Now debug_inlined section is covered by TAI->doesDwarfUsesInlineInfoSection(), which is false by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68964 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68961 91177308-0d34-0410-b5e6-96231b3b80d8
the subreg field to 0, since the subreg field is only used
for virtual register subregs. This doesn't change
current functionality; it just eliminates bogus noise from
debug output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68955 91177308-0d34-0410-b5e6-96231b3b80d8
to support C99 inline, GNU extern inline, etc. Related bugzilla's
include PR3517, PR3100, & PR2933. Nothing uses this yet, but it
appears to work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68940 91177308-0d34-0410-b5e6-96231b3b80d8
Create debug_inlined dwarf section using these information. This info is used by gdb, at least on Darwin, to enable better experience debugging inlined functions. See DwarfWriter.cpp for more information on structure of debug_inlined section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68847 91177308-0d34-0410-b5e6-96231b3b80d8
1. Sinking would crash when the first instruction of a block was
sunk due to iterator problems.
2. Instructions could be sunk to their current block, causing an
infinite loop.
This fixes PR3968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68787 91177308-0d34-0410-b5e6-96231b3b80d8
the key. This will cause it to create a new std::string, which isn't
wanted. Instead, pass back the "const char*". Modify the EmitString() method to
take a "const char*".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68741 91177308-0d34-0410-b5e6-96231b3b80d8
register destinations that are tied to source operands. The
TargetInstrDescr::findTiedToSrcOperand method silently fails for inline
assembly. The existing MachineInstr::isRegReDefinedByTwoAddr was very
close to doing what is needed, so this revision makes a few changes to
that method and also renames it to isRegTiedToUseOperand (for consistency
with the very similar isRegTiedToDefOperand and because it handles both
two-address instructions and inline assembly with tied registers).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68714 91177308-0d34-0410-b5e6-96231b3b80d8
in addition to ZERO_EXTEND and SIGN_EXTEND. Fix a bug in the
way it checked for live-out values, and simplify the way it
find users by using SDNode::use_iterator's (relatively) new
features. Also, make it slightly more permissive on targets
with free truncates.
In SelectionDAGBuild, avoid creating ANY_EXTEND nodes that are
larger than necessary. If the target's SwitchAmountTy has
enough bits, use it. This exposes the truncate to optimization
early, enabling more optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68670 91177308-0d34-0410-b5e6-96231b3b80d8
eagerly. This helps avoid CopyToReg nodes in some cases where they
aren't needed, and also helps subsequent optimizer heuristics
in cases where the extra nodes would cause the node to appear
to have multiple results. This doesn't have a significant impact
currently; it'll help an upcoming change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68667 91177308-0d34-0410-b5e6-96231b3b80d8
avoiding sign extension for the top octet. For "negative" chars, we'd print
stuff like:
.asciz "\702...
now we print:
.asciz "\302...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68577 91177308-0d34-0410-b5e6-96231b3b80d8
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68576 91177308-0d34-0410-b5e6-96231b3b80d8
Note that these are distinct from TargetInstrInfo::INSERT_SUBREG
and TargetInstrInfo::EXTRACT_SUBREG, which are used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68355 91177308-0d34-0410-b5e6-96231b3b80d8
entered via fall-through. Don't miss fallthroughs from blocks
terminated by conditional branches. Also, move
isOnlyReachableByFallthrough out of line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68129 91177308-0d34-0410-b5e6-96231b3b80d8
e.g.
%reg1024<def> = MOV r1
%reg1025<def> = ADD %reg1024, %reg1026
r0 = MOV %reg1025
If it's not possible / profitable to commute ADD, then turning ADD into a LEA saves a copy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68065 91177308-0d34-0410-b5e6-96231b3b80d8
x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67917 91177308-0d34-0410-b5e6-96231b3b80d8
Also fixes SDISel so it *does not* force promote return value if the function is not marked signext / zeroext.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67701 91177308-0d34-0410-b5e6-96231b3b80d8
stoppoint nodes around until Legalize; doing this
imposed an ordering on a sequence of loads that
came from different lines, interfering with scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67692 91177308-0d34-0410-b5e6-96231b3b80d8
help out the register pressure reduction heuristics in the case of
nodes with multiple uses. Currently this uses very conservative
heuristics, so it doesn't have a broad impact, but in cases where it
does help it can make a big difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67586 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. allocating for GR32, bh is not used, updating bl spill weight.
bl should get the same spill weight otherwise it will be choosen
as a spill candidate since spilling bh doesn't make ebx available.
This fix PR2866.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67574 91177308-0d34-0410-b5e6-96231b3b80d8
same as a normal i80 {low64, high16} rather
than its own {high64, low16}. A depressing number
of places know about this; I think I got them all.
Bitcode readers and writers convert back to the old
form to avoid breaking compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67562 91177308-0d34-0410-b5e6-96231b3b80d8
a data dependency on the load node, so it really needs a
data-dependence edge to the load node, even if the load previously
existed.
And add a few comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67554 91177308-0d34-0410-b5e6-96231b3b80d8
%RAX<def> = ...
%RAX<def> = SUBREG_TO_REG 0, %EAX:3<kill>, 3
The first def is defining RAX, not EAX so the top bits were not zero-extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67511 91177308-0d34-0410-b5e6-96231b3b80d8
- Make type declarations match the struct/class keyword of the definition.
- Move AddSignalHandler into the namespace where it belongs.
- Correctly call functions from template base.
- Some other small changes.
With this patch, LLVM and Clang should build properly and with far less noise under VS2008.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67347 91177308-0d34-0410-b5e6-96231b3b80d8
and expanding a bit convert (PR3711). In both cases, we extract the
valid part of the widen vector and then do the conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67175 91177308-0d34-0410-b5e6-96231b3b80d8
size by the array amount as an i32 value instead of promoting from
i32 to i64 then doing the multiply. Not doing this broke wrap-around
assumptions that the optimizers (validly) made. The ultimate real
fix for this is to introduce i64 version of alloca and remove mallocinst.
This fixes PR3829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67093 91177308-0d34-0410-b5e6-96231b3b80d8
vector shuffle mask. Forced the mask to be built using i32. Note: this will
be irrelevant once vector_shuffle no longer takes a build vector for the
shuffle mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67076 91177308-0d34-0410-b5e6-96231b3b80d8
U test/CodeGen/X86/2009-03-13-PHIElimBug.ll
D test/CodeGen/X86/2009-03-16-PHIElimInLPad.ll
U lib/CodeGen/PHIElimination.cpp
r67049 was causing this failure:
Running /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/dg.exp ...
FAIL: /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll for PR3784
Failed with exit(1) at line 1
while running: llvm-as < /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll | llc -march=x86 | /usr/bin/grep -A 2 {call f} | /usr/bin/grep movl
child process exited abnormally
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67051 91177308-0d34-0410-b5e6-96231b3b80d8
how invokes are set up. The fix could be disturbed by
register copies coming after the EH_LABEL, and also didn't
behave quite right when it was the invoke result that
was used in a phi node. Also (see new testcase) fix
another phi elimination bug while there: register copies
in the landing pad need to come after the EH_LABEL, because
that's where execution branches to when unwinding. If they
come before the EH_LABEL then they will never be executed...
Also tweak the original testcase so it doesn't use a no-longer
existing counter.
The accumulated phi elimination changes fix two of seven Ada
testsuite failures that turned up after landing pad critical
edge splitting was turned off. So there's probably more to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67049 91177308-0d34-0410-b5e6-96231b3b80d8
if FPConstant is legal because if the FPConstant doesn't need to be stored
in a constant pool, the transformation is unlikely to be profitable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66994 91177308-0d34-0410-b5e6-96231b3b80d8
