The blocking code originated in ARM, which is more aggressive about casting
types to a canonical representative before doing anything else, so I missed out
most vector HFAs and broke the ABI. This should fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223126 91177308-0d34-0410-b5e6-96231b3b80d8
Load instructions are inserted into loop preheaders when sinking stores
and later removed if not used by the SSA updater. Avoid sinking if the
loop has no preheader and avoid crashes. This fixes one more side effect
of not handling indirectbr instructions properly on LoopSimplify.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223119 91177308-0d34-0410-b5e6-96231b3b80d8
Certain ARM instructions accept 32-bit immediate operands encoded as a 8-bit
integer value (0-255) and a 4-bit rotation (0-30, even). Current ARM assembly
syntax support in LLVM allows the decoded (32-bit) immediate to be specified
as a single immediate operand for such instructions:
mov r0, #4278190080
The ARMARM defines an extended assembly syntax allowing the encoding to be made
more explicit, as in:
mov r0, #255, #8 ; (same 32-bit value as above)
The behaviour of the two instructions can be different w.r.t flags, which is
documented under "Modified immediate constants" in ARMARM. This patch enables
support for this extended syntax at the MC layer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223113 91177308-0d34-0410-b5e6-96231b3b80d8
The default ARM floating-point mode does not support IEEE 754 mode exactly. Of
relevance to this patch is that input denormals are flushed to zero. The way in
which they're flushed to zero depends on the architecture,
* For VFPv2, it is implementation defined as to whether the sign of zero is
preserved.
* For VFPv3 and above, the sign of zero is always preserved when a denormal
is flushed to zero.
When FP support has been disabled, the strategy taken by this patch is to
assume the software support will mirror the behaviour of the hardware support
for the target *if it existed*. That is, for architectures which can only have
VFPv2, it is assumed the software will flush to positive zero. For later
architectures it is assumed the software will flush to zero preserving sign.
Change-Id: Icc5928633ba222a4ba3ca8c0df44a440445865fd
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223110 91177308-0d34-0410-b5e6-96231b3b80d8
System memory allocation functions, which are identified at the IR level by the
noalias attribute on the return value, must return a pointer into a memory region
disjoint from any other memory accessible to the caller. We can use this
property to simplify pointer comparisons between allocated memory and local
stack addresses and the addresses of global variables. Neither the stack nor
global variables can overlap with the region used by the memory allocator.
Fixes PR21556.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223093 91177308-0d34-0410-b5e6-96231b3b80d8
The statepoint intrinsics are intended to enable precise root tracking through the compiler as to support garbage collectors of all types. The addition of the statepoint intrinsics to LLVM should have no impact on the compilation of any program which does not contain them. There are no side tables created, no extra metadata, and no inhibited optimizations.
A statepoint works by transforming a call site (or safepoint poll site) into an explicit relocation operation. It is the frontend's responsibility (or eventually the safepoint insertion pass we've developed, but that's not part of this patch series) to ensure that any live pointer to a GC object is correctly added to the statepoint and explicitly relocated. The relocated value is just a normal SSA value (as seen by the optimizer), so merges of relocated and unrelocated values are just normal phis. The explicit relocation operation, the fact the statepoint is assumed to clobber all memory, and the optimizers standard semantics ensure that the relocations flow through IR optimizations correctly.
This is the first patch in a small series. This patch contains only the IR parts; the documentation and backend support will be following separately. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
Reviewed by: atrick, ributzka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223078 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
".weak" symbols cannot be consumed by ptxas (PR21685). This patch makes the
weak directive in MCAsmPrinter customizable, and disables emitting ".weak"
symbols for NVPTX.
Test Plan: weak-linkage.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6455
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223077 91177308-0d34-0410-b5e6-96231b3b80d8
r208210 introduced an optimization that improves the vector select
codegen by doing the setcc on vectors directly.
This is a problem they the setcc operands are i1s, because the
optimization would create vectors of i1, which aren't legal.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6308
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223075 91177308-0d34-0410-b5e6-96231b3b80d8
r213378 improved f16 bitcasts, so that they go directly through subregs,
instead of through the stack. That code now causes an assertion failure
for bitcasts from other 16-bits types (most importantly v2i8).
Correct that by doing the custom lowering for i16 bitcasts only when the
input is an f16.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6307
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223074 91177308-0d34-0410-b5e6-96231b3b80d8
The MachineVerifier used to check that there was always exactly one
unconditional branch to a non-landingpad (normal) successor.
If that normal successor to an invoke BB is unreachable, it seems
reasonable to only have one successor, the landing pad.
On targets other than AArch64 (and on AArch64 with a different testcase),
the branch folder turns the branch to the landing pad into a fallthrough.
The MachineVerifier, which relies on AnalyzeBranch, is unable to check
the condition, and doesn't complain. However, it does in this specific
testcase, where the branch to the landing pad remained.
Make the MachineVerifier accept it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223059 91177308-0d34-0410-b5e6-96231b3b80d8
An unreachable default destination can be exploited by other optimizations, and
SDag lowering is now prepared to handle them efficiently.
For example, branches to the unreachable destination will be optimized away,
such as in the case of range checks for switch lookup tables.
On 64-bit Linux, this reduces the size of a clang bootstrap by 80 kB (and
Chromium by 30 kB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223050 91177308-0d34-0410-b5e6-96231b3b80d8
This can significantly reduce the size of the switch, allowing for more
efficient lowering.
I also worked with the idea of exploiting unreachable defaults by
omitting the range check for jump tables, but always ended up with a
non-neglible binary size increase. It might be worth looking into some more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223049 91177308-0d34-0410-b5e6-96231b3b80d8
The explicit set of destination types is not fully redundant when lazy loading
since the TypeFinder will not find types used only in function bodies.
This keeps the logic to drop the name of mapped types since it still helps
with avoiding further renaming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223043 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly doesn't
work because the offset from SP to CFA is not a constant. Fix it by
defining CFA as BP instead.
This was causing the AddressSanitizer null_deref test to fail 50% of
the time, depending on whether SP happened to be 32-byte aligned on
entry to a particular function or not.
Reviewers: willschm, uweigand, hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6410
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222996 91177308-0d34-0410-b5e6-96231b3b80d8
Add checkDecodedInstruction for post-decode checking of instructions, to catch
the corner cases like HVC that don't fit into the general pattern. Needed to
check for an invalid condition field in instruction encoding despite HVC not
taking a predicate.
Patch by Matthew Wahab.
Change-Id: I48e28de981d7a9e43569594da3c45fb478b4f795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222992 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of keeping an explicit set, just drop the names of types we choose
to map to some other type.
This has the advantage that the name of the unused will not cause the context
to rename types on module read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222986 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for the fixed-point cache-inhibited load/store
instructions. These are hypervisor-level only, so don't get too excited ;)
Fixes PR21650.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222976 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222632 (and follow-up r222636), which caused a host
of LNT failures on an internal bot. I'll respond to the commit on the
list with a reproduction of one of the failures.
Conflicts:
lib/Target/X86/X86TargetTransformInfo.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222936 91177308-0d34-0410-b5e6-96231b3b80d8
We may be in a situation where the icmps might not be near each other in
a tree of or instructions. Try to dig out related compare instructions
and see if they combine.
N.B. This won't fire on deep trees of compares because rewritting the
tree might end up creating a net increase of IR. We may have to resort
to something more sophisticated if this is a real problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222928 91177308-0d34-0410-b5e6-96231b3b80d8
Loop simplify skips exit-block insertion when exits contain indirectbr
instructions. This leads to an assertion in LICM when trying to sink
stores out of non-dedicated loop exits containing indirectbr
instructions. This patch fix this issue by re-checking for dedicated
exits in LICM prior to store sink attempts.
Differential Revision: http://reviews.llvm.org/D6414
rdar://problem/18943047
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222927 91177308-0d34-0410-b5e6-96231b3b80d8
Switch cases statements with sequential values that branch to the same
destination BB may often be handled together in a single new source BB.
In this scenario we need to remove remaining incoming values from PHI
instructions in the destination BB, as to match the number of source
branches.
Differential Revision: http://reviews.llvm.org/D6415
rdar://problem/19040894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222926 91177308-0d34-0410-b5e6-96231b3b80d8
The original patch would fail when:
* A dst opaque type (%A) is matched with a src type (%A).
* A src opaque (%E) type is then speculatively matched with %A and the
speculation fails afterward.
* When rolling back the speculation we would cancel the source %A to dest
%A mapping.
The fix is to keep an explicit list of which resolutions are speculative.
Original message:
Fix overly aggressive type merging.
If we find out that two types are *not* isomorphic, we learn nothing about
opaque sub types in both the source and destination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222923 91177308-0d34-0410-b5e6-96231b3b80d8
Add more tests to make sure the encoding/decoding of build attributes works
correctly for all permissible values of build attributes. For cases where there
are an infinite number of such values, a representative subset has been settled
for.
Change-Id: I2643c9624c211b2d56405306e16eec2d487bc5d6
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222917 91177308-0d34-0410-b5e6-96231b3b80d8
The AAPCS treats small structs and homogeneous floating (or vector) aggregates
specially, and guarantees they either get passed as a contiguous block of
registers, or prevent any future use of those registers and get passed on the
stack.
This concept can fit quite neatly into LLVM's own type system, mapping an HFA
to [N x float] and so on, and small structs to [N x i64]. Doing so allows
front-ends to emit AAPCS compliant code without having to duplicate the
register counting logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222903 91177308-0d34-0410-b5e6-96231b3b80d8
The current 8 bits is sufficient for ELF32 targets but ELF64 requires
32 bits. Add a test for AArch64 that exposes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222898 91177308-0d34-0410-b5e6-96231b3b80d8
I also added a test.
Original message:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222897 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222760.
It changed our behaviour on PIC so we don't match gas anymore. It also
included lots of unnecessary changes to tests.
If those changes are desirable, there should be an independent discussion
as they are out of scope for that patch.
I will recommit the other bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222896 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed missing dominance check.
Original commit message:
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
Jump threading will then eliminate the second if(cond).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222891 91177308-0d34-0410-b5e6-96231b3b80d8
The string data for string-valued build attributes were being unconditionally
uppercased. There is no mention in the ARM ABI addenda about case conventions,
so it's technically implementation defined as to whether the data are
capitialised in some way or not. However, there are good reasons not to
captialise the data.
* It's less work.
* Some vendors may legitimately have case-sensitive checks for these
attributes which would fail on LLVM generated object files.
* There could be locale issues with uppercasing.
The original reasons for uppercasing appear to have stemmed from an
old codesourcery toolchain behaviour, see
http://comments.gmane.org/gmane.comp.compilers.llvm.cvs/87133
This patch makes the object file emitted no longer captialise string
data, it encodes as seen in the assembly source.
Change-Id: Ibe20dd6e60d2773d57ff72a78470839033aa5538
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222882 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
\endcode
Jump threading will then eliminate the second if(cond).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222872 91177308-0d34-0410-b5e6-96231b3b80d8
This restores our ability to optimize:
(X & C) == 0 ? X ^ C : X into X | C
(X & C) != 0 ? X ^ C : X into X & ~C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222871 91177308-0d34-0410-b5e6-96231b3b80d8
This restores our ability to optimize:
(X & C) ? X & ~C : X into X & ~C
(X & C) ? X : X & ~C into X
(X & C) ? X | C : X into X
(X & C) ? X : X | C into X | C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222868 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r210006, it miscompiled libapr which is used in who
knows how many projects.
A test has been added to ensure that we don't regress again.
I'll work on a rewrite of what the optimization was trying to do later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222856 91177308-0d34-0410-b5e6-96231b3b80d8
This mostly entails adding relocations, however there are a couple of
changes to existing relocations:
1. R_AARCH64_NONE is defined to be zero rather than 256
R_AARCH64_NONE has been defined to be zero for a long time elsewhere
e.g. binutils and glibc since the submission of the AArch64 port in
2012 so this is required for compatibility.
2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21
I don't think there is any way for relocation names to leak out of LLVM
so this should not break anything.
Tested with check-all with no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222821 91177308-0d34-0410-b5e6-96231b3b80d8
including SAE mode and memory operand.
Added AVX512_maskable_scalar template, that should cover all scalar instructions in the future.
The main difference between AVX512_maskable_scalar<> and AVX512_maskable<> is using X86select instead of vselect.
I need it, because I can't create vselect node for MVT::i1 mask for scalar instruction.
http://reviews.llvm.org/D6378
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222820 91177308-0d34-0410-b5e6-96231b3b80d8
Since (v)pslldq / (v)psrldq instructions resolve to a single input argument it is useful to match it much earlier than we currently do - this prevents more complicated shuffles (notably insertion into a zero vector) matching before it.
Differential Revision: http://reviews.llvm.org/D6409
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222796 91177308-0d34-0410-b5e6-96231b3b80d8
If solveBlockValue() needs results from predecessors that are not already
computed, it returns false with the intention of resuming when the dependencies
have been resolved. However, the computation would never be resumed since an
'overdefined' result had been placed in the cache, preventing any further
computation.
The point of placing the 'overdefined' result in the cache seems to have been
to break cycles, but we can check for that when inserting work items in the
BlockValue stack instead. This makes the "stop and resume" mechanism of
solveBlockValue() work as intended, unlocking more analysis.
Using this patch shaves 120 KB off a 64-bit Chromium build on Linux.
I benchmarked compiling bzip2.c at -O2 but couldn't measure any difference in
compile time.
Tests by Jiangning Liu from r215343 / PR21238, Pete Cooper, and me.
Differential Revision: http://reviews.llvm.org/D6397
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222768 91177308-0d34-0410-b5e6-96231b3b80d8
On LP64 platforms, it will work or not depending on the choosen memory
layout, so neither PASS nor XFAIL is appropiate.
As UNSUPPORTED as per-test target doesn't exist (yet), remove the test
instead to unbreak the builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222767 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the order in which different types are passed to get, but
one order is not inherently better than the other.
The main motivation is that this simplifies linkDefinedTypeBodies now that
it is only linking "real" opaque types. It is also means that we only have to
call it once and that we don't need getImpl.
A small change in behavior is that we don't copy type names when resolving
opaque types. This is an improvement IMHO, but it can be added back if
desired. A test is included with the new behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222764 91177308-0d34-0410-b5e6-96231b3b80d8
and PIC:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222760 91177308-0d34-0410-b5e6-96231b3b80d8
stored rather than the pointer type.
This change is analogous to r220138 which changed the canonicalization
for loads. The rationale is the same: memory does not have a type,
operations (and thus the values they produce) have a type. We should
match that type as closely as possible rather than reading some form of
semantics into the pointer type.
With this change, loads and stores should no longer be made with
nonsensical types for the values that tehy load and store. This is
particularly important when trying to match specific loaded and stored
types in the process of doing other instcombines, which is what led me
down this twisty maze of miscanonicalization.
I've put quite some effort into looking through IR to find places where
LLVM's optimizer was being unreasonably conservative in the face of
mismatched load and store types, however it is possible (let's say,
likely!) I have missed some. If you see regressions here, or from
r220138, the likely cause is some part of LLVM failing to cope with load
and store types differing. Test cases appreciated, it is important that
we root all of these out of LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222748 91177308-0d34-0410-b5e6-96231b3b80d8
clearly only exactly equal width ptrtoint and inttoptr casts are no-op
casts, it says so right there in the langref. Make the code agree.
Original log from r220277:
Teach the load analysis to allow finding available values which require
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222739 91177308-0d34-0410-b5e6-96231b3b80d8
If we find out that two types are *not* isomorphic, we learn nothing about
opaque sub types in both the source and destination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222727 91177308-0d34-0410-b5e6-96231b3b80d8
The pattern matching failed to recognize all instances of "-1", because when
comparing against "-1" we didn't use an APInt of the same bitwidth.
This commit fixes this and also adds inverse versions of the conditon to catch
more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222722 91177308-0d34-0410-b5e6-96231b3b80d8
This handles cases where we are comparing a masked value against itself.
The analysis could be further improved by making it recursive but such
expense is not currently justified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222716 91177308-0d34-0410-b5e6-96231b3b80d8
The attn instruction is not part of the Power ISA, but is documented in the A2
user manual, and is accepted by the GNU assembler for the A2 and the POWER4+.
Reported as part of PR21650.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222712 91177308-0d34-0410-b5e6-96231b3b80d8
This does not matter on newer cores (where we can use reciprocal estimates in
fast-math mode anyway), but for older cores this allows us to generate better
fast-math code where we have multiple FDIVs with a common divisor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222710 91177308-0d34-0410-b5e6-96231b3b80d8
When processing an assignment in the integrated assembler that sets
a symbol to the value of another symbol, we need to copy the st_other
bits that encode the local entry point offset.
Modeled after MipsTargetELFStreamer::emitAssignment handling of the
ELF::STO_MIPS_MICROMIPS flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222672 91177308-0d34-0410-b5e6-96231b3b80d8
We would create an instruction but not inserting it.
Not inserting the unused instruction would lead us to verification
failure.
This fixes PR21653.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222659 91177308-0d34-0410-b5e6-96231b3b80d8
With the help of new method readInstruction16() two bytes are read and
decodeInstruction() is called with DecoderTableMicroMips16, if this fails
four bytes are read and decodeInstruction() is called with
DecoderTableMicroMips32.
Differential Revision: http://reviews.llvm.org/D6149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222648 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches function 'transformVSELECTtoBlendVECTOR_SHUFFLE' how to
convert VSELECT dag nodes to shuffles on targets that do not have SSE4.1.
On pre-SSE4.1 targets, we can still perform blend operations using movss/movsd.
Also, removed a target specific combine that performed a premature lowering of
VSELECT nodes to target specific MOVSS/MOVSD nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222647 91177308-0d34-0410-b5e6-96231b3b80d8
We tried to get the result of DataLayout::getLargestLegalIntTypeSize but
we didn't have a DataLayout. This resulted in opt crashing.
This fixes PR21651.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222645 91177308-0d34-0410-b5e6-96231b3b80d8
r222375 made some improvements to build_vector lowering of v4x32 and v4xf32 into an insertps, but it missed a case where:
1. A single extracted element is used twice.
2. The lower of the two non-zero indexes should be preserved, and the higher should be used for the dest mask.
This caused a crash, since the source value for the insertps ends-up uninitialized.
Differential Revision: http://reviews.llvm.org/D6377
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222635 91177308-0d34-0410-b5e6-96231b3b80d8
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222632 91177308-0d34-0410-b5e6-96231b3b80d8
has a remarkably unique and efficient lowering.
While we get this some of the time already, we miss a few cases and
there wasn't a principled reason we got it. We should at least test
this. v8 already has tests for this pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222607 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes the self-host fail. Note that this commit activates dominator
analysis in the combiner by default (like the original commit did).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222590 91177308-0d34-0410-b5e6-96231b3b80d8
This s_mov_b32 will write to a virtual register from the M0Reg
class and all the ds instructions now take an extra M0Reg explicit
argument.
This change is necessary to prevent issues with the scheduler
mixing together instructions that expect different values in the m0
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222583 91177308-0d34-0410-b5e6-96231b3b80d8
filler such as if delay slot filler have to put NOP instruction into the
delay slot of microMIPS BEQ or BNE instruction which uses the register $0,
then instead of emitting NOP this instruction is replaced by the corresponding
microMIPS compact branch instruction, i.e. BEQZC or BNEZC.
Differential Revision: http://reviews.llvm.org/D3566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222580 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a feature flag to avoid unaligned 32-byte load/store AVX codegen
for Sandy Bridge and Ivy Bridge. There is no functionality change intended for
those chips. Previously, the absence of AVX2 was being used as a proxy to detect
this feature. But that hindered codegen for AVX-enabled AMD chips such as btver2
that do not have the 32-byte unaligned access slowdown.
Performance measurements are included in PR21541 ( http://llvm.org/bugs/show_bug.cgi?id=21541 ).
Differential Revision: http://reviews.llvm.org/D6355
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222544 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle lowering to allow much better blend matching.
Specifically, with the new structure the code seems clearer to me and we
correctly can hit the cases where merging two 128-bit lanes is a clear
win and can be shuffled cheaply afterward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222539 91177308-0d34-0410-b5e6-96231b3b80d8
a bunch more improvements.
Non-lane-crossing is fine, the key is that lane merging only makes sense
for single-input shuffles. Not sure why I got so turned around here. The
code all works, I was just using the wrong model for it.
This only updates v4 and v8 lowering. The v16 and v32 lowering requires
restructuring the entire check sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222537 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, the DAGCombiner only tried to convert build_vector dag nodes
into shuffles if all operands were either extract_vector_elt or undef.
This patch improves that logic and teaches the DAGCombiner how to deal with
build_vector dag nodes where one or more operands are zero. A build_vector
dag node with some zero operands is turned into a shuffle only if the resulting
shuffle mask is legal for the target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222536 91177308-0d34-0410-b5e6-96231b3b80d8
lanes.
By special casing these we can often either reduce the total number of
shuffles significantly or reduce the number of (high latency on Haswell)
AVX2 shuffles that potentially cross 128-bit lanes. Even when these
don't actually cross lanes, they have much higher latency to support
that. Doing two of them and a blend is worse than doing a single insert
across the 128-bit lanes to blend and then doing a single interleaved
shuffle.
While this seems like a narrow case, it kept cropping up on me and the
difference is *huge* as you can see in many of the test cases. I first
hit this trying to perfectly fix the interleaving shuffle patterns used
by Halide for AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222533 91177308-0d34-0410-b5e6-96231b3b80d8
merging 128-bit subvectors and also shuffling all the elements of those
subvectors. Currently we generate pretty bad code for many of these, but
I'm testing a patch that should dramatically improve this in addition to
making the shuffle lowering robust to other changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222525 91177308-0d34-0410-b5e6-96231b3b80d8
This mirrors r222331, which enabled SeparateConstOffsetFromGEP on AArch64, in
the PowerPC backend. Yields, on a POWER7 machine, a 30% speedup on
SingleSource/Benchmarks/Shootout/nestedloop (this might just be from LICM,
there is a store moved out of the inner loop) and a potential speedup on
MultiSource/Benchmarks/mediabench/mpeg2/mpeg2dec/mpeg2decode. Regardless, it
makes some code look cleaner, and synchronizing the backends in this regard
seems like a generally good thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222504 91177308-0d34-0410-b5e6-96231b3b80d8
The alloca's type is irrelevant, only those types which are used in a
load or store of the exact size of the slice should be considered.
This manifested as an assertion failure when we compared the various
types: we had a size mismatch.
This fixes PR21480.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222499 91177308-0d34-0410-b5e6-96231b3b80d8
Currently LoopUnroll generates a prologue loop before the main loop
body to execute first N%UnrollFactor iterations. Also, this loop is
used if trip-count can overflow - it's determined by a runtime check.
However, we've been mistakenly optimizing this loop to a linear code for
UnrollFactor = 2, not taking into account that it also serves as a safe
version of the loop if its trip-count overflows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222451 91177308-0d34-0410-b5e6-96231b3b80d8
Windows itanium targets the MSVCRT, and the stack probe symbol is provided by
MSVCRT. This corrects the emission of stack probes on i686-windows-itanium.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222439 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222142. This is causing/exposing an execution-time regression
in spec2006/gcc and coremark on AArch64/A57/Ofast.
Conflicts:
test/Transforms/Reassociate/optional-flags.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222398 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves the lowering of v4f32 and v4i32 build_vector dag nodes
that are known to have at least two non-zero elements.
With this patch, a build_vector that performs a blend with zero is
converted into a shuffle. This is done to let the shuffle legalizer expand
the dag node in a optimal way. For example, if we know that a build_vector
performs a blend with zero, we can try to lower it as a movq/blend instead of
always selecting an insertps.
This patch also improves the logic that lowers a build_vector into a insertps
with zero masking. See for example the extra test cases added to test sse41.ll.
Differential Revision: http://reviews.llvm.org/D6311
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222375 91177308-0d34-0410-b5e6-96231b3b80d8
A register operand that has a common sub-class with its instruction's
defined register class is not always legal. For example,
SReg_32 and M0Reg both have a common sub-class, but we can't
use an SReg_32 in instructions that expect a M0Reg.
This prevents the llvm.SI.sendmsg.ll test from failing when the fold
operand pass is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222368 91177308-0d34-0410-b5e6-96231b3b80d8
When the BasicBlock containing the return instrution has a PHI with 2
incoming values, FoldReturnIntoUncondBranch will remove the no longer
used incoming value and remove the no longer needed phi as well. This
leaves us with a BB that no longer has a PHI, but the subsequent call
to FoldReturnIntoUncondBranch from FoldReturnAndProcessPred will not
remove the return instruction (which still uses the result of the call
instruction). This prevents EliminateRecursiveTailCall to remove
the value, as it is still being used in a basicblock which has no
predecessors.
The basicblock can not be erased on the spot, because its iterator is
still being used in runTRE.
This issue was exposed when removing the threshold on size for lifetime
marker insertion for named temporaries in clang. The testcase is a much
reduced version of peelOffOuterExpr(const Expr*, const ExplodedNode *)
from clang/lib/StaticAnalyzer/Core/BugReporterVisitors.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222354 91177308-0d34-0410-b5e6-96231b3b80d8
This patch builds on http://reviews.llvm.org/D5598 to perform byte rotation shuffles (lowerVectorShuffleAsByteRotate) on pre-SSSE3 (palignr) targets - pre-SSSE3 is only enabled on i8 and i16 vector targets where it is a more definite performance gain.
I've also added a separate byte shift shuffle (lowerVectorShuffleAsByteShift) that makes use of the ability of the SLLDQ/SRLDQ instructions to implicitly shift in zero bytes to avoid the need to create a zero register if we had used palignr.
Differential Revision: http://reviews.llvm.org/D5699
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222340 91177308-0d34-0410-b5e6-96231b3b80d8
AliasSetTracker::addUnknown may create an AliasSet devoid of pointers
just to contain an instruction if no suitable AliasSet already exists.
It will then AliasSet::addUnknownInst and we will be done.
However, it's possible for addUnknown to choose an existing AliasSet to
addUnknownInst.
If this were to occur, we are in a bit of a pickle: removing pointers
from the AliasSet can cause the entire AliasSet to become destroyed,
taking our unknown instructions out with them.
Instead, keep track whether or not our AliasSet has any unknown
instructions.
This fixes PR21582.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222338 91177308-0d34-0410-b5e6-96231b3b80d8
SeparateConstOffsetFromGEP can gives more optimizaiton opportunities related to GEPs, which benefits EarlyCSE
and LICM. By enabling these passes we can have better address calculations and generate a better addressing
mode. Some SPEC 2006 benchmarks (astar, gobmk, namd) have obvious improvements on Cortex-A57.
Reviewed in http://reviews.llvm.org/D5864.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222331 91177308-0d34-0410-b5e6-96231b3b80d8
It printed out base relocation table header as table entry.
This patch also makes llvm-readobj to not skip ABSOLUTE entries
becuase it was confusing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222299 91177308-0d34-0410-b5e6-96231b3b80d8
This partially makes up for not having address spaces
used for alias analysis in some simple cases.
This is not yet enabled by default so shouldn't change anything yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222286 91177308-0d34-0410-b5e6-96231b3b80d8
Under many circumstances the stack is not 32-byte aligned, resulting in the use of the vmovups/vmovupd/vmovdqu instructions when inserting ymm reloads/spills.
This minor patch adds these instructions to the isFrameLoadOpcode/isFrameStoreOpcode helpers so that they can be correctly identified and not be treated as folded reloads/spills.
This has also been noticed by http://llvm.org/bugs/show_bug.cgi?id=18846 where it was causing redundant spills - I've added a reduced test case at test/CodeGen/X86/pr18846.ll
Differential Revision: http://reviews.llvm.org/D6252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222281 91177308-0d34-0410-b5e6-96231b3b80d8
shift-right for booleans (i1).
Arithmetic shift-right immediate with sign-/zero-extensions also works for
boolean values. Update the assert and the test cases to reflect that fact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222272 91177308-0d34-0410-b5e6-96231b3b80d8
shift-right for booleans (i1).
Logical shift-right immediate with sign-/zero-extensions also works for boolean
values. Update the assert and the test cases to reflect that fact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222270 91177308-0d34-0410-b5e6-96231b3b80d8
We would attempt to replace an frem's operand with the same operand.
This would cause InstCombine to think real work was done, causing
InstCombine to enter an infinite loop.
This fixes the second part of PR21576.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222265 91177308-0d34-0410-b5e6-96231b3b80d8
Shifts also perform sign-/zero-extends to larger types, which requires us to emit
an integer extend instead of a simple COPY.
Related to PR21594.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222257 91177308-0d34-0410-b5e6-96231b3b80d8
This should expose more of the actually used VALU
instructions to the machine optimization passes.
This also should help getting i1 handling into a better state.
For not entirly understood reasons, this fixes the split-scalar-i64-add.ll
test where a 64-bit add would only partially be moved to the VALU
resulting in use of undefined VCC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222256 91177308-0d34-0410-b5e6-96231b3b80d8
flags are cleared. The reassociation pass was just reordering the leaf nodes
in the previous test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222250 91177308-0d34-0410-b5e6-96231b3b80d8
This change emits a COPY for a shift-immediate with a "zero" shift value.
This fixes PR21594 where we emitted a shift instruction with an incorrect
immediate operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222247 91177308-0d34-0410-b5e6-96231b3b80d8