copy of the BURRList scheduler, but with several parts ripped
out, such as backtracking, online topological sort maintenance
(needed by backtracking), the priority queue, and Sethi-Ullman
number computation and maintenance (needed by the priority
queue). As a result of all this, it generates somewhat lower
quality code, but that's its tradeoff for running about 30%
faster than list-burr in -fast mode in many cases.
This is somewhat experimental. Moving forward, major pieces of
this can be refactored with pieces in common with
ScheduleDAGRRList.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56307 91177308-0d34-0410-b5e6-96231b3b80d8
with an earlyclobber operand elsewhere. Propagate
this bit and the earlyclobber bit through SDISel.
Change linear-scan RA not to allocate regs in a way
that conflicts with an earlyclobber. See also comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56290 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantPoolSDNode, using the target's preferred alignment for the
constant type.
In LegalizeDAG, when performing loads from the constant pool, the
ConstantPoolSDNode's alignment is used in the calls to getLoad and
getExtLoad.
This change prevents SelectionDAG::getLoad/getExtLoad from incorrectly
choosing the ABI alignment for constant pool loads when Alignment == 0.
The incorrect alignment is only a performance issue when ABI alignment
does not equal preferred alignment (i.e., on x86 it was generating
MOVUPS instead of MOVAPS for v4f32 constant loads when the default ABI
alignment for 128bit vectors is forced to 1 byte.)
Patch by Paul Redmond!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56253 91177308-0d34-0410-b5e6-96231b3b80d8
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56249 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. Also, their valno's should have an unknown def. This has no effect currently, but was
causing issues when StrongPHIElimination was enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56231 91177308-0d34-0410-b5e6-96231b3b80d8
isImmediate(), isRegister(), and friends, to avoid confusion
about having two different names with the same meaning. I'm
not attached to the longer names, and would be ok with
changing to the shorter names if others prefer it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56189 91177308-0d34-0410-b5e6-96231b3b80d8
Currently it just holds the calling convention and flags
for isVarArgs and isTailCall.
And it has several utility methods, which eliminate magic
5+2*i and similar index computations in several places.
CallSDNodes are not CSE'd. Teach UpdateNodeOperands to handle
nodes that are not CSE'd gracefully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56183 91177308-0d34-0410-b5e6-96231b3b80d8
vr2 = OR vr0, vr1
=>
vr2 = OR vr1, vr1 // after coalescing vr0 with vr1
Update the value# of the destination register with the copy instruction if that happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56165 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56162 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
vr1024 = extract_subreg vr1025, 1
...
vr1024 = mov8rr AH
If vr1024 is coalesced with AH, the extract_subreg is now illegal since AH does not have a super-reg whose sub-register 1 is AH.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56118 91177308-0d34-0410-b5e6-96231b3b80d8
was exposed by fast isel's handling of shifts on X86-64. With this, FreeBench/pcompress2 passes on X86-64 in fast isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56067 91177308-0d34-0410-b5e6-96231b3b80d8
form:
powf(10.0f, x);
If this is the case, and also we want limited precision floating-point
calculations, then lower to do the limited-precision stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56035 91177308-0d34-0410-b5e6-96231b3b80d8
to being off by default. Also, add assertion checks to check that
the various fast-isel-related command-line options are only used
when -fast-isel itself is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56029 91177308-0d34-0410-b5e6-96231b3b80d8
UsedDirective for some symbols in llvm.used into
Darwin-specific code. I've decided LessPrivateGlobal
is potentially a useful abstraction and left it in
the target-independent area, with improved comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56024 91177308-0d34-0410-b5e6-96231b3b80d8
the case of loads, stores, and conditional branches. It can
handle those now, so any that aren't handled should trigger
the abort.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55977 91177308-0d34-0410-b5e6-96231b3b80d8
objects in llvm.used (thanks Anton). Makes visible
the magic 'l' prefix for symbols on Darwin which are
to be passed through the assembler, then removed at
linktime (previously all references to this had been
hidden in the ObjC FE code, oh well).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55973 91177308-0d34-0410-b5e6-96231b3b80d8
before. This is taken care of in the selection DAG pass. In my opinion, this
should be in one place or the other. I.e., it should probably be removed from
the DAG combiner (along with the other arithmetic transformations on constants
that are essentially no-ops).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55889 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a AnalyzeCallResult specialized for calls which produce a single value. This is used by fastisel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55879 91177308-0d34-0410-b5e6-96231b3b80d8
out of ScheduleDAGEmit.cpp and into SelectionDAGISel.cpp. This
allows it to be run exactly once per function, even if multiple
SelectionDAG iterations happen in the entry block, as may happen
with FastISel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55863 91177308-0d34-0410-b5e6-96231b3b80d8
but less accurate (non-IEEE) code sequences for
certain math library functions. Add the first of
several such expansions. Don't worry, if you don't
turn it on it won't affect you.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55823 91177308-0d34-0410-b5e6-96231b3b80d8
in the same block. Fix the entry-block handling to only run at
at the beginning of the entry block, and not any other times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55817 91177308-0d34-0410-b5e6-96231b3b80d8
HandlePHINodesInSuccessorBlocks that works FastISel-style. This
allows PHI nodes to be updated correctly while using FastISel.
This also involves some code reorganization; ValueMap and
MBBMap are now members of the FastISel class, so they needn't
be passed around explicitly anymore. Also, SelectInstructions
is changed to SelectInstruction, and only does one instruction
at a time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55746 91177308-0d34-0410-b5e6-96231b3b80d8
list that have internal linkage; the linker doesn't need
or want this. (These objects must still be preserved
at compile time, so just removing them from the llvm.used
list doesn't work.) Should affect only Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55722 91177308-0d34-0410-b5e6-96231b3b80d8
the simple fix, materializing the constant before every use. It might be better to either track domination of uses or
to materialize all constants and the beginning of the function and let remat sort when to do materialization at uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55703 91177308-0d34-0410-b5e6-96231b3b80d8
and SelectionDAGLowering classes, out of SelectionDAGISel.cpp and put
it in a separate file, SelectionDAGBuild.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55701 91177308-0d34-0410-b5e6-96231b3b80d8
when searching for redundant subregister dead/kill bits.
Previously it was common to see instructions marked like this:
"RET %EAX<imp-use,kill>, %AX<imp-use,kill>"
With this change, addRegisterKilled continues scanning after
finding the %EAX operand, so it proceeds to discover the
redundant %AX kill and eliminates it, producing this:
"RET %EAX<imp-use,kill>"
This currently has no effect on the generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55698 91177308-0d34-0410-b5e6-96231b3b80d8
The first can update the SDNode in an SDValue
while the second is called with SDNode* and
returns a possibly updated SDNode*.
This patch has no intended functional impact,
but helps eliminating ugly temporary SDValues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55608 91177308-0d34-0410-b5e6-96231b3b80d8
assignment when selecting the def. This is the naive solution to the problem: insert a copy to the pre-chosen
vreg. Other solutions might be preferable, such as:
1) Passing the dest reg into FastEmit_. However, this would require the higher level code to know about reg classes, which they don't currently.
2) Selecting blocks in reverse postorder. This has some compile time cost for computing the order, and we'd need to measure its impact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55555 91177308-0d34-0410-b5e6-96231b3b80d8
its work by putting all nodes in the worklist, requiring a big
dynamic allocation. Now, DAGCombiner just iterates over the AllNodes
list and maintains a worklist for nodes that are newly created or
need to be revisited. This allows the worklist to stay small in most
cases, so it can be a SmallVector.
This has the side effect of making DAGCombine not miss a folding
opportunity in alloca-align-rounding.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55498 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGLowering instead of being in an anonymous namespace.
This fixes warnings about SelectionDAGLowering having fields
using anonymous namespaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55497 91177308-0d34-0410-b5e6-96231b3b80d8
ATOMIC_LOAD_ADD_{8,16,32,64} instead of ATOMIC_LOAD_ADD.
Increased the Hardcoded Constant OpActionsCapacity to match.
Large but boring; no functional change.
This is to support partial-word atomics on ppc; i8 is
not a valid type there, so by the time we get to lowering, the
ATOMIC_LOAD nodes looks the same whether the type was i8 or i32.
The information can be added to the AtomicSDNode, but that is the
largest SDNode; I don't fully understand the SDNode allocation,
but it is sensitive to the largest node size, so increasing
that must be bad. This is the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55457 91177308-0d34-0410-b5e6-96231b3b80d8
works with.
SelectionDAG, FunctionLoweringInfo, and SelectionDAGLowering
objects now get created once per SelectionDAGISel instance, and
can be reused across blocks and across functions. Previously,
they were created and destroyed each time they were needed.
This reorganization simplifies the handling of PHI nodes, and
also SwitchCases, JumpTables, and BitTestBlocks. This
simplification has the side effect of fixing a bug in FastISel
where successor PHI nodes weren't being updated correctly.
This is also a step towards making the transition from FastISel
into and out of SelectionDAG faster, and also making
plain SelectionDAG faster on code with lots of little blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55450 91177308-0d34-0410-b5e6-96231b3b80d8
just try to do the action and let the tablegen-generated code
determine if there is target-support for an operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55427 91177308-0d34-0410-b5e6-96231b3b80d8
the details of materializing constants and other values into
registers, and make use of it in several places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55426 91177308-0d34-0410-b5e6-96231b3b80d8
of two, and to not need a scratch std::vector. Also, compute the ordering
immediately in the result array, instead of in another scratch std::vector
that is copied to the result array.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55421 91177308-0d34-0410-b5e6-96231b3b80d8
of two, and to not need a scratch std::vector. Also, use the
SelectionDAG's topological sort in LegalizeDAG instead of having
a separate implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55389 91177308-0d34-0410-b5e6-96231b3b80d8
was inserted or not. This allows bitcast in fast isel to properly handle the case
where an appropriate reg-to-reg copy is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55375 91177308-0d34-0410-b5e6-96231b3b80d8
RecyclingAllocator, but this change is needed for the nodes
to actually be recycled. This cuts SelectionDAG's memory
usage high-water-mark in half in some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55351 91177308-0d34-0410-b5e6-96231b3b80d8
use raw_ostream instead of std::ostream. Among other goodness,
this speeds up llvm-dis of kc++ with a release build from 0.85s
to 0.49s (88% faster).
Other interesting changes:
1) This makes Value::print be non-virtual.
2) AP[S]Int and ConstantRange can no longer print to ostream directly,
use raw_ostream instead.
3) This fixes a bug in raw_os_ostream where it didn't flush itself
when destroyed.
4) This adds a new SDNode::print method, instead of only allowing "dump".
A lot of APIs have both std::ostream and raw_ostream versions, it would
be useful to go through and systematically anihilate the std::ostream
versions.
This passes dejagnu, but there may be minor fallout, plz let me know if
so and I'll fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55263 91177308-0d34-0410-b5e6-96231b3b80d8
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55219 91177308-0d34-0410-b5e6-96231b3b80d8
handled correctly, and change a few SmallVector uses to use
size 0 to more clearly reflect their intent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55181 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in FastISelEmitter.cpp, and make FastISel
subtarget aware. Among other things, this lets it work
properly on x86 targets that don't have SSE, where it
successfully selects x87 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55156 91177308-0d34-0410-b5e6-96231b3b80d8
class hold a MachineRegisterInfo member, and make the
MachineBasicBlock be passed in to SelectInstructions rather
than the FastISel constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55076 91177308-0d34-0410-b5e6-96231b3b80d8
alignment and volatility information, such as loads and
stores, to reduce the number of integer values added to
the FoldingSetNodeID.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55058 91177308-0d34-0410-b5e6-96231b3b80d8
a command-line option, so that the default behavior is an abort, which
is useful for exposing code that isn't supported yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55028 91177308-0d34-0410-b5e6-96231b3b80d8
With this patch, all of MultiSource/Applications and all of SPEC2000/2006 pass with
the SimpleSpiller and this fast-path enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55000 91177308-0d34-0410-b5e6-96231b3b80d8
1) Assign stack slots to new temporaries.
2) Don't insert an interval into the return vector more than once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54956 91177308-0d34-0410-b5e6-96231b3b80d8
1) Remove an incorrect assertion.
2) Set the stack slot weight properly.
3) Resize the VirtRegMap when needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54949 91177308-0d34-0410-b5e6-96231b3b80d8
in so far as it compiles and, in theory, works, but does not take advantage of recent advancements. For instance, it could be improved by using
MachineRegisterInfo::use_iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54924 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, Collector was confusing to implementors. Several
thought that this compile-time class was the place to implement
their runtime GC heap. Of course, it doesn't even exist at runtime.
Specifically, the renames are:
Collector -> GCStrategy
CollectorMetadata -> GCFunctionInfo
CollectorModuleMetadata -> GCModuleInfo
CollectorRegistry -> GCRegistry
Function::getCollector -> getGC (setGC, hasGC, clearGC)
Several accessors and nested types have also been renamed to be
consistent. These changes should be obvious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54899 91177308-0d34-0410-b5e6-96231b3b80d8
returning an std::string by value, it fills in a SmallString/SmallVector
passed in. This significantly reduces string thrashing in some cases.
More specifically, this:
- Adds an operator<< and a print method for APInt that allows you to
directly send them to an ostream.
- Reimplements APInt::toString to be much simpler and more efficient
algorithmically in addition to not thrashing strings quite as much.
This speeds up llvm-dis on kc++ by 7%, and may also slightly speed up the
asmprinter. This also fixes a bug I introduced into the asmwriter in a
previous patch w.r.t. alias printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54873 91177308-0d34-0410-b5e6-96231b3b80d8
subregister query, and by increasing the size of the subregister hashtable so
that there are fewer collisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54781 91177308-0d34-0410-b5e6-96231b3b80d8
can have a non-negative result; for example, -16%16 is 0. Also,
clarify the related comments. This fixes PR2670.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54767 91177308-0d34-0410-b5e6-96231b3b80d8
the comments in FastISelEmitter.cpp for details on what this is.
This is currently experimental and unusable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54751 91177308-0d34-0410-b5e6-96231b3b80d8
FPROUND_F80_F32, FPROUND_PPCF128_F32,
FPROUND_F80_F64, FPROUND_PPCF128_F64
Support for soften float fp_round operands is added, Mips
needs this to round f64->f32.
Also added support to soften float FABS result, Mips doesn't
support double fabs results while in 'single float only' mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54484 91177308-0d34-0410-b5e6-96231b3b80d8
LowerSubregs, and fix an x86-64 isel bug that this exposed.
SUBREG_TO_REG for x86-64 implicit zero extension is only safe for
isel to generate when the source is known to always have zeros in
the high 32 bits. The EXTRACT_SUBREG instruction does not clear
the high 32 bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54444 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a basic machine-level dead block eliminator.
These two have to go together, since many other parts of the code generator are unable to handle the unreachable blocks otherwise created.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54333 91177308-0d34-0410-b5e6-96231b3b80d8
switches use the binary search algorithm) for
environments that don't support it. PPC64 JIT
is such an environment; turn the flag on for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54248 91177308-0d34-0410-b5e6-96231b3b80d8
the operand's interval that share the relevant value number, not just the range that immediately precedes the PHI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54174 91177308-0d34-0410-b5e6-96231b3b80d8
to be marked invalid regardless of whether it is
a debug, an exception handling or (hopefully) a
GC label.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54172 91177308-0d34-0410-b5e6-96231b3b80d8
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54146 91177308-0d34-0410-b5e6-96231b3b80d8
parallel its analogue, Value::value_use_iterator. The operator* method
now returns the user, rather than the use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54127 91177308-0d34-0410-b5e6-96231b3b80d8
is to have StrongPHIElimination use its knowledge of the PHIs before they're erased to update the intervals appropriate. This is
both simpler and more accurate than the alternative, which was having LIA figure it out when it renumbered things, plus it's just
the right thing to do!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54077 91177308-0d34-0410-b5e6-96231b3b80d8
by the PHI needs to be extended to the beginning of its basic block, and the intervals that were inputs need to be trimmed to the end
of their basic blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54070 91177308-0d34-0410-b5e6-96231b3b80d8
This is tricky business, and will probably take a few more iterations to get
the last kinks out of it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54043 91177308-0d34-0410-b5e6-96231b3b80d8
regressions, such as PR2595. Also, there is a significant code-quality
issue in SPEC 464.h264ref and a few others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54014 91177308-0d34-0410-b5e6-96231b3b80d8
and knowledge of PseudoSourceValues. This unfortunately isn't sufficient to allow
constants to be rematerialized in PIC mode -- the extra indirection is a
complication.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54000 91177308-0d34-0410-b5e6-96231b3b80d8
to multiply the instruction count by a constant factor in a few places, which
caused the register allocator to require many more iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53959 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the GetResultInst instruction. It is still accepted in LLVM assembly
and bitcode, where it is now auto-upgraded to ExtractValueInst. Also, remove
support for return instructions with multiple values. These are auto-upgraded
to use InsertValueInst instructions.
The IRBuilder still accepts multiple-value returns, and auto-upgrades them
to InsertValueInst instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53941 91177308-0d34-0410-b5e6-96231b3b80d8
live intervals itself to use an instruction count approximation that is
not affected by inserting empty indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53937 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG graph writer to make use of them. Now, nodes with multiple
values are displayed as such, with incoming edges pointing to the
specific value they use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53875 91177308-0d34-0410-b5e6-96231b3b80d8
that include useful information like the name of the
block being viewed and the current phase of compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53872 91177308-0d34-0410-b5e6-96231b3b80d8
generic SDNode's (nodes with their own constructors
should do sanity checking in the constructor). Add
sanity checks for BUILD_VECTOR and fix all the places
that were producing bogus BUILD_VECTORs, as found by
"make check". My favorite is the BUILD_VECTOR with
only two operands that was being used to build a
vector with four elements!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53850 91177308-0d34-0410-b5e6-96231b3b80d8
If .loc and .file aren't used, always emit the "debug_line" section. This
requires at least one entry in the line matrix. So if there's nothing to emit
into the matrix, emit an end of matrix value anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53803 91177308-0d34-0410-b5e6-96231b3b80d8
the night realising that it was wrong :) I
think the reason the same type was being used
for the shufflevec of indices as for the actual
indices is so that if one of them needs splitting
then so does the other. After my patch it might
be that the indices need splitting but not the
rest, yet there is no good way of handling that.
I think the right solution is to not have the
shufflevec be an operand at all: just have it
be the list of numbers it actually is, stored
as extra info in the node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53768 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a leak that this turned up in LowerSubregs.cpp.
And, comment a leak in LiveIntervalAnalysis.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53746 91177308-0d34-0410-b5e6-96231b3b80d8
PseudoSourceValue values, which never have names. Use getName()
for all other values, because we want to print just a short summary
of the value, not the entire instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53738 91177308-0d34-0410-b5e6-96231b3b80d8
