Fast ISel isn't able to handle 'insertvalue' and it causes a large slowdown
during -O0 compilation. We don't necessarily need to generate an aggregate of
the values here if they're just going to be extracted directly afterwards.
<rdar://problem/10530851>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146481 91177308-0d34-0410-b5e6-96231b3b80d8
test cases where there were a lot of relocations applied relative to a large
rodata section. Gas would create a symbol for each of these whereas we would
be relative to the beginning of the rodata section. This change mimics what
gas does.
Patch by Jack Carter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146468 91177308-0d34-0410-b5e6-96231b3b80d8
undefined result. This adds new ISD nodes for the new semantics,
selecting them when the LLVM intrinsic indicates that the undef behavior
is desired. The new nodes expand trivially to the old nodes, so targets
don't actually need to do anything to support these new nodes besides
indicating that they should be expanded. I've done this for all the
operand types that I could figure out for all the targets. Owners of
various targets, please review and let me know if any of these are
incorrect.
Note that the expand behavior is *conservatively correct*, and exactly
matches LLVM's current behavior with these operations. Ideally this
patch will not change behavior in any way. For example the regtest suite
finds the exact same instruction sequences coming out of the code
generator. That's why there are no new tests here -- all of this is
being exercised by the existing test suite.
Thanks to Duncan Sands for reviewing the various bits of this patch and
helping me get the wrinkles ironed out with expanding for each target.
Also thanks to Chris for clarifying through all the discussions that
this is indeed the approach he was looking for. That said, there are
likely still rough spots. Further review much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146466 91177308-0d34-0410-b5e6-96231b3b80d8
Constant pool entries with different alignment may cause more alignment
padding to be inserted. Compute the amount of padding needed, and try to
pick the location that requires the least amount of padding.
Also take the extra padding into account when the water is above the
use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146458 91177308-0d34-0410-b5e6-96231b3b80d8
This should always be done as a matter of principal. I don't have a
case that exposes the problem. I just noticed this recently while
scanning the code and realized I meant to fix it long ago.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146438 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
If we create new intervals for a variable that is being spilled, then those new intervals are not guaranteed to also spill. This means that anything reading from the original spilling value might not get the correct value if spills were missed.
Fixes <rdar://problem/10546864>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146428 91177308-0d34-0410-b5e6-96231b3b80d8
These modifiers simply select either the low or high D subregister of a Neon
Q register. I've also removed the unimplemented 'p' modifier, which turns out
to be a bit different than the comment here suggests and as far as I can tell
was only intended for internal use in Apple's version of gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146417 91177308-0d34-0410-b5e6-96231b3b80d8
detected in the forward-CFG DFS. This prevents the reverse-CFG from
visiting blocks inside loops after blocks that dominate them in the
case where loops have multiple exits.
No testcase, because this fixes a bug which in practice only shows
up in a full optimizer run, due to the use-list order.
This fixes rdar://10422791 and others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146408 91177308-0d34-0410-b5e6-96231b3b80d8
Downgrade the alignment of the initial constant island when constant
pool entries are moved elsewhere.
This is all gated by -arm-align-constant-islands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146391 91177308-0d34-0410-b5e6-96231b3b80d8
Order constant pool entries by descending alignment in the initial
island to ensure packing and correct alignment. When the command line
flag is set, also align the basic block containing the constant pool
entries.
This is only a partial implementation of constant island alignment. More
to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146375 91177308-0d34-0410-b5e6-96231b3b80d8
indicates whether the intrinsic has a defined result for a first
argument equal to zero. This will eventually allow these intrinsics to
accurately model the semantics of GCC's __builtin_ctz and __builtin_clz
and the X86 instructions (prior to AVX) which implement them.
This patch merely sets the stage by extending the signature of these
intrinsics and establishing auto-upgrade logic so that the old spelling
still works both in IR and in bitcode. The upgrade logic preserves the
existing (inefficient) semantics. This patch should not change any
behavior. CodeGen isn't updated because it can use the existing
semantics regardless of the flag's value.
Note that this will be followed by API updates to Clang and DragonEgg.
Reviewed by Nick Lewycky!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146357 91177308-0d34-0410-b5e6-96231b3b80d8
The OptLevel is now redundant with the TargetMachine*.
And selectTarget() isn't really JIT-specific and could probably
get refactored into one of the lower level libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146355 91177308-0d34-0410-b5e6-96231b3b80d8
The split point is picked such that the newly created water has the same
alignment as the function. This makes the island suitable for constant
pool entries with potentially higher alignment.
This also fixes an issue where the basic block was split one instruction
too late, causing nonconvergence of the algorithm.
<rdar://problem/10550705>
There is still an issue with correctly packing differently aligned
entries in the island.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146314 91177308-0d34-0410-b5e6-96231b3b80d8
does. The _GLOBAL_OFFSET_TABLE_ is still magical in that we get a R_386_GOTPC,
but it doesn't change the immediate in the same way as when the expression
has no right hand side symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146311 91177308-0d34-0410-b5e6-96231b3b80d8
Since we're not rewriting IVs in other loops, there's not much reason
to consider their stride when generating formulae.
This should reduce the number of useless formulas considered by LSR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146302 91177308-0d34-0410-b5e6-96231b3b80d8
Backwards compatibility with 'gas'. #imm is the preferered and documented
syntax, but lots of existing code uses the '$' prefix, so we should
support it if we can.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146285 91177308-0d34-0410-b5e6-96231b3b80d8
When the immediate operand of an AND or BIC instruction isn't representable
in the immediate field of the instruction, but the bitwise negation of the
immediate is, assemble the instruction as the inverse operation instead
with the inverted immediate as the operand.
rdar://10550057
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146283 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the instructions into fixed writeback and register-stride
writeback variants to simplify the offset operand (no more optional
register operand using reg0). This is a simpler representation and allows
the assembly parser to more easily handle these instructions.
Add tests for the instruction variants now supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146278 91177308-0d34-0410-b5e6-96231b3b80d8
generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146262 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Brendon Cahoon!
This extends the existing LoopUnroll and LoopUnrollPass. Brendon
measured no regressions in the llvm test suite with -unroll-runtime
enabled. This implementation works by using the existing loop
unrolling code to unroll the loop by a power-of-two (default 8). It
generates an if-then-else sequence of code prior to the loop to
execute the extra iterations before entering the unrolled loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146245 91177308-0d34-0410-b5e6-96231b3b80d8
symbol difference. This matches gas behavior and fixes PR11513.
We still don't handle _GLOBAL_OFFSET_TABLE_ in data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146238 91177308-0d34-0410-b5e6-96231b3b80d8
MipsTargetLowering::LowerGlobalTLSAddress. This is necessary to have
call16(__tls_get_addr) emitted instead of got_disp(__tls_get_addr) when the
target is Mips64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146183 91177308-0d34-0410-b5e6-96231b3b80d8
- Modify lowering of global TLS address nodes.
- Modify isel of ThreadPointer.
- Wrap target global TLS address nodes that are operands of loads with WrapperPIC.
- Remove Mips-specific DAG nodes TlsGd, TprelHi and TprelLo, which can be
substituted with other existing nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146175 91177308-0d34-0410-b5e6-96231b3b80d8
clients to decide whether to look inside bundled instructions and whether
the query should return true if any / all bundled instructions have the
queried property.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146168 91177308-0d34-0410-b5e6-96231b3b80d8
if (HasAVX)
X86SSELevel = NoMMXSSE;
This is so patterns that are predicated on hasSSE3, etc. would not be selected when avx is available. Instead, the AVX variant is selected.
However, this breaks instructions which do not have AVX variants.
The right way to fix this is for the SSE but not-AVX patterns to predicate on something like hasSSE3() && !hasAVX().
Then we can take out the hack in X86Subtarget.cpp. Patterns which do not have AVX variants do not need to change.
However, we need to audit all the patterns before we make the change. This patch is workaround that fixes one specific case,
the prefetch instructions. rdar://10538297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146163 91177308-0d34-0410-b5e6-96231b3b80d8
We must not issue a bitcast operation for integer-promotion of vector types, because the
location of the values in the vector may be different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146150 91177308-0d34-0410-b5e6-96231b3b80d8
It is not used any more. We are tracking inline assembly misalignments
directly through the BBInfo.Unalign and KnownBits fields.
A simple conservative size estimate is not good enough since it can
cause alignment padding to be underestimated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146124 91177308-0d34-0410-b5e6-96231b3b80d8
Compute alignment padding before and after basic blocks dynamically.
Heed basic block alignment.
This simplifies bookkeeping because we don't have to constantly add and
remove padding from BBInfo.Size. It also makes it possible to track the
extra known alignment bits we get after a tBR_JTr terminator and when
entering an aligned basic block.
This makes the ARMConstantIslandPass aware of aligned basic blocks.
It is tricky to model block alignment correctly when dealing with inline
assembly and tBR_JTr instructions that have variable size. If inline
assembly turns out to be smaller than expected, that may cause following
alignment padding to be larger than expected. This could cause constant
pool entries to move out of range.
To avoid that problem, we use the worst case alignment padding following
inline assembly. This may cause slightly suboptimal constant island
placement in aligned basic blocks following inline assembly. Normal
functions should be unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146118 91177308-0d34-0410-b5e6-96231b3b80d8
files. First, add a new block USELIST_BLOCK to the bitcode format. This is
where USELIST_CODE_ENTRYs will be stored. The format of the USELIST_CODE_ENTRYs
have not yet been defined. Add support in the BitcodeReader for parsing the
USELIST_BLOCK.
Part of rdar://9860654 and PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146078 91177308-0d34-0410-b5e6-96231b3b80d8
When the file isn't being built with subsections-via-symbols, symbol
differences involving non-local symbols can be resolved more aggressively.
Needed for gas compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146054 91177308-0d34-0410-b5e6-96231b3b80d8
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
The block offset can be computed from the previous block. That is more
robust than keeping track of a delta.
Eliminate one redundant AdjustBBOffsetsAfter call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146018 91177308-0d34-0410-b5e6-96231b3b80d8
Data type suffix aliasing. Previously handled via lots of instruction
aliases. Cleanup of those forthcoming.
rdar://10435076
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146007 91177308-0d34-0410-b5e6-96231b3b80d8
This flag is used when bundling machine instructions. It indicates
whether the operand reads a value defined inside or outside its bundle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145997 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change yet. Will be implementing range-checked immediates
for better diagnostics and disambiguation of instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145994 91177308-0d34-0410-b5e6-96231b3b80d8
1. Added opcode BUNDLE
2. Taught MachineInstr class to deal with bundled MIs
3. Changed MachineBasicBlock iterator to skip over bundled MIs; added an iterator to walk all the MIs
4. Taught MachineBasicBlock methods about bundled MIs
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145975 91177308-0d34-0410-b5e6-96231b3b80d8
This pseudo-instruction contains a .align directive in its expansion, so
the total size may vary by 2 bytes.
It is too difficult to accurately keep track of this alignment
directive, just use the worst-case size instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145971 91177308-0d34-0410-b5e6-96231b3b80d8
ARMConstantIslandPass may sometimes leave empty constant islands behind
(it really shouldn't). Remove the alignment from the empty islands so
the size calculations are still correct.
This should fix the many Thumb1 assembler errors in the nightly test
suite.
The reduced test case for this problem is way too big. That is to be
expected for ARMConstantIslandPass bugs.
<rdar://problem/10534709>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145970 91177308-0d34-0410-b5e6-96231b3b80d8
- Walking over pred_begin/pred_end is an expensive operation.
- PHINodes contain a value for each predecessor anyway.
- While it may look like we used to save a few iterations with the set,
be aware that getIncomingValueForBlock does a linear search on
the values of the phi node.
- Another -5% on ARMDisassembler.cpp (Release build). This was the last
entry in the profile that was obviously wasting time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145937 91177308-0d34-0410-b5e6-96231b3b80d8
It's always good to prune early, but formulae that are unsatisfactory
in their own right need to be removed before running any other pruning
heuristics. We easily avoid generating such formulae, but we need them
as an intermediate basis for forming other good formulae.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145906 91177308-0d34-0410-b5e6-96231b3b80d8
The new register allocator is much more able to split back up ranges too constrained by register classes.
Fixes <rdar://problem/10466609>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145899 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, all ARM::CONSTPOOL_ENTRY instructions had a hardwired
alignment of 4 bytes emitted by ARMAsmPrinter. Now the same alignment
is set on the basic block.
This is in preparation of supporting ARM constant pool islands with
different alignments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145890 91177308-0d34-0410-b5e6-96231b3b80d8
This was actually a bit of a mess. TLI.setPrefLoopAlignment was clearly
documented as taking log2(bytes) units, but the x86 target would still
set a preferred loop alignment of '16'.
CodePlacementOpt passed this number on to the basic block, and
AsmPrinter interpreted it as bytes.
Now both MachineFunction and MachineBasicBlock use logarithmic
alignments.
Obviously, MachineConstantPool still measures alignments in bytes, so we
can emulate the thrill of using as.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145889 91177308-0d34-0410-b5e6-96231b3b80d8
Whether a fixup needs relaxation for the associated instruction is a
target-specific function, as the FIXME indicated. Create a hook for that
and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145881 91177308-0d34-0410-b5e6-96231b3b80d8
don't do this now, but add a test case to prevent this from happening in the
future.
Additional test for rdar://9892684
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145879 91177308-0d34-0410-b5e6-96231b3b80d8
Not right yet, as the rules for when to relax in the MCAssembler aren't
(yet) correct for ARM. This is a step in the proper direction, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145871 91177308-0d34-0410-b5e6-96231b3b80d8
memory fences) in statistics registration, which works the same way that
ManagedStatic registration does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145869 91177308-0d34-0410-b5e6-96231b3b80d8
where this would be bad as the backend shouldn't have a problem inlining small
memcpys.
rdar://10510150
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145865 91177308-0d34-0410-b5e6-96231b3b80d8