During instruction selection, we rewrite the destination register
class for MIMG instructions based on their writemasks. This creates
machine verifier errors since the new register class does not match
the register class in the MIMG instruction definition.
We can avoid this by defining different MIMG instructions for each
possible destination type and then switching to the correct instruction
when we change the register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192365 91177308-0d34-0410-b5e6-96231b3b80d8
This prevents the machine verifier from complaining about uses of
an undefined physical register.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192364 91177308-0d34-0410-b5e6-96231b3b80d8
StructurizeCFG pass allows to make complex cfg reducible ; it allows a lot of
shader from shadertoy (which exhibits complex control flow constructs) to works
correctly with respect to CFG handling (and allow us to detect potential bug in
other part of the backend).
We provide a cmd line argument to disable the pass for debug purpose.
Patch by: Vincent Lejeune
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192363 91177308-0d34-0410-b5e6-96231b3b80d8
When we had a sequence like:
s1 = VLDRS [r0, 1], Q0<imp-def>
s3 = VLDRS [r0, 2], Q0<imp-use,kill>, Q0<imp-def>
s0 = VLDRS [r0, 0], Q0<imp-use,kill>, Q0<imp-def>
s2 = VLDRS [r0, 4], Q0<imp-use,kill>, Q0<imp-def>
we were gathering the {s0, s1} loads below the s3 load. This is fine,
but confused the verifier since now the s3 load had Q0<imp-use> with
no definition above it.
This should mark such uses <undef> as well. The liveness structure at
the beginning and end of the block is unaffected, and the true sN
definitions should prevent any dodgy reorderings being introduced
elsewhere.
rdar://problem/15124449
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192344 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r192316. The original change introduced circular
dependencies between libTarget and backends. That would broke a build unless
link everything into one big binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192329 91177308-0d34-0410-b5e6-96231b3b80d8
Making them proper functions defined in the (shared)lib instead of
static inlines defined in the header files makes it possible to
actually distribute a binary compiled against the shared library
without having to worry about getting undefined symbol errors when
calling e.g LLVMInitializeAllTargetInfos because the shared library on
the other system was compiled with different targets.
Differential Revision: http://llvm-reviews.chandlerc.com/D1714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192316 91177308-0d34-0410-b5e6-96231b3b80d8
Substantial SelectionDAG scheduling is going away soon, and is
interfering with Hao's attempts to implement LDn/STn instructions, so
I say we make the leap first.
There were a few reorderings (inevitably) which broke some tests. I
tried to replace them with CHECK-DAG variants mostly, but some too
complex for that to be useful and I just reordered them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192282 91177308-0d34-0410-b5e6-96231b3b80d8
This was only working because AVX had cheaper rules in all cases.
I'm sure there are other places in this file where predicates are missing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192276 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16 will try and create a stub for it and this will
result in a link error because that function does not exist in libc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192223 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes an old FIXME by creating a MCTargetStreamer interface
and moving the target specific functions for ARM, Mips and PPC to it.
The ARM streamer is still declared in a common place because it is
used from lib/CodeGen/ARMException.cpp, but the Mips and PPC are
completely hidden in the corresponding Target directories.
I will send an email to llvmdev with instructions on how to use this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192181 91177308-0d34-0410-b5e6-96231b3b80d8
No new testcases. However, this patch makes all supported JIT testcases in
test/ExecutionEngine pass on Sparc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192176 91177308-0d34-0410-b5e6-96231b3b80d8
from struct byval to registers.
We used to pass 0 which means the alignment of PtrVT. Even when the alignment
of the struct is smaller than 4, the LOADs would have alignment of 4, and
further optimizations could combine the LOADs into a ldm, which would
cause crash.
The fix is to pass the alignment of the struct byval.
rdar://problem/15144402
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192126 91177308-0d34-0410-b5e6-96231b3b80d8
accumulator instead of its sub-registers, $hi and $lo.
We need this change to prevent a mflo following a mtlo from reading an
unpredictable/undefined value, as shown in the following example:
mult $6, $7 // result of $6 * $7 is written to $lo and $hi.
mflo $2 // read lower 32-bit result from $lo.
mtlo $4 // write to $lo. the content of $hi becomes unpredictable.
mfhi $3 // read higher 32-bit from $hi, which has an unpredictable value.
I don't have a test case for this change that reliably reproduces the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192119 91177308-0d34-0410-b5e6-96231b3b80d8
The hint instructions ("nop", "yield", etc) are mostly Thumb2-only, but have
been ported across to the v6M architecture. Fortunately, v6M seems to sit
nicely between v6 (thumb-1 only) and v6T2, so we can add a feature for it
fairly easily.
rdar://problem/15144406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192097 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the instruction to be encoded using the 2-byte VEX form instead of the 3-byte VEX form. The GNU assembler has similar behavior and instruction selection already does this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192088 91177308-0d34-0410-b5e6-96231b3b80d8
Regalloc can emit unaligned spills nowadays, but we can't fold the
spills into SSE ops if we can't guarantee alignment. PR12250.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192064 91177308-0d34-0410-b5e6-96231b3b80d8
This is required because i64 is a legal type but addxcc/subxcc reads icc carry bit, which are 32 bit conditional codes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192054 91177308-0d34-0410-b5e6-96231b3b80d8
When MC was first added, targets could use hasRawTextSupport to keep features
working before they were added to the MC interface.
The design goal of MC is to provide an uniform api for printing assembly and
object files. Short of relaxations and other corner cases, a object file is
just another representation of the assembly.
It was never the intention that targets would keep doing things like
if (hasRawTextSupport())
Set flags in one way.
else
Set flags in another way.
When they do that they create two code paths and the object file is no longer
just another representation of the assembly. This also then requires testing
with llc -filetype=obj, which is extremelly brittle.
This patch removes some of these hacks by replacing them with smaller ones.
The ARM flag setting is trivial, so I just moved it to the constructor. For
Mips, the patch adds two temporary hack directives that allow the assembly
to represent the same things as the object file was already able to.
The hope is that the mips developers will replace the hack directives with
the same ones that gas uses and drop the -print-hack-directives flag.
I will also try to implement a target streamer interface, so that we can
move this out of the common code.
In summary, for any new work, two rules of the thumb are
* Don't use "llc -filetype=obj" in tests.
* Don't add calls to hasRawTextSupport.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192035 91177308-0d34-0410-b5e6-96231b3b80d8
This patch handles LLVM standalone assembler (llvm-mc) ELF flag setting based on input file
directive processing.
Mips assembly requires processing inline directives that directly and
indirectly affect the output ELF header flags. This patch handles one
".abicalls".
To process these directives we are following the model the code generator
uses by storing state in a container as we go through processing and when
we detect the end of input file processing, AsmParser is notified and we
update the ELF header flags through a MipsELFStreamer method with a call from
MCTargetAsmParser::emitEndOfAsmFile(MCStreamer &OutStreamer).
This patch will allow other targets the same functionality.
Jack
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191982 91177308-0d34-0410-b5e6-96231b3b80d8
optimizeSelect folds (predicated) copy instructions, it must not ignore
the original register class of the operand when replacing the register
with the copies dest register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191963 91177308-0d34-0410-b5e6-96231b3b80d8
The jump doesn't really kill the registers, the following call does but
we never get back anyway.
This avoids some verify-machineinstrs problems when TAILJUMPs are
if-converted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191962 91177308-0d34-0410-b5e6-96231b3b80d8
Copy over the whole register machine operand instead of creating a new one
with an incomplete set of flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191961 91177308-0d34-0410-b5e6-96231b3b80d8
There are no corresponding patterns for small immediates because they would
prevent the use of fused compare-and-branch instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191775 91177308-0d34-0410-b5e6-96231b3b80d8
This function-attribute modifies the callee-saved register list and function
epilogue (specifically the return instruction) so that a routine is suitable
for use as an interrupt-handler of the specified type without disrupting
user-mode applications.
rdar://problem/14207019
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191766 91177308-0d34-0410-b5e6-96231b3b80d8
Floats are stored in the high 32 bits of an FPR, and the only GPR<->FPR
transfers are full-register transfers. This patch optimizes GPR<->FPR
float transfers when the high word of a GPR is directly accessible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191764 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to low words, we can use the shorter LLIHL and LLIHH if it turns
out that the other half of the GR64 isn't live.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191750 91177308-0d34-0410-b5e6-96231b3b80d8
This just adds the basics necessary for allocating the upper words to
virtual registers (move, load and store). The move support is parameterised
in a way that makes it easy to handle zero extensions, but the associated
zero-extend patterns are added by a later patch.
The easiest way of testing this seemed to be add a new "h" register
constraint for high words. I don't expect the constraint to be useful
in real inline asms, but it should work, so I didn't try to hide it
behind an option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191739 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed as r191661, but reverted because it changed the matching
order of comparisons on some hosts. That should have been fixed by r191735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191738 91177308-0d34-0410-b5e6-96231b3b80d8
on ADD16rr opcodes, if src1 != src, since that would cause
convertToThreeAddress to try to create a virtual register. This is not
permitted after register allocation, which is when the X86FixupLEAs pass
runs.
This patch fixes PR16785.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191711 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds Direct Object Emission support for I8 instructions: andi.b, bmnzi.b, bmzi.b, bseli.b, nori.b, ori.b, shf.{b,h,w} and xori.b.
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191688 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds Direct Object Emission support for 2R instructions: nloc.{b,h,w}, nlzc.{b,h,w}, pcnt.{b,w,d}.
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191685 91177308-0d34-0410-b5e6-96231b3b80d8
For targets that have instruction itineraries this means no change. Targets
that move over to the new schedule model will use be able the new schedule
module for instruction latencies in the if-converter (the logic is such that if
there is no itineary we will use the new sched model for the latencies).
Before, we queried "TTI->getInstructionLatency()" for the instruction latency
and the extra prediction cost. Now, we query the TargetSchedule abstraction for
the instruction latency and TargetInstrInfo for the extra predictation cost. The
TargetSchedule abstraction will internally call "TTI->getInstructionLatency" if
an itinerary exists, otherwise it will use the new schedule model.
ATTENTION: Out of tree targets!
(I will also send out an email later to LLVMDev)
This means, if your target implements
unsigned getInstrLatency(const InstrItineraryData *ItinData,
const MachineInstr *MI,
unsigned *PredCost);
and returns a value for "PredCost", you now also need to implement
unsigned getPredictationCost(const MachineInstr *MI);
(if your target uses the IfConversion.cpp pass)
radar://15077010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191671 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason, adding definitions for these load and store
instructions changed whether some of the build bots matched
comparisons as signed or unsigned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191663 91177308-0d34-0410-b5e6-96231b3b80d8
The only thing this does on its own is make the definitions of RISB[HL]G
a bit more precise. Those instructions are only used by the MC layer at
the moment, so no behavioral change is intended. The class is needed by
later patches though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191660 91177308-0d34-0410-b5e6-96231b3b80d8
Use subreg_hNN and subreg_lNN for the high and low NN bits of a register.
List the low registers first, so that subreg_l32 also means the low 32
bits of a 128-bit register.
Floats are stored in the upper 32 bits of a 64-bit register, so they
should use subreg_h32 rather than subreg_l32.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191659 91177308-0d34-0410-b5e6-96231b3b80d8
I'm about to add support for high-word operations, so it seemed better
for the low-word registers to have names like R0L rather than R0W.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191655 91177308-0d34-0410-b5e6-96231b3b80d8
Add VEX_LIG to scalar FMA4 instructions.
Use VEX_LIG in some of the inheriting checks in disassembler table generator.
Make use of VEX_L_W, VEX_L_W_XS, VEX_L_W_XD contexts.
Don't let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from their non-L forms unless VEX_LIG is set.
Let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from all of their non-L or non-W cases.
Increase ranking on VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE so they get chosen over non-L/non-W forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191649 91177308-0d34-0410-b5e6-96231b3b80d8
We were completely ignoring the unorder/ordered attributes of condition
codes and also incorrectly lowering seto and setuo.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191603 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG will now attempt to inverse an illegal conditon in order to
find a legal one and if that doesn't work, it will attempt to swap the
operands using the inverted condition.
There are no new test cases for this, but a nubmer of the existing R600
tests hit this path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191602 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for targets like R600, which only support GT, GE, NE, and EQ
condition codes as it removes the need to handle unsupported condition
codes in target specific code.
There are no tests with this commit, but R600 has been updated to take
advantage of this new feature, so its existing selectcc tests are now
testing the swapped operands path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191601 91177308-0d34-0410-b5e6-96231b3b80d8
of loops.
Previously, two consecutive calls to function "func" would result in the
following sequence of instructions:
1. load $16, %got(func)($gp) // load address of lazy-binding stub.
2. move $25, $16
3. jalr $25 // jump to lazy-binding stub.
4. nop
5. move $25, $16
6. jalr $25 // jump to lazy-binding stub again.
With this patch, the second call directly jumps to func's address, bypassing
the lazy-binding resolution routine:
1. load $25, %got(func)($gp) // load address of lazy-binding stub.
2. jalr $25 // jump to lazy-binding stub.
3. nop
4. load $25, %got(func)($gp) // load resolved address of func.
5. jalr $25 // directly jump to func.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191591 91177308-0d34-0410-b5e6-96231b3b80d8
The backend tries to use block operations like MVC, NC, OC and XC for
simple scalar operations. For correctness reasons, it rejects any case
in which the regions might partially overlap. However, for performance
reasons, it should also reject cases where the regions might be equal,
since the instruction might then not use the fast path.
This fixes a performance regression seen in bzip2. We may want to limit
the optimisation even more in future, or even remove it entirely, but I'll
try with this for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191525 91177308-0d34-0410-b5e6-96231b3b80d8
The backend previously folded offsets into PC-relative addresses
whereever possible. That's the right thing to do when the address
can be used directly in a PC-relative memory reference (using things
like LRL). But if we have a register-based memory reference and need
to load the PC-relative address separately, it's better to use an anchor
point that could be shared with other accesses to the same area of the
variable.
Fixes a FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191524 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is lowered into an equivalent INSERT_VECTOR_ELT which is
further lowered into a sequence of insert.w's on MIPS32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191521 91177308-0d34-0410-b5e6-96231b3b80d8
As specified in A8.8.72/A8.8.73/A8.8.74 in the ARM ARM, all variants of the ARM LDRD instruction have the following two constraints:
LDRD<c> <Rt>, <Rt2>, ...
(a) Rt must be even-numbered and not r14
(b) Rt2 must be R(t+1)
If those two constraints are not met the result of executing the instruction will be unpredictable.
Constraint (b) was already enforced, this commit adds support for constraint (a).
Fixes rdar://14479793.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191520 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is lowered into an equivalent BUILD_VECTOR which is further
lowered into a sequence of insert.w's on MIPS32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191519 91177308-0d34-0410-b5e6-96231b3b80d8
For v4f32 and v2f64, INSERT_VECTOR_ELT is matched by a pseudo-insn which is
later expanded to appropriate insve.[wd] insns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191515 91177308-0d34-0410-b5e6-96231b3b80d8
For v4f32 and v2f64, EXTRACT_VECTOR_ELT is matched by a pseudo-insn which may
be expanded to subregister copies and/or instructions as appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191514 91177308-0d34-0410-b5e6-96231b3b80d8
This file contains notes about the instruction selection for MSA. For example,
it notes that ilvl.d is cannot be selected because ilvev.d covers the same
cases and is selected instead of ilvl.d.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191507 91177308-0d34-0410-b5e6-96231b3b80d8
LDRD<c> <Rt>, <Rt2>, <label>
LDRD<c> <Rt>, <Rt2>, [<Rn>{, #+/-<imm>}]
LDRD<c> <Rt>, <Rt2>, [<Rn>], #+/-<imm>
LDRD<c> <Rt>, <Rt2>, [<Rn>, #+/-<imm>]!
As specified in A8.8.72/A8.8.73 in the ARM ARM, the T1 encoding has a constraint which enforces that Rt != Rt2.
If this constraint is not met the result of executing the instruction will be unpredictable.
Fixes rdar://14479780.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191504 91177308-0d34-0410-b5e6-96231b3b80d8
lowerMSABinaryIntr, lowerMSABinaryImmIntr, lowerMSABranchIntr,
and lowerMSAUnaryIntr were trivially small functions. Inlined them into
their callers.
lowerMSASplat now takes its callers SDLoc instead of making a new one.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191503 91177308-0d34-0410-b5e6-96231b3b80d8
When generating code for shared libraries, even local calls may be
intercepted, so we need a nop after the call for the linker to fix up the
TOC. Test case adapted from the one provided in PR17354.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191440 91177308-0d34-0410-b5e6-96231b3b80d8
When asked to pad an irregular number of bytes, we should fill with
zeros. This is consistent with the behavior specified in the AIX
Assembler Language Reference as well as other LLVM and binutils
assemblers.
N.B. There is a small deviation from binutils' PPC assembler:
when handling pads which are greater than 4 bytes but not mod 4,
binutils will not emit any NOP sequences at all and only use zeros.
This may or may not be a bug but there is no excellent rationale as to
why that behavior is important to emulate. If that behavior is needed,
we can change writeNopData() to behave in the same way.
This fixes PR17352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191426 91177308-0d34-0410-b5e6-96231b3b80d8
Encodings were checked against the Power ISA documents and double
checked against binutils.
This fixes PR17350.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191419 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first set of instructions with a ".b" modifier thus we need to add the required code to disassemble a MSA128B register class.
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191415 91177308-0d34-0410-b5e6-96231b3b80d8
In more detail, this patch adds the ability to parse, encode and decode MSA registers ($w0-$w31). The format of 2RF instructions (MipsMSAInstrFormat.td) was updated so that we could attach a test case to this patch i.e., the test case parses, encodes and decodes 2 MSA instructions. Following patches will add the remainder of the instructions.
Note that DecodeMSA128BRegisterClass is missing from MipsDisassembler.td because it's not yet required at this stage and having it would cause a compiler warning (unused function).
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191412 91177308-0d34-0410-b5e6-96231b3b80d8
Generally, it is desirable to distribute (a + b) * c to a*c + b*c for
ARM with VMLx forwarding, where a, b and c are vectors.
However, for (a + b)*(a + b), distribution will result in one extra
instruction.
With distribution:
x = a + b (add)
y = a * x (mul)
z = y + b * y (mla)
Without distribution:
x = a + b (add)
z = x * x (mul)
This patch checks if a mul is a square of add/sub. If yes, skip
distribution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191410 91177308-0d34-0410-b5e6-96231b3b80d8
Ideally, the machinel model is added at the time the instructions are
defined. But many instructions in X86InstrSSE.td still need a model.
Without this workaround the scheduler asserts because x86 already has
itinerary classes for these instructions, indicating they should be
modeled by the scheduler. Since we use the new machine model for other
instructions, it expects a new machine model for these too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191391 91177308-0d34-0410-b5e6-96231b3b80d8
Another patch to avoid duplication of encoding information. Things like
NILF, NILL and NILH are used as both 32-bit and 64-bit instructions.
Here the 64-bit versions are defined as aliases of the 32-bit ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191369 91177308-0d34-0410-b5e6-96231b3b80d8
The binutils assembler supports a mode called DOLLAR_DOT which treats
the dollar sign token as a reference to the current program counter if
the dollar sign doesn't precede a constant or identifier.
This commit adds a new MCAsmInfo flag stating whether or not a given
target supports this interpretation of the dollar sign token; by
default, this flag is not enabled.
Further, enable this flag for PPC. The system assembler for AIX and
binutils both support using the dollar sign in this manner.
This fixes PR17353.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191368 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to r191364, but for calls. This patch also removes the shortening
of BRASL to BRAS within a TU. Doing that was a bit controversial internally,
since there's a strong expectation with the z assembler that WYWIWYG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191366 91177308-0d34-0410-b5e6-96231b3b80d8
Another patch to reduce the duplication of encoding information.
Rather than define separate patterns for truncating 64-bit stores,
use the 32-bit stores with a subreg. No behavioral changed intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191365 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first of a few patches to reduce the dupliation of encoding
information. The return instruction is a normal BR in which one of the
registers is fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191364 91177308-0d34-0410-b5e6-96231b3b80d8
When loading immediates into a GR32, the port prefered LHI, followed by
LLILH or LLILL, followed by IILF. LHI and IILF are natural 32-bit
operations, but LLILH and LLILL also clear the upper 32 bits of the register.
This was represented as taking a 32-bit subreg of a 64-bit assignment.
Using subregs for something as simple as a move immediate was probably
a bad idea. Also, I have patches to add support for the high-word facility,
and we don't want something like LLILH and LLILL to stop the high word of
the same GPR from being used.
This patch therefore uses LHI and IILF to begin with and adds a late
machine-specific pass to use LLILH and LLILL if the other half of the
register is not live. The high-word patches extend this behavior to
IIHF, LLIHL and LLIHH.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191363 91177308-0d34-0410-b5e6-96231b3b80d8
This is being disabled because it is no longer needed for
performance. It is only used by postRAscheduler which is also planned
for removal, and it is implemented with an out-dated view of register
liveness. It consideres aliases instead of register units, assumes
valid kill flags, and assumes implicit uses on partial register
defs. Kill flags and implicit operands are error prone and impossible
to verify. We should gradually eliminate dependence on them in the
postRA phases.
Targets that still benefit from this should move to the MI
scheduler. If that doesn't solve the problem, then we should add a
hook to regalloc to optimize reload placement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191348 91177308-0d34-0410-b5e6-96231b3b80d8
Most constant BUILD_VECTOR's are matched using ComplexPatterns which cover
bitcasted as well as normal vectors. However, it doesn't seem to be possible to
match ldi.[bhwd] in a type-agnostic manner (e.g. to support the widest range of
immediates, it should be possible to use ldi.b to load v2i64) using TableGen so
ldi.[bhwd] is matched using custom code in MipsSEISelDAGToDAG.cpp
This made the majority of the constant splat BUILD_VECTOR lowering redundant.
The only transformation remaining for constant splats is when an (up-to) 32-bit
constant splat is possible but the value does not fit into a 10-bit signed
integer. In this case, the BUILD_VECTOR is transformed into a bitcasted
BUILD_VECTOR so that fill.[bhw] can be used to splat the vector from a GPR32
register (which is initialized using the usual lui/addui sequence).
There are no additional tests since this is a re-implementation of previous
functionality. The change is intended to make it easier to implement some of
the upcoming instruction selection patches since they can rely on existing
support for BUILD_VECTOR's in the DAGCombiner.
compare_float.ll changed slightly because a BITCAST is no longer
introduced during legalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191299 91177308-0d34-0410-b5e6-96231b3b80d8
MIPS SelectionDAG changes:
* Added VCEQ, VCL[ET]_[SU] nodes to represent vector comparisons that produce a bitmask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191286 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure that the code that handles the constant addresses is run for the
GEPs. This just refactors that code and then calls it for the GEPs that are
collected during the iteration.
<rdar://problem/12445434>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191281 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191263 91177308-0d34-0410-b5e6-96231b3b80d8
The recursive nature of the address selection code can cause the stack to
explode if there is a long chain of GEPs. Convert the recursive bit into a
iterative method to avoid this.
<rdar://problem/12445434>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191252 91177308-0d34-0410-b5e6-96231b3b80d8
Changes to MIPS SelectionDAG:
* Added nodes VEXTRACT_[SZ]EXT_ELT to represent extract and extend in a single
operation and implemented the DAG combines necessary to fold sign/zero
extends into the extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191199 91177308-0d34-0410-b5e6-96231b3b80d8
An unrelated change crept in because 'svn revert' isn't recursive by default.
The unrelated changes have been reverted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191193 91177308-0d34-0410-b5e6-96231b3b80d8
Note: There's a later patch on my branch that re-implements this to select
build_vector without the custom SelectionDAG nodes. The future patch avoids
the constant-folding problems stemming from the custom node (i.e. it doesn't
need to re-implement all the DAG combines related to BUILD_VECTOR).
Changes to MIPS specific SelectionDAG nodes:
* Added VSPLAT
This is a special case of BUILD_VECTOR that covers the case the
BUILD_VECTOR is a splat operation.
* Added VSPLATD
This is a special case of VSPLAT that handles the cases when v2i64 is legal
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191191 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LLVM would crash when trying to come up with a relocation type for
assembly like:
movabsq $V@TPOFF, %rax
Instead, we say the relocation type is R_X86_64_TPOFF64.
Fixes PR17274.
Reviewers: dblaikie, nrieck, rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191163 91177308-0d34-0410-b5e6-96231b3b80d8
Pre-increment loads are microcoded on the A2, and the address increment occurs
only after the load completes. As a result, the latency of the GPR address
update is an additional 2 cycles on top of the load latency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191156 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX 256bit vectors are valid vectors and therefore the Type Legalizer doesn't
split the VSELECT and SETCC nodes. AVX only supports MIN/MAX on 128bit vectors
and this fix enables vector splitting for this special case in the X86 DAG
Combiner.
This fix is related to PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191131 91177308-0d34-0410-b5e6-96231b3b80d8
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask for the given target. This mask has usually
te same size as the VSELECT return type (except for Intel KNL). Now the type
legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191130 91177308-0d34-0410-b5e6-96231b3b80d8
The global registry is used to allow command line override of the
scheduler selection, but does not work well as the normal selection
API. For example, the same LLVM process should be able to target
multiple targets or subtargets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191071 91177308-0d34-0410-b5e6-96231b3b80d8