An invoke may require a table entry. For instance, when the function it calls
is expected to throw.
<rdar://problem/13360379>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176827 91177308-0d34-0410-b5e6-96231b3b80d8
We want vectorization to happen at -g. Ignore calls to the dbg.value intrinsic
and don't transfer them to the vectorized code.
radar://13378964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176768 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
This pass hasn't been touched in two years & would fail with assertions against
the current debug info metadata format (the only test case for it still uses a
many-versions old debug info metadata format)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176707 91177308-0d34-0410-b5e6-96231b3b80d8
To find the last use of a register unit, start from the bottom and scan
upwards until a user is found.
<rdar://problem/13353090>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176706 91177308-0d34-0410-b5e6-96231b3b80d8
fold selectcc (selectcc x, y, a, b, cc), b, a, b, setne ->
selectcc x, y, a, b, cc
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176700 91177308-0d34-0410-b5e6-96231b3b80d8
Two changes:
1. Prefer SET* instructions when possible
2. Handle the CND*_INT case with floating-point args
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176699 91177308-0d34-0410-b5e6-96231b3b80d8
Code generation makes some basic assumptions about the IR it's been given. In
particular, if there is only one 'invoke' in the function, then that invoke
won't be going away. However, with the advent of the `llvm.donothing' intrinsic,
those invokes may go away. If all of them go away, the landing pad no longer has
any users. This confuses the back-end, which asserts.
This happens with SjLj exceptions, because that's the model that modifies the IR
based on there being invokes, etc. in the function.
Remove any invokes of `llvm.donothing' during SjLj EH preparation. This will
give us a CFG that the back-end won't be confused about. If all of the invokes
in a function are removed, then the SjLj EH prepare pass won't insert the bogus
code the relies upon the invokes being there.
<rdar://problem/13228754&13316637>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176677 91177308-0d34-0410-b5e6-96231b3b80d8
Mostly this is just changing the named metadata (llvm.dbg.sp, llvm.dbg.gv,
llvm.dbg.<func>.lv, etc -> llvm.dbg.cu), adding a few fields to older records
(DIVariable: flags/inlined-at, DICompileUnit: sp/gv/types,
DISubprogram: local variables list)
The tests to update were discovered by a change I'm working on to remove debug
info version support - so any tests using old debug info versions I haven't
updated probably are bad tests or just not actually designed to test debug
info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176671 91177308-0d34-0410-b5e6-96231b3b80d8
That can usually be lowered efficiently and is common in sandybridge code.
It would be nice to do this in DAGCombiner but we can't insert arbitrary
BUILD_VECTORs this late.
Fixes PR15462.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176634 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176605 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes rdar:13349374.
Volatile loads and stores need to be preserved even if the language
standard says they are undefined. "volatile" in this context means "get
out of the way compiler, let my platform handle it".
Additionally, this is the only way I know of with llvm to write to the
first page (when hardware allows) without dropping to assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176599 91177308-0d34-0410-b5e6-96231b3b80d8
- Phi nodes should be replaced/updated after lowering CMOV into branch
because 'mainMBB' updating operand in Phi node is changed.
- Add EFLAGS in livein before lowering the 2nd CMOV. It's necessary as
we will reuse the EFLAGS generated before the 1st lowered CMOV, which
won't clobber EFLAGS. However, we need explicitly specify that.
- '-attr=-cmov' test case are added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176598 91177308-0d34-0410-b5e6-96231b3b80d8
The "invariant.load" metadata indicates the memory unit being accessed is immutable.
A load annotated with this metadata can be moved across any store.
As I am not sure if it is legal to move such loads across barrier/fence, this
change dose not allow such transformation.
rdar://11311484
Thank Arnold for code review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176562 91177308-0d34-0410-b5e6-96231b3b80d8
When considering folding a bitcast of an alloca into the alloca itself,
make sure we don't shrink the amount of memory being allocated, or
things rapidly go sideways.
rdar://13324424
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176547 91177308-0d34-0410-b5e6-96231b3b80d8
- Clear 'mayStore' flag when loading from the atomic variable before the
spin loop
- Clear kill flag from one use to multiple use in registers forming the
address to that atomic variable
- don't use a physical register as live-in register in BB (neither entry
nor landing pad.) by copying it into virtual register
(patch by Cameron Zwarich)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176538 91177308-0d34-0410-b5e6-96231b3b80d8
This calling convention was added just to handle functions which return vector
of floats. The fix committed in r165585 solves the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176530 91177308-0d34-0410-b5e6-96231b3b80d8
one-byte NOPs. If the processor actually executes those NOPs, as it sometimes
does with aligned bundling, this can have a performance impact. From my
micro-benchmarks run on my one machine, a 15-byte NOP followed by twelve
one-byte NOPs is about 20% worse than a 15 followed by a 12. This patch
changes NOP emission to emit as many 15-byte (the maximum) as possible followed
by at most one shorter NOP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176464 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalValue linkage up to ExternalLinkage in the ExtractGV pass. This
prevents linkonce and linkonce_odr symbols from being DCE'd.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176459 91177308-0d34-0410-b5e6-96231b3b80d8
'R' An address that can be sued in a non-macro load or store.
This patch includes a positive test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176452 91177308-0d34-0410-b5e6-96231b3b80d8
* Only apply divide bypass optimization when not optimizing for size.
* Fixed bug caused by constant for 0 value of type Int32,
used dividend type to generate the constant instead.
* For atom x86-64 apply the divide bypass to use 16-bit divides instead of
64-bit divides when operand values are small enough.
* Added lit tests for 64-bit divide bypass.
Patch by Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176442 91177308-0d34-0410-b5e6-96231b3b80d8
This adds minimalistic support for PHI nodes to llvm.objectsize() evaluation
fingers crossed so that it does break clang boostrap again..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176408 91177308-0d34-0410-b5e6-96231b3b80d8
This matters for example in following matrix multiply:
int **mmult(int rows, int cols, int **m1, int **m2, int **m3) {
int i, j, k, val;
for (i=0; i<rows; i++) {
for (j=0; j<cols; j++) {
val = 0;
for (k=0; k<cols; k++) {
val += m1[i][k] * m2[k][j];
}
m3[i][j] = val;
}
}
return(m3);
}
Taken from the test-suite benchmark Shootout.
We estimate the cost of the multiply to be 2 while we generate 9 instructions
for it and end up being quite a bit slower than the scalar version (48% on my
machine).
Also, properly differentiate between avx1 and avx2. On avx-1 we still split the
vector into 2 128bits and handle the subvector muls like above with 9
instructions.
Only on avx-2 will we have a cost of 9 for v4i64.
I changed the test case in test/Transforms/LoopVectorize/X86/avx1.ll to use an
add instead of a mul because with a mul we now no longer vectorize. I did
verify that the mul would be indeed more expensive when vectorized with 3
kernels:
for (i ...)
r += a[i] * 3;
for (i ...)
m1[i] = m1[i] * 3; // This matches the test case in avx1.ll
and a matrix multiply.
In each case the vectorized version was considerably slower.
radar://13304919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176403 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopVectorizer often runs multiple times on the same function due to inlining.
When this happens the loop vectorizer often vectorizes the same loops multiple times, increasing code size and adding unneeded branches.
With this patch, the vectorizer during vectorization puts metadata on scalar loops and marks them as 'already vectorized' so that it knows to ignore them when it sees them a second time.
PR14448.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176399 91177308-0d34-0410-b5e6-96231b3b80d8
This patch eliminates the need to emit a constant move instruction when this
pattern is matched:
(select (setgt a, Constant), T, F)
The pattern above effectively turns into this:
(conditional-move (setlt a, Constant + 1), F, T)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176384 91177308-0d34-0410-b5e6-96231b3b80d8
Also removed the comments of "should produce..." because they completely
don't match the actually produced output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176381 91177308-0d34-0410-b5e6-96231b3b80d8
detail.
The was this test was written, it was relying on an implementation detail
(fixups) and hence was very brittle (relying, among other things, on the
exact ordering of statistics printed by MC).
The test was rewritten to check a more observable output difference. While it
doesn't cover 100% of the things the original test covered, it's a good
practice to write regression tests this way. If we want to check that
internal details and invariants hold, such tests should be expressed as unit
tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176377 91177308-0d34-0410-b5e6-96231b3b80d8
The make (all) target takes care of creating lit configs and auto-generating
tests. The problem with the original 'lit.site.cfg' target is it's not
recursive and doesn't fully create everything necessary for testing
clang-tools-extra.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176374 91177308-0d34-0410-b5e6-96231b3b80d8
- These tests wont't crash on trunk but would be better to add them so that
they don't break again in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176369 91177308-0d34-0410-b5e6-96231b3b80d8
- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
but TLI.getShiftAmountTy() so far only return scalar type. As a
result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
return target-specificed scalar type or the same vector type as the
1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176364 91177308-0d34-0410-b5e6-96231b3b80d8
dispatch code. As far as I can tell the thumb2 code is behaving as expected.
I was able to compile and run the associated test case for both arm and thumb1.
rdar://13066352
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176363 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176359 91177308-0d34-0410-b5e6-96231b3b80d8
The instcombine recognized pattern looks like:
a = b * c
d = a +/- Cst
or
a = b * c
d = Cst +/- a
When creating the new operands for fadd or fsub instruction following the related fmul, the first operand was created with the second original operand (M0 was created with C1) and the second with the first (M1 with Opnd0).
The fix consists in creating the new operands with the appropriate original operand, i.e., M0 with Opnd0 and M1 with C1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176300 91177308-0d34-0410-b5e6-96231b3b80d8
We make the cost for calling libm functions extremely high as emitting the
calls is expensive and causes spills (on x86) so performance suffers. We still
vectorize important calls like ceilf and friends on SSE4.1. and fabs.
Differential Revision: http://llvm-reviews.chandlerc.com/D466
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176287 91177308-0d34-0410-b5e6-96231b3b80d8
The work done by the post-encoder (setting architecturally unused bits to 0 as
required) can be done by the existing operand that covers the "#0.0". This
removes at least one use of the discouraged PostEncoderMethod uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176261 91177308-0d34-0410-b5e6-96231b3b80d8
If an otherwise weak var is actually defined in this unit, it can't be
undefined at runtime so we can use normal global variable sequences (ADRP/ADD)
to access it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176259 91177308-0d34-0410-b5e6-96231b3b80d8
Shadow checks are disabled and memory loads always produce fully initialized
values in functions that don't have a sanitize_memory attribute. Value and
argument shadow is propagated as usual.
This change also updates blacklist behaviour to match the above.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176247 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the tests that behave differently on llvm-arm-linux buildbot
did so becase the triple wasn't set correctly to armv5, so we can
revert most of the special behaviour added previously. Some tests
still need the special treatment, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176243 91177308-0d34-0410-b5e6-96231b3b80d8
definition DIE (TAG_variable), and put AT_MIPS_linkage_name to TAG_member when
DarwinGDBCompat is true.
Darwin GDB needs AT_MIPS_linkage_name at both places to work.
Follow-up patch to r176143.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176220 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue where trying to assemlbe valid ADR instructions would cause
LLVM to hit a failed assertion.
Patch by Keith Walker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176189 91177308-0d34-0410-b5e6-96231b3b80d8
This properly asks TargetLibraryInfo if a call is available and if it is, it
can be translated into the corresponding LLVM builtin. We don't vectorize sqrt()
yet because I'm not sure about the semantics for negative numbers. The other
intrinsic should be exact equivalents to the libm functions.
Differential Revision: http://llvm-reviews.chandlerc.com/D465
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176188 91177308-0d34-0410-b5e6-96231b3b80d8
PR15262 reported a bug where the following instruction:
i8 getelementptr inbounds i8* bitcast ([4 x i8] addrspace(12)* @buf to i8*),
i32 2
was getting folded into:
addrspace(12)* getelementptr inbounds ([4 x i8] addrspace(12)* @buf, i32 0,
i32 2)
This caused instcombine to crash because the original instruction and
the folded instruction have different types. The issue was fixed by
disallowing bitcasts between different address spaces to be folded away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176156 91177308-0d34-0410-b5e6-96231b3b80d8
definition DIE, to make old GDB happy.
We have a regression for old GDB when Clang uses DW_TAG_member to declare
static members inside a class, instead of DW_TAG_variable. This patch will fix
this regression.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176143 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need to generate a stack frame for PPC32 SVR4 when there are
no local variables assigned to the stack, i.e., when no red zone is needed.
(PPC64 supports a red zone, but PPC32 does not.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176124 91177308-0d34-0410-b5e6-96231b3b80d8
TAG_member inside a class to the specification DIE.
Having AT_MIPS_linkage_name on TAG_member caused old gdb (GNU 6.3.50) to
error out. Also gcc 4.7 has AT_MIPS_linkage_name on the specification DIE.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176120 91177308-0d34-0410-b5e6-96231b3b80d8
For integer constants, allow 'L', 'UL' as well as 'ULL' and 'LL'. This provides
better support for shared headers between .s and .c files that define bunches
of constant values.
rdar://9321056
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176118 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC TLS relocation types were not previously added to the
necessary list in MCELFStreamer::fixSymbolsInTLSFixups(). Now they are!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176094 91177308-0d34-0410-b5e6-96231b3b80d8
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176075 91177308-0d34-0410-b5e6-96231b3b80d8
- Check whether SSE is available before lowering all 1s vector building with
PCMPEQD, which is only available from SSE2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176058 91177308-0d34-0410-b5e6-96231b3b80d8
fewer scalar integer (i32 or i64) arguments. It completely eliminates the need
for SDISel for trivial functions.
Also, add the new llc -fast-isel-abort-args option, which is similar to
-fast-isel-abort option, but for formal argument lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176052 91177308-0d34-0410-b5e6-96231b3b80d8
memory intrinsics in the SDAG builder.
When alignment is zero, the lang ref says that *no* alignment
assumptions can be made. This is the exact opposite of the internal API
contracts of the DAG where alignment 0 indicates that the alignment can
be made to be anything desired.
There is another, more explicit alignment that is better suited for the
role of "no alignment at all": an alignment of 1. Map the intrinsic
alignment to this early so that we don't end up generating aligned DAGs.
It is really terrifying that we've never seen this before, but we
suddenly started generating a large number of alignment 0 memcpys due to
the new code to do memcpy-based copying of POD class members. That patch
contains a bug that rounds bitfield alignments down when they are the
first field. This can in turn produce zero alignments.
This fixes weird crashes I've seen in library users of LLVM on 32-bit
hosts, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176022 91177308-0d34-0410-b5e6-96231b3b80d8
This is a common pattern with dyn_cast and similar constructs, when the
PHI no longer depends on the select it can often be turned into a simpler
construct or even get hoisted out of the loop.
PR15340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175995 91177308-0d34-0410-b5e6-96231b3b80d8
The Printer will now print instructions with the correct alignment specifier syntax, like
vld1.8 {d16}, [r0:64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175884 91177308-0d34-0410-b5e6-96231b3b80d8
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175877 91177308-0d34-0410-b5e6-96231b3b80d8
It was incorrectly checking a Function* being an IntrinsicInst* which
isn't possible. It should always have been checking the CallInst* instead.
Added test case for x86 which ensures we only get one constant load.
It was 2 before this change.
rdar://problem/13267920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175853 91177308-0d34-0410-b5e6-96231b3b80d8
to lib/DebugInfo, with dumping in llvm-dwarfdump. This patch adds
initial ability to parse and dump CFA instructions contained in
entries.
To keep it manageable, the patch omits some more advanced capabilities
(accounted in TODOs):
* Parsing of instructions with BLOCK arguments (expression lists)
* Dumping of actual instruction arguments (currently only names are
dumped). This is quite tricky since the dumper has to effectively
"interpret" the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175820 91177308-0d34-0410-b5e6-96231b3b80d8
Storing the load/store instructions with the values
and inspect them using Alias Analysis to make sure
they don't alias, since the GEP pointer operand doesn't
take the offset into account.
Trying hard to not add any extra cost to loads and stores
that don't overlap on global values, AA is *only* calculated
if all of the previous attempts failed.
Using biggest vector register size as the stride for the
vectorization access, as we're being conservative and
the cost model (which calculates the real vectorization
factor) is only run after the legalization phase.
We might re-think this relationship in the future, but
for now, I'd rather be safe than sorry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175818 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some problems with too conservative checking where we were
marking all aliases of a register as used, and then also checking all
aliases when allocating a register.
<rdar://problem/13249625>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175782 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model is identical to medium code model except that the
addis/addi sequence for "local" accesses is never used. All accesses
use the addis/ld sequence.
The coding changes are straightforward; most of the patch is taken up
with creating variants of the medium model tests for large model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175767 91177308-0d34-0410-b5e6-96231b3b80d8
A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175759 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes for-loop.cl piglit test
Patch By: Vincent Lejeune
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
NOTE: This is a candidate for the Mesa stable branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175742 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175733 91177308-0d34-0410-b5e6-96231b3b80d8
there were inline br .+4 instructions. Soon everything can enjoy the
full instruction scheduling experience.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175718 91177308-0d34-0410-b5e6-96231b3b80d8
The constructs %hi() and %lo() represent the high and low 16
bits of the address.
Because the 16 bit offset field of an LW instruction is
interpreted as signed, if bit 15 of the low part is 1 then the
low part will act as a negative and 1 needs to be added to the
high part.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175707 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the PPCDAGToDAGISel::PostprocessISelDAG virtual
method to perform post-selection peephole optimizations on the DAG
representation.
One optimization is implemented here: folds to clean up complex
addressing expressions for thread-local storage and medium code
model. It will also be useful for large code model sequences when
those are added later. I originally thought about doing this on the
MI representation prior to register assignment, but it's difficult to
do effective global dead code elimination at that point. DCE is
trivial on the DAG representation.
A typical example of a candidate code sequence in assembly:
addis 3, 2, globalvar@toc@ha
addi 3, 3, globalvar@toc@l
lwz 5, 0(3)
When the final instruction is a load or store with an immediate offset
of zero, the offset from the add-immediate can replace the zero,
provided the relocation information is carried along:
addis 3, 2, globalvar@toc@ha
lwz 5, globalvar@toc@l(3)
Since the addi can in general have multiple uses, we need to only
delete the instruction when the last use is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175697 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips specific standalone assembler directive "set at".
This directive changes the general purpose register
that the assembler will use when given the symbolic
register name $at.
This does not include negative testing. That will come
in a future patch.
A side affect of this patch recognizes the different
GPR register names for temporaries between old abi
and new abi so a test case for that is included.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175686 91177308-0d34-0410-b5e6-96231b3b80d8
(2xi32) (truncate ((2xi64) bitcast (buildvector i32 a, i32 x, i32 b, i32 y)))
can be folded into a (2xi32) (buildvector i32 a, i32 b).
Such a DAG would cause uneccessary vdup instructions followed by vmovn
instructions.
We generate this code on ARM NEON for a setcc olt, 2xf64, 2xf64. For example, in
the vectorized version of the code below.
double A[N];
double B[N];
void test_double_compare_to_double() {
int i;
for(i=0;i<N;i++)
A[i] = (double)(A[i] < B[i]);
}
radar://13191881
Fixes bug 15283.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175670 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the cases where the 6-bit splat element is odd, converting
to a three-instruction sequence to add or subtract two splats. With this
fix, the XFAIL in test/CodeGen/PowerPC/vec_constants.ll is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175663 91177308-0d34-0410-b5e6-96231b3b80d8
- When extloading from a vector with non-byte-addressable element, e.g.
<4 x i1>, the current logic breaks. Extend the current logic to
fix the case where the element type is not byte-addressable by loading
all bytes, bit-extracting/packing each element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175642 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend doesn't handle these correctly. This patch uses logic
similar to that in the X86 and ARM backends to track these arguments
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175635 91177308-0d34-0410-b5e6-96231b3b80d8
Add HexagonMCInst class which adds various Hexagon VLIW annotations.
In addition, this class also includes some APIs related to the
constant extenders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175634 91177308-0d34-0410-b5e6-96231b3b80d8
During lowering of a BUILD_VECTOR, we look for opportunities to use a
vector splat. When the splatted value fits in 5 signed bits, a single
splat does the job. When it doesn't fit in 5 bits but does fit in 6,
and is an even value, we can splat on half the value and add the result
to itself.
This last optimization hasn't been working recently because of improved
constant folding. To circumvent this, create a pseudo VADD_SPLAT that
can be expanded during instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175632 91177308-0d34-0410-b5e6-96231b3b80d8
sext <4 x i1> to <4 x i64>
sext <4 x i8> to <4 x i64>
sext <4 x i16> to <4 x i64>
I'm running Combine on SIGN_EXTEND_IN_REG and revert SEXT patterns:
(sext_in_reg (v4i64 anyext (v4i32 x )), ExtraVT) -> (v4i64 sext (v4i32 sext_in_reg (v4i32 x , ExtraVT)))
The sext_in_reg (v4i32 x) may be lowered to shl+sar operations.
The "sar" does not exist on 64-bit operation, so lowering sext_in_reg (v4i64 x) has no vector solution.
I also added a cost of this operations to the AVX costs table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175619 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible that frame pointer is not found in the
callee saved info, thus FramePtrSpillFI may be incorrect
if we don't check the result of hasFP(MF).
Besides, if we enable the stack coloring algorithm, there
will be an assertion to ensure the slot is live. But in
the test case, %var1 is not live in the prologue of the
function, and we will get the assertion failure.
Note: There is similar code in ARMFrameLowering.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175616 91177308-0d34-0410-b5e6-96231b3b80d8
SltCCRxRy16, SltiCCRxImmX16, SltiuCCRxImmX16, SltuCCRxRy16
$T8 shows up as register $24 when emitted from C++ code so we had
to change some tests that were already there for this functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175593 91177308-0d34-0410-b5e6-96231b3b80d8
MS-style inline assembly.
This is a follow-on to r175334. Forcing a FP to be emitted doesn't ensure it
will be used. Therefore, force the base pointer as well. We now treat MS
inline assembly in the same way we treat functions with dynamic stack
realignment and VLAs. This guarantees the BP will be used to reference
parameters and locals.
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175576 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (o32 abi) specific e_header setting.
EF_MIPS_ABI_O32 needs to be set in the
ELF header flags for o32 abi output.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175569 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (Mips16) specific e_header setting.
EF_MIPS_ARCH_ASE_M16 needs to be set in the
ELF header flags for Mips16.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175566 91177308-0d34-0410-b5e6-96231b3b80d8
When creating an allocation hint for a register pair, make sure the hint
for the physical register reference is still in the allocation order.
rdar://13240556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175541 91177308-0d34-0410-b5e6-96231b3b80d8
Due to the execution order of doFinalization functions, the GC information were
deleted before AsmPrinter::doFinalization was executed. Thus, the
GCMetadataPrinter::finishAssembly was never called.
The patch fixes that by moving the code of the GCInfoDeleter::doFinalization to
Printer::doFinalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175528 91177308-0d34-0410-b5e6-96231b3b80d8
A vectorized sitfp on doubles will get scalarized to a sequence of an
extract_element of <2 x i32>, a bitcast to f32 and a sitofp.
Due to the the extract_element, and the bitcast we will uneccessarily generate
moves between scalar and vector registers.
The patch fixes this by using a COPY_TO_REGCLASS and a EXTRACT_SUBREG to extract
the element from the vector instead.
radar://13191881
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175520 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes asan instrument memory accesses with unusual sizes (e.g. 5 bytes or 10 bytes), e.g. long double or
packed structures.
Instrumentation is done with two 1-byte checks
(first and last bytes) and if the error is found
__asan_report_load_n(addr, real_size) or
__asan_report_store_n(addr, real_size)
is called.
Also, call these two new functions in memset/memcpy
instrumentation.
asan-rt part will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175507 91177308-0d34-0410-b5e6-96231b3b80d8
If the memcpy has an odd length with an alignment of 2, this would incorrectly
assert on the last 1 byte copy.
rdar://13202135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175459 91177308-0d34-0410-b5e6-96231b3b80d8
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175433 91177308-0d34-0410-b5e6-96231b3b80d8
This expansion will be moved to expandISelPseudos as soon as I can figure
out how to do that. There are other instructions which use this
ExpandFEXT_T8I816_ins and as soon as I have finished expanding them all,
I will delete the macro asm string text so it has no way to be used
in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175413 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR15289. This bug was introduced (recently) in r175215; collecting
all std::vector references for candidate pairs to delete at once is invalid
because subsequent lookups in the owning DenseMap could invalidate the
references.
bugpoint was able to reduce a useful test case. Unfortunately, because whether
or not this asserts depends on memory layout, this test case will sometimes
appear to produce valid output. Nevertheless, running under valgrind will
reveal the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175397 91177308-0d34-0410-b5e6-96231b3b80d8
(or (bool?A:B),(bool?C:D)) --> (bool?(or A,C):(or B,D))
By the time the OR is visited, both the SELECTs have been visited and not
optimized and the OR itself hasn't been transformed so we do this transform in
the hopes that the new ORs will be optimized.
The transform is explicitly disabled for vector-selects until "codegen matures
to handle them better".
Patch by Muhammad Tauqir!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175380 91177308-0d34-0410-b5e6-96231b3b80d8
GNU as rejects them and there are configure scripts in the wild that check if
the assembler rejects ".align 3" to determine whether the alignment is in bytes
or powers of two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175360 91177308-0d34-0410-b5e6-96231b3b80d8
If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175334 91177308-0d34-0410-b5e6-96231b3b80d8
When we're recalculating the feature set of the subtarget, we need to have the
ivars in their initial state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175320 91177308-0d34-0410-b5e6-96231b3b80d8
With bundle alignment, instructions all get their own MCFragments
(unless they are in a bundle-locked group). For instructions with
fixups, this is an MCDataFragment. Emitting actual data (e.g. for
.long) attempts to re-use MCDataFragments, which we don't want int
this case since it leads to fragments which exceed the bundle size.
So, don't reuse them in this case.
Also adds a test and fixes some formatting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175316 91177308-0d34-0410-b5e6-96231b3b80d8
- add sincos to runtime library if target triple environment is GNU
- added canCombineSinCosLibcall() which checks that sincos is in the RTL and
if the environment is GNU then unsafe fpmath is enabled (required to
preserve errno)
- extended sincos-opt lit test
Reviewed by: Hal Finkel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175283 91177308-0d34-0410-b5e6-96231b3b80d8
It enables to work with a smaller constant, which is target friendly for those which can compare to immediates.
It also avoids inserting a shift in favor of a trunc, which can be free on some targets.
This used to work until LLVM-3.1, but regressed with the 3.2 release.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175270 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the review suggestion to simplify the AArch64 backend. If we
later discover that we *really* need the extra complexity of the
ConstantIslands pass for performance reasons it can be resurrected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175258 91177308-0d34-0410-b5e6-96231b3b80d8
In the near future litpools will be in a different section, which means that
any access to them is at least two instructions. This makes the case for a
movz/movk pair (if total offset <= 32-bits) even more compelling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175257 91177308-0d34-0410-b5e6-96231b3b80d8
not matter but makes it more gcc compatible which avoids possible subtle
problems. Also, turned back on a disabled check in helloworld.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175237 91177308-0d34-0410-b5e6-96231b3b80d8
assembler should also accept a two arg form, as the docuemntation specifies that
the first (destination) register is optional.
This patch uses TwoOperandAliasConstraint to add the two argument form.
It also fixes an 80-column formatting problem in:
test/MC/ARM/neon-bitwise-encoding
<rdar://problem/12909419> Clang rejects ARM NEON assembly instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175221 91177308-0d34-0410-b5e6-96231b3b80d8
It fixes around 100 tfb piglit tests and 16 glean tests.
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175183 91177308-0d34-0410-b5e6-96231b3b80d8
The parser will now accept instructions with alignment specifiers written like
vld1.8 {d16}, [r0:64]
, while also still accepting the incorrect syntax
vld1.8 {d16}, [r0, :64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175164 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 8b75e6bc35.
The FileCheck tests are not equivalent:
test/CodeGen/X86/tailcall-structret.ll:6:10: error: expected string not found in input
; CHECK: jmp init
^
<stdin>:1:2: note: scanning from here
.section __TEXT,__text,regular,pure_instructions
^
<stdin>:13:2: note: possible intended match here
jmp _init ## TAILCALL
^
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175124 91177308-0d34-0410-b5e6-96231b3b80d8
if the offset fits in 11 bits. This makes use of the fact that the abi
requires sp to be 8 byte aligned so the actual offset can fit in 8
bits. It will be shifted left and sign extended before being actually used.
The assembler or direct object emitter will shift right the 11 bit
signed field by 3 bits. We don't need to deal with that here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175073 91177308-0d34-0410-b5e6-96231b3b80d8
Remove dead functions: renameRegister
Move private member variables from LDV to Impl
Remove ssp/uwtable from testing case
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175072 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed bug in tablegen conversion when source pseudo instruction has
a different number of arguments than the destination instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175066 91177308-0d34-0410-b5e6-96231b3b80d8
This happens when there is both stack realignment and a dynamic alloca in the
function. If we overwrite %esi (rep;movsl uses fixed registers) we'll lose the
base pointer and the next register spill will write into oblivion.
Fixes PR15249 and unbreaks firefox on i386/freebsd. Mozilla uses dynamic allocas
and freebsd a 4 byte stack alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175057 91177308-0d34-0410-b5e6-96231b3b80d8
RegisterCoalescer used to depend on LiveDebugVariable. LDV removes DBG_VALUEs
without emitting them at the end.
We fix this by removing LDV from RegisterCoalescer. Also add an assertion to
make sure we call emitDebugValues if DBG_VALUEs are removed at
runOnMachineFunction.
rdar://problem/13183203
Reviewed by Andy & Jakob
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175023 91177308-0d34-0410-b5e6-96231b3b80d8
This is complicated by backward labels (e.g., 0b can be both a backward label
and a binary zero). The current implementation assumes [0-9]b is always a
label and thus it's possible for 0b and 1b to not be interpreted correctly for
ms-style inline assembly. However, this is relatively simple to fix in the
inline assembly (i.e., drop the [bB]).
This patch also limits backward labels to [0-9]b, so that only 0b and 1b are
ambiguous.
Part of rdar://12470373
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174983 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::ReduceLoadWidth was converting (trunc i32 (shl i64 v, 32))
into (shl i32 v, 32) into undef. To prevent this, check the shift count
against the final result size.
Patch by: Kevin Schoedel
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174972 91177308-0d34-0410-b5e6-96231b3b80d8
Vectors were being manually scalarized by the backend. Instead,
let the target-independent code do all of the work. The manual
scalarization was from a time before good target-independent support
for scalarization in LLVM. However, this forces us to specially-handle
vector loads and stores, which we can turn into PTX instructions that
produce/consume multiple operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174968 91177308-0d34-0410-b5e6-96231b3b80d8
Lower reverse shuffles to a vrev64 and a vext instruction instead of the default
legalization of storing and loading to the stack. This is important because we
generate reverse shuffles in the loop vectorizer when we reverse store to an
array.
uint8_t Arr[N];
for (i = 0; i < N; ++i)
Arr[N - i - 1] = ...
radar://13171760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174929 91177308-0d34-0410-b5e6-96231b3b80d8
This gives a DiagnosticType to all AsmOperands in sight. This replaces all
"invalid operand" diagnostics with something more specific. The messages given
should still be sufficiently vague that they're not usually actively misleading
when LLVM guesses your instruction incorrectly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174871 91177308-0d34-0410-b5e6-96231b3b80d8
Handle chains in which the same offset is used for both loads and
stores to the same array.
Fixes rdar://11410078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174789 91177308-0d34-0410-b5e6-96231b3b80d8
same so we put in the comment field an indicator when we think we are
emitting the 16 bit version. For the direct object emitter, the difference is
important as well as for other passes which need an accurate count of
program size. There will be other similar putbacks to this for various
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174747 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174746 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174741 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174725 91177308-0d34-0410-b5e6-96231b3b80d8
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174724 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
allowed size for the instruction. This code uses RegScavenger to fix this.
We sometimes need 2 registers for Mips16 so we must handle things
differently than how register scavenger is normally used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174696 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions compare two floating point values and return an
integer true (-1) or false (0) value.
When compiling code generated by the Mesa GLSL frontend, the SET*_DX10
instructions save us four instructions for most branch decisions that
use floating-point comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174609 91177308-0d34-0410-b5e6-96231b3b80d8
