into their left operand, rather than their right. Do this
by commuting the operands and inverting the condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61842 91177308-0d34-0410-b5e6-96231b3b80d8
avoid the need for spilling, add a new testcase that tests that the
pcmpeqd used for V_SETALLONES is changed to a constant-pool load as
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61831 91177308-0d34-0410-b5e6-96231b3b80d8
converted to LEA64_32r in x86's convertToThreeAddress. This
replaces code like this:
movl %esi, %edi
inc %edi
with this:
lea 1(%rsi), %edi
which appears to be beneficial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61830 91177308-0d34-0410-b5e6-96231b3b80d8
aggregate types. Don't increment the current index after reaching
the end of a struct, as it will already be pointing at
one-past-the end. This fixes PR3288.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61828 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix bugs 3194, 3195: i128 load/stores produce correct code (although, we
need to ensure that i128 is 16-byte aligned in real life), and 128 zero-
extends are supported.
- New td file: SPU128InstrInfo.td: this is where all new i128 support should
be put in the future.
- Continue to hammer on i64 operations and test cases; ensure that the only
remaining problem will be i64 mul.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61784 91177308-0d34-0410-b5e6-96231b3b80d8
AddPseudoTwoAddrDeps. This lets the scheduling infrastructure
avoid recalculating node heights. In very large testcases this
was a major bottleneck. Thanks to Roman Levenstein for finding
this!
As a side effect, fold-pcmpeqd-0.ll is now scheduled better
and it no longer requires spilling on x86-32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61778 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix (brcond (setq ...)) bug, where BRNZ should have been used vice BRZ.
- Kill unused/unnecessary nodes in SPUNodes.td
- Beef out the i64operations.c test harness to use a lot of unaligned
loads, test loops and LLVM loop/basic block optimizations; run the
test harness successfully on real Cell hardware.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61664 91177308-0d34-0410-b5e6-96231b3b80d8
- Remove custom lowering for BRCOND
- Add remaining functionality for branches in SPUInstrInfo, such as branch
condition reversal and load/store folding. Updated BrCond test to reflect
branch reversal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61597 91177308-0d34-0410-b5e6-96231b3b80d8
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61542 91177308-0d34-0410-b5e6-96231b3b80d8
instruction sequence and cannot ordinarily be simplified by DAGcombine
into the various target description files or SPUDAGToDAGISel.cpp.
This makes some 64-bit operations legal.
- Eliminate target-dependent ISD enums.
- Update tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61508 91177308-0d34-0410-b5e6-96231b3b80d8
DAGcombine's ability to find reasons to remove truncates when they were not
needed. Consequently, the CellSPU backend would produce correct, but _really
slow and horrible_, code.
Replaced with instruction sequences that do the equivalent truncation in
SPUInstrInfo.td.
- Re-examine how unaligned loads and stores work. Generated unaligned
load code has been tested on the CellSPU hardware; see the i32operations.c
and i64operations.c in CodeGen/CellSPU/useful-harnesses. (While they may be
toy test code, it does prove that some real world code does compile
correctly.)
- Fix truncating stores in bug 3193 (note: unpack_df.ll will still make llc
fault because i64 ult is not yet implemented.)
- Added i64 eq and neq for setcc and select/setcc; started new instruction
information file for them in SPU64InstrInfo.td. Additional i64 operations
should be added to this file and not to SPUInstrInfo.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61447 91177308-0d34-0410-b5e6-96231b3b80d8
constant shift count that doesn't fit in the shift instruction's
immediate field. This fixes PR3242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61281 91177308-0d34-0410-b5e6-96231b3b80d8
172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61259 91177308-0d34-0410-b5e6-96231b3b80d8
- Use SplitBlockPredecessors to factor out common predecessors of the critical edge destination. This is disabled for now due to some regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61248 91177308-0d34-0410-b5e6-96231b3b80d8
The EH_frame and .eh symbols are now private, except for darwin9 and earlier.
The patch also fixes the definition of PrivateGlobalPrefix on pcc linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61242 91177308-0d34-0410-b5e6-96231b3b80d8
DAGTypeLegalizer::ExpandShiftWithKnownAmountBit.
In terms of restoring the optimization, the best fix here isn't
obvious... any ideas?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61119 91177308-0d34-0410-b5e6-96231b3b80d8
computation code. Also, avoid adding output-depenency edges when both
defs are dead, which frequently happens with EFLAGS defs.
Compute Depth and Height lazily, and always in terms of edge latency
values. For the schedulers that don't care about latency, edge latencies
are set to 1.
Eliminate Cycle and CycleBound, and LatencyPriorityQueue's Latencies array.
These are all subsumed by the Depth and Height fields.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61073 91177308-0d34-0410-b5e6-96231b3b80d8
and insert vector element. Modified extract vector element to extend the
result to match the expected promoted type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61029 91177308-0d34-0410-b5e6-96231b3b80d8
which are identical to the original patterns.
- Change the multiply with overflow so that we distinguish between signed and
unsigned multiplication. Currently, unsigned multiplication with overflow
isn't working!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60963 91177308-0d34-0410-b5e6-96231b3b80d8
for promoted integer types, eg: i16 on ppc-32, or
i24 on any platform. Complete support for arbitrary
precision integers would require handling expanded
integer types, eg: i128, but I couldn't be bothered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60834 91177308-0d34-0410-b5e6-96231b3b80d8
overflow/carry from the "arithmetic with overflow" intrinsics. It searches the
machine basic block from bottom to top to find the SETO/SETC instruction that is
its conditional. If an instruction modifies EFLAGS before it reaches the
SETO/SETC instruction, then it defaults to the normal instruction emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60807 91177308-0d34-0410-b5e6-96231b3b80d8
target-independent way of determining overflow on multiplication. It's very
tricky. Patch by Zoltan Varga!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60800 91177308-0d34-0410-b5e6-96231b3b80d8
essential problem was that the DAG can contain
random unused nodes which were never analyzed.
When remapping a value of a node being processed,
such a node may become used and need to be analyzed;
however due to operands being transformed during
analysis the node may morph into a different one.
Users of the morphing node need to be updated, and
this wasn't happening. While there I added a bunch
of documentation and sanity checks, so I (or some
other poor soul) won't have to scratch their head
over this stuff so long trying to remember how it
was all supposed to work next time some obscure
problem pops up! The extra sanity checking exposed
a few places where invariants weren't being preserved,
so those are fixed too. Since some of the sanity
checking is expensive, I added a flag to turn it
on. It is also turned on when building with
ENABLE_EXPENSIVE_CHECKS=1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60797 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix call.ll and call_indirect.ll expected results, now that it's using a
different pre-register allocation scheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60741 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the shift amount when unrolling a vector shift into scalar shifts.
Fix problem in getShuffleScalarElt where it assumes that the input of
a bit convert must be a vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60740 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in x86 address mode folding. Also, make
getRegForValue return 0 for illegal types even if it has a
ValueMap for them, because Argument values are put in the
ValueMap. This fixes PR3181.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60696 91177308-0d34-0410-b5e6-96231b3b80d8
loops when they can be subsumed into addressing modes.
Change X86 addressing mode check to realize that
some PIC references need an extra register.
(I believe this is correct for Linux, if not, I'm sure
someone will tell me.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60608 91177308-0d34-0410-b5e6-96231b3b80d8
1. GlobalBaseReg may have been spilled.
2. It may not be live at the use.
3. Spiller doesn't know this is happening so it won't prevent GlobalBaseReg from being spilled later (That by itself is a nasty hack. It's needed because we don't insert the reload until later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60595 91177308-0d34-0410-b5e6-96231b3b80d8
aren't part of the test suite but are generally useful nonetheless, and can
be expanded later to test the backend against the actual Cell SPU system.
There's basically no other good place to put this code, so put it here for
the time being.
- vecoperations.c: Vector shuffles for all supported vector types, tests
for v16i8 add and multiply.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60566 91177308-0d34-0410-b5e6-96231b3b80d8
foldMemoryOperand how to "fold" them, by converting them into constant-pool
loads. When they aren't folded, they use xorps/cmpeqd, but for example when
register pressure is high, they may now be folded as memory operands, which
reduces register pressure.
Also, mark V_SET0 isAsCheapAsAMove so that two-address-elimination will
remat it instead of copying zeros around (V_SETALLONES was already marked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60461 91177308-0d34-0410-b5e6-96231b3b80d8
delegates to the regular x86-32 convention which handles byval, but only
after it handles a few cases, and it's necessary to handle byval before
handling those cases. This fixes PR3122 (and rdar://6400815), llvm-gcc
miscompiling LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60453 91177308-0d34-0410-b5e6-96231b3b80d8
1. ppcf128 select is expanded to f64 select's.
2. f64 select operand 0 is an i1 truncate, it's promoted to i32 zero_extend.
3. f64 select is updated. It's changed back to a "NewNode" and being re-analyzed.
4. f64 select operands are being processed. Operand 0 is a "NewNode". It's being expunged out of ReplacedValues map.
5. ExpungeNode tries to remap f64 select and notice it's a "NewNode" and assert.
Duncan, please take a look. Thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60443 91177308-0d34-0410-b5e6-96231b3b80d8
- Incorporate Tilmann Scheller's ISD::TRUNCATE custom lowering patch
- Update SPU calling convention info, even if it's not used yet (but can be
at some point or another)
- Ensure that any-extended f32 loads are custom lowered, especially when
they're promoted for use in printf.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60438 91177308-0d34-0410-b5e6-96231b3b80d8
- LowerXADDO lowers [SU]ADDO into an ADD with an implicit EFLAGS define. The
EFLAGS are fed into a SETCC node which has the conditional COND_O or COND_C,
depending on the type of ADDO requested.
- LowerBRCOND now recognizes if it's coming from a SETCC node with COND_O or
COND_C set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60388 91177308-0d34-0410-b5e6-96231b3b80d8
figuring out the base of the IV. This produces better
code in the example. (Addresses use (IV) instead of
(BASE,IV) - a significant improvement on low-register
machines like x86).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60374 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix v2[if]64 vector insertion code before IBM files a bug report.
- Ensure that zero (0) offsets relative to $sp don't trip an assert
(add $sp, 0 gets legalized to $sp alone, tripping an assert)
- Shuffle masks passed to SPUISD::SHUFB are now v16i8 or v4i32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60358 91177308-0d34-0410-b5e6-96231b3b80d8
multiplies.
Some more cleverness would be nice, though. It would be nice if we
could do this transformation on illegal types. Also, we would
prefer a narrower constant when possible so that we can use a narrower
multiply, which can be cheaper.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60283 91177308-0d34-0410-b5e6-96231b3b80d8
nearby FIXME.
I'm not sure what the right way to fix the Cell test was; if the
approach I used isn't okay, please let me know.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60277 91177308-0d34-0410-b5e6-96231b3b80d8
performance in most cases on the Grawp tester, but does speed some
things up (like shootout/hash by 15%). This also doesn't impact
compile time in a noticable way on the Grawp tester.
It also, of course, gets the testcase it was designed for right :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60120 91177308-0d34-0410-b5e6-96231b3b80d8
-enable-smarter-addr-folding to llc) that gives CGP a better
cost model for when to sink computations into addressing modes.
The basic observation is that sinking increases register
pressure when part of the addr computation has to be available
for other reasons, such as having a use that is a non-memory
operation. In cases where it works, it can substantially reduce
register pressure.
This code is currently an overall win on 403.gcc and 255.vortex
(the two things I've been looking at), but there are several
things I want to do before enabling it by default:
1. This isn't doing any caching of results, so it is much slower
than it could be. It currently slows down release-asserts llc
by 1.7% on 176.gcc: 27.12s -> 27.60s.
2. This doesn't think about inline asm memory operands yet.
3. The cost model botches the case when the needed value is live
across the computation for other reasons.
I'll continue poking at this, and eventually turn it on as llcbeta.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60074 91177308-0d34-0410-b5e6-96231b3b80d8
optimize addressing modes. This allows us to optimize things like isel-sink2.ll
into:
movl 4(%esp), %eax
cmpb $0, 4(%eax)
jne LBB1_2 ## F
LBB1_1: ## TB
movl $4, %eax
ret
LBB1_2: ## F
movzbl 7(%eax), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
cmpb $0, 4(%eax)
leal 4(%eax), %eax
jne LBB1_2 ## F
LBB1_1: ## TB
movl $4, %eax
ret
LBB1_2: ## F
movzbl 3(%eax), %eax
ret
This shrinks (e.g.) 403.gcc from 1133510 to 1128345 lines of .s.
Note that the 2008-10-16-SpillerBug.ll testcase is dubious at best, I doubt
it is really testing what it thinks it is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60068 91177308-0d34-0410-b5e6-96231b3b80d8
(a) Remove conditionally removed code in SelectXAddr. Basically, hope for the
best that the A-form and D-form address predicates catch everything before
the code decides to emit a X-form address.
(b) Expand vector store test cases to include the usual suspects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60034 91177308-0d34-0410-b5e6-96231b3b80d8
introduce any new spilling; it just uses unused registers.
Refactor the SUnit topological sort code out of the RRList scheduler and
make use of it to help with the post-pass scheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59999 91177308-0d34-0410-b5e6-96231b3b80d8
(a) Slight rethink on i64 zero/sign/any extend code - use a shuffle to
directly zero-extend i32 to i64, but use rotates and shifts for
sign extension. Also ensure unified register consistency.
(b) Add new test harness for i64 operations: i64ops.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59970 91177308-0d34-0410-b5e6-96231b3b80d8
(a) Improve the extract element code: there's no need to do gymnastics with
rotates into the preferred slot if a shuffle will do the same thing.
(b) Rename a couple of SPUISD pseudo-instructions for readability and better
semantic correspondence.
(c) Fix i64 sign/any/zero extension lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59965 91177308-0d34-0410-b5e6-96231b3b80d8
