Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-3 that was available in MIPS32R2.
To limit the number of tests required, only one 32-bit and one 64-bit ISA
prior to MIPS32/MIPS64 are tested.
rdhwr has been deliberately left without an ISA annotation for now. This is
because the assembler and CodeGen disagree on when the instruction is
available. Strictly speaking, it is only available in MIPS32r2 and
MIPS64r2. However, it is emulated by a kernel trap on earlier ISA's and is
necessary for TLS so CodeGen should emit it on older ISA's too.
Depends on D3696
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208690 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The 'mul' line of the test is temporarily commented out because it currently matches the MIPS32 mul instead of the MIPS32r6 mul. This line will be uncommented when we disable the MIPS32 mul on MIPS32r6.
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208576 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-V that was available in MIPS32R2
Most of these instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now. It happens
because many of the MIPS V instructions have not been implemented.
Depends on D3694
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3695
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208546 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DCL[ZO] are now correctly marked as being MIPS64 instructions. This has no
effect on the CodeGen tests since expansion of i64 prevented their use
anyway.
The check for MIPS16 to prevent the use of CLZ no longer prevents DCLZ as
well. This is not a functional change since DCLZ is still prohibited by
being a MIPS64 instruction (MIPS16 is only compatible with MIPS32).
No functional change
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3694
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208544 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
dsbh and dshd are not available on Mips32r2. No codegen test changes
required since expansion of i64 prevented the use of these instructions
anyway.
Depends on D3690
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3692
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208542 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-IV that was available in MIPS32
A small number of instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now.
Depends on D3676
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208414 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-III that was available in MIPS32
A small number of instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now.
There's some obvious InstAlias's that ought to be marked MIPS-III but arent.
This is because they are not currently tested. I intend to catch these with
a final pass through the tablegen records to find tablegen records without
ISA annotations.
Depends on D3674
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3675
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208408 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I've noticed a bug in my test generator script that caused 64-bit objects
to be disassembled as if it were using the O32 ABI, giving the wrong register
names. As a result, it generated assembly files that are rejected by GAS when
assembling for the correct ABI. This was caused by the generator setting the
ELF e_flags incorrectly before disassembling the object.
This patch corrects the invalid tests that have already been committed by
replacing the ABI-dependent register names with numeric registers. In addition
to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed
to produce the invalid-*.s tests which test that instructions defined in later ISA's
are not accepted.
Depends on D3648
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208327 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These instructions were added in MIPS-I, and MIPS-II but were removed in
MIPS-III. Interestingly, GAS continues to accept them when assembling for
MIPS-III.
For the moment, these instructions will follow GAS and accept them for
MIPS-III and newer but this will be tightened up when the invalid-*.s
tests are added.
Depends on D3647
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3648
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208311 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
A small number of instructions are rejected with the wrong error message.
These have been placed in a separate test for now. There seems to be some
parsing quirk that triggers when these instructions are disabled.
Depends on D3571
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3647
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208305 91177308-0d34-0410-b5e6-96231b3b80d8
This adds FK_SecRel_2 relocation support to ARM. This enables the building of
object files for armv7-windows-msvc which enables CodeView line tables for
debugging as opposed to armv7-windows-itanium which currently uses DWARF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208273 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These processors will only be available for the integrated assembler at
first (CodeGen will emit a fatal error saying they are not implemented).
The intention is to work through the existing instructions and correctly
annotate the ISA they were added in so that we have a sufficiently good
base to start MIPS64r6 development. MIPS64r6 removes/re-encodes certain
instructions and I believe it is best to define ISA's using set-union's
as far as possible rather than using set-subtraction.
Reviewers: vmedic
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D3569
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208221 91177308-0d34-0410-b5e6-96231b3b80d8
Obviously we can't expect the two backends to produce identical diagnostics,
since what's possible depends quite a bit on how the .td files are structured.
I think the ARM64 diagnostics are basically of the same quality in all the
changed cases, so I've split the CHECK lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208084 91177308-0d34-0410-b5e6-96231b3b80d8
Add handling for FK_SecRel_4 (4-byte section relative relocations). These are
used by the generation of DWARF debug information (the abbrevations use section
relative relocations). This will also be used in generation of CodeView line
tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207941 91177308-0d34-0410-b5e6-96231b3b80d8
The fix itself is fairly simple: move getAccessVariant to MCValue so that we
replace the old weak expression evaluation with the far more general
EvaluateAsRelocatable.
This then requires that EvaluateAsRelocatable stop when it finds a non
trivial reference kind. And that in turn requires the ELF writer to look
harder for weak references.
Last but not least, this found a case where we were being bug by bug
compatible with gas and accepting an invalid input. I reported pr19647
to track it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207920 91177308-0d34-0410-b5e6-96231b3b80d8
.file records are supposed to have a section identifier of 65534
(IMAGE_SCN_DEBUG) rather than 0. This is spelt out clearly within the PE/COFF
specification. Fix this minor oversight with the implementation for support for
.file records.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207851 91177308-0d34-0410-b5e6-96231b3b80d8
This matches gas' behaviour on COFF.
I think that this yak is now sufficiently shaved for aliases with offset
to work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207786 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes pr19147.
There are a few more related issues to fix, but the testcase in the bug now
passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207763 91177308-0d34-0410-b5e6-96231b3b80d8
We currently force symbols to be globals in .thumb_set. The intent
seems to be that given
.thumb_set foo, bar
we emit an undefined symbol to bar if it is never defined. The side
effect is that we mark bar as global, even if it is defined, which gas
does not.
Producing an undefined reference to bar is a general difference from MC and gas.
For example, given
a = b
gas will produce an undefined reference to b, MC will not. I would be surprised
if any code depends on this, but it it does, we should fix the general
difference, not special case .thumb_set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207757 91177308-0d34-0410-b5e6-96231b3b80d8
The canonical form of the BFM instruction is always one of the more explicit
extract or insert operations, which makes reading output much easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207752 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are two functional changes:
1) The directive is not expanded for the ASM->ASM code path.
2) If PIC is not set, there's no expansion for the ASM->OBJ code path (same behaviour as GAS).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207741 91177308-0d34-0410-b5e6-96231b3b80d8
GAS doesn't actually accept these particular cases.
The mnemonic without the trailing 'v' still supports two-operand aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207740 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the coff writer compute the correct symbol value for the test in
pr19147. The section is still incorrect, that will be fixed in a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207728 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The pattern sltu $r1, $r2, $imm is found in handwritten assembly which
is just a shorthand version of sltui $r1, $r2, $imm.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3508
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207671 91177308-0d34-0410-b5e6-96231b3b80d8
We already do this for shstrtab, so might as well do it for strtab. This
extracts the string table building code into a separate class. The idea
is to use it for other object formats too.
I mostly wanted to do this for the general principle, but it does save a
little bit on object file size. I tried this on a clang bootstrap and
saved 0.54% on the sum of object file sizes (1.14 MB out of 212 MB for
a release build).
Differential Revision: http://reviews.llvm.org/D3533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207670 91177308-0d34-0410-b5e6-96231b3b80d8
It's been decided that in the future, the floating-point immediate in
instructions like "fcmeq v0.2s, v1.2s, #0.0" will be canonically "0.0", which
has been implemented on AArch64 already but not ARM64.
This fixes that issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207666 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The pattern dsll/dsrl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of dsllv/dsrlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207664 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The pattern sll/srl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of sllv/srlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3483
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207657 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also renamed non-portable register names (e.g. $t2) so that we don't end up
with a different encoding for what appears to be an equivalent instruction.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207655 91177308-0d34-0410-b5e6-96231b3b80d8
The canonical syntax for shifts by a variable amount does not end with 'v', but
that syntax should be supported as an alias (presumably for legacy reasons).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207649 91177308-0d34-0410-b5e6-96231b3b80d8
On instructions using the NZCV register, a couple of conditions have dual
representations: HS/CS and LO/CC (meaning unsigned-higher-or-same/carry-set and
unsigned-lower/carry-clear). The first of these is more descriptive in most
circumstances, so we should print it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207644 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is used for setting up $gp in the beginning of a function.
It expands to three instructions if PIC is enabled:
lui $gp, %hi(_gp_disp)
addui $gp, $gp, %lo(_gp_disp)
addu $gp, $gp, $reg
_gp_disp is a special symbol that the linker sets to the distance between
the lui instruction and the context pointer (_gp).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207637 91177308-0d34-0410-b5e6-96231b3b80d8
Since these are mostly used in "lsl #16", "lsl #32", "lsl #48" combinations to
piece together an immediate in 16-bit chunks, hex is probably the most
appropriate format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207635 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly aimed at the NEON logical operations and MOVI/MVNI (since they
accept weird shifts which are more naturally understandable in hex notation).
Also changes BRK/HINT etc, which is probably a neutral change, but easier than
the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207634 91177308-0d34-0410-b5e6-96231b3b80d8
Since these instructions only accept a 12-bit immediate, possibly shifted left
by 12, the canonical syntax used by the architecture reference manual is "#N {,
lsl #12 }". We should accept an immediate that has already been shifted, (e.g.
Also, print a comment giving the full addend since it can be helpful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207633 91177308-0d34-0410-b5e6-96231b3b80d8
Emit the COFF header when printing out the function. This is important as the
header contains two important pieces of information: the storage class for the
symbol and the symbol type information. This bit of information is required for
the linker to correctly identify the type of symbol that it is dealing with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207613 91177308-0d34-0410-b5e6-96231b3b80d8
This patch centralizes the handling of the thumb bit around
MCStreamer::isThumbFunc and makes isThumbFunc handle aliases.
This fixes a corner case, but the main advantage is having just one
way to check if a MCSymbol is thumb or not. This should still be
refactored to be ARM only, but at least now it is just one predicate
that has to be refactored instead of 3 (isThumbFunc,
ELF_Other_ThumbFunc, and SF_ThumbFunc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207522 91177308-0d34-0410-b5e6-96231b3b80d8
When evaluating an assembly expression for a relocation, we want to
stop at MCSymbols that are in the symbol table, even if they are variables.
This is needed since the semantics may require that the relocation use them.
That is not the case when computing the value of a symbol in the symbol table.
There are no relocations in this case and we have to keep going until we hit
a section or find out that the expression doesn't have an assembly time
value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207445 91177308-0d34-0410-b5e6-96231b3b80d8
The symbol table itself has no relocations, so it is not possible to represent
things like
a = undefined + 1
With the patch we just omit these variables. That matches the behaviour of the
gnu assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207419 91177308-0d34-0410-b5e6-96231b3b80d8
Someone couldn't bear to have a completely orthogonal set of floating-point
registers, so we've got some instructions that only accept v0-v15 (coming in
ARMv9, V128_prime: you're allowed v2, v3, v5, v7, ...).
Anyway, we were permitting even the out of range registers during assembly
(CodeGen handled it correctly). This adds a diagnostic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207412 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce support for WoA PE/COFF object file emission from LLVM. Add the new
target specific PE/COFF Streamer (ARMWinCOFFStreamer) that handles the ARM
specific behaviour of PE/COFF object emission. ARM exception information is not
yet emitted and is a TODO item.
The ARM specific object writer (ARMWinCOFFObjectWriter) handles the ARM specific
relocation handling in conjunction with the WinCOFFObjectWriter in the MC layer.
The MC layer needs to be updated to deal with the relocation adjustments.
Branch relocations are adjusted by 4 bytes (unlikely their ELF counterparts).
Minor tweaks to switch multiple conditional checks into equivalent switch
statements. The ObjectFileInfo is updated to relax the object file setup for
Windows COFF. Move the architecture checks into an assertion. Windows COFF is
currently only supported on x86, x86_64, and ARM (thumb). Rather than
defaulting to ELF, we will refuse to generate an object file. This is better
though as you do not get an (arbitrary) object file which is different from the
request.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207345 91177308-0d34-0410-b5e6-96231b3b80d8
This skips a couple of compare ones due to the different syntaxt for
floating-point 0.0. AArch64 does it more canonically, and we'll need to fiddle
ARM64 to make it work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207119 91177308-0d34-0410-b5e6-96231b3b80d8
This matches ARM64 behaviour, which I think is clearer. It also puts all the
churn from that difference into one easily ignored commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207116 91177308-0d34-0410-b5e6-96231b3b80d8
These can have different relocations in ELF. In particular both:
b.eq global
ldr x0, global
are valid, giving different relocations. The only possible way to distinguish
them is via a different fixup, so the operands had to be separated throughout
the backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207105 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for bytes replication feature, so it could be GAS compatible.
E.g. instructions below:
"vmov.i32 d0, 0xffffffff"
"vmvn.i32 d0, 0xabababab"
"vmov.i32 d0, 0xabababab"
"vmov.i16 d0, 0xabab"
are incorrect, but we could deal with such cases.
For first one we should emit:
"vmov.i8 d0, 0xff"
For second one ("vmvn"):
"vmov.i8 d0, 0x54"
For last two instructions it should emit:
"vmov.i8 d0, 0xab"
P.S.: In ARMAsmParser.cpp I have also fixed few nearby style issues in old code.
Just for keeping method bodies in harmony with themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207080 91177308-0d34-0410-b5e6-96231b3b80d8
This is dependent on changes that are not fully ready to be merged yet (WoA
object file emission). The test can be re-enabled for that target later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207038 91177308-0d34-0410-b5e6-96231b3b80d8
The test was changed from aarch64 to arm64 but not moved. The test would fail
if the backend was not built.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207029 91177308-0d34-0410-b5e6-96231b3b80d8
Emit the flag to indicate to the assembler that a section contains data if there
is pre-populated data present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207028 91177308-0d34-0410-b5e6-96231b3b80d8
AArch64 has feature predicates for NEON, FP and CRYPTO instructions.
This allows the compiler to generate code without using FP, NEON
or CRYPTO instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206949 91177308-0d34-0410-b5e6-96231b3b80d8
diagnostic that includes location information.
Currently if one has this assembly:
.quad (0x1234 + (4 * SOME_VALUE))
where SOME_VALUE is undefined ones gets the less than
useful error message with no location information:
% clang -c x.s
clang -cc1as: fatal error: error in backend: expected relocatable expression
With this fix one now gets a more useful error message
with location information:
% clang -c x.s
x.s:5:8: error: expected relocatable expression
.quad (0x1234 + (4 * SOME_VALUE))
^
To do this I plumbed the SMLoc through the MCObjectStreamer
EmitValue() and EmitValueImpl() interfaces so it could be used
when creating the MCFixup.
rdar://12391022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206906 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure only general purpose registers are valid for offset regs and
that 32-bit regs are only valid for sxtw and uxtw extends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206799 91177308-0d34-0410-b5e6-96231b3b80d8
With this MC is able to handle _GLOBAL_OFFSET_TABLE_ in 64 bit mode, which is
needed for medium and large code models.
This fixes pr19470.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206793 91177308-0d34-0410-b5e6-96231b3b80d8
expressions for mov instructions instead of silently truncating by default.
For the ARM assembler, we want to avoid misleadingly allowing something
like "mov r0, <symbol>" especially when we turn it into a movw and the
expression <symbol> does not have a :lower16: or :upper16" as part of the
expression. We don't want the behavior of silently truncating, which can be
unexpected and lead to bugs that are difficult to find since this is an easy
mistake to make.
This does change the previous behavior of llvm but actually matches an
older gnu assembler that would not allow this but print less useful errors
of like “invalid constant (0x927c0) after fixup” and “unsupported relocation on
symbol foo”. The error for llvm is "immediate expression for mov requires
:lower16: or :upper16" with correct location information on the operand
as shown in the added test cases.
rdar://12342160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206669 91177308-0d34-0410-b5e6-96231b3b80d8
Both ZLIB and the debug info compressed section header ("ZLIB" + the
size of the uncompressed data) take some constant overhead so in some
cases the compressed data is actually larger than the uncompressed data.
In these cases, just don't compress or rename the section at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206659 91177308-0d34-0410-b5e6-96231b3b80d8
While unnamed relocations are already cached in side tables in
ELFObjectWriter::RecordRelocation, symbols still need their fragments
updated to refer to the newly compressed fragment (even if that fragment
isn't big enough to fit the offset). Even though we only create
temporary symbols in debug info sections this comes up in 32 bit builds
where even temporary symbols in mergeable sections (such as debug_str)
have to be emitted as named symbols.
I tried a few other ways to do this but they all didn't work for various
reasons:
1) Canonicalize the MCSymbolData in RecordRelocation, nulling out the
Fragment (so it didn't have to be updated by CompressDebugSection). This
doesn't work because some code relies on symbols having fragments to
indicate that they're defined, I think.
2) Canonicalize the MCSymbolData in RecordRelocation to be "first
fragment + absolute offset" so it would be cheaper to just test and
update the fragment in CompressDebugSections. This doesn't work because
the offset computed in RecordRelocation isn't that of the symbol's
fragment, it's the passed in fragment (I haven't figured out what that
fragment is - perhaps it's the location where the relocation is to be
written). And if the fragment offset has to be computed only for this
use we might as well just do it when we need to, in
CompressDebugSection.
I also added an assert to help catch this a bit more clearly, even
though it is UB. The test case improvements would either assert fail
and/or valgrind vail without the fix, even if they wouldn't necessarily
fail the FileCheck output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206653 91177308-0d34-0410-b5e6-96231b3b80d8
This commit was attributed to a different person from the person who
posted the patch to the list, and the person who posted it the list
claimed when they did that they were not the author, but that the author
was yet a third person. I don't know what is going on here, but
reverting until the attribution is clear and the author has explicitly
contributed the patch.
Also, the review hasn't really involved any of the MC maintainers and
that seems questionable too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206576 91177308-0d34-0410-b5e6-96231b3b80d8
Update the SXT[BHW]/UXTW instruction aliases and the shifted reg addressing
mode handling.
PR19455 and rdar://16650642
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206495 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand
matcher for our shift_rotate_imm and shift_rotate_reg class of instructions.
The tests were also updated so that they include now encoding information
for all affected instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206398 91177308-0d34-0410-b5e6-96231b3b80d8
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
Adjust the tests to validate the number of auxiliary entries used to store the
filename.
Thanks to majnemer's sharp eye for catching the missing - 1 in the round up
calculation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206359 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for emitting .file records. This is mostly a quality of
implementation change (more complete support for COFF file emission) that was
noticed while working on COFF file emission for Windows on ARM.
A .file record is emitted as a symbol with storage class FILE (103) and the name
".file". A series of auxiliary format 4 records follow which contain the file
name. The filename is stored as an ANSI string and is padded with NULL if the
length is not a multiple of COFF::SymbolSize (18).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206355 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes we need emit the bits that would actually be a MOVN when producing a
relocated MOVZ instruction (don't ask). But not always, a check which ARM64 got
wrong until now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206289 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we bind those directives with the last symbol, so if none
has been defined, this would lead to a crash of the compiler.
<rdar://problem/15939159>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206236 91177308-0d34-0410-b5e6-96231b3b80d8
This allows correct relocations to be generated for a symbolic
address that is being adjusted by a negative constant. Since r204294,
such expressions have triggered undefined behavior when LLVM was built
without assertions.
Credit goes to Rafael for this patch; I'm submitting it on his behalf
as he is on vacation this week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206192 91177308-0d34-0410-b5e6-96231b3b80d8
This was most likely caused by an uninitialized value and the relevant code was re-written in r205292. Reverting to see if it still fails on any of the buildbots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206033 91177308-0d34-0410-b5e6-96231b3b80d8
To support compressing the debug_line section that contains multiple
fragments (due, I believe, to variation in choices of line table
encoding depending on the size of instruction ranges in the actual
program code) we needed to support compressing multiple MCFragments in a
single pass.
This patch implements that behavior by mutating the post-relaxed and
relocated section to be the compressed form of its former self,
including renaming the section.
This is a more flexible (and less invasive, to a degree) implementation
that will allow for other features such as "use compression only if it's
smaller than the uncompressed data".
Compressing debug_frame would be a possible further extension to this
work, but I've left it for now. The hurdle there is alignment sections -
which might require going as far as to refactor
MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an
MCObjectWriter (there's already a virtual call there, so it shouldn't
add substantial compile-time cost) which could in turn involve
refactoring MCAsmBackend::writeNopData to use that same abstraction...
which involves touching all the backends. This would remove the limited
handling of fragment writing seen in
ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's
more invasive.
I did discover that I (perhaps obviously) don't need to handle
relocations when I rewrite the fragments - since the relocations have
already been applied and computed (and stored into
ELFObjectWriter::Relocations) by this stage (necessarily, because we
need to have written any immediate values or assembly-time relocations
into the data already before we compress it, which we have). The test
case doesn't necessarily cover that in detail - I can add more test
coverage if that's preferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205990 91177308-0d34-0410-b5e6-96231b3b80d8
To support compression for debug_line and debug_frame a different
approach is required. To simplify review, revert the old implementation
and XFAIL the test case. New implementation to follow shortly.
Reverts r205059 and r204958.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205989 91177308-0d34-0410-b5e6-96231b3b80d8
alignments on vld/vst instructions. And report errors for
alignments that are not supported.
While this is a large diff and an big test case, the changes
are very straight forward. But pretty much had to touch
all vld/vst instructions changing the addrmode to one of the
new ones that where added will do the proper checking for
the specific instruction.
FYI, re-committing this with a tweak so MemoryOp's default
constructor is trivial and will work with MSVC 2012. Thanks
to Reid Kleckner and Jim Grosbach for help with the tweak.
rdar://11312406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205986 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It is now the smallest superset for these ISA's.
FeatureMips4 now contains FeatureFPIdx since [ls][dw]xc1 were added in MIPS-IV.
Made the FPIdx feature bit lowercase so that it can be used in the -mattr option.
Depends on D3274
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205964 91177308-0d34-0410-b5e6-96231b3b80d8
It doesn't build with MSVC 2012, because MSVC doesn't allow union
members that have non-trivial default constructors. This change added
'SMLoc AlignmentLoc' to MemoryOp, which made MemoryOp's default ctor
non-trivial.
This reverts commit r205930.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205944 91177308-0d34-0410-b5e6-96231b3b80d8
alignments on vld/vst instructions. And report errors for
alignments that are not supported.
While this is a large diff and an big test case, the changes
are very straight forward. But pretty much had to touch
all vld/vst instructions changing the addrmode to one of the
new ones that where added will do the proper checking for
the specific instruction.
rdar://11312406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Local common symbols were properly inserted into the .bss section.
However, putting external common symbols in the .bss section would give
them a strong definition.
Instead, encode them as undefined, external symbols who's symbol value
is equivalent to their size.
Reviewers: Bigcheese, rafael, rnk
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3324
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205811 91177308-0d34-0410-b5e6-96231b3b80d8
This consolidates the duplicated MachO checks in the directive parsing for
various directives that are unsupported for Mach-O. The error message change is
unimportant as this restores the behaviour to that prior to the addition of the
new directive handling. Furthermore, use a more direct check for MachO
targeting rather than an indirect feature check of the assembler.
Also simplify the test execution command to avoid temporary files. Further more,
perform the check in both object and assembly emission.
Whether all non-applicable directives are handled is another question. .fnstart
is marked as being unsupported, however, the complementary .fnend is not. The
additional unwinding directives are also still honoured. This change does not
change that, though, it would be good to validate and mark them as being
unsupported if they are unsupported for the MachO emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205678 91177308-0d34-0410-b5e6-96231b3b80d8
Removed "GNU Assembler extension (compatibility)" definitions from ARMInstrInfo.td
Fixed ARMAsmParser::ParseInstruction GNU compatability branch, so it also works for thumb mode from now.
Added new tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205622 91177308-0d34-0410-b5e6-96231b3b80d8
More updating of tests to be explicit about the target triple rather than
relying on the default target triple supporting ARM mode.
Indicate to lit that object emission is not yet available for Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205545 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the tests that were targeting ARM EABI to explicitly specify the
environment rather than relying on the default. This breaks with the new
Windows on ARM support when running the tests on Windows where the default
environment is no longer EABI.
Take the opportunity to avoid a pointless redirect (helps when trying to debug
with providing a command line invocation which can be copy and pasted) and
removing a few greps in favour of FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205541 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
test/MC/Mips/<isa1>/invalid-<isa2>.s
Test that <isa1> does not support <isa2>'s instructions.
test/MC/Mips/<isa1>/invalid-<isa2>-xfail.s
Things that should be invalid but currently aren't. Will XPASS if any
become invalid.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205538 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds the 'mips4' processor and a simple test of the ELF e_flags.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
I made one small change to the testcase so that it uses
mips64-unknown-linux instead of mips4-unknown-linux.
This patch indirectly adds FeatureCondMov to FeatureMips64. This is ok
because it's supposed to be there anyway and it turns out that
FeatureCondMov is not a predicate of any instructions at the moment
(this is a bug that hasn't been noticed because there are no targets
without the conditional move instructions yet).
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3244
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205530 91177308-0d34-0410-b5e6-96231b3b80d8
The trouble as in ARMAsmParser, in ParseInstruction method. It assumes that ARM::R12 + 1 == ARM::SP.
It is wrong, since ARM::<Register> codes are generated by tablegen and actually could be any random numbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205524 91177308-0d34-0410-b5e6-96231b3b80d8
%highest(sym1 - sym2 + const) relocations. Remove "ABS_" from VK_Mips_HI
and VK_Mips_LO enums in MipsMCExpr, to be consistent with VK_Mips_HIGHER
and VK_Mips_HIGHEST.
This change also deletes test file test/MC/Mips/higher_highest.ll and moves
its CHECK's to the new test file test/MC/Mips/higher-highest-addressing.s.
The deleted file tests that R_MIPS_HIGHER and R_MIPS_HIGHEST relocations are
emitted in the .o file. Since it uses -force-mips-long-branch option, it was
created when MipsLongBranch's implementation was emitting R_MIPS_HIGHER and
R_MIPS_HIGHEST relocations in the .o file. It was disabled when MipsLongBranch
started to directly calculate offsets.
Differential Revision: http://llvm-reviews.chandlerc.com/D3230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205522 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the instructions ext/ext32/cins/cins32.
It also changes pop/dpop to accept the two operand version and
adds a simple pattern to generate baddu.
Tests for the two operand versions (including baddu/dmul/dpop/pop)
and the code generation pattern for baddu are included.
Reviewed by: Daniel.Sanders@imgtec.com
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205449 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This should fix the issues the D3222 caused in lld. Testcase is based on
the one that failed in the buildbot.
Depends on D3233
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205298 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205292 91177308-0d34-0410-b5e6-96231b3b80d8
This moves one case of raw text checking down into the MCStreamer
interfaces in the form of a virtual function, even if we ultimately end
up consolidating on the one-or-many line tables issue one day, this is
nicer in the interim. This just generally streamlines a bunch of use
cases into a common code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205287 91177308-0d34-0410-b5e6-96231b3b80d8
I don't think this is reachable by any frontend (why would you transform
asm to asm+debug info?) but it helps tidy up some of this code, avoid
the weird special case of "emit the first CU, store the label, then emit
the rest" in MCDwarfLineTable::Emit by instead having the
DWARF-for-assembly case use the same codepath as DwarfDebug.cpp, by
registering the label of the debug_line section, thus causing it to be
emitted. (with a special case in asm output to just emit the label since
asm output uses the .loc directives, etc, rather than the debug_loc
directly)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205286 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205229 91177308-0d34-0410-b5e6-96231b3b80d8
%got_hi, %got_lo, %call_hi, %call_lo, %higher, and %highest are now recognised
by MipsAsmParser::getVariantKind().
To prevent future issues with missing entries in this StringSwitch, I've added
an assertion to the default case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205200 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike my previous commit, don't try to remove the corresponding VK_Mips_GOT yet
even though it shares the same assembly text since that is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205196 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Where those ISA's are not currently supported, the test is run with the smallest
superset of that ISA.
Some instructions are valid but don't pass yet. These have been placed in the
valid-xfail.s's which will XPASS if _any_ instruction starts working.
The valid.s's do not verify the encoding yet. There are also no tests checking that instructions from neighbouring ISA's are not accepted.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3214
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205180 91177308-0d34-0410-b5e6-96231b3b80d8
When LLVM is not built with zlib, nocompression.s will test
for the error message. But this test case will cause breakage
because the exit code is non-zero. This commit fix this issue
by adding "not" to the command.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205102 91177308-0d34-0410-b5e6-96231b3b80d8
Issue subject: Crash using integrated assembler with immediate arithmetic
Fix description:
Expressions like 'cmp r0, #(l1 - l2) >> 3' could not be evaluated on asm parsing stage,
since it is impossible to resolve labels on this stage. In the end of stage we still have
expression (MCExpr).
Then, when we want to encode it, we expect it to be an immediate, but it still an expression.
Patch introduces a Fixup (MCFixup instance), that is processed after main encoding stage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205094 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205090 91177308-0d34-0410-b5e6-96231b3b80d8
I started trying to fix a small issue, but this code has seen a small fix too
many.
The old code was fairly convoluted. Some of the issues it had:
* It failed to check if a symbol difference was in the some section when
converting a relocation to pcrel.
* It failed to check if the relocation was already pcrel.
* The pcrel value computation was wrong in some cases (relocation-pc.s)
* It was missing quiet a few cases where it should not convert symbol
relocations to section relocations, leaving the backends to patch it up.
* It would not propagate the fact that it had changed a relocation to pcrel,
requiring a quiet nasty work around in ARM.
* It was missing comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205076 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out debug_frame does use multiple fragments, so it doesn't
compress correctly with the current approach. Disable compressing it for
now while I figure out what's the best solution for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205059 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit of a stab in the dark, since I have zlib on my machine.
Just going to bounce it off the bots & see if it sticks.
Do we have some convention for negative REQUIRES: checks? Or do I just
need to add a feature like I've done here?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205050 91177308-0d34-0410-b5e6-96231b3b80d8
It was using "lc -filetype=obj" just to pass the result to
"llvm-objdupm -disassemble" and then filecheck assembly.
The CHECK-NOT would never match anyway since it was missing $.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205036 91177308-0d34-0410-b5e6-96231b3b80d8
1) When creating a .debug_* section and instead create a .zdebug_
section.
2) When creating a fragment in a .zdebug_* section, make it a compressed
fragment.
3) When computing the size of a compressed section, compress the data
and use the size of the compressed data.
4) Emit the compressed bytes.
Also, check that only if a section has a compressed fragment, then that
is the only fragment in the section.
Assert-fail if the fragment's data is modified after it is compressed.
Initial review on llvm-commits by Eric Christopher and Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204958 91177308-0d34-0410-b5e6-96231b3b80d8
Fix description:
Expressions like 'cmp r0, #(l1 - l2) >> 3' could not be evaluated on asm parsing stage,
since it is impossible to resolve labels on this stage. In the end of stage we still have
expression (MCExpr).
Then, when we want to encode it, we expect it to be an immediate, but it still an expression.
Patch introduces a Fixup (MCFixup instance), that is processed after main encoding stage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204899 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand matcher
for our ArithLogicR class of instructions (constituted by 3 register operands).
E.g.: and $1, $2 <=> and $1, $1, $2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204826 91177308-0d34-0410-b5e6-96231b3b80d8
The '.dword' directive accepts a list of expressions and emits
them in 8-byte chunks in successive locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204822 91177308-0d34-0410-b5e6-96231b3b80d8
The '.set mips64' directive enables the feature Mips:FeatureMips64
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204817 91177308-0d34-0410-b5e6-96231b3b80d8
The '.set mips64r2' directive enables the feature Mips:FeatureMips64r2
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64r2 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204815 91177308-0d34-0410-b5e6-96231b3b80d8
The directive '.option pic2' enables PIC from assembly source.
At the moment none of the macros/directives check the PIC bit
but that's going to be fixed relatively soon. For example, the
expansion of macros like 'la' depend on the relocation model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204803 91177308-0d34-0410-b5e6-96231b3b80d8
These are aliases of t4-t7 and are provided for compatibility with both the
original ABI documentation (using t4-t7) and GNU As (using t0-t3)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204797 91177308-0d34-0410-b5e6-96231b3b80d8
