on x86, to avoid explicit test instructions. A few existing tests changed
due to arbitrary register allocation differences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82263 91177308-0d34-0410-b5e6-96231b3b80d8
has multiple uses, as one of the other uses may be on a path
to a different node above the callseq_start, because that
leads to a cyclic graph. This problem is exposed when
-combiner-global-alias-analysis is used. This fixes PR4880.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81821 91177308-0d34-0410-b5e6-96231b3b80d8
Change the picbase symbol on non-darwin systems from ".Lllvm$4.$piclabel" to
".L4$pb". The actual name doesn't matter and the darwin name is shorter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81688 91177308-0d34-0410-b5e6-96231b3b80d8
sse, this code falls back to SelectionDAG isel which uses an x87
instruction, which is fine, but not what this test is testing for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81656 91177308-0d34-0410-b5e6-96231b3b80d8
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
safe. This can happen we a subreg_to_reg 0 has been coalesced. One
exception is when the instruction that folds the load is a move, then we
can simply turn it into a 32-bit load from the stack slot.
rdar://7170444
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81494 91177308-0d34-0410-b5e6-96231b3b80d8
to instructions instead of zero extended ones. This makes the asmprinter
print signed values more consistently. This apparently only really affects
the X86 backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81265 91177308-0d34-0410-b5e6-96231b3b80d8
depth first order, so it wouldn't process unreachable blocks.
When compiling at -O0, late dead block elimination isn't done
and the bad instructions got to isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81187 91177308-0d34-0410-b5e6-96231b3b80d8
from floating-point to integer first, and bitcast the result
back to floating-point. Previously, this test was passing by
falling back to SelectionDAG lowering. The resulting code isn't
as nice, but it's correct and CodeGen now stays on the fast path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81171 91177308-0d34-0410-b5e6-96231b3b80d8
- I'd appreciate it if someone else eyeballs my changes to make sure I captured
the intent of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81083 91177308-0d34-0410-b5e6-96231b3b80d8
linear scan reg alloc. This fixes a problem I ran into where extracting
a function from a larger file caused the generated code to change (masking
the problem I was trying to debug) because the allocator behaved differently.
This changes the results for two X86 regression checks. stack-color-with-reg
is improved, with one less instruction, but pr3495 is worse, with one more
copy. As far as I can tell, these tests were just getting lucky or unlucky,
so I've changed the expected results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81060 91177308-0d34-0410-b5e6-96231b3b80d8
moves. This avoids the need to promote the operands (or implicitly
extend them, a partial register update condition), and can reduce
i8 register pressure. This substantially speeds up code such as
write_hex in lib/Support/raw_ostream.cpp.
subclass-coalesce.ll is too trivial and no longer tests what it was
originally intended to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80184 91177308-0d34-0410-b5e6-96231b3b80d8
leads to partial-register definitions. To help avoid redundant
zero-extensions, also teach the h-register matching patterns that
use movzbl to match anyext as well as zext.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80099 91177308-0d34-0410-b5e6-96231b3b80d8
more and is much nicer to the OS.
- Dan, please check. If there are parts of the test you think I should strip
out so it doesn't cause random failures let me know (there are still some PIC
label numbers in it, for example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80019 91177308-0d34-0410-b5e6-96231b3b80d8
When undoing a reuse in ReuseInfo::GetRegForReload, check if it was only a
sub-register being used. The MachineOperand::getSubReg() method is only valid
for virtual registers, so we have to recover the sub-register index manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79855 91177308-0d34-0410-b5e6-96231b3b80d8
over absolute addressing even in non-PIC mode (unless the address
has an index or something else incompatible), because it has a
smaller encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79553 91177308-0d34-0410-b5e6-96231b3b80d8
remove RemoveDuplicateSuccessor, as it is no longer necessary, and because
it breaks assumptions made in
MachineBasicBlock::isOnlyReachableByFallthrough.
Convert test/CodeGen/X86/omit-label.ll to FileCheck and add a testcase
for PR4732.
test/CodeGen/Thumb2/thumb2-ifcvt2.ll sees a diff with this commit due to
it being bugpoint-reduced to the point where it doesn't matter what the
condition for the branch is.
Add some more interesting code to
test/CodeGen/X86/2009-08-06-branchfolder-crash.ll, which is the testcase
that originally motivated the RemoveDuplicateSuccessor code, to help
verify that the original problem isn't being re-broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79338 91177308-0d34-0410-b5e6-96231b3b80d8
the register save area if %al is 0. This avoids touching xmm
regsiters when they aren't actually used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79061 91177308-0d34-0410-b5e6-96231b3b80d8
syntactically as a string, very similiar to what Chris did with MachO.
The parsing support and validation is not introduced yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78890 91177308-0d34-0410-b5e6-96231b3b80d8
MERGE_VALUES nodes. Replacing the result values with the
operands in one MERGE_VALUES node may cause another
MERGE_VALUES node be CSE'd with the first one, and bring
its uses along, so that the first one isn't dead, as this
code expects. Fix this by iterating until the node is
really dead. This fixes PR4699.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78619 91177308-0d34-0410-b5e6-96231b3b80d8
instead of syntactically as a string. This means that it keeps track of the
segment, section, flags, etc directly and asmprints them in the right format.
This also includes parsing and validation support for llvm-mc and
"attribute(section)", so we should now start getting errors about invalid
section attributes from the compiler instead of the assembler on darwin.
Still todo:
1) Uniquing of darwin mcsections
2) Move all the Darwin stuff out to MCSectionMachO.[cpp|h]
3) there are a few FIXMEs, for example what is the syntax to get the
S_GB_ZEROFILL segment type?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78547 91177308-0d34-0410-b5e6-96231b3b80d8
bytes for F2 0F 38 and propagate. Add a FIXME for a set
of possibilities which correspond to intrinsics already used.
New test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78508 91177308-0d34-0410-b5e6-96231b3b80d8
by aggressive chain operand optimization. UpdateNodeOperands
does not modify the node in place if it would result in
a node identical to an existing node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78297 91177308-0d34-0410-b5e6-96231b3b80d8
and high-bits values in ways that weren't correct for integer
types wider than 64 bits. This fixes a miscompile in
PPMacroExpansion.cpp in clang on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78295 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of awkwardly encoding calling-convention information with ISD::CALL,
ISD::FORMAL_ARGUMENTS, ISD::RET, and ISD::ARG_FLAGS nodes, TargetLowering
provides three virtual functions for targets to override:
LowerFormalArguments, LowerCall, and LowerRet, which replace the custom
lowering done on the special nodes. They provide the same information, but
in a more immediately usable format.
This also reworks much of the target-independent tail call logic. The
decision of whether or not to perform a tail call is now cleanly split
between target-independent portions, and the target dependent portion
in IsEligibleForTailCallOptimization.
This also synchronizes all in-tree targets, to help enable future
refactoring and feature work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78142 91177308-0d34-0410-b5e6-96231b3b80d8
When LowerExtract eliminates an EXTRACT_SUBREG with a kill flag, it moves the
kill flag to the place where the sub-register is killed. This can accidentally
overlap with the use of a sibling sub-register, and we have trouble.
In the test case we have this code:
Live Ins: %R0 %R1 %R2
%R2L<def> = EXTRACT_SUBREG %R2<kill>, 1
%R2H<def> = LOAD16fi <fi#-1>, 0, Mem:LD(2,4) [FixedStack-1 + 0]
%R1L<def> = EXTRACT_SUBREG %R1<kill>, 1
%R0L<def> = EXTRACT_SUBREG %R0<kill>, 1
%R0H<def> = ADD16 %R2H<kill>, %R2L<kill>, %AZ<imp-def>, %AN<imp-def>, %AC0<imp-def>, %V<imp-def>, %VS<imp-def>
subreg: CONVERTING: %R2L<def> = EXTRACT_SUBREG %R2<kill>, 1
subreg: eliminated!
subreg: killed here: %R0H<def> = ADD16 %R2H, %R2L, %R2<imp-use,kill>, %AZ<imp-def>, %AN<imp-def>, %AC0<imp-def>, %V<imp-def>, %VS<imp-def>
The kill flag on %R2 is moved to the last instruction, and the live range overlaps with the definition of %R2H:
*** Bad machine code: Redefining a live physical register ***
- function: f
- basic block: 0x18358c0 (#0)
- instruction: %R2H<def> = LOAD16fi <fi#-1>, 0, Mem:LD(2,4) [FixedStack-1 + 0]
Register R2H was defined but already live.
The fix is to replace EXTRACT_SUBREG with IMPLICIT_DEF instead of eliminating
it completely:
subreg: CONVERTING: %R2L<def> = EXTRACT_SUBREG %R2<kill>, 1
subreg: replace by: %R2L<def> = IMPLICIT_DEF %R2<kill>
Note that these IMPLICIT_DEF instructions survive to the asm output. It is
necessary to fix the stack-color-with-reg test case because of that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78093 91177308-0d34-0410-b5e6-96231b3b80d8
This is not just a matter of passing in the target triple from the module;
currently backends are making decisions based on the build and host
architecture. The goal is to migrate to making these decisions based off of the
triple (in conjunction with the feature string). Thus most clients pass in the
target triple, or the host triple if that is empty.
This has one important change in the way behavior of the JIT and llc.
For the JIT, it was previously selecting the Target based on the host
(naturally), but it was setting the target machine features based on the triple
from the module. Now it is setting the target machine features based on the
triple of the host.
For LLC, -march was previously only used to select the target, the target
machine features were initialized from the module's triple (which may have been
empty). Now the target triple is taken from the module, or the host's triple is
used if that is empty. Then the triple is adjusted to match -march.
The take away is that -march for llc is now used in conjunction with the host
triple to initialize the subtarget. If users want more deterministic behavior
from llc, they should use -mtriple, or set the triple in the input module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77946 91177308-0d34-0410-b5e6-96231b3b80d8
to:
.quad X
even on a 32-bit system, where X is not 64-bits. There isn't much that
we can do here, so we just print:
.quad ((X) & 4294967295)
instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77818 91177308-0d34-0410-b5e6-96231b3b80d8
padding is disabled, tabs get replaced by spaces except in the case of
the first operand, where the tab is output to line up the operands after
the mnemonics.
Add some better comments and eliminate redundant code.
Fix some testcases to not assume tabs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77740 91177308-0d34-0410-b5e6-96231b3b80d8
into the mergable section if it is one of our special cases. This could
obviously be improved, but this is the minimal fix and restores us to the
previous behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77679 91177308-0d34-0410-b5e6-96231b3b80d8
When the return value is not used (i.e. only care about the value in the memory), x86 does not have to use add to implement these. Instead, it can use add, sub, inc, dec instructions with the "lock" prefix.
This is currently implemented using a bit of instruction selection trick. The issue is the target independent pattern produces one output and a chain and we want to map it into one that just output a chain. The current trick is to select it into a merge_values with the first definition being an implicit_def. The proper solution is to add new ISD opcodes for the no-output variant. DAG combiner can then transform the node before it gets to target node selection.
Problem #2 is we are adding a whole bunch of x86 atomic instructions when in fact these instructions are identical to the non-lock versions. We need a way to add target specific information to target nodes and have this information carried over to machine instructions. Asm printer (or JIT) can use this information to add the "lock" prefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77582 91177308-0d34-0410-b5e6-96231b3b80d8
due to x86 encoding restrictions. This is currently off by default
because it may cause code quality regressions. This is for PR4572.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77565 91177308-0d34-0410-b5e6-96231b3b80d8
for now. Make the section switching directives more consistent
by not including \n and including \t for them all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77107 91177308-0d34-0410-b5e6-96231b3b80d8
and make it more aggressive, we now put:
const int G2 __attribute__((weak)) = 42;
into the text (readonly) segment like gcc, previously we put
it into the data (readwrite) segment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77104 91177308-0d34-0410-b5e6-96231b3b80d8
dumping ground of various SSE4.1 tests, since filecheck can reasonably
handle them all in one file. Generalize it to check x86-64 stuff as
well since it has a different ABI (a convenient way to test both the
reg and mem forms of these instructions).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76848 91177308-0d34-0410-b5e6-96231b3b80d8
Getelementptrs that are defined to wrap are virtually useless to
optimization, and getelementptrs that are undefined on any kind
of overflow are too restrictive -- it's difficult to ensure that
all intermediate addresses are within bounds. I'm going to take
a different approach.
Remove a few optimizations that depended on this flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76437 91177308-0d34-0410-b5e6-96231b3b80d8
Inline asm instructions may have additional <imp-def,kill> register operands.
These operands are not marked with a flag like the normal asm operands, so we
must not assert that there is a flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76373 91177308-0d34-0410-b5e6-96231b3b80d8
stack alignment right when it is. This is not
ideal but conservatively correct. Adjust a test
to compensate for changed stack offset value.
gcc.apple/asm-block-57.c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76120 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid remat'ing instructions whose def have sub-register indices for now. It's just really really hard to get all the cases right.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75900 91177308-0d34-0410-b5e6-96231b3b80d8
additional bug fixes:
1. The bug that everyone hit was a problem in the asmprinter where it
would remove $stub but keep the L prefix on a name when emitting the
indirect symbol. This is easy to fix by keeping the name of the stub
and the name of the symbol in a StringMap instead of just keeping a
StringSet and trying to reconstruct it late.
2. There was a problem printing the personality function. The current
logic to print out the personality function from the DWARF information
is a bit of a cesspool right now that duplicates a bunch of other
logic in the asm printer. The short version of it is that it depends
on emitting both the L and _ prefix for symbols (at least on darwin)
and until I can untangle it, it is best to switch the mangler back to
emitting both prefixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75646 91177308-0d34-0410-b5e6-96231b3b80d8
unbreaking llvm-gcc (on Darwin).
--- Reverse-merging r75620 into '.':
U include/llvm/Support/Mangler.h
--- Reverse-merging r75610 into '.':
U test/CodeGen/X86/loop-hoist.ll
G include/llvm/Support/Mangler.h
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U lib/VMCore/Mangler.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75636 91177308-0d34-0410-b5e6-96231b3b80d8
to symbols instead of doing it with "printSuffixedName". This gets us to the point
where there is a real separation between computing a symbol name and printing it,
something I need for MC printer stuff.
This patch also fixes a corner case bug where unnamed private globals wouldn't get
the private label prefix.
Next up, rename all uses of getValueName -> getMangledName for better greppability,
and then tackle the ppc/arm backends to eliminate "printSuffixedName".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75610 91177308-0d34-0410-b5e6-96231b3b80d8
indicates whether the label is private or not, instead of taking
prefix stuff. One effect of this is that symbols will be generated
with *just* the private prefix, instead of both the private prefix
*and* the user-label-prefix, but this doesn't matter as long as it
is consistent. For example we'll now get "Lfoo" instead of "L_foo".
These are just assembler temporary labels anyway, so they never even
make it into the .o file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75607 91177308-0d34-0410-b5e6-96231b3b80d8
1) unique globals with the existing "Count" local in Mangler, not with
atomic nonsense. Using atomics will give us nondeterminstic output
from the compiler when using multiple threads, which is bad.
2) Do not mangle an unknown global name with a type suffix. We don't
need this anymore now that llvm ir doesn't have type planes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75541 91177308-0d34-0410-b5e6-96231b3b80d8
of lea. It is better for code size (and presumably efficiency) to use:
movl $foo, %eax
rather than:
leal foo, eax
Both give a nice zero extending "move immediate" instruction, the former is just
smaller. Note that global addresses should be handled different by the x86
backend, but I chose to follow the style already in place and add more fixme's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75403 91177308-0d34-0410-b5e6-96231b3b80d8
Basically, using:
lea symbol(%rip), %rax
is not valid in -static mode, because the current RIP may not be
within 32-bits of "symbol" when an app is built partially pic and
partially static. The fix for this is to compile it to:
lea symbol, %rax
It would be better to codegen this as:
movq $symbol, %rax
but that will come next.
The hard part of fixing this bug was fixing abi-isel, which was actively
testing for the wrong behavior. Also, the RUN lines are completely impossible
to understand what they are testing. To help with this, convert the -static
x86-64 codegen tests to use filecheck. This is much more stable and makes it
more clear what the codegen is expected to be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75382 91177308-0d34-0410-b5e6-96231b3b80d8
value. Adjust other code to deal with that correctly. Make
DAGTypeLegalizer::PromoteIntRes_EXTRACT_VECTOR_ELT take advantage of
this new flexibility to simplify the code and make it deal with unusual
vectors (like <4 x i1>) correctly. Fixes PR3037.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75176 91177308-0d34-0410-b5e6-96231b3b80d8
registers based on dynamic conditions. For example, X86 EBP/RBP, when used as
frame register has to be spilled in the first fixed object. It should inform
PEI this so it doesn't get allocated another stack object. Also, it should not
be spilled as other callee-saved registers but rather its spilling and restoring
are being handled by emitPrologue and emitEpilogue. Avoid spilling it twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75116 91177308-0d34-0410-b5e6-96231b3b80d8
* remove some old code that was needed when we'd put ESP in the scale instead of
the base of some instructions.
* Fix a bug with the P modifier in inline asm that caused us to drop it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75077 91177308-0d34-0410-b5e6-96231b3b80d8
VSETCC must define all bits, which is different than it was documented
to before. Since all targets that implement VSETCC already have this
behavior, and we don't optimize based on this, just change the
documentation. We now get nice code for vec_compare.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74978 91177308-0d34-0410-b5e6-96231b3b80d8
finishes off enough support for vector compares to get the icmp/fcmp
version of 2008-07-23-VSetCC.ll passing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74961 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid unnecessary duplication of operand 0 of X86::FpSET_ST0_80. This duplication would
cause one register to remain on the stack at the function return.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74534 91177308-0d34-0410-b5e6-96231b3b80d8
Not sure I understand how the temp register gets used,
but this fixes a bug and introduces no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74446 91177308-0d34-0410-b5e6-96231b3b80d8
implementation primarily differs from the former in that the asmprinter
doesn't make a zillion decisions about whether or not something will be
RIP relative or not. Instead, those decisions are made by isel lowering
and propagated through to the asm printer. To achieve this, we:
1. Represent RIP relative addresses by setting the base of the X86 addr
mode to X86::RIP.
2. When ISel Lowering decides that it is safe to use RIP, it lowers to
X86ISD::WrapperRIP. When it is unsafe to use RIP, it lowers to
X86ISD::Wrapper as before.
3. This removes isRIPRel from X86ISelAddressMode, representing it with
a basereg of RIP instead.
4. The addressing mode matching logic in isel is greatly simplified.
5. The asmprinter is greatly simplified, notably the "NotRIPRel" predicate
passed through various printoperand routines is gone now.
6. The various symbol printing routines in asmprinter now no longer infer
when to emit (%rip), they just print the symbol.
I think this is a big improvement over the previous situation. It does have
two small caveats though: 1. I implemented a horrible "no-rip" modifier for
the inline asm "P" constraint modifier. This is a short term hack, there is
a much better, but more involved, solution. 2. I had to xfail an
-aggressive-remat testcase because it isn't handling the use of RIP in the
constant-pool reading instruction. This specific test is easy to fix without
-aggressive-remat, which I intend to do next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74372 91177308-0d34-0410-b5e6-96231b3b80d8
trip counts in more cases.
Generalize ScalarEvolution's isLoopGuardedByCond code to recognize
And and Or conditions, splitting the code out into an
isNecessaryCond helper function so that it can evaluate Ands and Ors
recursively, and make SCEVExpander be much more aggressive about
hoisting instructions out of loops.
test/CodeGen/X86/pr3495.ll has an additional instruction now, but
it appears to be due to an arbitrary register allocation difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74048 91177308-0d34-0410-b5e6-96231b3b80d8
a global with that gets printed with the :mem modifier. All operands to lea's
should be handled with the lea32mem operand kind, and this allows the TLS stuff
to do this. There are several better ways to do this, but I went for the minimal
change since I can't really test this (beyond make check).
This also makes the use of EBX explicit in the operand list in the 32-bit,
instead of implicit in the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73834 91177308-0d34-0410-b5e6-96231b3b80d8
as signed max tests. Along with r73717, this helps CodeGen avoid
emitting code for a maximum operation for this class of loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73718 91177308-0d34-0410-b5e6-96231b3b80d8
casted induction variables in cases where the cast
isn't foldable. It ended up being a pessimization in
many cases. This could be fixed, but it would require
a bunch of complicated code in IVUsers' clients. The
advantages of this approach aren't visible enough to
justify it at this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73706 91177308-0d34-0410-b5e6-96231b3b80d8
support for x86, and UMULO/SMULO for many architectures, including PPC
(PR4201), ARM, and Cell. The resulting expansion isn't perfect, but it's
not bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73477 91177308-0d34-0410-b5e6-96231b3b80d8
incomming chain of the RETURN node. The incomming chain must
be the outgoing chain of the CALL node. This causes the
backend to identify tail calls that are not tail calls. This
patch fixes this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73387 91177308-0d34-0410-b5e6-96231b3b80d8
out of sync with regular cc.
The only difference between the tail call cc and the normal
cc was that one parameter register - R9 - was reserved for
calling functions through a function pointer. After time the
tail call cc has gotten out of sync with the regular cc.
We can use R11 which is also caller saved but not used as
parameter register for potential function pointers and
remove the special tail call cc on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73233 91177308-0d34-0410-b5e6-96231b3b80d8
on x86 to handle more cases. Fix a bug in said code that would cause it
to read past the end of an object. Rewrite the code in
SelectionDAGLegalize::ExpandBUILD_VECTOR to be a bit more general.
Remove PerformBuildVectorCombine, which is no longer necessary with
these changes. In addition to simplifying the code, with this change,
we can now catch a few more cases of consecutive loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73012 91177308-0d34-0410-b5e6-96231b3b80d8
nodes for vectors with an i16 element type. Add an optimization for
building a vector which is all zeros/undef except for the bottom
element, where the bottom element is an i8 or i16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72988 91177308-0d34-0410-b5e6-96231b3b80d8
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72957 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72894 91177308-0d34-0410-b5e6-96231b3b80d8
