nodes for vectors with an i16 element type. Add an optimization for
building a vector which is all zeros/undef except for the bottom
element, where the bottom element is an i8 or i16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72988 91177308-0d34-0410-b5e6-96231b3b80d8
integer type to be consistent with normal operation legalization. No visible
change because nothing is actually using this at the moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72980 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove NoImplicitFloat target option.
Update llc to set this attribute when -no-implicit-float command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72959 91177308-0d34-0410-b5e6-96231b3b80d8
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72957 91177308-0d34-0410-b5e6-96231b3b80d8
`-fomit-frame-pointer', we would lack the DW_CFA_advance_loc information for a
lot of function, and then they would be `0'. The linker (at least on Darwin)
needs to encode the stack size. In some cases, the stack size is too large to
directly encode. So the linker checks to see if there is a "subl $xxx,%esp"
instruction at the point where the `DW_CFA_def_cfa_offset' says the pc was. If
so, the compact encoding records the offset in the function to where the stack
size is embedded. But because the `DW_CFA_advance_loc' instructions are missing,
it looks before the function and dies.
So, instead of emitting the EH debug label before the stack adjustment
operations, emit it afterwards, right before the frame move stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72898 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72894 91177308-0d34-0410-b5e6-96231b3b80d8
using Promote which won't work because i64 isn't
a legal type. It's easy enough to use Custom, but
then we have the problem that when the type
legalizer is promoting FP_TO_UINT->i16, it has no
way of telling it should prefer FP_TO_SINT->i32
to FP_TO_UINT->i32. I have uncomfortably hacked
this by making the type legalizer choose FP_TO_SINT
when both are Custom.
This fixes several regressions in the testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72891 91177308-0d34-0410-b5e6-96231b3b80d8
instcombine doesn't know when it's safe. To partially compensate
for this, introduce new code to do this transformation in
dagcombine, which can use UnsafeFPMath.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72872 91177308-0d34-0410-b5e6-96231b3b80d8
carry GlobalBaseReg, and GlobalRetAddr too in Alpha's case. This
eliminates the need for them to search through the
MachineRegisterInfo livein list in order to identify these
virtual registers. EmitLiveInCopies is now the only user of the
virtual register portion of MachineRegisterInfo's livein data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72802 91177308-0d34-0410-b5e6-96231b3b80d8
with an accessor method which simply casts the parent class
SelectionDAGISel's TM to the target-specific type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72801 91177308-0d34-0410-b5e6-96231b3b80d8
Expand it exactly like GlobalAddress.
Fix some more crashes (InsertBranch() not being implemented) for compiling hitec libs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72776 91177308-0d34-0410-b5e6-96231b3b80d8
EAX = ..., AX<imp-def>
...
= AX
This creates a double-def. Apparently this used to be necessary but is no longer needed.
Thanks to Anton for pointing this out. Anton, I cannot create a test case without your uncommitted ARM patches. Please check in a test case for me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72755 91177308-0d34-0410-b5e6-96231b3b80d8
one new .cpp file, in preparation for merging in the Direct Object Emission
changes we're working on. No functional changes.
Fixed coding style issues on the original patch. Patch by Aaron Gray
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72754 91177308-0d34-0410-b5e6-96231b3b80d8
relocation model on x86-64. Higher level logic should override
the relocation model to PIC on x86_64-apple-darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72746 91177308-0d34-0410-b5e6-96231b3b80d8
TargetData pointer. The only thing it's used for are
calls to ConstantFoldCompareInstOperands and
ConstantFoldInstOperands, which both already accept a
null TargetData pointer. This makes
ConstantFoldConstantExpression easier to use in clients
where TargetData is optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72741 91177308-0d34-0410-b5e6-96231b3b80d8
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
RewriteStoreUserOfWholeAlloca deal with tail padding because
isSafeUseOfBitCastedAllocation expects them to. Otherwise, we crash
trying to erase the bitcast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72688 91177308-0d34-0410-b5e6-96231b3b80d8
decoding. Essentially, they both map to the same column in the "opcode
extensions for one- and two-byte opcodes" table in the x86 manual. The RawFrm
complicates decoding this.
Instead, use opcode 0x01, prefix 0x01, and form MRM1r. Then have the code
emitter special case these, a la [SML]FENCE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72556 91177308-0d34-0410-b5e6-96231b3b80d8
failure during llvm-gcc bootstrap:
Assertion failed: (!Tmp2.getNode() && "Can't legalize BR_CC with legal condition!"), function ExpandNode, file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/CodeGen/SelectionDAG/LegalizeDAG.cpp, line 2923.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/gcc/libgcc2.c:1727: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72530 91177308-0d34-0410-b5e6-96231b3b80d8
This is basically the end of this series of patches for LegalizeDAG; the
remaining special cases can't be removed without more infrastructure
work. There's a FIXME for each relevant opcode near the beginning of
SelectionDAGLegalize::LegalizeOp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72514 91177308-0d34-0410-b5e6-96231b3b80d8
list in Attributes.h. It also reorders the CPPBackend list to match so that
it's easier to see that it's complete.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72510 91177308-0d34-0410-b5e6-96231b3b80d8
the Intel manual (screenshot) says it should be 0b11110110 (f6). The existing
encoding causes a disassembly conflict with MMX_PAVGBrm, which really should be
0f e0."
Patch by Sean Callanan!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72508 91177308-0d34-0410-b5e6-96231b3b80d8
e.g.
orl $65536, 8(%rax)
=>
orb $1, 10(%rax)
Since narrowing is not always a win, e.g. i32 -> i16 is a loss on x86, dag combiner consults with the target before performing the optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72507 91177308-0d34-0410-b5e6-96231b3b80d8
rewrite the comparison if there is any implicit extension or truncation
on the induction variable. I'm planning for IVUsers to eventually take
over some of the work of this code, and for it to be generalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72496 91177308-0d34-0410-b5e6-96231b3b80d8
possible. For example, it now emits
%p.2.ip.1 = getelementptr [3 x [3 x double]]* %p, i64 2, i64 %tmp, i64 1
instead of the equivalent but less obvious
%p.2.ip.1 = getelementptr [3 x [3 x double]]* %p, i64 0, i64 %tmp, i64 19
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72452 91177308-0d34-0410-b5e6-96231b3b80d8
beyond their associated static array type.
I believe that this fixes a legitimate bug, because BasicAliasAnalysis
already has code to check for this condition that works for non-constant
indices, however it was missing the case of constant indices. With this
change, it checks for both.
This fixes PR4267, and miscompiles of SPEC 188.ammp and 464.h264.href.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72451 91177308-0d34-0410-b5e6-96231b3b80d8
FP_TO_XINT. Necessary for some cleanups I'm working on. Updated
from the previous version (r72431) to fix a bug and make some things a
bit clearer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72445 91177308-0d34-0410-b5e6-96231b3b80d8
- added processors k8-sse3, opteron-sse3, athlon64-sse3, amdfam10, and
barcelona with appropriate sse3/4a levels
- added FeatureSSE4A for amdfam10 processors
in X86Subtarget:
- added hasSSE4A
- updated AutoDetectSubtargetFeatures to detect SSE4A
- updated GetCurrentX86CPU to detect family 15 with sse3 as k8-sse3 and
family 10h as amdfam10
New processor names match those used by gcc.
Patch by Paul Redmond!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72434 91177308-0d34-0410-b5e6-96231b3b80d8
entries as there are basic blocks in the function. LiveVariables::getVarInfo
creates a VarInfo struct for every register in the function, leading to
quadratic space use. This patch changes the BitVector to a SparseBitVector,
which doesn't help the worst-case memory use but does reduce the actual use in
very long functions with short-lived variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72426 91177308-0d34-0410-b5e6-96231b3b80d8
that of the LHS. It doesn't matter for correctness, but the LHS
is more likely than the RHS to be a pointer type in exotic cases,
and it's more tidy to have it return the integer type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72424 91177308-0d34-0410-b5e6-96231b3b80d8
division operation, don't attempt to use the operation's value as
the base of a getelementptr. This fixes PR4271.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72422 91177308-0d34-0410-b5e6-96231b3b80d8
low-level alias() method, allowing it to reason more aggressively
about pointers into constant memory. PR4189
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72403 91177308-0d34-0410-b5e6-96231b3b80d8
in the case where a loop exit value cannot be computed, instead of only in
some cases while using SCEVCouldNotCompute in others. This simplifies
getSCEVAtScope's callers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72375 91177308-0d34-0410-b5e6-96231b3b80d8
one of the RecursivelyDeleteTriviallyDeadInstructions.
Add a comment explaining why the cache needs to be cleared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72372 91177308-0d34-0410-b5e6-96231b3b80d8
leave the original comparison in place if it has other uses, since the
other uses won't be dominated by the new comparison instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72369 91177308-0d34-0410-b5e6-96231b3b80d8
sending SCEVUnknowns to expandAddToGEP. This avoids the need for
expandAddToGEP to bend the rules and peek into SCEVUnknown
expressions.
Factor out the code for testing whether a SCEV can be factored by
a constant for use in a GEP index. This allows it to handle
SCEVAddRecExprs, by recursing.
As a result, SCEVExpander can now put more things in GEP indices,
so it emits fewer explicit mul instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72366 91177308-0d34-0410-b5e6-96231b3b80d8
Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72364 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't split legal vector operands. This is necessary because the
type legalization (and therefore, vector splitting) code will be going
away soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72349 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombiner created a negative shiftamount, stored in an
unsigned variable. Later the optimizer eliminated the shift entirely as being
undefined.
Example: (srl (shl X, 56) 48). ShiftAmt is 4294967288.
Fix it by checking that the shiftamount is positive, and storing in a signed
variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72331 91177308-0d34-0410-b5e6-96231b3b80d8
and it wasn't generating calls through @PLT for these functions.
hasLocalLinkage() is now false for available_externally,
I attempted to fix the inliner and dce to handle available_externally properly.
It passed make check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72328 91177308-0d34-0410-b5e6-96231b3b80d8
will allow simplifying LegalizeDAG to eliminate type legalization. (I
have a patch to do that, but it's not quite finished; I'll commit it
once it's finished and I've fixed any review comments for this patch.)
See the comment at the beginning of
lib/CodeGen/SelectionDAG/LegalizeVectorOps.cpp for more details on the
motivation for this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72325 91177308-0d34-0410-b5e6-96231b3b80d8
systems instead of attempting to promote them to a 64-bit SINT_TO_FP or
FP_TO_SINT. This is in preparation for removing the type legalization
code from LegalizeDAG: once type legalization is gone from LegalizeDAG,
it won't be able to handle the i64 operand/result correctly.
This isn't quite ideal, but I don't think any other operation for any
target ends up in this situation, so treating this case specially seems
reasonable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72324 91177308-0d34-0410-b5e6-96231b3b80d8
code in preparation for code generation. The main thing it does
is handle the case when eh.exception calls (and, in a future
patch, eh.selector calls) are far away from landing pads. Right
now in practice you only find eh.exception calls close to landing
pads: either in a landing pad (the common case) or in a landing
pad successor, due to loop passes shifting them about. However
future exception handling improvements will result in calls far
from landing pads:
(1) Inlining of rewinds. Consider the following case:
In function @f:
...
invoke @g to label %normal unwind label %unwinds
...
unwinds:
%ex = call i8* @llvm.eh.exception()
...
In function @g:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
"rethrow exception"
Now inline @g into @f. Currently this is turned into:
In function @f:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
invoke "rethrow exception" to label %normal unwind label %unwinds
unwinds:
%ex = call i8* @llvm.eh.exception()
...
However we would like to simplify invoke of "rethrow exception" into
a branch to the %unwinds label. Then %unwinds is no longer a landing
pad, and the eh.exception call there is then far away from any landing
pads.
(2) Using the unwind instruction for cleanups.
It would be nice to have codegen handle the following case:
invoke @something to label %continue unwind label %run_cleanups
...
handler:
... perform cleanups ...
unwind
This requires turning "unwind" into a library call, which
necessarily takes a pointer to the exception as an argument
(this patch also does this unwind lowering). But that means
you are using eh.exception again far from a landing pad.
(3) Bugpoint simplifications. When bugpoint is simplifying
exception handling code it often generates eh.exception calls
far from a landing pad, which then causes codegen to assert.
Bugpoint then latches on to this assertion and loses sight
of the original problem.
Note that it is currently rare for this pass to actually do
anything. And in fact it normally shouldn't do anything at
all given the code coming out of llvm-gcc! But it does fire
a few times in the testsuite. As far as I can see this is
almost always due to the LoopStrengthReduce codegen pass
introducing pointless loop preheader blocks which are landing
pads and only contain a branch to another block. This other
block contains an eh.exception call. So probably by tweaking
LoopStrengthReduce a bit this can be avoided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72276 91177308-0d34-0410-b5e6-96231b3b80d8
assuming that the use of the value is in a block dominated by the
"normal" destination. LangRef.html and other documentation sources
don't explicitly guarantee this, but it seems to be assumed in
other places in LLVM at least.
This fixes an assertion failure on the included testcase, which
is derived from the Ada testsuite.
FixUsesBeforeDefs is a temporary measure which I'm looking to
replace with a more capable solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72266 91177308-0d34-0410-b5e6-96231b3b80d8
use in expanding SCEVAddExprs with GEPs. The operands of a
SCEVMulExpr need to be multiplied together, not added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72250 91177308-0d34-0410-b5e6-96231b3b80d8
This only rejects mismatches between target specific calling convention
and C/LLVM specific calling convention.
There are too many fastcc/C, coldcc/cc42 mismatches in the testsuite, these are
not reject by the verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72248 91177308-0d34-0410-b5e6-96231b3b80d8
type as a target independent constant expression. I confess
that I didn't check that this method works as intended (though
I did test the equivalent hand-written IR a little). But what
could possibly go wrong!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72213 91177308-0d34-0410-b5e6-96231b3b80d8
Instcombine to be more aggressive about using SimplifyDemandedBits
on shift nodes. This allows a shift to be simplified to zero in the
included test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72204 91177308-0d34-0410-b5e6-96231b3b80d8
the 'constract function dbg thingy'. Rename some methods to make them consistent
with the rest of the methods. Move the 'Emit' methods to the end of the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72192 91177308-0d34-0410-b5e6-96231b3b80d8
build an integer and cast that to a float. This fixes a crash
caused by trying to split an f32 into two f16's.
This changes the behavior in test/CodeGen/XCore/fneg.ll because that
testcase now triggers a DAGCombine which converts the fneg into an integer
operation. If someone is interested, it's probably possible to tweak
the test to generate an actual fneg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72162 91177308-0d34-0410-b5e6-96231b3b80d8
of the comparison is defined inside the loop. This fixes a
use-before-def problem, because the transformation puts a use
of the RHS outside the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72149 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
function, this could be many, many times. We don't want to re-add variables to
that DIE for each time. We just want to add them once. Check to make sure that
we haven't added them already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72047 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a new class (MachineCodeInfo) that the JIT can fill in with details. Right now, just the address and the size of the machine code are reported.
Patch by Evan Phoenix!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72040 91177308-0d34-0410-b5e6-96231b3b80d8
to run last because it needs to know the exact size and position of every
basic block. Currently CodePlacementOpt is set up to run last. It might be
worthwhile to investigate reordering these passes, but for now, let's just
make it work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72037 91177308-0d34-0410-b5e6-96231b3b80d8
