These are aliases for VACGT and VACGE, respectively, with the source
operands reversed.
rdar://13638090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179575 91177308-0d34-0410-b5e6-96231b3b80d8
Two return types are not equivalent if one is a pointer and the other is an
integral. This is because we cannot bitcast a pointer to an integral value.
PR15185
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179569 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the assembler to recognize $fcc0
as a valid register for conditional move instructions.
Corresponding test cases have been added.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179567 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of emitting config values in a predefined order, the code
emitter will now emit a 32-bit register index followed by the 32-bit
config value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179546 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition
registers, the spill location is specified relative to the stack pointer (SP +
8). However, this is not relative to the SP after the new stack frame is
established, but instead relative to the caller's stack pointer (it is stored
into the linkage area of the parent's stack frame).
So, like with the link register, we don't directly spill the CRs with other
callee-saved registers, but just mark them to be spilled during prologue
generation.
In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
One performs: (X == 13 | X == 14) -> X-13 <u 2
The other: (A == C1 || A == C2) -> (A & ~(C1 ^ C2)) == C1
The problem is that there are certain values of C1 and C2 that
trigger both transforms but the first one blocks out the second,
this generates suboptimal code.
Reordering the transforms should be better in every case and
allows us to do interesting stuff like turn:
%shr = lshr i32 %X, 4
%and = and i32 %shr, 15
%add = add i32 %and, -14
%tobool = icmp ne i32 %add, 0
into:
%and = and i32 %X, 240
%tobool = icmp ne i32 %and, 224
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179493 91177308-0d34-0410-b5e6-96231b3b80d8
This is the default model for non-PIC 64-bit code. It supports
text+data+bss linked anywhere in the low 16 TB of the address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179473 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, only abs32 and pic32 are implemented. Add a test case for
abs32 with 64-bit code. 64-bit PIC code is currently broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179463 91177308-0d34-0410-b5e6-96231b3b80d8
This is basically the same fix in three different places. We use a set to avoid
walking the whole tree of a big ConstantExprs multiple times.
For example: (select cmp, (add big_expr 1), (add big_expr 2))
We don't want to visit big_expr twice here, it may consist of thousands of
nodes.
The testcase exercises this by creating an insanely large ConstantExprs out of
a loop. It's questionable if the optimizer should ever create those, but this
can be triggered with real C code. Fixes PR15714.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179458 91177308-0d34-0410-b5e6-96231b3b80d8
For functions that need to spill CRs, and have dynamic stack allocations, the
value of the SP during the restore is not what it was during the save, and so
we need to use the FP in these cases (as for all of the other spills and
restores, but the CR restore has a special code path because its reserved slot,
like the link register, is specified directly relative to the adjusted SP).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179457 91177308-0d34-0410-b5e6-96231b3b80d8
The register allocator expects minimal physreg live ranges. Schedule
physreg copies accordingly. This is slightly tricky when they occur in
the middle of the scheduling region. For now, this is handled by
rescheduling the copy when its associated instruction is
scheduled. Eventually we may instead bundle them, but only if we can
preserve the bundles as parallel copies during regalloc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179449 91177308-0d34-0410-b5e6-96231b3b80d8
We are now able to handle big endian macho files in llvm-readobject. Thanks to
David Fang for providing the object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179440 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.
This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179398 91177308-0d34-0410-b5e6-96231b3b80d8
These tests rely specifically on the names of ELF relocations, let alone any
other detail. There's no way they'd work if LLVM was emitting something else by
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179376 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out some platforms (e.g. Windows) lay out their llvm-mc slightly
differently with extra newlines; there was no real reason for the test lines to
be consecutive, so this relaxes the FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179375 91177308-0d34-0410-b5e6-96231b3b80d8
This test ensures that relocation type names returned by libObject match
the raw relocation type value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179360 91177308-0d34-0410-b5e6-96231b3b80d8
When debugging performance regressions we often ask ourselves if the regression
that we see is due to poor isel/sched/ra or due to some micro-architetural
problem. When comparing two code sequences one good way to rule out front-end
bottlenecks (and other the issues) is to force code alignment. This pass adds
a flag that forces the alignment of all of the basic blocks in the program.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179353 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Print more information about relocations.
With this patch llvm-readobj now prints if a relocation is pcrel, its length,
if it is extern and if it is scattered.
It also refactors the code a bit to use bit fields instead of shifts and
masks all over the place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179345 91177308-0d34-0410-b5e6-96231b3b80d8
Added PathAliases to check if two struct-path tags can alias.
Added command line option -struct-path-tbaa.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179337 91177308-0d34-0410-b5e6-96231b3b80d8
With this patch llvm-readobj now prints if a relocation is pcrel, its length,
if it is extern and if it is scattered.
It also refactors the code a bit to use bit fields instead of shifts and
masks all over the place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179294 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to collapse sequences of insertelement/extractelement
instructions into single shuffle instructions, there is one specific
case where the Instruction Combiner wrongly updates the resulting
Mask of shuffle indexes.
The problem is in function CollectShuffleElments.
If we have a sequence of insert/extract element instructions
like the one below:
%tmp1 = extractelement <4 x float> %LHS, i32 0
%tmp2 = insertelement <4 x float> %RHS, float %tmp1, i32 1
%tmp3 = extractelement <4 x float> %RHS, i32 2
%tmp4 = insertelement <4 x float> %tmp2, float %tmp3, i32 3
Where:
. %RHS will have a mask of [4,5,6,7]
. %LHS will have a mask of [0,1,2,3]
The Mask of shuffle indexes is wrongly computed to [4,1,6,7]
instead of [4,0,6,7].
When analyzing %tmp2 in order to compute the Mask for the
resulting shuffle instruction, the algorithm forgets to update
the mask index at position 1 with the index associated to the
element extracted from %LHS by instruction %tmp1.
Patch by Andrea DiBiagio!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179291 91177308-0d34-0410-b5e6-96231b3b80d8
As packed comparisons in AVX/SSE produce all 0s or all 1s in each SIMD lane,
vector select could be simplified to AND/OR or removed if one or both values
being selected is all 0s or all 1s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179267 91177308-0d34-0410-b5e6-96231b3b80d8
As these two instructions in AVX extension are privileged instructions for
special purpose, it's only expected to be used in inlined assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179266 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is revised based on patch from Victor Umansky
<victor.umansky@intel.com>. More cases are handled in X86's bool
simplification, i.e.
- SETCC_CARRY
- value is truncated to i1 with AND
As a by-product, PR5443 is also fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179265 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179240 91177308-0d34-0410-b5e6-96231b3b80d8
In the simple and triangle if-conversion cases, when CopyAndPredicateBlock is
used because the to-be-predicated block has other predecessors, we need to
explicitly remove the old copied block from the successors list. Normally if
conversion relies on TII->AnalyzeBranch combined with BB->CorrectExtraCFGEdges
to cleanup the successors list, but if the predicated block contained an
un-analyzable branch (such as a now-predicated return), then this will fail.
These extra successors were causing a problem on PPC because it was causing
later passes (such as PPCEarlyReturm) to leave dead return-only basic blocks in
the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179227 91177308-0d34-0410-b5e6-96231b3b80d8
temporarily while we work on plumbing through some changes to continue
supporting gdb on darwin.
This reverts commit r179122.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179222 91177308-0d34-0410-b5e6-96231b3b80d8
to disable following tests for Hexagon that require direct object
generation support.
DebugInfo/dwarf-public-names.ll
DebugInfo/dwarf-version.ll
DebugInfo/member-pointers.ll
DebugInfo/namespace.ll
DebugInfo/two-cus-from-same-file.ll
Fixes bug 15616 - http://llvm.org/bugs/show_bug.cgi?id=15616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179209 91177308-0d34-0410-b5e6-96231b3b80d8
Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this
would happen as long as floating point instructions are not needed.
Probably it would also make sense to compile as mips32 if atomic operations
are needed too. There may be other cases too.
A module pass prescans the IR and adds the mips16 or nomips16 attribute
to functions depending on the functions needs.
Mips 16 mode can result in a 40% code compression by utililizing 16 bit
encoding of many instructions.
The hope is for this to replace the traditional gcc way of dealing with
Mips16 code using floating point which involves essentially using soft float
but with a library implemented using mips32 floating point. This gcc
method also requires creating stubs so that Mips32 code can interact with
these Mips 16 functions that have floating point needs. My conjecture is
that in reality this traditional gcc method would never win over this
new method.
I will be implementing the traditional gcc method also. Some of it is already
done but I needed to do the stubs to finish the work and those required
this mips16/32 mixed mode capability.
I have more ideas for to make this new method much better and I think the old
method will just live in llvm for anyone that needs the backward compatibility
but I don't for what reason that would be needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I did a local comparison between using bash and using lit's runner, and
more of the suite passes with lit than passes with bash. Most of the
bash failures have to do with /dev/null, which is nonsensical on
Windows, but the lit runner handles it.
The lit shell runner is also much faster than bash, so I would expect
most Windows devs would want it by default.
The behavior can be overridden on any OS by setting
LIT_USE_INTERNAL_SHELL to 0 or 1 in the environment.
Reviewers: chapuni, ddunbar
CC: llvm-commits, timurrrr
Differential Revision: http://llvm-reviews.chandlerc.com/D559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179173 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
Depending on the number of bits set in the writemask.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179166 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179165 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179164 91177308-0d34-0410-b5e6-96231b3b80d8
Modifier 'D' is to use the second word of a double integer.
We had previously implemented the pure register varient of
the modifier and this patch implements the memory reference.
#include "stdio.h"
int b[8] = {0,1,2,3,4,5,6,7};
void main()
{
int i;
// The first word. Notice, no 'D'
{asm (
"lw %0,%1;"
: "=r" (i)
: "m" (*(b+4))
);}
printf("%d\n",i);
// The second word
{asm (
"lw %0,%D1;"
: "=r" (i)
: "m" (*(b+4))
);}
printf("%d\n",i);
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179135 91177308-0d34-0410-b5e6-96231b3b80d8
This enables us to form predicated branches (which are the same conditional
branches we had before) and also a larger set of predicated returns (including
instructions like bdnzlr which is a conditional return and loop-counter
decrement all in one).
At the moment, if conversion does not capture all possible opportunities. A
simple example is provided in early-ret2.ll, where if conversion forms one
predicated return, and then the PPCEarlyReturn pass picks up the other one. So,
at least for now, we'll keep both mechanisms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179134 91177308-0d34-0410-b5e6-96231b3b80d8
and mips16 on a per function basis.
Because this patch is somewhat involved I have provide an overview of the
key pieces of it.
The patch is written so as to not change the behavior of the non mixed
mode. We have tested this a lot but it is something new to switch subtargets
so we don't want any chance of regression in the mainline compiler until
we have more confidence in this.
Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1.
For that reason there are derived versions of the register info, frame info,
instruction info and instruction selection classes.
Now we register three separate passes for instruction selection.
One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then
one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and
MipsSEISelDAGToDAG.cpp).
When the ModuleISel pass runs, it determines if there is a need to switch
subtargets and if so, the owning pointers in MipsTargetMachine are
appropriately changed.
When 16Isel or SEIsel is run, they will return immediately without doing
any work if the current subtarget mode does not apply to them.
In addition, MipsAsmPrinter needs to be reset on a function basis.
The pass BasicTargetTransformInfo is substituted with a null pass since the
pass is immutable and really needs to be a function pass for it to be
used with changing subtargets. This will be fixed in a follow on patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179117 91177308-0d34-0410-b5e6-96231b3b80d8
therefore not at all) of the pc or statement list. We also don't
need to emit the compilation dir so save so space and time
and don't bother.
Fix up the testcase accordingly and verify that we don't emit
the attributes or the items that they use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179114 91177308-0d34-0410-b5e6-96231b3b80d8
This pattern occurs in SROA output due to the way vector arguments are lowered
on ARM.
The testcase from PR15525 now compiles into this, which is better than the code
we got with the old scalarrepl:
_Store:
ldr.w r9, [sp]
vmov d17, r3, r9
vmov d16, r1, r2
vst1.8 {d16, d17}, [r0]
bx lr
Differential Revision: http://llvm-reviews.chandlerc.com/D647
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179106 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, non-vector loads and stores have r+i forms; however, in functions
with large stack frames these were not being used to access slots far from the
stack pointer because such slots were out of range for the signed 16-bit
immediate offset field. This increases register pressure because we need a
separate register for each offset (when the r+r form is used). By enabling
virtual base registers, we can deal with large stack frames without unduly
increasing register pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179105 91177308-0d34-0410-b5e6-96231b3b80d8
Some translations here are not 1x1 because there are grep|grep
chains that are non-trivial to implement in terms of FileCheck features. I
made an effort for the tests to remain as similar as possible; do let me know
if you notice anything fishy. The good news are that some buggy tests were
fixed (grep | not grep - a bug waiting to happen).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179102 91177308-0d34-0410-b5e6-96231b3b80d8
The save area is twice as big and there is no struct return slot. The
stack pointer is always 16-byte aligned (after adding the bias).
Also eliminate the stack adjustment instructions around calls when the
function has a reserved stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179083 91177308-0d34-0410-b5e6-96231b3b80d8
The costs are overfitted so that I can still use the legalization factor.
For example the following kernel has about half the throughput vectorized than
unvectorized when compiled with SSE2. Before this patch we would vectorize it.
unsigned short A[1024];
double B[1024];
void f() {
int i;
for (i = 0; i < 1024; ++i) {
B[i] = (double) A[i];
}
}
radar://13599001
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179033 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC has a conditional branch to the link register (return) instruction: BCLR.
This should be used any time when we'd otherwise have a conditional branch to a
return. This adds a small pass, PPCEarlyReturn, which runs just prior to the
branch selection pass (and, importantly, after block placement) to generate
these conditional returns when possible. It will also eliminate unconditional
branches to returns (these happen rarely; most of the time these have already
been tail duplicated by the time PPCEarlyReturn is invoked). This is a nice
optimization for small functions that do not maintain a stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179026 91177308-0d34-0410-b5e6-96231b3b80d8
I've managed to convince myself that AArch64's acquire/release
instructions are sufficient to guarantee C++11's required semantics,
even in the sequentially-consistent case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179005 91177308-0d34-0410-b5e6-96231b3b80d8
First, we should not cheat: fsel-based lowering of select_cc is a
finite-math-only optimization (the ISA manual, section F.3 of v2.06, makes
this clear, as does a note in our own README).
This also adds fsel-based lowering of EQ and NE condition codes. As it turned
out, fsel generation was covered by a grand total of zero regression test
cases. I've added some test cases to cover the existing behavior (which is now
finite-math only), as well as the new EQ cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179000 91177308-0d34-0410-b5e6-96231b3b80d8
The code in getTypeConversion attempts to promote the element vector type
before it trys to split or widen the vector.
After it failed finding a legal vector type by promoting it would continue using
the promoted vector element type. Thereby missing legal splitted vector types.
For example the type v32i32 that has a legal split of 4 x v3i32 on x86/sse2
would be transformed to: v32i256 and from there on successively split to:
v16i256, v8i256, v1i256 and then finally ends up as an i64 type.
By resetting the vector element type to the original vector element type that
existed before the promotion the code will attempt to split the vector type to
smaller vector widths of the same type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178999 91177308-0d34-0410-b5e6-96231b3b80d8
The fix for PR14972 in r177055 introduced a real think-o in the *store*
side, likely because I was much more focused on the load side. While we
can arbitrarily widen (or narrow) a loaded value, we can't arbitrarily
widen a value to be stored, as that changes the width of memory access!
Lock down the code path in the store rewriting which would do this to
only handle the intended circumstance.
All of the existing tests continue to pass, and I've added a test from
the PR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178974 91177308-0d34-0410-b5e6-96231b3b80d8
a relocation across sections. Do this for DW_AT_stmt list in the
skeleton CU and check the relocations in the debug_info section.
Add a FIXME for multiple CUs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178969 91177308-0d34-0410-b5e6-96231b3b80d8
Integer return values are sign or zero extended by the callee, and
structs up to 32 bytes in size can be returned in registers.
The CC_Sparc64 CallingConv definition is shared between
LowerFormalArguments_64 and LowerReturn_64. Function arguments and
return values are passed in the same registers.
The inreg flag is also used for return values. This is required to handle
C functions returning structs containing floats and ints:
struct ifp {
int i;
float f;
};
struct ifp f(void);
LLVM IR:
define inreg { i32, float } @f() {
...
ret { i32, float } %retval
}
The ABI requires that %retval.i is returned in the high bits of %i0
while %retval.f goes in %f1.
Without the inreg return value attribute, %retval.i would go in %i0 and
%retval.f would go in %f3 which is a more efficient way of returning
%multiple values, but it is not ABI compliant for returning C structs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178966 91177308-0d34-0410-b5e6-96231b3b80d8
64-bit SPARC v9 processes use biased stack and frame pointers, so the
current function's stack frame is located at %sp+BIAS .. %fp+BIAS where
BIAS = 2047.
This makes more local variables directly accessible via [%fp+simm13]
addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178965 91177308-0d34-0410-b5e6-96231b3b80d8
There are certain PPC instructions into which we can fold a zero immediate
operand. We can detect such cases by looking at the register class required
by the using operand (so long as it is not otherwise constrained).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178961 91177308-0d34-0410-b5e6-96231b3b80d8
All arguments are formally assigned to stack positions and then promoted
to floating point and integer registers. Since there are more floating
point registers than integer registers, this can cause situations where
floating point arguments are assigned to registers after integer
arguments that where assigned to the stack.
Use the inreg flag to indicate 32-bit fragments of structs containing
both float and int members.
The three-way shadowing between stack, integer, and floating point
registers requires custom argument lowering. The good news is that
return values are passed in the exact same way, and we can share the
code.
Still missing:
- Update LowerReturn to handle structs returned in registers.
- LowerCall.
- Variadic functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178958 91177308-0d34-0410-b5e6-96231b3b80d8
SITargetLowering::analyzeImmediate() was converting the 64-bit values
to 32-bit and then checking if they were an inline immediate. Some
of these conversions caused this check to succeed and produced
S_MOV instructions with 64-bit immediates, which are illegal.
v2:
- Clean up logic
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178927 91177308-0d34-0410-b5e6-96231b3b80d8
On cores for which we know the misprediction penalty, and we have
the isel instruction, we can profitably perform early if conversion.
This enables us to replace some small branch sequences with selects
and avoid the potential stalls from mispredicting the branches.
Enabling this feature required implementing canInsertSelect and
insertSelect in PPCInstrInfo; isel code in PPCISelLowering was
refactored to use these functions as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178926 91177308-0d34-0410-b5e6-96231b3b80d8
This is the counterpart to commit r160637, except it performs the action
in the bottomup portion of the data flow analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178922 91177308-0d34-0410-b5e6-96231b3b80d8
The normal dataflow sequence in the ARC optimizer consists of the following
states:
Retain -> CanRelease -> Use -> Release
The optimizer before this patch stored the uses that determine the lifetime of
the retainable object pointer when it bottom up hits a retain or when top down
it hits a release. This is correct for an imprecise lifetime scenario since what
we are trying to do is remove retains/releases while making sure that no
``CanRelease'' (which is usually a call) deallocates the given pointer before we
get to the ``Use'' (since that would cause a segfault).
If we are considering the precise lifetime scenario though, this is not
correct. In such a situation, we *DO* care about the previous sequence, but
additionally, we wish to track the uses resulting from the following incomplete
sequences:
Retain -> CanRelease -> Release (TopDown)
Retain <- Use <- Release (BottomUp)
*NOTE* This patch looks large but the most of it consists of updating
test cases. Additionally this fix exposed an additional bug. I removed
the test case that expressed said bug and will recommit it with the fix
in a little bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178921 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization is unstable at this moment; it
1) block us on a very important application
2) PR15200
3) test6 and test7 in test/Transforms/ScalarRepl/dynamic-vector-gep.ll
(the CHECK command compare the output against wrong result)
I personally believe this optimization should not have any impact on the
autovectorized code, as auto-vectorizer is supposed to put gather/scatter
in a "right" way. Although in theory downstream optimizaters might reveal
some gather/scatter optimization opportunities, the chance is quite slim.
For the hand-crafted vectorizing code, in term of redundancy elimination,
load-CSE, copy-propagation and DSE can collectively achieve the same result,
but in much simpler way. On the other hand, these optimizers are able to
improve the code in a incremental way; in contrast, SROA is sort of all-or-none
approach. However, SROA might slighly win in stack size, as it tries to figure
out a stretch of memory tightenly cover the area accessed by the dynamic index.
rdar://13174884
PR15200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178912 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-mips-linux green.
llvm-mips-linux runs on a big endian machine. This test passes if I change 'e'
to 'E' in the target data layout string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178910 91177308-0d34-0410-b5e6-96231b3b80d8
memory operands.
Essentially, this layers an infix calculator on top of the parsing state
machine. The scale on the index register is still expected to be an immediate
__asm mov eax, [eax + ebx*4]
and will not work with more complex expressions. For example,
__asm mov eax, [eax + ebx*(2*2)]
The plus and minus binary operators assume the numeric value of a register is
zero so as to not change the displacement. Register operands should never
be an operand for a multiply or divide operation; the scale*indexreg
expression is always replaced with a zero on the operand stack to prevent
such a case.
rdar://13521380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178881 91177308-0d34-0410-b5e6-96231b3b80d8
InMemoryStruct is extremely dangerous as it returns data from an internal
buffer when the endiannes doesn't match. This should fix the tests on big
endian hosts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178875 91177308-0d34-0410-b5e6-96231b3b80d8
When the RuntimeDyldELF::processRelocationRef routine finds the target
symbol of a relocation in the local or global symbol table, it performs
a section-relative relocation:
Value.SectionID = lsi->second.first;
Value.Addend = lsi->second.second;
At this point, however, any Addend that might have been specified in
the original relocation record is lost. This is somewhat difficult to
trigger for relocations within the code section since they usually
do not contain non-zero Addends (when built with the default JIT code
model, in any case). However, the problem can be reliably triggered
by a relocation within the data section caused by code like:
int test[2] = { -1, 0 };
int *p = &test[1];
The initializer of "p" will need a relocation to "test + 4". On
platforms using RelA relocations this means an Addend of 4 is required.
Current code ignores this addend when processing the relocation,
resulting in incorrect execution.
Fixed by taking the Addend into account when processing relocations
to symbols found in the local or global symbol table.
Tested on x86_64-linux and powerpc64-linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178869 91177308-0d34-0410-b5e6-96231b3b80d8
Pass down the fact that an operand is going to be a vector of constants.
This should bring the performance of MultiSource/Benchmarks/PAQ8p/paq8p on x86
back. It had degraded to scalar performance due to my pervious shift cost change
that made all shifts expensive on x86.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178809 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2 has efficient support for shifts by a scalar. My previous change of making
shifts expensive did not take this into account marking all shifts as expensive.
This would prevent vectorization from happening where it is actually beneficial.
With this change we differentiate between shifts of constants and other shifts.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178808 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombine logic that recognized a/sqrt(b) and transformed it into
a multiplication by the reciprocal sqrt did not handle cases where the
sqrt and the division were separated by an fpext or fptrunc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178801 91177308-0d34-0410-b5e6-96231b3b80d8
It had been dropped during the switch to yaml::IO. Also add a test going
from yaml2obj to llvm-readobj. It can be extended as we add more
fields/formats to yaml2obj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178786 91177308-0d34-0410-b5e6-96231b3b80d8
At the time when the XCore backend was added there were some issues with
with overlapping register classes but these all seem to be fixed now.
Describing the register classes correctly allow us to get rid of a
codegen only instruction (LDAWSP_lru6_RRegs) and it means we can
disassemble ru6 instructions that use registers above r11.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178782 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2SizeReduction pass avoids false CPSR dependencies, except it
still aggressively creates tMOVi8 instructions because they are so
common.
Avoid creating false CPSR dependencies even for tMOVi8 instructions when
the the CPSR flags are known to have high latency. This allows integer
computation to overlap floating point computations.
Also process blocks in a reverse post-order and propagate high-latency
flags to successors.
<rdar://problem/13468102>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178773 91177308-0d34-0410-b5e6-96231b3b80d8
This requires v9 cmov instructions using the %xcc flags instead of the
%icc flags.
Still missing:
- Select floats on %xcc flags.
- Select i64 on %fcc flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178737 91177308-0d34-0410-b5e6-96231b3b80d8
The default logic does not correctly identify costs of casts because they are
marked as custom on x86.
For some cases, where the shift amount is a scalar we would be able to generate
better code. Unfortunately, when this is the case the value (the splat) will get
hoisted out of the loop, thereby making it invisible to ISel.
radar://13130673
radar://13537826
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178703 91177308-0d34-0410-b5e6-96231b3b80d8
Normally r_info is just a 32 of 64 bit number matching the endian of the rest
of the file. Unfortunately, mips 64 bit little endian is special: The top 32
bits are a little endian number and the following 32 are a big endian one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178694 91177308-0d34-0410-b5e6-96231b3b80d8
ELF with support for:
- File headers
- Section headers + data
- Relocations
- Symbols
- Unwind data (only COFF/Win64)
The output format follows a few rules:
- Values are almost always output one per line (as elf-dump/coff-dump already do). - Many values are translated to something readable (like enum names), with the raw value in parentheses.
- Hex numbers are output in uppercase, prefixed with "0x".
- Flags are sorted alphabetically.
- Lists and groups are always delimited.
Example output:
---------- snip ----------
Sections [
Section {
Index: 1
Name: .text (5)
Type: SHT_PROGBITS (0x1)
Flags [ (0x6)
SHF_ALLOC (0x2)
SHF_EXECINSTR (0x4)
]
Address: 0x0
Offset: 0x40
Size: 33
Link: 0
Info: 0
AddressAlignment: 16
EntrySize: 0
Relocations [
0x6 R_386_32 .rodata.str1.1 0x0
0xB R_386_PC32 puts 0x0
0x12 R_386_32 .rodata.str1.1 0x0
0x17 R_386_PC32 puts 0x0
]
SectionData (
0000: 83EC04C7 04240000 0000E8FC FFFFFFC7 |.....$..........|
0010: 04240600 0000E8FC FFFFFF31 C083C404 |.$.........1....|
0020: C3 |.|
)
}
]
---------- snip ----------
Relocations and symbols can be output standalone or together with the section header as displayed in the example.
This feature set supports all tests in test/MC/COFF and test/MC/ELF (and I suspect all additional tests using elf-dump), making elf-dump and coff-dump deprecated.
Patch by Nico Rieck!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178679 91177308-0d34-0410-b5e6-96231b3b80d8
For this we need to use a libcall. Previously LLVM didn't implement
libcall support for frem, so I've added it in the usual
straightforward manner. A test case from the bug report is included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178639 91177308-0d34-0410-b5e6-96231b3b80d8
The same compare instruction is used for 32-bit and 64-bit compares. It
sets two different sets of flags: icc and xcc.
This patch adds a conditional branch instruction using the xcc flags for
64-bit compares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178621 91177308-0d34-0410-b5e6-96231b3b80d8
When unsafe FP math operations are enabled, we can use the fre[s] and
frsqrte[s] instructions, which generate reciprocal (sqrt) estimates, together
with some Newton iteration, in order to quickly generate floating-point
division and sqrt results. All of these instructions are separately optional,
and so each has its own feature flag (except for the Altivec instructions,
which are covered under the existing Altivec flag). Doing this is not only
faster than using the IEEE-compliant fdiv/fsqrt instructions, but allows these
computations to be pipelined with other computations in order to hide their
overall latency.
I've also added a couple of missing fnmsub patterns which turned out to be
missing (but are necessary for good code generation of the Newton iterations).
Altivec needs a similar fix, but that will probably be more complicated because
fneg is expanded for Altivec's v4f32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178617 91177308-0d34-0410-b5e6-96231b3b80d8
This finally fixes the encoding. The patch also
* Removes eh-frame.ll. It was an unnecessary .ll to .o test that was checking
the wrong value.
* Merge fde-reloc.s and eh-frame.s into a single test, since the only difference
was the run lines.
* Don't blindly test the content of the entire .eh_frame section. It makes it
hard to anyone actually fixing a bug and hitting a difference in a binary
blob. Instead, use a CHECK for each field and document what is being checked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178615 91177308-0d34-0410-b5e6-96231b3b80d8
The semantics of ARC implies that a pointer passed into an objc_autorelease
must live until some point (potentially down the stack) where an
autorelease pool is popped. On the other hand, an
objc_autoreleaseReturnValue just signifies that the object must live
until the end of the given function at least.
Thus objc_autorelease is stronger than objc_autoreleaseReturnValue in
terms of the semantics of ARC* implying that performing the given
strength reduction without any knowledge of how this relates to
the autorelease pool pop that is further up the stack violates the
semantics of ARC.
*Even though objc_autoreleaseReturnValue if you know that no RV
optimization will occur is more computationally expensive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178612 91177308-0d34-0410-b5e6-96231b3b80d8
This patch initializes t9 to the handler address, but only if the relocation
model is pic. This handles the case where handler to which eh.return jumps
points to the start of the function.
Patch by Sasa Stankovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178588 91177308-0d34-0410-b5e6-96231b3b80d8
When doing a partword atomic operation, a lwarx was being paired with
a stdcx. instead of a stwcx. when compiling for a 64-bit target. The
target has nothing to do with it in this case; we always need a stwcx.
Thanks to Kai Nacke for reporting the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178559 91177308-0d34-0410-b5e6-96231b3b80d8
This is helps on architectures where i8,i16 are not legal but we have byte, and
short loads/stores. Allowing us to merge copies like the one below on ARM.
copy(char *a, char *b, int n) {
do {
int t0 = a[0];
int t1 = a[1];
b[0] = t0;
b[1] = t1;
radar://13536387
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178546 91177308-0d34-0410-b5e6-96231b3b80d8
The iterator could be invalidated when it's recursively deleting a whole bunch
of constant expressions in a constant initializer.
Note: This was only reproducible if `opt' was run on a `.bc' file. If `opt' was
run on a `.ll' file, it wouldn't crash. This is why the test first pushes the
`.ll' file through `llvm-as' before feeding it to `opt'.
PR15440
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178531 91177308-0d34-0410-b5e6-96231b3b80d8
SPARC v9 extends all ALU instructions to 64 bits, so we simply need to
add patterns to use them for both i32 and i64 values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178527 91177308-0d34-0410-b5e6-96231b3b80d8
The last resort pattern produces 6 instructions, and there are still
opportunities for materializing some immediates in fewer instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178526 91177308-0d34-0410-b5e6-96231b3b80d8
SPARC v9 defines new 64-bit shift instructions. The 32-bit shift right
instructions are still usable as zero and sign extensions.
This adds new F3_Sr and F3_Si instruction formats that probably should
be used for the 32-bit shifts as well. They don't really encode an
simm13 field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178525 91177308-0d34-0410-b5e6-96231b3b80d8
This is far from complete, but it is enough to make it possible to write
test cases using i64 arguments.
Missing features:
- Floating point arguments.
- Receiving arguments on the stack.
- Calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178523 91177308-0d34-0410-b5e6-96231b3b80d8
Revision 177141 caused a regression in all but
mips64 little endian. That is because none of the
other Mips targets had test cases checking the
contents of the .eh_frame section. This patch fixes
both the llvm code and adds an assembler test case
to include the current 4 flavors.
The test cases unfortunately rely on llvm-objdump. A
preferable method would be to use a pretty printer output
such as what readelf -wf <elf_file> would give.
I also changed the name of the test case to correct a typo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178506 91177308-0d34-0410-b5e6-96231b3b80d8
We would also like to merge sequences that involve a variable index like in the
example below.
int index = *idx++
int i0 = c[index+0];
int i1 = c[index+1];
b[0] = i0;
b[1] = i1;
By extending the parsing of the base pointer to handle dags that contain a
base, index, and offset we can handle examples like the one above.
The dag for the code above will look something like:
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i8 load %index))))
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i32 add (i32 signextend (i8 load %index))
(i32 1)))))
The code that parses the tree ignores the intermediate sign extensions. However,
if there is a sign extension it needs to be on all indexes.
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (add (i8 load %index)
(i8 1))))
vs
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i32 add (i32 signextend (i8 load %index))
(i32 1)))))
radar://13536387
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178483 91177308-0d34-0410-b5e6-96231b3b80d8
The P7 and A2 have additional floating-point conversion instructions which
allow a direct two-instruction sequence (plus load/store) to convert from all
combinations (signed/unsigned i32/i64) <--> (float/double) (on previous cores,
only some combinations were directly available).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178480 91177308-0d34-0410-b5e6-96231b3b80d8
The popcntw instruction is available whenever the popcntd instruction is
available, and performs a separate popcnt on the lower and upper 32-bits.
Ignoring the high-order count, this can be used for the 32-bit input case
(saving on the explicit zero extension otherwise required to use popcntd).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178470 91177308-0d34-0410-b5e6-96231b3b80d8
This instruction is available on modern PPC64 CPUs, and is now used
to improve the SINT_TO_FP lowering (by eliminating the need for the
separate sign extension instruction and decreasing the amount of
needed stack space).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178446 91177308-0d34-0410-b5e6-96231b3b80d8
The existing SINT_TO_FP code for i32 -> float/double conversion was disabled
because it relied on broken EXTSW_32/STD_32 instruction definitions. The
original intent had been to enable these 64-bit instructions to be used on CPUs
that support them even in 32-bit mode. Unfortunately, this form of lying to
the infrastructure was buggy (as explained in the FIXME comment) and had
therefore been disabled.
This re-enables this functionality, using regular DAG nodes, but only when
compiling in 64-bit mode. The old STD_32/EXTSW_32 definitions (which were dead)
are removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178438 91177308-0d34-0410-b5e6-96231b3b80d8
'@SECREL' is what is used by the Microsoft assembler, but GNU as expects '@SECREL32'.
With the patch, the MC-generated code works fine in combination with a recent GNU as (2.23.51.20120920 here).
Patch by David Nadlinger!
Differential Revision: http://llvm-reviews.chandlerc.com/D429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178427 91177308-0d34-0410-b5e6-96231b3b80d8
specific code paths.
This allows us to write code like:
if (__nvvm_reflect("FOO"))
// Do something
else
// Do something else
and compile into a library, then give "FOO" a value at kernel
compile-time so the check becomes a no-op.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178416 91177308-0d34-0410-b5e6-96231b3b80d8
Check that instruction selection can select multiply-add/sub DSP instructions
from a pattern that doesn't have intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178406 91177308-0d34-0410-b5e6-96231b3b80d8
derived class MipsSETargetLowering.
We shouldn't be generating madd/msub nodes if target is Mips16, since Mips16
doesn't have support for multipy-add/sub instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178404 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, objc-arc-expand will make sure that the
objc_retainAutoreleasedReturnValue, objc_autoreleaseReturnValue, and ret
will all have %call as an argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178382 91177308-0d34-0410-b5e6-96231b3b80d8
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178369 91177308-0d34-0410-b5e6-96231b3b80d8
Like nearbyint, rint can be implemented on PPC using the frin instruction. The
complication comes from the fact that rint needs to set the FE_INEXACT flag
when the result does not equal the input value (and frin does not do that). As
a result, we use a custom inserter which, after the rounding, compares the
rounded value with the original, and if they differ, explicitly sets the XX bit
in the FPSCR register (which corresponds to FE_INEXACT).
Once LLVM has better modeling of the floating-point environment we should be
able to (often) eliminate this extra complexity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178362 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are available on the P5x (and later) and on the A2. They
implement the standard floating-point rounding operations (floor, trunc, etc.).
One caveat: frin (round to nearest) does not implement "ties to even", and so
is only enabled in fast-math mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178337 91177308-0d34-0410-b5e6-96231b3b80d8
Mips assembler supports macros that allows the OR instruction
to have an immediate parameter. This patch adds an instruction
alias that converts this macro into a Mips ORI instruction.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178316 91177308-0d34-0410-b5e6-96231b3b80d8
- RDRAND always clears the destination value when a random value is not
available (i.e. CF == 0). This value is truncated or zero-extended as
the false boolean value to be returned. Boolean simplification needs
to skip this 'zext' or 'trunc' node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178312 91177308-0d34-0410-b5e6-96231b3b80d8
Mips assembler allows following to be used as aliased instructions:
jal $rs for jalr $rs
jal $rd,$rd for jalr $rd,$rs
This patch provides alias definitions in td files and test cases to show the usage.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178304 91177308-0d34-0410-b5e6-96231b3b80d8
Compiling in 32-bit mode on a P7 would assert after 64-bit DAG combines were
added for bswap with load/store. This is because these combines are really only
valid in 64-bit mode, regardless of the CPU (and this was not being checked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178286 91177308-0d34-0410-b5e6-96231b3b80d8
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178285 91177308-0d34-0410-b5e6-96231b3b80d8
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.
Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.
This patch simplifies said code by:
1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).
2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).
This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178284 91177308-0d34-0410-b5e6-96231b3b80d8
These are 64-bit load/store with byte-swap, and available on the P7 and the A2.
Like the similar instructions for 16- and 32-bit words, these are matched in the
target DAG-combine phase against load/store-bswap pairs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178276 91177308-0d34-0410-b5e6-96231b3b80d8
PPC ISA 2.06 (P7, A2, etc.) has a popcntd instruction. Add this instruction and
tell TTI about it so that popcount-loop recognition will know about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178233 91177308-0d34-0410-b5e6-96231b3b80d8
There were a few places where kill flags were not being set correctly, and
where 32-bit instruction variants were being used with 64-bit registers. After
r178180, this code was being triggered causing llc to assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178220 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 342d92c7a0.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178215 91177308-0d34-0410-b5e6-96231b3b80d8
form of call in preference to memory indirect on Atom.
In this case, the patch applies the optimization to the code for reloading
spilled registers.
The patch also includes changes to sibcall.ll and movgs.ll, which were
failing on the Atom buildbot after the first patch was applied.
This patch by Sriram Murali.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178193 91177308-0d34-0410-b5e6-96231b3b80d8
Made sure we were looking a correct section
Added Mips32/64 as an extra check
Updated llvm-objdump to generate symbolic info for Mips relocations
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178190 91177308-0d34-0410-b5e6-96231b3b80d8
indirect through a memory address is to load the memory address into
a register and then call indirect through the register.
This patch implements this improvement by modifying SelectionDAG to
force a function address which is a memory reference to be loaded
into a virtual register.
Patch by Sriram Murali.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178171 91177308-0d34-0410-b5e6-96231b3b80d8
6 more piglit tests.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178145 91177308-0d34-0410-b5e6-96231b3b80d8
It seems that the Darwin PPC assembler requires r0 to be written as 0 when it
means 0 (at least in lwarx/stwcx.). Fixes PR15605.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178142 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178127 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178126 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178125 91177308-0d34-0410-b5e6-96231b3b80d8
The R0 register can now be allocated because instructions
that cannot use R0 as a GPR have been appropriately marked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178123 91177308-0d34-0410-b5e6-96231b3b80d8
