that used this header to select a scheduling policy should
use SchedulerRegistry.h instead (llvm-gcc and clang were
updated a while ago).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63934 91177308-0d34-0410-b5e6-96231b3b80d8
support GraphViz, I've been using the foo->dump() facility. This
patch is a minor rewrite to the SelectionDAG dump() stuff to make it a
little more helpful. The existing foo->dump() functionality does not
change; this patch adds foo->dumpr(). All of this is only useful when
running LLVM under a debugger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63736 91177308-0d34-0410-b5e6-96231b3b80d8
information. This eliminates the need for the Flags field in MemSDNode,
so this makes LoadSDNode and StoreSDNode smaller. Also, it makes
FoldingSetNodeIDs for loads and stores two AddIntegers smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63577 91177308-0d34-0410-b5e6-96231b3b80d8
Live interval reconstruction needs to account for this, and scour its maps to
prevent dangling references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63558 91177308-0d34-0410-b5e6-96231b3b80d8
crashes or wrong code with codegen of large integers:
eliminate the legacy getIntegerVTBitMask and
getIntegerVTSignBit methods, which returned their
value as a uint64_t, so couldn't handle huge types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63494 91177308-0d34-0410-b5e6-96231b3b80d8
returned by getShiftAmountTy may be too small
to hold shift values (it is an i8 on x86-32).
Before and during type legalization, use a large
but legal type for shift amounts: getPointerTy;
afterwards use getShiftAmountTy, fixing up any
shift amounts with a big type during operation
legalization. Thanks to Dan for writing the
original patch (which I shamelessly pillaged).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63482 91177308-0d34-0410-b5e6-96231b3b80d8
- Modify TableGen to add the DebugLoc when calling getTargetNode.
(The light-weight wrappers are only temporary. The non-DebugLoc version will be
removed once the whole debug info stuff is finished with.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63273 91177308-0d34-0410-b5e6-96231b3b80d8
a uint64_t to verify that the value is in range for the given type,
to help catch accidental overflow. Fix a few places that relied on
getConstant implicitly truncating the value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63128 91177308-0d34-0410-b5e6-96231b3b80d8
tidy up SDUse and related code.
- Replace the operator= member functions with a set method, like
LLVM Use has, and variants setInitial and setNode, which take
care up updating use lists, like LLVM Use's does. This simplifies
code that calls these functions.
- getSDValue() is renamed to get(), as in LLVM Use, though most
places can either use the implicit conversion to SDValue or the
convenience functions instead.
- Fix some more node vs. value terminology issues.
Also, eliminate the one remaining use of SDOperandPtr, and
SDOperandPtr itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62995 91177308-0d34-0410-b5e6-96231b3b80d8
of each use in the SelectionDAG ReplaceAllUses* functions. Thanks
to Chris for spotting this opportunity.
Also, factor out code from all 5 of the ReplaceAllUses* functions
into AddNonLeafNodeToCSEMaps, which is now renamed
AddModifiedNodeToCSEMaps to more accurately reflect its purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62964 91177308-0d34-0410-b5e6-96231b3b80d8
corresponding to the "not" and "vnot" PatFrags. Use the new method
in some places where it seems appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62768 91177308-0d34-0410-b5e6-96231b3b80d8
elements, even if it is only to take the address. Test:
break-anti-dependencies.ll with ENABLE_EXPENSIVE_CHECKS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62576 91177308-0d34-0410-b5e6-96231b3b80d8
SDNode subclasses to keep state that requires non-trivial
destructors, however it was already effectively impossible,
since the destructor isn't actually ever called. There currently
aren't any SDNode subclasses affected by this, and in general
it's desireable to keep SDNode objects light-weight.
This eliminates the last virtual member function in the SDNode
class, so it eliminates the need for a vtable pointer, making
SDNode smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62539 91177308-0d34-0410-b5e6-96231b3b80d8
and every other instruction in their blocks to keep the terminator
instructions at the end, teach the post-RA scheduler how to operate
on ranges of instructions, and exclude terminators from the range
of instructions that get scheduled.
Also, exclude mid-block labels, such as EH_LABEL instructions, and
schedule code before them separately from code after them. This
fixes problems with the post-RA scheduler moving code past
EH_LABELs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62366 91177308-0d34-0410-b5e6-96231b3b80d8
For example, PIC16 needs to break a long or int constant into mulitple parts and emit multiple directives. So Allow targets to overried EmitConstantValueOnly().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62301 91177308-0d34-0410-b5e6-96231b3b80d8
a new toy hazard recognizier heuristic which attempts to direct the
scheduler to avoid clumping large groups of loads or stores too densely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62291 91177308-0d34-0410-b5e6-96231b3b80d8
loops, hoisting instructions all the way out in one step rather
than hoisting them one nest level at a time. Also, make a few
other code simplifications. This speeds up MachineLICM
by several fold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62283 91177308-0d34-0410-b5e6-96231b3b80d8
and into the ScheduleDAGInstrs class, so that they don't get
destructed and re-constructed for each block. This fixes a
compile-time hot spot in the post-pass scheduler.
To help facilitate this, tidy and do some minor reorganization
in the scheduler constructor functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62275 91177308-0d34-0410-b5e6-96231b3b80d8
Also future proof the scheduler to handle "normal" physical register dependencies. The code is not exercised yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62074 91177308-0d34-0410-b5e6-96231b3b80d8
Now Users request DwarfWriter through getAnalysisUsage() instead of creating an instance of DwarfWriter object directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61955 91177308-0d34-0410-b5e6-96231b3b80d8
v1024 = EDI // not killed
=
= EDI
One possible solution is for the coalescer to examine the sub-register live intervals in the same manner as the physical register. Another possibility is to examine defs and uses (when needed) of sub-registers. Both solutions are too expensive. For now, look for "short virtual intervals" and scan instructions to look for conflict instead.
This is a small win on x86-64. e.g. It shaves 403.gcc by ~80 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61847 91177308-0d34-0410-b5e6-96231b3b80d8
own OpActionsCapacity magic number; it can just use ISD::BUILTIN_OP_END,
as long as it takes care to round up when needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61733 91177308-0d34-0410-b5e6-96231b3b80d8
instructions to avoid copies, because TwoAddressInstructionPass
also does this optimization. The scheduler's version didn't
account for live-out values, which resulted in spurious commutes
and missed opportunities.
Now, TwoAddressInstructionPass handles all the opportunities,
instead of just those that the scheduler missed. The result is
usually the same, though there are occasional trivial differences
resulting from the avoidance of spurious commutes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61611 91177308-0d34-0410-b5e6-96231b3b80d8
This removes all the _8, _16, _32, and _64 opcodes and replaces each
group with an unsuffixed opcode. The MemoryVT field of the AtomicSDNode
is now used to carry the size information. In tablegen, the size-specific
opcodes are replaced by size-independent opcodes that utilize the
ability to compose them with predicates.
This shrinks the per-opcode tables and makes the code that handles
atomics much more concise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61389 91177308-0d34-0410-b5e6-96231b3b80d8
reallocations. We don't do cloning on MachineInstr schedule DAGs,
but this is a worthwhile sanity check regardless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61343 91177308-0d34-0410-b5e6-96231b3b80d8
172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61259 91177308-0d34-0410-b5e6-96231b3b80d8
argument. Nothing was using it, and it set the MBB member without
calling enterBasicBlock, which was problematic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61234 91177308-0d34-0410-b5e6-96231b3b80d8
First step to resolve this is, record file name and directory directly in debug info for various debug entities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61164 91177308-0d34-0410-b5e6-96231b3b80d8
computation code. Also, avoid adding output-depenency edges when both
defs are dead, which frequently happens with EFLAGS defs.
Compute Depth and Height lazily, and always in terms of edge latency
values. For the schedulers that don't care about latency, edge latencies
are set to 1.
Eliminate Cycle and CycleBound, and LatencyPriorityQueue's Latencies array.
These are all subsumed by the Depth and Height fields.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61073 91177308-0d34-0410-b5e6-96231b3b80d8
node latencies. Use CalcLatency instead of manual code in
CalculatePriorities to keep it consistent. Previously it
computed slightly different results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60817 91177308-0d34-0410-b5e6-96231b3b80d8
- Emit DW_AT_byte_size for struct and union of size zero.
- Emit DW_AT_declaration for forward type declaration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60812 91177308-0d34-0410-b5e6-96231b3b80d8
The Cost field is removed. It was only being used in a very limited way,
to indicate when the scheduler should attempt to protect a live register,
and it isn't really needed to do that. If we ever want the scheduler to
start inserting copies in non-prohibitive situations, we'll have to
rethink some things anyway.
A Latency field is added. Instead of giving each node a single
fixed latency, each edge can have its own latency. This will eventually
be used to model various micro-architecture properties more accurately.
The PointerIntPair class and an internal union are now used, which
reduce the overall size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60806 91177308-0d34-0410-b5e6-96231b3b80d8
target-independent way of determining overflow on multiplication. It's very
tricky. Patch by Zoltan Varga!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60800 91177308-0d34-0410-b5e6-96231b3b80d8
essential problem was that the DAG can contain
random unused nodes which were never analyzed.
When remapping a value of a node being processed,
such a node may become used and need to be analyzed;
however due to operands being transformed during
analysis the node may morph into a different one.
Users of the morphing node need to be updated, and
this wasn't happening. While there I added a bunch
of documentation and sanity checks, so I (or some
other poor soul) won't have to scratch their head
over this stuff so long trying to remember how it
was all supposed to work next time some obscure
problem pops up! The extra sanity checking exposed
a few places where invariants weren't being preserved,
so those are fixed too. Since some of the sanity
checking is expensive, I added a flag to turn it
on. It is also turned on when building with
ENABLE_EXPENSIVE_CHECKS=1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60797 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in x86 address mode folding. Also, make
getRegForValue return 0 for illegal types even if it has a
ValueMap for them, because Argument values are put in the
ValueMap. This fixes PR3181.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60696 91177308-0d34-0410-b5e6-96231b3b80d8
the frame reference. This will help post-RA scheduling determine
that spills to distinct stack slots are independent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60486 91177308-0d34-0410-b5e6-96231b3b80d8
MERGE_VALUES node with only one operand, so get
rid of special code that only existed to handle
that possibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60349 91177308-0d34-0410-b5e6-96231b3b80d8
and the LiveInterval.h top-level comment and accordingly. This fixes blocks
having spurious live-in registers in boundary cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60092 91177308-0d34-0410-b5e6-96231b3b80d8
introduce any new spilling; it just uses unused registers.
Refactor the SUnit topological sort code out of the RRList scheduler and
make use of it to help with the post-pass scheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59999 91177308-0d34-0410-b5e6-96231b3b80d8
simplify header dependencies for front-ends that just want to choose
a scheduler and don't need all the scheduling machinery declarations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59978 91177308-0d34-0410-b5e6-96231b3b80d8
(this doesn't happen that often, since most code
does not use illegal types) then follow it by a
DAG combiner run that is allowed to generate
illegal operations but not illegal types. I didn't
modify the target combiner code to distinguish like
this between illegal operations and illegal types,
so it will not produce illegal operations as well
as not producing illegal types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59960 91177308-0d34-0410-b5e6-96231b3b80d8
"It simplifies the type legalization part a bit, and produces better code by
teaching SelectionDAG about the extra bits in an i8 SADDO/UADDO node. In
essence, I spontaneously decided that on x86 this i8 boolean result would be
either 0 or 1, and on other platforms 0/1 or 0/-1, depending on whether the
platform likes it's boolean zero extended or sign extended."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59864 91177308-0d34-0410-b5e6-96231b3b80d8
because the boolean it returns to indicate an overflow may not be treated like
as a flag. It could be stored to memory, for instance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59780 91177308-0d34-0410-b5e6-96231b3b80d8
"ISD::ADDO". ISD::ADDO is lowered into a target-independent form that does the
addition and then checks if the result is less than one of the operands. (If it
is, then there was an overflow.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59779 91177308-0d34-0410-b5e6-96231b3b80d8
some of the latency computation logic out of the SDNode
ScheduleDAG code into a TargetInstrItineraries helper method
to help with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59761 91177308-0d34-0410-b5e6-96231b3b80d8
- When scavenging a register, in addition to the spill, insert a restore before the first use.
- Abort if client is looking to scavenge a register even when a previously scavenged register is still live.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59697 91177308-0d34-0410-b5e6-96231b3b80d8
is currently off by default, and can be enabled with
-disable-post-RA-scheduler=false.
This doesn't have a significant impact on most code yet because it doesn't
yet do anything to address anti-dependencies and it doesn't attempt to
disambiguate memory references. Also, several popular targets
don't have pipeline descriptions yet.
The majority of the changes here are splitting the SelectionDAG-specific
code out of ScheduleDAG, so that ScheduleDAG can be moved to
libLLVMCodeGen.a. The interface between ScheduleDAG-using code and
the rest of the scheduling code is somewhat rough and will evolve.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59676 91177308-0d34-0410-b5e6-96231b3b80d8
fairly conservative; it doesn't do alias-analysis queries and it doesn't
attempt to break anti-dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59324 91177308-0d34-0410-b5e6-96231b3b80d8
to carry a SmallVector of flagged nodes, just calculate the flagged nodes
dynamically when they are needed.
The local-liveness change is due to a trivial scheduling change where
the scheduler arbitrary decision differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59273 91177308-0d34-0410-b5e6-96231b3b80d8
virtual registers possibly having multiple kills while still
being defined and killed in the same block. If LiveIntervals
is manually re-run after two-address lowering, it currently
does add extra kills to two-address instructions, but this
is considered a bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59194 91177308-0d34-0410-b5e6-96231b3b80d8
special-purpose hook to a new pass. Also, add check to see if any
x87 virtual registers are used, to avoid doing any work in the
common case that no x87 code is needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59190 91177308-0d34-0410-b5e6-96231b3b80d8
no longer records a unique defining instruction, and virtual
registers may have multiple kills while still being defined
and killed in the same block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59145 91177308-0d34-0410-b5e6-96231b3b80d8
argument instead of taking the SelectionDAG's TargetMachine. This is
needed for some upcoming scheduler changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59055 91177308-0d34-0410-b5e6-96231b3b80d8
support targets that support these conversions. Users should avoid using
this node as the current targets don't generating code for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59001 91177308-0d34-0410-b5e6-96231b3b80d8
release-asserts build:
llvm/CodeGen/SelectionDAGNodes.h:1298: warning: control may reach end of non-void function 'unsigned int llvm::MVT::getSizeInBits() const' being inlined
what an unhelpful warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58957 91177308-0d34-0410-b5e6-96231b3b80d8
FIXME: it seems, that most of targets don't support
offsets wrt CPI/GlobalAddress', was it intentional?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58917 91177308-0d34-0410-b5e6-96231b3b80d8
the condition for a BRCOND, according to what is
returned by getSetCCResultContents. Since all
targets return the same thing (ZeroOrOneSetCCResult),
this should be harmless! The point is that all over
the place the result of SETCC is fed directly into
BRCOND. On machines for which getSetCCResultContents
returns ZeroOrNegativeOneSetCCResult, this is a
sign-extended boolean. So it seems dangerous to
also feed BRCOND zero-extended booleans in some
circumstances - for example, when promoting the
condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58861 91177308-0d34-0410-b5e6-96231b3b80d8
- Get rid of "HasStackProtector" in MachineFrameInfo.
- Modify intrinsics to tell which are doing what with memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58799 91177308-0d34-0410-b5e6-96231b3b80d8
- stackprotector_prologue creates a stack object and stores the guard there.
- stackprotector_epilogue reads the stack guard from the stack position created
by stackprotector_prologue.
- The PrologEpilogInserter was changed to make sure that the stack guard is
first on the stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58791 91177308-0d34-0410-b5e6-96231b3b80d8
dead nodes, but in this case its missing one. Fixing the DAGCombiner
is desirable, but it's somewhat involved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58777 91177308-0d34-0410-b5e6-96231b3b80d8
priority function. Instead, just iterate over the AllNodes list, which is
already in topological order. This eliminates a fair amount of bookkeeping,
and speeds up the isel phase by about 15% on many testcases.
The impact on most targets is that AddToISelQueue calls can be simply removed.
In the x86 target, there are two additional notable changes.
The rule-bending AND+SHIFT optimization in MatchAddress that creates new
pre-isel nodes during isel is now a little more verbose, but more robust.
Instead of either creating an invalid DAG or creating an invalid topological
sort, as it has historically done, it can now just insert the new nodes into
the node list at a position where they will be consistent with the topological
ordering.
Also, the address-matching code has logic that checked to see if a node was
"already selected". However, when a node is selected, it has all its uses
taken away via ReplaceAllUsesWith or equivalent, so it won't recieve any
further visits from MatchAddress. This code is now removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58748 91177308-0d34-0410-b5e6-96231b3b80d8
- Use enums instead of magic numbers.
- Rework algorithm to use the bytes size from the target to determine when to
emit stack protectors.
- Get rid of "propolice" in any comments.
- Renamed an option to its expanded form.
- Other miscellanenous changes.
More changes will come after this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58723 91177308-0d34-0410-b5e6-96231b3b80d8
* The prologue is modified to read the __stack_chk_guard global and insert it
onto the stack.
* The epilogue is modified to read the stored guard from the stack and compare
it to the original __stack_chk_guard value. If they differ, then the
__stack_chk_fail() function is called.
* The stack protector needs to be first on the stack (after the parameters) to
catch any stack-smashing activities.
Front-end support will follow after a round of beta testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58673 91177308-0d34-0410-b5e6-96231b3b80d8
bits, use a union of a SimpleValueType enum and a regular Type*.
This increases the size of MVT on 64-bit hosts from 32 bits to 64 bits.
In most cases, this doesn't add significant overhead. There are places
in codegen that use arrays of MVTs, so these are now larger, but
they're small in common cases.
This eliminates restrictions on the size of integer types and vector
types that can be represented in codegen. As the included testcase
demonstrates, it's now possible to codegen very large add operations.
There are still some complications with using very large types. PR2880
is still open so they can't be used as return values on normal targets,
there are no libcalls defined for very large integers so operations
like multiply and divide aren't supported.
This also introduces a minimal tablgen Type library, capable of
handling IntegerType and VectorType. This will allow parts of
TableGen that don't depend on using SimpleValueType values to handle
arbitrary integer and vector types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58623 91177308-0d34-0410-b5e6-96231b3b80d8
other day that PPC custom lowering could create
a BUILD_PAIR of two f64 with a result type of...
f64! - already fixed). Fix a place that triggers
the sanity check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58378 91177308-0d34-0410-b5e6-96231b3b80d8
flag. Then in a debugger developers can set breakpoints at these calls
to see waht is about to be selected and what the resulting subgraph
looks like. This really helps when debugging instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58278 91177308-0d34-0410-b5e6-96231b3b80d8
that is not of type MVT::i1 in SELECT and SETCC nodes.
Relax the LegalizeTypes SELECT condition promotion
sanity checks to allow other condition types than i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57966 91177308-0d34-0410-b5e6-96231b3b80d8
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57748 91177308-0d34-0410-b5e6-96231b3b80d8
because it declares a std::vector<MachineMove>, and strict
concept checking requires the definition of MachineMove to be
available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57617 91177308-0d34-0410-b5e6-96231b3b80d8
- Move the EH landing-pad code and adjust it so that it works
with FastISel as well as with SDISel.
- Add FastISel support for @llvm.eh.exception and
@llvm.eh.selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57539 91177308-0d34-0410-b5e6-96231b3b80d8
expand to multiple basic blocks, in which case fast-isel
needs to informed of which block to use as it resumes
inserting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57040 91177308-0d34-0410-b5e6-96231b3b80d8
can be used when deciding if a block can transfer control to another
via a fall-through instead of a branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56968 91177308-0d34-0410-b5e6-96231b3b80d8
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56867 91177308-0d34-0410-b5e6-96231b3b80d8
its size). Adjust various lowering functions to
pass this info through from CallInst. Use it to
implement sseregparm returns on X86. Remove
X86_ssecall calling convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56677 91177308-0d34-0410-b5e6-96231b3b80d8
information is in an unreachable block, then it's possible that the high/low pc
values won't be set for the dwarf information. E.g., this function:
void abort(void) __attribute__((__noreturn__));
void dead_beef(void) __attribute__ ((noreturn));
int *b;
void dead_beef(void) {
*b=0xdeadbeef;
abort();
}
has a call to "@llvm.dbg.region.end" only in the unreachable block:
define void @dead_beef() noreturn nounwind {
entry:
call void @llvm.dbg.func.start(...)
call void @llvm.dbg.stoppoint(...)
...
call void @abort( ) noreturn nounwind
unreachable
return: ; No predecessors!
call void @llvm.dbg.stoppoint(...)
call void @llvm.dbg.region.end(...)
ret void
}
The dwarf information emitted is something like:
0x00000084: TAG_subprogram [5]
AT_name( "dead_beef" )
AT_external( 0x01 )
AT_prototyped( 0x01 )
AT_decl_file( 0x01 )
AT_decl_line( 0x08 )
Note that this is *not* the best fix for this problem, but a band-aid for an
gaping wound. This code needs to be changed when we revamp our debugging
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56628 91177308-0d34-0410-b5e6-96231b3b80d8
meaning sse_regparm (i.e. float/double values go
in XMM0 instead of ST0). Update documentation
to reflect reality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56619 91177308-0d34-0410-b5e6-96231b3b80d8
