The Hazard checker implements in-order contraints, or interlocked
resources. Ready instructions with hazards do not enter the available
queue and are not visible to other heuristics.
The major code change is the addition of SchedBoundary to encapsulate
the state at the top or bottom of the schedule, including both a
pending and available queue.
The scheduler now counts cycles in sync with the hazard checker. These
are minimum cycle counts based on known hazards.
Targets with no itinerary (x86_64) currently remain at cycle 0. To fix
this, we need to provide some maximum issue width for all targets. We
also need to add the concept of expected latency vs. minimum latency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157427 91177308-0d34-0410-b5e6-96231b3b80d8
Live ranges with a constrained register class may benefit from splitting
around individual uses. It allows the remaining live range to use a
larger register class where it may allocate. This is like spilling to a
different register class.
This is only attempted on constrained register classes.
<rdar://problem/11438902>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157354 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the coalescer keeps live intervals and machine code in sync at
all times, it needs to deal with identity copies differently.
When merging two virtual registers, all identity copies are removed
right away. This means that other identity copies must come from
somewhere else, and they are going to have a value number.
Deal with such copies by merging the value numbers before erasing the
copy instruction. Otherwise, we leave dangling value numbers in the live
interval.
This fixes PR12927.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157340 91177308-0d34-0410-b5e6-96231b3b80d8
Also make sure registers aren't erased twice if the dead def mentions
the register twice.
This fixes PR12911.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157254 91177308-0d34-0410-b5e6-96231b3b80d8
This helps compile time when the greedy register allocator splits live
ranges in giant functions. Without the bias, we would try to grow
regions through the giant edge bundles, usually to find out that the
region became too big and expensive.
If a live range has many uses in blocks near the giant bundle, the small
negative bias doesn't make a big difference, and we still consider
regions including the giant edge bundle.
Giant edge bundles are usually connected to landing pads or indirect
branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157174 91177308-0d34-0410-b5e6-96231b3b80d8
With physreg joining out of the way, it is easy to recognize the
instructions that need their kill flags cleared while testing for
interference.
This allows us to skip the final scan of all instructions for an 11%
speedup of the coalescer pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157169 91177308-0d34-0410-b5e6-96231b3b80d8
may be RAUW'd by the recursive call to LegalizeOps; instead, retrieve
the other operands when calling UpdateNodeOperands. Fixes PR12889.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157162 91177308-0d34-0410-b5e6-96231b3b80d8
X86 has 2-addr instructions with different constraints on the tied def
and use operands. One is GR32, one is GR32_NOSP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157149 91177308-0d34-0410-b5e6-96231b3b80d8
Dead code elimination during coalescing could cause a virtual register
to be split into connected components. The following rewriting would be
confused about the already joined copies present in the code, but
without a corresponding value number in the live range.
Erase all joined copies instantly when joining intervals such that the
MI and LiveInterval representations are always in sync.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157135 91177308-0d34-0410-b5e6-96231b3b80d8
Dead code and joined copies are now eliminated on the fly, and there is
no need for a post pass.
This makes the coalescer work like other modern register allocator
passes: Code is changed on the fly, there is no pending list of changes
to be committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157132 91177308-0d34-0410-b5e6-96231b3b80d8
The late dead code elimination is no longer necessary.
The test changes are cause by a register hint that can be either %rdi or
%rax. The choice depends on the use list order, which this patch changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157131 91177308-0d34-0410-b5e6-96231b3b80d8
Before rewriting uses of one value in A to register B, check that there
are no tied uses. That would require multiple A values to be rewritten.
This bug can't bite in the current version of the code for a fairly
subtle reason: A tied use would have caused 2-addr to insert a copy
before the use. If the copy has been coalesced, it will be found by the
same loop changed by this patch, and the optimization is aborted.
This was exposed by 400.perlbench and lua after applying a patch that
deletes joined copies aggressively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157130 91177308-0d34-0410-b5e6-96231b3b80d8
There is no reason to defer the collection of virtual registers whose
register class may be replaced with a larger class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157125 91177308-0d34-0410-b5e6-96231b3b80d8
Remaining virtreg->physreg copies were rematerialized during
updateRegDefsUses(), but we already do the same thing in joinCopy() when
visiting the physreg copy instruction.
Eliminate the preserveSrcInt argument to reMaterializeTrivialDef(). It
is now always true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157103 91177308-0d34-0410-b5e6-96231b3b80d8
Dead copies cause problems because they are trivial to coalesce, but
removing them gived the live range a dangling end point. This patch
enables full dead code elimination which trims live ranges to their uses
so end points don't dangle.
DCE may erase multiple instructions. Put the pointers in an ErasedInstrs
set so we never risk visiting erased instructions in the work list.
There isn't supposed to be any dead copies entering RegisterCoalescer,
but they do slip by as evidenced by test/CodeGen/X86/coalescer-dce.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157101 91177308-0d34-0410-b5e6-96231b3b80d8
Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.
Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.
data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"
The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.
rdar://11459456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157062 91177308-0d34-0410-b5e6-96231b3b80d8
It is no longer necessary to separate VirtCopies, PhysCopies, and
ImpDefCopies. Implicitly defined copies are extremely rare after we
added the ProcessImplicitDefs pass, and physical register copies are not
joined any longer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157059 91177308-0d34-0410-b5e6-96231b3b80d8
This has been disabled for a while, and it is not a feature we want to
support. Copies between physical and virtual registers are eliminated by
good hinting support in the register allocator. Joining virtual and
physical registers is really a form of register allocation, and the
coalescer is not properly equipped to do that. In particular, it cannot
backtrack coalescing decisions, and sometimes that would cause it to
create programs that were impossible to register allocate, by exhausting
a small register class.
It was also very difficult to keep track of the live ranges of aliasing
registers when extending the live range of a physreg. By disabling
physreg joining, we can let fixed physreg live ranges remain constant
throughout the register allocator super-pass.
One type of physreg joining remains: A virtual register that has a
single value which is a copy of a reserved register can be merged into
the reserved physreg. This always lowers register pressure, and since we
don't compute live ranges for reserved registers, there are no problems
with aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157055 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGBuilder::Clusterify : main functinality was replaced with CRSBuilder::optimize, so big part of Clusterify's code was reduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157046 91177308-0d34-0410-b5e6-96231b3b80d8
non-profitable commute using outdated info. The test case would still fail
because of poor pre-RA schedule. That will be fixed by MI scheduler.
rdar://11472010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157038 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the basic strategy for register pressure scheduling.
1) Respect target limits at all times.
2) Indentify critical register classes (pressure sets).
Track pressure within the scheduled region.
Avoid increasing scheduled pressure for critical registers.
3) Avoid exceeding the max pressure of the region prior to scheduling.
Added logic for picking between the top and bottom ready Q's based on
regpressure heuristics.
Status: functional but needs to be asjusted to achieve good results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157006 91177308-0d34-0410-b5e6-96231b3b80d8
RegisterCoalescer set <undef> flags on all operands of copy instructions
that are scheduled to be removed. This is so they won't affect
shrinkToUses() by introducing false register reads.
Make sure those <undef> flags are never cleared, or shrinkToUses() could
cause live intervals to end at instructions about to be deleted.
This would be a lot simpler if RegisterCoalescer could just erase joined
copies immediately instead of keeping all the to-be-deleted instructions
around.
This fixes PR12862. Unfortunately, bugpoint can't create a sane test
case for this. Like many other coalescer problems, this failure depends
of a very fragile series of events.
<rdar://problem/11474428>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157001 91177308-0d34-0410-b5e6-96231b3b80d8
When widening an existing <def,reads-undef> operand to a super-register,
it may be necessary to clear the <undef> flag because the wider register
is now read-modify-write through the instruction.
Conversely, it may be necessary to add an <undef> flag when the
coalescer turns a full-register def into a sub-register def, but the
larger register wasn't live before the instruction.
This happens in test/CodeGen/ARM/coalesce-subregs.ll, but the test
is too small for the <undef> flags to affect the generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156951 91177308-0d34-0410-b5e6-96231b3b80d8
It is now possible to coalesce weird skewed sub-register copies by
picking a super-register class larger than both original registers. The
included test case produces code like this:
vld2.32 {d16, d17, d18, d19}, [r0]!
vst2.32 {d18, d19, d20, d21}, [r0]
We still perform interference checking as if it were a normal full copy
join, so this is still quite conservative. In particular, the f1 and f2
functions in the included test case still have remaining copies because
of false interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156878 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible to coalesce two overlapping registers to a common
super-register that it larger than both of the original registers.
The important difference is that it may be necessary to rewrite DstReg
operands as well as SrcReg operands because the sub-register index has
changed.
This behavior is still disabled by CoalescerPair.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156869 91177308-0d34-0410-b5e6-96231b3b80d8
Now both SrcReg and DstReg can be sub-registers of the final coalesced
register.
CoalescerPair::setRegisters still rejects such copies because
RegisterCoalescer doesn't yet handle them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156848 91177308-0d34-0410-b5e6-96231b3b80d8
This feature avoids creating edges in the scheduler's dependence graph
for non-aliasing memory operations according to whichever alias
analysis is available. It has been fully tested in Hexagon. Before
making this default, it needs to be extended to handle multiple
MachineMemOperands, compile time needs more evaluation, and
benchmarking on X86 and ARM is needed.
Patch by Sergei Larin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156842 91177308-0d34-0410-b5e6-96231b3b80d8
Add the MCRegisterInfo to the factories and constructors.
Patch by Tom Stellard <Tom.Stellard@amd.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156828 91177308-0d34-0410-b5e6-96231b3b80d8
RAFast must add an <imp-def> operand when it is rewriting a sub-register
def that isn't a read-modify-write.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156777 91177308-0d34-0410-b5e6-96231b3b80d8
Empty live ranges represent undef and still get allocated, but they
won't appear in LiveIntervalUnions.
Patch by Patrik Hägglund!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156685 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize the following cases:
sub r1, r3 | sub r1, imm
cmp r3, r1 or cmp r1, r3 | cmp r1, imm
bge L1
TO
subs r1, r3
bge L1 or ble L1
If the branch instruction can use flag from "sub", then we can replace
"sub" with "subs" and eliminate the "cmp" instruction.
rdar: 10734411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156599 91177308-0d34-0410-b5e6-96231b3b80d8
Prioritize the instruction that comes closest to keeping pressure
under the target's limit. Then prioritize instructions that avoid
increasing the max pressure in the scheduled region. The max pressure
heuristic is a tad aggressive. Later I'll fix it to consider the
unscheduled pressure as well.
WIP: This is mostly functional but untested and not likely to do much good yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156574 91177308-0d34-0410-b5e6-96231b3b80d8
Added getMaxExcessUpward/DownwardPressure. They somewhat abuse the
tracker by speculatively handling an instruction out of order. But it
is convenient for now. In the future, we will cache each instruction's
pressure contribution to make this efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156561 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize the following cases:
sub r1, r3 | sub r1, imm
cmp r3, r1 or cmp r1, r3 | cmp r1, imm
bge L1
TO
subs r1, r3
bge L1 or ble L1
If the branch instruction can use flag from "sub", then we can replace
"sub" with "subs" and eliminate the "cmp" instruction.
rdar: 10734411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156550 91177308-0d34-0410-b5e6-96231b3b80d8
When a combine twiddles an extract_vector, care should be take to preserve
the type of the index operand. No luck extracting a reasonable testcase,
unfortunately.
rdar://11391009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156419 91177308-0d34-0410-b5e6-96231b3b80d8
At least some of them:
%vreg1:sub_16bit = COPY %vreg2:sub_16bit; GR64:%vreg1, GR32: %vreg2
Previously, we couldn't figure out that the above copy could be
eliminated by coalescing %vreg2 with %vreg1:sub_32bit.
The new getCommonSuperRegClass() hook makes it possible.
This is not very useful yet since the unmodified part of the destination
register usually interferes with the source register. The coalescer
needs to understand sub-register interference checking first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156334 91177308-0d34-0410-b5e6-96231b3b80d8
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156328 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to determine whether it's profitable to turn a select into a
branch when the branch is likely to be predicted.
Currently enabled for everything but Atom on X86 and Cortex-A9 devices on ARM.
I'm not entirely happy with the name of this flag, suggestions welcome ;)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156233 91177308-0d34-0410-b5e6-96231b3b80d8
We want the representative register class to contain the largest
super-registers available. This makes the function less sensitive to the
register class numbering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156220 91177308-0d34-0410-b5e6-96231b3b80d8
The masks returned by SuperRegClassIterator are computed automatically
by TableGen. This is better than depending on the manually specified
SuperRegClasses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156147 91177308-0d34-0410-b5e6-96231b3b80d8
to catch cases like:
%reg1024<def> = MOV r1
%reg1025<def> = MOV r0
%reg1026<def> = ADD %reg1024, %reg1025
r0 = MOV %reg1026
By commuting ADD, it let coalescer eliminate all of the copies. However, there
was a bug in the heuristics where it ended up commuting the ADD in:
%reg1024<def> = MOV r0
%reg1025<def> = MOV 0
%reg1026<def> = ADD %reg1024, %reg1025
r0 = MOV %reg1026
That did no benefit but rather ensure the last MOV would not be coalesced.
rdar://11355268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156048 91177308-0d34-0410-b5e6-96231b3b80d8
The ensures that virtual registers always belong to an allocatable class.
If your target attempts to create a vreg for an operand that has no
allocatable register subclass, you will crash quickly.
This ensures that targets define register classes as intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156046 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetPassManager's default constructor wants to initialize the PassManager
to 'null'. But it's illegal to bind a null reference to a null l-value. Make the
ivar a pointer instead.
PR12468
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155902 91177308-0d34-0410-b5e6-96231b3b80d8
This time, also fix the caller of AddGlue to properly handle
incomplete chains. AddGlue had failure modes, but shamefully hid them
from its caller. It's luck ran out.
Fixes rdar://11314175: BuildSchedUnits assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155749 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine strangeness may result in multiple loads from the same
offset. They both may try to glue themselves to another load. We could
insist that the redundant loads glue themselves to each other, but the
beter fix is to bail out from bad gluing at the time we detect it.
Fixes rdar://11314175: BuildSchedUnits assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155668 91177308-0d34-0410-b5e6-96231b3b80d8
Cross-class joins have been normal and fully supported for a while now.
With TableGen generating the getMatchingSuperRegClass() hook, they are
unlikely to cause problems again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155552 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the heuristic for disabling cross-class joins. The greedy
register allocator can handle the narrow register classes, and when it
splits a live range, it can pick a larger register class.
Benchmarks were unaffected by this change.
<rdar://problem/11302212>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155551 91177308-0d34-0410-b5e6-96231b3b80d8
The DAG builder is a convenient place to do it. Hopefully this is more
efficient than a separate traversal over the same region.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155456 91177308-0d34-0410-b5e6-96231b3b80d8
MachineInstr sequence.
This uses the new target interface for tracking register pressure
using pressure sets to model overlapping register classes and
subregisters.
RegisterPressure results can be tracked incrementally or stored at
region boundaries. Global register pressure can be deduced from local
RegisterPressure results if desired.
This is an early, somewhat untested implementation. I'm working on
testing it within the context of a register pressure reducing
MachineScheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155454 91177308-0d34-0410-b5e6-96231b3b80d8
on X86 Atom. Some of our tests failed because the tail merging part of
the BranchFolding pass was creating new basic blocks which did not
contain live-in information. When the anti-dependency code in the Post-RA
scheduler ran, it would sometimes rename the register containing
the function return value because the fact that the return value was
live-in to the subsequent block had been lost. To fix this, it is necessary
to run the RegisterScavenging code in the BranchFolding pass.
This patch makes sure that the register scavenging code is invoked
in the X86 subtarget only when post-RA scheduling is being done.
Post RA scheduling in the X86 subtarget is only done for Atom.
This patch adds a new function to the TargetRegisterClass to control
whether or not live-ins should be preserved during branch folding.
This is necessary in order for the anti-dependency optimizations done
during the PostRASchedulerList pass to work properly when doing
Post-RA scheduling for the X86 in general and for the Intel Atom in particular.
The patch adds and invokes the new function trackLivenessAfterRegAlloc()
instead of using the existing requiresRegisterScavenging().
It changes BranchFolding.cpp to call trackLivenessAfterRegAlloc() instead of
requiresRegisterScavenging(). It changes the all the targets that
implemented requiresRegisterScavenging() to also implement
trackLivenessAfterRegAlloc().
It adds an assertion in the Post RA scheduler to make sure that post RA
liveness information is available when it is needed.
It changes the X86 break-anti-dependencies test to use –mcpu=atom, in order
to avoid running into the added assertion.
Finally, this patch restores the use of anti-dependency checking
(which was turned off temporarily for the 3.1 release) for
Intel Atom in the Post RA scheduler.
Patch by Andy Zhang!
Thanks to Jakob and Anton for their reviews.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155395 91177308-0d34-0410-b5e6-96231b3b80d8
The X86 target is editing the selection DAG while isel is selecting
nodes following a topological ordering. When the DAG hacking triggers
CSE, nodes can be deleted and bad things happen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155257 91177308-0d34-0410-b5e6-96231b3b80d8
Now that multiple DAGUpdateListeners can be active at the same time,
ISelPosition can become a local variable in DoInstructionSelection.
We simply register an ISelUpdater with CurDAG while ISelPosition exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155249 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of passing listener pointers to RAUW, let SelectionDAG itself
keep a linked list of interested listeners.
This makes it possible to have multiple listeners active at once, like
RAUWUpdateListener was already doing. It also makes it possible to
register listeners up the call stack without controlling all RAUW calls
below.
DAGUpdateListener uses an RAII pattern to add itself to the SelectionDAG
list of active listeners.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155248 91177308-0d34-0410-b5e6-96231b3b80d8
The <undef> flag on a def operand only applies to partial register
redefinitions. Only print the flag when relevant, and print it as
<def,read-undef> to make it clearer what it means.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155239 91177308-0d34-0410-b5e6-96231b3b80d8
This nicely handles the most common case of virtual register sets, but
also handles anticipated cases where we will map pointers to IDs.
The goal is not to develop a completely generic SparseSet
template. Instead we want to handle the expected uses within llvm
without any template antics in the client code. I'm adding a bit of
template nastiness here, and some assumption about expected usage in
order to make the client code very clean.
The expected common uses cases I'm designing for:
- integer keys that need to be reindexed, and may map to additional
data
- densely numbered objects where we want pointer keys because no
number->object map exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155227 91177308-0d34-0410-b5e6-96231b3b80d8
commits have had several major issues pointed out in review, and those
issues are not being addressed in a timely fashion. Furthermore, this
was all committed leading up to the v3.1 branch, and we don't need piles
of code with outstanding issues in the branch.
It is possible that not all of these commits were necessary to revert to
get us back to a green state, but I'm going to let the Hexagon
maintainer sort that out. They can recommit, in order, after addressing
the feedback.
Reverted commits, with some notes:
Primary commit r154616: HexagonPacketizer
- There are lots of review comments here. This is the primary reason
for reverting. In particular, it introduced large amount of warnings
due to a bad construct in tablegen.
- Follow-up commits that should be folded back into this when
reposting:
- r154622: CMake fixes
- r154660: Fix numerous build warnings in release builds.
- Please don't resubmit this until the three commits above are
included, and the issues in review addressed.
Primary commit r154695: Pass to replace transfer/copy ...
- Reverted to minimize merge conflicts. I'm not aware of specific
issues with this patch.
Primary commit r154703: New Value Jump.
- Primarily reverted due to merge conflicts.
- Follow-up commits that should be folded back into this when
reposting:
- r154703: Remove iostream usage
- r154758: Fix CMake builds
- r154759: Fix build warnings in release builds
- Please incorporate these fixes and and review feedback before
resubmitting.
Primary commit r154829: Hexagon V5 (floating point) support.
- Primarily reverted due to merge conflicts.
- Follow-up commits that should be folded back into this when
reposting:
- r154841: Remove unused variable (fixing build warnings)
There are also accompanying Clang commits that will be reverted for
consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155047 91177308-0d34-0410-b5e6-96231b3b80d8
transformation:
(X op C1) ^ C2 --> (X op C1) & ~C2 iff (C1&C2) == C2
should be done.
This change has been tested:
Using a debug+asserts build:
on the specific test case that brought this bug to light
make check-all
lnt nt
using this clang to build a release version of clang
Using the release+asserts clang-with-clang build:
on the specific test case that brought this bug to light
make check-all
lnt nt
Checking in because Evan wants it checked in. Test case forthcoming after
scrubbing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154955 91177308-0d34-0410-b5e6-96231b3b80d8
for the life of me remember why I wrote it this way, but I can't see any good
reason for it now. This patch replaces the custom linked list with an ilist.
This change should preserve the existing numberings exactly, so no generated code
should change (if it does, file a bug!).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154904 91177308-0d34-0410-b5e6-96231b3b80d8
both fallthrough and a conditional branch target the same successor.
Gracefully delete the conditional branch and introduce any unconditional
branch needed to reach the actual successor. This fixes memory
corruption in 2009-06-15-RegScavengerAssert.ll and possibly other tests.
Also, while I'm here fix a latent bug I spotted by inspection. I never
applied the same fundamental fix to this fallthrough successor finding
logic that I did to the logic used when there are no conditional
branches. As a consequence it would have selected landing pads had they
be aligned in just the right way here. I don't have a test case as
I spotted this by inspection, and the previous time I found this
required have of TableGen's source code to produce it. =/ I hate backend
bugs. ;]
Thanks to Jim Grosbach for helping me reason through this and reviewing
the fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154867 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly to test the waters. I'd like to get results from FNT
build bots and other bots running on non-x86 platforms.
This feature has been pretty heavily tested over the last few months by
me, and it fixes several of the execution time regressions caused by the
inlining work by preventing inlining decisions from radically impacting
block layout.
I've seen very large improvements in yacr2 and ackermann benchmarks,
along with the expected noise across all of the benchmark suite whenever
code layout changes. I've analyzed all of the regressions and fixed
them, or found them to be impossible to fix. See my email to llvmdev for
more details.
I'd like for this to be in 3.1 as it complements the inliner changes,
but if any failures are showing up or anyone has concerns, it is just
a flag flip and so can be easily turned off.
I'm switching it on tonight to try and get at least one run through
various folks' performance suites in case SPEC or something else has
serious issues with it. I'll watch bots and revert if anything shows up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154816 91177308-0d34-0410-b5e6-96231b3b80d8
rotation. When there is a loop backedge which is an unconditional
branch, we will end up with a branch somewhere no matter what. Try
placing this backedge in a fallthrough position above the loop header as
that will definitely remove at least one branch from the loop iteration,
where whole loop rotation may not.
I haven't seen any benchmarks where this is important but loop-blocks.ll
tests for it, and so this will be covered when I flip the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154812 91177308-0d34-0410-b5e6-96231b3b80d8
laid out in a form with a fallthrough into the header and a fallthrough
out of the bottom. In that case, leave the loop alone because any
rotation will introduce unnecessary branches. If either side looks like
it will require an explicit branch, then the rotation won't add any, do
it to ensure the branch occurs outside of the loop (if possible) and
maximize the benefit of the fallthrough in the bottom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154806 91177308-0d34-0410-b5e6-96231b3b80d8
This is a complex change that resulted from a great deal of
experimentation with several different benchmarks. The one which proved
the most useful is included as a test case, but I don't know that it
captures all of the relevant changes, as I didn't have specific
regression tests for each, they were more the result of reasoning about
what the old algorithm would possibly do wrong. I'm also failing at the
moment to craft more targeted regression tests for these changes, if
anyone has ideas, it would be welcome.
The first big thing broken with the old algorithm is the idea that we
can take a basic block which has a loop-exiting successor and a looping
successor and use the looping successor as the layout top in order to
get that particular block to be the bottom of the loop after layout.
This happens to work in many cases, but not in all.
The second big thing broken was that we didn't try to select the exit
which fell into the nearest enclosing loop (to which we exit at all). As
a consequence, even if the rotation worked perfectly, it would result in
one of two bad layouts. Either the bottom of the loop would get
fallthrough, skipping across a nearer enclosing loop and thereby making
it discontiguous, or it would be forced to take an explicit jump over
the nearest enclosing loop to earch its successor. The point of the
rotation is to get fallthrough, so we need it to fallthrough to the
nearest loop it can.
The fix to the first issue is to actually layout the loop from the loop
header, and then rotate the loop such that the correct exiting edge can
be a fallthrough edge. This is actually much easier than I anticipated
because we can handle all the hard parts of finding a viable rotation
before we do the layout. We just store that, and then rotate after
layout is finished. No inner loops get split across the post-rotation
backedge because we check for them when selecting the rotation.
That fix exposed a latent problem with our exitting block selection --
we should allow the backedge to point into the middle of some inner-loop
chain as there is no real penalty to it, the whole point is that it
*won't* be a fallthrough edge. This may have blocked the rotation at all
in some cases, I have no idea and no test case as I've never seen it in
practice, it was just noticed by inspection.
Finally, all of these fixes, and studying the loops they produce,
highlighted another problem: in rotating loops like this, we sometimes
fail to align the destination of these backwards jumping edges. Fix this
by actually walking the backwards edges rather than relying on loopinfo.
This fixes regressions on heapsort if block placement is enabled as well
as lots of other cases where the previous logic would introduce an
abundance of unnecessary branches into the execution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154783 91177308-0d34-0410-b5e6-96231b3b80d8
This is a special flag for targets that really want their block
terminators in the DAG. The default scheduler cannot handle this
correctly, so it becomes the specialized scheduler's responsibility to
schedule terminators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154712 91177308-0d34-0410-b5e6-96231b3b80d8
- Don't copy offsets into HashData, the underlying vector won't change once the table is finalized.
- Allocate HashData and HashDataContents in a BumpPtrAllocator.
- Allocate string map entries in the same allocator.
- Random cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154694 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a dagcombine optimization which assumes that the vsetcc result type is always
of the same size as the compared values. This is ture for SSE/AVX/NEON but not
for all targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154490 91177308-0d34-0410-b5e6-96231b3b80d8
Allow cheap instructions to be hoisted if they are register pressure
neutral or better. This happens if the instruction is the last loop use
of another virtual register.
Only expensive instructions are allowed to increase loop register
pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154455 91177308-0d34-0410-b5e6-96231b3b80d8
Hoisting a value that is used by a PHI in the loop will introduce a
copy because the live range is extended to cross the PHI.
The same applies to PHIs in exit blocks.
Also use this opportunity to make HasLoopPHIUse() non-recursive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154454 91177308-0d34-0410-b5e6-96231b3b80d8
don't elide the branch instruction if it's the only one in the block,
otherwise it's ok.
PR9796 and rdar://11215207
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154417 91177308-0d34-0410-b5e6-96231b3b80d8
the loop header has a non-loop predecessor which has been pre-fused into
its chain due to unanalyzable branches. In this case, rotating the
header into the body of the loop in order to place a loop exit at the
bottom of the loop is a Very Bad Idea as it makes the loop
non-contiguous.
I'm working on a good test case for this, but it's a bit annoynig to
craft. I should get one shortly, but I'm submitting this now so I can
begin the (lengthy) performance analysis process. An initial run of LNT
looks really, really good, but there is too much noise there for me to
trust it much.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154395 91177308-0d34-0410-b5e6-96231b3b80d8
legalizer always use the DAG entry node. This is wrong when the libcall is
emitted as a tail call since it effectively folds the return node. If
the return node's input chain is not the entry (i.e. call, load, or store)
use that as the tail call input chain.
PR12419
rdar://9770785
rdar://11195178
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154370 91177308-0d34-0410-b5e6-96231b3b80d8
This patch restores TwoAddressInstructionPass's pre-r153892 behaviour when
rescheduling instructions in TryInstructionTransform. Hopefully this will fix
PR12493. To refix PR11861, lowering of INSERT_SUBREGS is deferred until after
the copy that unties the operands is emitted (this seems to be a more
appropriate fix for that issue anyway).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154338 91177308-0d34-0410-b5e6-96231b3b80d8
when -ffast-math, i.e. don't just always do it if the reciprocal can
be formed exactly. There is already an IR level transform that does
that, and it does it more carefully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154296 91177308-0d34-0410-b5e6-96231b3b80d8
in TargetLowering. There was already a FIXME about this location being
odd. The interface is simplified as a consequence. This will also make
it easier to change TLS models when compiling with PIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154292 91177308-0d34-0410-b5e6-96231b3b80d8
where a chain outside of the loop block-set ended up in the worklist for
scheduling as part of the contiguous loop. However, asserting the first
block in the chain is in the loop-set isn't a valid check -- we may be
forced to drag a chain into the worklist due to one block in the chain
being part of the loop even though the first block is *not* in the loop.
This occurs when we have been forced to form a chain early due to
un-analyzable branches.
No test case here as I have no idea how to even begin reducing one, and
it will be hopelessly fragile. We have to somehow end up with a loop
header of an inner loop which is a successor of a basic block with an
unanalyzable pair of branch instructions. Ow. Self-host triggers it so
it is unlikely it will regress.
This at least gets block placement back to passing selfhost and the test
suite. There are still a lot of slowdown that I don't like coming out of
block placement, although there are now also a lot of speedups. =[ I'm
seeing swings in both directions up to 10%. I'm going to try to find
time to dig into this and see if we can turn this on for 3.1 as it does
a really good job of cleaning up after some loops that degraded with the
inliner changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154287 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle node because it could introduce new shuffle nodes that were not
supported efficiently by the target.
2. Add a more restrictive shuffle-of-shuffle optimization for cases where the
second shuffle reverses the transformation of the first shuffle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154266 91177308-0d34-0410-b5e6-96231b3b80d8
reciprocal if converting to the reciprocal is exact. Do it even if inexact
if -ffast-math. This substantially speeds up ac.f90 from the polyhedron
benchmarks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154265 91177308-0d34-0410-b5e6-96231b3b80d8
This enables debuggers to see what are interesting lines for a
breakpoint rather than any line that starts a function.
rdar://9852092
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154120 91177308-0d34-0410-b5e6-96231b3b80d8