in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57885 91177308-0d34-0410-b5e6-96231b3b80d8
Where previously LLVM might emit code like this:
ucomisd %xmm1, %xmm0
setne %al
setp %cl
orb %al, %cl
jne .LBB4_2
it now emits this:
ucomisd %xmm1, %xmm0
jne .LBB4_2
jp .LBB4_2
It has fewer instructions and uses fewer registers, but it does
have more branches. And in the case that this code is followed by
a non-fallthrough edge, it may be followed by a jmp instruction,
resulting in three branch instructions in sequence. Some effort
is made to avoid this situation.
To achieve this, X86ISelLowering.cpp now recognizes FCMP_OEQ and
FCMP_UNE in lowered form, and replace them with code that emits
two branches, except in the case where it would require converting
a fall-through edge to an explicit branch.
Also, X86InstrInfo.cpp's branch analysis and transform code now
knows now to handle blocks with multiple conditional branches. It
uses loops instead of having fixed checks for up to two
instructions. It can now analyze and transform code generated
from FCMP_OEQ and FCMP_UNE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57873 91177308-0d34-0410-b5e6-96231b3b80d8
the copy instruction from the instruction list before asking the
target to create the new instruction. This gets the old instruction
out of the way so that it doesn't interfere with the target's
rematerialization code. In the case of x86, this helps it find
more cases where EFLAGS is not live.
Also, in the X86InstrInfo.cpp, teach isSafeToClobberEFLAGS to check
to see if it reached the end of the block after scanning each
instruction, instead of just before. This lets it notice when the
end of the block is only two instructions away, without doing any
additional scanning.
These changes allow rematerialization to clobber EFLAGS in more
cases, for example using xor instead of mov to set the return value
to zero in the included testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57872 91177308-0d34-0410-b5e6-96231b3b80d8
for strange asm conditions earlier. In this case, we have a
double being passed in an integer reg class. Convert to like
sized integer register so that we allocate the right number
for the class (two i32's for the f64 in this case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57862 91177308-0d34-0410-b5e6-96231b3b80d8
is re-written by the callback to branch directly to the compiled code
in future invocations.
Added back in range-based memory permission functions for the updating of
the stub on Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57846 91177308-0d34-0410-b5e6-96231b3b80d8
result type when the result type is legal but
not the operand type. Add additional support
for EXTRACT_SUBVECTOR and CONCAT_VECTORS,
needed to handle such cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57840 91177308-0d34-0410-b5e6-96231b3b80d8
the condition of a SELECT node. Make sure that the
correct extension type (any-, sign- or zero-extend)
is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57836 91177308-0d34-0410-b5e6-96231b3b80d8
LowerOperation if it doesn't know what else to do.
This methods should probably be factorized some,
but this is good enough for the moment. Have
LowerATOMIC_BINARY_64 use EXTRACT_ELEMENT rather
than assuming the operand is a BUILD_PAIR (if it
is then getNode will automagically simplify the
EXTRACT_ELEMENT). This way LowerATOMIC_BINARY_64
usable from LegalizeTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57831 91177308-0d34-0410-b5e6-96231b3b80d8
elements. Otherwise LegalizeTypes will, reasonably
enough, legalize the mask, which may result in it
no longer being a BUILD_VECTOR node (LegalizeDAG
simply ignores the legality or not of vector masks).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57782 91177308-0d34-0410-b5e6-96231b3b80d8
the previous patch this one actually passes make check.
"Fix PR2356 on PowerPC: if we have an input and output that are tied together
that have different sizes (e.g. i32 and i64) make sure to reserve registers for
the bigger operand."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57771 91177308-0d34-0410-b5e6-96231b3b80d8
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57748 91177308-0d34-0410-b5e6-96231b3b80d8
have an unreachable block in a function. This was triggering the assert. This is
a horrid hack to cover this up.
Oh! for a good debug info architecture!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57714 91177308-0d34-0410-b5e6-96231b3b80d8
in 32-bit mode instead of assigning a register pair. This has nothing to
do with PR2356, but I happened to notice it while working on it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57704 91177308-0d34-0410-b5e6-96231b3b80d8
array. Improve some minor comments, refactor some helpers in
AsmOperandInfo. No functionality change for valid code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57686 91177308-0d34-0410-b5e6-96231b3b80d8
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57663 91177308-0d34-0410-b5e6-96231b3b80d8
shift counts, and patterns that match dynamic shift counts
when the subtract is obscured by a truncate node.
Add DAGCombiner support for recognizing rotate patterns
when the shift counts are defined by truncate nodes.
Fix and simplify the code for commuting shld and shrd
instructions to work even when the given instruction doesn't
have a parent, and when the caller needs a new instruction.
These changes allow LLVM to use the shld, shrd, rol, and ror
instructions on x86 to replace equivalent code using two
shifts and an or in many more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57662 91177308-0d34-0410-b5e6-96231b3b80d8
using the 'volatile' qualifier. This should not have any operational consequences
on code, because tags should always be stripped off (giving a non-volatile pointer)
before dereferencing. The new qualification is there to catch some attempts to use
tagged pointers in a context where an untagged pointer is appropriate.
Notably this approach does not catch dereferencing of tagged pointers, but helps
in separating the two concepts a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57641 91177308-0d34-0410-b5e6-96231b3b80d8
x86 backend. These will all be answered with "patches welcome", so
a PR doesn't help drive them along.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57630 91177308-0d34-0410-b5e6-96231b3b80d8
basically working, feel free to remove the tag. The other targets have
really basic things that break them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57628 91177308-0d34-0410-b5e6-96231b3b80d8
because it declares a std::vector<MachineMove>, and strict
concept checking requires the definition of MachineMove to be
available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57617 91177308-0d34-0410-b5e6-96231b3b80d8
to find opportunities for store-to-load forwarding or load CSE,
in the same way that visitStore scans back to do DSE. Also, define
a new helper function for testing whether the addresses of two
memory accesses are known to have the same value, and use it in
both visitStore and visitLoad.
These two changes allow instcombine to eliminate loads in code
produced by front-ends that frequently emit obviously redundant
addressing for memory references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57608 91177308-0d34-0410-b5e6-96231b3b80d8
the predicates by extending simple predicates to create
more complex predicates instead of duplicating the logic
for the simple predicates.
This doesn't reduce much redundancy in DAGISelEmitter.cpp's
generated source yet; that will require improvements to
DAGISelEmitter.cpp's instruction sorting, to make it more
effectively group nodes with similar predicates together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57565 91177308-0d34-0410-b5e6-96231b3b80d8
integer type. Invalid things like 'float 42' are now rejected by the
semantic analysis in the productions not the parser. This fixes PR2733.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57560 91177308-0d34-0410-b5e6-96231b3b80d8
are due to argument passing in calls. This is significant because
it hits all immediate arguments to calls on x86-32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57556 91177308-0d34-0410-b5e6-96231b3b80d8
1. Compute action in X86SelectSelect based on MVT instead of type.
2. Use TLI.getValueType(..) instead of MVT::getVT(..) because the former
handles pointers and the later doesn't.
3. Don't pass TLI into isTypeLegal, since it already has access to it as
an ivar.
#2 gives fast isel some minor new functionality: handling load/stores of
pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57552 91177308-0d34-0410-b5e6-96231b3b80d8
which makes it easy to share the compare/imm folding logic with 'setcc'.
This shaves a bunch of instructions off the common select case, which
happens a lot in llvm-gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57549 91177308-0d34-0410-b5e6-96231b3b80d8
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57542 91177308-0d34-0410-b5e6-96231b3b80d8
- Move the EH landing-pad code and adjust it so that it works
with FastISel as well as with SDISel.
- Add FastISel support for @llvm.eh.exception and
@llvm.eh.selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57539 91177308-0d34-0410-b5e6-96231b3b80d8
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57521 91177308-0d34-0410-b5e6-96231b3b80d8
- Renumber fcmp predicates to match their icmp counterparts.
- Try swapping operands to expose more optimization opportunities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57513 91177308-0d34-0410-b5e6-96231b3b80d8
create a new DAG node to represent the new shift to keep the
DAG consistent, even though it'll almost always be folded into
the address.
If a user of the resulting address has multiple uses, the
nodes may get revisited by a later MatchAddress call, in which
case DAG inconsistencies do matter.
This fixes PR2849.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57465 91177308-0d34-0410-b5e6-96231b3b80d8
returned by BinomialCoefficient and don't try to operate with them. This
replaces the previous fix for PR2857.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57431 91177308-0d34-0410-b5e6-96231b3b80d8
parameters instead of raw Constants. This prevents the constants from
being selected by the isel pass, fixing PR2735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57385 91177308-0d34-0410-b5e6-96231b3b80d8
the same pattern as roundpd/roundps, the Intel compiler
builtins do not: rounds* has an extra operand. Fixes
gcc.target/i386/sse4_1-rounds[sd]-[1234].c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57370 91177308-0d34-0410-b5e6-96231b3b80d8
GCC 4.4.0 gives an error on the "int" declaration for example
saying that it has already been declared (using the "short"
one). Using templates here allow the compiler to distinguish
between the function to choose.
Also, "llvm/Support/DataTypes.h" was not included, leading to
error messages about not knowing "uint32_t" for example.
Patch by Samuel Tardieu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57292 91177308-0d34-0410-b5e6-96231b3b80d8
instead.
So now: -fast-isel or -fast-isel=true enable fast-isel, and
-fast-isel=false disables it. Fast-isel is also on by default
with -fast, and off by default otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57270 91177308-0d34-0410-b5e6-96231b3b80d8
SDISel typically adds them in. This makes it a little easier
to compare FastISel output with SDISel output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57266 91177308-0d34-0410-b5e6-96231b3b80d8
X86::CL that was used, emit an EXTRACT_SUBREG from the CL
super-register to CL. This more precisely describes how the
CL register is being used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57264 91177308-0d34-0410-b5e6-96231b3b80d8
since -0.0 can't be represented as an int.
This prevents llvm from reducing -0.0 to a
load-and-convert of int 0. Fixes
ieee.exp/mzero[2356].c in gcc testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57224 91177308-0d34-0410-b5e6-96231b3b80d8
are Inexact. (These are not Inexact as defined
by IEEE754, but that seems like a reasonable way
to abstract what happens: information is lost.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57218 91177308-0d34-0410-b5e6-96231b3b80d8
This includes not marking a GEP involving a vector as unsafe, but only when it
has all zero indices. This allows scalarrepl to work in a few more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57177 91177308-0d34-0410-b5e6-96231b3b80d8
shifting and masking inside a bswap expr. This allows it to handle
the cases from PR2842, which involve the intermediate 'or'
expressions being shifted, not just the input value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57095 91177308-0d34-0410-b5e6-96231b3b80d8
when deciding whether to mark a function readnone/readonly.
Since the pass is currently run before SROA, this may be
quite helpful. Requested by Chris on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57050 91177308-0d34-0410-b5e6-96231b3b80d8
expand to multiple basic blocks, in which case fast-isel
needs to informed of which block to use as it resumes
inserting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57040 91177308-0d34-0410-b5e6-96231b3b80d8
was setting kill flags on tied uses in two-address instructions.
The kill flags were causing the allocator to think it could
allocate the use and its tied def in different registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57039 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, just create one, and make sure everything that needs
it can access it. Previously most of the SelectionDAGISel
subclasses all had their own TargetLowering object, which was
redundant with the TargetLowering object in the TargetMachine
subclasses, except on Sparc, where SparcTargetMachine
didn't have a TargetLowering object. Change Sparc to work
more like the other targets here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57016 91177308-0d34-0410-b5e6-96231b3b80d8
this handling to work properly for modifying stub functions, relocations
back to entry points after JIT compilation, etc..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57013 91177308-0d34-0410-b5e6-96231b3b80d8
than the type an i1 is promoted to (eg: i8). Account
for this. Noticed by Tilmann Scheller on CellSPU; he
will hopefully take care of fixing this in LegalizeDAG
and adding a testcase!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56997 91177308-0d34-0410-b5e6-96231b3b80d8
can be used when deciding if a block can transfer control to another
via a fall-through instead of a branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56968 91177308-0d34-0410-b5e6-96231b3b80d8
the same source. I don't know what I was thinking when I wrote this originally.
Note: There's probably a more efficient way to do this, but I need to think about it some more, and about what determinism
guarantees need to be present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56964 91177308-0d34-0410-b5e6-96231b3b80d8
local register allocator's physreg liveness doesn't recognize subregs,
so it doesn't know that defs of %ecx that are immediately followed by
uses of %cl aren't dead. This comes up due to the way fast-isel emits
shift instructions.
This is a temporary workaround. Arguably, local regalloc should
handle subreg references correctly. On the other hand, perhaps
fast-isel should use INSERT_SUBREG instead of just assigning to the
most convenient super-register of %cl when lowering shifts.
This fixes MultiSource/Benchmarks/MallocBench/espresso,
MultiSource/Applications/hexxagon, and others, under -fast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56947 91177308-0d34-0410-b5e6-96231b3b80d8
a constant vector ("{0x123, 0x456}" syntax). The fix is to simplify the
_mm_srli_si128 macro, and move the "* 8" from the macro into the compiler
back-end. I can't change the existing __builtins because so many people are
using them :-(."
Patch by Stuart Hastings!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56944 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the 64-bit forms to use+def RSP instead of ESP. This
doesn't fix any real bugs today, but it is more precise and it
makes the debug dumps on x86-64 look more consistent.
Also, add some comments describing the CALL instructions' physreg
operand uses and defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56925 91177308-0d34-0410-b5e6-96231b3b80d8
pointer bitcasts and GEP's", and centralize the
logic in Value::getUnderlyingObject. The
difference with stripPointerCasts is that
stripPointerCasts only strips GEPs if all
indices are zero, while getUnderlyingObject
strips GEPs no matter what the indices are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56922 91177308-0d34-0410-b5e6-96231b3b80d8
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56885 91177308-0d34-0410-b5e6-96231b3b80d8
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56867 91177308-0d34-0410-b5e6-96231b3b80d8
"If a re-materializable instruction has a register
operand, the spiller will change the register operand's
spill weight to HUGE_VAL to avoid it being spilled.
However, if the operand is already in the queue ready
to be spilled, avoid re-materializing it".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56837 91177308-0d34-0410-b5e6-96231b3b80d8
and X86FastISel.cpp into X86MachineFunction.h, so that it
can be shared, instead of having each selector keep track
of its own.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56825 91177308-0d34-0410-b5e6-96231b3b80d8