with writeback, things like "sp!", etc. Also added some more stuff to the
temporarily hacked methods ARMAsmParser::MatchRegisterName and
ARMAsmParser::MatchInstruction to allow more parser testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83477 91177308-0d34-0410-b5e6-96231b3b80d8
a virtual register to eliminate a frame index, it can return that register
and the constant stored there to PEI to track. When scavenging to allocate
for those registers, PEI then tracks the last-used register and value, and
if it is still available and matches the value for the next index, reuses
the existing value rather and removes the re-materialization instructions.
Fancier tracking and adjustment of scavenger allocations to keep more
values live for longer is possible, but not yet implemented and would likely
be better done via a different, less special-purpose, approach to the
problem.
eliminateFrameIndex() is modified so the target implementations can return
the registers they wish to be tracked for reuse.
ARM Thumb1 implements and utilizes the new mechanism. All other targets are
simply modified to adjust for the changed eliminateFrameIndex() prototype.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83467 91177308-0d34-0410-b5e6-96231b3b80d8
operands. Some parsing of arm memory operands for preindexing and postindexing
forms including with register controled shifts. This is a work in progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83424 91177308-0d34-0410-b5e6-96231b3b80d8
verbose-asm mode, print comments instead. This eliminates a non-comment
difference between verbose-asm mode and non-verbose-asm mode.
Also, factor out the relevant code out of all the targets and into
target-independent code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83392 91177308-0d34-0410-b5e6-96231b3b80d8
spill slot. When frame references are via the frame pointer, they will be
negative, but Thumb1 load/store instructions only allow positive immediate
offsets. Instead, Thumb1 will spill to R12.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83336 91177308-0d34-0410-b5e6-96231b3b80d8
the new predicates I added) instead of going through a context and doing a
pointer comparison. Besides being cheaper, this allows a smart compiler
to turn the if sequence into a switch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83297 91177308-0d34-0410-b5e6-96231b3b80d8
Add a new TargetLoweringObjectFileMachO::getConstTextCoalSection method to
get access to that section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83178 91177308-0d34-0410-b5e6-96231b3b80d8
to emit target-specific things at the beginning of the asm output. This
fixes a problem for PPC, where the text sections are not being kept together
as expected. The base class doInitialization code calls DW->BeginModule()
which emits a bunch of DWARF section directives. The PPC doInitialization
code then emits all the TEXT section directives, with the intention that they
will be kept together. But as I understand it, the Darwin assembler treats
the default TEXT section as a special case and moves it to the beginning of
the file, which means that all those DWARF sections are in the middle of
the text. With this change, the EmitStartOfAsmFile hook is called before
the DWARF section directives are emitted, so that all the PPC text section
directives come out right at the beginning of the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83176 91177308-0d34-0410-b5e6-96231b3b80d8
for derived AsmPrinters to add another one. In some cases, fixing this
removes the need to override the doInitialization method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83170 91177308-0d34-0410-b5e6-96231b3b80d8
section directives. This causes the assembler to put the text sections at
the beginning of the object file, which helps work around a limitation of the
Darwin ARM relocations. Radar 7255355.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83127 91177308-0d34-0410-b5e6-96231b3b80d8
unused DECLARE instruction.
KILL is not yet used anywhere, it will replace TargetInstrInfo::IMPLICIT_DEF
in the places where IMPLICIT_DEF is just used to alter liveness of physical
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83006 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, it is always set to "default", which prevents debug info from
even being generated during isel. Radar 7250345.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82988 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. This makes it re-materializable.
Thumb2 will split it back out into two instructions so IT pass will generate the
right mask. Also, this expose opportunies to optimize the movw to a 16-bit move.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82982 91177308-0d34-0410-b5e6-96231b3b80d8
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82794 91177308-0d34-0410-b5e6-96231b3b80d8
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82790 91177308-0d34-0410-b5e6-96231b3b80d8
For the AAPCS ABI, SP must always be 4-byte aligned, and at any "public
interface" it must be 8-byte aligned. For the older ARM APCS ABI, the stack
alignment is just always 4 bytes. For X86, we currently align SP at
entry to a function (e.g., to 16 bytes for Darwin), but no stack alignment
is needed at other times, such as for a leaf function.
After discussing this with Dan, I decided to go with the approach of adding
a new "TransientStackAlignment" field to TargetFrameInfo. This value
specifies the stack alignment that must be maintained even in between calls.
It defaults to 1 except for ARM, where it is 4. (Some other targets may
also want to set this if they have similar stack requirements. It's not
currently required for PPC because it sets targetHandlesStackFrameRounding
and handles the alignment in target-specific code.) The existing StackAlignment
value specifies the alignment upon entry to a function, which is how we've
been using it anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82767 91177308-0d34-0410-b5e6-96231b3b80d8
interest for this, as it currently reserves a register rather than using
the scavenger for matierializing constants as needed.
Instead of scavenging registers on the fly while eliminating frame indices,
new virtual registers are created, and then a scavenged collectively in a
post-pass over the function. This isolates the bits that need to interact
with the scavenger, and sets the stage for more intelligent use, and reuse,
of scavenged registers.
For the time being, this is disabled by default. Once the bugs are worked out,
the current scavenging calls in replaceFrameIndices() will be removed and
the post-pass scavenging will be the default. Until then,
-enable-frame-index-scavenging enables the new code. Currently, only the
Thumb1 back end is set up to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82734 91177308-0d34-0410-b5e6-96231b3b80d8
VLDM/VSTM instructions, and without this check, the code assumes that an
offset is allowed, as it would be with VLDR/VSTR. The asm printer,
however, silently drops the offset, producing incorrect code. Since the
address register in this case is either the stack or frame pointer, the
spill location ends up conflicting with some other stack slot or with
outgoing arguments on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81879 91177308-0d34-0410-b5e6-96231b3b80d8
parses the .word directive as 4 bytes and ARMAsmParser::ParseInstruction will
give an error is called. Broke out the test of the .word directive into two
different test cases, one for x86 and one for arm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81817 91177308-0d34-0410-b5e6-96231b3b80d8
now that printBasicBlockLabel is only used for starting
a MBB. This allows elimination of a bunch of arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81684 91177308-0d34-0410-b5e6-96231b3b80d8
the MCInst path of the asmprinter. Instead, pull comment printing
out of the autogenerated asmprinter into each target that uses the
autogenerated asmprinter. This causes code duplication into each
target, but in a way that will be easier to clean up later when more
asmprinter stuff is commonized into the base AsmPrinter class.
This also fixes an xcore strangeness where it inserted two tabs
before every instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81396 91177308-0d34-0410-b5e6-96231b3b80d8
asm printer into the "printInstruction" routine. This
fixes a problem where the experimental asmprinter would
drop debug labels in some cases, and fixes issues on ppc/xcore
where pseudo instructions like "mr" didn't get debug locs properly.
It is annoying that this moves the call from one place into each
target, but a future set of more invasive refactorings will fix
that problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81377 91177308-0d34-0410-b5e6-96231b3b80d8
makes an eggregious hack somewhat more palatable. Bringing the LSDA forward
and making it a GV available for reference would be even better, but is
beyond the scope of what I'm looking to solve at this point.
Objective C++ code could generate function names that broke the previous
scheme. This fixes that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80649 91177308-0d34-0410-b5e6-96231b3b80d8
The instructions can be selected directly from the intrinsics. We will need
to add some ARM-specific nodes for VLD/VST of 3 and 4 128-bit vectors, but
those are not yet implemented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80117 91177308-0d34-0410-b5e6-96231b3b80d8
all Darwin targets; could be split into separate tests for
the chip subdirectories, but from Chris' last mail on testing
I assume he'd rather have only one test. Generic seems to be
the best available, maybe there should be a Darwin subdirectory?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79877 91177308-0d34-0410-b5e6-96231b3b80d8
MachineInstr and MachineOperand. This required eliminating a
bunch of stuff that was using DOUT, I hope that bill doesn't
mind me stealing his fun. ;-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79813 91177308-0d34-0410-b5e6-96231b3b80d8
several things other than Neon vector lane numbers. For inline assembly
operands with a "c" print code, check that they really are immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79676 91177308-0d34-0410-b5e6-96231b3b80d8
vector shuffles. Temporarily remove the tests for these operations until the
new implementation is working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79579 91177308-0d34-0410-b5e6-96231b3b80d8
This is derived from a patch by Anton Korzh. I modified it to recognize
the VEXT shuffles during legalization and lower them to a target-specific
DAG node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79428 91177308-0d34-0410-b5e6-96231b3b80d8
- Drop the Candidates argument and fix all callers. Now that RegScavenger
tracks available registers accurately, there is no need to restict the
search.
- Make sure that no aliases of the found register are in use. This was a potential bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79369 91177308-0d34-0410-b5e6-96231b3b80d8
support unaligned mem access only for certain types. (Should it be size
instead?)
ARM v7 supports unaligned access for i16 and i32, some v6 variants support it
as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79127 91177308-0d34-0410-b5e6-96231b3b80d8
libcall. Take advantage of this in the ARM backend to rectify broken
choice of CC when hard float is in effect. PIC16 may want to see if
it could be of use in MakePIC16Libcall, which works unchanged.
Patch by Sandeep!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79033 91177308-0d34-0410-b5e6-96231b3b80d8
implemented so far) are recognized during legalization, it is easy to fall
back to the default expansion for other shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78995 91177308-0d34-0410-b5e6-96231b3b80d8
scalar_to_vector. Generate these VDUP nodes during legalization instead
of trying to recognize the pattern during selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78994 91177308-0d34-0410-b5e6-96231b3b80d8
target-specific VDUPLANE nodes. This allows the subreg handling for the
quad-register version to be done easily with Pats in the .td file, instead
of with custom code in ARMISelDAGToDAG.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78993 91177308-0d34-0410-b5e6-96231b3b80d8
x86_64-apple-darwin10.
--- Reverse-merging r78895 into '.':
U test/CodeGen/PowerPC/2008-12-12-EH.ll
U lib/Target/DarwinTargetAsmInfo.cpp
--- Reverse-merging r78892 into '.':
U include/llvm/Target/DarwinTargetAsmInfo.h
U lib/Target/X86/X86TargetAsmInfo.cpp
U lib/Target/X86/X86TargetAsmInfo.h
U lib/Target/ARM/ARMTargetAsmInfo.h
U lib/Target/ARM/ARMTargetMachine.cpp
U lib/Target/ARM/ARMTargetAsmInfo.cpp
U lib/Target/PowerPC/PPCTargetAsmInfo.cpp
U lib/Target/PowerPC/PPCTargetAsmInfo.h
U lib/Target/PowerPC/PPCTargetMachine.cpp
G lib/Target/DarwinTargetAsmInfo.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78919 91177308-0d34-0410-b5e6-96231b3b80d8
syntactically as a string, very similiar to what Chris did with MachO.
The parsing support and validation is not introduced yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78890 91177308-0d34-0410-b5e6-96231b3b80d8
