now taken care of by the frontend, which allows us to parse arbitrary C/C++
variables.
Part of rdar://13663589
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180037 91177308-0d34-0410-b5e6-96231b3b80d8
-- C.4 and C.5 statements, when NSAA is not equal to SP.
-- C.1.cp statement for VA functions. Note: There are no VFP CPRCs in a
variadic procedure.
Before this patch "NSAA != 0" means "don't use GPRs anymore ". But there are
some exceptions in AAPCS.
1. For non VA function: allocate all VFP regs for CPRC. When all VFPs are allocated
CPRCs would be sent to stack, while non CPRCs may be still allocated in GRPs.
2. Check that for VA functions all params uses GPRs and then stack.
No exceptions, no CPRCs here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180011 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than just splitting the input type and hoping for the best, apply
a bit more cleverness. Just splitting the types until the source is
legal often leads to an illegal result time, which is then widened and a
scalarization step is introduced which leads to truly horrible code
generation. With the loop vectorizer, these sorts of operations are much
more common, and so it's worth extra effort to do them well.
Add a legalization hook for the operands of a TRUNCATE node, which will
be encountered after the result type has been legalized, but if the
operand type is still illegal. If simple splitting of both types
ends up with the result type of each half still being legal, just
do that (v16i16 -> v16i8 on ARM, for example). If, however, that would
result in an illegal result type (v8i32 -> v8i8 on ARM, for example),
we can get more clever with power-two vectors. Specifically,
split the input type, but also widen the result element size, then
concatenate the halves and truncate again. For example on ARM,
To perform a "%res = v8i8 trunc v8i32 %in" we transform to:
%inlo = v4i32 extract_subvector %in, 0
%inhi = v4i32 extract_subvector %in, 4
%lo16 = v4i16 trunc v4i32 %inlo
%hi16 = v4i16 trunc v4i32 %inhi
%in16 = v8i16 concat_vectors v4i16 %lo16, v4i16 %hi16
%res = v8i8 trunc v8i16 %in16
This allows instruction selection to generate three VMOVN instructions
instead of a sequences of moves, stores and loads.
Update the ARMTargetTransformInfo to take this improved legalization
into account.
Consider the simplified IR:
define <16 x i8> @test1(<16 x i32>* %ap) {
%a = load <16 x i32>* %ap
%tmp = trunc <16 x i32> %a to <16 x i8>
ret <16 x i8> %tmp
}
define <8 x i8> @test2(<8 x i32>* %ap) {
%a = load <8 x i32>* %ap
%tmp = trunc <8 x i32> %a to <8 x i8>
ret <8 x i8> %tmp
}
Previously, we would generate the truly hideous:
.syntax unified
.section __TEXT,__text,regular,pure_instructions
.globl _test1
.align 2
_test1: @ @test1
@ BB#0:
push {r7}
mov r7, sp
sub sp, sp, #20
bic sp, sp, #7
add r1, r0, #48
add r2, r0, #32
vld1.64 {d24, d25}, [r0:128]
vld1.64 {d16, d17}, [r1:128]
vld1.64 {d18, d19}, [r2:128]
add r1, r0, #16
vmovn.i32 d22, q8
vld1.64 {d16, d17}, [r1:128]
vmovn.i32 d20, q9
vmovn.i32 d18, q12
vmov.u16 r0, d22[3]
strb r0, [sp, #15]
vmov.u16 r0, d22[2]
strb r0, [sp, #14]
vmov.u16 r0, d22[1]
strb r0, [sp, #13]
vmov.u16 r0, d22[0]
vmovn.i32 d16, q8
strb r0, [sp, #12]
vmov.u16 r0, d20[3]
strb r0, [sp, #11]
vmov.u16 r0, d20[2]
strb r0, [sp, #10]
vmov.u16 r0, d20[1]
strb r0, [sp, #9]
vmov.u16 r0, d20[0]
strb r0, [sp, #8]
vmov.u16 r0, d18[3]
strb r0, [sp, #3]
vmov.u16 r0, d18[2]
strb r0, [sp, #2]
vmov.u16 r0, d18[1]
strb r0, [sp, #1]
vmov.u16 r0, d18[0]
strb r0, [sp]
vmov.u16 r0, d16[3]
strb r0, [sp, #7]
vmov.u16 r0, d16[2]
strb r0, [sp, #6]
vmov.u16 r0, d16[1]
strb r0, [sp, #5]
vmov.u16 r0, d16[0]
strb r0, [sp, #4]
vldmia sp, {d16, d17}
vmov r0, r1, d16
vmov r2, r3, d17
mov sp, r7
pop {r7}
bx lr
.globl _test2
.align 2
_test2: @ @test2
@ BB#0:
push {r7}
mov r7, sp
sub sp, sp, #12
bic sp, sp, #7
vld1.64 {d16, d17}, [r0:128]
add r0, r0, #16
vld1.64 {d20, d21}, [r0:128]
vmovn.i32 d18, q8
vmov.u16 r0, d18[3]
vmovn.i32 d16, q10
strb r0, [sp, #3]
vmov.u16 r0, d18[2]
strb r0, [sp, #2]
vmov.u16 r0, d18[1]
strb r0, [sp, #1]
vmov.u16 r0, d18[0]
strb r0, [sp]
vmov.u16 r0, d16[3]
strb r0, [sp, #7]
vmov.u16 r0, d16[2]
strb r0, [sp, #6]
vmov.u16 r0, d16[1]
strb r0, [sp, #5]
vmov.u16 r0, d16[0]
strb r0, [sp, #4]
ldm sp, {r0, r1}
mov sp, r7
pop {r7}
bx lr
Now, however, we generate the much more straightforward:
.syntax unified
.section __TEXT,__text,regular,pure_instructions
.globl _test1
.align 2
_test1: @ @test1
@ BB#0:
add r1, r0, #48
add r2, r0, #32
vld1.64 {d20, d21}, [r0:128]
vld1.64 {d16, d17}, [r1:128]
add r1, r0, #16
vld1.64 {d18, d19}, [r2:128]
vld1.64 {d22, d23}, [r1:128]
vmovn.i32 d17, q8
vmovn.i32 d16, q9
vmovn.i32 d18, q10
vmovn.i32 d19, q11
vmovn.i16 d17, q8
vmovn.i16 d16, q9
vmov r0, r1, d16
vmov r2, r3, d17
bx lr
.globl _test2
.align 2
_test2: @ @test2
@ BB#0:
vld1.64 {d16, d17}, [r0:128]
add r0, r0, #16
vld1.64 {d18, d19}, [r0:128]
vmovn.i32 d16, q8
vmovn.i32 d17, q9
vmovn.i16 d16, q8
vmov r0, r1, d16
bx lr
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179989 91177308-0d34-0410-b5e6-96231b3b80d8
With a little help from the frontend, it looks like the standard va_*
intrinsics can do the job.
Also clean up an old bitcast hack in LowerVAARG that dealt with
unaligned double loads. Load SDNodes can specify an alignment now.
Still missing: Calling varargs functions with float arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179961 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, when spilling 64-bit paired registers, an LDMIA with both
a FrameIndex and an offset was produced. This kind of instruction
shouldn't exist, and the extra operand was being confused with the
predicate, causing aborts later on.
This removes the invalid 0-offset from the instruction being
produced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179956 91177308-0d34-0410-b5e6-96231b3b80d8
I think it's almost impossible to fold atomic fences profitably under
LLVM/C++11 semantics. As a result, this is now unused and just
cluttering up the target interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179940 91177308-0d34-0410-b5e6-96231b3b80d8
The getSwappedPredicate function can be used in other places (such as in
improvements to the PPCCTRLoops pass). Instead of trapping it as a static
function in PPCInstrInfo, move it into PPCPredicates with other
predicate-related things.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179926 91177308-0d34-0410-b5e6-96231b3b80d8
trying to move as much FastISel logic as possible out of the main path in
SelectionDAGISel - intermixing them just adds confusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179902 91177308-0d34-0410-b5e6-96231b3b80d8
When matching a compare with a subtract where the arguments of the compare are
swapped w.r.t. the arguments of the subtract, we need to negate the predicates
(or CR bit indices) of the users. This, however, is not the same as inverting
the predicate (negating LT -> GT, but inverting LT -> GE, for example). The ARM
backend seems to do this correctly, but when I adapted the code for the PPC
backend, I introduced an error in this logic.
Comparison optimization is now enabled again by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179899 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for recoded (meaning assembly-language compatible to
standard mips32) arithmetic 32-bit instructions.
Patch by Zoran Jovanovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179873 91177308-0d34-0410-b5e6-96231b3b80d8
InstFlag has a default value of 0 and will simplify the VOP3 patterns.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179829 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to cause a stage-2 LLVM compile failure (by crashing TableGen); do
I'm disabling this for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179807 91177308-0d34-0410-b5e6-96231b3b80d8
variant/dialect. Addresses a FIXME in the emitMnemonicAliases function.
Use and test case to come shortly.
rdar://13688439 and part of PR13340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179804 91177308-0d34-0410-b5e6-96231b3b80d8
Many PPC instructions have a so-called 'record form' which stores to a specific
condition register the result of comparing the result of the instruction with
zero (always as a signed comparison). For integer operations on PPC64, this is
always a 64-bit comparison.
This implementation is derived from the implementation in the ARM backend;
there are some differences because PPC condition registers are allocatable
virtual registers (although the record forms always use a specific one), and we
look for a matching subtraction instruction after the compare (but before the
first use) in addition to before it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179802 91177308-0d34-0410-b5e6-96231b3b80d8
In X86FastISel::X86SelectStore(), improperly aligned stores are rejected and
handled by the DAG-based ISel. However, X86FastISel::X86SelectLoad() makes
no such requirement. There doesn't appear to be an x86 architectural
correctness issue with allowing potentially unaligned store instructions.
This patch removes this restriction.
Patch by Jim Stichnot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179774 91177308-0d34-0410-b5e6-96231b3b80d8
unable to handle cases such as __asm mov eax, 8*-8.
This patch also attempts to simplify the state machine. Further, the error
reporting has been improved. Test cases included, but more will be added to
the clang side shortly.
rdar://13668445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179719 91177308-0d34-0410-b5e6-96231b3b80d8
for the sdiv/srem/udiv/urem bitcode instructions. This is done for the i8,
i16, and i32 types, as well as i64 for the x86_64 target.
Patch by Jim Stichnoth
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179715 91177308-0d34-0410-b5e6-96231b3b80d8
The reference manual defines only 5 permitted values for the immediate field of the "hint" instruction:
1. nop (imm == 0)
2. yield (imm == 1)
3. wfe (imm == 2)
4. wfi (imm == 3)
5. sev (imm == 4)
Therefore, restrict the permitted values for the "hint" instruction to 0 through 4.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179707 91177308-0d34-0410-b5e6-96231b3b80d8
A couple of recently introduced conditional branch patterns
also need to be marked as isCodeGenOnly since they cannot
be handled by the asm parser.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179690 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the Mips assembler to parse and emit nested
expressions as instruction operands. It also extends the
expansion of memory instructions when an offset is given as
an expression.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179657 91177308-0d34-0410-b5e6-96231b3b80d8
These are aliases for VACGT and VACGE, respectively, with the source
operands reversed.
rdar://13638090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179575 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the assembler to recognize $fcc0
as a valid register for conditional move instructions.
Corresponding test cases have been added.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179567 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of emitting config values in a predefined order, the code
emitter will now emit a 32-bit register index followed by the 32-bit
config value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179546 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the CR spilling issues have been resolved, we can remove the
unmodeled-side-effect attributes from the comparison instructions (and also
mark them as isCompare). By allowing these, by default, to have unmodeled side
effects, we were hiding problems with CR spilling; but everything seems much
happier now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179502 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition
registers, the spill location is specified relative to the stack pointer (SP +
8). However, this is not relative to the SP after the new stack frame is
established, but instead relative to the caller's stack pointer (it is stored
into the linkage area of the parent's stack frame).
So, like with the link register, we don't directly spill the CRs with other
callee-saved registers, but just mark them to be spilled during prologue
generation.
In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
This is the default model for non-PIC 64-bit code. It supports
text+data+bss linked anywhere in the low 16 TB of the address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179473 91177308-0d34-0410-b5e6-96231b3b80d8
64-bit code models need multiple relocations that can't be inferred from
the opcode like they can in 32-bit code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179472 91177308-0d34-0410-b5e6-96231b3b80d8
SDNodes and MachineOperands get target flags representing the %hi() and
%lo() assembly annotations that eventually become relocations.
Also define flags to be used by the 64-bit code models.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179468 91177308-0d34-0410-b5e6-96231b3b80d8
Leaving MFCR has having unmodeled side effects is not enough to prevent
unwanted instruction reordering post-RA. We could probably apply a stronger
barrier attribute, but there is a better way: Add all (not just the first) CR
to be spilled as live-in to the entry block, and add all CRs to the MFCR
instruction as implicitly killed.
Unfortunately, I don't have a small test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179465 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, only abs32 and pic32 are implemented. Add a test case for
abs32 with 64-bit code. 64-bit PIC code is currently broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179463 91177308-0d34-0410-b5e6-96231b3b80d8
For functions that need to spill CRs, and have dynamic stack allocations, the
value of the SP during the restore is not what it was during the save, and so
we need to use the FP in these cases (as for all of the other spills and
restores, but the CR restore has a special code path because its reserved slot,
like the link register, is specified directly relative to the adjusted SP).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179457 91177308-0d34-0410-b5e6-96231b3b80d8
The initial values were arbitrary. I want them to be more
conservative. This represents the number of latency cycles hidden by
OOO execution. In practice, I think it should be within a small factor
of the complex floating point operation latency so the scheduler can
make some attempt to hide latency even for smallish blocks.
These are by no means the best values, just a starting point for
tuning heuristics. Some benchmarks such as TSVC run faster with this
lower value for SandyBridge. I haven't run anything on Haswell, but
it's shouldn't be 2x SB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179450 91177308-0d34-0410-b5e6-96231b3b80d8
I need to handle this for the test case in my following scheduler
commit.
Work is already under way to redesign the mechanism for node order
propagation because this case by case approach is unmaintainable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179448 91177308-0d34-0410-b5e6-96231b3b80d8
is a follow on to r179393 and r179399. Test case to be added on
the clang side.
Part of rdar://13453209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179403 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.
This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179398 91177308-0d34-0410-b5e6-96231b3b80d8
immediate displacement. Specifically, add support for generating the proper IR.
We've been able to parse this for some time now. Test case to be added on the
clang side.
Part of rdar://13453209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179393 91177308-0d34-0410-b5e6-96231b3b80d8
TableGen will not combine nested list 'let' bindings into a single list, and
instead uses only the inner scope. As a result, several instruction definitions
were missing implicit register defs that were in outer scopes. This de-nests
these scopes and makes all instructions have only one let binding which sets
implicit register definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179392 91177308-0d34-0410-b5e6-96231b3b80d8
This is prep. work for the implementation of optimizeCompare. Many PPC
instructions have 'record' forms (in almost all cases, this means that the RC
bit is set) that cause the result of the instruction to be compared with zero,
and the result of that comparison saved in a predefined condition register. In
order to add the record forms of the instructions without too much
copy-and-paste, the relevant functions have been refactored into multiclasses
which define both the record and normal forms.
Also, two TableGen-generated mapping functions have been added which allow
querying the instruction code for the record form given the normal form (and
vice versa).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179356 91177308-0d34-0410-b5e6-96231b3b80d8
variables that use namespace alias qualifiers. Test case coming on clang side
shortly.
Part of rdar://13499009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179343 91177308-0d34-0410-b5e6-96231b3b80d8
can build up the identifier string. No test case as support for looking up
these type of identifiers hasn't been implemented on the clang side.
Part of rdar://13499009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179336 91177308-0d34-0410-b5e6-96231b3b80d8
specific logic. This makes the code much less fragile. Test case coming on the
clang side in a moment.
rdar://13634327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179323 91177308-0d34-0410-b5e6-96231b3b80d8
A64Imms::isLogicalImmBits and A64Imms::isLogicalImm will attempt to
execute shifts that perform undefined behavior. Instead of attempting
to perform the 64-bit rotation, treat it as a no-op.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179317 91177308-0d34-0410-b5e6-96231b3b80d8
As packed comparisons in AVX/SSE produce all 0s or all 1s in each SIMD lane,
vector select could be simplified to AND/OR or removed if one or both values
being selected is all 0s or all 1s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179267 91177308-0d34-0410-b5e6-96231b3b80d8
As these two instructions in AVX extension are privileged instructions for
special purpose, it's only expected to be used in inlined assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179266 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is revised based on patch from Victor Umansky
<victor.umansky@intel.com>. More cases are handled in X86's bool
simplification, i.e.
- SETCC_CARRY
- value is truncated to i1 with AND
As a by-product, PR5443 is also fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179265 91177308-0d34-0410-b5e6-96231b3b80d8
Because of how predication in implemented on PPC (only for branches), I think
that this is the right thing to do. No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179252 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179240 91177308-0d34-0410-b5e6-96231b3b80d8
into the operand array of the start of the memory reference descriptor.
Additional code in EncodeInstruction provides an additional adjustment.
This patch places that additional code in a separate function,
called getOperandBias, so that any caller of getMemoryOperandNo
can also call getOperandBias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179211 91177308-0d34-0410-b5e6-96231b3b80d8
wasn't always the start of the operand. If there was a symbol reference, then
Start pointed to that token. It's very likely there are other places that need
to be updated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179210 91177308-0d34-0410-b5e6-96231b3b80d8
I've not seen this happen in practice, and probably can't until we start
allowing decrement-counter-based conditional branches to be double predicated,
but just in case, don't allow predication of a diamond in which both sides have
ctr-defining branches. Even though the branching behavior of these can be
predicated, the counter-decrementing behavior cannot be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179199 91177308-0d34-0410-b5e6-96231b3b80d8
Test cases that regressed due to r179115, plus a few more, were added in
r179182. Original commit message below:
[ms-inline asm] Use parsePrimaryExpr in lieu of parseExpression if we need to
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
Part of rdar://13611297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179187 91177308-0d34-0410-b5e6-96231b3b80d8
Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this
would happen as long as floating point instructions are not needed.
Probably it would also make sense to compile as mips32 if atomic operations
are needed too. There may be other cases too.
A module pass prescans the IR and adds the mips16 or nomips16 attribute
to functions depending on the functions needs.
Mips 16 mode can result in a 40% code compression by utililizing 16 bit
encoding of many instructions.
The hope is for this to replace the traditional gcc way of dealing with
Mips16 code using floating point which involves essentially using soft float
but with a library implemented using mips32 floating point. This gcc
method also requires creating stubs so that Mips32 code can interact with
these Mips 16 functions that have floating point needs. My conjecture is
that in reality this traditional gcc method would never win over this
new method.
I will be implementing the traditional gcc method also. Some of it is already
done but I needed to do the stubs to finish the work and those required
this mips16/32 mixed mode capability.
I have more ideas for to make this new method much better and I think the old
method will just live in llvm for anyone that needs the backward compatibility
but I don't for what reason that would be needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
Depending on the number of bits set in the writemask.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179166 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179165 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179164 91177308-0d34-0410-b5e6-96231b3b80d8
This adds in-principle support for if-converting the bctr[l] instructions.
These instructions are used for indirect branching. It seems, however, that the
current if converter will never actually predicate these. To do so, it would
need the ability to hoist a few setup insts. out of the conditionally-executed
block. For example, code like this:
void foo(int a, int (*bar)()) { if (a != 0) bar(); }
becomes:
...
beq 0, .LBB0_2
std 2, 40(1)
mr 12, 4
ld 3, 0(4)
ld 11, 16(4)
ld 2, 8(4)
mtctr 3
bctrl
ld 2, 40(1)
.LBB0_2:
...
and it would be safe to do all of this unconditionally with a predicated
beqctrl instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179156 91177308-0d34-0410-b5e6-96231b3b80d8
Modifier 'D' is to use the second word of a double integer.
We had previously implemented the pure register varient of
the modifier and this patch implements the memory reference.
#include "stdio.h"
int b[8] = {0,1,2,3,4,5,6,7};
void main()
{
int i;
// The first word. Notice, no 'D'
{asm (
"lw %0,%1;"
: "=r" (i)
: "m" (*(b+4))
);}
printf("%d\n",i);
// The second word
{asm (
"lw %0,%D1;"
: "=r" (i)
: "m" (*(b+4))
);}
printf("%d\n",i);
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179135 91177308-0d34-0410-b5e6-96231b3b80d8
This enables us to form predicated branches (which are the same conditional
branches we had before) and also a larger set of predicated returns (including
instructions like bdnzlr which is a conditional return and loop-counter
decrement all in one).
At the moment, if conversion does not capture all possible opportunities. A
simple example is provided in early-ret2.ll, where if conversion forms one
predicated return, and then the PPCEarlyReturn pass picks up the other one. So,
at least for now, we'll keep both mechanisms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179134 91177308-0d34-0410-b5e6-96231b3b80d8
and mips16 on a per function basis.
Because this patch is somewhat involved I have provide an overview of the
key pieces of it.
The patch is written so as to not change the behavior of the non mixed
mode. We have tested this a lot but it is something new to switch subtargets
so we don't want any chance of regression in the mainline compiler until
we have more confidence in this.
Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1.
For that reason there are derived versions of the register info, frame info,
instruction info and instruction selection classes.
Now we register three separate passes for instruction selection.
One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then
one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and
MipsSEISelDAGToDAG.cpp).
When the ModuleISel pass runs, it determines if there is a need to switch
subtargets and if so, the owning pointers in MipsTargetMachine are
appropriately changed.
When 16Isel or SEIsel is run, they will return immediately without doing
any work if the current subtarget mode does not apply to them.
In addition, MipsAsmPrinter needs to be reset on a function basis.
The pass BasicTargetTransformInfo is substituted with a null pass since the
pass is immutable and really needs to be a function pass for it to be
used with changing subtargets. This will be fixed in a follow on patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
The existing test cases exercise this patch.
rdar://13611297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179115 91177308-0d34-0410-b5e6-96231b3b80d8
Some general cleanup and only scan the end of a BB for branches (once we're
done with the terminators and debug values, then there should not be any other
branches). These address post-commit review suggestions by Bill Schmidt.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179112 91177308-0d34-0410-b5e6-96231b3b80d8
rather than deriving the StringRef from the Start and End SMLocs.
Using the Start and End SMLocs works fine for operands such as [Symbol], but
not for operands such as [Symbol + ImmDisp]. All existing test cases that
reference a variable exercise this patch.
rdar://13602265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179109 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, non-vector loads and stores have r+i forms; however, in functions
with large stack frames these were not being used to access slots far from the
stack pointer because such slots were out of range for the signed 16-bit
immediate offset field. This increases register pressure because we need a
separate register for each offset (when the r+r form is used). By enabling
virtual base registers, we can deal with large stack frames without unduly
increasing register pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179105 91177308-0d34-0410-b5e6-96231b3b80d8
The save area is twice as big and there is no struct return slot. The
stack pointer is always 16-byte aligned (after adding the bias).
Also eliminate the stack adjustment instructions around calls when the
function has a reserved stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179083 91177308-0d34-0410-b5e6-96231b3b80d8
The costs are overfitted so that I can still use the legalization factor.
For example the following kernel has about half the throughput vectorized than
unvectorized when compiled with SSE2. Before this patch we would vectorize it.
unsigned short A[1024];
double B[1024];
void f() {
int i;
for (i = 0; i < 1024; ++i) {
B[i] = (double) A[i];
}
}
radar://13599001
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179033 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC has a conditional branch to the link register (return) instruction: BCLR.
This should be used any time when we'd otherwise have a conditional branch to a
return. This adds a small pass, PPCEarlyReturn, which runs just prior to the
branch selection pass (and, importantly, after block placement) to generate
these conditional returns when possible. It will also eliminate unconditional
branches to returns (these happen rarely; most of the time these have already
been tail duplicated by the time PPCEarlyReturn is invoked). This is a nice
optimization for small functions that do not maintain a stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179026 91177308-0d34-0410-b5e6-96231b3b80d8
I've managed to convince myself that AArch64's acquire/release
instructions are sufficient to guarantee C++11's required semantics,
even in the sequentially-consistent case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179005 91177308-0d34-0410-b5e6-96231b3b80d8
First, we should not cheat: fsel-based lowering of select_cc is a
finite-math-only optimization (the ISA manual, section F.3 of v2.06, makes
this clear, as does a note in our own README).
This also adds fsel-based lowering of EQ and NE condition codes. As it turned
out, fsel generation was covered by a grand total of zero regression test
cases. I've added some test cases to cover the existing behavior (which is now
finite-math only), as well as the new EQ cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179000 91177308-0d34-0410-b5e6-96231b3b80d8
Integer return values are sign or zero extended by the callee, and
structs up to 32 bytes in size can be returned in registers.
The CC_Sparc64 CallingConv definition is shared between
LowerFormalArguments_64 and LowerReturn_64. Function arguments and
return values are passed in the same registers.
The inreg flag is also used for return values. This is required to handle
C functions returning structs containing floats and ints:
struct ifp {
int i;
float f;
};
struct ifp f(void);
LLVM IR:
define inreg { i32, float } @f() {
...
ret { i32, float } %retval
}
The ABI requires that %retval.i is returned in the high bits of %i0
while %retval.f goes in %f1.
Without the inreg return value attribute, %retval.i would go in %i0 and
%retval.f would go in %f3 which is a more efficient way of returning
%multiple values, but it is not ABI compliant for returning C structs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178966 91177308-0d34-0410-b5e6-96231b3b80d8
64-bit SPARC v9 processes use biased stack and frame pointers, so the
current function's stack frame is located at %sp+BIAS .. %fp+BIAS where
BIAS = 2047.
This makes more local variables directly accessible via [%fp+simm13]
addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178965 91177308-0d34-0410-b5e6-96231b3b80d8
There are certain PPC instructions into which we can fold a zero immediate
operand. We can detect such cases by looking at the register class required
by the using operand (so long as it is not otherwise constrained).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178961 91177308-0d34-0410-b5e6-96231b3b80d8
All arguments are formally assigned to stack positions and then promoted
to floating point and integer registers. Since there are more floating
point registers than integer registers, this can cause situations where
floating point arguments are assigned to registers after integer
arguments that where assigned to the stack.
Use the inreg flag to indicate 32-bit fragments of structs containing
both float and int members.
The three-way shadowing between stack, integer, and floating point
registers requires custom argument lowering. The good news is that
return values are passed in the exact same way, and we can share the
code.
Still missing:
- Update LowerReturn to handle structs returned in registers.
- LowerCall.
- Variadic functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178958 91177308-0d34-0410-b5e6-96231b3b80d8
The code emitter knows how to encode operands whose name matches one of
the encoding fields. If there is no match, the code emitter relies on
the order of the operand and field definitions to determine how operands
should be encoding. Matching by order makes it easy to accidentally break
the instruction encodings, so we prefer to match by name.
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178930 91177308-0d34-0410-b5e6-96231b3b80d8
SITargetLowering::analyzeImmediate() was converting the 64-bit values
to 32-bit and then checking if they were an inline immediate. Some
of these conversions caused this check to succeed and produced
S_MOV instructions with 64-bit immediates, which are illegal.
v2:
- Clean up logic
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178927 91177308-0d34-0410-b5e6-96231b3b80d8
On cores for which we know the misprediction penalty, and we have
the isel instruction, we can profitably perform early if conversion.
This enables us to replace some small branch sequences with selects
and avoid the potential stalls from mispredicting the branches.
Enabling this feature required implementing canInsertSelect and
insertSelect in PPCInstrInfo; isel code in PPCISelLowering was
refactored to use these functions as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178926 91177308-0d34-0410-b5e6-96231b3b80d8
The manual states that there is a minimum of 13 cycles from when the
mispredicted branch is issued to when the correct branch target is
issued.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178925 91177308-0d34-0410-b5e6-96231b3b80d8
During LTO, the target options on functions within the same Module may
change. This would necessitate resetting some of the back-end. Do this for X86,
because it's a Friday afternoon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178917 91177308-0d34-0410-b5e6-96231b3b80d8
memory operands.
Essentially, this layers an infix calculator on top of the parsing state
machine. The scale on the index register is still expected to be an immediate
__asm mov eax, [eax + ebx*4]
and will not work with more complex expressions. For example,
__asm mov eax, [eax + ebx*(2*2)]
The plus and minus binary operators assume the numeric value of a register is
zero so as to not change the displacement. Register operands should never
be an operand for a multiply or divide operation; the scale*indexreg
expression is always replaced with a zero on the operand stack to prevent
such a case.
rdar://13521380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178881 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2 has efficient support for shifts by a scalar. My previous change of making
shifts expensive did not take this into account marking all shifts as expensive.
This would prevent vectorization from happening where it is actually beneficial.
With this change we differentiate between shifts of constants and other shifts.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178808 91177308-0d34-0410-b5e6-96231b3b80d8
On certain architectures we can support efficient vectorized version of
instructions if the operand value is uniform (splat) or a constant scalar.
An example of this is a vector shift on x86.
We can efficiently support
for (i = 0 ; i < ; i += 4)
w[0:3] = v[0:3] << <2, 2, 2, 2>
but not
for (i = 0; i < ; i += 4)
w[0:3] = v[0:3] << x[0:3]
This patch adds a parameter to getArithmeticInstrCost to further qualify operand
values as uniform or uniform constant.
Targets can then choose to return a different cost for instructions with such
operand values.
A follow-up commit will test this feature on x86.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178807 91177308-0d34-0410-b5e6-96231b3b80d8
BCL is normally a conditional branch-and-link instruction, but has
an unconditional form (which is used in the SjLj code, for example).
To make clear that this BCL instruction definition is specifically
the special unconditional form (which does not meaningfully take
a condition-register input), rename it to BCLalways.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178803 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombine logic that recognized a/sqrt(b) and transformed it into
a multiplication by the reciprocal sqrt did not handle cases where the
sqrt and the division were separated by an fpext or fptrunc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178801 91177308-0d34-0410-b5e6-96231b3b80d8
It fixes following tests for Hexagon:
CodeGen/Generic/2003-07-29-BadConstSbyte.ll
CodeGen/Generic/2005-10-21-longlonggtu.ll
CodeGen/Generic/2009-04-28-i128-cmp-crash.ll
CodeGen/Generic/MachineBranchProb.ll
CodeGen/Generic/builtin-expect.ll
CodeGen/Generic/pr12507.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178794 91177308-0d34-0410-b5e6-96231b3b80d8
At the time when the XCore backend was added there were some issues with
with overlapping register classes but these all seem to be fixed now.
Describing the register classes correctly allow us to get rid of a
codegen only instruction (LDAWSP_lru6_RRegs) and it means we can
disassemble ru6 instructions that use registers above r11.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178782 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2SizeReduction pass avoids false CPSR dependencies, except it
still aggressively creates tMOVi8 instructions because they are so
common.
Avoid creating false CPSR dependencies even for tMOVi8 instructions when
the the CPSR flags are known to have high latency. This allows integer
computation to overlap floating point computations.
Also process blocks in a reverse post-order and propagate high-latency
flags to successors.
<rdar://problem/13468102>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178773 91177308-0d34-0410-b5e6-96231b3b80d8
