Thomas Harte
86239469e7
Allows SN76489 consumers to apply an additional divider that reduces computation.
2018-03-01 18:51:05 -05:00
Thomas Harte
7890506b16
Gives the SN76489 its proper dividers and personalities.
2018-02-28 22:36:03 -05:00
Thomas Harte
87760297fc
Fixes underpumping of SN76489.
...
Audio works now. Though I still need properly to confirm who owns dividers in practice. I think probably all division should be within the SN.
2018-02-27 22:59:29 -05:00
Thomas Harte
d4df101ab6
Makes a first attempt at implementing the SN76489.
2018-02-27 22:25:12 -05:00
Thomas Harte
0ad2676640
Adds a class for the SN76489 and wires it into the ColecoVision.
2018-02-26 22:04:34 -05:00
Thomas Harte
a074ee2071
Possibly fixes ColecoVision input mapping.
...
Also provides symbolic input from the Mac.
2018-02-25 22:47:47 -05:00
Thomas Harte
204d5cc964
Extends JoystickMachine protocol to cover ColecoVision use case.
...
Also thereby implements input on the ColecoVision, in theory at least. No input is being fed though, so...
2018-02-25 19:08:50 -05:00
Thomas Harte
23d15a4d6c
The ColecoVision now accepts and loads cartridges.
2018-02-24 18:26:44 -05:00
Thomas Harte
23c47e21de
Proceeds the ColecoVision to booting.
2018-02-24 18:14:38 -05:00
Thomas Harte
5530b96446
Wired up a class and analyser for a ColecoVision.
2018-02-23 22:47:15 -05:00
Thomas Harte
270723ae72
Forces the MSX's perform_machine_cycle into the Z80.
2018-02-19 19:54:42 -05:00
Thomas Harte
fc81bfa59b
Eliminates tape player call when tape is not playing.
2018-02-19 18:36:31 -05:00
Thomas Harte
3673cfe9be
Pulls method call for tape fast loading checks out of inner loop for the Vic, Electron and ZX80/81.
2018-02-19 16:57:24 -05:00
Thomas Harte
b0ab617393
Simplifies inner loop test for MSX fast loading.
2018-02-19 16:24:47 -05:00
Thomas Harte
7b420d56e3
Removed state mirroring in the machine-specific Mac UI classes.
2018-02-14 21:46:50 -05:00
Thomas Harte
ddf1bf3cbf
Reintroduces options selection for the Mac.
...
For everything except the Vic-20, anyway. That has a somewhat outdated notion of what an options panel should be, corresponding to the work yet to do on its analyser.
2018-02-12 21:46:21 -05:00
Thomas Harte
23105956d6
Fixes spurious unrecognised miss detection for the ASCII mappers.
2018-02-11 20:51:39 -05:00
Thomas Harte
f02989649c
Corrects effect of pc_is_outside_bios.
2018-02-11 20:32:45 -05:00
Thomas Harte
eb39617ad0
Allows cartridges to filter based on the actor talking to them; corrects outstanding_machines access error.
2018-02-10 17:11:16 -05:00
Thomas Harte
43b682a5af
Adds multiple target versions of all the DynamicMachine-vended types.
2018-02-09 16:31:05 -05:00
Thomas Harte
043fd5d404
Merge branch 'DynamicAnalysis' of github.com:TomHarte/CLK into DynamicAnalysis
2018-02-09 09:12:05 -05:00
Thomas Harte
d63a95983d
Adds a couple of hard-stop conditions to the MSX, and respect for hard stops.
2018-02-09 09:10:56 -05:00
Thomas Harte
4cf258f952
Parallelises MultiMachine running, and ensures errors propagate.
2018-02-08 20:33:57 -05:00
Thomas Harte
4e720d57b2
With debugging hooks still on display, makes first attempt at dynamic analysis.
2018-02-01 07:53:52 -05:00
Thomas Harte
c12aaea747
Attempts to get as far as running the MultiMachine.
...
In doing so, fixes the long-standing bug that machines that output audio but don't have a listener produce a divide by zero.
2018-01-30 22:23:06 -05:00
Thomas Harte
ca48497e87
Pulls DynamicMachine
out of MachineForTarget
and adds MultiConfigurationTarget
as a first multiplexer.
2018-01-29 21:49:49 -05:00
Thomas Harte
d493ea4bca
Introduces a multimachine to handle multi-target static analyser outputs.
...
Non-functional as of yet.
2018-01-28 22:22:21 -05:00
Thomas Harte
e025674eb2
The MSX analyser is now smart enough not to be definitive when it's uncertain.
...
The cartridge type has also migrated to being a property of the cartridge, prefiguring my intention to discard the static analyser union.
2018-01-25 22:16:46 -05:00
Thomas Harte
f2519f4fd7
Decided to focus on 'confidence' over 'probability'.
...
Besides anything else, it individualises the measure. E.g. two targets can each have a confidence of 0.8 without each giving the wrong answer about probability.
2018-01-25 19:02:16 -05:00
Thomas Harte
66faed4008
Gives MachineForTargets
complete responsibility for initial machine state.
2018-01-25 18:28:19 -05:00
Thomas Harte
11abc99ef8
Introduces the extra level of indirection necessary to make Analyser::Static::Target polymorphic.
2018-01-24 22:35:54 -05:00
Thomas Harte
21efb32b6f
Integrates the static and nascent dynamic analyser namespaces.
2018-01-24 21:48:44 -05:00
Thomas Harte
d360b2c62d
Standardises the static analyser on std::vector and slightly widens passageway to a machine.
...
The SDL target would now be fooled by a hypothetical multi-target, the Mac not yet.
2018-01-23 22:18:16 -05:00
Thomas Harte
6a112edc18
Corrects 16kb ASCII mapper.
...
Also increases hit position acceptance for the 8kb ASCII.
2018-01-22 22:13:16 -05:00
Thomas Harte
8fb4409ebb
Adds hasty attempt at dynamic analysis to the MSX ROM handlers.
...
Logging for now, for further experimentation.
2018-01-22 21:50:56 -05:00
Thomas Harte
765c0d4ff8
Allows the Electron to load 8kb ROMs.
2018-01-15 21:27:45 -05:00
Thomas Harte
a5ac8c824e
Removes logging and unnecessary get_drive_is_ready
.
2018-01-07 21:59:59 -05:00
Thomas Harte
8be6cb827b
Implements MSX interrupt/data request reading register.
...
The disk ROM now appears to accept on-disk bytes, but still announces an IO failure.
2018-01-07 20:28:34 -05:00
Thomas Harte
2f59226300
Fixes: DiskROM drive motor control, track_for_sectors' sides.
2018-01-07 20:02:40 -05:00
Thomas Harte
513c067f94
Makes an attempt to rope in the WD1770 for MSX disk ROM emulation.
2018-01-07 19:12:52 -05:00
Thomas Harte
655b971976
Establishes that there is such as a thing as a Konami SCC.
...
Creates one, ensures it appears in memory when intended to, lets it handle reads and writes. It currently does nothing.
2018-01-06 20:15:55 -05:00
Thomas Harte
185cd3c123
Expands and documents MSX::MemoryMap and MSX::ROMSlotHandler.
...
Hopefully to cover all intended use cases.
2018-01-06 15:51:29 -05:00
Thomas Harte
ed564cb810
Implements the main four cartridge banking schemes.
...
Slightly proof of concept for now.
2018-01-04 22:18:18 -05:00
Thomas Harte
c7f8f37822
Ensures typers terminate.
2017-12-30 13:46:30 -05:00
Thomas Harte
769d9dfbb9
Adds missing header.
2017-12-29 18:41:26 -05:00
Thomas Harte
6da8a3e24b
Causes the MSX to respond to the appropriate standard configuration options.
2017-12-29 18:36:42 -05:00
Thomas Harte
e349161a53
Rejigs the typing relationship so that use of a typer is not strongly implied by the interface.
...
Simultaneously implements typing on the MSX by direct insertion into the key buffer.
2017-12-29 18:30:46 -05:00
Thomas Harte
d5b1a9d918
Moves the typer functionality behind a functionality-based naming scheme, eliminates its C-style memory management.
2017-12-29 15:26:03 -05:00
Thomas Harte
76af0228dd
Corrects longstanding survival of camel case in the analyser's loadingCommand
.
2017-12-29 15:15:29 -05:00
Thomas Harte
5fd0a2b9ea
Attempts to pull reimplementations of TAPION and TAPIN better into line with originals.
...
Also improves whole flow of the fast tape hack that uses them.
2017-12-28 22:48:04 -05:00
Thomas Harte
11b73a9c0b
Adds preliminary, non-error-checking wiring in of MSX parser alternatives to TAPION and TAPIN.
...
As both a prototype of the pending fast tape loading, and to provide for exact behaviour comparison.
2017-12-26 22:31:34 -05:00
Thomas Harte
b9b107ee85
Switches KeyGrave and KeyQuote, correcting a disarrangement.
2017-12-20 21:16:54 -05:00
Thomas Harte
0bb24075b6
Immediate fixes: TSX is seemingly TZX 1.21; the tape motor control works the other way around.
...
Input is not yet being recognised.
2017-12-19 22:17:42 -05:00
Thomas Harte
db6d9b59d0
Attempts to implement TSX support for the MSX.
2017-12-19 21:53:04 -05:00
Thomas Harte
2d892da225
Introduces the MSX keyboard toggle sample source.
...
In support of which, it also introduces a means of sample source composition.
2017-12-19 21:08:10 -05:00
Thomas Harte
d36e9d0b0d
Reintroduces cstring.h to a few files that previously got it implicitly.
2017-12-18 21:47:30 -05:00
Thomas Harte
2dc1d4443e
Separates LowpassFilter and SampleSource.
2017-12-18 21:39:23 -05:00
Thomas Harte
f8a2459c91
Corrects two lingering adaptation errors in the Vic-20.
2017-12-17 21:43:08 -05:00
Thomas Harte
ac80d10cd8
Separates the component parts of running an audio stream: task deferral, filtering and generation.
...
Walking towards improving opportunities for composition.
2017-12-17 21:26:06 -05:00
Thomas Harte
7a52e7d6d2
Provides an empty value for the interrupt cycle.
2017-12-13 22:44:03 -05:00
Thomas Harte
4daea1121b
Gives up on C-BIOS for a while, to get to an acceptable merge point.
2017-12-12 21:19:33 -05:00
Thomas Harte
afcdd64d5e
Switches to a less easy-to-confuse storage arrangement for MSX memory slots.
2017-12-11 21:09:53 -05:00
Thomas Harte
ec266d6c8e
Ensures the AY stops listening to the bus after each read or write.
2017-12-04 19:18:54 -05:00
Thomas Harte
e3a5218e78
Fixes AY and random port input for the MSX.
2017-12-03 22:25:18 -05:00
Thomas Harte
3766bef962
Eliminates some redundant white space.
2017-12-03 14:52:42 -05:00
Thomas Harte
fe7fc6b22e
Enables AY output from the MSX.
2017-12-02 16:30:43 -05:00
Thomas Harte
7f8a13a409
Adds bare minimum to get accepted 16- and 32kb cartridges to start on the MSX.
2017-12-02 16:06:04 -05:00
Thomas Harte
5da9cb2957
Introduces most of a keyboard mapping for the MSX.
2017-11-30 19:27:53 -05:00
Thomas Harte
54c845b6e2
Adds just enough logic to make every host key look like '0' to the MSX.
2017-11-29 22:07:30 -05:00
Thomas Harte
f0f149c018
Simplified paging logic.
2017-11-29 20:49:02 -05:00
Thomas Harte
aa4eef41d8
Seeks to introduce MSX interrupts.
2017-11-29 20:31:55 -05:00
Thomas Harte
69ec8a362e
Makes an attempt to perform MSX memory paging.
2017-11-28 21:56:15 -05:00
Thomas Harte
d33612def5
Ensures the MSX provides a clock to the VDP.
2017-11-26 20:07:30 -05:00
Thomas Harte
9cb6ca3440
Adds elementary decoding of VDP accesses.
2017-11-26 20:01:11 -05:00
Thomas Harte
e957e40b14
Shifts 8255 logging up into its own port handler. That's probably fine for now.
2017-11-26 18:59:29 -05:00
Thomas Harte
7a8a43a96a
Adds just enough of the MSX memory map for the Z80 to appear to try to do useful things.
2017-11-26 18:34:40 -05:00
Thomas Harte
0eb5dd9688
Introduces the fundamentals of bus routing for the MSX.
2017-11-26 16:47:59 -05:00
Thomas Harte
a14b53a9ab
Adds a TMS9918 skeleton plus enough in the MSX to get to a blank screen in SDL/kiosk mode.
2017-11-26 13:28:26 -05:00
Thomas Harte
576d554a2c
Expands upon the MSX skeleton.
2017-11-25 13:33:51 -05:00
Thomas Harte
68a2895753
Adds enough static analyser to get to the MSX itself as the point of failure in SDL/kiosk mode.
2017-11-25 13:18:24 -05:00
Thomas Harte
f90b3f06aa
Merge branch 'master' into MSX
2017-11-25 08:19:24 -05:00
Thomas Harte
ee9f89ccb5
Simplifies CPC ROM input mechanism.
2017-11-25 08:18:01 -05:00
Thomas Harte
a46a37fba9
Ensures all vectors loaded from disk are the expected size.
2017-11-24 22:22:32 -05:00
Thomas Harte
324b57c054
Adds inclusion of the 3/4 of the MSX's support chips that are currently implemented.
2017-11-24 22:05:50 -05:00
Thomas Harte
ae50ca9ab2
Moves the MSX class to the appropriate place and gives it a Z80.
2017-11-24 21:59:54 -05:00
Thomas Harte
6e4bde00d3
Merge branch 'master' into MSX
2017-11-24 21:50:38 -05:00
Thomas Harte
221c05ca76
Adapts the Mac port to use a Machine::DynamicMachine, thereby eliminating plenty of duplication.
2017-11-24 21:36:22 -05:00
Thomas Harte
ff21ff90eb
Introduces MSX ROMs and an MSX class.
2017-11-24 20:43:26 -05:00
Thomas Harte
c83b3cefbc
Eliminates the generalised special case selectors and ROM suppliers from the CPC, Vic-20, Electron and ZX80/81.
2017-11-24 17:55:28 -05:00
Thomas Harte
a8ac51da73
Eliminates the Oric's non-reflective inputs for selections, and the Oric-specific ROM setter.
2017-11-24 16:59:00 -05:00
Thomas Harte
d6192b8c58
Ensures Oric video output starts up and changes validly.
2017-11-23 16:19:41 -05:00
Thomas Harte
c7dd6247f0
Corrects Electron Mode 3 timing.
2017-11-23 16:06:05 -05:00
Thomas Harte
3365ff0200
Adds type recipient as a dynamic type, and accepts paste and fullscreen toggle in SDL.
2017-11-21 21:44:29 -05:00
Thomas Harte
c6306db47c
Ensures the 6560 is fully initialised by setup_output
.
2017-11-21 21:24:06 -05:00
Thomas Harte
7b25b03cd5
Formally standardises machine options and introduces a --help option for the SDL target.
2017-11-20 21:55:32 -05:00
Thomas Harte
90d33949f9
Adds a mapping of backspace for the Electron.
2017-11-18 20:02:04 -05:00
Thomas Harte
82ad0354c4
Adds configuration options to the Vic-20, Oric and ZX80/81.
2017-11-18 19:48:10 -05:00
Thomas Harte
de9db724a7
Introduces Configurable::Device
and implements it for the Electron.
...
Configurable::Device covers devices that have user-facing configuration options, listing them and accepting them.
2017-11-17 23:02:00 -05:00
Thomas Harte
c827d14d97
Corrects various GCC warnings across the 6560, CPC, TIA, Oric video and elsewhere.
2017-11-12 17:17:27 -05:00
Thomas Harte
5408efe9b5
Flags obvious default options within the 6560, Vic-20 and DynamicMachine.
2017-11-12 16:41:09 -05:00
Thomas Harte
198d0fd1de
Makes it obvious to GCC that a return result is always supplied.
2017-11-12 16:37:18 -05:00
Thomas Harte
c1eab8d5f3
Corrects a pragma mark that escaped detection through typo.
2017-11-12 16:11:24 -05:00
Thomas Harte
5aef81cf24
Commutes cross-platform #pragma mark
s to //MARK:
s.
2017-11-12 15:59:11 -05:00
Thomas Harte
2e15fab651
Doubles down on <cX> over <X.h> for C includes, and usage of the namespace for those types and functions.
2017-11-11 15:28:40 -05:00
Thomas Harte
792cbb1536
Resolvws out-of-order initialisation within the C1540.
2017-11-11 12:35:51 -05:00
Thomas Harte
916eb96b47
Makes buffer size restriction explicit in the Vic-20.
2017-11-10 22:59:11 -05:00
Thomas Harte
4add2c1051
Corrects order-of-initialisation errors in the TIA.
2017-11-10 22:57:43 -05:00
Thomas Harte
cb0f58ab7a
Corrects order-of-initialisation errors in the CPC (again), TextureBuilder, TextureTarget, Z80, MFM parser and binary tape player.
2017-11-10 22:57:03 -05:00
Thomas Harte
d9e56711ce
Corrects order-of-initialisation errors in the Amstrad CPC, Vic-20, Oric, Commodore File, MFM disk controller, UEF and Commodore tape parser.
2017-11-10 22:47:10 -05:00
Thomas Harte
d60692b6fd
Corrects order of initialisation for the Typer and Oric video.
2017-11-10 22:35:05 -05:00
Thomas Harte
5b6ea35d96
Corrects initialisation ordering for the ZX80/81, C1540 and AY-3-8910.
2017-11-10 22:31:27 -05:00
Thomas Harte
4cbc87a17d
Corrects out-of-order initialisations for the 1770, Atari 2600 joystick, Pitfall II bus extender, Microdisc and 6502.
2017-11-10 22:20:44 -05:00
Thomas Harte
46e7c199b2
Corrects improper initialisation order of the Commodore .tap and CRTMachine::Machine.
2017-11-10 22:08:40 -05:00
Thomas Harte
a825da3715
Reinstates missing include file.
2017-11-10 22:02:02 -05:00
Thomas Harte
fabaf4e607
Adds missing include files, corrects bad include paths and eliminates the Clang-specific __undefined
.
2017-11-10 21:56:53 -05:00
Thomas Harte
f7f2736d4d
Corrects missing includes in the SerialBus, Electron Video and Typer.
2017-11-10 20:37:18 -05:00
Thomas Harte
cb015c83e1
Eliminated C99-style struct initialisations.
2017-11-10 19:14:19 -05:00
Thomas Harte
2203499215
Enables -Wreorder and corrects a few of the more trivial fixes thereby suggested.
2017-11-09 22:14:22 -05:00
Thomas Harte
c0055a5a5f
Further builds up SConstruct, correcting many missed imports and a couple of improper uses of C99 in C++ code.
2017-11-09 22:04:49 -05:00
Thomas Harte
6e1d69581c
Eliminates a variety of end-of-line spaces.
2017-11-07 22:54:22 -05:00
Thomas Harte
f95515ae81
Eliminates a large number of instance of end-of-line tabs.
2017-11-07 22:51:06 -05:00
Thomas Harte
ddcdd07dd0
Modifies the Vic-20 and C1540 to bring them into the realm of self-ROM fetching.
...
Hence enables Vic-20 support within kiosk mode as currently drafted.
2017-11-07 21:19:51 -05:00
Thomas Harte
35da3edf60
Implements install_roms on the Electron, Oric and ZX80/81.
2017-11-06 22:14:15 -05:00
Thomas Harte
0da78065ce
Eliminates some dangling cases of undefined initial state in the TIA.
2017-11-06 22:12:39 -05:00
Thomas Harte
0116d7f071
Added a platform-neutral route for feeding ROMs to machines, in a platform-dependant fashion; implemented for the CPC.
2017-11-05 20:12:01 -05:00
Thomas Harte
1e1efcdcb8
Pushes far enough along the path of having the SDL version do work that it becomes obvious I've never figured out the correct course of action if there is no sound output.
2017-11-05 12:49:28 -05:00
Thomas Harte
218b976dbc
Adds through route for setting a texture bookender, and exploits it from the Electron.
2017-10-23 18:35:37 -04:00
Thomas Harte
c13f8e5390
Corrects a couple of cast conversion errors.
2017-10-21 22:42:19 -04:00
Thomas Harte
ad9df4bb90
Commutes uint8_t *
, uint16_t *
, uint32_t *
, size_t
, off_t
and long
to functional-style casts.
2017-10-21 22:30:15 -04:00
Thomas Harte
e983854e71
Converts all uint8_t
and uint16_t
casts to the functional style.
2017-10-21 21:50:53 -04:00
Thomas Harte
ec999446e8
Commutes int
and unsigned
casts to the functional style.
2017-10-21 21:00:40 -04:00
Thomas Harte
5e3e91373a
Switches all unsigned int
and double
casts to functional style.
2017-10-21 19:49:04 -04:00
Thomas Harte
9e0907ee76
Completes clean-up of post-formalisation per-machine keyboard code.
...
At least for now. Standardising on how column + row is encoded might be helpful.
2017-10-21 10:52:35 -04:00
Thomas Harte
9ad4025138
Relocates things that were in Machines/ for machine usage.
...
Leaving only those things intended to be visible interface.
2017-10-21 10:30:02 -04:00
Thomas Harte
405f58d6a3
Corrects write guard names.
2017-10-21 10:21:40 -04:00
Thomas Harte
b2c1b83fcd
Consolidates Vic-20 keyboard code.
2017-10-19 22:27:30 -04:00
Thomas Harte
1825af0dd3
Eliminates dead code in the Vic-20 and Inputs::Joystick.
2017-10-19 22:15:21 -04:00
Thomas Harte
c2f6799f0c
Implements Vic-20 restore key.
2017-10-19 22:02:34 -04:00
Thomas Harte
5c141af734
Prevents undefined behaviour from the CPC's timer.
2017-10-17 22:40:32 -04:00
Thomas Harte
da580e4186
Merge branch 'master' into UniversalInput
2017-10-17 22:36:22 -04:00
Thomas Harte
ce78d9d12c
Introduces buffer alignment when writing to textures.
...
To avoid cross-boundary writes and hopefully to eke out a little better performance.
2017-10-17 22:09:48 -04:00
Thomas Harte
edbc60a3fb
Various undefined behaviour fixes.
...
Primarily around uninitialised variables, but also with an attempted use of a negative pointer.
2017-10-17 21:29:19 -04:00
Thomas Harte
0c2dd62328
Various undefined behaviour fixes.
...
Primarily around uninitialised variables, but also with an attempted use of a negative pointer.
2017-10-17 20:50:46 -04:00
Thomas Harte
18798c9886
Corrects joystick memory leaks.
2017-10-15 20:49:47 -04:00
Thomas Harte
7aaf27389c
Commutes the Atari 2600 to the JoystickMachine interface.
2017-10-15 20:44:59 -04:00
Thomas Harte
ee179aa7bd
Introduces a joystick analogue to the shared keyboard interface, and implements it for the Vic-20.
2017-10-14 22:36:31 -04:00
Thomas Harte
3a05ce36de
Adds a reference to the calling keyboard in reset_all_keys
.
2017-10-14 22:07:11 -04:00
Thomas Harte
4f289ab10b
Corrects some deficiencies in Vic-20 keyboard mapping.
...
... albeit without yet being clear on the wiring behind restore.
2017-10-12 22:33:00 -04:00
Thomas Harte
78ee46270b
Transfers possession of keyboard mappings from the Mac side over to individual machines.
...
Specifically by establishing an intermediate representation of a useful mix between the American and British IBM and Mac keyboard layouts, and routing through that.
2017-10-12 22:25:02 -04:00
Thomas Harte
97a2be71e3
Introduces flush_tracks to Drive, while switching its interface to using Track::Address and adjusting associated integer types.
2017-10-06 21:45:12 -04:00
Thomas Harte
edb9fd301c
Begins this project's conversion to functional-style casts.
2017-10-03 22:04:15 -04:00
Thomas Harte
698e4fe550
Tidies the Disk
file hierarchy.
2017-09-22 22:39:23 -04:00
Thomas Harte
da082673d7
Drives now have a finite number of heads.
...
The Amstrad volunteers itself to be single sided. Everything else stays as it was.
2017-09-15 21:18:36 -04:00
Thomas Harte
42616da7ff
Adjusts the Oric Microdisc to propagate motor control more widely.
2017-09-11 22:15:54 -04:00
Thomas Harte
2f13517f38
Adjusts the 1770 not to talk directly to the drive about motor status.
2017-09-11 22:10:56 -04:00
Thomas Harte
fb9fd26af7
Updates the 1540 for the slightly-more modern world of decoupled drives and disks (!).
2017-09-11 22:08:10 -04:00
Thomas Harte
d3c385b471
Separates the 8272's drive selection signalling from actual drive ownership.
...
Thereby returns working motor control to the CPC.
2017-09-11 21:25:26 -04:00
Thomas Harte
96bf133924
Withdraws requirement for DiskController users to specify a PLL multiplier or to provide rotation speed.
...
In the latter case because it's no longer of any interest to the controller, and in the former because I'd rather it be picked automatically.
2017-09-10 22:56:05 -04:00
Thomas Harte
0622187ddf
Strips Controller of all capabilities now housed on the Drive.
2017-09-10 19:23:23 -04:00
Thomas Harte
90c7056d12
Started devolving timed event loop logic down to the drives, moving them closer to modelling real life.
2017-09-10 14:43:20 -04:00
Thomas Harte
3b12fca417
Corrects non-recurring-pattern adaptation bug: the 'SerialPortVIA' should keep a reference to its VIA, not a copy of it.
2017-09-05 21:19:56 -04:00
Thomas Harte
8eeb7e73cd
Adds a commented-out printf that I might like to use again later.
2017-09-05 21:15:56 -04:00
Thomas Harte
6547102511
Attempts better to hide C1540 implementation details from the reader.
...
In this case not from the compiler, as it's desireable to keep `run_for` as a non-virtual call, and therefore everything else comes alone for the ride.
2017-09-04 20:58:00 -04:00
Thomas Harte
a49594c6a3
Tweaks Vic20 Machine parent class order so that when turned into a CRTMachine, still successfully dynamically casts as a ConfigurationTarget.
...
More thorough thought is required.
2017-09-04 20:56:00 -04:00
Thomas Harte
a42ca290cb
Reformulates the Oric more cleanly into the modern world.
...
Specifically: now that the implementation is contained within the CPP file, there's no need to embed the keyboard, tape player and VIA port handler as private classes. Also the pain of additional syntax is reduced, so the keyboard has been bumped up to a fully data-hiding class. I've also transferred overall ownership of the tape player, AY and keyboard up to the Oric itself, with the VIA merely being wired to them, and added a whole bunch of extra documentation.
2017-09-04 18:22:14 -04:00
Thomas Harte
da09098e49
Updates clipped area per latest CRT response to vertical sync.
2017-09-04 17:51:02 -04:00
Thomas Harte
24b3faa427
Deconstitutes the 6522 into component parts, templated and non-templated.
...
Adjusts the Oric, Vic-20 and C-1540 accordingly, albeit with the quickest possible solutions.
2017-09-04 14:26:04 -04:00
Thomas Harte
96648df5fe
Ensures all parts of the Electron have a fully-defined initial state.
...
Specifically to resolve an error with shift being pressed at startup due to a failure to establish a default value for that flag, but applying the same principle across the board.
2017-08-31 22:29:24 -04:00
Thomas Harte
53a88a7e12
Causes the ZX80/81 to omit support for the wait line if being configured as a ZX80.
2017-08-27 16:45:36 -04:00
Thomas Harte
4a66dd9e82
Arranges for the ZX80/81 to get a peek at target configuration prior to construction. I'm as yet undecided on whether to make this the norm.
2017-08-27 16:42:16 -04:00
Thomas Harte
57bfec285f
Makes it optional whether the Z80 supports the wait line. If the wait line isn't in use, runtime costs are decreased because the optional wait cycles need not be iterated over.
2017-08-26 23:08:57 -04:00
Thomas Harte
e7ad79c79a
Breaks apart the CPC's 6845 bus handler to obey phase 1 and phase 2, and now back-dates interrupts when appropriate.
2017-08-26 14:07:51 -04:00
Thomas Harte
6e99169348
Permits the 6845's bus state to be examined by an owner, eliminating the need to buffer it in the bus handler. But more than that it allows the CRTC to decide when it adjusts the various outputs respective to the main phase. So a net effect of the change is that the CPC now sees vsync a cycle earlier, because my current reading of the 6845 datasheet is that it is set at the end of phase 1, not the beginning of the next phase 1.
2017-08-26 12:59:59 -04:00
Thomas Harte
ee71be0e7e
Added the option not to include ready line support in the 6502 core, and took advantage of it in the Electron, Oric and Vic-20 implementations. Also tagged those as forceinline and/or override final where applicable.
2017-08-21 21:56:42 -04:00
Thomas Harte
cde29c4bf4
Added forceinlines and properly declared finals and overrides.
2017-08-21 21:07:10 -04:00
Thomas Harte
e1aded0d95
Allows Z80 users to opt out of support for the bus request line. Which both now do.
2017-08-21 20:43:12 -04:00
Thomas Harte
0cbc1753b9
Quick fixes: the binary tape player now considers talk to the sleep observer only if motor control changes. The Amstrad CPC no longer attempts to use the component argument to identify the caller, since this
will often be that of the superclass and not that of the derived class known to the CPC.
2017-08-20 13:18:46 -04:00
Thomas Harte
8f5ae4a326
The CPC now responds to tape-originating sleeper observations.
2017-08-20 12:21:02 -04:00
Thomas Harte
e88a51e75e
Worked logic all the way down to the CPC. If the 8272 announces that it is asleep, it is now no longer clocked. Also very slightly cut down on IRQ line chatter to the Z80.
2017-08-20 12:05:00 -04:00
Thomas Harte
f2699a3f2b
Okay, even if releasing it is unsafe, I can at least move the typer so that it is no longer called.
2017-08-20 10:24:01 -04:00
Thomas Harte
85253a5876
Sought further to reduce the processing footprint of palette changes by updating only those table entries that are affected by a change.
2017-08-20 10:13:23 -04:00
Thomas Harte
911ee5a0d3
At least added a fast return.
2017-08-19 22:22:51 -04:00
Thomas Harte
57c5b38a6d
Step one towards cutting much of this cost: build only the table that's appropriate for the current mode, and at least declare when a more minimal change would be sufficient.
2017-08-19 22:19:46 -04:00
Thomas Harte
f68565a33f
Split the static analyser functionality so that it's possible just to ask for the set of media implied by a particular file. Extended ConfigurationTarget so that media alone can be pushed to a machine.
2017-08-17 10:48:29 -04:00
Thomas Harte
b476f06524
Slowed the typer, having discovered that otherwise it has problems transitioning from a shifted to an unshifted character.
2017-08-16 22:12:16 -04:00
Thomas Harte
925e774015
Added a decent portion of documentation. But started feeling like I should address my various ownership decisions. Which would justify a separate pull request.
2017-08-16 16:23:33 -04:00
Thomas Harte
4c15e46fd1
Performed the normative removal from public view of Vic-20 implementation details. Which were hefty.
2017-08-16 16:05:30 -04:00
Thomas Harte
75208b0762
Moves the Electron implementation behind a more opaque interface, in line with changes elsewhere.
2017-08-16 15:33:40 -04:00
Thomas Harte
903a17ae11
Corrected typo and removed replication of what's already declared formally.
2017-08-16 14:53:03 -04:00
Thomas Harte
de1c526789
Cut the amount disclosed by the Atari 2600 for public inspection down to the minimum, relocating implementation into the .cpp.
2017-08-16 14:52:40 -04:00
Thomas Harte
148591b7f2
Hid most of the Oric innards, and corrected a potential multi-thread access error emanating from the Mac side of the world.
2017-08-16 14:35:53 -04:00
Thomas Harte
3c148f5721
Fixed clanger of an error.
2017-08-16 14:02:46 -04:00
Thomas Harte
360c8a99a3
Adjusted Atari2600 actually to use the nominated type of bus extender.
2017-08-16 12:57:32 -04:00
Thomas Harte
06e31f5102
Consequential to the 6502 change, severs the Atari 2600's cartridge container from its former attempt at runtime polymorphism, in favour of each cartridge's specific hardware being defined as a 'bus extender'.
2017-08-16 12:39:15 -04:00
Thomas Harte
42b5b66305
Remove the 6502's use of runtime polymorphism in favour of ordinary templating.
2017-08-16 11:56:52 -04:00
Thomas Harte
3947347d88
Introduces active input handling for the AY and uses it in the CPC to give proper, active keyboard input, rather than push-on-select, which was only ever a temporary hack. Also maps a few more keys for the Amstrad.
2017-08-15 22:47:17 -04:00
Thomas Harte
334872d374
Clarified, slightly.
2017-08-14 12:47:11 -04:00
Thomas Harte
7ea703f150
Started making provisions for a DMA-compatible implementation. Re: the CPC, it sounds like DMA acknowledge might be permanently wired, causing DMA mode seemingly to work from the 8272's point of view.
2017-08-14 08:38:00 -04:00
Thomas Harte
3831fbaca2
Ensured the ZX80 and '81 also provide the necessary hook for destruction.
2017-08-11 12:11:01 -04:00
Thomas Harte
1d8edf58dd
Ensured that a virtual destructor is declared, so that the various automatically-generated real constructors get in on the action.
2017-08-11 12:07:48 -04:00
Thomas Harte
4785e316ff
Now with exposition.
2017-08-11 11:36:03 -04:00
Thomas Harte
44da9de5b0
Tweaked typing timing expectations.
2017-08-11 11:35:28 -04:00
Thomas Harte
4ecd093891
Fixed test for termination of a key sequence; the previous error will have seen this reduce all multi-key sequences to just the one, and expand single-key sequences to "probably" two, posting an out-of-bounds code to the machine at completion.
2017-08-11 11:35:14 -04:00
Thomas Harte
dd4bc87d52
Fixed: should be a full-path #ifdef guard, given that this is one of the classes named relative to its namespace.
2017-08-11 11:21:33 -04:00
Thomas Harte
570d25214e
Made an initial attempt at typer support for the CPC.
2017-08-11 11:21:07 -04:00
Thomas Harte
cf810d8357
Minor: ensure the CRT is set to output as a monitor.
2017-08-10 14:42:47 -04:00
Thomas Harte
4961fda2a9
Ensured counter-intuitive CRTC writes get through, taking the opportunity to correct my handling of port IO in general: selecting multiple devices for input results in a logical AND (i.e. open collector mode), and both the CRTC and gate array will receive data from 'input's if applicable.
2017-08-10 12:39:19 -04:00
Thomas Harte
6a6e5ae79c
Forced users of the 6845 to be explicit about which type. So far with no effect.
2017-08-10 12:28:57 -04:00
Thomas Harte
484524d781
Implements RAM paging. The 6128 is now emulated.
2017-08-08 16:01:56 -04:00
Thomas Harte
a7103f9333
Disks are now communicated to the 8272. Which is able to handle four of them.
2017-08-06 13:24:14 -04:00
Thomas Harte
29288b690e
Switched disk controllers to be instantiated explicitly in terms of cycles, created an Amstrad-specific subclass of the 8272 to record the direct programmatic availability of all disk motors bundled together, and otherwise adjusted to ensure the thing is clocked and that the motor is enabled and disabled appropriately. The 8272 is also now formally a subclass of the incoming MDM controller.
2017-08-06 09:45:16 -04:00
Thomas Harte
3e984e75b6
Strung up an empty shell that eventually should contain the 8272, and added appropriate IO decoding to the Amstrad.
2017-08-05 19:45:52 -04:00
Thomas Harte
9e8645ca7a
Fixed ROM paging port decoding. It should have been fd00 if completely decoded, not df00, but also shouldn't be completely decoded.
2017-08-05 19:24:03 -04:00
Thomas Harte
caf3ac0645
Sought: (i) to instruct the CPC that it should be a 664, not a 464, if given a disk image (at least until I have RAM paging implemented for a 6128); (ii) to support ROM selection within the CPC and allow paging in of AMSDOS.
2017-08-05 19:20:38 -04:00
Thomas Harte
4b19cf60df
Added omitted semicolon.
2017-08-05 09:18:55 -04:00
Thomas Harte
b3788fed41
Fixed AY queuing behaviour as handled by the Amstrad. I think I need to come up with clearer semantics here.
2017-08-05 09:12:17 -04:00
Thomas Harte
a63aa80dc9
Merge branch 'master' of github.com:TomHarte/CLK
2017-08-04 16:51:52 -04:00
Thomas Harte
63f57c8c4f
Adjusted visible portion of frame; completely empirical, as I'm chasing a machine that shipped with a monitor.
2017-08-04 16:51:46 -04:00
Thomas Harte
f075fea78c
Introduces filtering of the CRTC's vsync signal into the gate array.
2017-08-04 16:36:55 -04:00
Thomas Harte
c0f0c68f4f
Corrects quick-hack version of border drawing: the assumption that the colour must be the same over a plotted period. Also corrects my entry for colour 15.
2017-08-04 12:13:05 -04:00
Thomas Harte
d9097facf1
Found documentation that makes more sense, and in practice seems to be more correct: the test after vertical sync is for greater than 32, not less. Also I decided to chance my arm on counter reset also resetting interrupt request. The raster effects of Ghouls 'n' Ghosts is now pretty much correct but one line off. I think probably either something is off in my wait-two logic on the post-vsync timer event, or possibly the vsync bit exposed via the PPI doesn't mean exactly what I think it means.
2017-08-04 08:56:09 -04:00
Thomas Harte
b927500487
Clarified code a little, but this is mostly fiddling in the margins.
2017-08-03 22:00:30 -04:00
Thomas Harte
e71eabedf9
Fixed timer clearing tet.
2017-08-03 21:30:04 -04:00
Thomas Harte
33ed27c3ad
Minor tidiness: included missing headers, and spaced out the ROM type and key lists for readability.
2017-08-03 12:45:42 -04:00
Thomas Harte
575b1dba75
Formally declared the ZX80/81 and Amstrad CPC as keyboard machines in their public interface. Which means not having to repeat the meaning of set_key_state and clear_all_keys. So: a minor DRY improvement.
2017-08-03 12:38:22 -04:00
Thomas Harte
bbb17acf3a
Expanded interface so that an external machine caller can request a string be typed without any knowledge of whatever it intends to do re: CharacterMappers. Which is immediately useful in paste functionality.
2017-08-03 11:50:50 -04:00
Thomas Harte
ad3a98387f
Within the Typer
framework: hatched out CharacterMapper
as a distinct thing from the target for keypresses, better to formalise responsibility but also to make it easy cleanly to sever that stuff into its own little part.
2017-08-03 11:42:31 -04:00
Thomas Harte
2f2071be8a
These should actually both be in the public header, as the types are used in an exposed method.
2017-08-02 22:18:30 -04:00
Thomas Harte
6d510e4e70
Made it no longer public knowledge that any sort of Typer is involved in being a ZX80/81.
2017-08-02 22:17:22 -04:00
Thomas Harte
8e0736fbe6
Reinstated typing ability, albeit with an ugly inline insertion. But I think I can defer dealing with typers to another pull request. The whole issue of keyboard mapping probably needs reappraisal.
2017-08-02 22:16:09 -04:00
Thomas Harte
681d1e2f8d
Breaking its typer for now, adapted the ZX80/81 to having a Z80, not being one.
2017-08-02 22:12:59 -04:00
Thomas Harte
42e70ef993
Adjusted slightly as per Z80 change, and to pull everything internally declared into the Amstrad CPC namespace.
2017-08-02 22:11:03 -04:00
Thomas Harte
d3bf8fa53b
Upped the documentation.
2017-08-02 20:37:26 -04:00
Thomas Harte
f5e2dd410e
Constrained output to the centre 90%.
2017-08-02 19:55:44 -04:00
Thomas Harte
e50adf1cc8
Were my TZX support up to it, this would likely be sufficient for tape emulation.
2017-08-02 13:50:14 -04:00
Thomas Harte
dcab10f53e
Ensured the AY's async queue doesn't just fill and fill.
2017-08-02 07:38:35 -04:00
Thomas Harte
f602f9b6ec
Adds an attempt to clock the AY.
2017-08-02 07:21:33 -04:00
Thomas Harte
4d5d5041df
Attempted to ensure a clean startup.
2017-08-01 22:18:42 -04:00
Thomas Harte
587eb3a67c
Factored interrupt counting out of the CRTCBusHandler.
2017-08-01 22:15:39 -04:00
Thomas Harte
8d39a20088
Added proper output of mode 3, were anything ever to try to use it.
2017-08-01 21:51:41 -04:00
Thomas Harte
4b6370eb86
Realised my colour error: mapping the ROM numbers as though they were the hardware numbers. Having fixed that, spotted that I was deserialising R and B the wrong way around and dividing by too much. Colours now appear to be correct.
2017-08-01 21:47:52 -04:00
Thomas Harte
c6e340a8a2
Wired up the vsync signal. Pen 15 no longer flashes like crazy. Still can't figure out why the palette is so askew; was looking for perhaps some sort of detection of a green screen rather than a colour one, but there's no obvious input for that.
2017-08-01 21:21:59 -04:00
Thomas Harte
31c7153301
Corrected bit to colour mapping for modes 0 and 1. The total palette is still way off but there's consistency between modes now.
2017-08-01 20:52:42 -04:00
Thomas Harte
7e04d00cc1
Fixed key values, causing the new set of keys to work, decreased quantity of output and ensured that pixels appear in modes 0 and 2.
2017-08-01 20:39:10 -04:00
Thomas Harte
eca9586a0f
Fixed: input value is no longer overwritten by 0xff. The '0' key now works.
2017-08-01 20:19:02 -04:00
Thomas Harte
2e4577f741
Made a game attempt at implementing a (sticky) keyboard. No effect yet.
2017-08-01 17:52:05 -04:00
Thomas Harte
f5b278d683
Added enough stuff to put the emulated Amstrad CPC in a state of knowing whether its '0' key is pressed.
2017-08-01 17:31:56 -04:00
Thomas Harte
e6854ff8db
Corrected typo: the input to an AY is BDIR, not BCDIR.
2017-08-01 17:06:57 -04:00
Thomas Harte
3b292273c7
Fixed: BC2 is always implicitly set. The machine is now periodically checking the AY's register 14 (i.e. the first input port), so probably there's enough here now to implement keyboard input.
2017-08-01 17:05:11 -04:00
Thomas Harte
cb732e5d5f
Made an attempt to wire in an [unclocked] AY, in an endeavour to get to keyboard reading.
2017-08-01 17:01:58 -04:00
Thomas Harte
08ad35efd9
It's barely an implementation of the 8255, but ensured that data is bounced into the PortHandler, conveniently assuming the interaction mode used by the CPC.
2017-08-01 16:34:13 -04:00
Thomas Harte
58b98267fc
Formally transferred ownership of PIO accesses to an incoming template, and decided to start being explicit about how to specify the interfaces and provide fallbacks for optional behaviour for the new, clean generation of interfaces. A full-project sweep will inevitably occur but I'll try to tie off this branch first.
2017-08-01 16:15:19 -04:00
Thomas Harte
a27946102a
Took a shot at the interrupt counter. Attempts at keyboard reading now recur so it'll probably do for now. I think that next puts me into the realm of needing to implement the 8255.
2017-08-01 15:49:16 -04:00
Thomas Harte
6ac7132799
Had a quick go at properly outputting Mode 1, adding wiring to communicate palette and mode changes to the CRTC bus handler. Colours are off but it's sufficient for now.
2017-08-01 15:16:13 -04:00
Thomas Harte
ca42abab70
Doubled up to ensure that every byte that should be inspected is represented. This makes it clearer that I'm on the right road. A garbled version of 'Amstrad 64k Microcomputer' can be discerned, in a weird grayscale and with the right-hand column missing and skewed output as a result.
2017-08-01 07:56:44 -04:00
Thomas Harte
933d69a256
Fixed slightly: the CPC wiki has a typo. It's 12 and 13 that move up to 14 and 15.
2017-08-01 07:51:13 -04:00
Thomas Harte
10a5581aea
Made first attempt at offering some sort of pictographic of actual RAM contents.
2017-08-01 07:34:12 -04:00
Thomas Harte
3ae699964f
Ensured an actual pixel stream is supplied for pixel regions. Though it's just a long stream of white pixels for now. So visual output is unchanged.
2017-08-01 07:24:29 -04:00
Thomas Harte
9d953421d8
After a quick check, added a couple of other _delegate initialisations. I should probably find a way to template this.
2017-08-01 07:07:43 -04:00
Thomas Harte
763e3b65d1
Ensured a proper initial value for delegate_
.
2017-07-31 22:46:06 -04:00
Thomas Harte
42dd27c9b1
Shunted method bodies inline, given that there's no need for a declaration/definition distinction.
2017-07-31 22:39:25 -04:00
Thomas Harte
3df13cddd4
As per my keenness for cleanliness improvements corresponding to my ever-increasing C++ ability: turned the Amstrad into something that a factory produces, allowing me completely to hide a bunch of implementation details.
2017-07-31 22:32:04 -04:00
Thomas Harte
c2253c1e0f
Fixed multiplier: the dot clock I've used to instantiate the CRT is the pixel clock, not the character clock.
2017-07-31 22:17:46 -04:00
Thomas Harte
f742fd5d4a
Made basic attempt to get something on screen: white where the display is enabled, black for the border.
2017-07-31 22:13:20 -04:00
Thomas Harte
69b99fe127
Transferred ownership of the CRT to the CRTC bus handler, to give it easy access.
2017-07-31 22:04:52 -04:00
Thomas Harte
e28829bd1b
Corrected CRTC timing, gave it someone to talk to and a means with which to talk.
2017-07-31 20:14:46 -04:00
Thomas Harte
68ceeab610
Created a 6845 class and started pushing data at it and clocking it. It doesn't currently have the concept of a bus but will do, hence the in-header implementation.
2017-07-31 19:56:59 -04:00
Thomas Harte
68dca9d047
Made a first attempt at ROM paging, with pretty much the same scheme that'll be needed for 128kb support.
2017-07-31 19:37:28 -04:00
Thomas Harte
d88ca151f4
Added a first attempt at output port decoding. Just logging for now.
2017-07-31 19:25:10 -04:00
Thomas Harte
3c90218c3d
With a very basic stab at something a bit like the memory map (sans paging), execution begins.
2017-07-31 19:15:43 -04:00
Thomas Harte
afd409c883
Ensured that ROM images are loaded and passed to the Amstrad CPC.
2017-07-31 18:44:49 -04:00
Thomas Harte
9c04d851e4
Added the basics necessary to get the CPU ticking over, at a nominal 4Mhz but with the wait states that I currently believe to be accurate.
2017-07-31 07:29:50 -04:00
Thomas Harte
1d6fe11906
Added an instance of Outputs::CRT::CRT
. So progress is now: select CDT, up comes a blank window.
2017-07-31 07:16:51 -04:00
Thomas Harte
c0f1313830
Performed sufficient wiring to get to the point where attempting to load a CDT creates an instance of the Amstrad CPC and then fails only because the thing vends a nullptr
CRT.
2017-07-30 22:05:29 -04:00
Thomas Harte
4abd62e62b
Standardises on const [Half]Cycles
as the thing called and returned, rather than const [Half]Cycles &
as it's explicitly defined to be only one int
in size, so using a reference is overly weighty.
2017-07-27 22:05:29 -04:00
Thomas Harte
968d2bb8ba
Brought Typer
into the new run_for
orthodoxy, making it easier to clock consistently regardless of unit. Which necessitated adding a negative operator for WrappedInts.
2017-07-27 21:53:45 -04:00
Thomas Harte
9ef232157b
Revoked the operator bool() on WrappedInt as providing an indirect means for implicit but incorrect assignment to unwrapped ints. Got explicit about run_for
intention and simplified HalfClockReceiver slightly by building a lossy and a flushing conversion to Cycles into HalfCycles. Adapted the all-RAM Z80 properly to return HalfCycles.
2017-07-27 21:38:50 -04:00
Thomas Harte
8848ebbd4f
Formalised set_interrupt_line's optional parameter as being a count of HalfCycles; corrected PartialMachineCycle.is_wait and effected the proper timing for counter reset on a ZX81.
2017-07-27 21:10:14 -04:00
Thomas Harte
8361756dc4
Switched definitively to the works-for-now approach of requiring an explicit opt-in where somebody wants to clock a whole-cycle receiver from a half-cycle clock.
2017-07-27 07:40:02 -04:00
Thomas Harte
81a3899381
Adjusted the Z80 formally to communicate in terms of half cycles rather than whole.
2017-07-26 19:42:00 -04:00
Thomas Harte
cda223ffc0
Added explicit signedness cast.
2017-07-25 22:49:03 -04:00
Thomas Harte
966b5e6372
Adapted the Z80's perform_machine_cycle
to return Cycles
.
2017-07-25 22:25:44 -04:00
Thomas Harte
279c369a1f
Switched to Cycles as the result from the 6502 perform_bus_operation
, helping slightly to clarify what you're intended to return and reducing type jumping within the 6502 implementation.
2017-07-25 22:21:09 -04:00
Thomas Harte
d9c6b3bcf7
Corrected TIA's WSYNC lookahead to accept Cycles
.
2017-07-25 22:13:41 -04:00
Thomas Harte
296c7cec05
Adopted flush
widely.
2017-07-25 20:42:51 -04:00
Thomas Harte
75d67ee770
Relocated ClockReceiver.hpp as it's a dependency for parts of the static analyser, and therefore needs to be distinct from the actual emulation parts.
2017-07-25 20:20:55 -04:00
Thomas Harte
a1e9a54765
Eliminated redundant uses of ClockReceiver
and sought to ensure that proper run_for
s are inherited all the way down.
2017-07-25 20:09:13 -04:00
Thomas Harte
8d1dacd951
Clean ups along the Electron::Tape line: ensured that the ClockReceiver is opted into only once, and that its run_for
propagates all the way along the chain.
2017-07-25 20:01:30 -04:00
Thomas Harte
40339a12e1
Formalised the use of a cycles count with a divider, bringing a few additional plain-int users into the fold.
2017-07-25 07:15:31 -04:00
Thomas Harte
90bf6565d0
Reduced int/Cycle conversions in the Electron and on the Atari 2600, where the current framework makes it possible to do so.
2017-07-24 22:53:13 -04:00
Thomas Harte
c1527cc9e2
Reduced back-and-forth between Cycles
and int
s within the Oric.
2017-07-24 22:46:31 -04:00
Thomas Harte
c77a83d86f
The 6560 is now a ClockReceiver
. This reduces to zero the number of remaining instances of the text run_for_cycles in this codebase.
2017-07-24 22:38:35 -04:00
Thomas Harte
a6e377aa57
The Electron's video is now a ClockReceiver
.
2017-07-24 22:36:42 -04:00
Thomas Harte
9435c1e12a
The 1540 is now a ClockReceiver
.
2017-07-24 22:32:41 -04:00
Thomas Harte
efdac2ce8c
The 6522 is now a ClockReceiver
.
2017-07-24 22:29:09 -04:00
Thomas Harte
2912d7055b
The 6532 is now a ClockReceiver
.
2017-07-24 21:57:24 -04:00
Thomas Harte
55ecb0c022
Converted the Microdisc into a ClockReceiver
.
2017-07-24 21:51:13 -04:00
Thomas Harte
13f7aa4063
The TIA is now a ClockReceiver
.
2017-07-24 21:48:34 -04:00
Thomas Harte
915f587ef1
Updated the Electron's tape class to be a ClockReceiver
.
2017-07-24 21:36:30 -04:00
Thomas Harte
b7f88e8f61
Filter
is now a ClockReciever
, affecting all sound output devices.
2017-07-24 21:29:13 -04:00
Thomas Harte
8a2bdb8d22
Converted the TimedEventLoop and the things that sit atop it into ClockReceiver
s.
2017-07-24 21:19:05 -04:00
Thomas Harte
b82bef95f3
Decided to follow through on Cycles
and HalfCycles
as complete integer-alikes. Which means giving them the interesting range of operators. Also killed the implicit conversion to int as likely to lead to type confusion.
2017-07-24 20:10:05 -04:00
Thomas Harte
ba088e5545
Adapted the Z80 into a clock receiver, which also vends Cycles
rather than a raw int within its PartialMachineCycle
struct. The objective is to update it to vend HalfCycles within its struct, but I think I need to do some work on cycle/half-cycle arithmetic first.
2017-07-23 22:15:04 -04:00
Thomas Harte
6369138bd1
Converted the Oric's video output into a ClockReceiver
.
2017-07-22 23:11:30 -04:00
Thomas Harte
c2a7dffa7d
Converted the ZX80/81 video component into a ClockReceiver. As it happens, it's most convenient to take the half-cycle bus here.
2017-07-22 23:02:28 -04:00
Thomas Harte
2ff157cf7a
Switched CRTMachine over to use Cycles
as an explicit statement of units, and followed through on the effects of that.
2017-07-22 22:17:29 -04:00
Thomas Harte
83628b285b
Experimentally turned the 6502 into a clock receiver. No problem encountered.
2017-07-22 21:52:21 -04:00
Thomas Harte
1bbb4cb478
Increased documentation.
2017-07-22 17:39:51 -04:00
Thomas Harte
d46da6ac9d
Added documentation.
2017-07-22 17:31:12 -04:00
Thomas Harte
dddb30477b
Used a different inner-loop variable, for clarity.
2017-07-21 21:52:08 -04:00
Thomas Harte
37459a3ebc
Fixed parameter shadowing.
2017-07-21 21:51:18 -04:00
Thomas Harte
3f609e17b3
Factored out the table-lookup approach to being a typer, and adjusted so as definitely to limit myself to positive offset table lookups.
2017-07-21 21:18:51 -04:00
Thomas Harte
2471ef805b
Fixed signed/unsigned comparison and potential negative table reference.
2017-07-21 20:45:49 -04:00
Thomas Harte
a3e0024980
Chopped time accumulation out of the default Tape
process because it's proving to be sufficiently expensive for a TZX as not to be worthwhile. Introduced a cheaper position capturing/restoring method.
2017-07-21 18:55:03 -04:00
Thomas Harte
44e5a03cf2
Removed just-don't-power-the-tape approach to pausing and playing, in favour of being fully communicative.
2017-07-19 19:21:27 -04:00
Thomas Harte
b3861ff755
Reduced copying of Pulses.
2017-07-16 19:49:31 -04:00
Thomas Harte
1d3ae31755
Abstracted the concept of an Acorn shifter away from being a PLLParser. The Acorn tape parser now skips using that class and uses the shifter. The actual Electron also uses the shifter. So the two are completely aligned. Net result: the Electron should successfully load exactly when static analysis was successful.
2017-07-16 19:24:01 -04:00
Thomas Harte
f931cd582d
Switched to use of std::vector
in those few remaining places where I was still using a unique_ptr
to a native type and new
ing for myself. So, some of my earliest bits of code.
2017-07-16 13:54:07 -04:00
Thomas Harte
481487f084
Oh yuck, it looks like I've repeated this same test in two different places. Must figure out where to factor it out to. But in the meantime, the emulated Electron has just loaded its first CSW.
2017-07-13 22:39:30 -04:00
Thomas Harte
ac59dd8b1d
Added enough typing to issue a load command. No thoughts as to running yet though.
2017-07-09 22:07:12 -04:00
Thomas Harte
353c854734
Removed a TODO that is no longer appropriate.
2017-07-09 22:06:50 -04:00
Thomas Harte
3e5c209039
Added basic Typer support for the ZX80 and '81.
2017-07-09 22:00:34 -04:00
Thomas Harte
ed28260aaf
Hardens the ZX80/81 video routines to ensure they never try to push data into the future and don't double-count time when pixels would ostensibly run into sync. You could previously see the CRT being handed negative run lengths if sync interrupted pixels or if a run of more than 320 pixels (my arbitrary buffer size) occurred, with corresponding poor behaviour given my use of unsigned numbers.
2017-07-09 19:33:05 -04:00
Thomas Harte
87658e83c1
Moved line counter reset logic; I think this is actually correct.
2017-07-09 00:05:30 -04:00
Thomas Harte
4509c3ce34
By observation, it appears that disabling vsync occurs on any port output whatsoever, as long as NMI isn't blocking it.
2017-07-08 21:01:52 -04:00
Thomas Harte
30e93979d2
Removed data work if sync is enabled; in that case no data is output.
2017-07-08 21:01:07 -04:00
Thomas Harte
d6b87053bf
Introduced an explicit record of whether a video byte is latched. It's definitely incorrect to treat the latching of 0 as equivalent to no latching, as the byte that will eventually become video is not strongly implied.
2017-07-08 20:40:19 -04:00
Thomas Harte
22389a5d2d
Merge branch 'master' into HiRes
2017-07-08 20:38:25 -04:00
Thomas Harte
54efcb7e2f
Made a game attempt at automatic motor control and ensured setting is initialised correctly from the user defaults.
2017-07-08 19:31:20 -04:00
Thomas Harte
e2575d6de4
Routed tape motor selections through to the C++ side of the world, and ensured that manual tape playback works properly.
2017-07-08 19:21:12 -04:00
Thomas Harte
46fff8e8a2
Ensured bit 8 is uniquely from the latched video byte, not an OR of that with the refresh address.
2017-07-06 22:48:48 -04:00
Thomas Harte
a3684545b5
Added a block on the tape motor for a short period after each time the ROM routine is intercepted for a substituted byte read. To reduce the collision between fast tape and real tape loading.
2017-07-06 22:33:54 -04:00
Thomas Harte
b842c5b8bb
Merge branch 'master' into ZX81FastLoading
2017-07-06 22:03:24 -04:00
Thomas Harte
0c037627fc
Typer fixes: the recipient no longer releases the caller, and a duplicate call to strlen and piece of arithmetic is corrected.
2017-07-06 21:38:56 -04:00
Thomas Harte
a72a2e0a1a
Ensured tape doesn't proceed of its own volition when in fast-loading mode.
2017-06-23 20:21:37 -04:00
Thomas Harte
50375fb373
Ensured tape position is unaffected if the attempt at loading quickly fails.
2017-06-23 20:18:19 -04:00
Thomas Harte
cb105fdeb4
Took a first stab at high-res support.
2017-06-22 22:48:17 -04:00
Thomas Harte
acfd4dde36
Reduced port writes which can adjust programmatic sync, and prevented anything while NMI generation is active. Moved line counter increment from triggered by interrupt acknowledge to triggered by horizontal sync. In both cases, cribbing from my own earlier work. Initial results suggest that sync issues are resolved in third-party software.
2017-06-22 22:44:06 -04:00
Thomas Harte
644ef13acd
Connected up the fast-tape GUI option for the ZX80 and '81.
2017-06-22 20:20:31 -04:00
Thomas Harte
b7c978e078
Added getters for most of the input lines, and attempted to round out the ZX81's wait logic.
2017-06-22 20:11:19 -04:00
Thomas Harte
52d9ddf9e5
Gave the binary tape player a more logical assignment of wave level to output level. Which miraculously appears to have been the issue with the ZX80/81 tape loading — the inconsistency of silences seems to have been the issue.
2017-06-21 22:13:24 -04:00
Thomas Harte
a6810fc3ef
Removed some minor duplicity and ensured that hsync/NMI ends on the nominated cycle, not one afterwards.
2017-06-21 21:44:42 -04:00
Thomas Harte
15f6c51062
Added the most trivial implementation of the ZX81 wait line.
2017-06-21 21:28:14 -04:00
Thomas Harte
e1355d4b62
Restored proper video output.
2017-06-21 21:18:09 -04:00
Thomas Harte
4bf13610ce
Reinstated interrupts by moving the refresh test back into the refresh cycle.
2017-06-21 21:03:39 -04:00
Thomas Harte
0e0ce379b4
Renamed MachineCycle to PartialMachineCycle given that it mostly no longer intends to describe an entire machine cycle.
2017-06-21 20:38:08 -04:00
Thomas Harte
36e8a11505
Sought to simplify the way partial machine cycles are communicated, for ease of machine implementation. Also implemented the wait line.
2017-06-21 20:32:08 -04:00
Thomas Harte
e1a2580b2a
Renamed BusOperation to MachineCycle::Operation.
2017-06-17 21:53:45 -04:00
Thomas Harte
08a542a324
Reenabled the fast-loading hack.
2017-06-15 18:30:12 -04:00
Thomas Harte
9b3d05e05f
Simplified decoding logic.
2017-06-14 22:24:44 -04:00
Thomas Harte
d8e3103a2b
Fixes: switched ZX80 and ZX81 timing to the correct way around, ensured that my wait takes effect if HALT **isn't** set, and made sure to recover from it.
2017-06-13 21:48:17 -04:00
Thomas Harte
76a64d13a0
Made a first attempt at ZX81 emulation.
2017-06-13 21:25:55 -04:00
Thomas Harte
1e975859c2
Started splitting ZX80 and ZX81 paths. Also the '80 fires its horizontal sync a little earlier than the '81, so pulled that back a little.
2017-06-13 20:09:09 -04:00
Thomas Harte
4c5261bfa0
Made first attempt to use the horizontal counter for something; here for sync timing only, even though I've gone exclusively with '81-style timing for now.
2017-06-12 22:28:30 -04:00
Thomas Harte
8b09b4180b
This now at least remembers whether it is meant to be a ZX81 and has storage for a horizontal counter.
2017-06-12 21:33:16 -04:00
Thomas Harte
b9dbb6bcf8
Discovered my timing error: the I/R <-> A loads should take an extra cycle. This means the ZX80 now finally takes the correct 207 cycles per line. Fixed the video output wave to be clocked at the appropriate rate.
2017-06-12 18:55:04 -04:00
Thomas Harte
302c2e94de
Corrected lingering hard-coded mask. So titles for memory configurations above 1kb now load.
2017-06-11 21:27:46 -04:00
Thomas Harte
06fe07932a
While tidying up, killed an unused instance variable.
2017-06-11 21:21:26 -04:00
Thomas Harte
6913c7a018
This also can just use rom_mask_
.
2017-06-11 19:29:20 -04:00
Thomas Harte
6b602c74b7
Made an attempt to support memory maps other than the unexpanded default of 1kb.
2017-06-11 19:29:02 -04:00
Thomas Harte
e40d553045
Bumped the tape parser up into the machine to ensure a maintained state. Temporarily disabled normally-timed tape playback.
2017-06-11 18:31:43 -04:00
Thomas Harte
e5b30cdfbb
Attempted to ensure appropriate resumption of processing after quick-reading a tape byte.
2017-06-11 17:28:47 -04:00
Thomas Harte
ba5f34f827
Narrowed view to the centre 80% of a frame.
2017-06-11 17:24:32 -04:00
Thomas Harte
84d2feb2e6
Cleaned up and implemented fast-tape hack. I've decided it'd be better to test some other software, potentially to give multiple issues to think about, rather than sitting around with just the one.
2017-06-11 16:42:49 -04:00
Thomas Harte
d910a4fd38
Adjusted to signal an interrupt during the refresh cycle rather than weirdly just afterwards. Which cuts video timing down by 4 cycles a line. There still might be a problem here somewhere though, as I'm getting 206 cycles/line and the internet states it should be 207.
...
Also: lots of printfs have grown temporarily as I try to figure out what I'm doing so wrong as to break loading.
2017-06-11 13:32:20 -04:00
Thomas Harte
5626d35bc4
Tried flipping the bit meaning; decided at least to leave it in full-byte form.
2017-06-06 18:38:05 -04:00
Thomas Harte
63e0802f4e
Ensured tape input appears on the returned value.
2017-06-06 18:16:27 -04:00
Thomas Harte
e3ee9604a5
Added comments.
2017-06-06 18:01:33 -04:00
Thomas Harte
8c66e1d99d
Factored out ZX80/81 video and rejigged to ensure it will keep ticking over irrespective of whether the machine is supplying data.
2017-06-06 17:53:23 -04:00
Thomas Harte
ca9e8aecd6
Made a seemingly unsuccessful attempt to add tape input.
2017-06-06 10:13:32 -04:00
Thomas Harte
cc4cb45e9d
Implemented keyboard input and ensured that the signal generated is marked as composite, putting the colour-suppression ball into the CRT's court.
2017-06-06 09:25:18 -04:00
Thomas Harte
ebbf6e6133
Surprisingly, I think this may actually be the correct output: stopped throwing away the I part of the refresh register and flipped black and white.
2017-06-06 09:03:09 -04:00
Thomas Harte
cba07dec7e
Doubled up to display all eight pixels. To confirm that they are the wrong pixels.
2017-06-06 08:59:00 -04:00
Thomas Harte
6f7037b2b1
Made an initial stab at outputting half the correct pixels.
2017-06-06 08:55:07 -04:00
Thomas Harte
ef4b2f963d
Probably more-or-less corrected. But this is all a bit too interdependent.
2017-06-05 23:52:56 -04:00
Thomas Harte
97f3ff03b6
Restored white background and attempted to correct output timing deficiencies. Incomplete success.
2017-06-05 23:50:04 -04:00
Thomas Harte
2fbc7a2869
Made a very basic attempt at getting something that at least demarcates proper graphics output.
2017-06-05 23:32:49 -04:00
Thomas Harte
4983718df7
Got to outputting something to the CRT. Should be just proper syncs and a paper background. It's not synchronising properly, so something is amiss in my timing.
2017-06-05 10:47:42 -04:00
Thomas Harte
23ca00fd9a
Added memory fuzzing as a way to verify state being written by the Z80. Eventually discovered the HALT problem as fixed in the last commit, so have stripped away the caveman stuff again.
2017-06-05 10:36:07 -04:00
Thomas Harte
893f61b490
Attempted specifically to reproduce the 1kb ZX80 memory map in the hope of getting compact lines and in case mirroring is why I'm getting completely empty video reads. Still no action.
2017-06-05 09:38:49 -04:00
Thomas Harte
7e3a46c33e
[Re]discovered that sync may also be a product of the interrupt cycle. So started looking into that.
2017-06-04 21:54:55 -04:00
Thomas Harte
73654d51dd
Wired up actually to run.
2017-06-04 18:37:13 -04:00
Thomas Harte
096551ab3e
Made a first attempt to hash out the ZX80's bus. Video output isn't yet going though. Can't seem to find clarity on whether horizontal sync is really programmatic. Let's see.
2017-06-04 18:32:23 -04:00
Thomas Harte
c485c460f7
Imported the ZX80 and 81 system ROMs (though not publicly), added enough code to post their contents into C++ world.
2017-06-04 18:08:35 -04:00
Thomas Harte
d2637123c4
Added necessary support to get as far as an empty window when attempting to load a piece of ZX80 software.
2017-06-04 17:55:19 -04:00
Thomas Harte
2562306802
Merge branch 'master' into Z80
2017-05-16 21:05:00 -04:00
Thomas Harte
2ee8a7056e
Corrected TIA no longer to assume phase is an automatic quarter askew.
2017-05-16 20:43:28 -04:00
Thomas Harte
a5075d9eb5
Formalised the reasoning behind the colour phase fix-up and made it an opt-in per-caller value. Only the Oric currently needs to opt in.
2017-05-16 20:31:39 -04:00
Thomas Harte
eb8a2de5d6
Settled definitively on flush
as more communicative than synchronise
(and slightly more locale neutral); culled some more duplication from the Z80.
2017-05-15 07:38:59 -04:00
Thomas Harte
0808e9b6fb
Pulled the 6502 into a CPU namespace, making it an instance of something that has micro-opcodes and schedules them, and factoring out the formulation of a register pair.
2017-05-14 22:08:15 -04:00
Thomas Harte
8e35e913bb
Formally withdrew the 'load automatically' option for the Vic, having removed that option elsewhere.
2017-05-14 16:59:24 -04:00
Thomas Harte
5d91a2600d
Permitted ROM-style PRGs that are not a power-of-two in size, and added extra safety checks on loading data from a tape.
2017-05-08 22:15:35 -04:00
Thomas Harte
cb66c7e2dc
Performed some minor tidying.
2017-05-08 21:05:35 -04:00
Thomas Harte
61f8f2f18c
Switched to a more straightforward way of exiting from tape data loading.
2017-05-08 20:58:55 -04:00
Thomas Harte
7b43ae0a92
Implemented a catch for loading the data portion of files.
2017-05-07 22:22:59 -04:00
Thomas Harte
2807e3134f
Implemented speedy header finding. So that's half of it.
2017-05-07 20:32:48 -04:00
Thomas Harte
0771363f3b
Removed one piece of unnecessary logging.
2017-05-06 22:22:03 -04:00
Thomas Harte
2edf73908c
Temporarily disabled the existing fast loading implementation in pursuit of another, and started trying to correct the lack of connection between the userport VIA and the tape drive.
2017-05-06 22:00:12 -04:00
Thomas Harte
ed6b135015
Made final switch to permit high-sampling rate Atari audio.
2017-04-15 21:18:00 -04:00
Thomas Harte
f95015c7f6
Pulled out the divisor for audio.
2017-04-03 21:16:39 -04:00
Thomas Harte
814c0ada13
Fixed action counts for border motion.
2017-03-26 18:33:05 -04:00
Thomas Harte
dfc468f220
Locked down all initial state.
2017-03-26 15:47:04 -04:00
Thomas Harte
e01f3f06c8
Completed curly bracket movement.
2017-03-26 14:34:47 -04:00
Thomas Harte
3229502fa1
Standardised curly bracket placement across the Atari.
2017-03-23 21:59:16 -04:00
Thomas Harte
a26b87f348
Fixed: mistake was failure to count ready cycles.
2017-03-20 20:44:03 -04:00
Thomas Harte
4c3cc42c91
This gives a very noisy version of the real audio.
2017-03-20 20:38:29 -04:00
Thomas Harte
f3f4e1a541
Made a first, hacky, attempt at audio.
2017-03-20 19:35:51 -04:00
Thomas Harte
4722f6b5c4
Fixed sprite disappearance: test should be applied predecrement, not post — it relates to the address being used this access, not the next one.
2017-03-19 18:58:35 -04:00
Thomas Harte
7d8d1c7828
Fixed 'random' number generator.
2017-03-19 18:54:35 -04:00
Thomas Harte
4bb70e7d31
Resetting the mask upon low byte write appears to resolve some issues.
2017-03-19 18:49:37 -04:00
Thomas Harte
321030bb44
Added a slightly faulty but seemingly 'close' version of masking.
2017-03-19 18:28:06 -04:00
Thomas Harte
6c161b1150
This gives something that might be the correct background.
2017-03-19 17:49:48 -04:00
Thomas Harte
d5c37c8619
Shushed a little, so as to be able to see a reasonable amount of output during my lifetime.
2017-03-19 17:38:54 -04:00
Thomas Harte
7c66c36d3f
Attempted at least to manage appropriate data storage.
2017-03-19 17:31:08 -04:00
Thomas Harte
031a68000a
Added a class to contain the Pitfall 2 pager and a skeleton of initial work.
2017-03-18 22:08:47 -04:00
Thomas Harte
c3d82f88a5
Tidied up and commented on the Activision stack implementation.
2017-03-18 21:01:58 -04:00
Thomas Harte
c033bad0b9
Here's MNetwork!
2017-03-18 20:51:49 -04:00
Thomas Harte
c31d85f820
Re-emplaced the MegaBoy. Also cut detritus from the main Atari header.
2017-03-18 19:02:34 -04:00
Thomas Harte
217fbf257e
CBS RAM Plus returns.
2017-03-18 18:56:20 -04:00
Thomas Harte
0b611a14b9
Tigervision paging returns.
2017-03-18 18:50:13 -04:00
Thomas Harte
df6861c9dc
Parker Bros paging is back.
2017-03-18 18:21:01 -04:00
Thomas Harte
a4cd12394e
Reinstated the Activision stack pager.
2017-03-18 18:03:48 -04:00
Thomas Harte
e0bca1e37b
Reinstated the 16 and 32 kb Atari pagers, and ensured the 6532 always starts in a valid state.
2017-03-18 17:34:34 -04:00
Thomas Harte
55ce851bb2
Fixed types of the 8k cartridges, ensured the 6502 starts without an IRQ request history.
2017-03-18 17:04:01 -04:00
Thomas Harte
e8d34f2eb4
Having farmed out the bus, the Atari itself no longer is/owns a 6502.
2017-03-18 16:34:41 -04:00
Thomas Harte
bb3daaa99b
Sought to reintroduce the Atari 8k paging scheme, at the same time deciding to do away with the copy and paste of holding on to ROM data.
2017-03-18 15:04:01 -04:00
Thomas Harte
36b58d03b7
Formalised read bus value guarantee from the 6502, fixed missing clock signal wiring on the Atari cartridge class, reintroduced CommaVid support.
2017-03-18 14:46:46 -04:00
Thomas Harte
7958459db9
In theory unpaged cartridges should now work. Time to debug.
2017-03-18 14:01:04 -04:00
Thomas Harte
14a76af0d3
Started trying to float out bus control to cartridges.
2017-03-17 20:28:07 -04:00
Thomas Harte
afbd9fd41b
Fixed declared line length.
2017-03-14 21:33:38 -04:00
Thomas Harte
7302703039
Implemented the Activision stack paging scheme.
2017-03-14 20:24:05 -04:00
Thomas Harte
97a8a96593
Rejigged how the memory map is handled and implemented MNetwork support.
2017-03-14 20:07:54 -04:00
Thomas Harte
3b29276228
Implemented the MegaBoy paging scheme.
2017-03-14 17:40:01 -04:00
Thomas Harte
b3632a4e86
Institutes CBS RAM Plus emulation.
2017-03-14 17:25:10 -04:00
Thomas Harte
f0d944847b
Fixed setting of the second 1kb.
2017-03-11 18:16:29 -05:00
Thomas Harte
add14fb43a
Made an attempt to implement Tigervision paging.
2017-03-11 17:44:35 -05:00
Thomas Harte
33bda2d40c
Switched to image inspection for RAM guesses rather than disassembly. Which fixes the other Parker Bros titles.
2017-03-11 13:04:23 -05:00
Thomas Harte
2b5e3a600e
Made a first attempt at implementing the Parker Bros pager within the emulation.
2017-03-11 12:43:12 -05:00
Thomas Harte
9c72ce5bd2
Ensured a settling delay is permitted before an NTSC/PAL decision is made. To avoid false switches just due to startup.
2017-03-06 19:37:35 -05:00
Thomas Harte
79784a8e57
Followed tip: missiles are locked to the position after four output pixels, not four input pixels.
2017-03-04 22:23:50 -05:00
Thomas Harte
4751615623
Fixed NTSC colour cycle count, and hence the 2600's reported line lengths and phase offset.
2017-03-04 17:31:39 -05:00
Thomas Harte
d3257c345a
Tested against public ROMs and corrected. Also moved the deferred adjustment into a more canonical place.
2017-03-04 17:00:28 -05:00
Thomas Harte
837cccdf83
Switched to deferred updates for the 6532.
2017-03-04 14:58:28 -05:00
Thomas Harte
93d1573481
Added a fix for certain homebrews.
2017-03-01 07:59:25 -05:00
Thomas Harte
893a5dd007
Added an artificial low pass filter, attempting to capture post-digital effects.
2017-02-28 21:29:55 -05:00
Thomas Harte
06dd98b23c
Pulled the reset time for horizontal blank extend up to position 224.
2017-02-28 20:28:54 -05:00
Thomas Harte
184c8ae707
Extended to emulate the CommaVid.
2017-02-27 20:50:59 -05:00
Thomas Harte
9d7985c1e1
Added Super Chip emulation.
2017-02-26 17:47:29 -05:00
Thomas Harte
e6a84fd26b
Attempted a hardware-correct implementation of missile-to-player latching. This completes the last of the **knowing** inaccuracies. The rest are as-of-yet unwitting.
2017-02-26 15:12:31 -05:00
Thomas Harte
440467ea3e
Started communicating which copy is being requested.
2017-02-26 13:39:25 -05:00
Thomas Harte
98376de9ad
Started returning 'no effect' for pot ports, rather than doing nothing. Still very much TODO though.
2017-02-25 22:58:58 -05:00
Thomas Harte
e61e355251
Moved to the maximum possibly required queue length of 4. Though the emulated 2600 should never need more than 2 slots as per the current calling pattern, it's not a contractual guarantee.
2017-02-25 17:25:10 -05:00
Thomas Harte
c898c8a99e
Ensured the missiles and ball don't attempt to enqueue. Because I don't think they're supposed to.
2017-02-25 17:13:22 -05:00
Thomas Harte
8c9062857c
Added a single-slot queue for player objects to defer drawing, thereby deferring pixel lookup. Which I think is correct. Though more slots might be needed.
2017-02-25 17:10:24 -05:00
Thomas Harte
77ed4ddc05
Slightly simplified ready line release logic.
2017-02-23 21:08:32 -05:00
Thomas Harte
82f392fada
This should be the other way around. I want whichever is later.
2017-02-22 21:54:49 -05:00
Thomas Harte
8291a63d5f
Fixed loss of audio when switching to PAL.
2017-02-22 21:15:37 -05:00
Thomas Harte
6120dae61a
While I'm using the hacky approach to player/missile synchronisation, I need to seed adder.
2017-02-22 07:39:11 -05:00
Thomas Harte
4f5f191cd6
Fixed: will no longer attempt to output pixels from before the pixel part of a line on which sync was disabled abruptly.
2017-02-22 07:33:36 -05:00
Thomas Harte
21abf4e9fc
Enshrined a terminology switch, albeit without any flow change behind it.
2017-02-22 07:29:48 -05:00
Thomas Harte
144d6b70d9
Minor cleaning.
2017-02-22 07:14:30 -05:00
Thomas Harte
b769f22ca0
Switched back to the collision_buffer_ being part of the TIA object, added one more assert.
2017-02-21 22:26:20 -05:00
Thomas Harte
7019d396d0
Threw in some asserts, discovering a bug in missile positioning.
2017-02-21 22:04:27 -05:00
Thomas Harte
f4447fd9cd
Attempted to fix failure of sprites properly to wrap when performing motion.
2017-02-21 21:53:09 -05:00
Thomas Harte
36396b3d62
Made a slightly better, albeit still inaccurate, version of missile-player lock.Enough for Combat to do reasonable things.
2017-02-21 20:45:20 -05:00
Thomas Harte
d1dbf8c21f
Missile to player lock is supposed to be a toggle; also factored out the commonalities of missile and ball drawing.
2017-02-21 07:58:37 -05:00
Thomas Harte
1bde0fed6f
Simplified relationship between Objects and the usage-specific components through inheritance.
2017-02-21 07:37:20 -05:00
Thomas Harte
7ab2358bba
Made an attempt to reintroduce missiles.
2017-02-20 22:22:39 -05:00
Thomas Harte
99547181f1
Attempted to template this thing. Without yet a plan in place for pixel lookup timing.
2017-02-20 21:42:59 -05:00
Thomas Harte
2bf784535c
Simplified calllng.
2017-02-20 18:04:40 -05:00
Thomas Harte
57f434c199
Reorganised state, with an eye towards unifying object motion and triggers.
2017-02-20 17:58:28 -05:00
Thomas Harte
99a35266e1
Attempted to bring frequency-switching logic into the cross-platform realm. Which for now creates an issue with the OpenGL context.
2017-02-19 21:20:37 -05:00
Thomas Harte
51bcaea60c
Disabled incorrect 'optimisations'.
2017-02-19 12:00:04 -05:00
Thomas Harte
e00339ef0a
Attempted to reintroduce the ball.
2017-02-19 08:02:54 -05:00
Thomas Harte
53cd125712
Added stub calls to draw the missiles and ball.
2017-02-19 07:28:24 -05:00
Thomas Harte
04693b067c
Fixed failure of the optimised route to pump the pixel clock; removed optimisation entirely for now.
2017-02-18 21:36:48 -05:00
Thomas Harte
cd7876a746
Reintroduced the extra clocking delay.
2017-02-18 20:18:50 -05:00
Thomas Harte
ed5ff49ef5
Fixed vertical delay, retreated from my previous thought about adding the one extra cycle of sprite delay, at least temporarily.
2017-02-16 20:52:01 -05:00
Thomas Harte
8d502a0b03
Decided not to run before I can walk and switched to storing the motion time and next step explicitly per object.
2017-02-16 20:28:37 -05:00
Thomas Harte
5ea232310f
Added a check against negative runs.
2017-02-16 18:55:58 -05:00
Thomas Harte
09309aa74f
Attempted to prevent extraneous moves.
2017-02-16 18:52:39 -05:00
Thomas Harte
b5357860b9
Made an attempt to split things apart so as to be able to introduce the proper sprite latency.
2017-02-14 20:56:16 -05:00
Thomas Harte
cd90118a0f
Added two, extraordinarily simple tests.
2017-02-12 20:32:53 -05:00
Thomas Harte
25776de59d
I think unit testing this thing is the only way forwards. Started adding appropriate hooks.
2017-02-12 19:55:02 -05:00
Thomas Harte
600bdc9af7
In C++, I think the implicit cast to bool negates the need for any manual collapsing?
2017-02-12 18:18:35 -05:00
Thomas Harte
0c9be2b09e
Shunted the collisions buffer onto a separate area of the heap for the time being, as a debugging aid. Also added a few more initial values.
2017-02-12 18:16:50 -05:00
Thomas Harte
df8a5cbe6d
Made attempts (i) to respect the delay flag; and (ii) to account for border-region sprite clocking.
2017-02-12 17:35:09 -05:00
Thomas Harte
9ce68c38ae
Made an effort to implement proper pixel output for sprites.
2017-02-12 14:01:50 -05:00
Thomas Harte
40954d6a2a
Attempted to factor out parts I expect to reuse for missiles and the ball.
2017-02-12 11:31:17 -05:00
Thomas Harte
ac444a3f34
Corrected both position increments and target time calculation.
2017-02-11 21:24:14 -05:00
Thomas Harte
b8abeced6d
Made an attempt to introduce the proper eventful loop for player output. With debugging yet to occur.
2017-02-11 21:01:58 -05:00
Thomas Harte
aeff59addc
Implemented motion 'correctly', for programs written to do all work outside of the pixel area.
2017-02-11 20:25:49 -05:00
Thomas Harte
aff69dbc34
Resolved spurious static analyser issue; screen mode will always be 0–6 but it doesn't know that. Setting a non-zero divider doesn't feel worth worrying about for a cleaner compile.
2017-02-11 13:35:22 -05:00
Thomas Harte
6381e4e1b0
All that's happened to position is that numbers have been added to it. So it can't be negative, given that it wasn't before. So a regular modulo will do.
2017-02-11 13:34:36 -05:00
Thomas Harte
905ed1f87b
Switched to the more natural type, which is also signed, making my logic less prone to error.
2017-02-11 13:16:53 -05:00
Thomas Harte
8de6caf6ff
Started trying to get into a proper structure here. Chickened out.
2017-02-11 12:59:13 -05:00
Thomas Harte
40d3f5f7f6
Attempted properly to respect start
.
2017-02-11 08:26:09 -05:00
Thomas Harte
64d5712d1d
Added an incorrectly-coded version of horizontal move, at least so that I can verify that information is going into the correct slots.
2017-02-10 07:23:43 -05:00
Thomas Harte
3b20d862f0
Made an initial attempt to mark sprite positions. But without hmove implemented, they're all over the place.
2017-02-09 20:53:42 -05:00
Thomas Harte
2e9ef2b0ef
Took a shot at reinstating the horizontal blank extend flag.
2017-02-09 18:37:19 -05:00