was centered around the premise of laying out a loop in a chain, and
then rotating that chain. This is good for preserving contiguous layout,
but bad for actually making sane rotations. In order to keep it safe,
I had to essentially make it impossible to rotate deeply nested loops.
The information needed to correctly reason about a deeply nested loop is
actually available -- *before* we layout the loop. We know the inner
loops are already fused into chains, etc. We lose information the moment
we actually lay out the loop.
The solution was the other alternative for this algorithm I discussed
with Benjamin and some others: rather than rotating the loop
after-the-fact, try to pick a profitable starting block for the loop's
layout, and then use our existing layout logic. I was worried about the
complexity of this "pick" step, but it turns out such complexity is
needed to handle all the important cases I keep teasing out of benchmarks.
This is, I'm afraid, a bit of a work-in-progress. It is still
misbehaving on some likely important cases I'm investigating in Olden.
It also isn't really tested. I'm going to try to craft some interesting
nested-loop test cases, but it's likely to be extremely time consuming
and I don't want to go there until I'm sure I'm testing the correct
behavior. Sadly I can't come up with a way of getting simple, fine
grained test cases for this logic. We need complex loop structures to
even trigger much of it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145183 91177308-0d34-0410-b5e6-96231b3b80d8
heavily on AnalyzeBranch. That routine doesn't behave as we want given
that rotation occurs mid-way through re-ordering the function. Instead
merely check that there are not unanalyzable branching constructs
present, and then reason about the CFG via successor lists. This
actually simplifies my mental model for all of this as well.
The concrete result is that we now will rotate more loop chains. I've
added a test case from Olden highlighting the effect. There is still
a bit more to do here though in order to regain all of the performance
in Olden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145179 91177308-0d34-0410-b5e6-96231b3b80d8
trampoline forms. Both of these were correct in LLVM 3.0, and we don't
need to support LLVM 2.9 and earlier in mainline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145174 91177308-0d34-0410-b5e6-96231b3b80d8
I think this is the last of autoupgrade that can be removed in 3.1.
Can the atomic upgrade stuff also go?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145169 91177308-0d34-0410-b5e6-96231b3b80d8
pass. This is designed to achieve one of the important optimizations
that the old code placement pass did, but more simply.
This is a somewhat rough and *very* conservative version of the
transform. We could get a lot fancier here if there are profitable cases
to do so. In particular, this only looks for a single pattern, it
insists that the loop backedge being rotated away is the last backedge
in the chain, and it doesn't provide any means of doing better in-loop
placement due to the rotation. However, it appears that it will handle
the important loops I am finding in the LLVM test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145158 91177308-0d34-0410-b5e6-96231b3b80d8
was returning incorrect values in rare cases, and incorrectly marking
exact conversions as inexact in some more common cases. Fixes PR11406, and a
missed optimization in test/CodeGen/X86/fp-stack-O0.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145141 91177308-0d34-0410-b5e6-96231b3b80d8
tablegen patterns for scalar FMA4 operations and intrinsic. Also
add tests for vfmaddsd.
Patch by Jan Sjodin
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145133 91177308-0d34-0410-b5e6-96231b3b80d8
need lots of fanciness around retaining a reference to a Chain's slot in
the BlockToChain map, but that's all gone now. We can just go directly
to allocating the new chain (which will update the mapping for us) and
using it.
Somewhat gross mechanically generated test case replicates the issue
Duncan spotted when actually testing this out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145120 91177308-0d34-0410-b5e6-96231b3b80d8
conflicts, we should only be adding the first block of the chain to the
list, lest we try to merge into the middle of that chain. Most of the
places we were doing this we already happened to be looking at the first
block, but there is no reason to assume that, and in some cases it was
clearly wrong.
I've added a couple of tests here. One already worked, but I like having
an explicit test for it. The other is reduced from a test case Duncan
reduced for me and used to crash. Now it is handled correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145119 91177308-0d34-0410-b5e6-96231b3b80d8
and positive: positive, because it could be directly computed to be positive;
negative, because the nsw flags means it is either negative or undefined (the
multiplication always overflowed).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145104 91177308-0d34-0410-b5e6-96231b3b80d8
Before:
movabsq $4294967296, %rax ## encoding: [0x48,0xb8,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00]
testq %rax, %rdi ## encoding: [0x48,0x85,0xf8]
jne LBB0_2 ## encoding: [0x75,A]
After:
btq $32, %rdi ## encoding: [0x48,0x0f,0xba,0xe7,0x20]
jb LBB0_2 ## encoding: [0x72,A]
btq is usually slower than testq because it doesn't fuse with the jump, but here we're better off
saving one register and a giant movabsq.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145103 91177308-0d34-0410-b5e6-96231b3b80d8
further. This invariant just wasn't going to work in the face of
unanalyzable branches; we need to be resillient to the phenomenon of
chains poking into a loop and poking out of a loop. In fact, we already
were, we just needed to not assert on it.
This was found during a bootstrap with block placement turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145100 91177308-0d34-0410-b5e6-96231b3b80d8
VSHUFPS/VSHUFPD instructions while lowering VECTOR_SHUFFLE node. I check a commuted VSHUFP mask.
The patch was reviewed by Bruno.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145099 91177308-0d34-0410-b5e6-96231b3b80d8
successors, they just are all landing pad successors. We handle this the
same way as no successors. Comments attached for the next person to wade
through here and another lovely test case courtesy of Benjamin Kramer's
bugpoint reduction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145098 91177308-0d34-0410-b5e6-96231b3b80d8
This was a bug in keeping track of the available domains when merging
domain values.
The wrong domain mask caused ExecutionDepsFix to try to move VANDPSYrr
to the integer domain which is only available in AVX2.
Also add an assertion to catch future attempts at emitting AVX2
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145096 91177308-0d34-0410-b5e6-96231b3b80d8
reversed in the function's original ordering, and we happened to
encounter it while handling an outer unnatural CFG structure.
Thanks to the test case reduced from GCC's source by Benjamin Kramer.
This may also fix a crasher in gzip that Duncan reduced for me, but
I haven't yet gotten to testing that one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145094 91177308-0d34-0410-b5e6-96231b3b80d8
updateTerminator code didn't correctly handle EH terminators in one very
specific case. AnalyzeBranch would find no terminator instruction, and
so the fallback in updateTerminator is to assume fallthrough. This is
correct, but the destination of the fallthrough was assumed to be the
first successor.
This is *almost always* true, but in certain cases the loop
transformations will cause the landing pad to be the first successor!
Instead of this brittle logic, actually look through the successors for
a non-landing-pad accessor, and to assert if more than one is found.
This will hopefully fix some (if not all) of the self host miscompiles
with block placement. Thanks to Benjamin Kramer for reporting, Nick
Lewycky for an initial stab at a reduction, and Duncan for endless
advice on EH (which I know nothing about) as well as reviewing the
actual fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145062 91177308-0d34-0410-b5e6-96231b3b80d8
properly account for the *global* probability of the edge being taken.
This manifested as a very large number of unconditional branches to
blocks being merged against the CFG even though they weren't
particularly hot within the CFG.
The fix is to check whether the edge being merged is both locally hot
relative to other successors for the source block, and globally hot
compared to other (unmerged) predecessors of the destination block.
This introduces a new crasher on GCC single-source, but it's currently
behind a flag, and Ben has offered to work on the reduction. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145010 91177308-0d34-0410-b5e6-96231b3b80d8
is actually being tested. Also add some FileCheck goodness to much more
carefully ensure that the result is the desired result. Before this test
would only have failed through an assert failure if the underlying fix
were reverted.
Also, add some weight metadata and a comment explaining exactly what is
going on to a trick section of the test case. Originally, we were
getting very unlucky and trying to form a block chain that isn't
actually profitable. I'm working on a fix to avoid forming these
unprofitable chains, and that would also have masked any failure from
this test case. The easy solution is to add some metadata that makes it
*really* profitable to form the bad chain here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145006 91177308-0d34-0410-b5e6-96231b3b80d8
formation phase and into the initial walk of the basic blocks. We
essentially pre-merge all blocks where unanalyzable fallthrough exists,
as we won't be able to update the terminators effectively after any
reorderings. This is quite a bit more principled as there may be CFGs
where the second half of the unanalyzable pair has some analyzable
predecessor that gets placed first. Then it may get placed next,
implicitly breaking the unanalyzable branch even though we never even
looked at the part that isn't analyzable. I've included a test case that
triggers this (thanks Benjamin yet again!), and I'm hoping to synthesize
some more general ones as I dig into related issues.
Also, to make this new scheme work we have to be able to handle branches
into the middle of a chain, so add this check. We always fallback on the
incoming ordering.
Finally, this starts to really underscore a known limitation of the
current implementation -- we don't consider broken predecessors when
merging successors. This can caused major missed opportunities, and is
something I'm planning on looking at next (modulo more bug reports).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144994 91177308-0d34-0410-b5e6-96231b3b80d8
The loop tree's inclusive block lists are painful and expensive to
update. (I have no idea why they're inclusive). The design was
supposed to handle this case but the implementation missed it and my
unit tests weren't thorough enough.
Fixes PR11335: loop unroll update.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144970 91177308-0d34-0410-b5e6-96231b3b80d8
The right way to check for a binary operation is
cast<BinaryOperator>. The original check: cast<Instruction> &&
numOperands() == 2 would match phi "instructions", leading to an
infinite loop in extreme corner case: a useless phi with operands
[self, constant] that prior optimization passes failed to remove,
being used in the loop by another useless phi, in turn being used by an
lshr or udiv.
Fixes PR11350: runaway iteration assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144935 91177308-0d34-0410-b5e6-96231b3b80d8
ADDs. MaxOffs is used as a threshold to limit the size of the offset. Tradeoffs
being: (1) If we can't materialize the large constant then we'll cause fast-isel
to bail. (2) Too large of an offset can't be directly encoded in the ADD
resulting in a MOV+ADD. Generally not a bad thing because otherwise we would
have had ADD+ADD, but on Thumb this turns into a MOVS+MOVT+ADD. Working on a fix
for that. (3) Conversely, too low of a threshold we'll miss opportunities to
coalesce ADDs.
rdar://10412592
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144886 91177308-0d34-0410-b5e6-96231b3b80d8
We don't (yet) have the granularity in the fixups to be specific about which
bitranges are affected. That's a future cleanup, but we're not there yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144852 91177308-0d34-0410-b5e6-96231b3b80d8
For example,
vld1.f64 {d2-d5}, [r2,:128]!
Should be equivalent to:
vld1.f64 {d2,d3,d4,d5}, [r2,:128]!
It's not documented syntax in the ARM ARM, but it is consistent with what's
accepted for VLDM/VSTM and is unambiguous in meaning, so it's a good thing to
support.
rdar://10451128
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144727 91177308-0d34-0410-b5e6-96231b3b80d8
When the 3rd operand is not a low-register, and the first two operands are
the same low register, the parser was incorrectly trying to use the 16-bit
instruction encoding.
rdar://10449281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144679 91177308-0d34-0410-b5e6-96231b3b80d8
has a reference to it. Unfortunately, that doesn't work for codegen passes
since we don't get notified of MBB's being deleted (the original BB stays).
Use that fact to our advantage and after printing a function, check if
any of the IL BBs corresponds to a symbol that was not printed. This fixes
pr11202.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144674 91177308-0d34-0410-b5e6-96231b3b80d8
These tests are actually correct, clang was miscompiling ExeDepsFix::processUses.
Evan fixed the miscompilation in r144628.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144630 91177308-0d34-0410-b5e6-96231b3b80d8
block sequence when recovering from unanalyzable control flow
constructs, *always* use the function sequence. I'm not sure why I ever
went down the path of trying to use the loop sequence, it is
fundamentally not the correct sequence to use. We're trying to preserve
the incoming layout in the cases of unreasonable control flow, and that
is only encoded at the function level. We already have a filter to
select *exactly* the sub-set of blocks within the function that we're
trying to form into a chain.
The resulting code layout is also significantly better because of this.
In several places we were ending up with completely unreasonable control
flow constructs due to the ordering chosen by the loop structure for its
internal storage. This change removes a completely wasteful vector of
basic blocks, saving memory allocation in the common case even though it
costs us CPU in the fairly rare case of unnatural loops. Finally, it
fixes the latest crasher reduced out of GCC's single source. Thanks
again to Benjamin Kramer for the reduction, my bugpoint skills failed at
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144627 91177308-0d34-0410-b5e6-96231b3b80d8
Two new TargetInstrInfo hooks lets the target tell ExecutionDepsFix
about instructions with partial register updates causing false unwanted
dependencies.
The ExecutionDepsFix pass will break the false dependencies if the
updated register was written in the previoius N instructions.
The small loop added to sse-domains.ll runs twice as fast with
dependency-breaking instructions inserted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144602 91177308-0d34-0410-b5e6-96231b3b80d8
Canonicallize on the non-suffixed form, but continue to accept assembly that
has any correctly sized type suffix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144583 91177308-0d34-0410-b5e6-96231b3b80d8
and stores capture) to permit the caller to see each capture point and decide
whether to continue looking.
Use this inside memdep to do an analysis that basicaa won't do. This lets us
solve another devirtualization case, fixing PR8908!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144580 91177308-0d34-0410-b5e6-96231b3b80d8
instructions of the two-address operands) in order to avoid inserting copies.
This fixes the few regressions introduced when the two-address hack was
disabled (without regressing the improvements).
rdar://10422688
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144559 91177308-0d34-0410-b5e6-96231b3b80d8
Constant idx case is still done in tablegen but other cases are then expanded
Fixes <rdar://problem/10435460>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144557 91177308-0d34-0410-b5e6-96231b3b80d8
the sum of the edge weights not overflowing uint32, and crashed when
they did. This is generally safe as BranchProbabilityInfo tries to
provide this guarantee. However, the CFG can get modified during codegen
in a way that grows the *sum* of the edge weights. This doesn't seem
unreasonable (imagine just adding more blocks all with the default
weight of 16), but it is hard to come up with a case that actually
triggers 32-bit overflow. Fortuately, the single-source GCC build is
good at this. The solution isn't very pretty, but its no worse than the
previous code. We're already summing all of the edge weights on each
query, we can sum them, check for an overflow, compute a scale, and sum
them again.
I've included a *greatly* reduced test case out of the GCC source that
triggers it. It's a pretty lame test, as it clearly is just barely
triggering the overflow. I'd like to have something that is much more
definitive, but I don't understand the fundamental pattern that triggers
an explosion in the edge weight sums.
The buggy code is duplicated within this file. I'll colapse them into
a single implementation in a subsequent commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144526 91177308-0d34-0410-b5e6-96231b3b80d8
get loop info structures associated with them, and so we need some way
to make forward progress selecting and placing basic blocks. The
technique used here is pretty brutal -- it just scans the list of blocks
looking for the first unplaced candidate. It keeps placing blocks like
this until the CFG becomes tractable.
The cost is somewhat unfortunate, it requires allocating a vector of all
basic block pointers eagerly. I have some ideas about how to simplify
and optimize this, but I'm trying to get the logic correct first.
Thanks to Benjamin Kramer for the reduced test case out of GCC. Sadly
there are other bugs that GCC is tickling that I'm reducing and working
on now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144516 91177308-0d34-0410-b5e6-96231b3b80d8
second algorithm, but only loosely. It is more heavily based on the last
discussion I had with Andy. It continues to walk from the inner-most
loop outward, but there is a key difference. With this algorithm we
ensure that as we visit each loop, the entire loop is merged into
a single chain. At the end, the entire function is treated as a "loop",
and merged into a single chain. This chain forms the desired sequence of
blocks within the function. Switching to a single algorithm removes my
biggest problem with the previous approaches -- they had different
behavior depending on which system triggered the layout. Now there is
exactly one algorithm and one basis for the decision making.
The other key difference is how the chain is formed. This is based
heavily on the idea Andy mentioned of keeping a worklist of blocks that
are viable layout successors based on the CFG. Having this set allows us
to consistently select the best layout successor for each block. It is
expensive though.
The code here remains very rough. There is a lot that needs to be done
to clean up the code, and to make the runtime cost of this pass much
lower. Very much WIP, but this was a giant chunk of code and I'd rather
folks see it sooner than later. Everything remains behind a flag of
course.
I've added a couple of tests to exercise the issues that this iteration
was motivated by: loop structure preservation. I've also fixed one test
that was exhibiting the broken behavior of the previous version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144495 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyAddress to handle either a 12-bit unsigned offset or the ARM +/-imm8
offsets (addressing mode 3). This enables a load followed by an integer
extend to be folded into a single load.
For example:
ldrb r1, [r0] ldrb r1, [r0]
uxtb r2, r1 =>
mov r3, r2 mov r3, r1
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144488 91177308-0d34-0410-b5e6-96231b3b80d8
It was off by default.
The new register allocators don't have the problems that made it
necessary to reallocate registers during stack slot coloring.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144481 91177308-0d34-0410-b5e6-96231b3b80d8
This test was committed with a bugfix to RemoveCopyByCommutingDef, but
that optimization is no longer triggered by this test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144470 91177308-0d34-0410-b5e6-96231b3b80d8
This test doesn't expose the issue with RAGreedy.
I filed PR11363 to track the missing InlineSpiller feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144459 91177308-0d34-0410-b5e6-96231b3b80d8
The test is checking that the output doesn't contains any 'mov '
strings. It does contain movl, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144458 91177308-0d34-0410-b5e6-96231b3b80d8
instance and a concrete inlined instance are the use of DW_TAG_subprogram
instead of DW_TAG_inlined_subroutine and the who owns the tree.
We were also omitting DW_AT_inline from the abstract roots. To fix this,
make sure we mark abstract instance roots with DW_AT_inline even when
we have only out-of-line instances referring to them with DW_AT_abstract_origin.
FileCheck is not a very good tool for tests like this, maybe we should add
a -verify mode to llvm-dwarfdump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144441 91177308-0d34-0410-b5e6-96231b3b80d8
lead to it trying to re-mark a value marked as a constant with a different value. It also appears to trigger very rarely.
Fixes PR11357.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144352 91177308-0d34-0410-b5e6-96231b3b80d8
Get the source register that isn't tied to the destination register correct,
even when the assembly source operand order is backwards.
rdar://10428630
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144322 91177308-0d34-0410-b5e6-96231b3b80d8
instruction lower optimization" in the pre-RA scheduler.
The optimization, rather the hack, was done before MI use-list was available.
Now we should be able to implement it in a better way, perhaps in the
two-address pass until a MI scheduler is available.
Now that the scheduler has to backtrack to handle call sequences. Adding
artificial scheduling constraints is just not safe. Furthermore, the hack
is not taking all the other scheduling decisions into consideration so it's just
as likely to pessimize code. So I view disabling this optimization goodness
regardless of PR11314.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144267 91177308-0d34-0410-b5e6-96231b3b80d8
The TII.foldMemoryOperand hook preserves implicit operands from the
original instruction. This is not what we want when those implicit
operands refer to the register being spilled.
Implicit operands referring to other registers are preserved.
This fixes PR11347.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144247 91177308-0d34-0410-b5e6-96231b3b80d8
Currently checks alignment and killing stores on a power of 2 boundary as this is likely
to trim the size of the earlier store without breaking large vector stores into scalar ones.
Fixes <rdar://problem/10140300>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144239 91177308-0d34-0410-b5e6-96231b3b80d8
dragonegg self-host buildbot will recover (it is complaining about object
files differing between different build stages). Original commit message:
Add a hack to the scheduler to disable pseudo-two-address dependencies in
basic blocks containing calls. This works around a problem in which
these artificial dependencies can get tied up in calling seqeunce
scheduling in a way that makes the graph unschedulable with the current
approach of using artificial physical register dependencies for calling
sequences. This fixes PR11314.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144188 91177308-0d34-0410-b5e6-96231b3b80d8
During the initial RPO traversal of the basic blocks, remember the ones
that are incomplete because of back-edges from predecessors that haven't
been visited yet.
After the initial RPO, revisit all those loop headers so the incoming
DomainValues on the back-edges can be properly collapsed.
This will properly fix execution domains on software pipelined code,
like the included test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144151 91177308-0d34-0410-b5e6-96231b3b80d8
basic blocks containing calls. This works around a problem in which
these artificial dependencies can get tied up in calling seqeunce
scheduling in a way that makes the graph unschedulable with the current
approach of using artificial physical register dependencies for calling
sequences. This fixes PR11314.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144124 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for trimming constants to GetDemandedBits. This fixes some funky
constant generation that occurs when stores are expanded for targets that don't
support unaligned stores natively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144102 91177308-0d34-0410-b5e6-96231b3b80d8
callee's responsibility to sign or zero-extend the return value. The additional
test case just checks to make sure the calls are selected (i.e., -fast-isel-abort
doesn't assert).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144047 91177308-0d34-0410-b5e6-96231b3b80d8
DomainValues that are only used by "don't care" instructions are now
collapsed to the first possible execution domain after all basic blocks
have been processed. This typically means the PS domain on x86.
For example, the vsel_i64 and vsel_double functions in sse2-blend.ll are
completely collapsed to the PS domain instead of containing a mix of
execution domains created by isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144037 91177308-0d34-0410-b5e6-96231b3b80d8
The xorps instruction is smaller than pxor, so prefer that encoding.
The ExecutionDepsFix pass will switch the encoding to pxor and xorpd
when appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143996 91177308-0d34-0410-b5e6-96231b3b80d8
zero-extend the constant integer encoding. Test case provides testing for
both call parameters and materialization of i1, i8, and i16 types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143821 91177308-0d34-0410-b5e6-96231b3b80d8
I'm going to wait for any review comments and perform some additional testing before turning this on by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143750 91177308-0d34-0410-b5e6-96231b3b80d8
Only currently done if the later store is writing to a power of 2 address or
has the same alignment as the earlier store as then its likely to not break up
large stores into smaller ones
Fixes <rdar://problem/10140300>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143630 91177308-0d34-0410-b5e6-96231b3b80d8
We've been hitting asserts in this code due to the many supported
combintions of modes (iv-rewrite/no-iv-rewrite) and IV types. This
second rewrite of the code attempts to deal with these cases systematically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143546 91177308-0d34-0410-b5e6-96231b3b80d8
it is separating the directory part from the basename of the FileName. Noticed
that this:
.file 1 "dir/foo"
when assembled got the two parts switched. Using the Mac OS X dwarfdump tool
it can be seen easily:
% dwarfdump -a a.out
include_directories[ 1] = 'foo'
Dir Mod Time File Len File Name
---- ---------- ---------- ---------------------------
file_names[ 1] 1 0x00000000 0x00000000 dir
...
Which should be:
...
include_directories[ 1] = 'dir'
Dir Mod Time File Len File Name
---- ---------- ---------- ---------------------------
file_names[ 1] 1 0x00000000 0x00000000 foo
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143521 91177308-0d34-0410-b5e6-96231b3b80d8
with the given predicate, it matches any condition and returns the
predicate - d'oh! Original commit message:
The expression icmp eq (select (icmp eq x, 0), 1, x), 0 folds to false.
Spotted by my super-optimizer in 186.crafty and 450.soplex. We really
need a proper infrastructure for handling generalizations of this kind
of thing (which occur a lot), however this case is so simple that I decided
to go ahead and implement it directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143318 91177308-0d34-0410-b5e6-96231b3b80d8
On x86: (shl V, 1) -> add V,V
Hardware support for vector-shift is sparse and in many cases we scalarize the
result. Additionally, on sandybridge padd is faster than shl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143311 91177308-0d34-0410-b5e6-96231b3b80d8
If all of the inputs are zero/any_extended, create a new simple BV
which can be further optimized by other BV optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143297 91177308-0d34-0410-b5e6-96231b3b80d8
