both source operands. In the canonical form, the 2nd operand is changed to an
undef and the shuffle mask is adjusted to only reference elements from the 1st
operand. Radar 7434842.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90417 91177308-0d34-0410-b5e6-96231b3b80d8
function, converting "dyn_cast" to "cast", asserting the correct things, and
other general cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90371 91177308-0d34-0410-b5e6-96231b3b80d8
that it doesn't have dangling pointers when abstract types are resolved. This
modifies it somewhat to address comments: making the "StructLayoutMap" an
anonymous structure, calling "removeAbstractTypeUser" when appropriate, and
adding asserts where helpful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90362 91177308-0d34-0410-b5e6-96231b3b80d8
For VMOVv*i[16,32], op bit is don't care, and some cmode bits vary depending on
the immediate values.
Ref: Table A7-15 Modified immediate values for Advanced SIMD instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90173 91177308-0d34-0410-b5e6-96231b3b80d8
for all the processors where I have tried it, and even when it might not help
performance, the cost is quite low. The opportunities for duplicating
indirect branches are limited by other factors so code size does not change
much due to tail duplicating indirect branches aggressively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90144 91177308-0d34-0410-b5e6-96231b3b80d8
divide/remainder since these operations can trap by unroll them and adding undefs
for the resulting vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90108 91177308-0d34-0410-b5e6-96231b3b80d8
With the testcase for pr3120, the "threaded interpreter" runtime decreases
from 1788 to 1413 with this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89877 91177308-0d34-0410-b5e6-96231b3b80d8
it is definitely profitable to tail duplicate indirect branches for x86.
This is likely to be true to various degrees for all modern x86 processors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89865 91177308-0d34-0410-b5e6-96231b3b80d8
Make tail duplication of indirect branches much more aggressive (for targets
that indicate that it is profitable), based on further experience with
this transformation. I compiled 3 large applications with and without
this more aggressive tail duplication and measured minimal changes in code
size. ("size" on Darwin seems to round the text size up to the nearest
page boundary, so I can only say that any code size increase was less than
one 4k page.) Radar 7421267.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89814 91177308-0d34-0410-b5e6-96231b3b80d8
This violates the ABI (that area is "reserved"), and
while it is safe if all code is generated with current
compilers, there is some very old code around that uses
that slot for something else, and breaks if it is stored
into. Adjust testcases looking for current behavior.
I've verified that the stack frame size is right in all
testcases, whether it changed or not. 7311323.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89811 91177308-0d34-0410-b5e6-96231b3b80d8
than doing the same via constpool:
1. Load from constpool costs 3 cycles on A9, movt/movw pair - just 2.
2. Load from constpool might stall up to 300 cycles due to cache miss.
3. Movt/movw does not use load/store unit.
4. Less constpool entries => better compiler performance.
This is only enabled on ELF systems, since darwin does not have needed
relocations (yet).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89720 91177308-0d34-0410-b5e6-96231b3b80d8
way for each TargetJITInfo subclass to allocate its own stubs. This
means stubs aren't as exactly-sized anymore, but it lets us get rid of
TargetJITInfo::emitFunctionStubAtAddr(), which lets ARM and PPC
support the eager JIT, fixing http://llvm.org/PR4816.
* Rename the JITEmitter's stub creation functions to describe the kind
of stub they create. So far, all of them create lazy-compilation
stubs, but they sometimes get used when far-call stubs are needed.
Fixing http://llvm.org/PR5201 will involve fixing this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89715 91177308-0d34-0410-b5e6-96231b3b80d8
Note that "hasDotLocAndDotFile"-style debug info was already broken;
people wanting this functionality should implement it in the
AsmPrinter/DwarfWriter code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89711 91177308-0d34-0410-b5e6-96231b3b80d8
It's probably better in the long run to replace the
indirect-GlobalVariable system. That'll be done after a subsequent
patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89708 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the NEON asm printing so the "predicate" field is printed between the opcode and the data type suffix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89706 91177308-0d34-0410-b5e6-96231b3b80d8
VDUPLND and VDUPLNQ to derive from N2V instead of N2VDup. VDUPLND and VDUPLNQ
now expect op19_18 and op17_16 as the first two args.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89699 91177308-0d34-0410-b5e6-96231b3b80d8
Also fixed the corresponding testcase, and the PALIGNR
intrinsic (tested for correctness with llvm-gcc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89491 91177308-0d34-0410-b5e6-96231b3b80d8
constant pool ranges, as CPEIsInRange() makes conservative assumptions about
the potential alignment changes from branch adjustments. The verification,
on the other hand, runs after those branch adjustments are made, so the
effects on alignment are known and already taken into account. The sanity
check in verify should check the range directly instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89473 91177308-0d34-0410-b5e6-96231b3b80d8
assembly can confuse things utterly, as it's assumed that instructions in
inline assembly are 4 bytes wide. For Thumb mode, that's often not true,
so the calculations for when alignment padding will be present get thrown off,
ultimately leading to out of range constant pool entry references. Making
more conservative assumptions that padding may be necessary when inline asm
is present avoids this situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89403 91177308-0d34-0410-b5e6-96231b3b80d8
fully specified at this level. Subclasses of NLdStLN can specify selective
bit(s) for Inst{7-4}, as is done for VLD[234]LN* and VST[234]LN* inside
ARMInstrNEON.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89377 91177308-0d34-0410-b5e6-96231b3b80d8
contents of the block to be duplicated. Use this for ARM Cortex A8/9 to
be more aggressive tail duplicating indirect branches, since it makes it
much more likely that they will be predicted in the branch target buffer.
Testcase coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89187 91177308-0d34-0410-b5e6-96231b3b80d8
This is probably not confined to *just* these two things.
Anyway, the llvm-gcc front-end may look up the structure layout information for
an abstract type. That information will be stored into a table with the FE's
TD. Instruction combine can come along and also ask for information on that
abstract type, but for a separate TD (the one associated with the pass manager).
After the type is refined, the old structure layout information in the pass
manager's TD file is out of date. If a new type is allocated in the same space
as the old-unrefined type, then the structure type information in the pass
manager's TD file will be wrong, but won't know it.
Fix this by making the TD's structure type information an abstract type user.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89176 91177308-0d34-0410-b5e6-96231b3b80d8
0b1110 (ALways). This is so that the disassembler decoder can distinguish among
BX_RET, BRIND, and BXr9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89000 91177308-0d34-0410-b5e6-96231b3b80d8
The large code model is documented at
http://www.x86-64.org/documentation/abi.pdf and says that calls should
assume their target doesn't live within the 32-bit pc-relative offset
that fits in the call instruction.
To do this, we turn off the global-address->target-global-address
conversion in X86TargetLowering::LowerCall(). The first attempt at
this broke the lazy JIT because it can separate the movabs(imm->reg)
from the actual call instruction. The lazy JIT receives the address of
the movabs as a relocation and needs to record the return address from
the call; and then when that call happens, it needs to patch the
movabs with the newly-compiled target. We could thread the call
instruction into the relocation and record the movabs<->call mapping
explicitly, but that seems to require at least as much new
complication in the code generator as this change.
To fix this, we make lazy functions _always_ go through a call
stub. You'd think we'd only have to force lazy calls through a stub on
difficult platforms, but that turns out to break indirect calls
through a function pointer. The right fix for that is to distinguish
between calls and address-of operations on uncompiled functions, but
that's complex enough to leave for someone else to do.
Another attempt at this defined a new CALL64i pseudo-instruction,
which expanded to a 2-instruction sequence in the assembly output and
was special-cased in the X86CodeEmitter's emitInstruction()
function. That broke indirect calls in the same way as above.
This patch also removes a hack forcing Darwin to the small code model.
Without far-call-stubs, the small code model requires things of the
JITMemoryManager that the DefaultJITMemoryManager can't provide.
Thanks to echristo for lots of testing!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88984 91177308-0d34-0410-b5e6-96231b3b80d8
- This is an initial step towards -march=native support in Clang, and towards
eliminating host dependencies in the targets. See PR5389.
- Patch by Roman Divacky!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88768 91177308-0d34-0410-b5e6-96231b3b80d8
- If destination is a physical register and it has a subreg index, use the
sub-register instead.
This fixes PR5423.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88745 91177308-0d34-0410-b5e6-96231b3b80d8
target-specific AsmPrinters. Not all comments need DebugInfo.
Re-enable the line numbers comment test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88697 91177308-0d34-0410-b5e6-96231b3b80d8
Provide special isLoadFromStackSlotPostFE and isStoreToStackSlotPostFE
interfaces to explicitly request checking for post-frame ptr elimination
operands. This uses a heuristic so it isn't reliable for correctness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87047 91177308-0d34-0410-b5e6-96231b3b80d8
machine instruction loads or stores from/to a stack slot. Unlike
isLoadFromStackSlot and isStoreFromStackSlot, the instruction may be
something other than a pure load/store (e.g. it may be an arithmetic
operation with a memory operand). This helps AsmPrinter determine when
to print a spill/reload comment.
This is only a hint since we may not be able to figure this out in all
cases. As such, it should not be relied upon for correctness.
Implement for X86. Return false by default for other architectures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87026 91177308-0d34-0410-b5e6-96231b3b80d8
slots. The AsmPrinter will use this information to determine whether to
print a spill/reload comment.
Remove default argument values. It's too easy to pass a wrong argument
value when multiple arguments have default values. Make everything
explicit to trap bugs early.
Update all targets to adhere to the new interfaces..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87022 91177308-0d34-0410-b5e6-96231b3b80d8
to directly follow the jump table. Move the layout changes to prior to any
constant island handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86999 91177308-0d34-0410-b5e6-96231b3b80d8
can only branch forward. To best take advantage of them, we'd like to adjust
the basic blocks around a bit when reasonable. This patch puts basics in place
to do that, with a super-simple algorithm for backwards jump table targets that
creates a new branch after the jump table which branches backwards. Real
heuristics for reordering blocks or other modifications rather than inserting
branches will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86791 91177308-0d34-0410-b5e6-96231b3b80d8
generates a sequence similar to this:
__Z4funci:
LFB2:
mflr r0
LCFI0:
stmw r30,-8(r1)
LCFI1:
stw r0,8(r1)
LCFI2:
stwu r1,-80(r1)
LCFI3:
mr r30,r1
LCFI4:
where LCFI3 and LCFI4 are used by the FDE to indicate what the FP, LR, and other
things are. We generated something more like this:
Leh_func_begin1:
mflr r0
stw r31, 20(r1)
stw r0, 8(r1)
Llabel1:
stwu r1, -80(r1)
Llabel2:
mr r31, r1
Note that we are missing the "mr" instruction. This patch makes it more like the
GCC output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86729 91177308-0d34-0410-b5e6-96231b3b80d8
- Force NDEBUG on in any Release build. This drops the compile time to ~100s
from ~600s, in Release mode.
- This may just be a temporary workaround, I don't know the true nature of the
gcc-4.2 compile time performance problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86695 91177308-0d34-0410-b5e6-96231b3b80d8
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86636 91177308-0d34-0410-b5e6-96231b3b80d8
was generated. This caused code like this:
## The asm code for the function
.section __TEXT,__const
.align 2
lJTI11_0:
LJTI11_0:
.long LBB11_16
.long LBB11_4
.long LBB11_5
.long LBB11_6
.long LBB11_7
.long LBB11_8
.long LBB11_9
.long LBB11_10
.long LBB11_11
.long LBB11_12
.long LBB11_13
.long LBB11_14
Leh_func_end11: ## <---now in the wrong section!
The `Leh_func_end11' would then end up in the wrong section, causing the
resulting EH frame information to be wrong:
__ZL11CheckRightsjPKcbRbRP6NSData.eh:
.set Lset500eh,Leh_frame_end11-Leh_frame_begin11
.long Lset500eh ; Length of Frame Information Entry
Leh_frame_begin11:
.long Leh_frame_begin11-Leh_frame_common
.long Leh_func_begin11-.
.set Lset501eh,Leh_func_end11-Leh_func_begin11
.long Lset501eh ; FDE address range
`Lset501eh' is now something huge instead of the real value.
The X86 back-end generates the jump table after the EH information is
emitted. Do the same here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86588 91177308-0d34-0410-b5e6-96231b3b80d8
1. rename the movhp patfrag to movlhps, since thats what it actually matches
2. eliminate the bogus movhps load and store patterns, they were incorrect. The load transforms are already handled (correctly) by shufps/unpack.
3. revert a recent test change to its correct form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86415 91177308-0d34-0410-b5e6-96231b3b80d8
datatypes on a given CPU. This is intended to allow instcombine and other
transformations to avoid converting big sequences of operations to an
inconvenient width, and will help clean up after SRoA. See also "Adding
legal integer sizes to TargetData" on Feb 1, 2009 on llvmdev, and PR3451.
Comments welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86370 91177308-0d34-0410-b5e6-96231b3b80d8
MachineRelocations, "stub" always refers to a far-call stub or a
load-a-faraway-global stub, so this patch adds "Far" to the term. (Other stubs
are used for lazy compilation and dlsym address replacement.) The variable was
also inconsistent between the positive and negative sense, and the positive
sense ("NeedStub") was more demanding than is accurate (since a nearby-enough
function can be called directly even if the platform often requires a stub).
Since the negative sense causes double-negatives, I switched to
"MayNeedFarStub" globally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86363 91177308-0d34-0410-b5e6-96231b3b80d8
except it doesn't care if the definitions' virtual registers differ. This is
used by machine LICM and other MI passes to perform CSE.
- Teach Thumb2InstrInfo::isIdentical() to check two t2LDRpci_pic are identical.
Since pc relative constantpool entries are always different, this requires it
it check if the values can actually the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86328 91177308-0d34-0410-b5e6-96231b3b80d8
was wrong and too aggressive in the sense that DPSoRegFrm includes both constant
shifts (with Inst{4} = 0) and register controlled shifts (with Inst{4} = 1 and
Inst{7} = 0). The 'rr' fragment of the multiclass definitions actually means
register/register with no shift, see A8-11.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86319 91177308-0d34-0410-b5e6-96231b3b80d8
load of a GV from constantpool and then add pc. It allows the code sequence to
be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
to this pass. This is done before post regalloc scheduling to allow the
scheduler to proper schedule these instructions. It also allow them to be
if-converted and shrunk by later passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86304 91177308-0d34-0410-b5e6-96231b3b80d8
will not accept negative values for these. LLVM's default operand printing
sign extends values, so that valid unsigned values appear as negative
immediates. Print all VMOV immediate operands as hex values to resolve this.
Radar 7372576.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86301 91177308-0d34-0410-b5e6-96231b3b80d8
aggressive testing of dynamic stack alignment.
Note that this is off by default, and enabled for LLCBETA nightly results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86064 91177308-0d34-0410-b5e6-96231b3b80d8
The KILL pseudo-instruction may survive to the asm printer pass, just like the IMPLICIT_DEF. Print the KILL as a comment instead of just leaving a blank line in the output.
With -asm-verbose=0, a blank line is printed, like IMPLICIT?DEF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86041 91177308-0d34-0410-b5e6-96231b3b80d8
