RAGreedy::tryAssign will now evict interference from the preferred
register even when another register is free.
To support this, add the EvictionCost struct that counts how many hints
are broken by an eviction. We don't want to break one hint just to
satisfy another.
Rename canEvict to shouldEvict, and add the first bit of eviction policy
that doesn't depend on spill weights: Always make room in the preferred
register as long as the evictees can be split and aren't already
assigned to their preferred register.
Also make the CSR avoidance more accurate. When looking for a cheaper
register it is OK to use a new volatile register. Only CSR aliases that
have never been used before should be avoided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134735 91177308-0d34-0410-b5e6-96231b3b80d8
Hook up the TableGen lowering for simple pseudo instructions for ARM and
use it for a subset of the many pseudos the backend has as proof of concept.
More conversions to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134705 91177308-0d34-0410-b5e6-96231b3b80d8
We have to do this in DAGBuilder instead of DAGCombiner, because the exact bit is lost after building.
struct foo { char x[24]; };
long bar(struct foo *a, struct foo *b) { return a-b; }
is now compiled into
movl 4(%esp), %eax
subl 8(%esp), %eax
sarl $3, %eax
imull $-1431655765, %eax, %eax
instead of
movl 4(%esp), %eax
subl 8(%esp), %eax
movl $715827883, %ecx
imull %ecx
movl %edx, %eax
shrl $31, %eax
sarl $2, %edx
addl %eax, %edx
movl %edx, %eax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134695 91177308-0d34-0410-b5e6-96231b3b80d8
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134678 91177308-0d34-0410-b5e6-96231b3b80d8
numbers should be printed instead of symbolic register names in
MCAsmStreamer::EmitRegisterName. This is necessary because some versions of
GNU assembler won't accept code in which symbolic register names are used in
cfi directives. There is no change in behavior unless the flag is explicitly
set to true by a backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134635 91177308-0d34-0410-b5e6-96231b3b80d8
before the offset. This change will enable simplification of function
MipsRegisterInfo::eliminateFrameIndex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134625 91177308-0d34-0410-b5e6-96231b3b80d8
DBG_VALUE 3.310000e+02, 0, !"ds"; dbg:sse.stepfft.c:138:18 @[ sse.stepfft.c:32:10 ]
DBG_VALUE 3.310000e+02, 0, !"ds"; dbg:sse.stepfft.c:138:18 @[ sse.stepfft.c:31:10 ]
These two MIs represent identical value, 3.31..., for one variable, ds, but they are not identical because the represent two separate instances of inlined variable "ds".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134620 91177308-0d34-0410-b5e6-96231b3b80d8
hasPredecessorHelper function allows predecessors to be cached to speed up
repeated invocations. This fixes PR10186.
X.isPredecessorOf(Y) now just calls Y.hasPredecessor(X)
Y.hasPredecessor(X) calls Y.hasPredecessorHelper(X, Visited, Worklist) with
empty Visited and Worklist sets (i.e. no caching over invocations).
Y.hasPredecessorHelper(X, Visited, Worklist) caches search state in Visited
and Worklist to speed up repeated calls. The Visited set is searched for X
before going to the worklist to further search the DAG if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134592 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, the testcase I have is large and confidential, so I don't have a test to commit at the moment; I'll see if I can come up with something smaller where this issue reproduces.
<rdar://problem/9716278>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134565 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to remove the (bogus and unneeded) encoding information from
the pseudo-instruction class definitions. All of the pseudos that haven't
been converted yet and still need encoding information instance from the normal
instruction classes and explicitly set isCodeGenOnly, and so are distinct
from this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134540 91177308-0d34-0410-b5e6-96231b3b80d8
Pseudo-instructions don't have encoding information, as they're lowered
to real instructions by the time we're doing binary encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134533 91177308-0d34-0410-b5e6-96231b3b80d8
The promotion code lost any alignment information, when hoisting loads and
stores out of the loop. This lead to incorrect aligned memory accesses. We now
use the largest alignment we can prove to be correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134520 91177308-0d34-0410-b5e6-96231b3b80d8
This is impossible in theory, I can prove it. In practice, our near-zero
threshold can cause the network to oscillate between equally good
solutions.
<rdar://problem/9720596>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134428 91177308-0d34-0410-b5e6-96231b3b80d8
If the function allocates reserved stack space for callee argument frames,
estimateStackSize() needs to account for that, as it doesn't show up as
ordinary frame objects. Otherwise, a callee with a large argument list will
throw off the calculations for whether to allocate an emergency spill slot
and we get assert() failures in the register scavenger.
rdar://9715469
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134415 91177308-0d34-0410-b5e6-96231b3b80d8
Remat during spilling triggers dead code elimination. If a phi-def
becomes unused, that may also cause live ranges to split into separate
connected components.
This type of splitting is different from normal live range splitting. In
particular, there may not be a common original interval.
When the split range is its own original, make sure that the new
siblings are also their own originals. The range being split cannot be
used as an original since it doesn't cover the new siblings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134413 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the issue noted in PR10251 where early tail dup of bbs with
indirectbr would cause a bb to be duplicated into a loop preheader
and then into its predecessors, creating phi nodes with identical
operands just before register allocation.
This helps with jsinterp.o size (__TEXT goes from 163568 to 126656)
and a bit with performance 1.005x faster on sunspider (jits still enabled).
The result on webkit with the jit disabled is more significant: 1.021x faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134372 91177308-0d34-0410-b5e6-96231b3b80d8
A split point inserted in a block with a landing pad successor may be
hoisted above the call to ensure that it dominates all successors. The
code that handles the rest of the basic block must take this into
account.
I am not including a test case, it would be very fragile. PR10244 comes
from building clang with exceptions enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134369 91177308-0d34-0410-b5e6-96231b3b80d8
Add a MI->emitError() method that the backend can use to report errors
related to inline assembly. Call it from X86FloatingPoint.cpp when the
constraints are wrong.
This enables proper clang diagnostics from the backend:
$ clang -c pr30848.c
pr30848.c:5:12: error: Inline asm output regs must be last on the x87 stack
__asm__ ("" : "=u" (d)); /* { dg-error "output regs" } */
^
1 error generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134307 91177308-0d34-0410-b5e6-96231b3b80d8
Every live range is assigned a cascade number the first time it is
involved in an eviction. As the evictor, it gets a new cascade number.
Every evictee is assigned the same cascade number as the evictor.
Eviction is prohibited if the evictor has a lower assigned cascade
number than the evictee.
This means that assigned cascade numbers are monotonically increasing
with every eviction, yet they are bounded by NextCascade which can only
be incremented by new live ranges. Thus, infinite loops cannot happen,
but eviction cascades can still be triggered by new live ranges as we
want.
Thanks to Andy for explaining this to me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134303 91177308-0d34-0410-b5e6-96231b3b80d8
outside the loop and reducible.
This more completely hides them from LSR, which isn't usually able to
do anything meaningful with non-affine expressions anyway, and this
consequently hides them from SCEVExpander, which is acutely unprepared
for non-affine expressions.
Replace test/CodeGen/X86/lsr-nonaffine.ll with a new test that tests
the new behavior.
This works around the bug in PR10117 / rdar://problem/9633149, and is
generally an improvement besides.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134268 91177308-0d34-0410-b5e6-96231b3b80d8
The DSP instructions in the Thumb2 instruction set are an optional extension
in the Cortex-M* archtitecture. When present, the implementation is considered
an "ARMv7E-M implementation," and when not, an "ARMv7-M implementation."
Add a subtarget feature hook for the v7e-m instructions and hook it up. The
cortex-m3 cpu is an example of a v7m implementation, while the cortex-m4 is
a v7e-m implementation.
rdar://9572992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134261 91177308-0d34-0410-b5e6-96231b3b80d8
itineraries.
- Refactor TargetSubtarget to be based on MCSubtargetInfo.
- Change tablegen generated subtarget info to initialize MCSubtargetInfo
and hide more details from targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134257 91177308-0d34-0410-b5e6-96231b3b80d8
t2MOVCC[ri] are just t2MOV[ri] instructions, so properly pseudo-ize them.
The Thumb1 versions, tMOVCC[ri] were only present for use by the size-
reduction pass, so they're no longer necessary at all and can be deleted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134242 91177308-0d34-0410-b5e6-96231b3b80d8
copy is a kill") to see if it fixes the i386 dragonegg buildbot, which is timing out
because gcc built with dragonegg is going into an infinite loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134237 91177308-0d34-0410-b5e6-96231b3b80d8
The constraints are represented by the register class of the original
virtual register created for the inline asm. If the register class were
included in the operand descriptor, we might be able to do this.
For now, just give up on regclass inflation when inline asm is involved.
No test case, this bug hasn't happened yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134226 91177308-0d34-0410-b5e6-96231b3b80d8
We would put the return value from long double functions in the wrong
register.
This fixes gcc.c-torture/execute/conversion.c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134205 91177308-0d34-0410-b5e6-96231b3b80d8
Merge the tMOVr, tMOVgpr2tgpr, tMOVtgpr2gpr, and tMOVgpr2gpr instructions
into tMOVr. There's no need to keep them separate. Giving the tMOVr
instruction the proper GPR register class for its operands is sufficient
to give the register allocator enough information to do the right thing
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134204 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a FIXME and allow predication (in Thumb2) for the T1 register to
register MOV instructions. This allows some better codegen with
if-conversion (as seen in the test updates), plus it lays the groundwork
for pseudo-izing the tMOVCC instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134197 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a call to a special helper function. Get rid of the T2 variant
entirely, as it's identical to the Thumb1 version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134178 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a t2LDMIA_UPD instruction with extra codegen properties, so it
doesn't need the encoding information. As a side-benefit, we now correctly
recognize for instruction printing as a 'pop' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134173 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a tPOP instruction with additional code-gen properties, so it
doesn't need encoding information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134172 91177308-0d34-0410-b5e6-96231b3b80d8
tADDrSPi is not predicable, so we can't size-reduce a t2ADDri to it if the
predicate is anything other than "always."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134130 91177308-0d34-0410-b5e6-96231b3b80d8
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134127 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will sometimes choose live range split points next to
interference instead of always splitting next to a register point. That
means spill code can now appear almost anywhere, and it was necessary
to fix code that didn't expect that.
The difficult places were:
- Between a CALL returning a value on the x87 stack and the
corresponding FpPOP_RETVAL (was FpGET_ST0). Probably also near x87
inline assembly, but that didn't actually show up in testing.
- Between a CALL popping arguments off the stack and the corresponding
ADJCALLSTACKUP.
Both are fixed now. The only place spill code can't appear is after
terminators, see SplitAnalysis::getLastSplitPoint.
Original commit message:
Rewrite RAGreedy::splitAroundRegion, now with cool ASCII art.
This function has to deal with a lot of special cases, and the old
version got it wrong sometimes. In particular, it would sometimes leave
multiple uses in the stack interval in a single block. That causes bad
code with multiple reloads in the same basic block.
The new version handles block entry and exit in a single pass. It first
eliminates all the easy cases, and then goes on to create a local
interval for the blocks with difficult interference. Previously, we
would only create the local interval for completely isolated blocks.
It can happen that the stack interval becomes completely empty because
we could allocate a register in all edge bundles, and the new local
intervals deal with the interference. The empty stack interval is
harmless, but we need to remove a SplitKit assertion that checks for
empty intervals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134125 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike Thumb1, Thumb2 does not have dedicated encodings for adjusting the
stack pointer. It can just use the normal add-register-immediate encoding
since it can use all registers as a source, not just R0-R7. The extra
instruction definitions are just duplicates of the normal instructions with
the (not well enforced) constraint that the source register was SP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134114 91177308-0d34-0410-b5e6-96231b3b80d8
Some x86-32 calls pop values off the stack, and we need to readjust the
stack pointer after the call. This happens when ADJCALLSTACKUP is
eliminated.
It could happen that spill code was inserted between the CALL and
ADJCALLSTACKUP instructions, and we would compute wrong stack pointer
offsets for those frame index references.
Fix this by inserting the stack pointer adjustment immediately after the
call instead of where the ADJCALLSTACKUP instruction was erased.
I don't have a test case since we don't currently insert code in that
position. We will soon, though. I am testing a regalloc patch that
didn't work on Linux because of this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134113 91177308-0d34-0410-b5e6-96231b3b80d8
already makes the assumption, which is correct on ARM, that a type's alignment is
less than its alloc size. This improves codegen with Clang (which inserts a lot of
extraneous alignment specifiers) and fixes <rdar://problem/9695089>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134106 91177308-0d34-0410-b5e6-96231b3b80d8
The tSpill and tRestore instructions are just copies of the tSTRspi and
tLDRspi instructions, respectively. Just use those directly instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134092 91177308-0d34-0410-b5e6-96231b3b80d8
For example, ".byte 256" would previously assert() when emitting an object
file. Now it generates a diagnostic that the literal value is out of range.
rdar://9686950
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134069 91177308-0d34-0410-b5e6-96231b3b80d8
This function has to deal with a lot of special cases, and the old
version got it wrong sometimes. In particular, it would sometimes leave
multiple uses in the stack interval in a single block. That causes bad
code with multiple reloads in the same basic block.
The new version handles block entry and exit in a single pass. It first
eliminates all the easy cases, and then goes on to create a local
interval for the blocks with difficult interference. Previously, we
would only create the local interval for completely isolated blocks.
It can happen that the stack interval becomes completely empty because
we could allocate a register in all edge bundles, and the new local
intervals deal with the interference. The empty stack interval is
harmless, but we need to remove a SplitKit assertion that checks for
empty intervals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134047 91177308-0d34-0410-b5e6-96231b3b80d8
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134021 91177308-0d34-0410-b5e6-96231b3b80d8
Drop the FpMov instructions, use plain COPY instead.
Drop the FpSET/GET instruction for accessing fixed stack positions.
Instead use normal COPY to/from ST registers around inline assembly, and
provide a single new FpPOP_RETVAL instruction that can access the return
value(s) from a call. This is still necessary since you cannot tell from
the CALL instruction alone if it returns anything on the FP stack. Teach
fast isel to use this.
This provides a much more robust way of handling fixed stack registers -
we can tolerate arbitrary FP stack instructions inserted around calls
and inline assembly. Live range splitting could sometimes break x87 code
by inserting spill code in unfortunate places.
As a bonus we handle floating point inline assembly correctly now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134018 91177308-0d34-0410-b5e6-96231b3b80d8
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
and r1, #ff
and r1, r1, #ff
rdar://9672867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133973 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly parse the forms of the Thumb mov-immediate instruction:
1. 8-bit immediate 0-255.
2. 12-bit shifted-immediate.
The 16-bit immediate "movw" form is also legal with just a "mov" mnemonic,
but is not yet supported. More parser logic necessary there due to fixups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133966 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 MOV mnemonic can accept both cc_out and predication. We don't (yet)
encode the instruction properly, but this gets the parsing part.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133945 91177308-0d34-0410-b5e6-96231b3b80d8
Add aliases for the vpush/vpop mnemonics to the VFP load/store multiple
writeback instructions w/ SP as the base pointer.
rdar://9683231
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133932 91177308-0d34-0410-b5e6-96231b3b80d8
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
sub r2, r2, #6
sub r2, #6
rdar://9682597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133925 91177308-0d34-0410-b5e6-96231b3b80d8
Removed the check that peeks past EXTRA_SUBREG, which I don't think
makes sense any more. Intead treat it as a normal register def. No
significant affect on x86 or ARM benchmarks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133917 91177308-0d34-0410-b5e6-96231b3b80d8
alloca that only holds a copy of a global and we're going to replace the users
of the alloca with that global, just nuke the lifetime intrinsics. Part of
PR10121.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133905 91177308-0d34-0410-b5e6-96231b3b80d8
This allows for more live scratch registers which is needed to handle
live ST registers before return and inline asm instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133903 91177308-0d34-0410-b5e6-96231b3b80d8
Both become <earlyclobber> defs on the INLINEASM MachineInstr, but we
now use two different asm operand kinds.
The new Kind_Clobber is treated identically to the old
Kind_RegDefEarlyClobber for now, but x87 floating point stack inline
assembly does care about the difference.
This will pop a register off the stack:
asm("fstp %st" : : "t"(x) : "st");
While this will pop the input and push an output:
asm("fst %st" : "=&t"(r) : "t"(x));
We need to know if ST0 was a clobber or an output operand, and we can't
depend on <dead> flags for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133902 91177308-0d34-0410-b5e6-96231b3b80d8
The INLINEASM MachineInstrs have an immediate operand describing each
original inline asm operand. Decode the bits in MachineInstr::print() so
it is easier to read:
INLINEASM <es:rorq $1,$0>, $0:[regdef], %vreg0<def>, %vreg1<def>, $1:[imm], 1, $2:[reguse] [tiedto:$0], %vreg2, %vreg3, $3:[regdef-ec], %EFLAGS<earlyclobber,imp-def>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133901 91177308-0d34-0410-b5e6-96231b3b80d8
The .b8 operations in PTX are far more limiting than I first thought. The mov operation isn't even supported, so there's no way of converting a .pred value into a .b8 without going via .b16, which is
not sensible. An improved implementation needs to use the fact that loads and stores automatically extend and truncate to implement support for EXTLOAD and TRUNCSTORE in order to correctly support
boolean values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133873 91177308-0d34-0410-b5e6-96231b3b80d8
Move the target-specific RecordRelocation logic out of the generic MC
MachObjectWriter and into the target-specific object writers. This allows
nuking quite a bit of target knowledge from the supposedly target-independent
bits in lib/MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133844 91177308-0d34-0410-b5e6-96231b3b80d8
The fixup value comes in as the whole 32-bit value, so for the lo16 fixup,
the upper bits need to be masked off. Previously we assumed the masking had
already been done and asserted.
rdar://9635991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133818 91177308-0d34-0410-b5e6-96231b3b80d8
The i8 type is required for boolean values, but can only use ld, st and mov instructions. The i1 type continues to be used for predicates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133814 91177308-0d34-0410-b5e6-96231b3b80d8
instructions can be used to match combinations of multiply/divide and VCVT
(between floating-point and integer, Advanced SIMD). Basically the VCVT
immediate operand that specifies the number of fraction bits corresponds to a
floating-point multiply or divide by the corresponding power of 2.
For example, VCVT (floating-point to fixed-point, Advanced SIMD) can replace a
combination of VMUL and VCVT (floating-point to integer) as follows:
Example (assume d17 = <float 8.000000e+00, float 8.000000e+00>):
vmul.f32 d16, d17, d16
vcvt.s32.f32 d16, d16
becomes:
vcvt.s32.f32 d16, d16, #3
Similarly, VCVT (fixed-point to floating-point, Advanced SIMD) can replace a
combinations of VCVT (integer to floating-point) and VDIV as follows:
Example (assume d17 = <float 8.000000e+00, float 8.000000e+00>):
vcvt.f32.s32 d16, d16
vdiv.f32 d16, d17, d16
becomes:
vcvt.f32.s32 d16, d16, #3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133813 91177308-0d34-0410-b5e6-96231b3b80d8
.file and .loc directives.
Ideally, we would utilize the existing support in AsmPrinter for this, but
I cannot find a way to get .file and .loc directives to print without the
rest of the associated DWARF sections, which ptxas cannot handle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133812 91177308-0d34-0410-b5e6-96231b3b80d8
enables SelectionDAG::getLoad at MipsISelLowering.cpp:1914 to return a
pre-existing node instead of redundantly create a new node every time it is
called.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133811 91177308-0d34-0410-b5e6-96231b3b80d8
target machine from those that are only needed by codegen. The goal is to
sink the essential target description into MC layer so we can start building
MC based tools without needing to link in the entire codegen.
First step is to refactor TargetRegisterInfo. This patch added a base class
MCRegisterInfo which TargetRegisterInfo is derived from. Changed TableGen to
separate register description from the rest of the stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133782 91177308-0d34-0410-b5e6-96231b3b80d8
parameters if SM >= 2.0
- Update test cases to be more robust against register allocation changes
- Bump up the number of registers to 128 per type
- Include Python script to re-generate register file with any number of
registers
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133736 91177308-0d34-0410-b5e6-96231b3b80d8
It has only one user. This eliminates the last include of
config.h from the public headers -- ideally, config.h
shouldn't even be installed by `make install` anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133713 91177308-0d34-0410-b5e6-96231b3b80d8
"Reinstate r133435 and r133449 (reverted in r133499) now that the clang
self-hosted build failure has been fixed (r133512)."
Due to some additional warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133700 91177308-0d34-0410-b5e6-96231b3b80d8
register allocation if it has a indirectbr or if we can duplicate it to
every predecessor.
This fixes the SingleSource/Benchmarks/Shootout-C++/matrix.cpp regression but
keeps the previous improvements to sunspider.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133682 91177308-0d34-0410-b5e6-96231b3b80d8
If the linker supports it, this will hold the CIE and FDE information in a
compact format. The implementation of the compact unwinding emission is coming
soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133658 91177308-0d34-0410-b5e6-96231b3b80d8
representing a constant reference to ValType. Normally this is just
"const ValType &", but when ValType is a std::vector we want to use
ArrayRef as the reference type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133611 91177308-0d34-0410-b5e6-96231b3b80d8
be one with only one unconditional branch and no phis. Duplicating the phis in this case
is possible, but requeres liveness analysis or breaking edges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133607 91177308-0d34-0410-b5e6-96231b3b80d8
to emit "movd" across the board to continue supporting a Darwin assembler bug.
This is the reincarnation of r133452.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133565 91177308-0d34-0410-b5e6-96231b3b80d8
