Thomas Harte
c755411636
Slightly improves comments.
2020-01-19 20:05:22 -05:00
Thomas Harte
d674fd0e67
The WD uses only the low two bits for sector size.
2020-01-18 13:40:50 -05:00
Thomas Harte
aac3d27c10
Adds activity indicators for the BD-500 and Jasmin.
...
Also slightly cleans up DiskController a little further.
2020-01-15 23:39:15 -05:00
Thomas Harte
2d233b6358
Makes a more concrete attempt at track/sector combination.
2020-01-12 22:18:31 -05:00
Thomas Harte
6a44936a7c
Ensures programmatic volume level 0 is completely off.
2020-01-05 22:44:52 -05:00
Thomas Harte
c1bae49a92
Standardises on read
and write
for bus accesses.
...
Logic being: name these things for the bus action they model, not the effect they have.
2020-01-05 13:40:02 -05:00
Thomas Harte
153f60735d
Banishes redefined macro warning.
2020-01-01 12:38:30 -05:00
Thomas Harte
e59de71d79
Disables status logging, at least until next needed.
2019-12-24 21:44:50 -05:00
Thomas Harte
4205e95883
Switches to capture of the track 0 flag during a type 1 operation.
2019-12-24 21:43:20 -05:00
Thomas Harte
dfa6b11737
Adds responsibility for an ongoing index pulse to the drive.
2019-12-24 20:53:37 -05:00
Thomas Harte
42926e72cc
Adjusted: Flag::WriteProtect works in real time for a type-1 status.
2019-12-24 19:57:12 -05:00
Thomas Harte
80cb06eb33
It provisionally seems as though spin_up should be reset by a force interrupt?
2019-12-24 19:37:37 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
ac604b30f3
Eliminates dangling static_cast
s in favour of construction.
2019-12-22 20:59:20 -05:00
Thomas Harte
b035b92f33
Corrects accidental use of sector contents as addresses in multi-sector reads and writes.
...
As a secondary defect, this was also causing erroneous CRC error reports.
2019-12-22 19:58:02 -05:00
Thomas Harte
d25b48878c
Cleans up READ_ID macro, inter alia.
2019-12-22 17:58:33 -05:00
Thomas Harte
274867579b
Deploys constexpr
as a stricter const
.
2019-12-22 00:22:17 -05:00
Thomas Harte
a847654ef2
Corrects various old-fashioned bits of indentation, plus the odd const.
2019-12-22 00:00:23 -05:00
Thomas Harte
57ce10418f
Switches prescale logic, the better to deal with changes in prescaler.
...
According to my assumptions about the behaviour, anyway.
2019-12-20 23:33:14 -05:00
Thomas Harte
2a1520c04e
Removes mostly-uninformative piece of logging.
2019-12-19 22:58:28 -05:00
Thomas Harte
45a391d69e
Increases quantity of annotations.
...
I'm now at almost 500 lines, and I haven't even really written anything yet.
2019-12-18 22:57:12 -05:00
Thomas Harte
15bc18b64f
Merge branch 'master' into FurtherSCC
2019-12-18 22:17:10 -05:00
Thomas Harte
206ab380c7
Introduces double-resolution envelopes for the Atari ST.
2019-12-18 22:03:02 -05:00
Thomas Harte
d85ae21b2f
Adds an explicit declaration of chip type to all AY users.
2019-12-18 19:28:41 -05:00
Thomas Harte
7d9bedf7de
Merge branch 'master' into FurtherSCC
2019-12-17 22:39:39 -05:00
Thomas Harte
c2646a415f
Switch to faster timer implementation; it seems to work.
2019-12-09 19:23:08 -05:00
Thomas Harte
7cd11ecb7f
Adds necessary #include for assert
.
2019-12-08 22:43:39 -05:00
Thomas Harte
acfe2c63b8
Adds an assert to verify the interrupt line is clear after a full reset.
2019-12-08 22:34:19 -05:00
Thomas Harte
b192381928
Implements a fuller reset, takes a run at the overran flag.
2019-12-08 21:20:06 -05:00
Thomas Harte
7ff57f8cdf
Starts to flesh out documentation.
2019-11-19 22:32:07 -05:00
Thomas Harte
06edeea866
Adds reload during event count mode.
...
Plus a helpful bit of TODO.
2019-11-19 22:24:32 -05:00
Thomas Harte
e0ceab6642
Pivots towards looking at Timer B as a cause of in-frame inaccuracy.
2019-11-19 21:52:50 -05:00
Thomas Harte
0ce5057fd9
Attempts to factor in event counting direction.
2019-11-18 22:37:20 -05:00
Thomas Harte
6ec3c47cc0
Ensures same-level interrupts don't double trigger.
2019-11-12 22:18:13 -05:00
Thomas Harte
d6edfa5c6d
Removes the redundant state encased within interrupt_causes_.
2019-11-11 21:49:02 -05:00
Thomas Harte
072b0266af
It seems status reads are not required to clear the interrupt line.
2019-11-09 20:12:09 -05:00
Thomas Harte
5fc4e57db7
Eliminates non-portable use of fls
.
2019-11-09 16:03:00 -05:00
Thomas Harte
e3abbc9966
Renames what didn't end up being a whole SerialPort.
2019-11-09 15:21:51 -05:00
Thomas Harte
8c736a639a
Eliminates unexpected bottleneck created by ACIA.
2019-11-09 15:00:12 -05:00
Thomas Harte
14e790746b
Fixes return value when reading received data.
2019-11-02 21:25:00 -04:00
Thomas Harte
75e34b4215
Reacts to no acknowledgement.
2019-10-31 21:00:05 -04:00
Thomas Harte
a5bbf54a27
Adds the ability for the 68901 to decline an interrupt acknowledgement.
2019-10-31 19:57:36 -04:00
Thomas Harte
731dc350b4
Adds sometime real-time clocking for DMA.
2019-10-30 22:59:32 -04:00
Thomas Harte
635e18a50d
Ensures the MFP requests and receives real-time clocking when needed.
2019-10-30 22:42:06 -04:00
Thomas Harte
4857ceb3eb
Attempts to get a bit more systematic.
...
Spotted that interrupt_enable_ isn't being used properly while doing so, hopefully that's now correct.
2019-10-29 23:16:08 -04:00
Thomas Harte
1c154131f9
Expands size of storage in Cycles/HalfCycles; adjusts widely to compensate.
2019-10-29 22:36:29 -04:00
Thomas Harte
fd02b6fc18
Corrects in-service test; adds pending clearing upon enabled clearing.
2019-10-28 22:51:00 -04:00
Thomas Harte
553f3b6d8b
Properly conforms to GPIP input/output blending.
2019-10-28 22:37:11 -04:00
Thomas Harte
a5057e6540
Ensures that stop means stop.
2019-10-28 22:12:45 -04:00
Thomas Harte
aa52652027
Adds a const.
2019-10-28 21:21:35 -04:00
Thomas Harte
5f6711b72c
Ensures interrupt changes are notified to the delegate.
2019-10-28 21:13:06 -04:00
Thomas Harte
de1bfb4e24
Stores and returns timer configuration.
2019-10-27 22:38:49 -04:00
Thomas Harte
0082dc4411
Improves logging.
2019-10-27 00:02:55 -04:00
Thomas Harte
22754683f8
Ensures timer divisor values don't go out of range, adds timer interrupts.
...
I suspect further timer issues remain.
2019-10-26 23:20:13 -04:00
Thomas Harte
e89be6249d
Adds a logging prefix.
2019-10-26 22:38:56 -04:00
Thomas Harte
e96386f572
Takes another stab at MFP interrupt management.
2019-10-26 15:55:19 -04:00
Thomas Harte
a8d481a764
Writes to the pending register appear to be able to clear interrupts too.
2019-10-25 22:46:30 -04:00
Thomas Harte
872897029e
Attempts a complete wiring of 68901 interrupts.
2019-10-25 22:36:01 -04:00
Thomas Harte
7a2de47f58
Corrects interrupt mask generation.
2019-10-24 22:37:32 -04:00
Thomas Harte
f2f98ed60c
Attempts some part of interrupt decision making.
2019-10-24 22:33:42 -04:00
Thomas Harte
77f14fa638
Starts trying to make sense of interrupts.
2019-10-23 23:09:49 -04:00
Thomas Harte
f09a240e6c
Gives myself more trace details.
2019-10-21 23:20:03 -04:00
Thomas Harte
e30ba58e0d
Attempts to wire ACIA interrupt signals into the MFP.
2019-10-21 23:02:30 -04:00
Thomas Harte
7cb82fccc0
Attempts properly to maintain interrupt flag; adds delegate.
2019-10-21 22:40:38 -04:00
Thomas Harte
ed9a5b0430
Adds receipt interrupt.
2019-10-21 21:27:57 -04:00
Thomas Harte
8f59a73425
Corrects incoming data capture.
2019-10-21 20:18:52 -04:00
Thomas Harte
91223b9ec8
Sets default level to high.
2019-10-21 20:18:33 -04:00
Thomas Harte
83f5f0e2ad
Begins trying to receive ACIA data.
2019-10-21 20:10:19 -04:00
Thomas Harte
cf37e9f5de
Remove source control markers.
2019-10-20 23:40:51 -04:00
Thomas Harte
e4f7ead894
Merge branch 'AtariST' of github.com:TomHarte/CLK into AtariST
2019-10-20 23:40:01 -04:00
Thomas Harte
4134463094
The ACIA now receives bits.
2019-10-20 23:34:30 -04:00
Thomas Harte
83d73fb088
The keyboard now responds to a reset on its serial line.
2019-10-20 23:13:44 -04:00
Thomas Harte
cf07982a9b
Ensures good serial line and ACIA behaviour.
...
Next stop: having the intelligent keyboard react.
2019-10-20 22:10:05 -04:00
Thomas Harte
2e86dada1d
Ensures updates even when the event queue is empty.
2019-10-20 20:38:56 -04:00
Thomas Harte
696af5c3a6
Starts to transfer serial line decoding logic into the line itself.
2019-10-20 20:38:56 -04:00
Thomas Harte
f08b38d0ae
Silences, temporarily.
2019-10-20 20:38:55 -04:00
Thomas Harte
9a8352282d
Mostly but not quite fixes serial work.
2019-10-20 20:38:55 -04:00
Thomas Harte
3d03cce6b1
Starts working on the GPIP functionality block.
2019-10-20 20:38:55 -04:00
Thomas Harte
34075a7674
Attempts to tie an intelligent keyboard to the other end of its serial line.
2019-10-20 20:38:55 -04:00
Thomas Harte
f79c87659f
Corrects documentation error.
2019-10-20 20:38:55 -04:00
Thomas Harte
c10b64e1c0
Adds a received_data_ register, that presently can never fill.
2019-10-20 20:38:55 -04:00
Thomas Harte
5d5fe52144
Corrects transmission logic — exactly hitting write_data_time_remaining now works properly.
2019-10-20 20:38:55 -04:00
Thomas Harte
d461331fd2
Ensures remaining_delays_
is set properly after [reset/flush]_writing.
2019-10-20 20:38:55 -04:00
Thomas Harte
ff62eb6dce
The ACIA actually has two clocks, though on an ST they're both 500,000 Hz.
2019-10-20 20:38:55 -04:00
Thomas Harte
374439693e
Ensures serial lines know their writer's clock rate.
2019-10-20 20:38:55 -04:00
Thomas Harte
c4ef33b23f
JustInTimeActors can now specify a clock divider.
2019-10-20 20:38:55 -04:00
Thomas Harte
a7ed357569
Attempts to implement transmission interrupts and ClockingHint::Source.
2019-10-20 20:38:55 -04:00
Thomas Harte
4e5b440145
Attempts mostly to implement 6850 output.
2019-10-20 20:38:55 -04:00
Thomas Harte
2bd7be13b5
Decodes the 6850 control register, and starts working on standardised serial ports.
2019-10-20 20:38:55 -04:00
Thomas Harte
4b09d7c41d
Nudges 6850 towards coherence.
2019-10-20 20:38:55 -04:00
Thomas Harte
b0f5f7bd37
Attempts to start producing actual video.
2019-10-20 20:38:55 -04:00
Thomas Harte
4ead905c3c
Adds an empty shell for the ACIA.
2019-10-20 20:38:55 -04:00
Thomas Harte
127bb043e7
Adds enough logic to advance to an ACIA access error.
2019-10-20 20:38:55 -04:00
Thomas Harte
2cf52fb89c
Makes an unsuccessful first attempt at some timer functionality.
2019-10-20 20:38:54 -04:00
Thomas Harte
6e1b606adf
Adds a target for MFP read/write operations.
...
Completely without any implementation, so far.
2019-10-20 20:38:54 -04:00
Thomas Harte
e095a622d3
Ensures updates even when the event queue is empty.
2019-10-17 23:59:43 -04:00
Thomas Harte
9ab49065cd
Starts to transfer serial line decoding logic into the line itself.
2019-10-17 23:34:39 -04:00
Thomas Harte
ab50f17d87
Silences, temporarily.
2019-10-16 23:34:49 -04:00
Thomas Harte
f5a2e180f9
Mostly but not quite fixes serial work.
2019-10-16 23:34:37 -04:00
Thomas Harte
f2e1584275
Starts working on the GPIP functionality block.
2019-10-16 23:21:25 -04:00
Thomas Harte
0fd8813ddb
Attempts to tie an intelligent keyboard to the other end of its serial line.
2019-10-16 23:21:14 -04:00
Thomas Harte
b69180ba01
Corrects documentation error.
2019-10-16 23:19:42 -04:00
Thomas Harte
c352d8ae8c
Adds a received_data_ register, that presently can never fill.
2019-10-13 23:04:57 -04:00
Thomas Harte
530e831064
Corrects transmission logic — exactly hitting write_data_time_remaining now works properly.
2019-10-13 21:40:46 -04:00
Thomas Harte
3b165a78f2
Ensures remaining_delays_
is set properly after [reset/flush]_writing.
2019-10-13 21:39:25 -04:00
Thomas Harte
8d87e9eb1c
The ACIA actually has two clocks, though on an ST they're both 500,000 Hz.
2019-10-13 21:32:34 -04:00
Thomas Harte
f86dc082bb
Ensures serial lines know their writer's clock rate.
2019-10-13 20:41:08 -04:00
Thomas Harte
d7982aa84e
JustInTimeActors can now specify a clock divider.
2019-10-13 18:19:39 -04:00
Thomas Harte
516d78f5a8
Attempts to implement transmission interrupts and ClockingHint::Source.
2019-10-12 23:46:57 -04:00
Thomas Harte
8b50a7d6e3
Attempts mostly to implement 6850 output.
2019-10-12 23:14:29 -04:00
Thomas Harte
4bf81d3b90
Decodes the 6850 control register, and starts working on standardised serial ports.
2019-10-12 18:19:55 -04:00
Thomas Harte
cd75978e4e
Nudges 6850 towards coherence.
2019-10-12 00:04:02 -04:00
Thomas Harte
c5ebf75351
Attempts to start producing actual video.
2019-10-10 22:46:58 -04:00
Thomas Harte
d7ce2c26e8
Adds an empty shell for the ACIA.
2019-10-10 20:54:29 -04:00
Thomas Harte
f88e1b1373
Adds enough logic to advance to an ACIA access error.
2019-10-09 23:01:11 -04:00
Thomas Harte
1de1818ebb
Makes an unsuccessful first attempt at some timer functionality.
2019-10-07 22:44:35 -04:00
Thomas Harte
885f890df1
Adds a target for MFP read/write operations.
...
Completely without any implementation, so far.
2019-10-06 23:14:05 -04:00
Thomas Harte
6c99048211
Copies in a few more hardware notes.
2019-10-02 19:18:09 -04:00
Thomas Harte
2638a901d9
Improves documentation of existing degree of implementation.
2019-09-30 21:36:37 -04:00
Thomas Harte
929475d31e
Minor correction: round down, not up.
2019-09-28 23:49:32 -04:00
Thomas Harte
7758f9d0a9
Improves nomenclature.
2019-09-24 22:31:36 -04:00
Thomas Harte
8d4a96683a
Reduces output noise.
2019-09-18 21:41:29 -04:00
Thomas Harte
f53411a319
Removes local NDEBUG.
2019-09-18 21:35:26 -04:00
Thomas Harte
962275c22a
Removes clock for NCR 5380.
...
It doesn't have one in real life, and now can live off the time counting that occurs on the SCSI bus.
2019-09-18 20:17:47 -04:00
Thomas Harte
2f6c366668
Makes a concerted effort at properly wrapping a hard disk image.
2019-09-17 21:30:04 -04:00
Thomas Harte
2ce1f0a3b1
Implements multi-sector read/write.
...
This once again unblocks Apple HD SC Setup. Progress!
2019-09-16 22:20:42 -04:00
Thomas Harte
960b289e70
Edges closer towards proper DMA operation.
...
Specifically: differentiates the three kinds of DMA operation. Still doesn't act correctly with regard to DACK though, and leaves the bus instantaneously improperly formed. Which I'm tempted to try to fix on the target side by properly obeying delays.
2019-09-15 15:03:06 -04:00
Thomas Harte
243e40cd79
Adds signalling of DACK.
2019-09-14 13:48:33 -04:00
Thomas Harte
64dad35026
Decreases logging, at least temporarily.
2019-09-03 22:40:32 -04:00
Thomas Harte
1c7e0f3c9d
Fixes control line modification by the 5380 and SCSI target command chaining.
...
So now I'm back to trying to guess how a SCSI command terminates re: the relative meanings of a message phase and a status phase.
2019-09-02 23:14:37 -04:00
Thomas Harte
ca08716c52
Introduces real hard disk images to the nascent world of SCSI.
2019-08-25 17:03:41 -04:00
Thomas Harte
c86db12f1c
Starts implementing DMA support on the 5380.
...
The Macintosh doesn't actually use the DMA signals, but uses pseudo-DMA mode so they nevertheless need to be appropriate.
2019-08-24 22:47:11 -04:00
Thomas Harte
2d82855f26
Attempts to provide a data out phase.
2019-08-22 23:16:58 -04:00
Thomas Harte
faec516a2c
Starts pushing towards figuring out a proper infrastructure for mass storage.
2019-08-21 23:22:58 -04:00
Thomas Harte
bb1a0a0b76
Sketches out further SCSI infrastructure.
2019-08-21 22:37:39 -04:00
Thomas Harte
252650808d
Starts seeking to unbind SCSI bus logic and command performance.
2019-08-19 22:47:01 -04:00
Thomas Harte
e3d9254555
Implements phase-match bit.
...
Seemingly causing the command phase to proceed.
2019-08-18 23:15:54 -04:00
Thomas Harte
955e909e61
Attempts to nudge the command phase further towards functioning.
2019-08-18 22:39:27 -04:00
Thomas Harte
8339e2044c
Switches to proper SCSI terminology and better attempts a command phase.
2019-08-18 15:10:07 -04:00
Thomas Harte
0e0c789b02
Starts attempting to introduce a direct access device.
...
Without having access to the SCSI-1 standard, a lot of this is guesswork.
2019-08-17 23:43:42 -04:00
Thomas Harte
7e001c1d03
Corrects data line loading.
...
Also adds some extra temporary logging. Outstanding question: why is ATN not being signalled? Is SEL enough?
2019-08-17 21:30:59 -04:00
Thomas Harte
9047932b81
Corrected basic error. Arbitration now seems to succeed.
...
This is seemingly followed by a pattern of signalling BUSY+SEL followed by just SEL with the various other potential device IDs in turn. To which nothing ever responds as currently implemented.
2019-08-15 23:28:30 -04:00
Thomas Harte
f668e4a54c
Makes an attempt at getting the 5380 past arbitration.
...
Not entirely successful. Also gets a bit smarter with `final` on ClockingHint::Sources.
2019-08-15 23:14:40 -04:00
Thomas Harte
ce1c96d68c
Starts thinking out the mechanics of emulating a SCSI-1 bus.
2019-08-13 23:09:11 -04:00
Thomas Harte
0f67e490e8
Adjusts NCR address decoding to produce a more plausible initial interaction.
2019-08-11 22:43:25 -04:00
Thomas Harte
a90a74a512
Stubs in just enough of the 5380 to get a Mac Plus too boot.
2019-08-11 20:55:20 -04:00
Thomas Harte
949c1e1668
Adds an empty shell for what will be my 5380 implementation.
2019-08-10 23:53:52 -04:00
Thomas Harte
96005261c7
Adds activity lights for Macintosh disk activity.
...
Prompting a quick fix to drives not spinning down.
2019-08-02 16:26:23 -04:00
Thomas Harte
335dda3d55
Attempts more accurately to match Apple's windowing logic.
2019-08-02 12:49:45 -04:00
Thomas Harte
9bbccd89d3
Adds an extended rationale for current implementation.
...
Also strips some cruft of prior guesses.
2019-07-31 23:19:46 -04:00
Thomas Harte
2aa308efdd
Tweaks magic formulas.
...
The computer now at least seeks outward, until this attempt at drive speed calculation fails.
2019-07-30 16:18:36 -04:00
Thomas Harte
74c18d7861
Attempts a full wiring up of 400kb drive speed.
2019-07-30 15:08:55 -04:00
Thomas Harte
a43ada82b2
Experiments with a JustInTimeActor in the Master System.
2019-07-29 15:38:41 -04:00
Thomas Harte
85cf8d89bc
Ensures an initial non-zero value.
2019-07-25 21:47:44 -04:00
Thomas Harte
0469f0240b
Moves interrupt level selection outside the loop.
2019-07-23 23:13:03 -04:00
Thomas Harte
d69aee4972
Removes stray \n.
2019-07-23 22:17:46 -04:00
Thomas Harte
ee8d853fcb
Ensures you can't get a phase 2 for free with run_for(0)
.
2019-07-17 14:20:27 -04:00
Thomas Harte
67055d8b56
Reduces CheckingWriteProtect
costs, negligibly.
2019-07-15 22:39:55 -04:00
Thomas Harte
7baad61746
Attempts a full implementation of asynchronous write mode.
2019-07-15 17:11:12 -04:00
Thomas Harte
1d1e0d74f8
Corrects and introduces new parts.
2019-07-12 21:37:33 -04:00
Thomas Harte
d53d1c616f
Continues trying to get to write support.
2019-07-12 21:20:05 -04:00
Thomas Harte
2c39229b13
Adds has-new-disk flag, allowing mounting of software from the desktop.
2019-07-12 13:17:24 -04:00
Thomas Harte
b730ac5d5a
Reintroduces 1-second disable implementation.
2019-07-11 23:02:47 -04:00
Thomas Harte
c8917e677b
Edging towards implementing IWM write support, but mainly tidied up.
2019-07-11 21:42:34 -04:00
Thomas Harte
cac97a9663
Devolves drive responsibility.
2019-07-10 22:39:56 -04:00
Thomas Harte
be251d6b03
Begins substituting the DoubleDensityDrive for the Sony.
2019-07-10 16:24:48 -04:00
Thomas Harte
6cfaf920ee
Added attribution and commentary on rotation speeds.
2019-07-10 16:22:06 -04:00
Thomas Harte
1657f8768c
Transfers and slightly extends drive logic into the drive.
2019-07-10 16:17:51 -04:00
Thomas Harte
c4ab0bb867
Starts sketching out an interface for IWM drives, eliminating a dangling use of unsigned
as it goes.
2019-07-10 16:05:59 -04:00
Thomas Harte
fb6da1de4a
Reduces logging temporarily.
2019-07-08 17:37:15 -04:00
Thomas Harte
245e27c893
Solidifies belief that the shift register bit is cleared on read/write.
2019-07-08 16:45:15 -04:00
Thomas Harte
28de629c08
Fixes the 6522 sufficiently to fix keyboard input.
2019-07-08 15:29:34 -04:00
Thomas Harte
210bcaa56d
Introduces an initial shift unit test, and makes it pass.
2019-07-07 22:13:36 -04:00
Thomas Harte
191a7a9386
Reintroduces an empty second drive.
...
This prevents the uninitialised disk error. Which is a clue.
2019-07-02 16:59:00 -04:00
Thomas Harte
b9c2c42bc0
Switches drives to using floats for time counting.
...
Hopefully to eliminate a lot of unnecessary `Time` work; inaccuracies should still be within tolerable range.
2019-07-02 15:43:03 -04:00
Thomas Harte
6c588a1510
Makes some further random swings at tracking the startup procedure.
2019-06-28 13:03:47 -04:00
Thomas Harte
00c32e4b59
Further miscellaneous changes to debug logging. All temporary.
2019-06-18 10:34:31 -04:00
Thomas Harte
877b46d2c1
Advances IWM/drive emulation very close to the point of 'Welcome to Macintosh'.
2019-06-15 16:08:54 -04:00
Thomas Harte
cc7226ae9f
Starts trying to get a bit more rigorous about collected meanings.
2019-06-13 22:48:10 -04:00
Thomas Harte
bde975a3b9
Possibly mights the tiniest bit of headway with 'the IWM'.
...
I'm now pretty sure that my 3.5" drive, which for now is implemented in the IWM (yuck) is just responding to queries incorrectly.
2019-06-13 22:38:09 -04:00
Thomas Harte
f6f9024631
Corrects Macintosh aspect ratio (and framing).
2019-06-13 18:41:38 -04:00
Thomas Harte
535747e3f2
Restores single-line logging format.
2019-06-13 13:35:03 -04:00
Thomas Harte
d6150645c0
By hook or by crook, mouse input now works.
2019-06-12 22:19:25 -04:00
Thomas Harte
ccd2cb44a2
Fills in enough of the SCC to allow completion of the Macintosh side of that relationship.
2019-06-12 17:51:50 -04:00
Thomas Harte
ad8b68c998
Switches to a proper form of zero-upon-read data.
...
Not that it's necessarily correct.
2019-06-11 19:53:51 -04:00
Thomas Harte
3c075e9542
Switches drives 0 and 1.
2019-06-10 14:58:39 -04:00
Thomas Harte
9230969f43
Corrects enough of the 6522 and Keyboard to get an initial command seemingly working.
2019-06-10 09:28:27 -04:00
Thomas Harte
0e16c67805
Improves shift register connection, towards having the keyboard function properly.
...
It now seems not to receive a command terminator, but is at least getting a command.
2019-06-08 23:04:55 -04:00
Thomas Harte
697e094a4e
Sketches out the absolute basics of an SCC interface.
2019-06-08 18:47:11 -04:00
Thomas Harte
50d37798a2
Eradicates magic constants.
2019-06-06 21:37:43 -04:00
Thomas Harte
e9d0676e75
Fiddles further with the tachometer.
2019-06-06 21:36:19 -04:00
Thomas Harte
7591906777
Numerous IWM fixes: the machine now seems to be trying to measure the tachometer.
2019-06-06 18:32:11 -04:00
Thomas Harte
a413ae11cb
Makes some sort of first attempt at having the IWM read.
2019-06-04 22:13:00 -04:00
Thomas Harte
b8a1553368
Adds putative support for PlusToo-style BIN files.
...
Albeit a bit of a guess, since it's not intended to be an emulator file format.
2019-06-04 21:41:09 -04:00
Thomas Harte
8557558bd8
Mildly improves investigatory reporting.
2019-06-03 21:51:45 -04:00
Thomas Harte
abe55fe950
Adds Timer 1 toggling of PB7.
2019-06-03 15:39:20 -04:00
Thomas Harte
da2b190288
Stores expected bit length.
2019-06-01 19:08:29 -04:00
Thomas Harte
48d837c636
Attempts to respond more sensibly to various queries.
...
Including adding a 1-second delay on motor off.
2019-06-01 18:43:47 -04:00
Thomas Harte
723137c0d4
With some time additions to the 6522, starts wiring in Macintosh audio.
...
The audio buffer is also the disk motor buffer, so this is preparatory to further disk work.
2019-06-01 14:39:40 -04:00
Thomas Harte
4197c6f149
Attempts to make some further semantic sense of the various IWM controls.
2019-05-30 22:17:49 -04:00