For VLD3/VLD4 with double-spaced registers, add the implicit use of the
super register for both the instruction loading the even registers and the
instruction loading the odd registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113452 91177308-0d34-0410-b5e6-96231b3b80d8
option to disable base pointer usage, pay attention to it when deciding
if we can realign (if no base pointer and VLAs, we can't).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113366 91177308-0d34-0410-b5e6-96231b3b80d8
register must be one of the destination registers for the load. Otherwise,
the tLDM instruction will write-back to the base register, which isn't what's
desired (otherwise, we'd have a t2LDM_UPD instead).
rdar://8394087
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113297 91177308-0d34-0410-b5e6-96231b3b80d8
of a mneumonic, report operand errors with better location
info. For example, we now report:
t.s:6:14: error: invalid operand for instruction
cwtl $1
^
but we fail for common cases like:
t.s:11:4: error: invalid operand for instruction
addl $1, $1
^
because we don't know if this is supposed to be the reg/imm or imm/reg
form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113178 91177308-0d34-0410-b5e6-96231b3b80d8
into the middle of the class, and rework how the different sections of
the generated file are conditionally included for simplicity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113163 91177308-0d34-0410-b5e6-96231b3b80d8
"For ARM stack frames that utilize variable sized objects and have either
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs."
r112986 fixed a latent bug exposed by the above.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112989 91177308-0d34-0410-b5e6-96231b3b80d8
alignment should be performed. Otherwise dynamic realignment may trigger
when the register allocator has already used the frame pointer as a general
purpose register. That is, we need to make sure that the list of reserved
registers doesn't change after register allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112986 91177308-0d34-0410-b5e6-96231b3b80d8
instructions prior to regalloc. Since it's getting a little close to
the 2.8 branch deadline, I'll have to leave the rest of the instructions
handled by the NEONPreAllocPass for now, but I didn't want to leave half
of the VLD instructions converted and the other half not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112983 91177308-0d34-0410-b5e6-96231b3b80d8
vabd intrinsic and add and/or zext operations. In the case of vaba, this
also avoids the need for a DAG combine pattern to combine vabd with add.
Update tests. Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112941 91177308-0d34-0410-b5e6-96231b3b80d8
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs.
rdar://7352504
rdar://8374540
rdar://8355680
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112883 91177308-0d34-0410-b5e6-96231b3b80d8
add, and subtract operations with zero-extended or sign-extended vectors.
Update tests. Add auto-upgrade support for the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112773 91177308-0d34-0410-b5e6-96231b3b80d8
int x(int t) {
if (t & 256)
return -26;
return 0;
}
We generate this:
tst.w r0, #256
mvn r0, #25
it eq
moveq r0, #0
while gcc generates this:
ands r0, r0, #256
it ne
mvnne r0, #25
bx lr
Scandalous really!
During ISel time, we can look for this particular pattern. One where we have a
"MOVCC" that uses the flag off of a CMPZ that itself is comparing an AND
instruction to 0. Something like this (greatly simplified):
%r0 = ISD::AND ...
ARMISD::CMPZ %r0, 0 @ sets [CPSR]
%r0 = ARMISD::MOVCC 0, -26 @ reads [CPSR]
All we have to do is convert the "ISD::AND" into an "ARM::ANDS" that sets [CPSR]
when it's zero. The zero value will all ready be in the %r0 register and we only
need to change it if the AND wasn't zero. Easy!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112664 91177308-0d34-0410-b5e6-96231b3b80d8
kill flag.
This could cause duplicate kill flags when the same register was used twice in a
continuous sequence of STRs.
There is no small test case. <rdar://problem/8218046>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112534 91177308-0d34-0410-b5e6-96231b3b80d8
help relieve register pressure a bit. Recalculating the local address is
almost always going to be better than spilling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112503 91177308-0d34-0410-b5e6-96231b3b80d8
operand is killed, add it to the expanded instruction as an implicit kill
operand instead of marking the individual subregs with kill flags. This
should work better in general and also handles the case for VST3 where one
of the subregs was not referenced in the expanded instruction and so was
not marked killed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112494 91177308-0d34-0410-b5e6-96231b3b80d8
optional modified register (instead of reg0). Along with r112461 it will make
sure that the optional define of CPSR is marked as "def" and will thus mark the
instructions using these classes (t2ANDS*) as setting the 's' flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112462 91177308-0d34-0410-b5e6-96231b3b80d8
IR add/sub operations with one or both operands sign- or zero-extended.
Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112416 91177308-0d34-0410-b5e6-96231b3b80d8
the special values that for ARM would be used with IB or DA modes. Fall
through and consider materializing a new base address is it would be
profitable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112329 91177308-0d34-0410-b5e6-96231b3b80d8
all the other LDM/STM instructions. This fixes asm printer crashes when
compiling with -O0. I've changed one of the NEON tests (vst3.ll) to run
with -O0 to check this in the future.
Prior to this change VLDM/VSTM used addressing mode #5, but not really.
The offset field was used to hold a count of the number of registers being
loaded or stored, and the AM5 opcode field was expanded to specify the IA
or DB mode, instead of the standard ADD/SUB specifier. Much of the backend
was not aware of these special cases. The crashes occured when rewriting
a frameindex caused the AM5 offset field to be changed so that it did not
have a valid submode. I don't know exactly what changed to expose this now.
Maybe we've never done much with -O0 and NEON. Regardless, there's no longer
any reason to keep a count of the VLDM/VSTM registers, so we can use
addressing mode #4 and clean things up in a lot of places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112322 91177308-0d34-0410-b5e6-96231b3b80d8
still having a significant effect. It shouldn't be now that the pre-RA
virtual base reg stuff is in. Assuming that's valididated by the nightly
testers, we can simplify a lot of the PEI frame index code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112220 91177308-0d34-0410-b5e6-96231b3b80d8
comparison with 0. These two pieces of code should give identical results:
rsbs r1, r1, 0
cmp r0, r1
mov r0, #0
it ls
mov r0, #1
and:
cmn r0, r1
mov r0, #0
it ls
mov r0, #1
However, the CMN gives the *opposite* result when r1 is 0. This is because the
carry flag is set in the CMP case but not in the CMN case. In short, the CMP
instruction doesn't perform a truncate of the (logical) NOT of 0 plus the value
of r0 and the carry bit (because the "carry bit" parameter to AddWithCarry is
defined as 1 in this case, the carry flag will always be set when r0 >= 0). The
CMN instruction doesn't perform a NOT of 0 so there is never a "carry" when this
AddWithCarry is performed (because the "carry bit" parameter to AddWithCarry is
defined as 0).
The AddWithCarry in the CMP case seems to be relying upon the identity:
~x + 1 = -x
However when x is 0 and unsigned, this doesn't hold:
x = 0
~x = 0xFFFF FFFF
~x + 1 = 0x1 0000 0000
(-x = 0) != (0x1 0000 0000 = ~x + 1)
Therefore, we should disable *all* versions of CMN, especially when comparing
against zero, until we can limit when the CMN instruction is used (when we know
that the RHS is not 0) or when we have a hardware fix for this.
(See the ARM docs for the "AddWithCarry" pseudo-code.)
This is related to <rdar://problem/7569620>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112176 91177308-0d34-0410-b5e6-96231b3b80d8
with the VST4 instructions. Until after register allocation, we want to
represent sets of adjacent registers by a single super-register. These
VST4 pseudo instructions have a single QQ or QQQQ source register operand.
They get expanded to the real VST4 instructions with 4 separate D register
operands. Once this conversion is complete, we'll be able to remove the
NEONPreAllocPass and avoid some fragile and hacky code elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112108 91177308-0d34-0410-b5e6-96231b3b80d8
comparison that would overflow.
- The other under/overflow cases can't actually happen because the immediates
which would trigger them are legal (so we don't enter this code), but
adjusted the style to make it clear the transform is always valid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112053 91177308-0d34-0410-b5e6-96231b3b80d8
For now it's still a command line option, but the interface to the generic
code doesn't need to know that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111942 91177308-0d34-0410-b5e6-96231b3b80d8
Intended to help ease reproducing problems by increasing base register usage
after heuristics for only using the when needed are in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111930 91177308-0d34-0410-b5e6-96231b3b80d8
that it needs to go away. Use loadRegFromStackSlot where possible.
Also, remember to update the value map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111883 91177308-0d34-0410-b5e6-96231b3b80d8
frame index reference to an object in the local block is seen, check if
it's near enough to any previously allocaated base register to re-use.
rdar://8277890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111443 91177308-0d34-0410-b5e6-96231b3b80d8
Nothing fancy, just ask the target if any currently available base reg
is in range for the instruction under consideration and use the first one
that is. Placeholder ARM implementation simply returns false for now.
ongoing saga of rdar://8277890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111374 91177308-0d34-0410-b5e6-96231b3b80d8
the local block. Resolve references to those indices to a new base register.
For simplification and testing purposes, a new virtual base register is
allocated for each frame index being resolved. The result is truly horrible,
but correct, code that's good for exercising the new code paths.
Next up is adding thumb1 support, which should be very simple. Following that
will be adding base register re-use and implementing a reasonable ARM
heuristic for when a virtual base register should be generated at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111315 91177308-0d34-0410-b5e6-96231b3b80d8
whether to allocate a virtual frame base register to resolve the frame
index reference in it. Implement a simple version for ARM to aid debugging.
In LocalStackSlotAllocation, scan the function for frame index references
to local frame indices and ask the target whether to allocate virtual
frame base registers for any it encounters. Purely infrastructural for
debug output. Next step is to actually allocate base registers, then add
intelligent re-use of them.
rdar://8277890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111262 91177308-0d34-0410-b5e6-96231b3b80d8
printing "lsl #0". This fixes the remaining parts of pr7792. Make
corresponding changes for encoding/decoding these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111251 91177308-0d34-0410-b5e6-96231b3b80d8
the memory barrier variants (other than 'SY' full system domain read and write)
are treated as one instruction with option operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110951 91177308-0d34-0410-b5e6-96231b3b80d8
entry for ARM STRBT is actually a super-instruction for A8.6.199 STRBT A1 & A2.
Recover by looking for ARM:USAT encoding pattern before delegating to the auto-
gened decoder.
Added a "usat" test case to arm-tests.txt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110894 91177308-0d34-0410-b5e6-96231b3b80d8
float t1(int argc) {
return (argc == 1123) ? 1.234f : 2.38213f;
}
We would generate truly awful code on ARM (those with a weak stomach should look
away):
_t1:
movw r1, #1123
movs r2, #1
movs r3, #0
cmp r0, r1
mov.w r0, #0
it eq
moveq r0, r2
movs r1, #4
cmp r0, #0
it ne
movne r3, r1
adr r0, #LCPI1_0
ldr r0, [r0, r3]
bx lr
The problem was that legalization was creating a cascade of SELECT_CC nodes, for
for the comparison of "argc == 1123" which was fed into a SELECT node for the ?:
statement which was itself converted to a SELECT_CC node. This is because the
ARM back-end doesn't have custom lowering for SELECT nodes, so it used the
default "Expand".
I added a fairly simple "LowerSELECT" to the ARM back-end. It takes care of this
testcase, but can obviously be expanded to include more cases.
Now we generate this, which looks optimal to me:
_t1:
movw r1, #1123
movs r2, #0
cmp r0, r1
adr r0, #LCPI0_0
it eq
moveq r2, #4
ldr r0, [r0, r2]
bx lr
.align 2
LCPI0_0:
.long 1075344593 @ float 2.382130e+00
.long 1067316150 @ float 1.234000e+00
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110799 91177308-0d34-0410-b5e6-96231b3b80d8
