difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Work in progress, only A+B are enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
result. This allows us to compile:
void *test12(long count) {
return new int[count];
}
into:
test12:
movl $4, %ecx
movq %rdi, %rax
mulq %rcx
movq $-1, %rdi
cmovnoq %rax, %rdi
jmp __Znam ## TAILCALL
instead of:
test12:
movl $4, %ecx
movq %rdi, %rax
mulq %rcx
seto %cl
testb %cl, %cl
movq $-1, %rdi
cmoveq %rax, %rdi
jmp __Znam
Of course it would be even better if the regalloc inverted the cmov to 'cmovoq',
which would eliminate the need for the 'movq %rdi, %rax'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120936 91177308-0d34-0410-b5e6-96231b3b80d8
backend that they were all implemented except umul. This one fell back
to the default implementation that did a hi/lo multiply and compared the
top. Fix this to check the overflow flag that the 'mul' instruction
sets, so we can avoid an explicit test. Now we compile:
void *func(long count) {
return new int[count];
}
into:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
seto %cl ## encoding: [0x0f,0x90,0xc1]
testb %cl, %cl ## encoding: [0x84,0xc9]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
instead of:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
testq %rdx, %rdx ## encoding: [0x48,0x85,0xd2]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
Other than the silly seto+test, this is using the o bit directly, so it's going in the right
direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120935 91177308-0d34-0410-b5e6-96231b3b80d8
- Also adds a new POPCNT subtarget feature that is currently enabled if the target
supports SSE4.2 (nehalem) or SSE4A (barcelona).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120917 91177308-0d34-0410-b5e6-96231b3b80d8
Lifted adjustFixupValue() from Darwin for sharing w ELF.
Test added
TODO:
refactor ELFObjectWriter::RecordRelocation more.
Possibly share more code with Darwin?
Lots more relocations...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120534 91177308-0d34-0410-b5e6-96231b3b80d8
legalization time. Since at legalization time there is no mapping from
SDNode back to the corresponding LLVM instruction and the return
SDNode is target specific, this requires a target hook to check for
eligibility. Only x86 and ARM support this form of sibcall optimization
right now.
rdar://8707777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120501 91177308-0d34-0410-b5e6-96231b3b80d8
We need to check if the individual vector elements are sign/zero-extended
values. For now this only handles constants values. Radar 8687140.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120034 91177308-0d34-0410-b5e6-96231b3b80d8
state. Previously Thumb2 would restore sp from fp like this:
mov sp, r7
sub, sp, #4
If an interrupt is taken after the 'mov' but before the 'sub', callee-saved
registers might be clobbered by the interrupt handler. Instead, try
restoring directly from sp:
add sp, #4
Or, if necessary (with VLA, etc.) use a scratch register to compute sp and
then restore it:
sub.w r4, r7, #8
mov sp, r7
rdar://8465407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119977 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine from making an illegal transformation of bitcast of a scalar to a
vector into a scalar_to_vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119819 91177308-0d34-0410-b5e6-96231b3b80d8
if the extension types were not the same. The result was that if you
fed a select with sext and zext loads, as in the testcase, then it
would get turned into a zext (or sext) of the select, which is wrong
in the cases when it should have been an sext (resp. zext). Reported
and diagnosed by Sebastien Deldon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119728 91177308-0d34-0410-b5e6-96231b3b80d8
Remove movePastCSLoadStoreOps and associated code for simple pointer
increments. Update routines that depended upon other opcodes for save/restore.
Adjust all testcases accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119725 91177308-0d34-0410-b5e6-96231b3b80d8
and testing is easier. A good example is the unknown-location.ll test that
now can just look for ".loc 1 0 0". We also don't use a DW_LNE_set_address for
every address change anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119613 91177308-0d34-0410-b5e6-96231b3b80d8
memset; we may need it to decide between MOVAPS and MOVUPS
later. Adjust a test that was looking for wrong code.
PR 3866 / 8675131.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119605 91177308-0d34-0410-b5e6-96231b3b80d8
appear to differ on Linux. Try to make them pass on Linux.
Would be good for a Linux person to review this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119572 91177308-0d34-0410-b5e6-96231b3b80d8
It is generally not sufficient to check if the starting offset is in range
of the maximum offset that can be efficiently used for the target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119565 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it more clear that the symbol is an internal, compiler-generated
name and gives a little more description about its contents.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119564 91177308-0d34-0410-b5e6-96231b3b80d8
It was mistakenly looking at the pointer type when checking for the size of
global variables. This is a partial fix for Radar 8673120.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119563 91177308-0d34-0410-b5e6-96231b3b80d8
and xor. The 32-bit move immediates can be hoisted out of loops by machine
LICM but the isel hacks were preventing them.
Instead, let peephole optimization pass recognize registers that are defined by
immediates and the ARM target hook will fold the immediates in.
Other changes include 1) do not fold and / xor into cmp to isel TST / TEQ
instructions if there are multiple uses. This happens when the 'and' is live
out, machine sink would have sinked the computation and that ends up pessimizing
code. The peephole pass would recognize situations where the 'and' can be
toggled to define CPSR and eliminate the comparison anyway.
2) Move peephole pass to after machine LICM, sink, and CSE to avoid blocking
important optimizations.
rdar://8663787, rdar://8241368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119548 91177308-0d34-0410-b5e6-96231b3b80d8
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.
Except when it is an early clobber tied to a use operand. Then it starts at the
def slot like a standard def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119305 91177308-0d34-0410-b5e6-96231b3b80d8
live ranges for the spill register are also defined at the use slot instead of
the normal def slot.
This fixes PR8612 for the inline spiller. A use was being allocated to the same
register as a spilled early clobber def.
This problem exists in all the spillers. A fix for the standard spiller is
forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119182 91177308-0d34-0410-b5e6-96231b3b80d8
support for the case where alignment<value size.
These cases were silently miscompiled before this patch.
Now they are overly verbose -especially storing is- and
any front-end should still avoid misaligned memory
accesses as much as possible. The bit juggling algorithm
added here probably has some room for improvement still.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118889 91177308-0d34-0410-b5e6-96231b3b80d8
It is only supported for ARM code. Normally Thumb2 code would use DMB instead,
but depending on how the compiler is invoked (e.g., -mattr=-db) that might be
disabled. This prevents a "cannot select MEMBARRIER_MCR" error in that
situation. Radar 8644195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118642 91177308-0d34-0410-b5e6-96231b3b80d8
exposed:
GAS doesn't accept "fcomip %st(1)", it requires "fcomip %st(1), %st(0)"
even though st(0) is implicit in all other fp stack instructions.
Fortunately, there is an alias for fcomip named "fcompi" and gas does
accept the default argument for the alias (boggle!).
As such, switch the canonical form of this instruction to "pi" instead
of "ip". This makes the code generator and disassembler generate pi,
avoiding the gas bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118356 91177308-0d34-0410-b5e6-96231b3b80d8
sequence of loads and stores was being generated to perform the
copy on the x86 targets if the parameter was less than 4 byte
aligned, causing llc to use up vast amounts of memory and time.
Use a "rep movs" form instead. PR7170.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118260 91177308-0d34-0410-b5e6-96231b3b80d8
We could be more aggressive about making this work for a larger range of constants,
but this seems like a good start.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118201 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fix pre-ra scheduler so it doesn't try to push instructions above calls to
"optimize for latency". Call instructions don't have the right latency and
this is more likely to use introduce spills.
2. Fix if-converter cost function. For ARM, it should use instruction latencies,
not # of micro-ops since multi-latency instructions is completely executed
even when the predicate is false. Also, some instruction will be "slower"
when they are predicated due to the register def becoming implicit input.
rdar://8598427
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118135 91177308-0d34-0410-b5e6-96231b3b80d8
at more than those which define CPSR. You can have this situation:
(1) subs ...
(2) sub r6, r5, r4
(3) movge ...
(4) cmp r6, 0
(5) movge ...
We cannot convert (2) to "subs" because (3) is using the CPSR set by
(1). There's an analogous situation here:
(1) sub r1, r2, r3
(2) sub r4, r5, r6
(3) cmp r4, ...
(5) movge ...
(6) cmp r1, ...
(7) movge ...
We cannot convert (1) to "subs" because of the intervening use of CPSR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117950 91177308-0d34-0410-b5e6-96231b3b80d8
There were a number of issues to fix up here:
* The "device" argument of the llvm.memory.barrier intrinsic should be
used to distinguish the "Full System" domain from the "Inner Shareable"
domain. It has nothing to do with using DMB vs. DSB instructions.
* The compiler should never need to emit DSB instructions. Remove the
ARMISD::SYNCBARRIER node and also remove the instruction patterns for DSB.
* Merge the separate DMB/DSB instructions for options only used for the
disassembler with the default DMB/DSB instructions. Add the default
"full system" option ARM_MB::SY to the ARM_MB::MemBOpt enum.
* Add a separate ARMISD::MEMBARRIER_MCR node for subtargets that implement
a data memory barrier using the MCR instruction.
* Fix up encodings for these instructions (except MCR).
I also updated the tests and added a few new ones to check for DMB options
that were not currently being exercised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117756 91177308-0d34-0410-b5e6-96231b3b80d8
operand and one of them has a single use that is a live out copy, favor the
one that is live out. Otherwise it will be difficult to eliminate the copy
if the instruction is a loop induction variable update. e.g.
BB:
sub r1, r3, #1
str r0, [r2, r3]
mov r3, r1
cmp
bne BB
=>
BB:
str r0, [r2, r3]
sub r3, r3, #1
cmp
bne BB
This fixed the recent 256.bzip2 regression.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117675 91177308-0d34-0410-b5e6-96231b3b80d8
- For now, loads of [r, r] addressing mode is the same as the
[r, r lsl/lsr/asr #] variants. ARMBaseInstrInfo::getOperandLatency() should
identify the former case and reduce the output latency by 1.
- Also identify [r, r << 2] case. This special form of shifter addressing mode
is "free".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117519 91177308-0d34-0410-b5e6-96231b3b80d8
elements than the result vector type. So, when an instruction like:
%8 = shufflevector <2 x float> %4, <2 x float> %7, <4 x i32> <i32 1, i32 0, i32 3, i32 2>
is translated to a DAG, each operand is changed to a concat_vectors node that appends 2 undef elements. That is:
shuffle [a,b], [c,d] is changed to:
shuffle [a,b,u,u], [c,d,u,u]
That's probably the right thing for x86 but for NEON, we'd much rather have:
shuffle [a,b,c,d], undef
Teach the DAG combiner how to do that transformation for ARM. Radar 8597007.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117482 91177308-0d34-0410-b5e6-96231b3b80d8
The SPU ABI does not mention v64, and all examples
in C suggest v128 are treated similarily to arrays,
we use array alignment for v64 too. This makes the
alignment of e.g. [2 x <2 x i32>] behave "intuitively"
and similar to as if the elements were e.g. i32s.
This also makes an "unaligned store" test to be
aligned, with different (but functionally equivalent)
code generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117360 91177308-0d34-0410-b5e6-96231b3b80d8
do not double-count the duplicate instructions by counting once from the
beginning and again from the end. Keep track of where the duplicates from
the beginning ended and don't go past that point when counting duplicates
at the end. Radar 8589805.
This change causes one of the MC/ARM/simple-fp-encoding tests to produce
different (better!) code without the vmovne instruction being tested.
I changed the test to produce vmovne and vmoveq instructions but moving
between register files in the opposite direction. That's not quite the same
but predicated versions of those instructions weren't being tested before,
so at least the test coverage is not any worse, just different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117333 91177308-0d34-0410-b5e6-96231b3b80d8
1. A delay slot filler that searches for valid instructions
to fill the delay slot with. Previously NOPs would always
be inserted into delay slots.
2. Support for MC based instruction printer added.
3. Support for MC based machine code generation and ELF
file generation. ELF file generation does not yet
completely work as much of the ELF support infrastructure
is still x86/x86-64 specific.
4. General clean up of the MBlaze backend code. Much of the
tablegen code has been cleanup and simplified.
Bug Fixes:
1. Removed duplicate periods from subtarget feature descriptions.
2. Many of the instructions had bad machine code information
in the tablegen files. Much of this has been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116986 91177308-0d34-0410-b5e6-96231b3b80d8
- Initial register pressure in the loop should be all the live defs into the
loop. Not just those from loop preheader which is often empty.
- When an instruction is hoisted, update register pressure from loop preheader
to the original BB.
- Treat only use of a virtual register as kill since the code is still SSA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116956 91177308-0d34-0410-b5e6-96231b3b80d8
