causing a nasty array bound error later.
2. Fix silly typo causing logical shift of unsigned long to use
SRL instead of SRLX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7330 91177308-0d34-0410-b5e6-96231b3b80d8
info (since multiple reg types may share the same reg class).
(2) Remove machine-specific regalloc. methods that are no longer needed.
In particular, arguments and return value from a call do not need
machine-specific code for allocation.
(3) Rename TargetRegInfo::getRegType variants to avoid unintentional
overloading when an include file is omitted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7329 91177308-0d34-0410-b5e6-96231b3b80d8
found to consider regType info (since multiple reg types may share
the same reg class, e.g., single and double on Sparc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7327 91177308-0d34-0410-b5e6-96231b3b80d8
now works in instructions which require a 2-bit or 3-bit INTcc code.
Incidentally, that means that the representation of INTcc registers is now the
same in both integer and FP instructions. Thus, code became much simpler and
cleaner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7185 91177308-0d34-0410-b5e6-96231b3b80d8
allow, i.e. make a sequence of instructions to enable an indirect call using
jump-and-link and 2 temporary registers (which we save and ultimately restore).
Warning: if the delay slot of a function call is used to do meaningful work and
not just a NOP, this behavior is incorrect. However, the Sparc backend does not
yet utilize the delay slots effectively, so it is not necessary to make an
overly complicated algorithm for something that's not used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7178 91177308-0d34-0410-b5e6-96231b3b80d8
* FP double registers are now coded correctly
* Removed function which converted registers based on register types, it was
broken (because regTypes are broken)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7175 91177308-0d34-0410-b5e6-96231b3b80d8
(1) Cannot use ANDN(ot), ORN, and XORN for boolean ops, only bitwise ops.
(2) Conditional move instructions must distinguish signed and unsigned
condition codes, e.g., MOVLE vs. MOVLEU.
(3) Conditional-move-on-register was using the cond-move-on-cc opcodes,
which produces a valid-looking instruction with bogus registers!
(4) Here's a really cute one: dividing-by-2^k for negative numbers needs to
add 2^k-1 before shifting, not add 1 after shifting. Sadly, these
are the same when k=0 so our poor test case worked fine.
(5) Casting between signed and unsigned values was not correct:
completely reimplemented.
(6) Zero-extension on unsigned values was bogus: I was only doing the
SRL and not the SLLX before it. Don't know WHAT I was thinking!
(7) And the most important class of changes: Sign-extensions on signed values.
Signed values are not sign-extended after ordinary operations,
so they must be sign-extended before the following cases:
-- passing to an external or unknown function
-- returning from a function
-- using as operand 2 of DIV or REM
-- using as either operand of condition-code setting operation
(currently only SUBCC), with smaller than 32-bit operands
Also, a couple of improvements:
(1) Fold cast-to-bool into Not(bool). Need to do this for And, Or, XOR also.
(2) Convert SetCC-Const into a conditional-move-on-register (case 41)
if the constant is 0. This was only being done for branch-on-SetCC-Const
when the branch is folded with the SetCC-Const.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7159 91177308-0d34-0410-b5e6-96231b3b80d8
(1) An int CC live range must be spilled if there are any interferences,
even if no other "neighbour" in the interf. graph has been allocated
that reg. yet. This is actually true of any class with only one reg!
(2) SparcIntCCRegClass::colorIGNode sets the color even if the LR must
be spilled so that the machine-independent spill code doesn't have to
make the machine-dependent decision of which CC name to use based on
operand type: %xcc or %icc. (These are two halves of the same
register.)
(3) LR->isMarkedForSpill() is no longer the same as LR->hasColor().
These should never have been the same, and this is necessary now for #2.
(4) All RDCCR and WRCCR instructions are directly generated with the
phony number for %ccr so that EmitAssembly/EmitBinary doesn't have to
deal with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7152 91177308-0d34-0410-b5e6-96231b3b80d8
(1) An int CC live range must be spilled if there are any interferences,
even if no other "neighbour" in the interf. graph has been allocated
that reg. yet. This is actually true of any class with only one reg!
(2) SparcIntCCRegClass::colorIGNode sets the color even if the LR must
be spilled so that the machine-independent spill code doesn't have to
make the machine-dependent decision of which CC name to use based on
operand type: %xcc or %icc. (These are two halves of the same register.)
(3) LR->isMarkedForSpill() is no longer the same as LR->hasColor().
These should never have been the same, and this is necessary now for #2.
(4) All RDCCR and WRCCR instructions are directly generated with the
phony number for %ccr so that EmitAssembly/EmitBinary doesn't have to
deal with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7151 91177308-0d34-0410-b5e6-96231b3b80d8
integer overflow):
We need to use %icc and not %xcc for comparisons on 32-bit or smaller
integer values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7111 91177308-0d34-0410-b5e6-96231b3b80d8
correct: empirically, "regType" is wrong for a number of registers. Thus, one
can only rely on the "regClass" to figure out what kind of register one is
dealing with.
This change switches to using only "regClass" and adds a few extra DEBUG() print
statements and a few clean-ups in comments and code, mostly minor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7103 91177308-0d34-0410-b5e6-96231b3b80d8
the TableGen descriptions; all unset bits are thus errors.
* As a result, found and fixed instructions where some operands were not
actually assigned into the right portion of the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7074 91177308-0d34-0410-b5e6-96231b3b80d8
area to avoid using up precious stack space within the 4095 offset limit
from %fp. Such objects that would themselves live at a large offset
were being put there already so this is a simple change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7066 91177308-0d34-0410-b5e6-96231b3b80d8
deletes it, but we were merrily trying to fix the operands of that
instruction anyway! Instead, fix the replacement instruction.
(2) An Improvement: Check for and extract global values in all operands,
not just in known pointer operands. For example, they can occur in
call arguments, and probably other unforeseeable places as well.
This also eliminates the special-case handling of Load and Store.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7053 91177308-0d34-0410-b5e6-96231b3b80d8
not just an Instruction*, at least in one unfortunate case:
the first operand to the va_arg instruction.
Modify ValueToDefVecMap to map from Value*, not Instruction*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7052 91177308-0d34-0410-b5e6-96231b3b80d8
(1) select: Ok to convert a pointer to a float or double.
(2) regalloc: Some MachineInstr* for caller-saving code before a call
were being inserted before and after the call!
(3) Don't insert the caller-saving instructions in the
MachineCodeForInstruction for the Call instruction.
*All* instructions generated by register allocation need to be
recorded in those maps, but it needs to be done uniformly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7051 91177308-0d34-0410-b5e6-96231b3b80d8
Move LowerAllocations, PrintFunction, and SymbolStripping passes, and
the corresponding -disable-strip and -d options, over here to the SPARC
target-specific bits of llc. Rename -d to -dump-asm.
tools/llc/Makefile:
Reindent. Add x86 library so that llc compiles again.
tools/llc/llc.cpp:
Remove support for running arbitrary optimization passes. Use opt instead.
Remove LowerAllocations, PrintFunction, and SymbolStripping passes, as noted
above.
Allow user to select a backend (x86 or SPARC); default to guessing from
the endianness/pointer size of the input bytecode file.
Fix typos.
Delete empty .s file and exit with error status if target does not support
static compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6776 91177308-0d34-0410-b5e6-96231b3b80d8
SETTING the operand to be an immediate or have verified that one of the operands
is really a SignExtended or Unextended immediate value already, which warrants
an 'i' opcode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6662 91177308-0d34-0410-b5e6-96231b3b80d8
* BPA and BPN do not take a %cc register as a parameter
* SLL/SRL/SRA{r,i}5 are there for a reason - they are ONLY 32-bit instructions
* Likewise, SLL/SRL/SRAX{r,i}6 are only 64-bit
* Added WRCCR{r,i} opcodes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6655 91177308-0d34-0410-b5e6-96231b3b80d8
* Removed instruction scheduling as it is too slow to run in a JIT environment
* Removed other passes because they aren't necessary and can slow JIT down
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6652 91177308-0d34-0410-b5e6-96231b3b80d8
Special cases: STFSRx and STXFSRx - they operate on predefined rd=0 or rd=1, and
expect %fsr as the parameter in assembly. They are disabled (since not used)
until an encoding, both for code generation and output, is chosen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6619 91177308-0d34-0410-b5e6-96231b3b80d8
Update file comment to contain a bunch of the overview mapping-info
documentation previously buried within the file.
Remove some unnecessary include/using stmts.
Rename pass to MappingInfoCollector.
Rewrite a lot of it so it doesn't use global instance variables and so
it outputs into MappingInfo objects and then dumps those out, instead of going
straight to an assembly file.
Change name of factory to getMappingInfoCollector.
Fold prologue & epilogue writers into MappingInfo methods.
lib/Target/Sparc/FInfo.cpp:
Correct file comment to reflect above change
lib/Target/Sparc/Sparc.cpp:
Change name of factory to getMappingInfoCollector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6617 91177308-0d34-0410-b5e6-96231b3b80d8
in Emitter.cpp, just convert the Sparc version of the constant pool into
what's already supported and inter-operate.
* Implemented a first pass at lazy function resolution in the JITResolver. That
required adding a SparcV9CodeEmitter pointer to simplify generating
bit-patterns of the instructions.
* SparcV9CodeEmitter now creates and destroys static TheJITResolver, which makes
sense because the SparcV9CodeEmitter is the only user of TheJITResolver, and
lives for the entire duration of the JIT (via PassManager which lives in VM).
* Changed all return values in the JITResolver to uint64_t because of the 64-bit
Sparc architecture.
* Added a new version of getting the value of a GlobalValue in the
SparcV9CodeEmitter, which now works for already-generated functions (JITted or
library functions).
* Removed little-used and unused functions, cleaning up the internal view of the
SparcV9CodeEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6612 91177308-0d34-0410-b5e6-96231b3b80d8
the loop, and in both cases. In the first case, it is a VReg that is a constant
so it may be actually converted to a constant. In the second case, it is already
a constant, but then if it doesn't change its type (e.g. to become a register
and have the value loaded from memory if it is too large to live in its
instruction field), we must change the opcode BEFORE the 'continue', otherwise
we miss the opportunity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6602 91177308-0d34-0410-b5e6-96231b3b80d8
rewriting it. I also vacuumed out all the commented-out code and
inaccurate comments, etc.
(We need to put the mapping information in a data structure so that we can
pass it out to the JIT, instead of automagically converting it to .byte
directives.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6574 91177308-0d34-0410-b5e6-96231b3b80d8
they prefer the destination register to be last. Thus, two new classes were made
for them that accomodate for having this layout of operands (F3_1rd, F3_2rd).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6564 91177308-0d34-0410-b5e6-96231b3b80d8
