-10-20 17:22:56 -04:00
Thomas Harte
735586f5f8
Corrects tabs; adds potential output_border optimisation.
2019-10-19 21:20:34 -04:00
Thomas Harte
3c146a3fb2
Adds missing Master System enumerations.
2019-09-30 21:10:30 -04:00
Thomas Harte
4ac3839185
Seeks to ensure that card transitions between real-time and just-in-time don't break timing.
2019-09-28 18:34:04 -04:00
Thomas Harte
fbf95ec2b8
Removes the now empty local namespace.
2019-09-24 22:48:47 -04:00
Thomas Harte
077c7d767f
Shifts essential modifiers up to the Keyboard class.
...
I had forgotten that mappers are not exposed.
2019-09-22 13:48:50 -04:00
Thomas Harte
a416bc0058
Adds an interface allowing keyboard mappers to declare modifiers that are 'essential'.
...
i.e. ones that, if not delivered reliably, will cause the related machine to behave unexpectedly.
2019-09-22 13:14:09 -04:00
Thomas Harte
5f16fa8c08
Removes dead reference to video from VIAPortHandler.
2019-09-21 17:39:45 -04:00
Thomas Harte
e7bf0799b6
Implements every-other-cycle-during-pixels RAM timing.
2019-09-21 17:25:20 -04:00
Thomas Harte
2e24da4614
Implements quick booting, and edges towards exposing it on the Mac.
...
It should already work in kiosk mode.
2019-09-19 22:32:12 -04:00
Thomas Harte
e46601872b
Establishes that the Macintosh offers the quick-boot option.
2019-09-19 21:50:39 -04:00
Thomas Harte
776b819a5a
Adds the SCSI bus as an Activity::Source.
2019-09-19 19:31:22 -04:00
Thomas Harte
962275c22a
Removes clock for NCR 5380.
...
It doesn't have one in real life, and now can live off the time counting that occurs on the SCSI bus.
2019-09-18 20:17:47 -04:00
Thomas Harte
243e40cd79
Adds signalling of DACK.
2019-09-14 13:48:33 -04:00
Thomas Harte
1c7e0f3c9d
Fixes control line modification by the 5380 and SCSI target command chaining.
...
So now I'm back to trying to guess how a SCSI command terminates re: the relative meanings of a message phase and a status phase.
2019-09-02 23:14:37 -04:00
Thomas Harte
318cdb41ea
Adds SCSI bus clocking to the Macintosh, and fixes its internal counting.
2019-09-02 16:03:33 -04:00
Thomas Harte
2f8e31bc8b
Takes a first bash at implementing the new SCSI::Bus timing infrastructure.
2019-09-02 13:00:01 -04:00
Thomas Harte
1a60ced61b
Starts trying to deal with creating a whole volume from merely a partition.
2019-08-25 23:03:54 -04:00
Thomas Harte
ca08716c52
Introduces real hard disk images to the nascent world of SCSI.
2019-08-25 17:03:41 -04:00
Thomas Harte
90cf99b626
Takes a wild swings at speeding up startup.
...
With no success.
2019-08-18 22:40:16 -04:00
Thomas Harte
f668e4a54c
Makes an attempt at getting the 5380 past arbitration.
...
Not entirely successful. Also gets a bit smarter with `final` on ClockingHint::Sources.
2019-08-15 23:14:40 -04:00
Thomas Harte
0f67e490e8
Adjusts NCR address decoding to produce a more plausible initial interaction.
2019-08-11 22:43:25 -04:00
Thomas Harte
895c315fa5
Increases the Mac Plus too 4mb.
2019-08-11 21:41:12 -04:00
Thomas Harte
a90a74a512
Stubs in just enough of the 5380 to get a Mac Plus too boot.
2019-08-11 20:55:20 -04:00
Thomas Harte
bbd4e4d3dc
Enhances memory map fidelity to allow for ROM holes on the Mac Plus.
...
This is how the ROM detects the difference between the Plus and the 512ke, it seems.
2019-08-10 23:53:34 -04:00
Thomas Harte
bac0461f7f
Switches the drive-speed accumulator to the delegate pattern.
...
This allows the Macintosh to ensure that the IWM is kept up just-in-time with drive speed changes.
2019-08-07 21:39:23 -04:00
Thomas Harte
f26a200d78
Switches to a JustInTimeActor to wrap the IWM.
...
Also simplifies potential future usage of the IWM template.
2019-08-07 21:28:02 -04:00
Thomas Harte
0e293e4983
Relocates RAM delay test in order to scrape out a minor performance win.
2019-08-03 21:46:45 -04:00
Thomas Harte
478f2533b5
Corrects 68000 address bus during interrupt acknowledge.
...
All unused bits should be 1, not 0.
2019-08-03 15:38:36 -04:00
Thomas Harte
a07488cf1b
Introduces the Mac Plus memory map.
...
Albeit with no SCSI support yet.
2019-08-02 22:26:40 -04:00
Thomas Harte
d67c5145c0
Introduces RAM access delays.
2019-08-02 22:12:34 -04:00
Thomas Harte
5e76d593af
Switches to table-based address decoding.
2019-08-02 21:30:04 -04:00
Thomas Harte
b93f9b3973
Distinguishes time advancement from bus response.
2019-08-02 19:48:41 -04:00
Thomas Harte
96005261c7
Adds activity lights for Macintosh disk activity.
...
Prompting a quick fix to drives not spinning down.
2019-08-02 16:26:23 -04:00
Thomas Harte
c8177af45a
Introduces missing implementation file.
2019-08-02 16:26:08 -04:00
Thomas Harte
97eff5b16d
Formally distinguishes Macintosh keys from virtual keys.
...
Also: adds mappings for keypad keys, and corrects a couple of
long-standing capitalisation errors in my virtual key set.
2019-08-02 16:15:34 -04:00
Thomas Harte
9bbccd89d3
Adds an extended rationale for current implementation.
...
Also strips some cruft of prior guesses.
2019-07-31 23:19:46 -04:00
Thomas Harte
260843e5b1
Starts poking at a pure total-based formula.
...
On the assumption that any relevant DC offset will fall out in the wash. This causes one 400kb disk to boot in a Macintosh 128kb, another couple to do reasonably well. So it's better than what was here before.
2019-07-31 12:42:23 -04:00
Thomas Harte
e3f22e5787
This should actually be PWM, I think.
...
I'm just unsure of exactly the proper formula, owing to my ignorance on basic electrical engineering. Research ahoy!
2019-07-30 22:02:41 -04:00
Thomas Harte
2aa308efdd
Tweaks magic formulas.
...
The computer now at least seeks outward, until this attempt at drive speed calculation fails.
2019-07-30 16:18:36 -04:00
Thomas Harte
74c18d7861
Attempts a full wiring up of 400kb drive speed.
2019-07-30 15:08:55 -04:00
Thomas Harte
f3dd4b028d
Rolls out JustInTime acting to the MSX and ColecoVision.
2019-07-29 21:22:31 -04:00
Thomas Harte
9859f99513
Adds a route to not bumping time.
2019-07-29 17:21:27 -04:00
Thomas Harte
a43ada82b2
Experiments with a JustInTimeActor in the Master System.
2019-07-29 15:38:41 -04:00
Thomas Harte
5149f290d0
Starts trying to formalise just-in-time execution.
...
Which, at least, simplifies Cycle/HalfCycle to Cycle run_for usage via template.
2019-07-28 21:49:54 -04:00
Thomas Harte
f894d43111
Removes the video and audio base address latches.
...
It now seems to me that these take effect immediately.
2019-07-27 22:23:40 -04:00
Thomas Harte
d8bc20b1ab
Ensures quieter Release behaviour.
2019-07-25 22:55:27 -04:00
Thomas Harte
109d5d16bd
Withdraws optimisation, for further testing in the future.
2019-07-25 10:33:38 -04:00
Thomas Harte
1672dc5946
Reduces frequency of update_video()
calls.
2019-07-25 10:14:52 -04:00
Thomas Harte
0469f0240b
Moves interrupt level selection outside the loop.
2019-07-23 23:13:03 -04:00
Thomas Harte
fcee7779b0
Inserts missing spaces.
2019-07-22 23:11:37 -04:00
Thomas Harte
b4191b6225
Corrects DiskII boot ROM CRCs and improves corresponding declarations.
2019-07-22 23:07:23 -04:00
Thomas Harte
dbee37ab34
Provides extended ROM details for the VIC-20 and Oric.
2019-07-22 22:15:44 -04:00
Thomas Harte
2432151bf8
Puts machine name into ROMMachine::ROM.
...
Also switches to idiomatic exit codes.
2019-07-22 21:14:21 -04:00
Thomas Harte
b2a6682798
Adds extended ROM information for the ZX80 and '81.
2019-07-20 22:46:49 -04:00
Thomas Harte
f3aac603f8
Adds extended Introduces extended ROM details for the C1540, Electron, Master System and MSX.
2019-07-20 21:30:37 -04:00
Thomas Harte
712cb473f7
Adds extended ROM information for the CPC and ColecoVision.
2019-07-20 17:07:59 -04:00
Thomas Harte
3c68a5ca65
Enhances the amount of ROM information posted by the Apple machines.
2019-07-20 16:08:40 -04:00
Thomas Harte
20670bab2f
Expands information included in ROM load requests.
2019-07-19 22:35:22 -04:00
Thomas Harte
b9a34bee51
Substitutes a more efficient inner loop for audio generation.
2019-07-17 14:54:06 -04:00
Thomas Harte
22ee51c12c
Corrects clocking issues around audio, and cuts down queue costs.
2019-07-17 14:41:36 -04:00
Thomas Harte
59b5dfddec
Added logic to allow a second disk to be inserted, at least.
2019-07-11 23:03:02 -04:00
Thomas Harte
cac97a9663
Devolves drive responsibility.
2019-07-10 22:39:56 -04:00
Thomas Harte
2ccb564a7b
Throws some extra logging into place, to test the IWM changeover.
2019-07-10 21:39:45 -04:00
Thomas Harte
d1d0430fce
Eliminates the SonyDrive class.
2019-07-10 17:38:05 -04:00
Thomas Harte
be251d6b03
Begins substituting the DoubleDensityDrive for the Sony.
2019-07-10 16:24:48 -04:00
Thomas Harte
c4ab0bb867
Starts sketching out an interface for IWM drives, eliminating a dangling use of unsigned
as it goes.
2019-07-10 16:05:59 -04:00
Thomas Harte
886946cc8c
Rejigs time-until-event tracking.
2019-07-09 23:27:27 -04:00
Thomas Harte
ed4ddcfda8
Reduces call/return overhead on Microcycle methods.
2019-07-09 19:55:30 -04:00
Thomas Harte
7886cd63bd
Flattens the Macintosh's perform_bus_operation, for legibility.
2019-07-09 19:49:06 -04:00
Thomas Harte
b4a3f66773
Restores just-in-time processing of video.
2019-07-09 18:08:07 -04:00
Thomas Harte
52e96e3d2a
Documents and extends the Video
interface.
...
With the intention of returning it soon to JIT execution.
2019-07-08 22:28:05 -04:00
Thomas Harte
1a9aa60bf7
Ensures no compiler will think this can exit without returning.
2019-07-08 18:13:23 -04:00
Thomas Harte
793c2df7ee
Fixes keypad keys.
2019-07-08 16:38:06 -04:00
Thomas Harte
28de629c08
Fixes the 6522 sufficiently to fix keyboard input.
2019-07-08 15:29:34 -04:00
Thomas Harte
d7329c1bdd
Experiments with a timeout on keyboard interactions.
2019-07-07 14:13:55 -04:00
Thomas Harte
96c0253ee2
Fixes mouse input when a button is pressed; attempts keyboard input.
...
I think the VIA is somehow sending spurious commands.
2019-07-02 21:14:33 -04:00
Thomas Harte
191a7a9386
Reintroduces an empty second drive.
...
This prevents the uninitialised disk error. Which is a clue.
2019-07-02 16:59:00 -04:00
Thomas Harte
fffe6ed2df
Chops the Macintosh down to a single drive to aid in development.
2019-07-02 13:59:30 -04:00
Thomas Harte
6c588a1510
Makes some further random swings at tracking the startup procedure.
2019-06-28 13:03:47 -04:00
Thomas Harte
d81053ea38
Invents some additional PEA tests, and further fixes PEA.
2019-06-27 17:59:03 -04:00
Thomas Harte
506276a2bd
Corrected: use format tag as intended.
2019-06-18 14:04:28 -04:00
Thomas Harte
00c32e4b59
Further miscellaneous changes to debug logging. All temporary.
2019-06-18 10:34:31 -04:00
Thomas Harte
877b46d2c1
Advances IWM/drive emulation very close to the point of 'Welcome to Macintosh'.
2019-06-15 16:08:54 -04:00
Thomas Harte
bde975a3b9
Possibly mights the tiniest bit of headway with 'the IWM'.
...
I'm now pretty sure that my 3.5" drive, which for now is implemented in the IWM (yuck) is just responding to queries incorrectly.
2019-06-13 22:38:09 -04:00