This allows an important optimization to be re-enabled.
- If all uses / defs of a split interval can be folded, give the interval a
low spill weight so it would not be picked in case spilling is needed (avoid
pushing other intervals in the same BB to be spilled).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44601 91177308-0d34-0410-b5e6-96231b3b80d8
in the middle of a split basic block, create a new live interval starting at
the def. This avoid artifically extending the live interval over a number of
cycles where it is dead. e.g.
bb1:
= vr1204 (use / kill) <= new interval starts and ends here.
...
...
vr1204 = (new def) <= start a new interval here.
= vr1204 (use)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44436 91177308-0d34-0410-b5e6-96231b3b80d8
When a live interval is being spilled, rather than creating short, non-spillable
intervals for every def / use, split the interval at BB boundaries. That is, for
every BB where the live interval is defined or used, create a new interval that
covers all the defs and uses in the BB.
This is designed to eliminate one common problem: multiple reloads of the same
value in a single basic block. Note, it does *not* decrease the number of spills
since no copies are inserted so the split intervals are *connected* through
spill and reloads (or rematerialization). The newly created intervals can be
spilled again, in that case, since it does not span multiple basic blocks, it's
spilled in the usual manner. However, it can reuse the same stack slot as the
previously split interval.
This is currently controlled by -split-intervals-at-bb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44198 91177308-0d34-0410-b5e6-96231b3b80d8
MachineOperand auxInfo. Previous clunky implementation uses an external map
to track sub-register uses. That works because register allocator uses
a new virtual register for each spilled use. With interval splitting (coming
soon), we may have multiple uses of the same register some of which are
of using different sub-registers from others. It's too fragile to constantly
update the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44104 91177308-0d34-0410-b5e6-96231b3b80d8
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44037 91177308-0d34-0410-b5e6-96231b3b80d8
apints on big-endian machines if the bitwidth is
not a multiple of 8. Introduce a new helper,
MVT::getStoreSizeInBits, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43934 91177308-0d34-0410-b5e6-96231b3b80d8
should only effect x86 when using long double. Now
12/16 bytes are output for long double globals (the
exact amount depends on the alignment). This brings
globals in line with the rest of LLVM: the space
reserved for an object is now always the ABI size.
One tricky point is that only 10 bytes should be
output for long double if it is a field in a packed
struct, which is the reason for the additional
argument to EmitGlobalConstant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43688 91177308-0d34-0410-b5e6-96231b3b80d8
can be eliminated by the allocator is the destination and source targets the
same register. The most common case is when the source and destination registers
are in different class. For example, on x86 mov32to32_ targets GR32_ which
contains a subset of the registers in GR32.
The allocator can do 2 things:
1. Set the preferred allocation for the destination of a copy to that of its source.
2. After allocation is done, change the allocation of a copy destination (if
legal) so the copy can be eliminated.
This eliminates 443 extra moves from 403.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43662 91177308-0d34-0410-b5e6-96231b3b80d8
To do this it is necessary to add a "always inline" argument to the
memcpy node. For completeness I have also added this node to memmove
and memset. I have also added getMem* functions, because the extra
argument makes it cumbersome to use getNode and because I get confused
by it :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43172 91177308-0d34-0410-b5e6-96231b3b80d8
types. This is needed for SIGN_EXTEND_INREG at least.
It is not clear if this is correct for other operations.
On the other hand, for the various load/store actions
it seems to correct to return the type action, as is
currently done.
Also, it seems that SelectionDAG::getValueType can be
called for extended value types; introduce a map for
holding these, since we don't really want to extend
the vector to be 2^32 pointers long!
Generalize DAGTypeLegalizer::PromoteResult_TRUNCATE
and DAGTypeLegalizer::PromoteResult_INT_EXTEND to handle
the various funky possibilities that apints introduce,
for example that you can promote to a type that needs
to be expanded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43071 91177308-0d34-0410-b5e6-96231b3b80d8
top bit of a ValueType to be zero. Enforce this by ensuring
an assertion failure if someone tries to create a ValueType
without this property. I chose this minimal approach rather
than a more official integration of the notion of reserved
bits into ValueType because I'm hoping that the verifier will
be changed to no longer require this :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43031 91177308-0d34-0410-b5e6-96231b3b80d8
codegen support. This should have no effect on codegen
for other types. Debatable bits: (1) the use (abuse?)
of a set in SDNode::getValueTypeList; (2) the length of
getTypeToTransformTo, which maybe should be refactored
with a non-inline part for extended value types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43030 91177308-0d34-0410-b5e6-96231b3b80d8
take a deleted nodes vector, instead of requiring it.
One more significant change: Implement the start of a legalizer that
just works on types. This legalizer is designed to run before the
operation legalizer and ensure just that the input dag is transformed
into an output dag whose operand and result types are all legal, even
if the operations on those types are not.
This design/impl has the following advantages:
1. When finished, this will *significantly* reduce the amount of code in
LegalizeDAG.cpp. It will remove all the code related to promotion and
expansion as well as splitting and scalarizing vectors.
2. The new code is very simple, idiomatic, and modular: unlike
LegalizeDAG.cpp, it has no 3000 line long functions. :)
3. The implementation is completely iterative instead of recursive, good
for hacking on large dags without blowing out your stack.
4. The implementation updates nodes in place when possible instead of
deallocating and reallocating the entire graph that points to some
mutated node.
5. The code nicely separates out handling of operations with invalid
results from operations with invalid operands, making some cases
simpler and easier to understand.
6. The new -debug-only=legalize-types option is very very handy :),
allowing you to easily understand what legalize types is doing.
This is not yet done. Until the ifdef added to SelectionDAGISel.cpp is
enabled, this does nothing. However, this code is sufficient to legalize
all of the code in 186.crafty, olden and freebench on an x86 machine. The
biggest issues are:
1. Vectors aren't implemented at all yet
2. SoftFP is a mess, I need to talk to Evan about it.
3. No lowering to libcalls is implemented yet.
4. Various operations are missing etc.
5. There are FIXME's for stuff I hax0r'd out, like softfp.
Hey, at least it is a step in the right direction :). If you'd like to help,
just enable the #ifdef in SelectionDAGISel.cpp and compile code with it. If
this explodes it will tell you what needs to be implemented. Help is
certainly appreciated.
Once this goes in, we can do three things:
1. Add a new pass of dag combine between the "type legalizer" and "operation
legalizer" passes. This will let us catch some long-standing isel issues
that we miss because operation legalization often obfuscates the dag with
target-specific nodes.
2. We can rip out all of the type legalization code from LegalizeDAG.cpp,
making it much smaller and simpler. When that happens we can then
reimplement the core functionality left in it in a much more efficient and
non-recursive way.
3. Once the whole legalizer is non-recursive, we can implement whole-function
selectiondags maybe...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42981 91177308-0d34-0410-b5e6-96231b3b80d8
the source register will be coalesced to the super register of the LHS. Properly
merge in the live ranges of the resulting coalesced interval that were part of
the original source interval to the live interval of the super-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42961 91177308-0d34-0410-b5e6-96231b3b80d8
(almost) a register copy. However, it always coalesced to the register of the
RHS (the super-register). All uses of the result of a EXTRACT_SUBREG are sub-
register uses which adds subtle complications to load folding, spiller rewrite,
etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42899 91177308-0d34-0410-b5e6-96231b3b80d8
basic arithmetic works.
Rename RTLIB long double functions to distinguish
different flavors of long double; the lib functions
have different names, alas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42644 91177308-0d34-0410-b5e6-96231b3b80d8
scheduler will try a number of tricks in order to avoid generating the
copies. This may not be possible in case the node produces a chain value
that prevent movement. Try unfolding the load from the node before to allow
it to be moved / cloned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42625 91177308-0d34-0410-b5e6-96231b3b80d8
This version enhances the previous patch to add root initialization
as discussed here:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20070910/053455.html
Collector gives its subclasses control over generic algorithms:
unsigned NeededSafePoints; //< Bitmask of required safe points.
bool CustomReadBarriers; //< Default is to insert loads.
bool CustomWriteBarriers; //< Default is to insert stores.
bool CustomRoots; //< Default is to pass through to backend.
bool InitRoots; //< If set, roots are nulled during lowering.
It also has callbacks which collectors can hook:
/// If any of the actions are set to Custom, this is expected to
/// be overriden to create a transform to lower those actions to
/// LLVM IR.
virtual Pass *createCustomLoweringPass() const;
/// beginAssembly/finishAssembly - Emit module metadata as
/// assembly code.
virtual void beginAssembly(Module &M, std::ostream &OS,
AsmPrinter &AP,
const TargetAsmInfo &TAI) const;
virtual void finishAssembly(Module &M,
CollectorModuleMetadata &CMM,
std::ostream &OS, AsmPrinter &AP,
const TargetAsmInfo &TAI) const;
Various other independent algorithms could be implemented, but were
not necessary for the initial two collectors. Some examples are
listed here:
http://llvm.org/docs/GarbageCollection.html#collector-algos
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42466 91177308-0d34-0410-b5e6-96231b3b80d8
terminator) the one that has a CopyToReg use. This fixes
2006-05-11-InstrSched.ll with -new-cc-modeling-scheme.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42453 91177308-0d34-0410-b5e6-96231b3b80d8
It includes:
- location and of each safe point in machine code (identified by a
label)
- location of each root within the stack frame (identified by an
offset), including the metadata tag provided to llvm.gcroot in
the user program
- size of the stack frame (for collectors which want to cheat on
stack crawling :)
- and eventually will include liveness
It is to be populated by back-ends during code-generation.
CollectorModuleMetadata aggregates this information across the
entire module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42418 91177308-0d34-0410-b5e6-96231b3b80d8
function. The information isn't used heavily -- it's only used at the end
of exception handling emission -- so there's no need to cache it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42078 91177308-0d34-0410-b5e6-96231b3b80d8
"_-[NSString(local) isNullOrNil]".eh = 0
.no_dead_strip "_-[NSString(local) isNullOrNil]".eh
The ".eh" should be inside the quotes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42074 91177308-0d34-0410-b5e6-96231b3b80d8
Add a new DenseMapInfo::isEqual method to allow clients to redefine
the equality predicate used when probing the hash table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42042 91177308-0d34-0410-b5e6-96231b3b80d8
Implement some constant folding in SelectionDAG and
DAGCombiner using APFloat. Remove double versions
of constructor and getValue from ConstantFPSDNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41664 91177308-0d34-0410-b5e6-96231b3b80d8
Add APFloat interfaces to ConstantFP, SelectionDAG.
Fix integer bit in double->APFloat conversion.
Convert LegalizeDAG to use APFloat interface in
ConstantFPSDNode uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41587 91177308-0d34-0410-b5e6-96231b3b80d8
Changes related modules so VNInfo's are not copied. This decrease
copy coalescing time by 45% and overall compilation time by 10% on siod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41579 91177308-0d34-0410-b5e6-96231b3b80d8
1. Eliminate the costly live interval "swapping".
2. Change ValueNumberInfo container from SmallVector to std::vector. The former
performs slowly when the vector size is very large.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41536 91177308-0d34-0410-b5e6-96231b3b80d8
gcc exception handling: if an exception unwinds through
an invoke, then execution must branch to the invoke's
unwind target. We previously tried to enforce this by
appending a cleanup action to every selector, however
this does not always work correctly due to an optimization
in the C++ unwinding runtime: if only cleanups would be
run while unwinding an exception, then the program just
terminates without actually executing the cleanups, as
invoke semantics would require. I was hoping this
wouldn't be a problem, but in fact it turns out to be the
cause of all the remaining failures in the LLVM testsuite
(these also fail with -enable-correct-eh-support, so turning
on -enable-eh didn't make things worse!). Instead we need
to append a full-blown catch-all to the end of each
selector. The correct way of doing this depends on the
personality function, i.e. it is language dependent, so
can only be done by gcc. Thus this patch which generalizes
the eh.selector intrinsic so that it can handle all possible
kinds of action table entries (before it didn't accomodate
cleanups): now 0 indicates a cleanup, and filters have to be
specified using the number of type infos plus one rather than
the number of type infos. Related gcc patches will cause
Ada to pass a cleanup (0) to force the selector to always
fire, while C++ will use a C++ catch-all (null).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41484 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix some minor bugs related to special markers on val# def. ~0U means
undefined, ~1U means dead val#.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40916 91177308-0d34-0410-b5e6-96231b3b80d8
kill instruction #, and source register number (iff the value# is defined by a
copy).
- Now def instruction # is set for every value#, not just for copy defined ones.
- Update some outdated code related inactive live ranges.
- Kill info not yet set. That's next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40913 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
simply specify them as results and let scheduledag handle them. That
is, instead of
SDOperand Flag = DAG.getTargetNode(Opc, MVT::i32, MVT::Flag, ...)
SDOperand Result = DAG.getCopyFromReg(Chain, X86::EAX, MVT::i32, Flag)
Just write:
SDOperand Result = DAG.getTargetNode(Opc, MVT::i32, MVT::i32, ...)
And let scheduledag emit the move from X86::EAX to a virtual register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40710 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fills the last necessary bits to enable exceptions
handling in LLVM. Currently only on x86-32/linux.
In fact, this patch adds necessary intrinsics (and their lowering) which
represent really weird target-specific gcc builtins used inside unwinder.
After corresponding llvm-gcc patch will land (easy) exceptions should be
more or less workable. However, exceptions handling support should not be
thought as 'finished': I expect many small and not so small glitches
everywhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39855 91177308-0d34-0410-b5e6-96231b3b80d8
exception handling table if we encounter it multiple
times. Filters could be folded harder than this, but
that would mean a lot more work for not much gain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37908 91177308-0d34-0410-b5e6-96231b3b80d8
illegal value type will be transformed to, for code that needs the
register type after all transformations instead of just after the first
transformation.
Factor out the code that uses this information to do copy-from-regs and
copy-to-regs for various purposes into separate functions so that they
are done consistently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37781 91177308-0d34-0410-b5e6-96231b3b80d8
extended vector types. Remove the special SDNode opcodes used for pre-legalize
vector operations, and the special MVT::Vector type used with them. Adjust
lowering and legalize to work with the normal SDNode kinds instead, and to
use the normal MVT functions to work with vector types instead of using the
two special operands that the pre-legalize nodes held.
This allows pre-legalize and post-legalize DAGs, and the code that operates
on them, to be more consistent. Pre-legalize vector operators can be handled
more consistently with scalar operators. And, -view-dag-combine1-dags and
-view-legalize-dags now look prettier for vector code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37719 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLowering to SelectionDAG so that they have more convenient
access to the current DAG, in preparation for the ValueType routines
being changed from standalone functions to members of SelectionDAG for
the pre-legalize vector type changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37704 91177308-0d34-0410-b5e6-96231b3b80d8
VCONCAT_VECTORS. Use these for CopyToReg and CopyFromReg legalizing in
the case that the full register is to be split into subvectors instead
of scalars. This replaces uses of VBIT_CONVERT to present values as
vector-of-vector types in order to make whole subvectors accessible via
BUILD_VECTOR and EXTRACT_VECTOR_ELT.
This is in preparation for adding extended ValueType values, where
having vector-of-vector types is undesirable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37569 91177308-0d34-0410-b5e6-96231b3b80d8
simultaneously. Move that pass to SimpleRegisterCoalescing.
This makes it easier to implement alternative register allocation and
coalescing strategies while maintaining reuse of the existing live
interval analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37520 91177308-0d34-0410-b5e6-96231b3b80d8
(landing pad) when an exception unwinds through the call. This doesn't
quite match the way the dwarf unwinder works: by default it only jumps to
the landing pad if the catch or filter specification matches, and otherwise
it keeps on unwinding. There are two ways of specifying to the unwinder
that it should "always" (more on why there are quotes here later) jump to
the landing pad: follow the specification by a 0 typeid, or follow it by
the typeid for the NULL typeinfo. GCC does the first, and this patch makes
LLVM do the same as gcc. However there is a problem: the unwinder performs
optimizations based on C++ semantics (it only expects destructors to be
run if the 0 typeid fires - known as "cleanups"), meaning it assumes that no
exceptions will be raised and that the raised exception will be reraised
at the end of the cleanup code. So if someone writes their own LLVM code
using the exception intrinsics they will get a nasty surprise if they don't
follow these rules. The other possibility of using the typeid corresponding
to NULL (catch-all) causes the unwinder to make no assumptions, so this is
probably what we should use in the long-run. However since we are still
having trouble getting exception handling working properly, for the moment
it seems best to closely imitate GCC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37399 91177308-0d34-0410-b5e6-96231b3b80d8
simplifies the code in DwarfWriter, allows for multiple filters and
makes it trivial to specify filters accompanied by cleanups or catch-all
specifications (see next patch). What a deal! Patch blessed by Anton.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37398 91177308-0d34-0410-b5e6-96231b3b80d8
smaller than the preferred alignment, but so that the target can actually
specify a minimum alignment if needed. This fixes some objc protocol
failures Devang tracked down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37373 91177308-0d34-0410-b5e6-96231b3b80d8
v1 =
r2 = move v1
= op r2<kill>
...
r2 = move v1
= op r2<kill>
Clear the first r2 kill if v1 and r2 are joined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37050 91177308-0d34-0410-b5e6-96231b3b80d8
functions. This partly fixes PR1414: now we're restricted only to one
personality function per eh frame, not per module. Further work on
"multiple personalities" topic needs representative example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37018 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fix PR1380
2. Apply Duncan's patch from PR1410
3. Insert workaround for "one personality function per module" as noted in PR1414
4. Emit correct debug frames for x86/linux. This partly fixes DebugInfo/2006-11-06-StackTrace.cpp: stack trace is
shown correctly, but arguments for function on top of stack are displayed incorrectly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37015 91177308-0d34-0410-b5e6-96231b3b80d8
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36652 91177308-0d34-0410-b5e6-96231b3b80d8
- A register def / use now implicitly affects sub-register liveness but does
not affect liveness information of super-registers.
- Def of a larger register (if followed by a use later) is treated as
read/mod/write of a smaller register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36434 91177308-0d34-0410-b5e6-96231b3b80d8
long live interval that has low usage density.
1. Change order of coalescing to join physical registers with virtual
registers first before virtual register intervals become too long.
2. Check size and usage density to determine if it's worthwhile to join.
3. If joining is aborted, assign virtual register live interval allocation
preference field to the physical register.
4. Register allocator should try to allocate to the preferred register
first (if available) to create identify moves that can be eliminated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36218 91177308-0d34-0410-b5e6-96231b3b80d8
Also, fixed static case in presence of eax livin. This fixes PR331
PS: Why don't we still have push/pop instructions? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36195 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fix some bugs in the jump table lowering threshold
2. Implement much better metric for optimal pivot selection
3. Tune thresholds for different lowering methods
4. Implement shift-and trick for lowering small (<machine word
length) cases with few destinations. Good testcase will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35816 91177308-0d34-0410-b5e6-96231b3b80d8
go to the same destination. Now we're producing really good code for
switch-lower-feature.ll testcase
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35672 91177308-0d34-0410-b5e6-96231b3b80d8
Intrinsic functions might need to be generated (if they are overloaded) so
returning a const char* is no longer possible. Change getOperationName to
return a std::string instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35543 91177308-0d34-0410-b5e6-96231b3b80d8
Add an "iAny" ValueType as a place holder for an integer type of any
bit width. This is used for intrinsics overloading on integer type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35538 91177308-0d34-0410-b5e6-96231b3b80d8