The .error directive is similar to .err in that it will halt assembly if it is
evaluated for assembly. However, it permits a user supplied message to be
rendered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201999 91177308-0d34-0410-b5e6-96231b3b80d8
The .ifeqs directive assembles the following code if the quoted string
parameters are equal. The strings must be quoted using double quotes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201998 91177308-0d34-0410-b5e6-96231b3b80d8
.align is handled specially on certain targets. .align without any parameters
on ARM indicates a default alignment (4). Handle the special case in the target
parser, but fall back to the generic parser for the normal version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201988 91177308-0d34-0410-b5e6-96231b3b80d8
The .ifne directive assembles the following section of code if the argument
expression is non-zero. Effectively, it is equivalent to if.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201986 91177308-0d34-0410-b5e6-96231b3b80d8
If the strings are not quoted, the first string stops at the first comma, and
the second string stops at the end of the line. Strings which contain
whitespace should be quoted. Unquoted space is to be discarded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201985 91177308-0d34-0410-b5e6-96231b3b80d8
The .err directive produces an error whenever it is assembled. This can be
useful for preventing assembly when an unexpected condition occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201984 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the .short and its alias .hword for adding literal values
into the object file. This is similar to the .word directive, however, rather
than inserting a value of 4 bytes, adds a 2-byte value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201968 91177308-0d34-0410-b5e6-96231b3b80d8
Offsets past the range of single-slash encoding are encoded as base64,
padded to 6 characters, and prefixed with two slashes. This encoding is
undocumented but used by MSVC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201940 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201792 91177308-0d34-0410-b5e6-96231b3b80d8
This enhances the macro parser to parse and handle parameter qualifications,
which is needed to support required formal parameters in macro definitions. A
required parameter may not be defaulted (though providing a default value is
accepted with a warning). This improves GAS compatibility.
Partially addresses PR9248.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201630 91177308-0d34-0410-b5e6-96231b3b80d8
ldrd r6, r7 [r2, #15]
simply gives an error and does not triggers an assertion.
As Jim points out, the diagnostic is really strange here,
but fixing that would be more complicated. The missing
comma results in the parser expecting a construct like r2[2],
which is the vector index thing the error message is talking
about. That's not what the user intended, though, and there's
nothing else in the instruction that looks at all like a vector.
Yet more fallout from not having a real parser here and trying
to do context-free generic matching for addressing modes.
rdar://15097243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201531 91177308-0d34-0410-b5e6-96231b3b80d8
Until this point only macro definition with named parameters were parsed but the
names were ignored. This adds support for using that information for named
parameter instantiation.
In order to support the full semantics of the keyword arguments, the arguments
are no longer lazily initialised since the keyword arguments can be specified
out of order and partially if they are defaulted. Prepopulate the arguments
with the default value for any defaulted parameters, and then parse the
specified arguments.
This simplies some of the handling of the arguments in the inner loop since
empty arguments simply increment the parameter index and move on.
Note that keyword and positional arguments cannot be mixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201499 91177308-0d34-0410-b5e6-96231b3b80d8
The Linux kernel defines empty macros for compatibility with ARM UAL syntax.
The comma after the name is optional, and if present can be safely lexed. This
improves compatibility with the GNU assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201474 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a partial implementation of the .arch_extension directive to the
integrated ARM assembler. There are a number of limitations to this
implementation arising from the target backend support rather than the
implementation itself. Namely, iWMMXT (v1 and v2), Maverick, and XScale support
is not present in the ARM backend. Currently, there is no check for A-class
only (needed for virt), and no ARMv6k detection (needed for os and sec). The
remainder of the extensions are fully supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201471 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds support for emitting DWARF path discriminator values in
the object streamer. It also changes the DWARF dumper to show
discriminator values in the line table output.
Reviewers: echristo
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2794
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201427 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There should be a space before each of these two keywords to avoid
generating invalid assembly files.
NOTE: I could not find an obvious maintainers in CODE_OWNERS.TXT, but
this seems related to debug info.
Reviewers: echristo
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2791
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201359 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a slightly overzealous destination register restriction for the
'without .w' alias. Add some explicit testcases.
rdar://16033140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201173 91177308-0d34-0410-b5e6-96231b3b80d8
Original commits messages:
Add MRMXr/MRMXm form to X86 for use by instructions which treat the 'reg' field of modrm byte as a don't care value. Will allow for simplification of disassembler code.
Simplify a bunch of code by removing the need for the x86 disassembler table builder to know about extended opcodes. The modrm forms are sufficient to convey the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201065 91177308-0d34-0410-b5e6-96231b3b80d8
This enables a slightly odd feature of gas. The macro is defined when
the outermost macro is instantiated.
PR18599
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201045 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the tests more readable by using the -arm-attributes decoding support
in llvm-readobj since that is now available. Change the invocation commands to
be similar to other test and use a more precise triple (the tests only require
ARM EABI support).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201029 91177308-0d34-0410-b5e6-96231b3b80d8
In Thumb1 mode, bl instruction might be selected for branches between
basic blocks in the function if the offset is greater than 2KB.
However, this might cause SEGV because the destination symbol
is not marked as thumb function and the execution mode will be reset
to ARM mode.
Since we are sure that these symbols are in the same data fragment, we
can simply resolve these local symbols, and don't emit any relocation
information for this bl instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200842 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minimal implementation which accepts only constants rather than
full expressions, but that should be perfectly sufficient for all known
users for now.
Patch from PaX Team <pageexec@freemail.hu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200614 91177308-0d34-0410-b5e6-96231b3b80d8
Per the GAS documentation, .fill should permit pattern widths that
aren't a power of two. While I was in the neighborhood, I added some
sanity checking. This change was motivated by a use of this construct
in the Linux Kernel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200606 91177308-0d34-0410-b5e6-96231b3b80d8
To remove this one simply move the end of file logic from the asm printer to
the target mc streamer.
This removes the last call to hasRawTextSupport from lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200590 91177308-0d34-0410-b5e6-96231b3b80d8
These should end up (in ELF) as R_X86_64_32S relocs, not R_X86_64_32.
Kill the horrid and incomplete special case and FIXME in
EncodeInstruction() and set things up so it can infer the signedness
from the ImmType just like it can the size and whether it's PC-relative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200495 91177308-0d34-0410-b5e6-96231b3b80d8
The .object_arch directive indicates an alternative architecture to be specified
in the object file. The directive does *not* effect the enabled feature bits
for the object file generation. This is particularly useful when the code
performs runtime detection and would like to indicate a lower architecture as
the requirements than the actual instructions used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200451 91177308-0d34-0410-b5e6-96231b3b80d8
.movsp is an ARM unwinding directive that indicates to the unwinder that a
register contains an offset from the current stack pointer. If the offset is
unspecified, it defaults to zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200449 91177308-0d34-0410-b5e6-96231b3b80d8
This enhances the ARMAsmParser to handle .tlsdescseq directives. This is a
slightly special relocation. We must be able to generate them, but not consume
them in assembly. The relocation is meant to assist the linker in generating a
TLS descriptor sequence. The ELF target streamer is enhanced to append
additional fixups into the current segment and that is used to emit the new
R_ARM_TLS_DESCSEQ relocations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200448 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for tlsdesc relocations which are part of the ABI, marked as
experimental. These relocations permit the linker to perform TLS reference
optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200447 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for TLS CALL relocations. TLS CALL relocations are used to
indicate to the linker to generate appropriate entries to resolve TLS references
via an appropriate function invocation (e.g. __tls_get_addr(PLT)).
In order to accomodate the linker relaxation of the TLS access model for the
references (GD/LD -> IE, IE -> LE), the relocation addend must be incomplete.
This requires that the partial inplace value is also incomplete (i.e. 0). We
simply avoid the offset value calculation at the time of the fixup adjustment in
the ARM assembler backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200446 91177308-0d34-0410-b5e6-96231b3b80d8
The linux kernel makes uses of a GAS `feature' which substitutes nothing
for macro arguments which aren't specified.
Proper support for these kind of macro arguments necessitated a cleanup of
differences between `GAS' and `Darwin' dialect macro processing.
Differential Revision: http://llvm-reviews.chandlerc.com/D2634
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200409 91177308-0d34-0410-b5e6-96231b3b80d8
After all hard work to implement the EHABI and with the test-suite
passing, it's time to turn it on by default and allow users to
disable it as a work-around while we fix the eventual bugs that show
up.
This commit also remove the -arm-enable-ehabi-descriptors, since we
want the tables to be printed every time the EHABI is turned on
for non-Darwin ARM targets.
Although MCJIT EHABI is not working yet (needs linking with the right
libraries), this commit also fixes some relocations on MCJIT regarding
the EH tables/lib calls, and update some tests to avoid using EH tables
when none are needed.
The EH tests in the test-suite that were previously disabled on ARM
now pass with these changes, so a follow-up commit on the test-suite
will re-enable them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200388 91177308-0d34-0410-b5e6-96231b3b80d8
This commit seeks to do two things:
- Run the surfeit of tests under the Darwin dialect. This ends up
affecting tests which assumed that spaces could deliminate arguments.
- The GAS dialect tests should limit their surface area to things that
could plausibly work under GAS. For example, Darwin style arguments
have no business being in such a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200383 91177308-0d34-0410-b5e6-96231b3b80d8
As opposed to GCC/GAS the default ABI for Mips64 is n64.
Compatibility bit should be set if o32 ABI is used when targeting Mips64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200332 91177308-0d34-0410-b5e6-96231b3b80d8
This brings MC into line with GNU 'as' on ARM, and it brings the ARM
target into line with most other LLVM targets, which declare the
initial CFI state with addInitialFrameState().
Without this, functions generated with .cfi_startproc/endproc on ARM
will tend to cause GDB to abort with:
gdb/dwarf2-frame.c:1132: internal-error: Unknown CFA rule.
I've also tested this by comparing the output of "readelf -w" on the
object files produced by llvm-mc and gas when given the .s file added
here.
This change is part of addressing PR18636.
Differential Revision: http://llvm-reviews.chandlerc.com/D2597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200255 91177308-0d34-0410-b5e6-96231b3b80d8
This commit allows LLVM MC to process .cfi_startproc directives when
they are followed by an additional `simple' identifier. This signals to
elide the emission of target specific CFI instructions that would
normally occur initially.
This fixes PR16587.
Differential Revision: http://llvm-reviews.chandlerc.com/D2624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200227 91177308-0d34-0410-b5e6-96231b3b80d8
Placed the MC variant diagnostics in the wrong directory accidentally. Move
them into their respective architecture specific directories.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200161 91177308-0d34-0410-b5e6-96231b3b80d8
If a complex expression was passed to the .word directive and the first part of
the directive failed to parse, a secondary diagnostic would be produced that
would clutter the error diagnostics. Improve the diagnostics by consuming the
remainder of the statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200160 91177308-0d34-0410-b5e6-96231b3b80d8
An emitted diagnostic for an invalid relocation variant would place the caret on
the token following the relocation variant indicator or at the end of the line
if there was no following token. This change corrects the placement of the
caret to point to the token.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200159 91177308-0d34-0410-b5e6-96231b3b80d8
These were:
* noreorder handling on the target object streamer and asm parser.
* setting the initial flag bits based on the enabled features.
* setting the elf header flag for micromips
It is *really* depressing I am the one doing this instead of someone at
mips actually taking the time to understand the infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200138 91177308-0d34-0410-b5e6-96231b3b80d8
r200064 depends on r200051.
r200051 is broken: I tries to replace .mips_hack_elf_flags, which is a good
thing, but what it replaces it with is even worse.
The new emitMipsELFFlags it adds corresponds to no assembly directive, is not
marked as a hack and is not even printed to the .s file.
The patch also introduces more uses of hasRawTextSupport.
The correct way to remove .mips_hack_elf_flags is to have the mips target
streamer handle the default flags (and command line options). That way the
same code path is used for asm and obj. The streamer interface should *really*
correspond to what is printed in the .s file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200078 91177308-0d34-0410-b5e6-96231b3b80d8
This patch uses a common MipsTargetSteamer interface for both
MipsAsmPrinter and MipsAsmParser for recording default and commandline
driven directives that affect ELF header flags.
It has been noted that the .ll tests affected by this patch belong in
test/Codegen/Mips. I will move them in a separate patch.
Also, a number of directives do not get expressed by AsmPrinter in the
resultant .s assembly such as setting the correct ASI. I have noted this
in the tests and they will be addressed in later patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200051 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
registers in memory addresses that do not match the index register. As it does
for .att_syntax.
rdar://15887380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199948 91177308-0d34-0410-b5e6-96231b3b80d8
scale factors in memory addresses. As it does for .att_syntax.
It was producing:
Assertion failed: (((Scale == 1 || Scale == 2 || Scale == 4 || Scale == 8)) && "Invalid scale!"), function CreateMem, file /Volumes/SandBox/llvm/lib/Target/X86/AsmParser/X86AsmParser.cpp, line 1133.
rdar://14967214
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199942 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates .set mips16 support which
affects the ELF ABI and its flags. In addition the patch uses
a common interface for both the MipsTargetSteamer and
MipsObjectStreamer that the assembler uses for
both ELF and ASCII output for these directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199851 91177308-0d34-0410-b5e6-96231b3b80d8
Add support to llvm-readobj to decode the actual opcodes. The ARM EHABI opcodes
are a variable length instruction set that describe the operations required for
properly unwinding stack frames.
The primary motivation for this change is to ease the creation of tests for the
ARM EHABI object emission as well as the unwinding directive handling in the ARM
IAS.
Thanks to Logan Chien for an extra test case!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199708 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the unwind_raw directive for the ARM IAS. The unwind_raw
directive takes the form of a stack offset value followed by one or more bytes
representing the opcodes to be emitted. The opcode emitted will interpreted as
if it were assembled by the opcode assembler via the standard unwinding
directives.
Thanks to Logan Chien for an extra test!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199707 91177308-0d34-0410-b5e6-96231b3b80d8
The .personalityindex directive is equivalent to the .personality directive with
the ARM EABI personality with the specific index (0, 1, 2). Both of these
directives indicate personality routines, so enhance the personality directive
handling to take into account personalityindex.
Bonus fix: flush the UnwindContext at the beginning of a new function.
Thanks to Logan Chien for additional tests!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199706 91177308-0d34-0410-b5e6-96231b3b80d8
The addition of IC_OPSIZE_ADSIZE in r198759 wasn't quite complete. It
also turns out to have been unnecessary. The disassembler handles the
AdSize prefix for itself, and doesn't care about the difference between
(e.g.) MOV8ao8 and MOB8ao8_16 definitions. So just let them coexist and
don't worry about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199654 91177308-0d34-0410-b5e6-96231b3b80d8
The disassembler has a special case for 'L' vs. 'W' in its heuristic for
checking for 32-bit and 16-bit equivalents. We could expand the heuristic,
but better just to be consistent in using the 'L' suffix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199652 91177308-0d34-0410-b5e6-96231b3b80d8
Not quite sure why this was marked isAsmParserOnly, but it means that the
disassembler can't see it either.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199651 91177308-0d34-0410-b5e6-96231b3b80d8
When disassembling in 16-bit mode the meaning of the OpSize bit is
inverted. Instructions found in the IC_OPSIZE context will actually
*not* have the 0x66 prefix, and instructions in the IC context will
have the 0x66 prefix. Make use of the existing special-case handling
for the 0x66 prefix being in the wrong place, to cope with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199650 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the symbol(tlsldo) relocation. This is required in order to
solve PR18554.
Reviewed by R. Golin, A. Korobeynikov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199644 91177308-0d34-0410-b5e6-96231b3b80d8
For FCMEQ, FCMGE, FCMGT, FCMLE and FCMLT, floating point zero will be
printed as #0.0 instead of #0. To support the history codes using #0,
we consider to let asm parser accept both #0.0 and #0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199621 91177308-0d34-0410-b5e6-96231b3b80d8
Ensure that the tag types are reflected on a replacement. This is particularly
important for the compatibility tag which has multiple representations where the
last definition wins.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199577 91177308-0d34-0410-b5e6-96231b3b80d8
Fix MLA defs to use register class GPRnopc.
Add encoding tests for multiply instructions.
(Alias for MUL/SMLAL/UMLAL added by r199026.)
Patch by Zhaoshi.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199491 91177308-0d34-0410-b5e6-96231b3b80d8
ARM assembly syntax uses @ for a comment, execpt for the second
parameter of the .symver directive which requires @ as part of the
symbol name. This commit fixes the parsing of this directive by
adding a special case for ARM for this one argumnet.
To make the change we had to move the AllowAtInIdentifier variable
to the MCAsmLexer interface (from AsmLexer) and expose a setter for
the value. The ELFAsmParser then toggles this value when parsing
the second argument to the .symver directive for a target that
uses @ as a comment symbol
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199339 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC on x64 requires that we create image relative symbol
references to refer to RTTI data. Seeing as how there is no way to
explicitly make reference to a given relocation type in LLVM IR, pattern
match expressions of the form &foo - &__ImageBase.
Differential Revision: http://llvm-reviews.chandlerc.com/D2523
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199312 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU as behavior is a bit different and very strange. It will mark any
label that contains an instruction. We can implement that, but using the
type looks more natural since gas will not mark a function if a .word is
used to output the instructions!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199287 91177308-0d34-0410-b5e6-96231b3b80d8
This finishes the job started in r198756, and creates separate opcodes for
64-bit vs. 32-bit versions of the rest of the RET instructions too.
LRETL/LRETQ are interesting... I can't see any justification for their
existence in the SDM. There should be no 'LRETL' in 64-bit mode, and no
need for a REX.W prefix for LRETQ. But this is what GAS does, and my
Sandybridge CPU and an Opteron 6376 concur when tested as follows:
asm __volatile__("pushq $0x1234\nmovq $0x33,%rax\nsalq $32,%rax\norq $1f,%rax\npushq %rax\nlretl $8\n1:");
asm __volatile__("pushq $1234\npushq $0x33\npushq $1f\nlretq $8\n1:");
asm __volatile__("pushq $0x33\npushq $1f\nlretq\n1:");
asm __volatile__("pushq $0x1234\npushq $0x33\npushq $1f\nlretq $8\n1:");
cf. PR8592 and commit r118903, which added LRETQ. I only added LRETIQ to
match it.
I don't quite understand how the Intel syntax parsing for ret
instructions is working, despite r154468 allegedly fixing it. Aren't the
explicitly sized 'retw', 'retd' and 'retq' supposed to work? I have at
least made the 'lretq' work with (and indeed *require*) the 'q'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199106 91177308-0d34-0410-b5e6-96231b3b80d8
The target specific parser should return `false' if the target AsmParser handles
the directive, and `true' if the generic parser should handle the directive.
Many of the target specific directive handlers would `return Error' which does
not follow these semantics. This change simply changes the target specific
routines to conform to the semantis of the ParseDirective correctly.
Conformance to the semantics improves diagnostics emitted for the invalid
directives. X86 is taken as a sample to ensure that multiple diagnostics are
not presented for a single error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199068 91177308-0d34-0410-b5e6-96231b3b80d8
An improper qualifier would result in a superfluous error due to the parser not
consuming the remainder of the statement. Simply consume the remainder of the
statement to avoid the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199035 91177308-0d34-0410-b5e6-96231b3b80d8
The implicit immediate 0 forms are assembly aliases, not distinct instruction
encodings. Fix the initial implementation introduced in r198914 to an alias to
avoid two separate instruction definitions for the same encoding.
An InstAlias is insufficient in this case as the necessary due to the need to
add a new additional operand for the implicit zero. By using the AsmPsuedoInst,
fall back to the C++ code to transform the instruction to the equivalent
_POST_IMM form, inserting the additional implicit immediate 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199032 91177308-0d34-0410-b5e6-96231b3b80d8
A 32-bit immediate value can be formed from a constant expression and loaded
into a register. Add support to emit this into an object file. Because this
value is a constant, a relocation must *not* be produced for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199023 91177308-0d34-0410-b5e6-96231b3b80d8
The disassembler would no longer be able to disambiguage between the two
variants (explicit immediate #0 vs implicit, omitted #0) for the ldrt, strt,
ldrbt, strbt mnemonics as both versions indicated the disassembler routine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198944 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU assembler supports prefixing the expression with a '#' to indiciate that
the value that is being moved is infact a constant. This improves the
compatibility of the integrated assembler's parser for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198916 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU assembler has an extension that allows for the elision of the paired
register (dt2) for the LDRD and STRD mnemonics. Add support for this in the
assembly parser. Canonicalise the usage during the instruction parsing from
the specified version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198915 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM indicates the mnemonics as follows:
ldrbt{<c>}{<q>} <Rt>, [<Rn>], {, #+/-<imm>}
ldrt{<c>}{<q>} <Rt>, [<Rn>] {, #+/-<imm>}
strbt{<c>}{<q>} <Rt>, [<Rn>] {, #<imm>}
strt{<c>}{<q>} <Rt>, [<Rn>] {, #+/-<imm>}
This improves the parser to deal with the implicit immediate 0 for the mnemonics
as per the specification.
Thanks to Joerg Sonnenberger for the tests!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198914 91177308-0d34-0410-b5e6-96231b3b80d8
They do *different* things to %esp, so they are not equivalent.
Rename PUSHi8 to PUSH32i8 and add the missing PUSH16i8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198761 91177308-0d34-0410-b5e6-96231b3b80d8
We can't do a perfect job here. We *have* to allow (%dx) even in 64-bit
mode, for example, because it might be used for an unofficial form of
the in/out instructions. We actually want to do a better job of validation
*later*. Perhaps *instead* of doing it where we are at the moment.
But for now, doing what validation we *can* do in the place that the code
already has its validation, is an improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198760 91177308-0d34-0410-b5e6-96231b3b80d8
It seems there is no separate instruction class for having AdSize *and*
OpSize bits set, which is required in order to disambiguate between all
these instructions. So add that to the disassembler.
Hm, perhaps we do need an AdSize16 bit after all?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198759 91177308-0d34-0410-b5e6-96231b3b80d8
Where "where possible" means that it's an immediate value and it's below
0x10000. In fact GAS will either truncate or error with larger values,
and will insist on using the addr32 prefix to get 32-bit addressing. So
perhaps we should do that, in a later patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198758 91177308-0d34-0410-b5e6-96231b3b80d8
JCXZ should have the 0x67 prefix only if we're in 32-bit mode, so make that
appropriately conditional. And JECXZ needs the prefix instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198757 91177308-0d34-0410-b5e6-96231b3b80d8
I couldn't see how to do this sanely without splitting RETQ from RETL.
Eric says: "sad about the inability to roundtrip them now, but...".
I have no idea what that means, but perhaps it wants preserving in the
commit comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198756 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the bulk of 16-bit output, and the corresponding test case
x86-16.s now looks mostly like the x86-32.s test case that it was
originally based on. A few irrelevant instructions have been dropped,
and there are still some corner cases to be fixed in subsequent patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198752 91177308-0d34-0410-b5e6-96231b3b80d8
Operands which involved label arithemetic would previously fail to parse. This
corrects that by adding the additional case for the shift operand validation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198735 91177308-0d34-0410-b5e6-96231b3b80d8
take type from the new symbol but merge them so that the type
is never "downgraded".
This is probably quite rare, except for IFUNC symbols which
we used to misassemble, losing the IFUNC type.
Fixes#18372.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198706 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds the pre-UAL aliases of fconsts and fconstd for
vmov.f32 and vmov.f64. They use an InstAlias rather than a
MnemonicAlias to properly support the predicate operand.
We need to support encoded 8-bit constants in order to implement the
pre-UAL fconsts/fconstd aliases for vmov.f32/vmov.f64, so this
commit also fixes parsing of encoded floating point constants used
in vmov.f32/vmov.f64 instructions. Now we can support assembly code
like this:
fconsts s0, #0x70
which is equivalent to vmov.f32 s0, #1.0.
Most of the code was already in place to support this feature.
Previously the code was trying to accept encoded 8-bit float
constants for the vmov.f32/vmov.f64 instructions. It looks like the
support for parsing encoded floats was lost in a refactoring in
commit r148556 and we did not have any tests in place to catch it.
The change in this commit is to keep the parsed value as a 32-bit
float instead of a 64-bit double because that is what the isFPImm()
function expects to find. There is no loss of precision by using a
32-bit float here because we are still limited to an 8-bit encoded
value in the end.
Additionally, we explicitly reject encoded 8-bit floats for
vmovf.32/64. This is the same as the current behavior, but we now do
it explicitly rather than accidently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198697 91177308-0d34-0410-b5e6-96231b3b80d8
Switch the context to be SmallVectors. This allows for saving additional
context when providing previous emission sites.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198665 91177308-0d34-0410-b5e6-96231b3b80d8
Move the unwinding context for the ARM IAS into a helper class. This is purely
a structural refactoring. A follow up change allows for recording additional
depth to improve diagnostics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198664 91177308-0d34-0410-b5e6-96231b3b80d8
Parse tag names as well as expressions. The former is part of the
specification, the latter is for improved compatibility with the GNU assembler.
Fix attribute value handling to be comformant to the specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198662 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a new virtual method Note into the AsmParser. This completements the
existing Warning and Error methods. Use the new method to clean up the output
of the unwind routines in the ARM AsmParser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198661 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds .abicalls and .set pic0 support which
affects the ELF ABI and its flags. In addition the patch uses
a common interface for both the MipsTargetSteamer and
MipsObjectStreamer that both the integrated and standalone
assemblers will use for the output for these directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198646 91177308-0d34-0410-b5e6-96231b3b80d8
The 0x66 prefix toggles between 16-bit and 32-bit addressing mode.
So in 32-bit mode it is used to switch to 16-bit addressing mode for the
following instruction, while in 16-bit mode it's the other way round — it's
used to switch to 32-bit mode instead.
Thus, emit the 0x66 prefix byte for OpSize only in 32-bit (and 64-bit) mode,
and introduce a new OpSize16 bit which is used in 16-bit mode instead.
This is just the basic infrastructure for that change; a subsequent patch
will add the new OpSize16 bit to the 32-bit instructions that need it.
Patch from David Woodhouse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198586 91177308-0d34-0410-b5e6-96231b3b80d8
This is not really expected to work right yet. Mostly because we will
still emit the OpSize (0x66) prefix in all the wrong places, along with
a number of other corner cases. Those will all be fixed in the subsequent
commits.
Patch from David Woodhouse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198584 91177308-0d34-0410-b5e6-96231b3b80d8
Add some tests to validate correct register selection, including a fix
to an existing test which was requiring the *wrong* output.
Patch from David Woodhouse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198566 91177308-0d34-0410-b5e6-96231b3b80d8
Checking the trailing letter of the mnemonic is insufficient. Be more thorough
in the scanning of the instruction to ensure that we correctly work with the
predicated mnemonics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198235 91177308-0d34-0410-b5e6-96231b3b80d8
In order to provide compatibility with the GNU assembler, provide aliases for
pre-UAL mnemonics for floating point operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198172 91177308-0d34-0410-b5e6-96231b3b80d8