the alias of an InstAlias instead of the thing being aliased. Because we need to
know the features that are valid for an InstAlias.
This is part of a work-in-progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127986 91177308-0d34-0410-b5e6-96231b3b80d8
to have single return block (at least getting there) for optimizations. This
is general goodness but it would prevent some tailcall optimizations.
One specific case is code like this:
int f1(void);
int f2(void);
int f3(void);
int f4(void);
int f5(void);
int f6(void);
int foo(int x) {
switch(x) {
case 1: return f1();
case 2: return f2();
case 3: return f3();
case 4: return f4();
case 5: return f5();
case 6: return f6();
}
}
=>
LBB0_2: ## %sw.bb
callq _f1
popq %rbp
ret
LBB0_3: ## %sw.bb1
callq _f2
popq %rbp
ret
LBB0_4: ## %sw.bb3
callq _f3
popq %rbp
ret
This patch teaches codegenprep to duplicate returns when the return value
is a phi and where the phi operands are produced by tail calls followed by
an unconditional branch:
sw.bb7: ; preds = %entry
%call8 = tail call i32 @f5() nounwind
br label %return
sw.bb9: ; preds = %entry
%call10 = tail call i32 @f6() nounwind
br label %return
return:
%retval.0 = phi i32 [ %call10, %sw.bb9 ], [ %call8, %sw.bb7 ], ... [ 0, %entry ]
ret i32 %retval.0
This allows codegen to generate better code like this:
LBB0_2: ## %sw.bb
jmp _f1 ## TAILCALL
LBB0_3: ## %sw.bb1
jmp _f2 ## TAILCALL
LBB0_4: ## %sw.bb3
jmp _f3 ## TAILCALL
rdar://9147433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127953 91177308-0d34-0410-b5e6-96231b3b80d8
not have native support for this operation (such as X86).
The legalized code uses two vector INT_TO_FP operations and is faster
than scalarizing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127951 91177308-0d34-0410-b5e6-96231b3b80d8
The relevant instruction table entries were changed sometime ago to no longer take
<Rt2> as an operand. Modify ARMDisassemblerCore.cpp to accomodate the change and
add a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127935 91177308-0d34-0410-b5e6-96231b3b80d8
- Emit mad instead of mad.rn for shader model 1.0
- Emit explicit mov.u32 instructions for reading global variables
- (most PTX instructions cannot take global variable immediates)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127895 91177308-0d34-0410-b5e6-96231b3b80d8
comparisons on x86. Essentially, the way this works is that SUB+SBB sets
the relevant flags the same way a double-width CMP would.
This is a substantial improvement over the generic lowering in LLVM. The output
is also shorter than the gcc-generated output; I haven't done any detailed
benchmarking, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127852 91177308-0d34-0410-b5e6-96231b3b80d8
o A8.6.195 STR (register) -- Encoding T1
o A8.6.193 STR (immediate, Thumb) -- Encoding T1
It has been changed so that now they use different addressing modes
and thus different MC representation (Operand Infos). Modify the
disassembler to reflect the change, and add relevant tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127833 91177308-0d34-0410-b5e6-96231b3b80d8
rather than an int. Thankfully, this only causes LLVM to miss optimizations, not
generate incorrect code.
This just fixes the zext at the return. We still insert an i32 ZextAssert when
reading a function's arguments, but it is followed by a truncate and another i8
ZextAssert so it is not optimized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127766 91177308-0d34-0410-b5e6-96231b3b80d8
1. The ARM Darwin *r9 call instructions were pseudo-ized recently.
Modify the ARMDisassemblerCore.cpp file to accomodate the change.
2. The disassembler was unnecessarily adding 8 to the sign-extended imm24:
imm32 = SignExtend(imm24:'00', 32); // A8.6.23 BL, BLX (immediate)
// Encoding A1
It has no business doing such. Removed the offending logic.
Add test cases to arm-tests.txt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127707 91177308-0d34-0410-b5e6-96231b3b80d8
accept. If a value in the mask is out of range, it uses the value 0, for VTBL,
or leaves the value unchanged, for VTBX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127700 91177308-0d34-0410-b5e6-96231b3b80d8
in the instruction tables and fixed a few bugs that
were causing decode conflicts. Rudimentary tests
are coming up in the next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127646 91177308-0d34-0410-b5e6-96231b3b80d8
instruction set. This code adds support for the VEX prefix
and for the YMM registers accessible on AVX-enabled
architectures. Instruction table support that enables AVX
instructions for the disassembler is in an upcoming patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127644 91177308-0d34-0410-b5e6-96231b3b80d8
register operand was erroneously added. Remove an incorrect assert which triggers the bug.
rdar://problem/9131529
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127642 91177308-0d34-0410-b5e6-96231b3b80d8
Also more cleanly separate the ARM vs. Thumb functionality. Previously, the
encoding would be incorrect for some Thumb instructions (the indirect calls).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127637 91177308-0d34-0410-b5e6-96231b3b80d8
Go ahead and add them on when we might want to use them and let
later passes remove them.
Fixes rdar://9118569
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127518 91177308-0d34-0410-b5e6-96231b3b80d8
actual instruction as the non-Darwin defs, but have different call-clobber
semantics and so need separate patterns. They don't need to duplicate the
encoding information, however.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127515 91177308-0d34-0410-b5e6-96231b3b80d8
corresponding testcases back to the previous versions.
Fixes some performance regressions only seen on 32-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127441 91177308-0d34-0410-b5e6-96231b3b80d8
flexible.
If it returns a register class that's different from the input, then that's the
register class used for cross-register class copies.
If it returns a register class that's the same as the input, then no cross-
register class copies are needed (normal copies would do).
If it returns null, then it's not at all possible to copy registers of the
specified register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127368 91177308-0d34-0410-b5e6-96231b3b80d8
The insufficient encoding information of the combined instruction confuses the decoder wrt
UQADD16. Add extra logic to recover from that.
Fixed an assert reported by Sean Callanan
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127354 91177308-0d34-0410-b5e6-96231b3b80d8
testcases accordingly. Some are currently xfailed and will be filed
as bugs to be fixed or understood.
Performance results:
roughly neutral on SPEC
some micro benchmarks in the llvm suite are up between 100 and 150%, only
a pair of regressions that are due to be investigated
john-the-ripper saw:
10% improvement in traditional DES
8% improvement in BSDI DES
59% improvement in FreeBSD MD5
67% improvement in OpenBSD Blowfish
14% improvement in LM DES
Small compile time impact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127208 91177308-0d34-0410-b5e6-96231b3b80d8
This is just very first approximation how the stuff should be done
(e.g. ARM-only for now). More to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127101 91177308-0d34-0410-b5e6-96231b3b80d8
regs. This is the only change in this checkin that may affects the
default scheduler. With better register tracking and heuristics, it
doesn't make sense to artificially lower the register limit so much.
Added -sched-high-latency-cycles and X86InstrInfo::isHighLatencyDef to
give the scheduler a way to account for div and sqrt on targets that
don't have an itinerary. It is currently defaults to 10 (the actual
number doesn't matter much), but only takes effect on non-default
schedulers: list-hybrid and list-ilp.
Added several heuristics that can be individually disabled for the
non-default sched=list-ilp mode. This helps us determine how much
better we can do on a given benchmark than the default
scheduler. Certain compute intensive loops run much faster in this
mode with the right set of heuristics, and it doesn't seem to have
much negative impact elsewhere. Not all of the heuristics are needed,
but we still need to experiment to decide which should be disabled by
default for sched=list-ilp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127067 91177308-0d34-0410-b5e6-96231b3b80d8
There was a previous implementation with patterns that would
have matched e.g.
shl <v4i32> <i32>,
but this is not valid LLVM IR so they never were selected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126998 91177308-0d34-0410-b5e6-96231b3b80d8
and iprintf is available on the target. Currently iprintf is only
marked as being available on the XCore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126935 91177308-0d34-0410-b5e6-96231b3b80d8
missing patterns for them.
Add a SIMD test subdirectory to hold tests for SIMD instruction
selection correctness and quality.
'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126845 91177308-0d34-0410-b5e6-96231b3b80d8
- Allow i16, i32, i64, float, and double types, using the native .u16,
.u32, .u64, .f32, and .f64 PTX types.
- Allow loading/storing of all primitive types.
- Allow primitive types to be passed as parameters.
- Allow selection of PTX Version and Shader Model as sub-target attributes.
- Merge integer/floating-point test cases for load/store.
- Use .u32 instead of .s32 to conform to output from NVidia nvcc compiler.
Patch by Justin Holewinski
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126824 91177308-0d34-0410-b5e6-96231b3b80d8
and 256-bit forms. Because the number of elements in a vector
does not determine the vector type (4 elements could be v4f32 or
v4f64), pass the full type of the vector to decode routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126664 91177308-0d34-0410-b5e6-96231b3b80d8
The implemented algorithm is overly simplistic (just speculate all branches are
taken)- this is work in progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126651 91177308-0d34-0410-b5e6-96231b3b80d8
- Add appropriate TableGen patterns for fadd, fsub, fmul.
- Add .f32 as the PTX type for the LLVM float type.
- Allow parameters, return values, and global variable declarations
to accept the float type.
- Add appropriate test cases.
Patch by Justin Holewinski
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126636 91177308-0d34-0410-b5e6-96231b3b80d8
It improves Win64's prologue/epilogue but it would not affect ia32 and amd64 (lack of nonvolatile XMMs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126568 91177308-0d34-0410-b5e6-96231b3b80d8
1. Inform users of ADDEs with two 0 operands that it never sets carry
2. Fold other ADDs or ADDCs into the ADDE if possible
It would be neat if we could do the same thing for SETCC+ADD eventually, but we can't do that in target independent code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126557 91177308-0d34-0410-b5e6-96231b3b80d8