new VariantKind to the MCSymbolExpr seems like overkill, but I'm not sure
there's a more straightforward way to get the printing difference captured.
(i.e., x86 uses @PLT, ARM uses (PLT)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114613 91177308-0d34-0410-b5e6-96231b3b80d8
CombineTo to avoid putting the result on the worklist. I don't think it makes
much difference for now, but it might help someday as we add more DAG
combine optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114595 91177308-0d34-0410-b5e6-96231b3b80d8
of those. Refactor to share code for handling BUILD_VECTOR(VMOVRRD).
I don't have a testcase that exercises this, but it seems like an obvious
good thing to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114589 91177308-0d34-0410-b5e6-96231b3b80d8
passed the root of the match, even though only a few patterns
actually needed this (one in X86, several in ARM [which should
be refactored anyway], and some in CellSPU that I don't feel
like detangling). Instead of requiring all ComplexPatterns to
take the dead root, have targets opt into getting the root by
putting SDNPWantRoot on the ComplexPattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114471 91177308-0d34-0410-b5e6-96231b3b80d8
I am unable to write a test for this case, help is solicited, though...
What I did is to tickle the code in the debugger and verify that we do the right thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114430 91177308-0d34-0410-b5e6-96231b3b80d8
into OptimizeCompareInstr.
This necessitates the passing of CmpValue around,
so widen the virtual functions to accomodate.
No functionality changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114428 91177308-0d34-0410-b5e6-96231b3b80d8
between the high and low registers for prologue/epilogue code. This was
a Darwin-only thing that wasn't providing a realistic benefit anymore.
Combining the save areas simplifies the compiler code and results in better
ARM/Thumb2 codegen.
For example, previously we would generate code like:
push {r4, r5, r6, r7, lr}
add r7, sp, #12
stmdb sp!, {r8, r10, r11}
With this change, we combine the register saves and generate:
push {r4, r5, r6, r7, r8, r10, r11, lr}
add r7, sp, #12
rdar://8445635
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114340 91177308-0d34-0410-b5e6-96231b3b80d8
value should be in GPRs when it's going to be used as a scalar, and we use
VMOVRRD to make that happen, but if the value is converted back to a vector
we need to fold to a simple bit_convert. Radar 8407927.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114233 91177308-0d34-0410-b5e6-96231b3b80d8
functions in ARMBaseInfo.h so it can be used in the MC library as well.
For anything bigger than this, we may want a means to have a small support
library for shared helper functions like this. Cross that bridge when we
come to it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114016 91177308-0d34-0410-b5e6-96231b3b80d8
VFP instructions use it for loading some constants, so implement that
handling.
Not thrilled with adding a member to MCOperand, but not sure there's much of
a better option that's not pretty fragile (like putting a double in the
union instead and just assuming that's good enough). Suggestions welcome...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113996 91177308-0d34-0410-b5e6-96231b3b80d8
Recognize VLD1q64Pseudo as a stack slot load.
Reject these if they are loading or storing a subregister. The API (and
VirtRegRewriter) doesn't know how to deal with that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113985 91177308-0d34-0410-b5e6-96231b3b80d8
encountered while building llvm-gcc for arm. This is probably the same issue
that the ppc buildbot hit. llvm::prior works on a MachineBasicBlock::iterator,
not a plain MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113983 91177308-0d34-0410-b5e6-96231b3b80d8
backing out following to get it back to green,
so I can investigate in peace:
svn merge -c -113840 llvm/test/CodeGen/ARM/arm-and-tst-peephole.ll
svn merge -c -113876 -c -113839 llvm/lib/Target/ARM/ARMBaseInstrInfo.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113980 91177308-0d34-0410-b5e6-96231b3b80d8
"The register specified for a dregpair is the corresponding Q register, so to
get the pair, we need to look up the sub-regs based on the qreg. Create a
lookup function since we don't have access to TargetRegisterInfo here to
be able to use getSubReg(ARM::dsub_[01])."
Additionaly, fix the NEON VLD1* and VST1* instruction patterns not to use
the dregpair modifier for the 2xdreg versions. Explicitly specifying the two
registers as operands is more correct and more consistent with the other
instruction patterns. This enables further cleanup of special case code in the
disassembler as a nice side-effect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113903 91177308-0d34-0410-b5e6-96231b3b80d8
get the pair, we need to look up the sub-regs based on the qreg. Create a
lookup function since we don't have access to TargetRegisterInfo here to
be able to use getSubReg(ARM::dsub_[01]).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113875 91177308-0d34-0410-b5e6-96231b3b80d8
an argument, so that we can distinguish instructions with the same register
classes but different numbers of registers (e.g., vld3 and vld4). Fix some
of the non-pseudo NEON ld/st instruction itineraries to reflect the number
of registers loaded or stored, not just the opcode name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113854 91177308-0d34-0410-b5e6-96231b3b80d8
by morphing the 'and' to its recording form 'andS'.
This is basically a test commit into this area, to
see whether the bots like me. Several generalizations
can be applied and various avenues of code simplification
are open. I'll introduce those as I go.
I am aware of stylistic input from Bill Wendling, about
where put the analysis complexity, but I am positive
that we can move things around easily and will find a
satisfactory solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113839 91177308-0d34-0410-b5e6-96231b3b80d8
pseudo-instruction approach. Change ARMExpandPseudoInsts to use a table
to record all the NEON load/store information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113812 91177308-0d34-0410-b5e6-96231b3b80d8
the end of the line on a parser error, allowing skipping to happen
for syntactic errors but not for semantic errors. Before we would
miss emitting a diagnostic about the second line, because we skipped
it due to the semantic error on the first line:
foo %eax
bar %al
This fixes rdar://8414033 - llvm-mc ignores lines after an invalid instruction mnemonic errors
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113688 91177308-0d34-0410-b5e6-96231b3b80d8
the 'zero' bit down into the back-end. There are other cases where this logic
isn't sufficient, so they should be handled separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113665 91177308-0d34-0410-b5e6-96231b3b80d8
iterator when an optimization took place. This allows us to do more insane
things with the code than just remove an instruction or two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113640 91177308-0d34-0410-b5e6-96231b3b80d8
to use AddrMode4, there was a count of the registers stored in one of the
operands. I changed that to just count the operands but forgot to adjust for
the size of D registers. This was noticed by Evan as a performance problem
but it is a potential correctness bug as well, since it is possible that this
could merge a base update with a non-matching immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113576 91177308-0d34-0410-b5e6-96231b3b80d8
take multiple cycles to decode.
For the current if-converter clients (actually only ARM), the instructions that
are predicated on false are not nops. They would still take machine cycles to
decode. Micro-coded instructions such as LDM / STM can potentially take multiple
cycles to decode. If-converter should take treat them as non-micro-coded
simple instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113570 91177308-0d34-0410-b5e6-96231b3b80d8
instruction in the class would be decoded to. Or zero if the number of
uOPs must be determined dynamically.
This will be used to determine the cost-effectiveness of predicating a
micro-coded instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113513 91177308-0d34-0410-b5e6-96231b3b80d8
the VST pseudos. The VLD/VST scheduling still needs work (see pr6722), but
at least we shouldn't confuse the loads with the stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113473 91177308-0d34-0410-b5e6-96231b3b80d8
operand from the pseudo instruction to the new instruction as an implicit use.
This will preserve any other flags (e.g., kill) on the operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113456 91177308-0d34-0410-b5e6-96231b3b80d8
for integer and fp constants. Implement todo to use vfp3 instructions
to materialize easy constants if we can.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113453 91177308-0d34-0410-b5e6-96231b3b80d8
For VLD3/VLD4 with double-spaced registers, add the implicit use of the
super register for both the instruction loading the even registers and the
instruction loading the odd registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113452 91177308-0d34-0410-b5e6-96231b3b80d8
option to disable base pointer usage, pay attention to it when deciding
if we can realign (if no base pointer and VLAs, we can't).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113366 91177308-0d34-0410-b5e6-96231b3b80d8
register must be one of the destination registers for the load. Otherwise,
the tLDM instruction will write-back to the base register, which isn't what's
desired (otherwise, we'd have a t2LDM_UPD instead).
rdar://8394087
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113297 91177308-0d34-0410-b5e6-96231b3b80d8
of a mneumonic, report operand errors with better location
info. For example, we now report:
t.s:6:14: error: invalid operand for instruction
cwtl $1
^
but we fail for common cases like:
t.s:11:4: error: invalid operand for instruction
addl $1, $1
^
because we don't know if this is supposed to be the reg/imm or imm/reg
form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113178 91177308-0d34-0410-b5e6-96231b3b80d8
into the middle of the class, and rework how the different sections of
the generated file are conditionally included for simplicity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113163 91177308-0d34-0410-b5e6-96231b3b80d8
"For ARM stack frames that utilize variable sized objects and have either
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs."
r112986 fixed a latent bug exposed by the above.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112989 91177308-0d34-0410-b5e6-96231b3b80d8
alignment should be performed. Otherwise dynamic realignment may trigger
when the register allocator has already used the frame pointer as a general
purpose register. That is, we need to make sure that the list of reserved
registers doesn't change after register allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112986 91177308-0d34-0410-b5e6-96231b3b80d8
instructions prior to regalloc. Since it's getting a little close to
the 2.8 branch deadline, I'll have to leave the rest of the instructions
handled by the NEONPreAllocPass for now, but I didn't want to leave half
of the VLD instructions converted and the other half not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112983 91177308-0d34-0410-b5e6-96231b3b80d8
vabd intrinsic and add and/or zext operations. In the case of vaba, this
also avoids the need for a DAG combine pattern to combine vabd with add.
Update tests. Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112941 91177308-0d34-0410-b5e6-96231b3b80d8
