is currently off by default, and can be enabled with
-disable-post-RA-scheduler=false.
This doesn't have a significant impact on most code yet because it doesn't
yet do anything to address anti-dependencies and it doesn't attempt to
disambiguate memory references. Also, several popular targets
don't have pipeline descriptions yet.
The majority of the changes here are splitting the SelectionDAG-specific
code out of ScheduleDAG, so that ScheduleDAG can be moved to
libLLVMCodeGen.a. The interface between ScheduleDAG-using code and
the rest of the scheduling code is somewhat rough and will evolve.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59676 91177308-0d34-0410-b5e6-96231b3b80d8
and FP_ROUND. Not sure what these were doing
here - probably they were sometimes (wrongly)
created with integer operands somewhere that
has since been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59548 91177308-0d34-0410-b5e6-96231b3b80d8
SCALAR_TO_VECTOR. I didn't add the testcase, because
once llc gets past scalar-to-vector it hits a SPU target
lowering bug and explodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59530 91177308-0d34-0410-b5e6-96231b3b80d8
new CycleBound value. Instead, just update CycleBound on each call.
Also, make ReleasePred and ReleaseSucc methods more consistent accross
the various schedulers.
This also happens to make ScheduleDAGRRList's CycleBound computation
somewhat more interesting, though it still doesn't have any noticeable
effect, because no current targets that use the register-pressure
reduction scheduler provide pipeline models.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59475 91177308-0d34-0410-b5e6-96231b3b80d8
use SHUFFLE_VECTOR instead. If not practical, fall back
to the old scheme of building the split result by hand
using a BUILD_VECTOR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59361 91177308-0d34-0410-b5e6-96231b3b80d8
and when loading/storing a widen vector, make sure that they are loaded
and stored in consecutive order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59357 91177308-0d34-0410-b5e6-96231b3b80d8
fairly conservative; it doesn't do alias-analysis queries and it doesn't
attempt to break anti-dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59324 91177308-0d34-0410-b5e6-96231b3b80d8
to carry a SmallVector of flagged nodes, just calculate the flagged nodes
dynamically when they are needed.
The local-liveness change is due to a trivial scheduling change where
the scheduler arbitrary decision differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59273 91177308-0d34-0410-b5e6-96231b3b80d8
special-purpose hook to a new pass. Also, add check to see if any
x87 virtual registers are used, to avoid doing any work in the
common case that no x87 code is needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59190 91177308-0d34-0410-b5e6-96231b3b80d8
that it no longer handles non-power-of-two vectors.
However it previously only handled them sometimes,
depending on obscure numerical relationships between
the index and vector type. For example, for a vector
of length 6, it would succeed if and only if the
index was an even multiple of 6. I consider this
more confusing than useful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59122 91177308-0d34-0410-b5e6-96231b3b80d8
before creating the SUnit for the operation that it was unfolded from. This
allows each SUnit to have all of its predecessor SUnits available at the time
it is created. I don't know yet if this will be absolutely required, but it
is a little tidier to do it this way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59083 91177308-0d34-0410-b5e6-96231b3b80d8
argument instead of taking the SelectionDAG's TargetMachine. This is
needed for some upcoming scheduler changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59055 91177308-0d34-0410-b5e6-96231b3b80d8
The CC was changed, but wasn't checked to see if it was legal if the DAG
combiner was being run after legalization. Threw in a couple of checks just to
make sure that it's okay. As far as the PR is concerned, no back-end target
actually exhibited this problem, so there isn't an associated testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59035 91177308-0d34-0410-b5e6-96231b3b80d8
support targets that support these conversions. Users should avoid using
this node as the current targets don't generating code for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59001 91177308-0d34-0410-b5e6-96231b3b80d8
where the argument is an apint, or smaller than the minimum
size for which there is a libcall (i32).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58994 91177308-0d34-0410-b5e6-96231b3b80d8
inform the optimizers that the result must be zero/
sign extended from the smaller type. For example,
if a fp to unsigned i16 is promoted to fp to i32,
then we are allowed to assume that the extra 16 bits
are zero (because the result of fp to i16 is undefined
if the result does not fit in an i16). This is
quite aggressive, but should help the optimizers
produce better code. This requires correcting a
test which thought that fp_to_uint is some kind
of truncation, which it is not: in the testcase
(which does fp to i1), either the fp value converts
to 0 or 1 or the result is undefined, which is
quite different to truncation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58991 91177308-0d34-0410-b5e6-96231b3b80d8
This is Chris' patch from the PR, modified to realize that
SETUGT/SETULT occur legitimately with integers, plus
two fixes in LegalizeDAG to pass a valid result type into
LegalizeSetCC. The argument of TLI.getSetCCResultType is
ignored on PPC, but I think I'm following usage elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58871 91177308-0d34-0410-b5e6-96231b3b80d8
the condition for a BRCOND, according to what is
returned by getSetCCResultContents. Since all
targets return the same thing (ZeroOrOneSetCCResult),
this should be harmless! The point is that all over
the place the result of SETCC is fed directly into
BRCOND. On machines for which getSetCCResultContents
returns ZeroOrNegativeOneSetCCResult, this is a
sign-extended boolean. So it seems dangerous to
also feed BRCOND zero-extended booleans in some
circumstances - for example, when promoting the
condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58861 91177308-0d34-0410-b5e6-96231b3b80d8
(e.g. a bitfield test) narrow the load as much as possible.
The has the potential to avoid unnecessary partial-word
load-after-store conflicts, which cause stalls on several targets.
Also a size win on x86 (testb vs testl).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58825 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM IR code and not in the selection DAG ISel. This is a cleaner solution.
- Fix the heuristic for determining if protectors are necessary. The previous
one wasn't checking the proper type size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58824 91177308-0d34-0410-b5e6-96231b3b80d8
- Get rid of "HasStackProtector" in MachineFrameInfo.
- Modify intrinsics to tell which are doing what with memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58799 91177308-0d34-0410-b5e6-96231b3b80d8
- stackprotector_prologue creates a stack object and stores the guard there.
- stackprotector_epilogue reads the stack guard from the stack position created
by stackprotector_prologue.
- The PrologEpilogInserter was changed to make sure that the stack guard is
first on the stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58791 91177308-0d34-0410-b5e6-96231b3b80d8
sized integers like i129, and also reduce the number
of assumptions made about how vaarg is implemented.
This still doesn't work correctly for small integers
like (eg) i1 on x86, since x86 passes each of them
(essentially an i8) in a 4 byte stack slot, so the
pointer needs to be advanced by 4 bytes not by 1 byte
as now. But this is no longer a LegalizeTypes problem
(it was also wrong in LT before): it is a bug in the
operation expansion in LegalizeDAG: now LegalizeTypes
turns an i1 vaarg into an i8 vaarg which would work
fine if only the i8 vaarg was turned into correct code
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58635 91177308-0d34-0410-b5e6-96231b3b80d8
type for the shift amount type. Add a check
that shifts and rotates use the type returned
by getShiftAmountTy for the amount. This
exposed some problems in CellSPU and PPC,
which have already been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58455 91177308-0d34-0410-b5e6-96231b3b80d8
other day that PPC custom lowering could create
a BUILD_PAIR of two f64 with a result type of...
f64! - already fixed). Fix a place that triggers
the sanity check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58378 91177308-0d34-0410-b5e6-96231b3b80d8
is morphed by AnalyzeNewNode into a previously
processed node, and different result values of
that node are remapped to values with different
nodes, then we could end up using wrong values
here [we were assuming that all results remap
to values with the same underlying node]. This
seems theoretically possible, but I don't have
a testcase. The meat of the patch is in the
changes to AnalyzeNewNode/AnalyzeNewValue and
ReplaceNodeWith. While there, I changed names
like RemapNode to RemapValue, since it really
remaps values. To tell the truth, I would be
much happier if we were only remapping nodes
(it would simplify a bunch of logic, and allow
for some cute speedups) but I haven't yet worked
out how to do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58372 91177308-0d34-0410-b5e6-96231b3b80d8
ppcf128 to i32 conversion and expand it into a code
sequence like in LegalizeDAG. This needs custom
ppc lowering of FP_ROUND_INREG, so turn that on and
make it work with LegalizeTypes. Probably PPC should
simply custom lower the original conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58329 91177308-0d34-0410-b5e6-96231b3b80d8
id could end up being wrong mostly because of
forgetting to remap new nodes that morphed into
processed nodes through CSE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58323 91177308-0d34-0410-b5e6-96231b3b80d8
(and a bunch of other node types). While there, I
added a doNotCSE predicate and used it to reduce code
duplication (some of the duplicated code was wrong...).
This fixes ARM/cse-libcalls.ll when using LegalizeTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58249 91177308-0d34-0410-b5e6-96231b3b80d8
worklist twice: UpdateNodeOperands could morph
a new node into a node already on the worklist.
We would then recalculate the NodeId for this
existing node and add it to the worklist. The
testcase is ARM/cse-libcalls.ll, the problem
showing up once UpdateNodeOperands is taught to
do CSE for calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58246 91177308-0d34-0410-b5e6-96231b3b80d8
may return i8, which can result in SELECT nodes for
which the type of the condition is i8, but there are
no patterns for select with i8 condition. Tweak the
LegalizeTypes logic to avoid this as much as possible.
This isn't a real fix because it is still perfectly
possible to end up with such select nodes - CellSPU
needs to be fixed IMHO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57968 91177308-0d34-0410-b5e6-96231b3b80d8
that is not of type MVT::i1 in SELECT and SETCC nodes.
Relax the LegalizeTypes SELECT condition promotion
sanity checks to allow other condition types than i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57966 91177308-0d34-0410-b5e6-96231b3b80d8
to have a different type to the vector element
type. This should be fairly harmless because in
the past guys like this were being built all over
the place (and were cleaned up when I added this
check). The reason for relaxing this check is
that it helps LegalizeTypes legalize vector
shuffles: the mask is a BUILD_VECTOR that it is
*not always possible* to legalize while keeping it
a BUILD_VECTOR (vector_shuffle requires the mask
to be a BUILD_VECTOR, as opposed to a vector with
the right vector type). With this check it is even
harder to legalize the mask - turning the check off
means that LegalizeTypes manages to legalize almost
all vector shuffles encountered in practice. The
correct solution is to change vector_shuffle to be a
variadic node with the mask built into it as operands.
While waiting for that change, this hack stops the
problem with vector_shuffle from blocking the turning
on of LegalizeTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57965 91177308-0d34-0410-b5e6-96231b3b80d8
The same one Apple gcc uses, faster. Also gets the
extreme case in gcc.c-torture/execute/ieee/rbug.c
correct which we weren't before; this is not
sufficient to get the test to pass though, there
is another bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57926 91177308-0d34-0410-b5e6-96231b3b80d8
in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57885 91177308-0d34-0410-b5e6-96231b3b80d8
for strange asm conditions earlier. In this case, we have a
double being passed in an integer reg class. Convert to like
sized integer register so that we allocate the right number
for the class (two i32's for the f64 in this case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57862 91177308-0d34-0410-b5e6-96231b3b80d8
result type when the result type is legal but
not the operand type. Add additional support
for EXTRACT_SUBVECTOR and CONCAT_VECTORS,
needed to handle such cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57840 91177308-0d34-0410-b5e6-96231b3b80d8
the condition of a SELECT node. Make sure that the
correct extension type (any-, sign- or zero-extend)
is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57836 91177308-0d34-0410-b5e6-96231b3b80d8
elements. Otherwise LegalizeTypes will, reasonably
enough, legalize the mask, which may result in it
no longer being a BUILD_VECTOR node (LegalizeDAG
simply ignores the legality or not of vector masks).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57782 91177308-0d34-0410-b5e6-96231b3b80d8
the previous patch this one actually passes make check.
"Fix PR2356 on PowerPC: if we have an input and output that are tied together
that have different sizes (e.g. i32 and i64) make sure to reserve registers for
the bigger operand."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57771 91177308-0d34-0410-b5e6-96231b3b80d8
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57748 91177308-0d34-0410-b5e6-96231b3b80d8
array. Improve some minor comments, refactor some helpers in
AsmOperandInfo. No functionality change for valid code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57686 91177308-0d34-0410-b5e6-96231b3b80d8
shift counts, and patterns that match dynamic shift counts
when the subtract is obscured by a truncate node.
Add DAGCombiner support for recognizing rotate patterns
when the shift counts are defined by truncate nodes.
Fix and simplify the code for commuting shld and shrd
instructions to work even when the given instruction doesn't
have a parent, and when the caller needs a new instruction.
These changes allow LLVM to use the shld, shrd, rol, and ror
instructions on x86 to replace equivalent code using two
shifts and an or in many more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57662 91177308-0d34-0410-b5e6-96231b3b80d8
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57542 91177308-0d34-0410-b5e6-96231b3b80d8
- Move the EH landing-pad code and adjust it so that it works
with FastISel as well as with SDISel.
- Add FastISel support for @llvm.eh.exception and
@llvm.eh.selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57539 91177308-0d34-0410-b5e6-96231b3b80d8
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57521 91177308-0d34-0410-b5e6-96231b3b80d8
parameters instead of raw Constants. This prevents the constants from
being selected by the isel pass, fixing PR2735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57385 91177308-0d34-0410-b5e6-96231b3b80d8