LHS is a foldable load, then LHS and RHS are swapped
and SetCCOpcode is changed to SETUGT. But the later
code is expecting operands to be the wrong way round
for SETUGT, but they are not in this case, resulting
in an inverted compare. The solution is to move the
load normalization before the correction for SETUGT.
This bug was tickled by LegalizeTypes which happened
to legalize the testcase slightly differently to
LegalizeDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58092 91177308-0d34-0410-b5e6-96231b3b80d8
in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57885 91177308-0d34-0410-b5e6-96231b3b80d8
Where previously LLVM might emit code like this:
ucomisd %xmm1, %xmm0
setne %al
setp %cl
orb %al, %cl
jne .LBB4_2
it now emits this:
ucomisd %xmm1, %xmm0
jne .LBB4_2
jp .LBB4_2
It has fewer instructions and uses fewer registers, but it does
have more branches. And in the case that this code is followed by
a non-fallthrough edge, it may be followed by a jmp instruction,
resulting in three branch instructions in sequence. Some effort
is made to avoid this situation.
To achieve this, X86ISelLowering.cpp now recognizes FCMP_OEQ and
FCMP_UNE in lowered form, and replace them with code that emits
two branches, except in the case where it would require converting
a fall-through edge to an explicit branch.
Also, X86InstrInfo.cpp's branch analysis and transform code now
knows now to handle blocks with multiple conditional branches. It
uses loops instead of having fixed checks for up to two
instructions. It can now analyze and transform code generated
from FCMP_OEQ and FCMP_UNE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57873 91177308-0d34-0410-b5e6-96231b3b80d8
the copy instruction from the instruction list before asking the
target to create the new instruction. This gets the old instruction
out of the way so that it doesn't interfere with the target's
rematerialization code. In the case of x86, this helps it find
more cases where EFLAGS is not live.
Also, in the X86InstrInfo.cpp, teach isSafeToClobberEFLAGS to check
to see if it reached the end of the block after scanning each
instruction, instead of just before. This lets it notice when the
end of the block is only two instructions away, without doing any
additional scanning.
These changes allow rematerialization to clobber EFLAGS in more
cases, for example using xor instead of mov to set the return value
to zero in the included testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57872 91177308-0d34-0410-b5e6-96231b3b80d8
for strange asm conditions earlier. In this case, we have a
double being passed in an integer reg class. Convert to like
sized integer register so that we allocate the right number
for the class (two i32's for the f64 in this case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57862 91177308-0d34-0410-b5e6-96231b3b80d8
the previous patch this one actually passes make check.
"Fix PR2356 on PowerPC: if we have an input and output that are tied together
that have different sizes (e.g. i32 and i64) make sure to reserve registers for
the bigger operand."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57771 91177308-0d34-0410-b5e6-96231b3b80d8
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57748 91177308-0d34-0410-b5e6-96231b3b80d8
have an unreachable block in a function. This was triggering the assert. This is
a horrid hack to cover this up.
Oh! for a good debug info architecture!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57714 91177308-0d34-0410-b5e6-96231b3b80d8
in 32-bit mode instead of assigning a register pair. This has nothing to
do with PR2356, but I happened to notice it while working on it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57704 91177308-0d34-0410-b5e6-96231b3b80d8
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57663 91177308-0d34-0410-b5e6-96231b3b80d8
shift counts, and patterns that match dynamic shift counts
when the subtract is obscured by a truncate node.
Add DAGCombiner support for recognizing rotate patterns
when the shift counts are defined by truncate nodes.
Fix and simplify the code for commuting shld and shrd
instructions to work even when the given instruction doesn't
have a parent, and when the caller needs a new instruction.
These changes allow LLVM to use the shld, shrd, rol, and ror
instructions on x86 to replace equivalent code using two
shifts and an or in many more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57662 91177308-0d34-0410-b5e6-96231b3b80d8
to find opportunities for store-to-load forwarding or load CSE,
in the same way that visitStore scans back to do DSE. Also, define
a new helper function for testing whether the addresses of two
memory accesses are known to have the same value, and use it in
both visitStore and visitLoad.
These two changes allow instcombine to eliminate loads in code
produced by front-ends that frequently emit obviously redundant
addressing for memory references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57608 91177308-0d34-0410-b5e6-96231b3b80d8
integer type. Invalid things like 'float 42' are now rejected by the
semantic analysis in the productions not the parser. This fixes PR2733.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57560 91177308-0d34-0410-b5e6-96231b3b80d8
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57542 91177308-0d34-0410-b5e6-96231b3b80d8
- Renumber fcmp predicates to match their icmp counterparts.
- Try swapping operands to expose more optimization opportunities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57513 91177308-0d34-0410-b5e6-96231b3b80d8
create a new DAG node to represent the new shift to keep the
DAG consistent, even though it'll almost always be folded into
the address.
If a user of the resulting address has multiple uses, the
nodes may get revisited by a later MatchAddress call, in which
case DAG inconsistencies do matter.
This fixes PR2849.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57465 91177308-0d34-0410-b5e6-96231b3b80d8
not built with 64 bit support. Since this test
passes without -m64 on x86-32-linux, just remove
the -m64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57462 91177308-0d34-0410-b5e6-96231b3b80d8
parameters instead of raw Constants. This prevents the constants from
being selected by the isel pass, fixing PR2735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57385 91177308-0d34-0410-b5e6-96231b3b80d8
instead.
So now: -fast-isel or -fast-isel=true enable fast-isel, and
-fast-isel=false disables it. Fast-isel is also on by default
with -fast, and off by default otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57270 91177308-0d34-0410-b5e6-96231b3b80d8
beware of the 42000 leaks reported by valgrind in the Constant.cpp + Type.cpp files. it needs fixing IMHO
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57245 91177308-0d34-0410-b5e6-96231b3b80d8
are Inexact. (These are not Inexact as defined
by IEEE754, but that seems like a reasonable way
to abstract what happens: information is lost.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57218 91177308-0d34-0410-b5e6-96231b3b80d8
This includes not marking a GEP involving a vector as unsafe, but only when it
has all zero indices. This allows scalarrepl to work in a few more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57177 91177308-0d34-0410-b5e6-96231b3b80d8
Before there were two problems: (1) configure
turned "obj-c++" into "obj" in the langs line;
(2) the dejagnu library called it objc++ not
obj-c++.
Now the problem is that some of these tests don't
pass!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57167 91177308-0d34-0410-b5e6-96231b3b80d8
shifting and masking inside a bswap expr. This allows it to handle
the cases from PR2842, which involve the intermediate 'or'
expressions being shifted, not just the input value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57095 91177308-0d34-0410-b5e6-96231b3b80d8
when deciding whether to mark a function readnone/readonly.
Since the pass is currently run before SROA, this may be
quite helpful. Requested by Chris on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57050 91177308-0d34-0410-b5e6-96231b3b80d8
was setting kill flags on tied uses in two-address instructions.
The kill flags were causing the allocator to think it could
allocate the use and its tied def in different registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57039 91177308-0d34-0410-b5e6-96231b3b80d8
"If a re-materializable instruction has a register
operand, the spiller will change the register operand's
spill weight to HUGE_VAL to avoid it being spilled.
However, if the operand is already in the queue ready
to be spilled, avoid re-materializing it".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56837 91177308-0d34-0410-b5e6-96231b3b80d8
I originally made this script to show that scalarrepl didn't support them, but
it turned out it does. Better to still add the testcase then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56781 91177308-0d34-0410-b5e6-96231b3b80d8
meaning sse_regparm (i.e. float/double values go
in XMM0 instead of ST0). Update documentation
to reflect reality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56619 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately this means removing one regression test
of GlobalsModRef because I couldn't work out how to
perform it without MarkModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56342 91177308-0d34-0410-b5e6-96231b3b80d8
can get the readnone/readonly attributes, and gives them it.
The plan is to remove markmodref (which did the same thing
by querying GlobalsModRef) and delete the analogous
functionality from GlobalsModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56341 91177308-0d34-0410-b5e6-96231b3b80d8
description says it does), not just when -analyze is
used as well. This means printing to stderr, so adjust
some tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56337 91177308-0d34-0410-b5e6-96231b3b80d8
with an earlyclobber operand elsewhere. Propagate
this bit and the earlyclobber bit through SDISel.
Change linear-scan RA not to allocate regs in a way
that conflicts with an earlyclobber. See also comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56290 91177308-0d34-0410-b5e6-96231b3b80d8
- Recognize expressions like "x > -1 ? x : 0" as min/max and turn them
into expressions like "x < 0 ? 0 : x", which is easily recognizable
as a min/max operation.
- Refrain from folding expression like "y/2 < 1" to "y < 2" when the
comparison is being used as part of a min or max idiom, like
"y/2 < 1 ? 1 : y/2". In that case, the division has another use, so
folding doesn't eliminate it, and obfuscates the min/max, making it
harder to recognize as a min/max operation.
These benefit ScalarEvolution, CodeGen, and anything else that wants to
recognize integer min and max.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56246 91177308-0d34-0410-b5e6-96231b3b80d8
bitcode reader/writer as follows:
- add and use new bitcode FUNC_CODE_INST_VSELECT to handle the llvm
select opcode using either i1 or [N x i1] as the selector.
- retain old BITCODE FUNC_CODE_INST_SELECT in the bitcode reader to
handle select on i1 for backwards compatibility with existing bitcode
files.
- re-enable the vector-select.ll test program.
Also, rename the recently added bitcode opcode FUNC_CODE_INST_VCMP to
FUNC_CODE_INST_CMP2 and make the bitcode writer use it to handle
fcmp/icmp on scalars or vectors. In the bitcode writer, use
FUNC_CODE_INST_CMP for vfcmp/vicmp only. In the bitcode reader, have
FUNC_CODE_INST_CMP handle icmp/fcmp returning bool, for backwards
compatibility with existing bitcode files.
Patch by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56233 91177308-0d34-0410-b5e6-96231b3b80d8
cases. See the comment above OptimizeSMax for the full story, and
the testcase for an example. This cancels out a pessimization
commonly attributed to indvars, and will allow us to lift some of
the artificial throttles in indvars, rather than add new ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56230 91177308-0d34-0410-b5e6-96231b3b80d8
its callers to emit a space character before calling it when a
space is needed.
This fixes several spurious whitespace issues in
ScalarEvolution's debug dumps. See the test changes for
examples.
This also fixes odd space-after-tab indentation in the output
for switch statements, and changes calls from being printed like
this:
call void @foo( i32 %x )
to this:
call void @foo(i32 %x)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56196 91177308-0d34-0410-b5e6-96231b3b80d8
vr2 = OR vr0, vr1
=>
vr2 = OR vr1, vr1 // after coalescing vr0 with vr1
Update the value# of the destination register with the copy instruction if that happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56165 91177308-0d34-0410-b5e6-96231b3b80d8
getelementptr indices, inserting an explicit cast if necessary.
This helps expose the sign-extension operation to other optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56133 91177308-0d34-0410-b5e6-96231b3b80d8
vr1024 = extract_subreg vr1025, 1
...
vr1024 = mov8rr AH
If vr1024 is coalesced with AH, the extract_subreg is now illegal since AH does not have a super-reg whose sub-register 1 is AH.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56118 91177308-0d34-0410-b5e6-96231b3b80d8
users, and teach it about shufflevector instructions.
Also, fix a subtle bug in SimplifyDemandedVectorElts'
insertelement code.
This is a patch that was originally written by Eli Friedman,
with some fixes and cleanup by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55995 91177308-0d34-0410-b5e6-96231b3b80d8
(1) code left over from the days of ConstantPointerRef:
if a use of a function is a GlobalValue then that is
not considered a reason to add an edge from the external
node, even though the use may be as an initializer for
an externally visible global! There might be some point
to this behaviour when the use is by an alias (though the
code predated aliases by some centuries), but I think
PR2782 is a better way of handling that. (2) If function
F calls function G, and also G is a parameter to the
call, then an F->G edge is not added to the callgraph.
While this doesn't seem to matter much, adding such an
edge makes the callgraph more regular.
In addition, the new code should be faster as well as
simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55987 91177308-0d34-0410-b5e6-96231b3b80d8
way it handles the type of the condition is breaking plain
scalar select in the case that the value is a
forward-reference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55976 91177308-0d34-0410-b5e6-96231b3b80d8
and, if so, to return a vector of boolean as a result;
Extend the select LLVM IR instruction to allow you to specify a result
type which is a vector of boolean, in which case the result will be an
element-wise selection instead of choosing one vector or the other; and
Update LangRef.html to describe these changes.
This patch was contributed by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55969 91177308-0d34-0410-b5e6-96231b3b80d8
call (thus changing the call site) it didn't
inform the callgraph about this. But the
call site does matter - as shown by the testcase,
the callgraph become invalid after the inliner
ran (with an edge between two functions simply
missing), resulting in wrong deductions by
GlobalsModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55872 91177308-0d34-0410-b5e6-96231b3b80d8
i32>. This is a little messy, but it works.
We should really get rid of the intrinsics, though, since they map
perfectly well to standard LLVM instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55864 91177308-0d34-0410-b5e6-96231b3b80d8
doesNotAccessMemory, check doesNotAccessMemory
first, since otherwise functions may be
marked readonly rather than readnone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55697 91177308-0d34-0410-b5e6-96231b3b80d8
callgraph, when one member of a SCC calls another
then the analysis would drop to mod-ref because
there is (usually) no function info for the callee
yet; fix this. Teach the analysis about function
attributes, in particular the readonly attribute
(which requires being careful about globals).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55696 91177308-0d34-0410-b5e6-96231b3b80d8
be folded. Instead, fail to fold the entire vector.
We could also return a vector with some elements folded and some not. If anyone
thinks that's a better approach, please speak up!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55689 91177308-0d34-0410-b5e6-96231b3b80d8
instructions in CellSPU as "Expand" so that they won't be generated. I added a
"FIXME" so that this hack can be addressed and reverted once ISD::ROTR is
supported in the .td files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55582 91177308-0d34-0410-b5e6-96231b3b80d8
combiner can now generate ROTR if the backend says that it can handle it. Cell
SPU says this, but gets an error from code gen saying that it can't select
ROTR. I'm xfailing this test until this can be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55579 91177308-0d34-0410-b5e6-96231b3b80d8
its work by putting all nodes in the worklist, requiring a big
dynamic allocation. Now, DAGCombiner just iterates over the AllNodes
list and maintains a worklist for nodes that are newly created or
need to be revisited. This allows the worklist to stay small in most
cases, so it can be a SmallVector.
This has the side effect of making DAGCombine not miss a folding
opportunity in alloca-align-rounding.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55498 91177308-0d34-0410-b5e6-96231b3b80d8
assign it to a version of the xmm register with the regclass that matches its
type. This fixes PR2715, a bug handling some crazy xpcom case in mozilla.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55358 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in FastISelEmitter.cpp, and make FastISel
subtarget aware. Among other things, this lets it work
properly on x86 targets that don't have SSE, where it
successfully selects x87 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55156 91177308-0d34-0410-b5e6-96231b3b80d8
1. x86-64 byval alignment should be max of 8 and alignment of type. Previously the code was not doing what the commit message was saying.
2. Do not use byte repeat move and store operations. These are slow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55139 91177308-0d34-0410-b5e6-96231b3b80d8
demonstrate the extent of its capabilities. Note that it
only attempts to operate on one of the blocks in this
testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55016 91177308-0d34-0410-b5e6-96231b3b80d8
builtins on X86.
Change "lock" instructions to be on a separate line.
This is needed to work around a bug in the Darwin
assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54999 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, Collector was confusing to implementors. Several
thought that this compile-time class was the place to implement
their runtime GC heap. Of course, it doesn't even exist at runtime.
Specifically, the renames are:
Collector -> GCStrategy
CollectorMetadata -> GCFunctionInfo
CollectorModuleMetadata -> GCModuleInfo
CollectorRegistry -> GCRegistry
Function::getCollector -> getGC (setGC, hasGC, clearGC)
Several accessors and nested types have also been renamed to be
consistent. These changes should be obvious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54899 91177308-0d34-0410-b5e6-96231b3b80d8
The loop-deletion pass does not preserve dom frontier, which is required by
loop-index-split. When the PM checks dom frontier for loop-index-split, it has
already verified that lcssa is availalble. However, new dom frontier forces new
loop pass manager, which does not have lcssa yet.
The PM should recheck availability of required analysis passes in such cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54805 91177308-0d34-0410-b5e6-96231b3b80d8
can have a non-negative result; for example, -16%16 is 0. Also,
clarify the related comments. This fixes PR2670.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54767 91177308-0d34-0410-b5e6-96231b3b80d8
track individual leaf values in such cases, so it needs to treat
struct values as normal values in this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54760 91177308-0d34-0410-b5e6-96231b3b80d8
continue past the first conditional branch when looking for a
relevant test. This helps it avoid using MAX expressions in
loop trip counts in more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54697 91177308-0d34-0410-b5e6-96231b3b80d8
do for scalars. Patch contributed by Nicolas Capens
This also generalizes the previous xforms to work on long double, now that
isExactlyValue works for long double.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54653 91177308-0d34-0410-b5e6-96231b3b80d8
directory: some people (guess who!) may build llvm-gcc
with support for objc but not with support for objc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54471 91177308-0d34-0410-b5e6-96231b3b80d8
LowerSubregs, and fix an x86-64 isel bug that this exposed.
SUBREG_TO_REG for x86-64 implicit zero extension is only safe for
isel to generate when the source is known to always have zeros in
the high 32 bits. The EXTRACT_SUBREG instruction does not clear
the high 32 bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54444 91177308-0d34-0410-b5e6-96231b3b80d8
version uses a new algorithm for evaluating the binomial coefficients
which is significantly more efficient for AddRecs of more than 2 terms
(see the comments in the code for details on how the algorithm works).
It also fixes some bugs: it removes the arbitrary length restriction for
AddRecs, it fixes the silent generation of incorrect code for AddRecs
which require a wide calculation width, and it fixes an issue where we
were incorrectly truncating the iteration count too far when evaluating
an AddRec expression narrower than the induction variable.
There are still a few related issues I know of: I think there's
still an issue with the SCEVExpander expansion of AddRec in terms of
the width of the induction variable used. The hack to avoid generating
too-wide integers shouldn't be necessary; instead, the callers should be
considering the cost of the expansion before expanding it (in addition
to not expanding too-wide integers, we might not want to expand
expressions that are really expensive, especially when optimizing for
size; calculating an length-17 32-bit AddRec currently generates about 250
instructions of straight-line code on X86). Also, for long 32-bit
AddRecs on X86, CodeGen really sucks at scheduling the code. I'm planning on
filing follow-up PRs for these issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54332 91177308-0d34-0410-b5e6-96231b3b80d8
subreg form on x86-64, to avoid the problem with x86-32
having GPRs that don't have 8-bit subregs.
Also, change several 16-bit instructions to use
equivalent 32-bit instructions. These have a smaller
encoding and avoid partial-register updates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54223 91177308-0d34-0410-b5e6-96231b3b80d8
to different address spaces. This alters the naming scheme for those
intrinsics, e.g., atomic.load.add.i32 => atomic.load.add.i32.p0i32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54195 91177308-0d34-0410-b5e6-96231b3b80d8
time applying to the implicit comparison in smin expressions. The
correct way to transform an inequality into the opposite
inequality, either signed or unsigned, is with a not expression.
I looked through the SCEV code, and I don't think there are any more
occurrences of this issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54194 91177308-0d34-0410-b5e6-96231b3b80d8
SGT exit condition. Essentially, the correct way to flip an inequality
in 2's complement is the not operator, not the negation operator.
That said, the difference only affects cases involving INT_MIN.
Also, enhance the pre-test search logic to be a bit smarter about
inequalities flipped with a not operator, so it can eliminate the smax
from the iteration count for simple loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54184 91177308-0d34-0410-b5e6-96231b3b80d8
to be marked invalid regardless of whether it is
a debug, an exception handling or (hopefully) a
GC label.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54172 91177308-0d34-0410-b5e6-96231b3b80d8
partially unroll a loop when fully unrolling would not fit under the threshold.
Patch by Mikael Lepistö.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54160 91177308-0d34-0410-b5e6-96231b3b80d8
that says "unconditional loads from this argument are safe", we now keep track
of the safety per set of indices from which loads happen. This prevents
ArgPromotion from promoting loads that aren't really valid. As an added effect,
this will now disregard the the type of the indices passed to a GEP, so
"load GEP %A, i32 1" and "load GEP %A, i64 1" will result in a single argument,
not two.
This fixes PR2598, for which a testcase has been added as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54159 91177308-0d34-0410-b5e6-96231b3b80d8
which is represented in codegen as an 'and' operation. This matches them
with movz instructions, instead of leaving them to be matched by and
instructions with an immediate field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54147 91177308-0d34-0410-b5e6-96231b3b80d8
because opt exited while llvm-as was still
writing to the pipe, causing it to get a
SIGPIPE. It seems best to change things to
avoid the race altogether.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54138 91177308-0d34-0410-b5e6-96231b3b80d8
