Under the large code model, we cannot assume that __morestack lives within
2^31 bytes of the call site, so we cannot use pc-relative addressing. We
cannot perform the call via a temporary register, as the rax register may
be used to store the static chain, and all other suitable registers may be
either callee-save or used for parameter passing. We cannot use the stack
at this point either because __morestack manipulates the stack directly.
To avoid these issues, perform an indirect call via a read-only memory
location containing the address.
This solution is not perfect, as it assumes that the .rodata section
is laid out within 2^31 bytes of each function body, but this seems to
be sufficient for JIT.
Differential Revision: http://reviews.llvm.org/D6787
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225003 91177308-0d34-0410-b5e6-96231b3b80d8
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224985 91177308-0d34-0410-b5e6-96231b3b80d8
The else case ResultReg was not checked for validity.
To my surprise, this case was not hit in any of the
existing test cases. This includes a new test cases
that tests this path.
Also drop the `target triple` declaration from the
original test as suggested by H.J. Lu, because
apparently with it the test won't be run on Linux
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224901 91177308-0d34-0410-b5e6-96231b3b80d8
If the control flow is modelling an if-statement where the only instruction in
the 'then' basic block (excluding the terminator) is a call to cttz/ctlz,
CodeGenPrepare can try to speculate the cttz/ctlz call and simplify the control
flow graph.
Example:
\code
entry:
%cmp = icmp eq i64 %val, 0
br i1 %cmp, label %end.bb, label %then.bb
then.bb:
%c = tail call i64 @llvm.cttz.i64(i64 %val, i1 true)
br label %end.bb
end.bb:
%cond = phi i64 [ %c, %then.bb ], [ 64, %entry]
\code
In this example, basic block %then.bb is taken if value %val is not zero.
Also, the phi node in %end.bb would propagate the size-of in bits of %val
only if %val is equal to zero.
With this patch, CodeGenPrepare will try to hoist the call to cttz from %then.bb
into basic block %entry only if cttz is cheap to speculate for the target.
Added two new hooks in TargetLowering.h to let targets customize the behavior
(i.e. decide whether it is cheap or not to speculate calls to cttz/ctlz). The
two new methods are 'isCheapToSpeculateCtlz' and 'isCheapToSpeculateCttz'.
By default, both methods return 'false'.
On X86, method 'isCheapToSpeculateCtlz' returns true only if the target has
LZCNT. Method 'isCheapToSpeculateCttz' only returns true if the target has BMI.
Differential Revision: http://reviews.llvm.org/D6728
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224899 91177308-0d34-0410-b5e6-96231b3b80d8
Determining the address of a TLS variable results in a function call in
certain TLS models. This means that a simple ICmpInst might actually
result in invalidating the CTR register.
In such cases, do not attempt to rely on the CTR register for loop
optimization purposes.
This fixes PR22034.
Differential Revision: http://reviews.llvm.org/D6786
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224890 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224884 91177308-0d34-0410-b5e6-96231b3b80d8
When materializing constant i1 values, they must be zero extended. We represent
i1 values as [0, 1], not [0, -1], in i32 registers. As it turns out, this code
path was dead for i1 values prior to r216006 (which is why this did not manifest in
miscompiles until recently).
Fixes -O0 self-hosting on PPC64/Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224842 91177308-0d34-0410-b5e6-96231b3b80d8
Bob Wilson pointed out the unnecessary checks that had been committed to the
instruction check predicates. The check was meant to ensure that the check was
not accidentally applied to non-ARM instructions. This is better served as an
assertion rather than a condition check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224825 91177308-0d34-0410-b5e6-96231b3b80d8
This removes a hardcoded list of instructions in the CodeEmitter. Eventually I intend to remove the predicates on the affected instructions since in any given mode two of them are valid if we supported addr32/addr16 prefixes in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224809 91177308-0d34-0410-b5e6-96231b3b80d8
On non-Darwin PPC64, the TOC reload needs to come directly after the bctrl
instruction (for indirect calls) because the 'bctrl/ld 2, 40(1)' instruction
sequence is interpreted by the unwinding code in libgcc. To make sure these
occur as a pair, as with other pairings interpreted by the linker, fuse the two
instructions into one instruction (for code generation only).
In the future, we might wish to do this by emitting CFI directives instead,
but this solution is simpler, and mirrors what GCC does. Additional discussion
on this point is contained in the PR.
Fixes PR22015.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224788 91177308-0d34-0410-b5e6-96231b3b80d8
It is tempting to mark the fixed stack slot used to store the return address as
immutable when lowering @llvm.returnaddress(i32 0). Unfortunately, within the
function, it is not completely immutable: it is written during the function
prologue. When using post-RA instruction scheduling, the prologue instructions
are available for scheduling, and we're not free to interchange the order of a
particular store in the prologue with loads from that stack location.
Fixes PR21976.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224761 91177308-0d34-0410-b5e6-96231b3b80d8
In r224033, in moving the signed power-of-2 division expansion into
BuildSDIVPow2, I accidentally made it possible to attempt the lowering for a
64-bit division on PPC32. This later asserts.
Fixes PR21928.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224758 91177308-0d34-0410-b5e6-96231b3b80d8
r223862/r224203 tried to also combine base-updating load/stores.
There was a mistake there: the alignment was added as is as an operand to
the ARMISD::VLD/VST node. However, the VLD/VST selection logic doesn't care
about less-than-standard alignment attributes.
For example, no matter the alignment of a v2i64 load (say 1), SelectVLD picks
VLD1q64 (because of the memory type). But VLD1q64 ("vld1.64 {dXX, dYY}") is
8-aligned, per ARMARMv7a 3.2.1.
For the 1-aligned load, what we really want is VLD1q8.
This commit introduces bitcasts if necessary, and changes the vld/vst type to
one whose standard alignment matches the original load/store alignment.
Differential Revision: http://reviews.llvm.org/D6759
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224754 91177308-0d34-0410-b5e6-96231b3b80d8
When combining consecutive loads+inserts into a single vector load,
we should keep the alignment of the base load. Doing otherwise can, and does,
lead to using overly aligned instructions. In the included test case, for
example, using a 32-byte vmovaps on a 16-byte aligned value. Oops.
rdar://19190968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224746 91177308-0d34-0410-b5e6-96231b3b80d8
Previously I tried to plug musttail into the existing vararg lowering
code. That turned out to be a mistake, because non-vararg calls use
significantly different register lowering, even on x86. For example, AVX
vectors are usually passed in registers to normal functions and memory
to vararg functions. Now musttail uses a completely separate lowering.
Hopefully this can be used as the basis for non-x86 perfect forwarding.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D6156
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224745 91177308-0d34-0410-b5e6-96231b3b80d8
Followup to r224294:
ARM/AArch64: Attach the FrameSetup MIFlag to CFI instructions.
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224743 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when ctpop is supported for scalar types, the expansion of
@llvm.ctpop.vXiY uses vector element extractions, insertions and individual
calls to @llvm.ctpop.iY. When not, expansion with bit-math operations is used
for the scalar calls.
Local haswell measurements show that we can improve vector @llvm.ctpop.vXiY
expansion in some cases by using a using a vector parallel bit twiddling
approach, based on:
v = v - ((v >> 1) & 0x55555555);
v = (v & 0x33333333) + ((v >> 2) & 0x33333333);
v = ((v + (v >> 4) & 0xF0F0F0F)
v = v + (v >> 8)
v = v + (v >> 16)
v = v & 0x0000003F
(from http://graphics.stanford.edu/~seander/bithacks.html#CountBitsSetParallel)
When scalar ctpop isn't supported, the approach above performs better for
v2i64, v4i32, v4i64 and v8i32 (see numbers below). And even when scalar ctpop
is supported, this approach performs ~2x better for v8i32.
Here, x86_64 implies -march=corei7-avx without ctpop and x86_64h includes ctpop
support with -march=core-avx2.
== [x86_64h - new]
v8i32: 0.661685
v4i32: 0.514678
v4i64: 0.652009
v2i64: 0.324289
== [x86_64h - old]
v8i32: 1.29578
v4i32: 0.528807
v4i64: 0.65981
v2i64: 0.330707
== [x86_64 - new]
v8i32: 1.003
v4i32: 0.656273
v4i64: 1.11711
v2i64: 0.754064
== [x86_64 - old]
v8i32: 2.34886
v4i32: 1.72053
v4i64: 1.41086
v2i64: 1.0244
More work for other vector types will come next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224725 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the existing code which handles this for zext. This makes this
more useful for targets with ZeroOrNegativeOne BooleanContent and
obsoletes a custom combine SI uses for i1 setcc (sext(i1), 0, setne)
since the constant will now be shrunk to i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224691 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM states:
LDM/LDMIA/LDMFD:
The SP can be in the list. However, ARM deprecates using these instructions
with SP in the list.
ARM deprecates using these instructions with both the LR and the PC in the
list.
LDMDA/LDMFA/LDMDB/LDMEA/LDMIB/LDMED:
The SP can be in the list. However, instructions that include the SP in the
list are deprecated.
Instructions that include both the LR and the PC in the list are deprecated.
POP:
The SP can only be in the list before ARMv7. ARM deprecates any use of ARM
instructions that include the SP, and the value of the SP after such an
instruction is UNKNOWN.
ARM deprecates the use of this instruction with both the LR and the PC in
the list.
Attempt to diagnose use of deprecated forms of these instructions. This mirrors
the previous changes to diagnose use of the deprecated forms of STM in ARM mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224682 91177308-0d34-0410-b5e6-96231b3b80d8
It is intended to be used for a family of personality functions that
have similar IR preparation requirements. Typically when interoperating
with MSVC personality functions, bits of functionality need to be
outlined from the main function into helper functions. There is also
usually more than one landing pad per invoke, which does not match the
LLVM IR landingpad representation.
None of this is implemented yet. This change just adds a new enum that
is active for *-windows-msvc and delegates to the EH removal preparation
pass. No functionality change for other targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224625 91177308-0d34-0410-b5e6-96231b3b80d8
The constant bus restrictions only apply to VALU instructions. This
enables SIFoldOperands to fold immediates into SALU instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224623 91177308-0d34-0410-b5e6-96231b3b80d8
mubuf instructions now define the soffset field using the SCSrc_32
register class which indicates that only SGPRs and inline constants
are allowed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224622 91177308-0d34-0410-b5e6-96231b3b80d8
Fix an off-by-one access introduced in 224502 for push.w and pop.w with single
register operands. Add test cases for both scenarios.
Thanks to Asiri Rathnayake for pointing out the failure!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224521 91177308-0d34-0410-b5e6-96231b3b80d8
Added RegOp2MemOpTable4 to transform 4th operand from register to memory in merge-masked versions of instructions.
Added lowering tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224516 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM Architecture Reference Manual states the following:
LDM{,IA,DB}:
The SP cannot be in the list.
The PC can be in the list.
If the PC is in the list:
• the LR must not be in the list
• the instruction must be either outside any IT block, or the last
instruction in an IT block.
POP:
The PC can be in the list.
If the PC is in the list:
• the LR must not be in the list
• the instruction must be either outside any IT block, or the last
instruction in an IT block.
PUSH:
The SP and PC can be in the list in ARM instructions, but not in Thumb
instructions.
STM:{,IA,DB}:
The SP and PC can be in the list in ARM instructions, but not in Thumb
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224502 91177308-0d34-0410-b5e6-96231b3b80d8
Near as I can tell prefixes are ignored on these instructions except for a comment in the Intel docs about 0xf3. Binutils disassembler seems to ignore prefixes on these instructions. Our disassembler still doesn't distinguish PS and "no prefix" well enough for this to make a functional change, but it helps with experiments I'm doing on a potential new disassembler table builder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224496 91177308-0d34-0410-b5e6-96231b3b80d8
of the abi we should be using. For targets that don't use the
option there's no change, otherwise this allows external users
to set the ABI via string and avoid some of the -backend-option
pain in clang.
Use this option to move the ABI for the ARM port from the
Subtarget to the TargetMachine and update the testcases
accordingly since it's no longer valid to set via -mattr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224492 91177308-0d34-0410-b5e6-96231b3b80d8
same. This will change the "bare metal" ABI from APCS to AAPCS.
The only difference between the front and back end code is that
the code for Triple::GNU was added for environment. That will migrate
to the front end shortly.
Tests updated with the ABI they were originally testing in the case
of bare metal (e.g. -mtriple armv7) or with a -gnu for arm-linux
triples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224489 91177308-0d34-0410-b5e6-96231b3b80d8
This was missed last time around, for the P8 Instruction Scheduling
changes (223257). This will hook the P8Model entry in so those
changes will actually be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224452 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With isSingleValueType starting to treat vector types as single-value types,
code that uses this interface needs to be updated.
Test Plan:
vector-global.ll
nvcl-param-align.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D6573
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224440 91177308-0d34-0410-b5e6-96231b3b80d8
The assert was off-by-one, resulting in failures for valid input.
Thanks to Asiri Rathnayake for pointing out the failure!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224432 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the case of a BUILD_VECTOR being constructed out of elements extracted from a vector twice the size of the result vector. Previously this was always scalarized. Now, we try to construct a shuffle node that feeds on extract_subvectors.
This fixes PR15872 and provides a partial fix for PR21711.
Differential Revision: http://reviews.llvm.org/D6678
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224429 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When generating MIPS assembly, LLVM always overrides the default assembler options by emitting the '.set noreorder', '.set nomacro' and '.set noat' directives,
while GCC uses the default options if an assembly-level function contains inline assembly code.
This becomes a problem when the code generated by LLVM is interleaved with inline assembly which assumes GCC-like assembler options (from Linux, for example).
This patch fixes these conflicts by setting the appropriate assembler options at the beginning of an inline asm block and popping them at the end.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224425 91177308-0d34-0410-b5e6-96231b3b80d8
The type promotion helper does not support vector type, so when make
such it does not kick in in such cases.
Original commit message:
[CodeGenPrepare] Move sign/zero extensions near loads using type promotion.
This patch extends the optimization in CodeGenPrepare that moves a sign/zero
extension near a load when the target can combine them. The optimization may
promote any operations between the extension and the load to make that possible.
Although this optimization may be beneficial for all targets, in particular
AArch64, this is enabled for X86 only as I have not benchmarked it for other
targets yet.
** Context **
Most targets feature extended loads, i.e., loads that perform a zero or sign
extension for free. In that context it is interesting to expose such pattern in
CodeGenPrepare so that the instruction selection pass can form such loads.
Sometimes, this pattern is blocked because of instructions between the load and
the extension. When those instructions are promotable to the extended type, we
can expose this pattern.
** Motivating Example **
Let us consider an example:
define void @foo(i8* %addr1, i32* %addr2, i8 %a, i32 %b) {
%ld = load i8* %addr1
%zextld = zext i8 %ld to i32
%ld2 = load i32* %addr2
%add = add nsw i32 %ld2, %zextld
%sextadd = sext i32 %add to i64
%zexta = zext i8 %a to i32
%addza = add nsw i32 %zexta, %zextld
%sextaddza = sext i32 %addza to i64
%addb = add nsw i32 %b, %zextld
%sextaddb = sext i32 %addb to i64
call void @dummy(i64 %sextadd, i64 %sextaddza, i64 %sextaddb)
ret void
}
As it is, this IR generates the following assembly on x86_64:
[...]
movzbl (%rdi), %eax # zero-extended load
movl (%rsi), %es # plain load
addl %eax, %esi # 32-bit add
movslq %esi, %rdi # sign extend the result of add
movzbl %dl, %edx # zero extend the first argument
addl %eax, %edx # 32-bit add
movslq %edx, %rsi # sign extend the result of add
addl %eax, %ecx # 32-bit add
movslq %ecx, %rdx # sign extend the result of add
[...]
The throughput of this sequence is 7.45 cycles on Ivy Bridge according to IACA.
Now, by promoting the additions to form more extended loads we would generate:
[...]
movzbl (%rdi), %eax # zero-extended load
movslq (%rsi), %rdi # sign-extended load
addq %rax, %rdi # 64-bit add
movzbl %dl, %esi # zero extend the first argument
addq %rax, %rsi # 64-bit add
movslq %ecx, %rdx # sign extend the second argument
addq %rax, %rdx # 64-bit add
[...]
The throughput of this sequence is 6.15 cycles on Ivy Bridge according to IACA.
This kind of sequences happen a lot on code using 32-bit indexes on 64-bit
architectures.
Note: The throughput numbers are similar on Sandy Bridge and Haswell.
** Proposed Solution **
To avoid the penalty of all these sign/zero extensions, we merge them in the
loads at the beginning of the chain of computation by promoting all the chain of
computation on the extended type. The promotion is done if and only if we do not
introduce new extensions, i.e., if we do not degrade the code quality.
To achieve this, we extend the existing “move ext to load” optimization with the
promotion mechanism introduced to match larger patterns for addressing mode
(r200947).
The idea of this extension is to perform the following transformation:
ext(promotableInst1(...(promotableInstN(load))))
=>
promotedInst1(...(promotedInstN(ext(load))))
The promotion mechanism in that optimization is enabled by a new TargetLowering
switch, which is off by default. In other words, by default, the optimization
performs the “move ext to load” optimization as it was before this patch.
** Performance **
Configuration: x86_64: Ivy Bridge fixed at 2900MHz running OS X 10.10.
Tested Optimization Levels: O3/Os
Tests: llvm-testsuite + externals.
Results:
- No regression beside noise.
- Improvements:
CINT2006/473.astar: ~2%
Benchmarks/PAQ8p: ~2%
Misc/perlin: ~3%
The results are consistent for both O3 and Os.
<rdar://problem/18310086>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224402 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: As a side-quest for D6629 jvoung pointed out that I should use -verify-machineinstrs and this found a bug in x86-32's handling of EFLAGS for PUSHF/POPF. This patch fixes the use/def, and adds -verify-machineinstrs to all x86 tests which contain 'EFLAGS'. One exception: this patch leaves inline-asm-fpstack.ll as-is because it fails -verify-machineinstrs in a way unrelated to EFLAGS. This patch also modifies cmpxchg-clobber-flags.ll along the lines of what D6629 already does by also testing i386.
Test Plan: ninja check
Reviewers: t.p.northover, jvoung
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224359 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends the optimization in CodeGenPrepare that moves a sign/zero
extension near a load when the target can combine them. The optimization may
promote any operations between the extension and the load to make that possible.
Although this optimization may be beneficial for all targets, in particular
AArch64, this is enabled for X86 only as I have not benchmarked it for other
targets yet.
** Context **
Most targets feature extended loads, i.e., loads that perform a zero or sign
extension for free. In that context it is interesting to expose such pattern in
CodeGenPrepare so that the instruction selection pass can form such loads.
Sometimes, this pattern is blocked because of instructions between the load and
the extension. When those instructions are promotable to the extended type, we
can expose this pattern.
** Motivating Example **
Let us consider an example:
define void @foo(i8* %addr1, i32* %addr2, i8 %a, i32 %b) {
%ld = load i8* %addr1
%zextld = zext i8 %ld to i32
%ld2 = load i32* %addr2
%add = add nsw i32 %ld2, %zextld
%sextadd = sext i32 %add to i64
%zexta = zext i8 %a to i32
%addza = add nsw i32 %zexta, %zextld
%sextaddza = sext i32 %addza to i64
%addb = add nsw i32 %b, %zextld
%sextaddb = sext i32 %addb to i64
call void @dummy(i64 %sextadd, i64 %sextaddza, i64 %sextaddb)
ret void
}
As it is, this IR generates the following assembly on x86_64:
[...]
movzbl (%rdi), %eax # zero-extended load
movl (%rsi), %es # plain load
addl %eax, %esi # 32-bit add
movslq %esi, %rdi # sign extend the result of add
movzbl %dl, %edx # zero extend the first argument
addl %eax, %edx # 32-bit add
movslq %edx, %rsi # sign extend the result of add
addl %eax, %ecx # 32-bit add
movslq %ecx, %rdx # sign extend the result of add
[...]
The throughput of this sequence is 7.45 cycles on Ivy Bridge according to IACA.
Now, by promoting the additions to form more extended loads we would generate:
[...]
movzbl (%rdi), %eax # zero-extended load
movslq (%rsi), %rdi # sign-extended load
addq %rax, %rdi # 64-bit add
movzbl %dl, %esi # zero extend the first argument
addq %rax, %rsi # 64-bit add
movslq %ecx, %rdx # sign extend the second argument
addq %rax, %rdx # 64-bit add
[...]
The throughput of this sequence is 6.15 cycles on Ivy Bridge according to IACA.
This kind of sequences happen a lot on code using 32-bit indexes on 64-bit
architectures.
Note: The throughput numbers are similar on Sandy Bridge and Haswell.
** Proposed Solution **
To avoid the penalty of all these sign/zero extensions, we merge them in the
loads at the beginning of the chain of computation by promoting all the chain of
computation on the extended type. The promotion is done if and only if we do not
introduce new extensions, i.e., if we do not degrade the code quality.
To achieve this, we extend the existing “move ext to load” optimization with the
promotion mechanism introduced to match larger patterns for addressing mode
(r200947).
The idea of this extension is to perform the following transformation:
ext(promotableInst1(...(promotableInstN(load))))
=>
promotedInst1(...(promotedInstN(ext(load))))
The promotion mechanism in that optimization is enabled by a new TargetLowering
switch, which is off by default. In other words, by default, the optimization
performs the “move ext to load” optimization as it was before this patch.
** Performance **
Configuration: x86_64: Ivy Bridge fixed at 2900MHz running OS X 10.10.
Tested Optimization Levels: O3/Os
Tests: llvm-testsuite + externals.
Results:
- No regression beside noise.
- Improvements:
CINT2006/473.astar: ~2%
Benchmarks/PAQ8p: ~2%
Misc/perlin: ~3%
The results are consistent for both O3 and Os.
<rdar://problem/18310086>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224351 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for PR21709 ( http://llvm.org/bugs/show_bug.cgi?id=21709 ).
When we have 2 consecutive 16-byte loads that are merged into one 32-byte vector,
we can use a single 32-byte load instead.
But we don't do this for SandyBridge / IvyBridge because they have slower 32-byte memops.
We also don't bother using 32-byte *integer* loads on a machine that only has AVX1 (btver2)
because those operands would have to be split in half anyway since there is no support for
32-byte integer math ops.
Differential Revision: http://reviews.llvm.org/D6492
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224344 91177308-0d34-0410-b5e6-96231b3b80d8
According to AVX specification:
"Most arithmetic and data processing instructions encoded using the VEX prefix and
performing memory accesses have more flexible memory alignment requirements
than instructions that are encoded without the VEX prefix. Specifically,
With the exception of explicitly aligned 16 or 32 byte SIMD load/store instructions,
most VEX-encoded, arithmetic and data processing instructions operate in
a flexible environment regarding memory address alignment, i.e. VEX-encoded
instruction with 32-byte or 16-byte load semantics will support unaligned load
operation by default. Memory arguments for most instructions with VEX prefix
operate normally without causing #GP(0) on any byte-granularity alignment
(unlike Legacy SSE instructions)."
The same for AVX-512.
This change does not affect anything right now, because only the "memop pattern fragment"
depends on FeatureVectorUAMem and it is not used in AVX patterns.
All AVX patterns are based on the "unaligned load" anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224330 91177308-0d34-0410-b5e6-96231b3b80d8
The use of SP and PC in the register list for stores is deprecated on ARM
(ARM ARM A.8.8.199):
ARM deprecates the use of ARM instructions that include the SP or the PC in
the list.
Provide a deprecation warning from the assembler in the case that the syntax is
ever seen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224319 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC backend, somewhat embarrassingly, did not generate an
optimal-length sequence of instructions for a 32-bit bswap. While adding a
pattern for the bswap intrinsic to fix this would not have been terribly
difficult, doing so would not have addressed the real problem: we had been
generating poor code for many bit-permuting operations (by which I mean things
like byte-swap that permute the bits of one or more inputs around in various
ways). Here are some initial steps toward solving this deficiency.
Bit-permuting operations are represented, at the SDAG level, using ISD::ROTL,
SHL, SRL, AND and OR (mostly with constant second operands). Looking back
through these operations, we can build up a description of the bits in the
resulting value in terms of bits of one or more input values (and constant
zeros). For each bit, we compute the rotation amount from the original value,
and then group consecutive (value, rotation factor) bits into groups. Groups
sharing these attributes are then collected and sorted, and we can then
instruction select the entire permutation using a combination of masked
rotations (rlwinm), imm ands (andi/andis), and masked rotation inserts
(rlwimi).
The result is that instead of lowering an i32 bswap as:
rlwinm 5, 3, 24, 16, 23
rlwinm 4, 3, 24, 0, 7
rlwimi 4, 3, 8, 8, 15
rlwimi 5, 3, 8, 24, 31
rlwimi 4, 5, 0, 16, 31
we now produce:
rlwinm 4, 3, 8, 0, 31
rlwimi 4, 3, 24, 16, 23
rlwimi 4, 3, 24, 0, 7
and for the 'test6' example in the PowerPC/README.txt file:
unsigned test6(unsigned x) {
return ((x & 0x00FF0000) >> 16) | ((x & 0x000000FF) << 16);
}
we used to produce:
lis 4, 255
rlwinm 3, 3, 16, 0, 31
ori 4, 4, 255
and 3, 3, 4
and now we produce:
rlwinm 4, 3, 16, 24, 31
rlwimi 4, 3, 16, 8, 15
and, as a nice bonus, this fixes the FIXME in
test/CodeGen/PowerPC/rlwimi-and.ll.
This commit does not include instruction-selection for i64 operations, those
will come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224318 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224294 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: x86 allows either ordering for the LOCK and DATA16 prefixes, but using GCC+GAS leads to different code generation than using LLVM. This change matches the order that GAS emits the x86 prefixes when a semicolon isn't used in inline assembly (see tc-i386.c comment before define LOCK_PREFIX), and helps simplify tooling that operates on the instruction's byte sequence (such as NaCl's validator). This change shouldn't have any performance impact.
Test Plan: ninja check
Reviewers: craig.topper, jvoung
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6630
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224283 91177308-0d34-0410-b5e6-96231b3b80d8
Add in definedness checks for shift operators, null checks when
pointers are assumed by the code to be non-null, and explicit
unreachables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224255 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the various "rm" instruction variants into the list of instructions that have a partial register update. Also adds all variants of SQRTSD that were missing in the original list.
Differential Revision: http://reviews.llvm.org/D6620
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224246 91177308-0d34-0410-b5e6-96231b3b80d8
PPCTargetLowering::DAGCombineExtBoolTrunc contains logic to remove unwanted
truncations and extensions when dealing with nodes of the form:
zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...)
There was a FIXME in the implementation (now removed) regarding the fact that
the function would abort the transformations if any of the non-output operands
of a SELECT or SELECT_CC node would need to be promoted (because they were
also output operands, for example). As a result, we continued to generate
unnecessary zero-extends for code such as this:
unsigned foo(unsigned a, unsigned b) {
return (a <= b) ? a : b;
}
which would produce:
cmplw 0, 3, 4
isel 3, 4, 3, 1
rldicl 3, 3, 0, 32
blr
and now we produce:
cmplw 0, 3, 4
isel 3, 4, 3, 1
blr
which is better in the obvious way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224213 91177308-0d34-0410-b5e6-96231b3b80d8
r223862 tried to also combine base-updating load/stores.
r224198 reverted it, as "it created a regression on the test-suite
on test MultiSource/Benchmarks/Ptrdist/anagram by scrambling the order
in which the words are shown."
Reapply, with a fix to ignore non-normal load/stores.
Truncstores are handled elsewhere (you can actually write a pattern for
those, whereas for postinc loads you can't, since they return two values),
but it should be possible to also combine extloads base updates, by checking
that the memory (rather than result) type is of the same size as the addend.
Original commit message:
We used to only combine intrinsics, and turn them into VLD1_UPD/VST1_UPD
when the base pointer is incremented after the load/store.
We can do the same thing for generic load/stores.
Note that we can only combine the first load/store+adds pair in
a sequence (as might be generated for a v16f32 load for instance),
because other combines turn the base pointer addition chain (each
computing the address of the next load, from the address of the last
load) into independent additions (common base pointer + this load's
offset).
Differential Revision: http://reviews.llvm.org/D6585
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224203 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r223862, as it created a regression on the test-suite
on test MultiSource/Benchmarks/Ptrdist/anagram by scrambling the order
in which the words are shown. We'll investigate the issue and re-apply
when safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224198 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC64, we end up with lots of i32 -> i64 zero extensions, not only from all
of the usual places, but also from the ABI, which specifies that values passed
are zero extended. Almost all 32-bit PPC instructions in PPC64 mode are defined
to do *something* to the higher-order bits, and for some instructions, that
action clears those bits (thus providing a zero-extended result). This is
especially common after rotate-and-mask instructions. Adding an additional
instruction to zero-extend the results of these instructions is unnecessary.
This PPCISelDAGToDAG peephole optimization examines these zero-extensions, and
looks back through their operands to see if all instructions will implicitly
zero extend their results. If so, we convert these instructions to their 64-bit
variants (which is an internal change only, the actual encoding of these
instructions is the same as the original 32-bit ones) and remove the
unnecessary zero-extension (changing where the INSERT_SUBREG instructions are
to make everything internally consistent).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This commit enables the MIPS-III target and adds support for code
generation of SELECT nodes. We have to use pseudo-instructions with
custom inserters for these nodes as MIPS-III CPUs do not have
conditional-move instructions.
Depends on D6212
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6464
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224128 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For Mips targets that do not have conditional-move instructions, ie. targets
before MIPS32 and MIPS-IV, we have to insert a diamond control-flow
pattern in order to support SELECT nodes. In order to do that, we add
pseudo-instructions with a custom inserter that emits the necessary
control-flow that selects the correct value.
With this patch we add complete support for code generation of Mips-II targets
based on the LLVM test-suite.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6212
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224124 91177308-0d34-0410-b5e6-96231b3b80d8
The __fp16 type is unconditionally exposed. Since -mfp16-format is not yet
supported, there is not a user switch to change this behaviour. This build
attribute should capture the default behaviour of the compiler, which is to
expose the IEEE 754 version of __fp16.
When -mfp16-format is emitted, that will be the way to control the value of
this build attribute.
Change-Id: I8a46641ff0fd2ef8ad0af5f482a6d1af2ac3f6b0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224115 91177308-0d34-0410-b5e6-96231b3b80d8
The returned operand needs to be permuted for the unordered
compares. Also fix incorrectly producing fmin_legacy / fmax_legacy
for f64, which don't exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224094 91177308-0d34-0410-b5e6-96231b3b80d8
This is nice for the instruction patterns, but it complicates
min / max matching. The select doesn't have the correct type and would
require looking through the bitcasts for the real float operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224092 91177308-0d34-0410-b5e6-96231b3b80d8
Add an option to disable optimization to shrink truncated larger type
loads to smaller type loads. On SI this prevents using scalar load
instructions in some cases, since there are no scalar extloads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224084 91177308-0d34-0410-b5e6-96231b3b80d8
This was checking if pseudo-operands like the source
modifiers were using the constant bus, which happens to work
because the values these all can be happen to be valid inline
immediates.
This fixes a later commit which starts checking the register class
of the operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224078 91177308-0d34-0410-b5e6-96231b3b80d8
If we have an add (or an or that is really an add), where one operand is a
FrameIndex and the other operand is a small constant, we can combine the
lowering of the FrameIndex (which is lowered as an add of the FI and a zero
offset) with the constant operand.
Amusingly, this is an old potential improvement entry from
lib/Target/PowerPC/README.txt which had never been resolved. In short, we used
to lower:
%X = alloca { i32, i32 }
%Y = getelementptr {i32,i32}* %X, i32 0, i32 1
ret i32* %Y
as:
addi 3, 1, -8
ori 3, 3, 4
blr
and now we produce:
addi 3, 1, -4
blr
which is much more sensible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224071 91177308-0d34-0410-b5e6-96231b3b80d8
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
This is the 2nd attempt at this after realizing that PassManager::add() may
actually delete the pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224059 91177308-0d34-0410-b5e6-96231b3b80d8
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224042 91177308-0d34-0410-b5e6-96231b3b80d8
The distinction is mostly useful in the front-end. By the time we get here,
there are very few situations where we actually want different behaviour for
Darwin and IOS (in fact Darwin mostly just exists in a few tests). So this
should reduce any surprising weirdness for anyone using it.
No functional change on anything anyone actually cares about.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224035 91177308-0d34-0410-b5e6-96231b3b80d8
PPCISelDAGToDAG contained existing code to lower i32 sdiv by a power-of-2 using
srawi/addze, but did not implement the i64 case. DAGCombine now contains a
callback specifically designed for this purpose (BuildSDIVPow2), and part of
the logic has been moved to an implementation of that callback. Doing this
lowering using BuildSDIVPow2 likely does not matter, compared to handling
everything in PPCISelDAGToDAG, for the positive divisor case, but the negative
divisor case, which generates an additional negation, can potentially benefit
from additional folding from DAGCombine. Now, both the i32 and the i64 cases
have been implemented.
Fixes PR20732.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224033 91177308-0d34-0410-b5e6-96231b3b80d8
We can't reach those from zext, but other parts of the backend (the shuffle
lowering) generate 256-bit VZEXT nodes.
Fixes PR21876.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223996 91177308-0d34-0410-b5e6-96231b3b80d8
Quite a major error here: the expansions for the Pseudos with and without
folded load were mixed up. Fortunately it only affects ARM-mode, when not using
movw/movt, on Darwin. I'm guessing no-one actually uses that combination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223986 91177308-0d34-0410-b5e6-96231b3b80d8
